openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (45 commits)
  [VLAN]: Proc entry is not renamed when vlan device name changes.
  [IPV6]: Fix ICMP relookup error path dst leak
  [ATM] drivers/atm/iphase.c: compilation warning fix
  IPv6: do not create temporary adresses with too short preferred lifetime
  IPv6: only update the lifetime of the relevant temporary address
  bluetooth : __rfcomm_dlc_close lock fix
  bluetooth : use lockdep sub-classes for diffrent bluetooth protocol
  [ROSE/AX25] af_rose: rose_release() fix
  mac80211: correct use_short_preamble handling
  b43: Fix PCMCIA IRQ routing
  b43: Add DMA mapping failure messages
  mac80211: trigger ieee80211_sta_work after opening interface
  [LLC]: skb allocation size for responses
  [IP] UDP: Use SEQ_START_TOKEN.
  [NET]: Remove Documentation/networking/sk98lin.txt
  [ATM] atm/idt77252.c: Make 2 functions static
  [ATM]: Make atm/he.c:read_prom_byte() static
  [IPV6] MCAST: Ensure to check multicast listener(s).
  [LLC]: Kill llc_station_mac_sa symbol export.
  forcedeth: fix locking bug with netconsole
  ...
This commit is contained in:
Linus Torvalds 2008-04-02 07:46:18 -07:00
parent d40c2f29f3 802fb176d8
commit 2f819ae881
69 changed files with 323 additions and 751 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
Documentation/networking/00-INDEX
View File

@ -84,9 +84,6 @@ policy-routing.txt
- IP policy-based routing
ray_cs.txt
- Raylink Wireless LAN card driver info.
sk98lin.txt
- Marvell Yukon Chipset / SysKonnect SK-98xx compliant Gigabit
Ethernet Adapter family driver info
skfp.txt
- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
smc9.txt

