diff --git a/include/sound/uda1341.h b/include/sound/uda1341.h deleted file mode 100644 index 110d5dc3a2be..000000000000 --- a/include/sound/uda1341.h +++ /dev/null @@ -1,126 +0,0 @@ -/* - * linux/include/linux/l3/uda1341.h - * - * Philips UDA1341 mixer device driver for ALSA - * - * Copyright (c) 2002 Tomas Kasparek - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License. - * - * History: - * - * 2002-03-13 Tomas Kasparek Initial release - based on uda1341.h from OSS - * 2002-03-30 Tomas Kasparek Proc filesystem support, complete mixer and DSP - * features support - */ - -#define UDA1341_ALSA_NAME "snd-uda1341" - -/* - * Default rate set after inicialization - */ -#define AUDIO_RATE_DEFAULT 44100 - -/* - * UDA1341 L3 address and command types - */ -#define UDA1341_L3ADDR 5 -#define UDA1341_DATA0 (UDA1341_L3ADDR << 2 | 0) -#define UDA1341_DATA1 (UDA1341_L3ADDR << 2 | 1) -#define UDA1341_STATUS (UDA1341_L3ADDR << 2 | 2) - -enum uda1341_onoff { - OFF=0, - ON, -}; - -enum uda1341_format { - I2S=0, - LSB16, - LSB18, - LSB20, - MSB, - LSB16MSB, - LSB18MSB, - LSB20MSB, -}; - -enum uda1341_fs { - F512=0, - F384, - F256, - Funused, -}; - -enum uda1341_peak { - BEFORE=0, - AFTER, -}; - -enum uda1341_filter { - FLAT=0, - MIN, - MIN2, - MAX, -}; - -enum uda1341_mixer { - DOUBLE, - LINE, - MIC, - MIXER, -}; - -enum uda1341_deemp { - NONE, - D32, - D44, - D48, -}; - -enum uda1341_config { - CMD_READ_REG = 0, - CMD_RESET, - CMD_FS, - CMD_FORMAT, - CMD_OGAIN, - CMD_IGAIN, - CMD_DAC, - CMD_ADC, - CMD_VOLUME, - CMD_BASS, - CMD_TREBBLE, - CMD_PEAK, - CMD_DEEMP, - CMD_MUTE, - CMD_FILTER, - CMD_CH1, - CMD_CH2, - CMD_MIC, - CMD_MIXER, - CMD_AGC, - CMD_IG, - CMD_AGC_TIME, - CMD_AGC_LEVEL, -#ifdef CONFIG_PM - CMD_SUSPEND, - CMD_RESUME, -#endif - CMD_LAST, -}; - -enum write_through { - //used in update_bits (write_cfg) to avoid l3_write - just update local copy of regs. - REGS_ONLY=0, - //update local regs and write value to uda1341 - do l3_write - FLUSH, -}; - -int __init snd_chip_uda1341_mixer_new(struct snd_card *card, struct l3_client **clnt); - -/* - * Local variables: - * indent-tabs-mode: t - * End: - */ diff --git a/sound/arm/Kconfig b/sound/arm/Kconfig index f8e6de48d816..885683a3b0bd 100644 --- a/sound/arm/Kconfig +++ b/sound/arm/Kconfig @@ -11,17 +11,6 @@ menuconfig SND_ARM if SND_ARM -config SND_SA11XX_UDA1341 - tristate "SA11xx UDA1341TS driver (iPaq H3600)" - depends on ARCH_SA1100 && L3 - select SND_PCM - help - Say Y here if you have a Compaq iPaq H3x00 handheld computer - and want to use its Philips UDA 1341 audio chip. - - To compile this driver as a module, choose M here: the module - will be called snd-sa11xx-uda1341. - config SND_ARMAACI tristate "ARM PrimeCell PL041 AC Link support" depends on ARM_AMBA diff --git a/sound/arm/Makefile b/sound/arm/Makefile index 2054de11de8a..5a549ed6c8aa 100644 --- a/sound/arm/Makefile +++ b/sound/arm/Makefile @@ -2,9 +2,6 @@ # Makefile for ALSA # -obj-$(CONFIG_SND_SA11XX_UDA1341) += snd-sa11xx-uda1341.o -snd-sa11xx-uda1341-objs := sa11xx-uda1341.o - obj-$(CONFIG_SND_ARMAACI) += snd-aaci.o snd-aaci-objs := aaci.o devdma.o diff --git a/sound/arm/sa11xx-uda1341.c b/sound/arm/sa11xx-uda1341.c deleted file mode 100644 index 7101d3d8bae6..000000000000 --- a/sound/arm/sa11xx-uda1341.c +++ /dev/null @@ -1,984 +0,0 @@ -/* - * Driver for Philips UDA1341TS on Compaq iPAQ H3600 soundcard - * Copyright (C) 2002 Tomas Kasparek - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License. - * - * History: - * - * 2002-03-13 Tomas Kasparek initial release - based on h3600-uda1341.c from OSS - * 2002-03-20 Tomas Kasparek playback over ALSA is working - * 2002-03-28 Tomas Kasparek playback over OSS emulation is working - * 2002-03-29 Tomas Kasparek basic capture is working (native ALSA) - * 2002-03-29 Tomas Kasparek capture is working (OSS emulation) - * 2002-04-04 Tomas Kasparek better rates handling (allow non-standard rates) - * 2003-02-14 Brian Avery fixed full duplex mode, other updates - * 2003-02-20 Tomas Kasparek merged updates by Brian (except HAL) - * 2003-04-19 Jaroslav Kysela recoded DMA stuff to follow 2.4.18rmk3-hh24 kernel - * working suspend and resume - * 2003-04-28 Tomas Kasparek updated work by Jaroslav to compile it under 2.5.x again - * merged HAL layer (patches from Brian) - */ - -/*************************************************************************************************** -* -* To understand what Alsa Drivers should be doing look at "Writing an Alsa Driver" by Takashi Iwai -* available in the Alsa doc section on the website -* -* A few notes to make things clearer. The UDA1341 is hooked up to Serial port 4 on the SA1100. -* We are using SSP mode to talk to the UDA1341. The UDA1341 bit & wordselect clocks are generated -* by this UART. Unfortunately, the clock only runs if the transmit buffer has something in it. -* So, if we are just recording, we feed the transmit DMA stream a bunch of 0x0000 so that the -* transmit buffer is full and the clock keeps going. The zeroes come from FLUSH_BASE_PHYS which -* is a mem loc that always decodes to 0's w/ no off chip access. -* -* Some alsa terminology: -* frame => num_channels * sample_size e.g stereo 16 bit is 2 * 16 = 32 bytes -* period => the least number of bytes that will generate an interrupt e.g. we have a 1024 byte -* buffer and 4 periods in the runtime structure this means we'll get an int every 256 -* bytes or 4 times per buffer. -* A number of the sizes are in frames rather than bytes, use frames_to_bytes and -* bytes_to_frames to convert. The easiest way to tell the units is to look at the -* type i.e. runtime-> buffer_size is in frames and its type is snd_pcm_uframes_t -* -* Notes about the pointer fxn: -* The pointer fxn needs to return the offset into the dma buffer in frames. -* Interrupts must be blocked before calling the dma_get_pos fxn to avoid race with interrupts. -* -* Notes about pause/resume -* Implementing this would be complicated so it's skipped. The problem case is: -* A full duplex connection is going, then play is paused. At this point you need to start xmitting -* 0's to keep the record active which means you cant just freeze the dma and resume it later you'd -* need to save off the dma info, and restore it properly on a resume. Yeach! -* -* Notes about transfer methods: -* The async write calls fail. I probably need to implement something else to support