openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

USB-serial updates for v4.16-rc1 

Here are the USB-serial updates for 4.16-rc1, including:
 
  - a fix for a potential sleep-while-atomic (warning) in an io_edgeport
    error path
  - removal of a dummy TIOCSSERIAL implementation in ark3116
  - new features for Fintek F81532/534 devices:
    - support for higher baud rates (up to 1.5 Mbps)
    - support for auto-RTS (for RS-485)
    - support for transceiver configuration
    - support for detecting disabled ports
 
 Included are also various clean ups.
 
 All have been (at least compile tested) in linux-next without any
 reported issues.
 
 Signed-off-by: Johan Hovold <johan@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEHszNKQClByu0A+9RQQ3kT97htJUFAlpY9EkRHGpvaGFuQGtl
 cm5lbC5vcmcACgkQQQ3kT97htJXbOg//aD2Pl64/bzAA22t2KYzXlFcciktnvNNG
 aE8vf4u8VM3INr+4IdwAH+8cgl6lb2cLxdat/CCTofhjgJKUQE5Kb71JEUgUlOyZ
 DE3blC9UFBe4qL1fe1IwXCK/WhlJCGzwuEECsDzG2jb0EuClpSU1sKh9K9cBYtfT
 ozNSGYse9Kcym6PHaemDzU2u30nXcBirldpdu2W7x1qepYWwJcP7x8IQWKrZvwY7
 PCDqo3fDwS+Q/5GuPw2SX9IK0jZiuKyIhE6JBlsKQEpzfFPZv7XWeP+AKitgCsAp
 SfF1+C33P/qO5X2IprlVr9EhDk5Q5FoRBMhcb2OODiTwHaLpPH9hAScGuRFDkXuf
 x/obA2IowKsisulYCAo9scRdpnDZFrPp1csJpgPSYVW/K0rXG7XVe89k96iEgdOS
 BqvJQoRwOa2ctvM4VoDTAdCtlyV2cnEVQXIYlK+5jggTP8CpTqyvVvCnwoaHC/CP
 asg+Zgxf5cNaaNsw0VA+zEkdi+KsZl7K1aqI8VVWaMcKasMChA+YywX/T9WSL4+c
 dnkw09AHXbJbcQ9HAL5kqJfvc2OlpN1le+nrRQ8+uPpzhqqBV/0dqnH7uA8HLkcs
 ilQ5L+IVWSuY1v7YULXTPydM4uAY+rLBz4VEHUCrC7IWdTYw4t/CfrvQDnsBh/uw
 9OBUIFD/HX0=
 =ZTZB
 -----END PGP SIGNATURE-----

Merge tag 'usb-serial-4.16-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next

Johan writes:

USB-serial updates for v4.16-rc1

Here are the USB-serial updates for 4.16-rc1, including:

 - a fix for a potential sleep-while-atomic (warning) in an io_edgeport
   error path
 - removal of a dummy TIOCSSERIAL implementation in ark3116
 - new features for Fintek F81532/534 devices:
   - support for higher baud rates (up to 1.5 Mbps)
   - support for auto-RTS (for RS-485)
   - support for transceiver configuration
   - support for detecting disabled ports

Included are also various clean ups.

All have been (at least compile tested) in linux-next without any
reported issues.

Signed-off-by: Johan Hovold <johan@kernel.org>
This commit is contained in:
Greg Kroah-Hartman 2018-01-13 15:05:21 +01:00
parent 0dbbad992b d1c48227d7
commit 2da050e4f1
4 changed files with 318 additions and 125 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