568
Documentation/networking/sk98lin.txt
View File

@ -1,568 +0,0 @@
(C)Copyright 1999-2004 Marvell(R).
All rights reserved
===========================================================================
sk98lin.txt created 13-Feb-2004
Readme File for sk98lin v6.23
Marvell Yukon/SysKonnect SK-98xx Gigabit Ethernet Adapter family driver for LINUX
This file contains
1 Overview
2 Required Files
3 Installation
3.1 Driver Installation
3.2 Inclusion of adapter at system start
4 Driver Parameters
4.1 Per-Port Parameters
4.2 Adapter Parameters
5 Large Frame Support
6 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad)
7 Troubleshooting
===========================================================================
1 Overview
===========
The sk98lin driver supports the Marvell Yukon and SysKonnect
SK-98xx/SK-95xx compliant Gigabit Ethernet Adapter on Linux. It has
been tested with Linux on Intel/x86 machines.
***
2 Required Files
=================
The linux kernel source.
No additional files required.
***
3 Installation
===============
It is recommended to download the latest version of the driver from the
SysKonnect web site www.syskonnect.com. If you have downloaded the latest
driver, the Linux kernel has to be patched before the driver can be
installed. For details on how to patch a Linux kernel, refer to the
patch.txt file.
3.1 Driver Installation
------------------------
The following steps describe the actions that are required to install
the driver and to start it manually. These steps should be carried
out for the initial driver setup. Once confirmed to be ok, they can
be included in the system start.
NOTE 1: To perform the following tasks you need 'root' access.
NOTE 2: In case of problems, please read the section "Troubleshooting"
below.
The driver can either be integrated into the kernel or it can be compiled
as a module. Select the appropriate option during the kernel
configuration.
Compile/use the driver as a module
----------------------------------
To compile the driver, go to the directory /usr/src/linux and
execute the command "make menuconfig" or "make xconfig" and proceed as
follows:
To integrate the driver permanently into the kernel, proceed as follows:
1. Select the menu "Network device support" and then "Ethernet(1000Mbit)"
2. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support"
with (*)
3. Build a new kernel when the configuration of the above options is
finished.
4. Install the new kernel.
5. Reboot your system.
To use the driver as a module, proceed as follows:
1. Enable 'loadable module support' in the kernel.
2. For automatic driver start, enable the 'Kernel module loader'.
3. Select the menu "Network device support" and then "Ethernet(1000Mbit)"
4. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support"
with (M)
5. Execute the command "make modules".
6. Execute the command "make modules_install".
The appropriate modules will be installed.
7. Reboot your system.
Load the module manually
------------------------
To load the module manually, proceed as follows:
1. Enter "modprobe sk98lin".
2. If a Marvell Yukon or SysKonnect SK-98xx adapter is installed in
your computer and you have a /proc file system, execute the command:
"ls /proc/net/sk98lin/"
This should produce an output containing a line with the following
format:
eth0 eth1 ...
which indicates that your adapter has been found and initialized.
NOTE 1: If you have more than one Marvell Yukon or SysKonnect SK-98xx
adapter installed, the adapters will be listed as 'eth0',
'eth1', 'eth2', etc.
For each adapter, repeat steps 3 and 4 below.
NOTE 2: If you have other Ethernet adapters installed, your Marvell
Yukon or SysKonnect SK-98xx adapter will be mapped to the
next available number, e.g. 'eth1'. The mapping is executed
automatically.
The module installation message (displayed either in a system
log file or on the console) prints a line for each adapter
found containing the corresponding 'ethX'.
3. Select an IP address and assign it to the respective adapter by
entering:
ifconfig eth0 <ip-address>
With this command, the adapter is connected to the Ethernet.
SK-98xx Gigabit Ethernet Server Adapters: The yellow LED on the adapter
is now active, the link status LED of the primary port is active and
the link status LED of the secondary port (on dual port adapters) is
blinking (if the ports are connected to a switch or hub).
SK-98xx V2.0 Gigabit Ethernet Adapters: The link status LED is active.
In addition, you will receive a status message on the console stating
"ethX: network connection up using port Y" and showing the selected
connection parameters (x stands for the ethernet device number
(0,1,2, etc), y stands for the port name (A or B)).
NOTE: If you are in doubt about IP addresses, ask your network
administrator for assistance.
4. Your adapter should now be fully operational.
Use 'ping <otherstation>' to verify the connection to other computers
on your network.
5. To check the adapter configuration view /proc/net/sk98lin/[devicename].
For example by executing:
"cat /proc/net/sk98lin/eth0"
Unload the module
-----------------
To stop and unload the driver modules, proceed as follows:
1. Execute the command "ifconfig eth0 down".
2. Execute the command "rmmod sk98lin".
3.2 Inclusion of adapter at system start
-----------------------------------------
Since a large number of different Linux distributions are
available, we are unable to describe a general installation procedure
for the driver module.
Because the driver is now integrated in the kernel, installation should
be easy, using the standard mechanism of your distribution.
Refer to the distribution's manual for installation of ethernet adapters.
***
4 Driver Parameters
====================
Parameters can be set at the command line after the module has been
loaded with the command 'modprobe'.
In some distributions, the configuration tools are able to pass parameters
to the driver module.
If you use the kernel module loader, you can set driver parameters
in the file /etc/modprobe.conf (or /etc/modules.conf in 2.4 or earlier).
To set the driver parameters in this file, proceed as follows:
1. Insert a line of the form :
options sk98lin ...
For "...", the same syntax is required as described for the command
line parameters of modprobe below.
2. To activate the new parameters, either reboot your computer
or
unload and reload the driver.
The syntax of the driver parameters is:
modprobe sk98lin parameter=value1[,value2[,value3...]]
where value1 refers to the first adapter, value2 to the second etc.
NOTE: All parameters are case sensitive. Write them exactly as shown
below.
Example:
Suppose you have two adapters. You want to set auto-negotiation
on the first adapter to ON and on the second adapter to OFF.
You also want to set DuplexCapabilities on the first adapter
to FULL, and on the second adapter to HALF.
Then, you must enter:
modprobe sk98lin AutoNeg_A=On,Off DupCap_A=Full,Half
NOTE: The number of adapters that can be configured this way is
limited in the driver (file skge.c, constant SK_MAX_CARD_PARAM).
The current limit is 16. If you happen to install
more adapters, adjust this and recompile.
4.1 Per-Port Parameters
------------------------
These settings are available for each port on the adapter.
In the following description, '?' stands for the port for
which you set the parameter (A or B).
Speed
-----
Parameter: Speed_?
Values: 10, 100, 1000, Auto
Default: Auto
This parameter is used to set the speed capabilities. It is only valid
for the SK-98xx V2.0 copper adapters.
Usually, the speed is negotiated between the two ports during link
establishment. If this fails, a port can be forced to a specific setting
with this parameter.
Auto-Negotiation
----------------
Parameter: AutoNeg_?
Values: On, Off, Sense
Default: On
The "Sense"-mode automatically detects whether the link partner supports
auto-negotiation or not.
Duplex Capabilities
-------------------
Parameter: DupCap_?
Values: Half, Full, Both
Default: Both
This parameters is only relevant if auto-negotiation for this port is
not set to "Sense". If auto-negotiation is set to "On", all three values
are possible. If it is set to "Off", only "Full" and "Half" are allowed.
This parameter is useful if your link partner does not support all
possible combinations.
Flow Control
------------
Parameter: FlowCtrl_?
Values: Sym, SymOrRem, LocSend, None
Default: SymOrRem
This parameter can be used to set the flow control capabilities the
port reports during auto-negotiation. It can be set for each port
individually.
Possible modes:
-- Sym = Symmetric: both link partners are allowed to send
PAUSE frames
-- SymOrRem = SymmetricOrRemote: both or only remote partner
are allowed to send PAUSE frames
-- LocSend = LocalSend: only local link partner is allowed
to send PAUSE frames
-- None = no link partner is allowed to send PAUSE frames
NOTE: This parameter is ignored if auto-negotiation is set to "Off".
Role in Master-Slave-Negotiation (1000Base-T only)
--------------------------------------------------
Parameter: Role_?
Values: Auto, Master, Slave
Default: Auto
This parameter is only valid for the SK-9821 and SK-9822 adapters.
For two 1000Base-T ports to communicate, one must take the role of the
master (providing timing information), while the other must be the
slave. Usually, this is negotiated between the two ports during link
establishment. If this fails, a port can be forced to a specific setting
with this parameter.
4.2 Adapter Parameters
-----------------------
Connection Type (SK-98xx V2.0 copper adapters only)
---------------
Parameter: ConType
Values: Auto, 100FD, 100HD, 10FD, 10HD
Default: Auto
The parameter 'ConType' is a combination of all five per-port parameters
within one single parameter. This simplifies the configuration of both ports
of an adapter card! The different values of this variable reflect the most
meaningful combinations of port parameters.
The following table shows the values of 'ConType' and the corresponding
combinations of the per-port parameters:
ConType | DupCap AutoNeg FlowCtrl Role Speed
----------+------------------------------------------------------
Auto | Both On SymOrRem Auto Auto
100FD | Full Off None Auto (ignored) 100
100HD | Half Off None Auto (ignored) 100
10FD | Full Off None Auto (ignored) 10
10HD | Half Off None Auto (ignored) 10
Stating any other port parameter together with this 'ConType' variable
will result in a merged configuration of those settings. This due to
the fact, that the per-port parameters (e.g. Speed_? ) have a higher
priority than the combined variable 'ConType'.
NOTE: This parameter is always used on both ports of the adapter card.
Interrupt Moderation
--------------------
Parameter: Moderation
Values: None, Static, Dynamic
Default: None
Interrupt moderation is employed to limit the maximum number of interrupts
the driver has to serve. That is, one or more interrupts (which indicate any
transmit or receive packet to be processed) are queued until the driver
processes them. When queued interrupts are to be served, is determined by the
'IntsPerSec' parameter, which is explained later below.
Possible modes:
-- None - No interrupt moderation is applied on the adapter card.
Therefore, each transmit or receive interrupt is served immediately
as soon as it appears on the interrupt line of the adapter card.
-- Static - Interrupt moderation is applied on the adapter card.
All transmit and receive interrupts are queued until a complete
moderation interval ends. If such a moderation interval ends, all
queued interrupts are processed in one big bunch without any delay.
The term 'static' reflects the fact, that interrupt moderation is
always enabled, regardless how much network load is currently
passing via a particular interface. In addition, the duration of
the moderation interval has a fixed length that never changes while
the driver is operational.
-- Dynamic - Interrupt moderation might be applied on the adapter card,
depending on the load of the system. If the driver detects that the
system load is too high, the driver tries to shield the system against
too much network load by enabling interrupt moderation. If - at a later
time - the CPU utilization decreases again (or if the network load is
negligible) the interrupt moderation will automatically be disabled.
Interrupt moderation should be used when the driver has to handle one or more
interfaces with a high network load, which - as a consequence - leads also to a
high CPU utilization. When moderation is applied in such high network load
situations, CPU load might be reduced by 20-30%.
NOTE: The drawback of using interrupt moderation is an increase of the round-
trip-time (RTT), due to the queueing and serving of interrupts at dedicated
moderation times.
Interrupts per second
---------------------
Parameter: IntsPerSec
Values: 30...40000 (interrupts per second)
Default: 2000
This parameter is only used if either static or dynamic interrupt moderation
is used on a network adapter card. Using this parameter if no moderation is
applied will lead to no action performed.
This parameter determines the length of any interrupt moderation interval.
Assuming that static interrupt moderation is to be used, an 'IntsPerSec'
parameter value of 2000 will lead to an interrupt moderation interval of
500 microseconds.
NOTE: The duration of the moderation interval is to be chosen with care.
At first glance, selecting a very long duration (e.g. only 100 interrupts per
second) seems to be meaningful, but the increase of packet-processing delay
is tremendous. On the other hand, selecting a very short moderation time might
compensate the use of any moderation being applied.
Preferred Port
--------------
Parameter: PrefPort
Values: A, B
Default: A
This is used to force the preferred port to A or B (on dual-port network
adapters). The preferred port is the one that is used if both are detected
as fully functional.
RLMT Mode (Redundant Link Management Technology)
------------------------------------------------
Parameter: RlmtMode
Values: CheckLinkState,CheckLocalPort, CheckSeg, DualNet
Default: CheckLinkState
RLMT monitors the status of the port. If the link of the active port
fails, RLMT switches immediately to the standby link. The virtual link is
maintained as long as at least one 'physical' link is up.
Possible modes:
-- CheckLinkState - Check link state only: RLMT uses the link state
reported by the adapter hardware for each individual port to
determine whether a port can be used for all network traffic or
not.
-- CheckLocalPort - In this mode, RLMT monitors the network path
between the two ports of an adapter by regularly exchanging packets
between them. This mode requires a network configuration in which
the two ports are able to "see" each other (i.e. there must not be
any router between the ports).
-- CheckSeg - Check local port and segmentation: This mode supports the
same functions as the CheckLocalPort mode and additionally checks
network segmentation between the ports. Therefore, this mode is only
to be used if Gigabit Ethernet switches are installed on the network
that have been configured to use the Spanning Tree protocol.
-- DualNet - In this mode, ports A and B are used as separate devices.
If you have a dual port adapter, port A will be configured as eth0
and port B as eth1. Both ports can be used independently with
distinct IP addresses. The preferred port setting is not used.
RLMT is turned off.
NOTE: RLMT modes CLP and CLPSS are designed to operate in configurations
where a network path between the ports on one adapter exists.
Moreover, they are not designed to work where adapters are connected
back-to-back.
***
5 Large Frame Support
======================
The driver supports large frames (also called jumbo frames). Using large
frames can result in an improved throughput if transferring large amounts
of data.
To enable large frames, set the MTU (maximum transfer unit) of the
interface to the desired value (up to 9000), execute the following
command:
ifconfig eth0 mtu 9000
This will only work if you have two adapters connected back-to-back
or if you use a switch that supports large frames. When using a switch,
it should be configured to allow large frames and auto-negotiation should
be set to OFF. The setting must be configured on all adapters that can be
reached by the large frames. If one adapter is not set to receive large
frames, it will simply drop them.
You can switch back to the standard ethernet frame size by executing the
following command:
ifconfig eth0 mtu 1500
To permanently configure this setting, add a script with the 'ifconfig'
line to the system startup sequence (named something like "S99sk98lin"
in /etc/rc.d/rc2.d).
***
6 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad)
==================================================================
The Marvell Yukon/SysKonnect Linux drivers are able to support VLAN and
Link Aggregation according to IEEE standards 802.1, 802.1q, and 802.3ad.
These features are only available after installation of open source
modules available on the Internet:
For VLAN go to: http://www.candelatech.com/~greear/vlan.html
For Link Aggregation go to: http://www.st.rim.or.jp/~yumo
NOTE: SysKonnect GmbH does not offer any support for these open source
modules and does not take the responsibility for any kind of
failures or problems arising in connection with these modules.
NOTE: Configuring Link Aggregation on a SysKonnect dual link adapter may
cause problems when unloading the driver.
7 Troubleshooting
==================
If any problems occur during the installation process, check the
following list:
Problem: The SK-98xx adapter cannot be found by the driver.
Solution: In /proc/pci search for the following entry:
'Ethernet controller: SysKonnect SK-98xx ...'
If this entry exists, the SK-98xx or SK-98xx V2.0 adapter has
been found by the system and should be operational.
If this entry does not exist or if the file '/proc/pci' is not
found, there may be a hardware problem or the PCI support may
not be enabled in your kernel.
The adapter can be checked using the diagnostics program which
is available on the SysKonnect web site:
www.syskonnect.com
Some COMPAQ machines have problems dealing with PCI under Linux.
This problem is described in the 'PCI howto' document
(included in some distributions or available from the
web, e.g. at 'www.linux.org').
Problem: Programs such as 'ifconfig' or 'route' cannot be found or the
error message 'Operation not permitted' is displayed.
Reason: You are not logged in as user 'root'.
Solution: Logout and login as 'root' or change to 'root' via 'su'.
Problem: Upon use of the command 'ping <address>' the message
"ping: sendto: Network is unreachable" is displayed.
Reason: Your route is not set correctly.
Solution: If you are using RedHat, you probably forgot to set up the
route in the 'network configuration'.
Check the existing routes with the 'route' command and check
if an entry for 'eth0' exists, and if so, if it is set correctly.
Problem: The driver can be started, the adapter is connected to the
network, but you cannot receive or transmit any packets;
e.g. 'ping' does not work.
Reason: There is an incorrect route in your routing table.
Solution: Check the routing table with the command 'route' and read the
manual help pages dealing with routes (enter 'man route').
NOTE: Although the 2.2.x kernel versions generate the routing entry
automatically, problems of this kind may occur here as well. We've
come across a situation in which the driver started correctly at
system start, but after the driver has been removed and reloaded,
the route of the adapter's network pointed to the 'dummy0'device
and had to be corrected manually.
Problem: Your computer should act as a router between multiple
IP subnetworks (using multiple adapters), but computers in
other subnetworks cannot be reached.
Reason: Either the router's kernel is not configured for IP forwarding
or the routing table and gateway configuration of at least one
computer is not working.
Problem: Upon driver start, the following error message is displayed:
"eth0: -- ERROR --
Class: internal Software error
Nr: 0xcc
Msg: SkGeInitPort() cannot init running ports"
Reason: You are using a driver compiled for single processor machines
on a multiprocessor machine with SMP (Symmetric MultiProcessor)
kernel.
Solution: Configure your kernel appropriately and recompile the kernel or
the modules.
If your problem is not listed here, please contact SysKonnect's technical
support for help (linux@syskonnect.de).
When contacting our technical support, please ensure that the following
information is available:
- System Manufacturer and HW Informations (CPU, Memory... )
- PCI-Boards in your system
- Distribution
- Kernel version
- Driver version
***
***End of Readme File***