them? -* -***************************************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_PM -#include -#endif - -#include -#include -#include -#include - -#include -#include -#include - -#include - -#undef DEBUG_MODE -#undef DEBUG_FUNCTION_NAMES -#include - -/* - * FIXME: Is this enough as autodetection of 2.4.X-rmkY-hhZ kernels? - * We use DMA stuff from 2.4.18-rmk3-hh24 here to be able to compile this - * module for Familiar 0.6.1 - */ - -/* {{{ Type definitions */ - -MODULE_AUTHOR("Tomas Kasparek "); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("SA1100/SA1111 + UDA1341TS driver for ALSA"); -MODULE_SUPPORTED_DEVICE("{{UDA1341,iPAQ H3600 UDA1341TS}}"); - -static char *id; /* ID for this card */ - -module_param(id, charp, 0444); -MODULE_PARM_DESC(id, "ID string for SA1100/SA1111 + UDA1341TS soundcard."); - -struct audio_stream { - char *id; /* identification string */ - int stream_id; /* numeric identification */ - dma_device_t dma_dev; /* device identifier for DMA */ -#ifdef HH_VERSION - dmach_t dmach; /* dma channel identification */ -#else - dma_regs_t *dma_regs; /* points to our DMA registers */ -#endif - unsigned int active:1; /* we are using this stream for transfer now */ - int period; /* current transfer period */ - int periods; /* current count of periods registerd in the DMA engine */ - int tx_spin; /* are we recoding - flag used to do DMA trans. for sync */ - unsigned int old_offset; - spinlock_t dma_lock; /* for locking in DMA operations (see dma-sa1100.c in the kernel) */ - struct snd_pcm_substream *stream; -}; - -struct sa11xx_uda1341 { - struct snd_card *card; - struct l3_client *uda1341; - struct snd_pcm *pcm; - long samplerate; - struct audio_stream s[2]; /* playback & capture */ -}; - -static unsigned int rates[] = { - 8000, 10666, 10985, 14647, - 16000, 21970, 22050, 24000, - 29400, 32000, 44100, 48000, -}; - -static struct snd_pcm_hw_constraint_list hw_constraints_rates = { - .count = ARRAY_SIZE(rates), - .list = rates, - .mask = 0, -}; - -static struct platform_device *device; - -/* }}} */ - -/* {{{ Clock and sample rate stuff */ - -/* - * Stop-gap solution until rest of hh.org HAL stuff is merged. - */ -#define GPIO_H3600_CLK_SET0 GPIO_GPIO (12) -#define GPIO_H3600_CLK_SET1 GPIO_GPIO (13) - -#ifdef CONFIG_SA1100_H3XXX -#define clr_sa11xx_uda1341_egpio(x) clr_h3600_egpio(x) -#define set_sa11xx_uda1341_egpio(x) set_h3600_egpio(x) -#else -#error This driver could serve H3x00 handhelds only! -#endif - -static void sa11xx_uda1341_set_audio_clock(long val) -{ - switch (val) { - case 24000: case 32000: case 48000: /* 00: 12.288 MHz */ - GPCR = GPIO_H3600_CLK_SET0 | GPIO_H3600_CLK_SET1; - break; - - case 22050: case 29400: case 44100: /* 01: 11.2896 MHz */ - GPSR = GPIO_H3600_CLK_SET0; - GPCR = GPIO_H3600_CLK_SET1; - break; - - case 8000: case 10666: case 16000: /* 10: 4.096 MHz */ - GPCR = GPIO_H3600_CLK_SET0; - GPSR = GPIO_H3600_CLK_SET1; - break; - - case 10985: case 14647: case 21970: /* 11: 5.6245 MHz */ - GPSR = GPIO_H3600_CLK_SET0 | GPIO_H3600_CLK_SET1; - break; - } -} - -static void sa11xx_uda1341_set_samplerate(struct sa11xx_uda1341 *sa11xx_uda1341, long rate) -{ - int clk_div = 0; - int clk=0; - - /* We don't want to mess with clocks when frames are in flight */ - Ser4SSCR0 &= ~SSCR0_SSE; - /* wait for any frame to complete */ - udelay(125); - - /* - * We have the following clock sources: - * 4.096 MHz, 5.6245 MHz, 11.2896 MHz, 12.288 MHz - * Those can be divided either by 256, 384 or 512. - * This makes up 12 combinations for the following samplerates... - */ - if (rate >= 48000) - rate = 48000; - else if (rate >= 44100) - rate = 44100; - else if (rate >= 32000) - rate = 32000; - else if (rate >= 29400) - rate = 29400; - else if (rate >= 24000) - rate = 24000; - else if (rate >= 22050) - rate = 22050; - else if (rate >= 21970) - rate = 21970; - else if (rate >= 16000) - rate = 16000; - else if (rate >= 14647) - rate = 14647; - else if (rate >= 10985) - rate = 10985; - else if (rate >= 10666) - rate = 10666; - else - rate = 8000; - - /* Set the external clock generator */ - - sa11xx_uda1341_set_audio_clock(rate); - - /* Select the clock divisor */ - switch (rate) { - case 8000: - case 10985: - case 22050: - case 24000: - clk = F512; - clk_div = SSCR0_SerClkDiv(16); - break; - case 16000: - case 21970: - case 44100: - case 48000: - clk = F256; - clk_div = SSCR0_SerClkDiv(8); - break; - case 10666: - case 14647: - case 29400: - case 32000: - clk = F384; - clk_div = SSCR0_SerClkDiv(12); - break; - } - - /* FMT setting should be moved away when other FMTs are added (FIXME) */ - l3_command(sa11xx_uda1341->uda1341, CMD_FORMAT, (void *)LSB16); - - l3_command(sa11xx_uda1341->uda1341, CMD_FS, (void *)clk); - Ser4SSCR0 = (Ser4SSCR0 & ~0xff00) + clk_div + SSCR0_SSE; - sa11xx_uda1341->samplerate = rate; -} - -/* }}} */ - -/* {{{ HW init and shutdown */ - -static void sa11xx_uda1341_audio_init(struct sa11xx_uda1341 *sa11xx_uda1341) -{ - unsigned long flags; - - /* Setup DMA stuff */ - sa11xx_uda1341->s[SNDRV_PCM_STREAM_PLAYBACK].id = "UDA1341 out"; - sa11xx_uda1341->s[SNDRV_PCM_STREAM_PLAYBACK].stream_id = SNDRV_PCM_STREAM_PLAYBACK; - sa11xx_uda1341->s[SNDRV_PCM_STREAM_PLAYBACK].dma_dev = DMA_Ser4SSPWr; - - sa11xx_uda1341->s[SNDRV_PCM_STREAM_CAPTURE].id = "UDA1341 in"; - sa11xx_uda1341->s[SNDRV_PCM_STREAM_CAPTURE].stream_id = SNDRV_PCM_STREAM_CAPTURE; - sa11xx_uda1341->s[SNDRV_PCM_STREAM_CAPTURE].dma_dev = DMA_Ser4SSPRd; - - /* Initialize the UDA1341 internal state */ - - /* Setup the uarts */ - local_irq_save(flags); - GAFR |= (GPIO_SSP_CLK); - GPDR &= ~(GPIO_SSP_CLK); - Ser4SSCR0 = 0; - Ser4SSCR0 = SSCR0_DataSize(16) + SSCR0_TI + SSCR0_SerClkDiv(8); - Ser4SSCR1 = SSCR1_SClkIactL + SSCR1_SClk1P + SSCR1_ExtClk; - Ser4SSCR0 |= SSCR0_SSE; - local_irq_restore(flags); - - /* Enable the audio power */ - - clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_CODEC_NRESET); - set_sa11xx_uda1341_egpio(IPAQ_EGPIO_AUDIO_ON); - set_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE); - - /* Wait for the UDA1341 to wake up */ - mdelay(1); //FIXME - was removed by Perex - Why? - - /* Initialize the UDA1341 internal state */ - l3_open(sa11xx_uda1341->uda1341); - - /* external clock configuration (after l3_open - regs must be initialized */ - sa11xx_uda1341_set_samplerate(sa11xx_uda1341, sa11xx_uda1341->samplerate); - - /* Wait for the UDA1341 to wake up */ - set_sa11xx_uda1341_egpio(IPAQ_EGPIO_CODEC_NRESET); - mdelay(1); - - /* make the left and right channels unswapped (flip the WS latch) */ - Ser4SSDR = 0; - - clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE); -} - -static void sa11xx_uda1341_audio_shutdown(struct sa11xx_uda1341 *sa11xx_uda1341) -{ - /* mute on */ - set_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE); - - /* disable the audio power and all signals leading to the audio chip */ - l3_close(sa11xx_uda1341->uda1341); - Ser4SSCR0 = 0; - clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_CODEC_NRESET); - - /* power off and mute off */ - /* FIXME - is muting off necesary??? */ - - clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_AUDIO_ON); - clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE); -} - -/* }}} */ - -/* {{{ DMA staff */ - -/* - * these are the address and sizes used to fill the xmit buffer - * so we can get a clock in record only mode - */ -#define FORCE_CLOCK_ADDR (dma_addr_t)FLUSH_BASE_PHYS -#define FORCE_CLOCK_SIZE 4096 // was 2048 - -// FIXME Why this value exactly - wrote comment -#define DMA_BUF_SIZE 8176 /* <= MAX_DMA_SIZE from asm/arch-sa1100/dma.h */ - -#ifdef HH_VERSION - -static int audio_dma_request(struct audio_stream *s, void (*callback)(void *, int)) -{ - int ret; - - ret = sa1100_request_dma(&s->dmach, s->id, s->dma_dev); - if (ret < 0) { - printk(KERN_ERR "unable to grab audio dma 0x%x\n", s->dma_dev); - return ret; - } - sa1100_dma_set_callback(s->dmach, callback); - return 0; -} - -static inline void audio_dma_free(struct audio_stream *s) -{ - sa1100_free_dma(s->dmach); - s->dmach = -1; -} - -#else - -static int audio_dma_request(struct audio_stream *s, void (*callback)(void *)) -{ - int ret; - - ret = sa1100_request_dma(s->dma_dev, s->id, callback, s, &s->dma_regs); - if (ret < 0) - printk(KERN_ERR "unable to grab audio dma 0x%x\n", s->dma_dev); - return ret; -} - -static void audio_dma_free(struct audio_stream *s) -{ - sa1100_free_dma(s->dma_regs); - s->dma_regs = 0; -} - -#endif - -static u_int audio_get_dma_pos(struct audio_stream *s) -{ - struct snd_pcm_substream *substream = s->stream; - struct snd_pcm_runtime *runtime = substream->runtime; - unsigned int offset; - unsigned long flags; - dma_addr_t addr; - - // this must be called w/ interrupts locked out see dma-sa1100.c in the kernel - spin_lock_irqsave(&s->dma_lock, flags); -#ifdef HH_VERSION - sa1100_dma_get_current(s->dmach, NULL, &addr); -#else - addr = sa1100_get_dma_pos((s)->dma_regs); -#endif - offset = addr - runtime->dma_addr; - spin_unlock_irqrestore(&s->dma_lock, flags); - - offset = bytes_to_frames(runtime,offset); - if (offset >= runtime->buffer_size) - offset = 0; - - return offset; -} - -/* - * this stops the dma and clears the dma ptrs - */ -static void audio_stop_dma(struct audio_stream *s) -{ - unsigned long flags; - - spin_lock_irqsave(&s->dma_lock, flags); - s->active = 0; - s->period = 0; - /* this stops the dma channel and clears the buffer ptrs */ -#ifdef HH_VERSION - sa1100_dma_flush_all(s->dmach); -#else - sa1100_clear_dma(s->dma_regs); -#endif - spin_unlock_irqrestore(&s->dma_lock, flags); -} - -static void audio_process_dma(struct audio_stream *s) -{ - struct snd_pcm_substream *substream = s->stream; - struct snd_pcm_runtime *runtime; - unsigned int dma_size; - unsigned int offset; - int ret; - - /* we are requested to process synchronization DMA transfer */ - if (s->tx_spin) { - if (snd_BUG_ON(s->stream_id != SNDRV_PCM_STREAM_PLAYBACK)) - return; - /* fill the xmit dma buffers and return */ -#ifdef HH_VERSION - sa1100_dma_set_spin(s->dmach, FORCE_CLOCK_ADDR, FORCE_CLOCK_SIZE); -#else - while (1) { - ret = sa1100_start_dma(s->dma_regs, FORCE_CLOCK_ADDR, FORCE_CLOCK_SIZE); - if (ret) - return; - } -#endif - return; - } - - /* must be set here - only valid for running streams, not for forced_clock dma fills */ - runtime = substream->runtime; - while (s->active && s->periods < runtime->periods) { - dma_size = frames_to_bytes(runtime, runtime->period_size); - if (s->old_offset) { - /* a little trick, we need resume from old position */ - offset = frames_to_bytes(runtime, s->old_offset - 1); - s->old_offset = 0; - s->periods = 0; - s->period = offset / dma_size; - offset %= dma_size; - dma_size = dma_size - offset; - if (!dma_size) - continue; /* special case */ - } else { - offset = dma_size * s->period; - snd_BUG_ON(dma_size > DMA_BUF_SIZE); - } -#ifdef HH_VERSION - ret = sa1100_dma_queue_buffer(s->dmach, s, runtime->dma_addr + offset, dma_size); - if (ret) - return; //FIXME -#else - ret = sa1100_start_dma((s)->dma_regs, runtime->dma_addr + offset, dma_size); - if (ret) { - printk(KERN_ERR "audio_process_dma: cannot queue DMA buffer (%i)\n", ret); - return; - } -#endif - - s->period++; - s->period %= runtime->periods; - s->periods++; - } -} - -#ifdef HH_VERSION -static void audio_dma_callback(void *data, int size) -#else -static void audio_dma_callback(void *data) -#endif -{ - struct audio_stream *s = data; - - /* - * If we are getting a callback for an active stream then we inform - * the PCM middle layer we've finished a period - */ - if (s->active) - snd_pcm_period_elapsed(s->stream); - - spin_lock(&s->dma_lock); - if (!s->tx_spin && s->periods > 0) - s->periods--; - audio_process_dma(s); - spin_unlock(&s->dma_lock); -} - -/* }}} */ - -/* {{{ PCM setting */ - -/* {{{ trigger & timer */ - -static int snd_sa11xx_uda1341_trigger(struct snd_pcm_substream *substream, int cmd) -{ - struct sa11xx_uda1341 *chip = snd_pcm_substream_chip(substream); - int stream_id = substream->pstr->stream; - struct audio_stream *s = &chip->s[stream_id]; - struct audio_stream *s1 = &chip->s[stream_id ^ 1]; - int err = 0; - - /* note local interrupts are already disabled in the midlevel code */ - spin_lock(&s->dma_lock); - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - /* now we need to make sure a record only stream has a clock */ - if (stream_id == SNDRV_PCM_STREAM_CAPTURE && !s1->active) { - /* we need to force fill the xmit DMA with zeros */ - s1->tx_spin = 1; - audio_process_dma(s1); - } - /* this case is when you were recording then you turn on a - * playback stream so we stop (also clears it) the dma first, - * clear the sync flag and then we let it turned on - */ - else { - s->tx_spin = 0; - } - - /* requested stream startup */ - s->active = 1; - audio_process_dma(s); - break; - case