mirror of https://gitee.com/openkylin/linux.git
hwmon: I2C bus support for lis3lv02d and variant accelerometer chips
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Éric Piel <eric.piel@tremplin-utc.net> Cc: Kalhan Trisal <kalhan.trisal@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Samu Onkalo
Linus Torvalds
parent
ec8e2f7466
commit
312ea07bf0
|
|
@ -998,6 +998,23 @@ config SENSORS_LIS3_SPI
|
|||
will be called lis3lv02d and a specific module for the SPI transport
|
||||
is called lis3lv02d_spi.
|
||||
|
||||
config SENSORS_LIS3_I2C
|
||||
tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)"
|
||||
depends on I2C && INPUT
|
||||
select INPUT_POLLDEV
|
||||
default n
|
||||
help
|
||||
This driver provides support for the LIS3LV02Dx accelerometer connected
|
||||
via I2C. The accelerometer data is readable via
|
||||
/sys/devices/platform/lis3lv02d.
|
||||
|
||||
This driver also provides an absolute input class device, allowing
|
||||
the device to act as a pinball machine-esque joystick.
|
||||
|
||||
This driver can also be built as modules. If so, the core module
|
||||
will be called lis3lv02d and a specific module for the I2C transport
|
||||
is called lis3lv02d_i2c.
|
||||
|
||||
config SENSORS_APPLESMC
|
||||
tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
|
||||
depends on INPUT && X86
|
||||
|
|
|
|||
|
|
@ -55,6 +55,7 @@ obj-$(CONFIG_SENSORS_IT87) += it87.o
|
|||
obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
|
||||
obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o
|
||||
obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d.o lis3lv02d_spi.o
|
||||
obj-$(CONFIG_SENSORS_LIS3_I2C) += lis3lv02d.o lis3lv02d_i2c.o
|
||||
obj-$(CONFIG_SENSORS_LM63) += lm63.o
|
||||
obj-$(CONFIG_SENSORS_LM70) += lm70.o
|
||||
obj-$(CONFIG_SENSORS_LM73) += lm73.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,183 @@
|
|||
/*
|
||||
* drivers/hwmon/lis3lv02d_i2c.c
|
||||
*
|
||||
* Implements I2C interface for lis3lv02d (STMicroelectronics) accelerometer.
|
||||
* Driver is based on corresponding SPI driver written by Daniel Mack
|
||||
* (lis3lv02d_spi.c (C) 2009 Daniel Mack <daniel@caiaq.de> ).
|
||||
*
|
||||
* Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
|
||||
*
|
||||
* Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful, but
|
||||
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
|
||||
* 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "lis3lv02d.h"
|
||||
|
||||
#define DRV_NAME "lis3lv02d_i2c"
|
||||
|
||||
static inline s32 lis3_i2c_write(struct lis3lv02d *lis3, int reg, u8 value)
|
||||
{
|
||||
struct i2c_client *c = lis3->bus_priv;
|
||||
return i2c_smbus_write_byte_data(c, reg, value);
|
||||
}
|
||||
|
||||
static inline s32 lis3_i2c_read(struct lis3lv02d *lis3, int reg, u8 *v)
|
||||
{
|
||||
struct i2c_client *c = lis3->bus_priv;
|
||||
*v = i2c_smbus_read_byte_data(c, reg);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int lis3_i2c_init(struct lis3lv02d *lis3)
|
||||
{
|
||||
u8 reg;
|
||||
int ret;
|
||||
|
||||
/* power up the device */
|
||||
ret = lis3->read(lis3, CTRL_REG1, ®);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
reg |= CTRL1_PD0;
|
||||
return lis3->write(lis3, CTRL_REG1, reg);
|
||||
}
|
||||
|
||||
/* Default axis mapping but it can be overwritten by platform data */
|
||||