1
drivers/atm/firestream.c
View File

@ -978,6 +978,7 @@ static int fs_open(struct atm_vcc *atm_vcc)
/* Docs are vague about this atm_hdr field. By the way, the FS
* chip makes odd errors if lower bits are set.... -- REW */
tc->atm_hdr = (vpi << 20) | (vci << 4);
tmc0 = 0;
{
int pcr = atm_pcr_goal (txtp);

3
drivers/atm/he.c
View File

@ -3000,8 +3000,7 @@ he_proc_read(struct atm_dev *dev, loff_t *pos, char *page)
/* eeprom routines -- see 4.7 */
u8
read_prom_byte(struct he_dev *he_dev, int addr)
static u8 read_prom_byte(struct he_dev *he_dev, int addr)
{
u32 val = 0, tmp_read = 0;
int i, j = 0;

6
drivers/atm/idt77252.c
View File

@ -2016,8 +2016,7 @@ idt77252_send_skb(struct atm_vcc *vcc, struct sk_buff *skb, int oam)
return 0;
}
int
idt77252_send(struct atm_vcc *vcc, struct sk_buff *skb)
static int idt77252_send(struct atm_vcc *vcc, struct sk_buff *skb)
{
return idt77252_send_skb(vcc, skb, 0);
}
@ -3072,8 +3071,7 @@ idt77252_dev_open(struct idt77252_dev *card)
return 0;
}
void
idt77252_dev_close(struct atm_dev *dev)
static void idt77252_dev_close(struct atm_dev *dev)
{
struct idt77252_dev *card = dev->dev_data;
u32 conf;

2
drivers/atm/iphase.c
View File

@ -958,6 +958,7 @@ static void ia_suni_pm7345_init (IADEV *iadev)
/***************************** IA_LIB END *****************************/
#ifdef CONFIG_ATM_IA_DEBUG
static int tcnter = 0;
static void xdump( u_char* cp, int length, char* prefix )
{
@ -992,6 +993,7 @@ static void xdump( u_char* cp, int length, char* prefix )
}
} /* close xdump(... */
#endif /* CONFIG_ATM_IA_DEBUG */
static struct atm_dev *ia_boards = NULL;

2
drivers/net/Kconfig
View File

@ -2635,7 +2635,7 @@ config NIU
config PASEMI_MAC
tristate "PA Semi 1/10Gbit MAC"
depends on PPC64 && PCI
depends on PPC_PASEMI && PCI
select PHYLIB
select INET_LRO
help

2
drivers/net/bfin_mac.c
View File

@ -575,7 +575,6 @@ static void adjust_tx_list(void)
static int bf537mac_hard_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
struct bf537mac_local *lp = netdev_priv(dev);
unsigned int data;
current_tx_ptr->skb = skb;
@ -634,7 +633,6 @@ static int bf537mac_hard_start_xmit(struct sk_buff *skb,
static void bf537mac_rx(struct net_device *dev)
{
struct sk_buff *skb, *new_skb;
struct bf537mac_local *lp = netdev_priv(dev);
unsigned short len;
/* allocate a new skb for next time receive */

1
drivers/net/bonding/bond_sysfs.c
View File

@ -341,6 +341,7 @@ static ssize_t bonding_store_slaves(struct device *d,
if (command[0] == '-') {
dev = NULL;
original_mtu = 0;
bond_for_each_slave(bond, slave, i)
if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0) {
dev = slave->dev;

18
drivers/net/forcedeth.c
View File

@ -1854,6 +1854,7 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
struct ring_desc* start_tx;
struct ring_desc* prev_tx;
struct nv_skb_map* prev_tx_ctx;
unsigned long flags;
/* add fragments to entries count */
for (i = 0; i < fragments; i++) {
@ -1863,10 +1864,10 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
empty_slots = nv_get_empty_tx_slots(np);
if (unlikely(empty_slots <= entries)) {
spin_lock_irq(&np->lock);
spin_lock_irqsave(&np->lock, flags);
netif_stop_queue(dev);
np->tx_stop = 1;
spin_unlock_irq(&np->lock);
spin_unlock_irqrestore(&np->lock, flags);
return NETDEV_TX_BUSY;
}
@ -1929,13 +1930,13 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
tx_flags_extra = skb->ip_summed == CHECKSUM_PARTIAL ?
NV_TX2_CHECKSUM_L3 | NV_TX2_CHECKSUM_L4 : 0;
spin_lock_irq(&np->lock);
spin_lock_irqsave(&np->lock, flags);
/* set tx flags */
start_tx->flaglen |= cpu_to_le32(tx_flags | tx_flags_extra);
np->put_tx.orig = put_tx;
spin_unlock_irq(&np->lock);
spin_unlock_irqrestore(&np->lock, flags);
dprintk(KERN_DEBUG "%s: nv_start_xmit: entries %d queued for transmission. tx_flags_extra: %x\n",
dev->name, entries, tx_flags_extra);
@ -1971,6 +1972,7 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev)
struct ring_desc_ex* prev_tx;
struct nv_skb_map* prev_tx_ctx;
struct nv_skb_map* start_tx_ctx;
unsigned long flags;
/* add fragments to entries count */
for (i = 0; i < fragments; i++) {
@ -1980,10 +1982,10 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev)
empty_slots = nv_get_empty_tx_slots(np);
if (unlikely(empty_slots <= entries)) {
spin_lock_irq(&np->lock);
spin_lock_irqsave(&np->lock, flags);
netif_stop_queue(dev);
np->tx_stop = 1;
spin_unlock_irq(&np->lock);
spin_unlock_irqrestore(&np->lock, flags);
return NETDEV_TX_BUSY;
}
@ -2059,7 +2061,7 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev)
start_tx->txvlan = 0;
}
spin_lock_irq(&np->lock);
spin_lock_irqsave(&np->lock, flags);
if (np->tx_limit) {
/* Limit the number of outstanding tx. Setup all fragments, but
@ -2085,7 +2087,7 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev)
start_tx->flaglen |= cpu_to_le32(tx_flags | tx_flags_extra);
np->put_tx.ex = put_tx;
spin_unlock_irq(&np->lock);
spin_unlock_irqrestore(&np->lock, flags);
dprintk(KERN_DEBUG "%s: nv_start_xmit_optimized: entries %d queued for transmission. tx_flags_extra: %x\n",
dev->name, entries, tx_flags_extra);

4
drivers/net/ibm_newemac/core.c
View File

@ -1242,8 +1242,8 @@ static int emac_close(struct net_device *ndev)
static inline u16 emac_tx_csum(struct emac_instance *dev,
struct sk_buff *skb)
{
if (emac_has_feature(dev, EMAC_FTR_HAS_TAH &&
skb->ip_summed == CHECKSUM_PARTIAL)) {
if (emac_has_feature(dev, EMAC_FTR_HAS_TAH) &&
(skb->ip_summed == CHECKSUM_PARTIAL)) {
++dev->stats.tx_packets_csum;
return EMAC_TX_CTRL_TAH_CSUM;
}

2
drivers/net/s2io.c
View File

@ -84,7 +84,7 @@
#include "s2io.h"
#include "s2io-regs.h"
#define DRV_VERSION "2.0.26.15-2"
#define DRV_VERSION "2.0.26.20"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";

6
drivers/net/tulip/eeprom.c
View File

@ -343,6 +343,12 @@ int __devinit tulip_read_eeprom(struct net_device *dev, int location, int addr_l
void __iomem *ee_addr = tp->base_addr + CSR9;
int read_cmd = location | (EE_READ_CMD << addr_len);
/* If location is past the end of what we can address, don't
* read some other location (ie truncate). Just return zero.
*/
if (location > (1 << addr_len) - 1)
return 0;
iowrite32(EE_ENB & ~EE_CS, ee_addr);
iowrite32(EE_ENB, ee_addr);