SNDRV_PCM_TRIGGER_STOP: - /* requested stream shutdown */ - audio_stop_dma(s); - - /* - * now we need to make sure a record only stream has a clock - * so if we're stopping a playback with an active capture - * we need to turn the 0 fill dma on for the xmit side - */ - if (stream_id == SNDRV_PCM_STREAM_PLAYBACK && s1->active) { - /* we need to force fill the xmit DMA with zeros */ - s->tx_spin = 1; - audio_process_dma(s); - } - /* - * we killed a capture only stream, so we should also kill - * the zero fill transmit - */ - else { - if (s1->tx_spin) { - s1->tx_spin = 0; - audio_stop_dma(s1); - } - } - - break; - case SNDRV_PCM_TRIGGER_SUSPEND: - s->active = 0; -#ifdef HH_VERSION - sa1100_dma_stop(s->dmach); -#else - //FIXME - DMA API -#endif - s->old_offset = audio_get_dma_pos(s) + 1; -#ifdef HH_VERSION - sa1100_dma_flush_all(s->dmach); -#else - //FIXME - DMA API -#endif - s->periods = 0; - break; - case SNDRV_PCM_TRIGGER_RESUME: - s->active = 1; - s->tx_spin = 0; - audio_process_dma(s); - if (stream_id == SNDRV_PCM_STREAM_CAPTURE && !s1->active) { - s1->tx_spin = 1; - audio_process_dma(s1); - } - break; - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: -#ifdef HH_VERSION - sa1100_dma_stop(s->dmach); -#else - //FIXME - DMA API -#endif - s->active = 0; - if (stream_id == SNDRV_PCM_STREAM_PLAYBACK) { - if (s1->active) { - s->tx_spin = 1; - s->old_offset = audio_get_dma_pos(s) + 1; -#ifdef HH_VERSION - sa1100_dma_flush_all(s->dmach); -#else - //FIXME - DMA API -#endif - audio_process_dma(s); - } - } else { - if (s1->tx_spin) { - s1->tx_spin = 0; -#ifdef HH_VERSION - sa1100_dma_flush_all(s1->dmach); -#else - //FIXME - DMA API -#endif - } - } - break; - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - s->active = 1; - if (s->old_offset) { - s->tx_spin = 0; - audio_process_dma(s); - break; - } - if (stream_id == SNDRV_PCM_STREAM_CAPTURE && !s1->active) { - s1->tx_spin = 1; - audio_process_dma(s1); - } -#ifdef HH_VERSION - sa1100_dma_resume(s->dmach); -#else - //FIXME - DMA API -#endif - break; - default: - err = -EINVAL; - break; - } - spin_unlock(&s->dma_lock); - return err; -} - -static int snd_sa11xx_uda1341_prepare(struct snd_pcm_substream *substream) -{ - struct sa11xx_uda1341 *chip = snd_pcm_substream_chip(substream); - struct snd_pcm_runtime *runtime = substream->runtime; - struct audio_stream *s = &chip->s[substream->pstr->stream]; - - /* set requested samplerate */ - sa11xx_uda1341_set_samplerate(chip, runtime->rate); - - /* set requestd format when available */ - /* set FMT here !!! FIXME */ - - s->period = 0; - s->periods = 0; - - return 0; -} - -static snd_pcm_uframes_t snd_sa11xx_uda1341_pointer(struct snd_pcm_substream *substream) -{ - struct sa11xx_uda1341 *chip = snd_pcm_substream_chip(substream); - return audio_get_dma_pos(&chip->s[substream->pstr->stream]); -} - -/* }}} */ - -static struct snd_pcm_hardware snd_sa11xx_uda1341_capture = -{ - .info = (SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME), - .formats = SNDRV_PCM_FMTBIT_S16_LE, - .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\ - SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |\ - SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\ - SNDRV_PCM_RATE_KNOT), - .rate_min = 8000, - .rate_max = 48000, - .channels_min = 2, - .channels_max = 2, - .buffer_bytes_max = 64*1024, - .period_bytes_min = 64, - .period_bytes_max = DMA_BUF_SIZE, - .periods_min = 2, - .periods_max = 255, - .fifo_size = 0, -}; - -static struct snd_pcm_hardware snd_sa11xx_uda1341_playback = -{ - .info = (SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME), - .formats = SNDRV_PCM_FMTBIT_S16_LE, - .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\ - SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |\ - SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\ - SNDRV_PCM_RATE_KNOT), - .rate_min = 8000, - .rate_max = 48000, - .channels_min = 2, - .channels_max = 2, - .buffer_bytes_max = 64*1024, - .period_bytes_min = 64, - .period_bytes_max = DMA_BUF_SIZE, - .periods_min = 2, - .periods_max = 255, - .fifo_size = 0, -}; - -static int snd_card_sa11xx_uda1341_open(struct snd_pcm_substream *substream) -{ - struct sa11xx_uda1341 *chip = snd_pcm_substream_chip(substream); - struct snd_pcm_runtime *runtime = substream->runtime; - int stream_id = substream->pstr->stream; - int err; - - chip->s[stream_id].stream = substream; - - if (stream_id == SNDRV_PCM_STREAM_PLAYBACK) - runtime->hw = snd_sa11xx_uda1341_playback; - else - runtime->hw = snd_sa11xx_uda1341_capture; - if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0) - return err; - if ((err = snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &hw_constraints_rates)) < 0) - return err; - - return 0; -} - -static int snd_card_sa11xx_uda1341_close(struct snd_pcm_substream *substream) -{ - struct sa11xx_uda1341 *chip = snd_pcm_substream_chip(substream); - - chip->s[substream->pstr->stream].stream = NULL; - return 0; -} - -/* {{{ HW params & free */ - -static int snd_sa11xx_uda1341_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *hw_params) -{ - - return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params)); -} - -static int snd_sa11xx_uda1341_hw_free(struct snd_pcm_substream *substream) -{ - return snd_pcm_lib_free_pages(substream); -} - -/* }}} */ - -static struct snd_pcm_ops snd_card_sa11xx_uda1341_playback_ops = { - .open = snd_card_sa11xx_uda1341_open, - .close = snd_card_sa11xx_uda1341_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = snd_sa11xx_uda1341_hw_params, - .hw_free = snd_sa11xx_uda1341_hw_free, - .prepare = snd_sa11xx_uda1341_prepare, - .trigger = snd_sa11xx_uda1341_trigger, - .pointer = snd_sa11xx_uda1341_pointer, -}; - -static struct snd_pcm_ops snd_card_sa11xx_uda1341_capture_ops = { - .open = snd_card_sa11xx_uda1341_open, - .close = snd_card_sa11xx_uda1341_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = snd_sa11xx_uda1341_hw_params, - .hw_free = snd_sa11xx_uda1341_hw_free, - .prepare = snd_sa11xx_uda1341_prepare, - .trigger = snd_sa11xx_uda1341_trigger, - .pointer = snd_sa11xx_uda1341_pointer, -}; - -static int __init snd_card_sa11xx_uda1341_pcm(struct sa11xx_uda1341 *sa11xx_uda1341, int device) -{ - struct snd_pcm *pcm; - int err; - - if ((err = snd_pcm_new(sa11xx_uda1341->card, "UDA1341 PCM", device, 1, 1, &pcm)) < 0) - return err; - - /* - * this sets up our initial buffers and sets the dma_type to isa. - * isa