49
drivers/usb/serial/ark3116.c
View File

@ -83,7 +83,10 @@ static int ark3116_write_reg(struct usb_serial *serial,
usb_sndctrlpipe(serial->dev, 0),
0xfe, 0x40, val, reg,
NULL, 0, ARK_TIMEOUT);
return result;
if (result)
return result;
return 0;
}
static int ark3116_read_reg(struct usb_serial *serial,
@ -105,7 +108,7 @@ static int ark3116_read_reg(struct usb_serial *serial,
return result;
}
return buf[0];
return 0;
}
static inline int calc_divisor(int bps)
@ -355,13 +358,13 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
/* read modem status */
result = ark3116_read_reg(serial, UART_MSR, buf);
if (result < 0)
if (result)
goto err_close;
priv->msr = *buf;
/* read line status */
result = ark3116_read_reg(serial, UART_LSR, buf);
if (result < 0)
if (result)
goto err_close;
priv->lsr = *buf;
@ -394,31 +397,35 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
return result;
}
static int ark3116_get_serial_info(struct usb_serial_port *port,
struct serial_struct __user *retinfo)
{
struct serial_struct tmp;
memset(&tmp, 0, sizeof(tmp));
tmp.type = PORT_16654;
tmp.line = port->minor;
tmp.port = port->port_number;
tmp.baud_base = 460800;
if (copy_to_user(retinfo, &tmp, sizeof(tmp)))
return -EFAULT;
return 0;
}
static int ark3116_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
struct serial_struct serstruct;
void __user *user_arg = (void __user *)arg;
switch (cmd) {
case TIOCGSERIAL:
/* XXX: Some of these values are probably wrong. */
memset(&serstruct, 0, sizeof(serstruct));
serstruct.type = PORT_16654;
serstruct.line = port->minor;
serstruct.port = port->port_number;
serstruct.custom_divisor = 0;
serstruct.baud_base = 460800;
if (copy_to_user(user_arg, &serstruct, sizeof(serstruct)))
return -EFAULT;
return 0;
case TIOCSSERIAL:
if (copy_from_user(&serstruct, user_arg, sizeof(serstruct)))
return -EFAULT;
return 0;
return ark3116_get_serial_info(port, user_arg);
default:
break;
}
return -ENOIOCTLCMD;