7
drivers/net/tulip/tulip_core.c
View File

@ -1437,6 +1437,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
EEPROM.
*/
ee_data = tp->eeprom;
memset(ee_data, 0, sizeof(tp->eeprom));
sum = 0;
if (chip_idx == LC82C168) {
for (i = 0; i < 3; i++) {
@ -1458,8 +1459,12 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
/* A serial EEPROM interface, we read now and sort it out later. */
int sa_offset = 0;
int ee_addr_size = tulip_read_eeprom(dev, 0xff, 8) & 0x40000 ? 8 : 6;
int ee_max_addr = ((1 << ee_addr_size) - 1) * sizeof(u16);
for (i = 0; i < sizeof(tp->eeprom); i+=2) {
if (ee_max_addr > sizeof(tp->eeprom))
ee_max_addr = sizeof(tp->eeprom);
for (i = 0; i < ee_max_addr ; i += sizeof(u16)) {
u16 data = tulip_read_eeprom(dev, i/2, ee_addr_size);
ee_data[i] = data & 0xff;
ee_data[i + 1] = data >> 8;

2
drivers/net/usb/Kconfig
View File

@ -129,7 +129,7 @@ config USB_USBNET
config USB_NET_AX8817X
tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
depends on USB_USBNET && NET_ETHERNET
depends on USB_USBNET
select CRC32
default y
help

2
drivers/net/usb/dm9601.c
View File

@ -354,7 +354,7 @@ static void dm9601_set_multicast(struct net_device *net)
struct dev_mc_list *mc_list = net->mc_list;
int i;
for (i = 0; i < net->mc_count; i++) {
for (i = 0; i < net->mc_count; i++, mc_list = mc_list->next) {
u32 crc = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26;
hashes[crc >> 3] |= 1 << (crc & 0x7);
}

4
drivers/net/usb/pegasus.c
View File

@ -1128,12 +1128,8 @@ pegasus_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
pegasus_t *pegasus;
if (in_atomic())
return 0;
pegasus = netdev_priv(dev);
mii_ethtool_gset(&pegasus->mii, ecmd);
return 0;
}

2
drivers/net/wan/lapbether.c
View File

@ -58,7 +58,7 @@ struct lapbethdev {
struct net_device_stats stats; /* some statistics */
};
static struct list_head lapbeth_devices = LIST_HEAD_INIT(lapbeth_devices);
static LIST_HEAD(lapbeth_devices);
/* ------------------------------------------------------------------------ */

7
drivers/net/wireless/b43/dma.c
View File

@ -619,6 +619,7 @@ static int setup_rx_descbuffer(struct b43_dmaring *ring,
}
if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) {
b43err(ring->dev->wl, "RX DMA buffer allocation failed\n");
dev_kfree_skb_any(skb);
return -EIO;
}
@ -874,8 +875,12 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev,
DMA_TO_DEVICE);
if (b43_dma_mapping_error(ring, dma_test,
b43_txhdr_size(dev), 1))
b43_txhdr_size(dev), 1)) {
b43err(dev->wl,
"TXHDR DMA allocation failed\n");
goto err_kfree_txhdr_cache;
}
}
dma_unmap_single(dev->dev->dev,

6
drivers/net/wireless/b43/pcmcia.c
View File

@ -91,6 +91,8 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
dev->conf.ConfigBase = parse.config.base;
dev->conf.Present = parse.config.rmask[0];
dev->conf.Attributes = CONF_ENABLE_IRQ;
dev->conf.IntType = INT_MEMORY_AND_IO;
dev->io.BasePort2 = 0;
dev->io.NumPorts2 = 0;
@ -112,8 +114,8 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
if (res != CS_SUCCESS)
goto err_disable;
dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_FIRST_SHARED;
dev->irq.IRQInfo1 = IRQ_LEVEL_ID | IRQ_SHARE_ID;
dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
dev->irq.Handler = NULL; /* The handler is registered later. */
dev->irq.Instance = NULL;
res = pcmcia_request_irq(dev, &dev->irq);

2
drivers/net/wireless/iwlwifi/iwl-4965.c
View File

@ -4589,7 +4589,7 @@ static u8 iwl4965_is_fat_tx_allowed(struct iwl4965_priv *priv,
if (sta_ht_inf) {
if ((!sta_ht_inf->ht_supported) ||
(!sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH))
(!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH)))
return 0;
}

2
drivers/net/wireless/libertas/if_cs.c
View File

@ -677,9 +677,7 @@ static int if_cs_get_int_status(struct lbs_private *priv, u8 *ireg)
/* Card has a command result for us */
if (*ireg & IF_CS_C_S_CMD_UPLD_RDY) {
spin_lock(&priv->driver_lock);
ret = if_cs_receive_cmdres(priv, priv->upld_buf, &priv->upld_len);
spin_unlock(&priv->driver_lock);
if (ret < 0)
lbs_pr_err("could not receive cmd from card\n");
}

13
drivers/net/wireless/rt2x00/rt2x00dev.c
View File

@ -1393,11 +1393,20 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
exit:
/*
* Set device mode to sleep for power management.
* Set device mode to sleep for power management,
* on some hardware this call seems to consistently fail.
* From the specifications it is hard to tell why it fails,
* and if this is a "bad thing".
* Overall it is safe to just ignore the failure and
* continue suspending. The only downside is that the
* device will not be in optimal power save mode, but with
* the radio and the other components already disabled the
* device is as good as disabled.
*/
retval = rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP);
if (retval)
return retval;
WARNING(rt2x00dev, "Device failed to enter sleep state, "
"continue suspending.\n");
return 0;
}

12
include/linux/netdevice.h
View File

@ -383,9 +383,11 @@ static inline void __napi_complete(struct napi_struct *n)
static inline void napi_complete(struct napi_struct *n)
{
local_irq_disable();
unsigned long flags;
local_irq_save(flags);
__napi_complete(n);
local_irq_enable();
local_irq_restore(flags);
}
/**
@ -1072,12 +1074,14 @@ static inline int netif_is_multiqueue(const struct net_device *dev)
}
/* Use this variant when it is known for sure that it
* is executing from interrupt context.
* is executing from hardware interrupt context or with hardware interrupts
* disabled.
*/
extern void dev_kfree_skb_irq(struct sk_buff *skb);
/* Use this variant in places where it could be invoked
* either from interrupt or non-interrupt context.
* from either hardware interrupt or other context, with hardware interrupts
* either disabled or enabled.
*/
extern void dev_kfree_skb_any(struct sk_buff *skb);

1
include/net/llc.h
View File

@ -65,7 +65,6 @@ struct llc_sap {
extern struct list_head llc_sap_list;
extern rwlock_t llc_sap_list_lock;
extern unsigned char llc_station_mac_sa[ETH_ALEN];
extern int llc_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev);

4
include/net/llc_pdu.h
View File

@ -381,7 +381,7 @@ static inline void llc_pdu_init_as_xid_cmd(struct sk_buff *skb,
xid_info->fmt_id = LLC_XID_FMT_ID; /* 0x81 */
xid_info->type = svcs_supported;
xid_info->rw = rx_window << 1; /* size of receive window */
skb_put(skb, 3);
skb_put(skb, sizeof(struct llc_xid_info));
}
/**
@ -406,7 +406,7 @@ static inline void llc_pdu_init_as_xid_rsp(struct sk_buff *skb,
xid_info->fmt_id = LLC_XID_FMT_ID;
xid_info->type = svcs_supported;
xid_info->rw = rx_window << 1;
skb_put(skb, 3);
skb_put(skb, sizeof(struct llc_xid_info));
}
/* LLC Type 2 FRMR response information field format */

7
include/net/llc_sap.h
View File

@ -1,5 +1,8 @@
#ifndef LLC_SAP_H
#define LLC_SAP_H
#include <asm/types.h>
/*
* Copyright (c) 1997 by Procom Technology,Inc.
* 2001-2003 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
@ -19,8 +22,8 @@ struct sock;
extern void llc_sap_rtn_pdu(struct llc_sap *sap, struct sk_buff *skb);
extern void llc_save_primitive(struct sock *sk, struct sk_buff* skb,
unsigned char prim);
extern struct sk_buff *llc_alloc_frame(struct sock *sk,
struct net_device *dev);
extern struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev,
u8 type, u32 data_size);
extern void llc_build_and_send_test_pkt(struct llc_sap *sap,
struct sk_buff *skb,