works but I'm not sure why (or if) it's the right choice - * this may be too large, trying it for now - */ - snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, - snd_dma_isa_data(), - 64*1024, 64*1024); - - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_card_sa11xx_uda1341_playback_ops); - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_card_sa11xx_uda1341_capture_ops); - pcm->private_data = sa11xx_uda1341; - pcm->info_flags = 0; - strcpy(pcm->name, "UDA1341 PCM"); - - sa11xx_uda1341_audio_init(sa11xx_uda1341); - - /* setup DMA controller */ - audio_dma_request(&sa11xx_uda1341->s[SNDRV_PCM_STREAM_PLAYBACK], audio_dma_callback); - audio_dma_request(&sa11xx_uda1341->s[SNDRV_PCM_STREAM_CAPTURE], audio_dma_callback); - - sa11xx_uda1341->pcm = pcm; - - return 0; -} - -/* }}} */ - -/* {{{ module init & exit */ - -#ifdef CONFIG_PM - -static int snd_sa11xx_uda1341_suspend(struct platform_device *devptr, - pm_message_t state) -{ - struct snd_card *card = platform_get_drvdata(devptr); - struct sa11xx_uda1341 *chip = card->private_data; - - snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); - snd_pcm_suspend_all(chip->pcm); -#ifdef HH_VERSION - sa1100_dma_sleep(chip->s[SNDRV_PCM_STREAM_PLAYBACK].dmach); - sa1100_dma_sleep(chip->s[SNDRV_PCM_STREAM_CAPTURE].dmach); -#else - //FIXME -#endif - l3_command(chip->uda1341, CMD_SUSPEND, NULL); - sa11xx_uda1341_audio_shutdown(chip); - - return 0; -} - -static int snd_sa11xx_uda1341_resume(struct platform_device *devptr) -{ - struct snd_card *card = platform_get_drvdata(devptr); - struct sa11xx_uda1341 *chip = card->private_data; - - sa11xx_uda1341_audio_init(chip); - l3_command(chip->uda1341, CMD_RESUME, NULL); -#ifdef HH_VERSION - sa1100_dma_wakeup(chip->s[SNDRV_PCM_STREAM_PLAYBACK].dmach); - sa1100_dma_wakeup(chip->s[SNDRV_PCM_STREAM_CAPTURE].dmach); -#else - //FIXME -#endif - snd_power_change_state(card, SNDRV_CTL_POWER_D0); - return 0; -} -#endif /* COMFIG_PM */ - -void snd_sa11xx_uda1341_free(struct snd_card *card) -{ - struct sa11xx_uda1341 *chip = card->private_data; - - audio_dma_free(&chip->s[SNDRV_PCM_STREAM_PLAYBACK]); - audio_dma_free(&chip->s[SNDRV_PCM_STREAM_CAPTURE]); -} - -static int __devinit sa11xx_uda1341_probe(struct platform_device *devptr) -{ - int err; - struct snd_card *card; - struct sa11xx_uda1341 *chip; - - /* register the soundcard */ - err = snd_card_create(-1, id, THIS_MODULE, - sizeof(struct sa11xx_uda1341), &card); - if (err < 0) - return err; - - chip = card->private_data; - spin_lock_init(&chip->s[0].dma_lock); - spin_lock_init(&chip->s[1].dma_lock); - - card->private_free = snd_sa11xx_uda1341_free; - chip->card = card; - chip->samplerate = AUDIO_RATE_DEFAULT; - - // mixer - if ((err = snd_chip_uda1341_mixer_new(card, &chip->uda1341))) - goto nodev; - - // PCM - if ((err = snd_card_sa11xx_uda1341_pcm(chip, 0)) < 0) - goto nodev; - - strcpy(card->driver, "UDA1341"); - strcpy(card->shortname, "H3600 UDA1341TS"); - sprintf(card->longname, "Compaq iPAQ H3600 with Philips UDA1341TS"); - - snd_card_set_dev(card, &devptr->dev); - - if ((err = snd_card_register(card)) == 0) { - printk(KERN_INFO "iPAQ audio support initialized\n"); - platform_set_drvdata(devptr, card); - return 0; - } - - nodev: - snd_card_free(card); - return err; -} - -static int __devexit sa11xx_uda1341_remove(struct platform_device *devptr) -{ - snd_card_free(platform_get_drvdata(devptr)); - platform_set_drvdata(devptr, NULL); - return 0; -} - -#define SA11XX_UDA1341_DRIVER "sa11xx_uda1341" - -static struct platform_driver sa11xx_uda1341_driver = { - .probe = sa11xx_uda1341_probe, - .remove = __devexit_p(sa11xx_uda1341_remove), -#ifdef CONFIG_PM - .suspend = snd_sa11xx_uda1341_suspend, - .resume = snd_sa11xx_uda1341_resume, -#endif - .driver = { - .name = SA11XX_UDA1341_DRIVER, - }, -}; - -static int __init sa11xx_uda1341_init(void) -{ - int err; - - if (!machine_is_h3xxx()) - return -ENODEV; - if ((err = platform_driver_register(&sa11xx_uda1341_driver)) < 0) - return err; - device = platform_device_register_simple(SA11XX_UDA1341_DRIVER, -1, NULL, 0); - if (!IS_ERR(device)) { - if (platform_get_drvdata(device)) - return 0; - platform_device_unregister(device); - err = -ENODEV; - } else - err = PTR_ERR(device); - platform_driver_unregister(&sa11xx_uda1341_driver); - return err; -} - -static void __exit sa11xx_uda1341_exit(void) -{ - platform_device_unregister(device); - platform_driver_unregister(&sa11xx_uda1341_driver); -} - -module_init(sa11xx_uda1341_init); -module_exit(sa11xx_uda1341_exit); - -/* }}} */ - -/* - * Local variables: - * indent-tabs-mode: t - * End: - */ diff --git a/sound/i2c/Makefile b/sound/i2c/Makefile index 37970666a453..36879bf88700 100644 --- a/sound/i2c/Makefile +++ b/sound/i2c/Makefile @@ -7,8 +7,6 @@ snd-i2c-objs := i2c.o snd-cs8427-objs := cs8427.o snd-tea6330t-objs := tea6330t.o -obj-$(CONFIG_L3) += l3/ - obj-$(CONFIG_SND) += other/ # Toplevel Module Dependency diff --git a/sound/i2c/l3/Makefile b/sound/i2c/l3/Makefile deleted file mode 100644 index 49455b8dcc04..000000000000 --- a/sound/i2c/l3/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for ALSA -# - -snd-uda1341-objs := uda1341.o - -# Module Dependency -obj-$(CONFIG_SND_SA11XX_UDA1341) += snd-uda1341.o diff --git a/sound/i2c/l3/uda1341.c b/sound/i2c/l3/uda1341.c deleted file mode 100644 index 9840eb43648d..000000000000 --- a/sound/i2c/l3/uda1341.c +++ /dev/null @@ -1,935 +0,0 @@ -/* - * Philips UDA1341 mixer device driver - * Copyright (c) 2002 Tomas Kasparek - * - * Portions are Copyright (C) 2000 Lernout & Hauspie Speech Products, N.V. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License. - * - * History: - * - * 2002-03-13 Tomas Kasparek initial release - based on uda1341.c from OSS - * 2002-03-28 Tomas Kasparek basic mixer is working (volume, bass, treble) - * 2002-03-30 Tomas Kasparek proc filesystem support, complete mixer and DSP - * features support - * 2002-04-12 Tomas Kasparek proc interface update, code cleanup - * 2002-05-12 Tomas Kasparek another code cleanup - */ - -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include -#include - -#include - -#include - -/* {{{ HW regs definition */ - -#define STAT0 0x00 -#define STAT1 0x80 -#define STAT_MASK 0x80 - -#define DATA0_0 0x00 -#define DATA0_1 0x40 -#define DATA0_2 0x80 -#define DATA_MASK 0xc0 - -#define IS_DATA0(x) ((x) >= data0_0 && (x) <= data0_2) -#define IS_DATA1(x) ((x) == data1) -#define IS_STATUS(x) ((x) == stat0 || (x) == stat1) -#define IS_EXTEND(x) ((x) >= ext0 && (x) <= ext6) - -/* }}} */ - - -static const char *peak_names[] = { - "before", - "after", -}; - -static const char *filter_names[] = { - "flat", - "min", - "min", - "max", -}; - -static const char *mixer_names[] = { - "double differential", - "input channel 1 (line in)", - "input channel 2 (microphone)", - "digital mixer", -}; - -static const char *deemp_names[] = { - "none", - "32 kHz", - "44.1 kHz", - "48 kHz", -}; - -enum uda1341_regs_names { - stat0, - stat1, - data0_0, - data0_1, - data0_2, - data1, - ext0, - ext1, - ext2, - empty, - ext4, - ext5, - ext6, - uda1341_reg_last, -}; - -static const char *uda1341_reg_names[] = { - "stat 0 ", - "stat 1 ", - "data 00", - "data 01", - "data 02", - "data 1 ", - "ext 0", - "ext 1", - "ext 2", - "empty", - "ext 4", - "ext 5", - "ext 6", -}; - -static const int uda1341_enum_items[] = { - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 2, //peak - before/after - 4, //deemp - none/32/44.1/48 - 0, - 4, //filter - flat/min/min/max - 0, 0, 0, - 4, //mixer - differ/line/mic/mixer - 0, 0, 0, 0, 0, -}; - -static const char ** uda1341_enum_names[] = { - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - peak_names, //peak - before/after - deemp_names, //deemp - none/32/44.1/48 - NULL, - filter_names, //filter - flat/min/min/max - NULL, NULL, NULL, - mixer_names, //mixer - differ/line/mic/mixer - NULL, NULL, NULL, NULL, NULL, -}; - -typedef int uda1341_cfg[CMD_LAST]; - -struct uda1341 { - int (*write) (struct l3_client *uda1341, unsigned short reg, unsigned short val); - int (*read) (struct l3_client *uda1341, unsigned short reg); - unsigned char regs[uda1341_reg_last]; - int active; - spinlock_t reg_lock; - struct snd_card *card; - uda1341_cfg cfg; -#ifdef CONFIG_PM - unsigned char suspend_regs[uda1341_reg_last]; - uda1341_cfg suspend_cfg; -#endif -}; - -/* transfer 8bit integer into string with binary representation */ -static void int2str_bin8(uint8_t val, char *buf) -{ - const int size = sizeof(val) * 8; - int i; - - for (i= 0; i < size; i++){ - *(buf++) = (val >> (size - 1)) ? '1' : '0'; - val <<= 1; - } - *buf = '\0'; //end the string with zero -} - -/* {{{ HW manipulation routines */ - -static int snd_uda1341_codec_write(struct l3_client *clnt, unsigned short reg, unsigned short val) -{ - struct uda1341 *uda = clnt->driver_data; - unsigned char buf[2] = { 0xc0, 0xe0 }; // for EXT addressing - int err = 0; - - uda->regs[reg] = val; - - if (uda->active) { - if (IS_DATA0(reg)) { - err = l3_write(clnt, UDA1341_DATA0, (const unsigned char *)&val, 1); - } else if (IS_DATA1(reg)) { - err = l3_write(clnt, UDA1341_DATA1, (const unsigned char *)&val, 1); - } else if (IS_STATUS(reg)) { - err = l3_write(clnt, UDA1341_STATUS, (const unsigned char *)&val, 1); - } else if (IS_EXTEND(reg)) { - buf[0] |= (reg - ext0) & 0x7; //EXT address - buf[1] |= val; //EXT data - err = l3_write(clnt, UDA1341_DATA0, (const unsigned char *)buf, 2); - } - } else - printk(KERN_ERR "UDA1341 codec not active!\n"); - return err; -} - -static int snd_uda1341_codec_read(struct l3_client *clnt, unsigned short reg) -{ - unsigned char val; - int err; - - err = l3_read(clnt, reg, &val, 1); - if (err == 1) - // use just 6bits - the rest is address of the reg - return val & 63; - return err < 0 ? err : -EIO; -} - -static inline int snd_uda1341_valid_reg(struct l3_client *clnt, unsigned short reg) -{ - return reg < uda1341_reg_last; -} - -static int snd_uda1341_update_bits(struct l3_client *clnt, unsigned short reg, - unsigned short mask, unsigned short shift, - unsigned short value, int flush) -{ - int change; - unsigned short old, new; - struct uda1341 *uda = clnt->driver_data; - -#if 0 - printk(KERN_DEBUG "update_bits: reg: %s mask: %d shift: %d val: %d\n", - uda1341_reg_names[reg], mask, shift, value); -#endif - - if (!snd_uda1341_valid_reg(clnt, reg)) - return -EINVAL; - spin_lock(&uda->reg_lock); - old = uda->regs[reg]; - new = (old & ~(mask << shift)) | (value << shift); - change = old != new; - if (change) { - if (flush) uda->write(clnt, reg, new); - uda->regs[reg] = new; - } - spin_unlock(&uda->reg_lock); - return change; -} - -static int snd_uda1341_cfg_write(struct l3_client *clnt, unsigned short what, - unsigned short value, int flush) -{ - struct uda1341 *uda = clnt->driver_data; - int ret = 0; -#ifdef CONFIG_PM - int reg; -#endif - -#if 0 - printk(KERN_DEBUG "cfg_write what: %d value: %d\n", what, value); -#endif - - uda->cfg[what] = value; - - switch(what) { - case CMD_RESET: - ret = snd_uda1341_update_bits(clnt, data0_2, 1, 2, 1, flush); // MUTE - ret = snd_uda1341_update_bits(clnt, stat0, 1, 6, 1, flush); // RESET - ret = snd_uda1341_update_bits(clnt, stat0, 1, 6, 0, flush); // RESTORE - uda->cfg[CMD_RESET]=0; - break; - case CMD_FS: - ret = snd_uda1341_update_bits(clnt, stat0, 3, 4, value, flush); - break; - case CMD_FORMAT: - ret = snd_uda1341_update_bits(clnt, stat0, 7, 1, value, flush); - break; - case CMD_OGAIN: - ret = snd_uda1341_update_bits(clnt, stat1, 1, 6, value, flush); - break; - case CMD_IGAIN: - ret = snd_uda1341_update_bits(clnt, stat1, 1, 5, value, flush); - break; - case CMD_DAC: - ret = snd_uda1341_update_bits(clnt, stat1, 1, 0, value, flush); - break; - case CMD_ADC: - ret = snd_uda1341_update_bits(clnt, stat1, 1, 1, value, flush); - break; - case CMD_VOLUME: - ret = snd_uda1341_update_bits(clnt, data0_0, 63, 0, value, flush); - break; - case CMD_BASS: - ret = snd_uda1341_update_bits(clnt, data0_1, 15, 2, value, flush); - break; - case CMD_TREBBLE: - ret = snd_uda1341_update_bits(clnt, data0_1, 3, 0, value, flush); - break; - case CMD_PEAK: - ret = snd_uda1341_update_bits(clnt, data0_2, 1, 5, value, flush); - break; - case CMD_DEEMP: - ret = snd_uda1341_update_bits(clnt, data0_2, 3, 3, value, flush); - break; - case CMD_MUTE: - ret = snd_uda1341_update_bits(clnt, data0_2, 1, 2, value, flush); - break; - case CMD_FILTER: - ret = snd_uda1341_update_bits(clnt, data0_2, 3, 0, value, flush); - break; - case CMD_CH1: - ret = snd_uda1341_update_bits(clnt, ext0, 31, 0, value, flush); - break; - case CMD_CH2: - ret = snd_uda1341_update_bits(clnt, ext1, 31, 0, value, flush); - break; - case CMD_MIC: - ret = snd_uda1341_update_bits(clnt, ext2, 7, 2, value, flush); - break; - case CMD_MIXER: - ret = snd_uda1341_update_bits(clnt, ext2, 3, 