392
drivers/usb/serial/f81534.c
View File

@ -41,6 +41,7 @@
#define F81534_MODEM_CONTROL_REG (0x04 + F81534_UART_BASE_ADDRESS)
#define F81534_LINE_STATUS_REG (0x05 + F81534_UART_BASE_ADDRESS)
#define F81534_MODEM_STATUS_REG (0x06 + F81534_UART_BASE_ADDRESS)
#define F81534_CLOCK_REG (0x08 + F81534_UART_BASE_ADDRESS)
#define F81534_CONFIG1_REG (0x09 + F81534_UART_BASE_ADDRESS)
#define F81534_DEF_CONF_ADDRESS_START 0x3000
@ -51,13 +52,14 @@
#define F81534_CUSTOM_NO_CUSTOM_DATA 0xff
#define F81534_CUSTOM_VALID_TOKEN 0xf0
#define F81534_CONF_OFFSET 1
#define F81534_CONF_GPIO_OFFSET 4
#define F81534_MAX_DATA_BLOCK 64
#define F81534_MAX_BUS_RETRY 20
/* Default URB timeout for USB operations */
#define F81534_USB_MAX_RETRY 10
#define F81534_USB_TIMEOUT 1000
#define F81534_USB_TIMEOUT 2000
#define F81534_SET_GET_REGISTER 0xA0
#define F81534_NUM_PORT 4
@ -96,16 +98,43 @@
#define F81534_CMD_READ 0x03
#define F81534_DEFAULT_BAUD_RATE 9600
#define F81534_MAX_BAUDRATE 115200
#define F81534_PORT_CONF_RS232 0
#define F81534_PORT_CONF_RS485 BIT(0)
#define F81534_PORT_CONF_RS485_INVERT (BIT(0) | BIT(1))
#define F81534_PORT_CONF_MODE_MASK GENMASK(1, 0)
#define F81534_PORT_CONF_DISABLE_PORT BIT(3)
#define F81534_PORT_CONF_NOT_EXIST_PORT BIT(7)
#define F81534_PORT_UNAVAILABLE \
(F81534_PORT_CONF_DISABLE_PORT | F81534_PORT_CONF_NOT_EXIST_PORT)
#define F81534_1X_RXTRIGGER 0xc3
#define F81534_8X_RXTRIGGER 0xcf
/*
* F81532/534 Clock registers (offset +08h)
*
* Bit0: UART Enable (always on)
* Bit2-1: Clock source selector
* 00: 1.846MHz.
* 01: 18.46MHz.
* 10: 24MHz.
* 11: 14.77MHz.
* Bit4: Auto direction(RTS) control (RTS pin Low when TX)
* Bit5: Invert direction(RTS) when Bit4 enabled (RTS pin high when TX)
*/
#define F81534_UART_EN BIT(0)
#define F81534_CLK_1_846_MHZ 0
#define F81534_CLK_18_46_MHZ BIT(1)
#define F81534_CLK_24_MHZ BIT(2)
#define F81534_CLK_14_77_MHZ (BIT(1) | BIT(2))
#define F81534_CLK_MASK GENMASK(2, 1)
#define F81534_CLK_TX_DELAY_1BIT BIT(3)
#define F81534_CLK_RS485_MODE BIT(4)
#define F81534_CLK_RS485_INVERT BIT(5)
static const struct usb_device_id f81534_id_table[] = {
{ USB_DEVICE(FINTEK_VENDOR_ID_1, FINTEK_DEVICE_ID) },
{ USB_DEVICE(FINTEK_VENDOR_ID_2, FINTEK_DEVICE_ID) },
@ -129,12 +158,35 @@ struct f81534_port_private {
struct usb_serial_port *port;
unsigned long tx_empty;
spinlock_t msr_lock;
u32 baud_base;
u8 shadow_mcr;
u8 shadow_lcr;
u8 shadow_msr;
u8 shadow_clk;
u8 phy_num;
};
struct f81534_pin_data {
const u16 reg_addr;
const u8 reg_mask;
};
struct f81534_port_out_pin {
struct f81534_pin_data pin[3];
};
/* Pin output value for M2/M1/M0(SD) */
static const struct f81534_port_out_pin f81534_port_out_pins[] = {
{ { { 0x2ae8, BIT(7) }, { 0x2a90, BIT(5) }, { 0x2a90, BIT(4) } } },
{ { { 0x2ae8, BIT(6) }, { 0x2ae8, BIT(0) }, { 0x2ae8, BIT(3) } } },
{ { { 0x2a90, BIT(0) }, { 0x2ae8, BIT(2) }, { 0x2a80, BIT(6) } } },
{ { { 0x2a90, BIT(3) }, { 0x2a90, BIT(2) }, { 0x2a90, BIT(1) } } },
};
static u32 const baudrate_table[] = { 115200, 921600, 1152000, 1500000 };
static u8 const clock_table[] = { F81534_CLK_1_846_MHZ, F81534_CLK_14_77_MHZ,
F81534_CLK_18_46_MHZ, F81534_CLK_24_MHZ };
static int f81534_logic_to_phy_port(struct usb_serial *serial,
struct usb_serial_port *port)
{
@ -240,6 +292,36 @@ static int f81534_get_register(struct usb_serial *serial, u16 reg, u8 *data)
return status;
}