20
net/8021q/vlan.c
View File

@ -374,17 +374,35 @@ static void vlan_sync_address(struct net_device *dev,
memcpy(vlan->real_dev_addr, dev->dev_addr, ETH_ALEN);
}
static void __vlan_device_event(struct net_device *dev, unsigned long event)
{
switch (event) {
case NETDEV_CHANGENAME:
vlan_proc_rem_dev(dev);
if (vlan_proc_add_dev(dev) < 0)
pr_warning("8021q: failed to change proc name for %s\n",
dev->name);
break;
}
}
static int vlan_device_event(struct notifier_block *unused, unsigned long event,
void *ptr)
{
struct net_device *dev = ptr;
struct vlan_group *grp = __vlan_find_group(dev->ifindex);
struct vlan_group *grp;
int i, flgs;
struct net_device *vlandev;
if (dev->nd_net != &init_net)
return NOTIFY_DONE;
if (is_vlan_dev(dev)) {
__vlan_device_event(dev, event);
goto out;
}
grp = __vlan_find_group(dev->ifindex);
if (!grp)
goto out;

5
net/8021q/vlan.h
View File

@ -45,4 +45,9 @@ void vlan_netlink_fini(void);
extern struct rtnl_link_ops vlan_link_ops;
static inline int is_vlan_dev(struct net_device *dev)
{
return dev->priv_flags & IFF_802_1Q_VLAN;
}
#endif /* !(__BEN_VLAN_802_1Q_INC__) */

5
net/8021q/vlanproc.c
View File

@ -210,11 +210,6 @@ int vlan_proc_rem_dev(struct net_device *vlandev)
* The following few functions build the content of /proc/net/vlan/config
*/
static inline int is_vlan_dev(struct net_device *dev)
{
return dev->priv_flags & IFF_802_1Q_VLAN;
}
/* start read of /proc/net/vlan/config */
static void *vlan_seq_start(struct seq_file *seq, loff_t *pos)
__acquires(dev_base_lock)

40
net/bluetooth/af_bluetooth.c
View File

@ -53,6 +53,30 @@
/* Bluetooth sockets */
#define BT_MAX_PROTO 8
static struct net_proto_family *bt_proto[BT_MAX_PROTO];
static struct lock_class_key bt_slock_key[BT_MAX_PROTO];
static struct lock_class_key bt_lock_key[BT_MAX_PROTO];
static const char *bt_key_strings[BT_MAX_PROTO] = {
"sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP",
"sk_lock-AF_BLUETOOTH-BTPROTO_HCI",
"sk_lock-AF_BLUETOOTH-BTPROTO_SCO",
"sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM",
"sk_lock-AF_BLUETOOTH-BTPROTO_BNEP",
"sk_lock-AF_BLUETOOTH-BTPROTO_CMTP",
"sk_lock-AF_BLUETOOTH-BTPROTO_HIDP",
"sk_lock-AF_BLUETOOTH-BTPROTO_AVDTP",
};
static const char *bt_slock_key_strings[BT_MAX_PROTO] = {
"slock-AF_BLUETOOTH-BTPROTO_L2CAP",
"slock-AF_BLUETOOTH-BTPROTO_HCI",
"slock-AF_BLUETOOTH-BTPROTO_SCO",
"slock-AF_BLUETOOTH-BTPROTO_RFCOMM",
"slock-AF_BLUETOOTH-BTPROTO_BNEP",
"slock-AF_BLUETOOTH-BTPROTO_CMTP",
"slock-AF_BLUETOOTH-BTPROTO_HIDP",
"slock-AF_BLUETOOTH-BTPROTO_AVDTP",
};
static DEFINE_RWLOCK(bt_proto_lock);
int bt_sock_register(int proto, struct net_proto_family *ops)
@ -95,6 +119,21 @@ int bt_sock_unregister(int proto)
}
EXPORT_SYMBOL(bt_sock_unregister);
static void bt_reclassify_sock_lock(struct socket *sock, int proto)
{
struct sock *sk = sock->sk;
if (!sk)
return;
BUG_ON(sock_owned_by_user(sk));
sock_lock_init_class_and_name(sk,
bt_slock_key_strings[proto],
&bt_slock_key[proto],
bt_key_strings[proto],
&bt_lock_key[proto]);
}
static int bt_sock_create(struct net *net, struct socket *sock, int proto)
{
int err;
@ -117,6 +156,7 @@ static int bt_sock_create(struct net *net, struct socket *sock, int proto)
if (bt_proto[proto] && try_module_get(bt_proto[proto]->owner)) {
err = bt_proto[proto]->create(net, sock, proto);
bt_reclassify_sock_lock(sock, proto);
module_put(bt_proto[proto]->owner);
}

2
net/bluetooth/hci_sock.c
View File

@ -84,7 +84,7 @@ static struct hci_sec_filter hci_sec_filter = {
};
static struct bt_sock_list hci_sk_list = {
.lock = RW_LOCK_UNLOCKED
.lock = __RW_LOCK_UNLOCKED(hci_sk_list.lock)
};
/* Send frame to RAW socket */

2
net/bluetooth/l2cap.c
View File

@ -62,7 +62,7 @@ static u32 l2cap_feat_mask = 0x0000;
static const struct proto_ops l2cap_sock_ops;
static struct bt_sock_list l2cap_sk_list = {
.lock = RW_LOCK_UNLOCKED
.lock = __RW_LOCK_UNLOCKED(l2cap_sk_list.lock)
};
static void __l2cap_sock_close(struct sock *sk, int reason);

2
net/bluetooth/rfcomm/core.c
View File

@ -423,8 +423,8 @@ static int __rfcomm_dlc_close(struct rfcomm_dlc *d, int err)
rfcomm_dlc_lock(d);
d->state = BT_CLOSED;
d->state_change(d, err);
rfcomm_dlc_unlock(d);
d->state_change(d, err);
skb_queue_purge(&d->tx_queue);
rfcomm_dlc_unlink(d);

2
net/bluetooth/rfcomm/sock.c
View File

@ -60,7 +60,7 @@
static const struct proto_ops rfcomm_sock_ops;
static struct bt_sock_list rfcomm_sk_list = {
.lock = RW_LOCK_UNLOCKED
.lock = __RW_LOCK_UNLOCKED(rfcomm_sk_list.lock)
};
static void rfcomm_sock_close(struct sock *sk);

5
net/bluetooth/rfcomm/tty.c
View File

@ -570,12 +570,7 @@ static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err)
return;
rfcomm_dev_del(dev);
/* We have to drop DLC lock here, otherwise
rfcomm_dev_put() will dead lock if it's
the last reference. */
rfcomm_dlc_unlock(dlc);
rfcomm_dev_put(dev);
rfcomm_dlc_lock(dlc);
}
} else
tty_hangup(dev->tty);

2
net/bluetooth/sco.c
View File

@ -58,7 +58,7 @@
static const struct proto_ops sco_sock_ops;
static struct bt_sock_list sco_sk_list = {
.lock = RW_LOCK_UNLOCKED
.lock = __RW_LOCK_UNLOCKED(sco_sk_list.lock)
};
static void __sco_chan_add(struct sco_conn *conn, struct sock *sk, struct sock *parent);

2
net/ipv4/esp4.c
View File

@ -336,7 +336,7 @@ static int esp_input(struct xfrm_state *x, struct sk_buff *skb)
struct scatterlist *asg;
int err = -EINVAL;
if (!pskb_may_pull(skb, sizeof(*esph)))
if (!pskb_may_pull(skb, sizeof(*esph) + crypto_aead_ivsize(aead)))
goto out;
if (elen <= 0)

3
net/ipv4/inet_fragment.c
View File

@ -86,7 +86,10 @@ EXPORT_SYMBOL(inet_frags_fini);
void inet_frags_exit_net(struct netns_frags *nf, struct inet_frags *f)
{
nf->low_thresh = 0;
local_bh_disable();
inet_frag_evictor(nf, f);
local_bh_enable();
}
EXPORT_SYMBOL(inet_frags_exit_net);

2
net/ipv4/ip_forward.c
View File

@ -85,7 +85,7 @@ int ip_forward(struct sk_buff *skb)
if (opt->is_strictroute && rt->rt_dst != rt->rt_gateway)
goto sr_failed;
if (unlikely(skb->len > dst_mtu(&rt->u.dst) &&
if (unlikely(skb->len > dst_mtu(&rt->u.dst) && !skb_is_gso(skb) &&
(ip_hdr(skb)->frag_off & htons(IP_DF))) && !skb->local_df) {
IP_INC_STATS(IPSTATS_MIB_FRAGFAILS);
icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED,

8
net/ipv4/netfilter/ip_queue.c
View File

@ -588,11 +588,9 @@ static int __init ip_queue_init(void)
}
#ifdef CONFIG_PROC_FS
proc = create_proc_entry(IPQ_PROC_FS_NAME, 0, init_net.proc_net);
if (proc) {
proc->owner = THIS_MODULE;
proc->proc_fops = &ip_queue_proc_fops;
} else {
proc = proc_create(IPQ_PROC_FS_NAME, 0, init_net.proc_net,
&ip_queue_proc_fops);
if (!proc) {
printk(KERN_ERR "ip_queue: failed to create proc entry\n");
goto cleanup_ipqnl;
}

