mirror of https://gitee.com/openkylin/linux.git
ARM: Kirkwood: DT board setup for LaPlug
This patch adds DT board setup for the LaCie NAS LaPlug. Chipset list: - CPU MARVELL 88FR131 800Mhz - SDRAM memory: 128MB DDR2-800 400Mhz - 1 Ethernet Gigabit port (PHY MARVELL 88E1318) - 1 Mini PCI-Express port - 1 NAND 512 MB - 1 push button - 2 LEDs (red and blue) - 4 USB Ports Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit is contained in:
parent
e38cd3ae6e
commit
2cc64b5655
|
@ -85,6 +85,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
|
|||
kirkwood-iomega_ix2_200.dtb \
|
||||
kirkwood-is2.dtb \
|
||||
kirkwood-km_kirkwood.dtb \
|
||||
kirkwood-laplug.dtb \
|
||||
kirkwood-lschlv2.dtb \
|
||||
kirkwood-lsxhl.dtb \
|
||||
kirkwood-mplcec4.dtb \
|
||||
|
|
|
@ -0,0 +1,175 @@
|
|||
/*
|
||||
* Copyright (C) 2013 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "kirkwood.dtsi"
|
||||
#include "kirkwood-6192.dtsi"
|
||||
|
||||
/ {
|
||||
model = "LaCie LaPlug";
|
||||
compatible = "lacie,laplug", "marvell,kirkwood-88f6192", "marvell,kirkwood";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x8000000>; /* 128 MB */
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
};
|
||||
|
||||
mbus {
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
pcie@1,0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
serial@12000 {
|
||||
pinctrl-0 = <&pmx_uart0>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c@11000 {
|
||||
pinctrl-0 = <&pmx_twsi0>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "at,24c04";
|
||||
pagesize = <16>;
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl: pinctrl@10000 {
|
||||
pmx_usb_power_enable: pmx-usb-power-enable {
|
||||
marvell,pins = "mpp14";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
button@1{
|
||||
label = "Power push button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
red-fail {
|
||||
label = "laplug_v2:red:power";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
blue-power {
|
||||
label = "laplug_v2:blue:power";
|
||||
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
};
|
||||
|
||||
gpio_poweroff {
|
||||
compatible = "gpio-poweroff";
|
||||
gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_usb_power_enable>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
usb_power_back1: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "USB Power Back 1";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb_power_back2: regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "USB Power Back 2";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb_power_front: regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
regulator-name = "USB Power Front";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
/* Total size : 512MB */
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pmx_nand>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x100000>; /* 1MB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "uImage";
|
||||
reg = <0x100000 0x1000000>; /* 16MB */
|
||||
};
|
||||
|
||||
partition@1100000 {
|
||||
label = "rootfs";
|
||||
reg = <0x1100000 0x1EF00000>; /* 495MB */
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
ethphy0: ethernet-phy@0 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
ethernet0-port@0 {
|
||||
phy-handle = <ðphy0>;
|
||||
};
|
||||
};
|
Loading…
Reference in New Issue