static int f81534_set_mask_register(struct usb_serial *serial, u16 reg,
u8 mask, u8 data)
{
int status;
u8 tmp;
status = f81534_get_register(serial, reg, &tmp);
if (status)
return status;
tmp &= ~mask;
tmp |= (mask & data);
return f81534_set_register(serial, reg, tmp);
}
static int f81534_set_phy_port_register(struct usb_serial *serial, int phy,
u16 reg, u8 data)
{
return f81534_set_register(serial, reg + F81534_UART_OFFSET * phy,
data);
}
static int f81534_get_phy_port_register(struct usb_serial *serial, int phy,
u16 reg, u8 *data)
{
return f81534_get_register(serial, reg + F81534_UART_OFFSET * phy,
data);
}
static int f81534_set_port_register(struct usb_serial_port *port, u16 reg,
u8 data)
{
@ -460,13 +542,52 @@ static u32 f81534_calc_baud_divisor(u32 baudrate, u32 clockrate)
return DIV_ROUND_CLOSEST(clockrate, baudrate);
}
static int f81534_set_port_config(struct usb_serial_port *port, u32 baudrate,
u8 lcr)
static int f81534_find_clk(u32 baudrate)
{
int idx;
for (idx = 0; idx < ARRAY_SIZE(baudrate_table); ++idx) {
if (baudrate <= baudrate_table[idx] &&
baudrate_table[idx] % baudrate == 0)
return idx;
}
return -EINVAL;
}
static int f81534_set_port_config(struct usb_serial_port *port,
struct tty_struct *tty, u32 baudrate, u32 old_baudrate, u8 lcr)
{
struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
u32 divisor;
int status;
int i;
int idx;
u8 value;
u32 baud_list[] = {baudrate, old_baudrate, F81534_DEFAULT_BAUD_RATE};
for (i = 0; i < ARRAY_SIZE(baud_list); ++i) {
idx = f81534_find_clk(baud_list[i]);
if (idx >= 0) {
baudrate = baud_list[i];
tty_encode_baud_rate(tty, baudrate, baudrate);
break;
}
}
if (idx < 0)
return -EINVAL;
port_priv->baud_base = baudrate_table[idx];
port_priv->shadow_clk &= ~F81534_CLK_MASK;
port_priv->shadow_clk |= clock_table[idx];
status = f81534_set_port_register(port, F81534_CLOCK_REG,
port_priv->shadow_clk);
if (status) {
dev_err(&port->dev, "CLOCK_REG setting failed\n");
return status;
}
if (baudrate <= 1200)
value = F81534_1X_RXTRIGGER; /* 128 FIFO & TL: 1x */
@ -482,7 +603,7 @@ static int f81534_set_port_config(struct usb_serial_port *port, u32 baudrate,
if (baudrate <= 1200)
value = UART_FCR_TRIGGER_1 | UART_FCR_ENABLE_FIFO; /* TL: 1 */
else
value = UART_FCR_R_TRIG_11 | UART_FCR_ENABLE_FIFO; /* TL: 14 */
value = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO; /* TL: 8 */
status = f81534_set_port_register(port, F81534_FIFO_CONTROL_REG,
value);
@ -491,7 +612,7 @@ static int f81534_set_port_config(struct usb_serial_port *port, u32 baudrate,
return status;
}
divisor = f81534_calc_baud_divisor(baudrate, F81534_MAX_BAUDRATE);
divisor = f81534_calc_baud_divisor(baudrate, port_priv->baud_base);
mutex_lock(&port_priv->lcr_mutex);
@ -626,6 +747,70 @@ static int f81534_find_config_idx(struct usb_serial *serial, u8 *index)
return 0;
}
/*
* The F81532/534 will not report serial port to USB serial subsystem when
* H/W DCD/DSR/CTS/RI/RX pin connected to ground.
*
* To detect RX pin status, we'll enable MCR interal loopback, disable it and
* delayed for 60ms. It connected to ground If LSR register report UART_LSR_BI.
*/
static bool f81534_check_port_hw_disabled(struct usb_serial *serial, int phy)
{
int status;
u8 old_mcr;
u8 msr;
u8 lsr;
u8 msr_mask;
msr_mask = UART_MSR_DCD | UART_MSR_RI | UART_MSR_DSR | UART_MSR_CTS;
status = f81534_get_phy_port_register(serial, phy,
F81534_MODEM_STATUS_REG, &msr);