5
net/ipv4/netfilter/ipt_CLUSTERIP.c
View File

@ -167,14 +167,13 @@ clusterip_config_init(struct ipt_clusterip_tgt_info *i, __be32 ip,
/* create proc dir entry */
sprintf(buffer, "%u.%u.%u.%u", NIPQUAD(ip));
c->pde = create_proc_entry(buffer, S_IWUSR|S_IRUSR,
clusterip_procdir);
c->pde = proc_create(buffer, S_IWUSR|S_IRUSR,
clusterip_procdir, &clusterip_proc_fops);
if (!c->pde) {
kfree(c);
return NULL;
}
}
c->pde->proc_fops = &clusterip_proc_fops;
c->pde->data = c;
#endif

3
net/ipv4/netfilter/ipt_recent.c
View File

@ -276,12 +276,11 @@ recent_mt_check(const char *tablename, const void *ip,
for (i = 0; i < ip_list_hash_size; i++)
INIT_LIST_HEAD(&t->iphash[i]);
#ifdef CONFIG_PROC_FS
t->proc = create_proc_entry(t->name, ip_list_perms, proc_dir);
t->proc = proc_create(t->name, ip_list_perms, proc_dir, &recent_fops);
if (t->proc == NULL) {
kfree(t);
goto out;
}
t->proc->proc_fops = &recent_fops;
t->proc->uid = ip_list_uid;
t->proc->gid = ip_list_gid;
t->proc->data = t;

7
net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c
View File

@ -395,13 +395,10 @@ int __init nf_conntrack_ipv4_compat_init(void)
if (!proc_exp)
goto err2;
proc_stat = create_proc_entry("ip_conntrack", S_IRUGO, init_net.proc_net_stat);
proc_stat = proc_create("ip_conntrack", S_IRUGO,
init_net.proc_net_stat, &ct_cpu_seq_fops);
if (!proc_stat)
goto err3;
proc_stat->proc_fops = &ct_cpu_seq_fops;
proc_stat->owner = THIS_MODULE;
return 0;
err3:

4
net/ipv4/udp.c
View File

@ -1556,14 +1556,14 @@ static void *udp_seq_start(struct seq_file *seq, loff_t *pos)
__acquires(udp_hash_lock)
{
read_lock(&udp_hash_lock);
return *pos ? udp_get_idx(seq, *pos-1) : (void *)1;
return *pos ? udp_get_idx(seq, *pos-1) : SEQ_START_TOKEN;
}
static void *udp_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
struct sock *sk;
if (v == (void *)1)
if (v == SEQ_START_TOKEN)
sk = udp_get_idx(seq, 0);
else
sk = udp_get_next(seq, v);

19
net/ipv6/addrconf.c
View File

@ -776,6 +776,7 @@ static int ipv6_create_tempaddr(struct inet6_ifaddr *ifp, struct inet6_ifaddr *i
struct inet6_dev *idev = ifp->idev;
struct in6_addr addr, *tmpaddr;
unsigned long tmp_prefered_lft, tmp_valid_lft, tmp_cstamp, tmp_tstamp;
unsigned long regen_advance;
int tmp_plen;
int ret = 0;
int max_addresses;
@ -836,8 +837,23 @@ static int ipv6_create_tempaddr(struct inet6_ifaddr *ifp, struct inet6_ifaddr *i
tmp_tstamp = ifp->tstamp;
spin_unlock_bh(&ifp->lock);
regen_advance = idev->cnf.regen_max_retry *
idev->cnf.dad_transmits *
idev->nd_parms->retrans_time / HZ;
write_unlock(&idev->lock);
/* A temporary address is created only if this calculated Preferred
* Lifetime is greater than REGEN_ADVANCE time units. In particular,
* an implementation must not create a temporary address with a zero
* Preferred Lifetime.
*/
if (tmp_prefered_lft <= regen_advance) {
in6_ifa_put(ifp);
in6_dev_put(idev);
ret = -1;
goto out;
}
addr_flags = IFA_F_TEMPORARY;
/* set in addrconf_prefix_rcv() */
if (ifp->flags & IFA_F_OPTIMISTIC)
@ -1831,6 +1847,9 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len)
* lifetimes of an existing temporary address
* when processing a Prefix Information Option.
*/
if (ifp != ift->ifpub)
continue;
spin_lock(&ift->lock);
flags = ift->flags;
if (ift->valid_lft > valid_lft &&

2
net/ipv6/esp6.c
View File

@ -282,7 +282,7 @@ static int esp6_input(struct xfrm_state *x, struct sk_buff *skb)
struct scatterlist *sg;
struct scatterlist *asg;
if (!pskb_may_pull(skb, sizeof(*esph))) {
if (!pskb_may_pull(skb, sizeof(*esph) + crypto_aead_ivsize(aead))) {
ret = -EINVAL;
goto out;
}

4
net/ipv6/icmp.c
View File

@ -436,10 +436,10 @@ void icmpv6_send(struct sk_buff *skb, int type, int code, __u32 info,
}
if (xfrm_decode_session_reverse(skb, &fl2, AF_INET6))
goto out;
goto out_dst_release;
if (ip6_dst_lookup(sk, &dst2, &fl))
goto out;
goto out_dst_release;
err = xfrm_lookup(&dst2, &fl, sk, XFRM_LOOKUP_ICMP);
if (err == -ENOENT) {

3
net/ipv6/ip6_input.c
View File

@ -239,8 +239,7 @@ int ip6_mc_input(struct sk_buff *skb)
IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INMCASTPKTS);
hdr = ipv6_hdr(skb);
deliver = unlikely(skb->dev->flags & (IFF_PROMISC|IFF_ALLMULTI)) ||
ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);
deliver = ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);
/*
* IPv6 multicast router mode isnt currently supported.

8
net/ipv6/netfilter/ip6_queue.c
View File

@ -591,11 +591,9 @@ static int __init ip6_queue_init(void)
}
#ifdef CONFIG_PROC_FS
proc = create_proc_entry(IPQ_PROC_FS_NAME, 0, init_net.proc_net);
if (proc) {
proc->owner = THIS_MODULE;
proc->proc_fops = &ip6_queue_proc_fops;
} else {
proc = proc_create(IPQ_PROC_FS_NAME, 0, init_net.proc_net,
&ip6_queue_proc_fops);
if (!proc) {
printk(KERN_ERR "ip6_queue: failed to create proc entry\n");
goto cleanup_ipqnl;
}

2
net/ipv6/netfilter/nf_conntrack_reasm.c
View File

@ -171,7 +171,9 @@ static __inline__ void fq_kill(struct nf_ct_frag6_queue *fq)
static void nf_ct_frag6_evictor(void)
{
local_bh_disable();
inet_frag_evictor(&nf_init_frags, &nf_frags);
local_bh_enable();
}
static void nf_ct_frag6_expire(unsigned long data)

3
net/llc/af_llc.c
View File

@ -155,6 +155,9 @@ static int llc_ui_create(struct net *net, struct socket *sock, int protocol)
struct sock *sk;
int rc = -ESOCKTNOSUPPORT;
if (!capable(CAP_NET_RAW))
return -EPERM;
if (net != &init_net)
return -EAFNOSUPPORT;

47
net/llc/llc_c_ac.c
View File

@ -198,7 +198,7 @@ int llc_conn_ac_send_disc_cmd_p_set_x(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@ -223,7 +223,7 @@ int llc_conn_ac_send_dm_rsp_f_set_p(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@ -249,7 +249,7 @@ int llc_conn_ac_send_dm_rsp_f_set_1(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@ -282,7 +282,8 @@ int llc_conn_ac_send_frmr_rsp_f_set_x(struct sock *sk, struct sk_buff *skb)
llc_pdu_decode_pf_bit(skb, &f_bit);
else
f_bit = 0;
nskb = llc_alloc_frame(sk, llc->dev);
nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U,
sizeof(struct llc_frmr_info));
if (nskb) {
struct llc_sap *sap = llc->sap;
@ -306,7 +307,8 @@ int llc_conn_ac_resend_frmr_rsp_f_set_0(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U,
sizeof(struct llc_frmr_info));
if (nskb) {
struct llc_sap *sap = llc->sap;
@ -336,7 +338,8 @@ int llc_conn_ac_resend_frmr_rsp_f_set_p(struct sock *sk, struct sk_buff *skb)
struct llc_sock *llc = llc_sk(sk);
llc_pdu_decode_pf_bit(skb, &f_bit);
nskb = llc_alloc_frame(sk, llc->dev);
nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U,
sizeof(struct llc_frmr_info));
if (nskb) {
struct llc_sap *sap = llc->sap;
struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb);
@ -424,7 +427,7 @@ int llc_conn_ac_resend_i_xxx_x_set_0_or_send_rr(struct sock *sk,
struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb);
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@ -459,7 +462,7 @@ int llc_conn_ac_send_rej_cmd_p_set_1(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@ -483,7 +486,7 @@ int llc_conn_ac_send_rej_rsp_f_set_1(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@ -507,7 +510,7 @@ int llc_conn_ac_send_rej_xxx_x_set_0(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@ -531,7 +534,7 @@ int llc_conn_ac_send_rnr_cmd_p_set_1(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@ -555,7 +558,7 @@ int llc_conn_ac_send_rnr_rsp_f_set_1(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@ -579,7 +582,7 @@ int llc_conn_ac_send_rnr_xxx_x_set_0(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@ -615,7 +618,7 @@ int llc_conn_ac_opt_send_rnr_xxx_x_set_0(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@ -639,7 +642,7 @@ int llc_conn_ac_send_rr_cmd_p_set_1(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@ -663,7 +666,7 @@ int llc_conn_ac_send_rr_rsp_f_set_1(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@ -688,7 +691,7 @@ int llc_conn_ac_send_ack_rsp_f_set_1(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@ -712,7 +715,7 @@ int llc_conn_ac_send_rr_xxx_x_set_0(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@ -736,7 +739,7 @@ int llc_conn_ac_send_ack_xxx_x_set_0(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@ -770,7 +773,7 @@ int llc_conn_ac_send_sabme_cmd_p_set_x(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@ -799,7 +802,7 @@ int llc_conn_ac_send_ua_rsp_f_set_p(struct sock *sk, struct sk_buff *skb)
u8 f_bit;
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
llc_pdu_decode_pf_bit(skb, &f_bit);
if (nskb) {
@ -956,7 +959,7 @@ static int llc_conn_ac_send_rr_rsp_f_set_ackpf(struct sock *sk,
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;