0, value, flush); - break; - case CMD_AGC: - ret = snd_uda1341_update_bits(clnt, ext4, 1, 4, value, flush); - break; - case CMD_IG: - ret = snd_uda1341_update_bits(clnt, ext4, 3, 0, value & 0x3, flush); - ret = snd_uda1341_update_bits(clnt, ext5, 31, 0, value >> 2, flush); - break; - case CMD_AGC_TIME: - ret = snd_uda1341_update_bits(clnt, ext6, 7, 2, value, flush); - break; - case CMD_AGC_LEVEL: - ret = snd_uda1341_update_bits(clnt, ext6, 3, 0, value, flush); - break; -#ifdef CONFIG_PM - case CMD_SUSPEND: - for (reg = stat0; reg < uda1341_reg_last; reg++) - uda->suspend_regs[reg] = uda->regs[reg]; - for (reg = 0; reg < CMD_LAST; reg++) - uda->suspend_cfg[reg] = uda->cfg[reg]; - break; - case CMD_RESUME: - for (reg = stat0; reg < uda1341_reg_last; reg++) - snd_uda1341_codec_write(clnt, reg, uda->suspend_regs[reg]); - for (reg = 0; reg < CMD_LAST; reg++) - uda->cfg[reg] = uda->suspend_cfg[reg]; - break; -#endif - default: - ret = -EINVAL; - break; - } - - if (!uda->active) - printk(KERN_ERR "UDA1341 codec not active!\n"); - return ret; -} - -/* }}} */ - -/* {{{ Proc interface */ -#ifdef CONFIG_PROC_FS - -static const char *format_names[] = { - "I2S-bus", - "LSB 16bits", - "LSB 18bits", - "LSB 20bits", - "MSB", - "in LSB 16bits/out MSB", - "in LSB 18bits/out MSB", - "in LSB 20bits/out MSB", -}; - -static const char *fs_names[] = { - "512*fs", - "384*fs", - "256*fs", - "Unused - bad value!", -}; - -static const char* bass_values[][16] = { - {"0 dB", "0 dB", "0 dB", "0 dB", "0 dB", "0 dB", "0 dB", "0 dB", "0 dB", "0 dB", "0 dB", - "0 dB", "0 dB", "0 dB", "0 dB", "undefined", }, //flat - {"0 dB", "2 dB", "4 dB", "6 dB", "8 dB", "10 dB", "12 dB", "14 dB", "16 dB", "18 dB", "18 dB", - "18 dB", "18 dB", "18 dB", "18 dB", "undefined",}, // min - {"0 dB", "2 dB", "4 dB", "6 dB", "8 dB", "10 dB", "12 dB", "14 dB", "16 dB", "18 dB", "18 dB", - "18 dB", "18 dB", "18 dB", "18 dB", "undefined",}, // min - {"0 dB", "2 dB", "4 dB", "6 dB", "8 dB", "10 dB", "12 dB", "14 dB", "16 dB", "18 dB", "20 dB", - "22 dB", "24 dB", "24 dB", "24 dB", "undefined",}, // max -}; - -static const char *mic_sens_value[] = { - "-3 dB", "0 dB", "3 dB", "9 dB", "15 dB", "21 dB", "27 dB", "not used", -}; - -static const unsigned short AGC_atime[] = { - 11, 16, 11, 16, 21, 11, 16, 21, -}; - -static const unsigned short AGC_dtime[] = { - 100, 100, 200, 200, 200, 400, 400, 400, -}; - -static const char *AGC_level[] = { - "-9.0", "-11.5", "-15.0", "-17.5", -}; - -static const char *ig_small_value[] = { - "-3.0", "-2.5", "-2.0", "-1.5", "-1.0", "-0.5", -}; - -/* - * this was computed as peak_value[i] = pow((63-i)*1.42,1.013) - * - * UDA1341 datasheet on page 21: Peak value (dB) = (Peak level - 63.5)*5*log2 - * There is an table with these values [level]=value: [3]=-90.31, [7]=-84.29 - * [61]=-2.78, [62] = -1.48, [63] = 0.0 - * I tried to compute it, but using but even using logarithm with base either 10 or 2 - * i was'n able to get values in the table from the formula. So I constructed another - * formula (see above) to interpolate the values as good as possible. If there is some - * mistake, please contact me on tomas.kasparek@seznam.cz. Thanks. - * UDA1341TS datasheet is available at: - * http://www-us9.semiconductors.com/acrobat/datasheets/UDA1341TS_3.pdf - */ -static const char *peak_value[] = { - "-INF dB", "N.A.", "N.A", "90.31 dB", "N.A.", "N.A.", "N.A.", "-84.29 dB", - "-82.65 dB", "-81.13 dB", "-79.61 dB", "-78.09 dB", "-76.57 dB", "-75.05 dB", "-73.53 dB", - "-72.01 dB", "-70.49 dB", "-68.97 dB", "-67.45 dB", "-65.93 dB", "-64.41 dB", "-62.90 dB", - "-61.38 dB", "-59.86 dB", "-58.35 dB", "-56.83 dB", "-55.32 dB", "-53.80 dB", "-52.29 dB", - "-50.78 dB", "-49.26 dB", "-47.75 dB", "-46.24 dB", "-44.73 dB", "-43.22 dB", "-41.71 dB", - "-40.20 dB", "-38.69 dB", "-37.19 dB", "-35.68 dB", "-34.17 dB", "-32.67 dB", "-31.17 dB", - "-29.66 dB", "-28.16 dB", "-26.66 dB", "-25.16 dB", "-23.66 dB", "-22.16 dB", "-20.67 dB", - "-19.17 dB", "-17.68 dB", "-16.19 dB", "-14.70 dB", "-13.21 dB", "-11.72 dB", "-10.24 dB", - "-8.76 dB", "-7.28 dB", "-5.81 dB", "-4.34 dB", "-2.88 dB", "-1.43 dB", "0.00 dB", -}; - -static void snd_uda1341_proc_read(struct snd_info_entry *entry, - struct snd_info_buffer *buffer) -{ - struct l3_client *clnt = entry->private_data; - struct uda1341 *uda = clnt->driver_data; - int peak; - - peak = snd_uda1341_codec_read(clnt, UDA1341_DATA1); - if (peak < 0) - peak = 0; - - snd_iprintf(buffer, "%s\n\n", uda->card->longname); - - // for information about computed values see UDA1341TS datasheet pages 15 - 21 - snd_iprintf(buffer, "DAC power : %s\n", uda->cfg[CMD_DAC] ? "on" : "off"); - snd_iprintf(buffer, "ADC power : %s\n", uda->cfg[CMD_ADC] ? "on" : "off"); - snd_iprintf(buffer, "Clock frequency : %s\n", fs_names[uda->cfg[CMD_FS]]); - snd_iprintf(buffer, "Data format : %s\n\n", format_names[uda->cfg[CMD_FORMAT]]); - - snd_iprintf(buffer, "Filter mode : %s\n", filter_names[uda->cfg[CMD_FILTER]]); - snd_iprintf(buffer, "Mixer mode : %s\n", mixer_names[uda->cfg[CMD_MIXER]]); - snd_iprintf(buffer, "De-emphasis : %s\n", deemp_names[uda->cfg[CMD_DEEMP]]); - snd_iprintf(buffer, "Peak detection pos. : %s\n", uda->cfg[CMD_PEAK] ? "after" : "before"); - snd_iprintf(buffer, "Peak value : %s\n\n", peak_value[peak]); - - snd_iprintf(buffer, "Automatic Gain Ctrl : %s\n", uda->cfg[CMD_AGC] ? "on" : "off"); - snd_iprintf(buffer, "AGC attack time : %d ms\n", AGC_atime[uda->cfg[CMD_AGC_TIME]]); - snd_iprintf(buffer, "AGC decay time : %d ms\n", AGC_dtime[uda->cfg[CMD_AGC_TIME]]); - snd_iprintf(buffer, "AGC output level : %s dB\n\n", AGC_level[uda->cfg[CMD_AGC_LEVEL]]); - - snd_iprintf(buffer, "Mute : %s\n", uda->cfg[CMD_MUTE] ? "on" : "off"); - - if (uda->cfg[CMD_VOLUME] == 0) - snd_iprintf(buffer, "Volume : 0 dB\n"); - else if (uda->cfg[CMD_VOLUME] < 62) - snd_iprintf(buffer, "Volume : %d dB\n", -1*uda->cfg[CMD_VOLUME] +1); - else - snd_iprintf(buffer, "Volume : -INF dB\n"); - snd_iprintf(buffer, "Bass : %s\n", bass_values[uda->cfg[CMD_FILTER]][uda->cfg[CMD_BASS]]); - snd_iprintf(buffer, "Trebble : %d dB\n", uda->cfg[CMD_FILTER] ? 2*uda->cfg[CMD_TREBBLE] : 0); - snd_iprintf(buffer, "Input Gain (6dB) : %s\n", uda->cfg[CMD_IGAIN] ? "on" : "off"); - snd_iprintf(buffer, "Output Gain (6dB) : %s\n", uda->cfg[CMD_OGAIN] ? "on" : "off"); - snd_iprintf(buffer, "Mic sensitivity : %s\n", mic_sens_value[uda->cfg[CMD_MIC]]); - - - if(uda->cfg[CMD_CH1] < 31) - snd_iprintf(buffer, "Mixer gain channel 1: -%d.