static struct axis_conversion lis3lv02d_axis_map = { LIS3_DEV_X,
|
||||
LIS3_DEV_Y,
|
||||
LIS3_DEV_Z };
|
||||
|
||||
static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
int ret = 0;
|
||||
struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
|
||||
|
||||
if (pdata) {
|
||||
if (pdata->axis_x)
|
||||
lis3lv02d_axis_map.x = pdata->axis_x;
|
||||
|
||||
if (pdata->axis_y)
|
||||
lis3lv02d_axis_map.y = pdata->axis_y;
|
||||
|
||||
if (pdata->axis_z)
|
||||
lis3lv02d_axis_map.z = pdata->axis_z;
|
||||
|
||||
if (pdata->setup_resources)
|
||||
ret = pdata->setup_resources();
|
||||
|
||||
if (ret)
|
||||
goto fail;
|
||||
}
|
||||
|
||||
lis3_dev.pdata = pdata;
|
||||
lis3_dev.bus_priv = client;
|
||||
lis3_dev.init = lis3_i2c_init;
|
||||
lis3_dev.read = lis3_i2c_read;
|
||||
lis3_dev.write = lis3_i2c_write;
|
||||
lis3_dev.irq = client->irq;
|
||||
lis3_dev.ac = lis3lv02d_axis_map;
|
||||
|
||||
i2c_set_clientdata(client, &lis3_dev);
|
||||
ret = lis3lv02d_init_device(&lis3_dev);
|
||||
fail:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client)
|
||||
{
|
||||
struct lis3lv02d *lis3 = i2c_get_clientdata(client);
|
||||
struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
|
||||
|
||||
if (pdata && pdata->release_resources)
|
||||
pdata->release_resources();
|
||||
|
||||
lis3lv02d_joystick_disable();
|
||||
lis3lv02d_poweroff(lis3);
|
||||
|
||||
return lis3lv02d_remove_fs(&lis3_dev);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
static int lis3lv02d_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
|
||||
{
|
||||
struct lis3lv02d *lis3 = i2c_get_clientdata(client);
|
||||
|
||||
if (!lis3->pdata->wakeup_flags)
|
||||
lis3lv02d_poweroff(lis3);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int lis3lv02d_i2c_resume(struct i2c_client *client)
|
||||
{
|
||||
struct lis3lv02d *lis3 = i2c_get_clientdata(client);
|
||||
|
||||
if (!lis3->pdata->wakeup_flags)
|
||||
lis3lv02d_poweron(lis3);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void lis3lv02d_i2c_shutdown(struct i2c_client *client)
|
||||
{
|
||||
lis3lv02d_i2c_suspend(client, PMSG_SUSPEND);
|
||||
}
|
||||
#else
|
||||
#define lis3lv02d_i2c_suspend NULL
|
||||
#define lis3lv02d_i2c_resume NULL
|
||||
#define lis3lv02d_i2c_shutdown NULL
|
||||
#endif
|
||||
|
||||
static const struct i2c_device_id lis3lv02d_id[] = {
|
||||
{"lis3lv02d", 0 },
|
||||
{}
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(i2c, lis3lv02d_id);
|
||||
|
||||
static struct i2c_driver lis3lv02d_i2c_driver = {
|
||||
.driver = {
|
||||
.name = DRV_NAME,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.suspend = lis3lv02d_i2c_suspend,
|
||||
.shutdown = lis3lv02d_i2c_shutdown,
|
||||
.resume = lis3lv02d_i2c_resume,
|
||||
.probe = lis3lv02d_i2c_probe,
|
||||
.remove = __devexit_p(lis3lv02d_i2c_remove),
|
||||
.id_table = lis3lv02d_id,
|
||||
};
|
||||
|
||||
static int __init lis3lv02d_init(void)
|
||||
{
|
||||
return i2c_add_driver(&lis3lv02d_i2c_driver);
|
||||
}
|
||||
|
||||
static void __exit lis3lv02d_exit(void)
|
||||
{
|
||||
i2c_del_driver(&lis3lv02d_i2c_driver);
|
||||
}
|
||||
|
||||
MODULE_AUTHOR("Nokia Corporation");
|
||||
MODULE_DESCRIPTION("lis3lv02d I2C interface");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
module_init(lis3lv02d_init);
|
||||
module_exit(lis3lv02d_exit);
|
||||
Loading…
Reference in New Issue