9
net/llc/llc_core.c
View File

@ -25,8 +25,6 @@
LIST_HEAD(llc_sap_list);
DEFINE_RWLOCK(llc_sap_list_lock);
unsigned char llc_station_mac_sa[ETH_ALEN];
/**
* llc_sap_alloc - allocates and initializes sap.
*
@ -37,8 +35,8 @@ static struct llc_sap *llc_sap_alloc(void)
struct llc_sap *sap = kzalloc(sizeof(*sap), GFP_ATOMIC);
if (sap) {
/* sap->laddr.mac - leave as a null, it's filled by bind */
sap->state = LLC_SAP_STATE_ACTIVE;
memcpy(sap->laddr.mac, llc_station_mac_sa, ETH_ALEN);
rwlock_init(&sap->sk_list.lock);
atomic_set(&sap->refcnt, 1);
}
@ -167,10 +165,6 @@ static int __init llc_init(void)
if (dev != NULL)
dev = next_net_device(dev);
if (dev != NULL)
memcpy(llc_station_mac_sa, dev->dev_addr, ETH_ALEN);
else
memset(llc_station_mac_sa, 0, ETH_ALEN);
dev_add_pack(&llc_packet_type);
dev_add_pack(&llc_tr_packet_type);
return 0;
@ -185,7 +179,6 @@ static void __exit llc_exit(void)
module_init(llc_init);
module_exit(llc_exit);
EXPORT_SYMBOL(llc_station_mac_sa);
EXPORT_SYMBOL(llc_sap_list);
EXPORT_SYMBOL(llc_sap_list_lock);
EXPORT_SYMBOL(llc_sap_find);

6
net/llc/llc_input.c
View File

@ -117,8 +117,12 @@ static inline int llc_fixup_skb(struct sk_buff *skb)
skb_pull(skb, llc_len);
if (skb->protocol == htons(ETH_P_802_2)) {
__be16 pdulen = eth_hdr(skb)->h_proto;
u16 data_size = ntohs(pdulen) - llc_len;
s32 data_size = ntohs(pdulen) - llc_len;
if (data_size < 0 ||
((skb_tail_pointer(skb) -
(u8 *)pdu) - llc_len) < data_size)
return 0;
if (unlikely(pskb_trim_rcsum(skb, data_size)))
return 0;
}

2
net/llc/llc_pdu.c
View File

@ -241,7 +241,7 @@ void llc_pdu_init_as_frmr_rsp(struct sk_buff *skb, struct llc_pdu_sn *prev_pdu,
FRMR_INFO_SET_PDU_INFO_2LONG_IND(frmr_info, vzyxw);
FRMR_INFO_SET_PDU_INVALID_Nr_IND(frmr_info, vzyxw);
FRMR_INFO_SET_PDU_INVALID_Ns_IND(frmr_info, vzyxw);
skb_put(skb, 5);
skb_put(skb, sizeof(struct llc_frmr_info));
}
/**

9
net/llc/llc_s_ac.c
View File

@ -103,7 +103,8 @@ int llc_sap_action_send_xid_r(struct llc_sap *sap, struct sk_buff *skb)
llc_pdu_decode_sa(skb, mac_da);
llc_pdu_decode_da(skb, mac_sa);
llc_pdu_decode_ssap(skb, &dsap);
nskb = llc_alloc_frame(NULL, skb->dev);
nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U,
sizeof(struct llc_xid_info));
if (!nskb)
goto out;
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, sap->laddr.lsap, dsap,
@ -144,11 +145,15 @@ int llc_sap_action_send_test_r(struct llc_sap *sap, struct sk_buff *skb)
u8 mac_da[ETH_ALEN], mac_sa[ETH_ALEN], dsap;
struct sk_buff *nskb;
int rc = 1;
u32 data_size;
llc_pdu_decode_sa(skb, mac_da);
llc_pdu_decode_da(skb, mac_sa);
llc_pdu_decode_ssap(skb, &dsap);
nskb = llc_alloc_frame(NULL, skb->dev);
/* The test request command is type U (llc_len = 3) */
data_size = ntohs(eth_hdr(skb)->h_proto) - 3;
nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, data_size);
if (!nskb)
goto out;
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, sap->laddr.lsap, dsap,

27
net/llc/llc_sap.c
View File

@ -24,20 +24,41 @@
#include <net/tcp_states.h>
#include <linux/llc.h>
static int llc_mac_header_len(unsigned short devtype)
{
switch (devtype) {
case ARPHRD_ETHER:
case ARPHRD_LOOPBACK:
return sizeof(struct ethhdr);
#ifdef CONFIG_TR
case ARPHRD_IEEE802_TR:
return sizeof(struct trh_hdr);
#endif
}
return 0;
}
/**
* llc_alloc_frame - allocates sk_buff for frame
* @dev: network device this skb will be sent over
* @type: pdu type to allocate
* @data_size: data size to allocate
*
* Allocates an sk_buff for frame and initializes sk_buff fields.
* Returns allocated skb or %NULL when out of memory.
*/
struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev)
struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev,
u8 type, u32 data_size)
{
struct sk_buff *skb = alloc_skb(128, GFP_ATOMIC);
int hlen = type == LLC_PDU_TYPE_U ? 3 : 4;
struct sk_buff *skb;
hlen += llc_mac_header_len(dev->type);
skb = alloc_skb(hlen + data_size, GFP_ATOMIC);
if (skb) {
skb_reset_mac_header(skb);
skb_reserve(skb, 50);
skb_reserve(skb, hlen);
skb_reset_network_header(skb);
skb_reset_transport_header(skb);
skb->protocol = htons(ETH_P_802_2);

19
net/llc/llc_station.c
View File

@ -253,13 +253,14 @@ static int llc_station_ac_inc_xid_r_cnt_by_1(struct sk_buff *skb)
static int llc_station_ac_send_null_dsap_xid_c(struct sk_buff *skb)
{
int rc = 1;
struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev);
struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U,
sizeof(struct llc_xid_info));
if (!nskb)
goto out;
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, 0, LLC_PDU_CMD);
llc_pdu_init_as_xid_cmd(nskb, LLC_XID_NULL_CLASS_2, 127);
rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, llc_station_mac_sa);
rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, skb->dev->dev_addr);
if (unlikely(rc))
goto free;
llc_station_send_pdu(nskb);
@ -274,7 +275,8 @@ static int llc_station_ac_send_xid_r(struct sk_buff *skb)
{
u8 mac_da[ETH_ALEN], dsap;
int rc = 1;
struct sk_buff* nskb = llc_alloc_frame(NULL, skb->dev);
struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U,
sizeof(struct llc_xid_info));
if (!nskb)
goto out;
@ -283,7 +285,7 @@ static int llc_station_ac_send_xid_r(struct sk_buff *skb)
llc_pdu_decode_ssap(skb, &dsap);
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, dsap, LLC_PDU_RSP);
llc_pdu_init_as_xid_rsp(nskb, LLC_XID_NULL_CLASS_2, 127);
rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, mac_da);
rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, mac_da);
if (unlikely(rc))
goto free;
llc_station_send_pdu(nskb);
@ -298,7 +300,12 @@ static int llc_station_ac_send_test_r(struct sk_buff *skb)
{
u8 mac_da[ETH_ALEN], dsap;
int rc = 1;
struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev);
u32 data_size;
struct sk_buff *nskb;
/* The test request command is type U (llc_len = 3) */
data_size = ntohs(eth_hdr(skb)->h_proto) - 3;
nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, data_size);
if (!nskb)
goto out;
@ -307,7 +314,7 @@ static int llc_station_ac_send_test_r(struct sk_buff *skb)
llc_pdu_decode_ssap(skb, &dsap);
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, dsap, LLC_PDU_RSP);
llc_pdu_init_as_test_rsp(nskb, skb);
rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, mac_da);
rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, mac_da);
if (unlikely(rc))
goto free;
llc_station_send_pdu(nskb);