if (status)
return false;
if ((msr & msr_mask) != msr_mask)
return false;
status = f81534_set_phy_port_register(serial, phy,
F81534_FIFO_CONTROL_REG, UART_FCR_ENABLE_FIFO |
UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
if (status)
return false;
status = f81534_get_phy_port_register(serial, phy,
F81534_MODEM_CONTROL_REG, &old_mcr);
if (status)
return false;
status = f81534_set_phy_port_register(serial, phy,
F81534_MODEM_CONTROL_REG, UART_MCR_LOOP);
if (status)
return false;
status = f81534_set_phy_port_register(serial, phy,
F81534_MODEM_CONTROL_REG, 0x0);
if (status)
return false;
msleep(60);
status = f81534_get_phy_port_register(serial, phy,
F81534_LINE_STATUS_REG, &lsr);
if (status)
return false;
status = f81534_set_phy_port_register(serial, phy,
F81534_MODEM_CONTROL_REG, old_mcr);
if (status)
return false;
if ((lsr & UART_LSR_BI) == UART_LSR_BI)
return true;
return false;
}
/*
* We had 2 generation of F81532/534 IC. All has an internal storage.
*
@ -647,14 +832,14 @@ static int f81534_find_config_idx(struct usb_serial *serial, u8 *index)
static int f81534_calc_num_ports(struct usb_serial *serial,
struct usb_serial_endpoints *epds)
{
struct f81534_serial_private *serial_priv;
struct device *dev = &serial->interface->dev;
int size_bulk_in = usb_endpoint_maxp(epds->bulk_in[0]);
int size_bulk_out = usb_endpoint_maxp(epds->bulk_out[0]);
u8 setting[F81534_CUSTOM_DATA_SIZE];
u8 setting_idx;
u8 num_port = 0;
int index = 0;
int status;
size_t i;
int i;
if (size_bulk_out != F81534_WRITE_BUFFER_SIZE ||
size_bulk_in != F81534_MAX_RECEIVE_BLOCK_SIZE) {
@ -662,8 +847,16 @@ static int f81534_calc_num_ports(struct usb_serial *serial,
return -ENODEV;
}
serial_priv = devm_kzalloc(&serial->interface->dev,
sizeof(*serial_priv), GFP_KERNEL);
if (!serial_priv)
return -ENOMEM;
usb_set_serial_data(serial, serial_priv);
mutex_init(&serial_priv->urb_mutex);
/* Check had custom setting */
status = f81534_find_config_idx(serial, &setting_idx);
status = f81534_find_config_idx(serial, &serial_priv->setting_idx);
if (status) {
dev_err(&serial->interface->dev, "%s: find idx failed: %d\n",
__func__, status);
@ -674,11 +867,12 @@ static int f81534_calc_num_ports(struct usb_serial *serial,
* We'll read custom data only when data available, otherwise we'll
* read default value instead.
*/
if (setting_idx != F81534_CUSTOM_NO_CUSTOM_DATA) {
if (serial_priv->setting_idx != F81534_CUSTOM_NO_CUSTOM_DATA) {
status = f81534_read_flash(serial,
F81534_CUSTOM_ADDRESS_START +
F81534_CONF_OFFSET,
sizeof(setting), setting);
sizeof(serial_priv->conf_data),
serial_priv->conf_data);
if (status) {
dev_err(&serial->interface->dev,
"%s: get custom data failed: %d\n",
@ -688,13 +882,13 @@ static int f81534_calc_num_ports(struct usb_serial *serial,
dev_dbg(&serial->interface->dev,
"%s: read config from block: %d\n", __func__,
setting_idx);
serial_priv->setting_idx);
} else {
/* Read default board setting */
status = f81534_read_flash(serial,
F81534_DEF_CONF_ADDRESS_START, F81534_NUM_PORT,
setting);
F81534_DEF_CONF_ADDRESS_START,
sizeof(serial_priv->conf_data),
serial_priv->conf_data);
if (status) {
dev_err(&serial->interface->dev,
"%s: read failed: %d\n", __func__,
@ -708,7 +902,10 @@ static int f81534_calc_num_ports(struct usb_serial *serial,
/* New style, find all possible ports */
for (i = 0; i < F81534_NUM_PORT; ++i) {
if (setting[i] & F81534_PORT_UNAVAILABLE)