12
net/mac80211/ieee80211.c
View File

@ -286,6 +286,18 @@ static int ieee80211_open(struct net_device *dev)
if (need_hw_reconfig)
ieee80211_hw_config(local);
/*
* ieee80211_sta_work is disabled while network interface
* is down. Therefore, some configuration changes may not
* yet be effective. Trigger execution of ieee80211_sta_work
* to fix this.
*/
if(sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
queue_work(local->hw.workqueue, &ifsta->work);
}
netif_start_queue(dev);
return 0;

9
net/mac80211/ieee80211_sta.c
View File

@ -319,7 +319,7 @@ static u32 ieee80211_handle_erp_ie(struct ieee80211_sub_if_data *sdata,
struct ieee80211_bss_conf *bss_conf = &sdata->bss_conf;
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
bool use_protection = (erp_value & WLAN_ERP_USE_PROTECTION) != 0;
bool preamble_mode = (erp_value & WLAN_ERP_BARKER_PREAMBLE) != 0;
bool use_short_preamble = (erp_value & WLAN_ERP_BARKER_PREAMBLE) == 0;
DECLARE_MAC_BUF(mac);
u32 changed = 0;
@ -335,16 +335,15 @@ static u32 ieee80211_handle_erp_ie(struct ieee80211_sub_if_data *sdata,
changed |= BSS_CHANGED_ERP_CTS_PROT;
}
if (preamble_mode != bss_conf->use_short_preamble) {
if (use_short_preamble != bss_conf->use_short_preamble) {
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: switched to %s barker preamble"
" (BSSID=%s)\n",
sdata->dev->name,
(preamble_mode == WLAN_ERP_PREAMBLE_SHORT) ?
"short" : "long",
use_short_preamble ? "short" : "long",
print_mac(mac, ifsta->bssid));
}
bss_conf->use_short_preamble = preamble_mode;
bss_conf->use_short_preamble = use_short_preamble;
changed |= BSS_CHANGED_ERP_PREAMBLE;
}

9
net/netfilter/nf_conntrack_standalone.c
View File

@ -395,7 +395,7 @@ EXPORT_SYMBOL_GPL(nf_ct_log_invalid);
static int __init nf_conntrack_standalone_init(void)
{
#ifdef CONFIG_PROC_FS
struct proc_dir_entry *proc, *proc_stat;
struct proc_dir_entry *proc;
#endif
int ret = 0;
@ -407,12 +407,9 @@ static int __init nf_conntrack_standalone_init(void)
proc = proc_net_fops_create(&init_net, "nf_conntrack", 0440, &ct_file_ops);
if (!proc) goto cleanup_init;
proc_stat = create_proc_entry("nf_conntrack", S_IRUGO, init_net.proc_net_stat);
if (!proc_stat)
if (!proc_create("nf_conntrack", S_IRUGO,
init_net.proc_net_stat, &ct_cpu_seq_fops))
goto cleanup_proc;
proc_stat->proc_fops = &ct_cpu_seq_fops;
proc_stat->owner = THIS_MODULE;
#endif
#ifdef CONFIG_SYSCTL
nf_ct_sysctl_header = register_sysctl_paths(nf_ct_path,

8
net/netfilter/nf_log.c
View File

@ -168,13 +168,9 @@ static const struct file_operations nflog_file_ops = {
int __init netfilter_log_init(void)
{
#ifdef CONFIG_PROC_FS
struct proc_dir_entry *pde;
pde = create_proc_entry("nf_log", S_IRUGO, proc_net_netfilter);
if (!pde)
if (!proc_create("nf_log", S_IRUGO,
proc_net_netfilter, &nflog_file_ops))
return -1;
pde->proc_fops = &nflog_file_ops;
#endif
return 0;
}

7
net/netfilter/nf_queue.c
View File

@ -348,12 +348,9 @@ static const struct file_operations nfqueue_file_ops = {
int __init netfilter_queue_init(void)
{
#ifdef CONFIG_PROC_FS
struct proc_dir_entry *pde;
pde = create_proc_entry("nf_queue", S_IRUGO, proc_net_netfilter);
if (!pde)
if (!proc_create("nf_queue", S_IRUGO,
proc_net_netfilter, &nfqueue_file_ops))
return -1;
pde->proc_fops = &nfqueue_file_ops;
#endif
return 0;
}

9
net/netfilter/nfnetlink_log.c
View File

@ -923,9 +923,6 @@ static const struct file_operations nful_file_ops = {
static int __init nfnetlink_log_init(void)
{
int i, status = -ENOMEM;
#ifdef CONFIG_PROC_FS
struct proc_dir_entry *proc_nful;
#endif
for (i = 0; i < INSTANCE_BUCKETS; i++)
INIT_HLIST_HEAD(&instance_table[i]);
@ -943,11 +940,9 @@ static int __init nfnetlink_log_init(void)
}
#ifdef CONFIG_PROC_FS
proc_nful = create_proc_entry("nfnetlink_log", 0440,
proc_net_netfilter);
if (!proc_nful)
if (!proc_create("nfnetlink_log", 0440,
proc_net_netfilter, &nful_file_ops))
goto cleanup_subsys;
proc_nful->proc_fops = &nful_file_ops;
#endif
return status;

9
net/netfilter/nfnetlink_queue.c
View File

@ -896,9 +896,6 @@ static const struct file_operations nfqnl_file_ops = {
static int __init nfnetlink_queue_init(void)
{
int i, status = -ENOMEM;
#ifdef CONFIG_PROC_FS
struct proc_dir_entry *proc_nfqueue;
#endif
for (i = 0; i < INSTANCE_BUCKETS; i++)
INIT_HLIST_HEAD(&instance_table[i]);
@ -911,11 +908,9 @@ static int __init nfnetlink_queue_init(void)
}
#ifdef CONFIG_PROC_FS
proc_nfqueue = create_proc_entry("nfnetlink_queue", 0440,
proc_net_netfilter);
if (!proc_nfqueue)
if (!proc_create("nfnetlink_queue", 0440,
proc_net_netfilter, &nfqnl_file_ops))
goto cleanup_subsys;
proc_nfqueue->proc_fops = &nfqnl_file_ops;
#endif
register_netdevice_notifier(&nfqnl_dev_notifier);

16
net/netfilter/xt_hashlimit.c
View File

@ -237,14 +237,14 @@ static int htable_create_v0(struct xt_hashlimit_info *minfo, int family)
hinfo->family = family;
hinfo->rnd_initialized = 0;
spin_lock_init(&hinfo->lock);
hinfo->pde = create_proc_entry(minfo->name, 0,
family == AF_INET ? hashlimit_procdir4 :
hashlimit_procdir6);
hinfo->pde = proc_create(minfo->name, 0,
family == AF_INET ? hashlimit_procdir4 :
hashlimit_procdir6,
&dl_file_ops);
if (!hinfo->pde) {
vfree(hinfo);
return -1;
}
hinfo->pde->proc_fops = &dl_file_ops;
hinfo->pde->data = hinfo;
setup_timer(&hinfo->timer, htable_gc, (unsigned long )hinfo);
@ -301,14 +301,14 @@ static int htable_create(struct xt_hashlimit_mtinfo1 *minfo,
hinfo->rnd_initialized = 0;
spin_lock_init(&hinfo->lock);
hinfo->pde = create_proc_entry(minfo->name, 0,
family == AF_INET ? hashlimit_procdir4 :
hashlimit_procdir6);
hinfo->pde = proc_create(minfo->name, 0,
family == AF_INET ? hashlimit_procdir4 :
hashlimit_procdir6,
&dl_file_ops);
if (hinfo->pde == NULL) {
vfree(hinfo);
return -1;
}
hinfo->pde->proc_fops = &dl_file_ops;
hinfo->pde->data = hinfo;
setup_timer(&hinfo->timer, htable_gc, (unsigned long)hinfo);

9
net/rose/af_rose.c
View File

@ -598,17 +598,24 @@ static int rose_release(struct socket *sock)
if (sk == NULL) return 0;
sock_hold(sk);
sock_orphan(sk);
lock_sock(sk);
rose = rose_sk(sk);
switch (rose->state) {
case ROSE_STATE_0:
release_sock(sk);
rose_disconnect(sk, 0, -1, -1);
lock_sock(sk);
rose_destroy_socket(sk);
break;
case ROSE_STATE_2:
rose->neighbour->use--;
release_sock(sk);
rose_disconnect(sk, 0, -1, -1);
lock_sock(sk);
rose_destroy_socket(sk);
break;
@ -633,6 +640,8 @@ static int rose_release(struct socket *sock)
}
sock->sk = NULL;
release_sock(sk);
sock_put(sk);
return 0;
}

18
net/sched/sch_generic.c
View File

@ -184,10 +184,22 @@ static inline int qdisc_restart(struct net_device *dev)
void __qdisc_run(struct net_device *dev)
{
do {
if (!qdisc_restart(dev))
unsigned long start_time = jiffies;
while (qdisc_restart(dev)) {
if (netif_queue_stopped(dev))
break;
} while (!netif_queue_stopped(dev));
/*
* Postpone processing if
* 1. another process needs the CPU;
* 2. we've been doing it for too long.
*/
if (need_resched() || jiffies != start_time) {
netif_schedule(dev);
break;
}
}
clear_bit(__LINK_STATE_QDISC_RUNNING, &dev->state);
}