if (f81534_check_port_hw_disabled(serial, i))
serial_priv->conf_data[i] |= F81534_PORT_UNAVAILABLE;
if (serial_priv->conf_data[i] & F81534_PORT_UNAVAILABLE)
continue;
++num_port;
@ -720,6 +917,17 @@ static int f81534_calc_num_ports(struct usb_serial *serial,
num_port = 4; /* Nothing found, oldest version IC */
}
/* Assign phy-to-logic mapping */
for (i = 0; i < F81534_NUM_PORT; ++i) {
if (serial_priv->conf_data[i] & F81534_PORT_UNAVAILABLE)
continue;
serial_priv->tty_idx[i] = index++;
dev_dbg(&serial->interface->dev,
"%s: phy_num: %d, tty_idx: %d\n", __func__, i,
serial_priv->tty_idx[i]);
}
/*
* Setup bulk-out endpoint multiplexing. All ports share the same
* bulk-out endpoint.
@ -741,6 +949,7 @@ static void f81534_set_termios(struct tty_struct *tty,
u8 new_lcr = 0;
int status;
u32 baud;
u32 old_baud;
if (C_BAUD(tty) == B0)
f81534_update_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
@ -780,18 +989,14 @@ static void f81534_set_termios(struct tty_struct *tty,
if (!baud)
return;
if (baud > F81534_MAX_BAUDRATE) {
if (old_termios)
baud = tty_termios_baud_rate(old_termios);
else
baud = F81534_DEFAULT_BAUD_RATE;
tty_encode_baud_rate(tty, baud, baud);
}
if (old_termios)
old_baud = tty_termios_baud_rate(old_termios);
else
old_baud = F81534_DEFAULT_BAUD_RATE;
dev_dbg(&port->dev, "%s: baud: %d\n", __func__, baud);
status = f81534_set_port_config(port, baud, new_lcr);
status = f81534_set_port_config(port, tty, baud, old_baud, new_lcr);
if (status < 0) {
dev_err(&port->dev, "%s: set port config failed: %d\n",
__func__, status);
@ -947,7 +1152,7 @@ static int f81534_get_serial_info(struct usb_serial_port *port,
tmp.type = PORT_16550A;
tmp.port = port->port_number;
tmp.line = port->minor;
tmp.baud_base = F81534_MAX_BAUDRATE;
tmp.baud_base = port_priv->baud_base;
if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
return -EFAULT;
@ -1124,79 +1329,6 @@ static void f81534_write_usb_callback(struct urb *urb)
}
}
static int f81534_attach(struct usb_serial *serial)
{
struct f81534_serial_private *serial_priv;
int index = 0;
int status;
int i;
serial_priv = devm_kzalloc(&serial->interface->dev,
sizeof(*serial_priv), GFP_KERNEL);
if (!serial_priv)
return -ENOMEM;
usb_set_serial_data(serial, serial_priv);
mutex_init(&serial_priv->urb_mutex);
/* Check had custom setting */
status = f81534_find_config_idx(serial, &serial_priv->setting_idx);
if (status) {
dev_err(&serial->interface->dev, "%s: find idx failed: %d\n",
__func__, status);
return status;
}
/*
* We'll read custom data only when data available, otherwise we'll
* read default value instead.
*/
if (serial_priv->setting_idx == F81534_CUSTOM_NO_CUSTOM_DATA) {
/*
* The default configuration layout:
* byte 0/1/2/3: uart setting
*/
status = f81534_read_flash(serial,
F81534_DEF_CONF_ADDRESS_START,
F81534_DEF_CONF_SIZE,
serial_priv->conf_data);
if (status) {
dev_err(&serial->interface->dev,
"%s: read reserve data failed: %d\n",
__func__, status);
return status;
}
} else {
/* Only read 8 bytes for mode & GPIO */
status = f81534_read_flash(serial,
F81534_CUSTOM_ADDRESS_START +
F81534_CONF_OFFSET,
sizeof(serial_priv->conf_data),
serial_priv->conf_data);
if (status) {
dev_err(&serial->interface->dev,
"%s: idx: %d get data failed: %d\n",
__func__, serial_priv->setting_idx,
status);
return status;
}
}
/* Assign phy-to-logic mapping */
for (i = 0; i < F81534_NUM_PORT; ++i) {
if (serial_priv->conf_data[i] & F81534_PORT_UNAVAILABLE)
continue;
serial_priv->tty_idx[i] = index++;
dev_dbg(&serial->interface->dev,
"%s: phy_num: %d, tty_idx: %d\n", __func__, i,
serial_priv->tty_idx[i]);
}
return 0;
}
static void f81534_lsr_worker(struct work_struct *work)
{
struct f81534_port_private *port_priv;
@ -1212,15 +1344,54 @@ static void f81534_lsr_worker(struct work_struct *work)
dev_warn(&port->dev, "read LSR failed: %d\n", status);
}
static int f81534_set_port_output_pin(struct usb_serial_port *port)
{
struct f81534_serial_private *serial_priv;
struct f81534_port_private *port_priv;
struct usb_serial *serial;
const struct f81534_port_out_pin *pins;
int status;
int i;
u8 value;
u8 idx;
serial = port->serial;
serial_priv = usb_get_serial_data(serial);
port_priv = usb_get_serial_port_data(port);
idx = F81534_CONF_GPIO_OFFSET + port_priv->phy_num;
value = serial_priv->conf_data[idx];
pins = &f81534_port_out_pins[port_priv->phy_num];
for (i = 0; i < ARRAY_SIZE(pins->pin); ++i) {
status = f81534_set_mask_register(serial,
pins->pin[i].reg_addr, pins->pin[i].reg_mask,
value & BIT(i) ? pins->pin[i].reg_mask : 0);
if (status)
return status;
}
dev_dbg(&port->dev, "Output pin (M0/M1/M2): %d\n", value);
return 0;
}
static int f81534_port_probe(struct usb_serial_port *port)
{
struct f81534_serial_private *serial_priv;
struct f81534_port_private *port_priv;
int ret;
u8 value;
serial_priv = usb_get_serial_data(port->serial);
port_priv = devm_kzalloc(&port->dev, sizeof(*port_priv), GFP_KERNEL);
if (!port_priv)
return -ENOMEM;
/*
* We'll make tx frame error when baud rate from 384~500kps. So we'll
* delay all tx data frame with 1bit.
*/
port_priv->shadow_clk = F81534_UART_EN | F81534_CLK_TX_DELAY_1BIT;
spin_lock_init(&port_priv->msr_lock);
mutex_init(&port_priv->mcr_mutex);
mutex_init(&port_priv->lcr_mutex);
@ -1248,7 +1419,25 @@ static int f81534_port_probe(struct usb_serial_port *port)
if (ret)
return ret;
return 0;
value = serial_priv->conf_data[port_priv->phy_num];
switch (value & F81534_PORT_CONF_MODE_MASK) {
case F81534_PORT_CONF_RS485_INVERT:
port_priv->shadow_clk |= F81534_CLK_RS485_MODE |
F81534_CLK_RS485_INVERT;
dev_dbg(&port->dev, "RS485 invert mode\n");
break;
case F81534_PORT_CONF_RS485:
port_priv->shadow_clk |= F81534_CLK_RS485_MODE;
dev_dbg(&port->dev, "RS485 mode\n");
break;
default:
case F81534_PORT_CONF_RS232:
dev_dbg(&port->dev, "RS232 mode\n");
break;
}
return f81534_set_port_output_pin(port);
}
static int f81534_port_remove(struct usb_serial_port *port)
@ -1387,7 +1576,6 @@ static struct usb_serial_driver f81534_device = {
.write = f81534_write,
.tx_empty = f81534_tx_empty,
.calc_num_ports = f81534_calc_num_ports,
.attach = f81534_attach,
.port_probe = f81534_port_probe,
.port_remove = f81534_port_remove,
.break_ctl = f81534_break_ctl,

1
drivers/usb/serial/io_edgeport.c
View File

@ -2282,7 +2282,6 @@ static int write_cmd_usb(struct edgeport_port *edge_port,
/* something went wrong */
dev_err(dev, "%s - usb_submit_urb(write command) failed, status = %d\n",
__func__, status);
usb_kill_urb(urb);
usb_free_urb(urb);
atomic_dec(&CmdUrbs);
return status;

1
drivers/usb/serial/iuu_phoenix.c
View File

@ -472,7 +472,6 @@ static int iuu_clk(struct usb_serial_port *port, int dwFrq)
}
}
P2 = ((P - PO) / 2) - 4;
DIV = DIV;
PUMP = 0x04;
PBmsb = (P2 >> 8 & 0x03);
PBlsb = P2 & 0xFF;