%c dB\n", - ((uda->cfg[CMD_CH1] >> 1) * 3) + (uda->cfg[CMD_CH1] & 1), - uda->cfg[CMD_CH1] & 1 ? '5' : '0'); - else - snd_iprintf(buffer, "Mixer gain channel 1: -INF dB\n"); - if(uda->cfg[CMD_CH2] < 31) - snd_iprintf(buffer, "Mixer gain channel 2: -%d.%c dB\n", - ((uda->cfg[CMD_CH2] >> 1) * 3) + (uda->cfg[CMD_CH2] & 1), - uda->cfg[CMD_CH2] & 1 ? '5' : '0'); - else - snd_iprintf(buffer, "Mixer gain channel 2: -INF dB\n"); - - if(uda->cfg[CMD_IG] > 5) - snd_iprintf(buffer, "Input Amp. Gain ch 2: %d.%c dB\n", - (uda->cfg[CMD_IG] >> 1) -3, uda->cfg[CMD_IG] & 1 ? '5' : '0'); - else - snd_iprintf(buffer, "Input Amp. Gain ch 2: %s dB\n", ig_small_value[uda->cfg[CMD_IG]]); -} - -static void snd_uda1341_proc_regs_read(struct snd_info_entry *entry, - struct snd_info_buffer *buffer) -{ - struct l3_client *clnt = entry->private_data; - struct uda1341 *uda = clnt->driver_data; - int reg; - char buf[12]; - - for (reg = 0; reg < uda1341_reg_last; reg ++) { - if (reg == empty) - continue; - int2str_bin8(uda->regs[reg], buf); - snd_iprintf(buffer, "%s = %s\n", uda1341_reg_names[reg], buf); - } - - int2str_bin8(snd_uda1341_codec_read(clnt, UDA1341_DATA1), buf); - snd_iprintf(buffer, "DATA1 = %s\n", buf); -} -#endif /* CONFIG_PROC_FS */ - -static void __devinit snd_uda1341_proc_init(struct snd_card *card, struct l3_client *clnt) -{ - struct snd_info_entry *entry; - - if (! snd_card_proc_new(card, "uda1341", &entry)) - snd_info_set_text_ops(entry, clnt, snd_uda1341_proc_read); - if (! snd_card_proc_new(card, "uda1341-regs", &entry)) - snd_info_set_text_ops(entry, clnt, snd_uda1341_proc_regs_read); -} - -/* }}} */ - -/* {{{ Mixer controls setting */ - -/* {{{ UDA1341 single functions */ - -#define UDA1341_SINGLE(xname, where, reg, shift, mask, invert) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .info = snd_uda1341_info_single, \ - .get = snd_uda1341_get_single, .put = snd_uda1341_put_single, \ - .private_value = where | (reg << 5) | (shift << 9) | (mask << 12) | (invert << 18) \ -} - -static int snd_uda1341_info_single(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_info *uinfo) -{ - int mask = (kcontrol->private_value >> 12) & 63; - - uinfo->type = mask == 1 ? SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER; - uinfo->count = 1; - uinfo->value.integer.min = 0; - uinfo->value.integer.max = mask; - return 0; -} - -static int snd_uda1341_get_single(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct l3_client *clnt = snd_kcontrol_chip(kcontrol); - struct uda1341 *uda = clnt->driver_data; - int where = kcontrol->private_value & 31; - int mask = (kcontrol->private_value >> 12) & 63; - int invert = (kcontrol->private_value >> 18) & 1; - - ucontrol->value.integer.value[0] = uda->cfg[where]; - if (invert) - ucontrol->value.integer.value[0] = mask - ucontrol->value.integer.value[0]; - - return 0; -} - -static int snd_uda1341_put_single(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct l3_client *clnt = snd_kcontrol_chip(kcontrol); - struct uda1341 *uda = clnt->driver_data; - int where = kcontrol->private_value & 31; - int reg = (kcontrol->private_value >> 5) & 15; - int shift = (kcontrol->private_value >> 9) & 7; - int mask = (kcontrol->private_value >> 12) & 63; - int invert = (kcontrol->private_value >> 18) & 1; - unsigned short val; - - val = (ucontrol->value.integer.value[0] & mask); - if (invert) - val = mask - val; - - uda->cfg[where] = val; - return snd_uda1341_update_bits(clnt, reg, mask, shift, val, FLUSH); -} - -/* }}} */ - -/* {{{ UDA1341 enum functions */ - -#define UDA1341_ENUM(xname, where, reg, shift, mask, invert) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .info = snd_uda1341_info_enum, \ - .get = snd_uda1341_get_enum, .put = snd_uda1341_put_enum, \ - .private_value = where | (reg << 5) | (shift << 9) | (mask << 12) | (invert << 18) \ -} - -static int snd_uda1341_info_enum(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_info *uinfo) -{ - int where = kcontrol->private_value & 31; - const char **texts; - - // this register we don't handle this way - if (!uda1341_enum_items[where]) - return -EINVAL; - - uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; - uinfo->count = 1; - uinfo->value.enumerated.items = uda1341_enum_items[where]; - - if (uinfo->value.enumerated.item >= uda1341_enum_items[where]) - uinfo->value.enumerated.item = uda1341_enum_items[where] - 1; - - texts = uda1341_enum_names[where]; - strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); - return 0; -} - -static int snd_uda1341_get_enum(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct l3_client *clnt = snd_kcontrol_chip(kcontrol); - struct uda1341 *uda = clnt->driver_data; - int where = kcontrol->private_value & 31; - - ucontrol->value.enumerated.item[0] = uda->cfg[where]; - return 0; -} - -static int snd_uda1341_put_enum(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct l3_client *clnt = snd_kcontrol_chip(kcontrol); - struct uda1341 *uda = clnt->driver_data; - int where = kcontrol->private_value & 31; - int reg = (kcontrol->private_value >> 5) & 15; - int shift = (kcontrol->private_value >> 9) & 7; - int mask = (kcontrol->private_value >> 12) & 63; - - uda->cfg[where] = (ucontrol->value.enumerated.item[0] & mask); - - return snd_uda1341_update_bits(clnt, reg, mask, shift, uda->cfg[where], FLUSH); -} - -/* }}} */ - -/* {{{ UDA1341 2regs functions */ - -#define UDA1341_2REGS(xname, where, reg_1, reg_2, shift_1, shift_2, mask_1, mask_2, invert) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), .info = snd_uda1341_info_2regs, \ - .get = snd_uda1341_get_2regs, .put = snd_uda1341_put_2regs, \ - .private_value = where | (reg_1 << 5) | (reg_2 << 9) | (shift_1 << 13) | (shift_2 << 16) | \ - (mask_1 << 19) | (mask_2 << 25) | (invert << 31) \ -} - - -static int snd_uda1341_info_2regs(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_info *uinfo) -{ - int mask_1 = (kcontrol->private_value >> 19) & 63; - int mask_2 = (kcontrol->private_value >> 25) & 63; - int mask; - - mask = (mask_2 + 1) * (mask_1 + 1) - 1; - uinfo->type = mask == 1 ? SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER; - uinfo->count = 1; - uinfo->value.integer.min = 0; - uinfo->value.integer.max = mask; - return 0; -} - -static int snd_uda1341_get_2regs(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct l3_client *clnt = snd_kcontrol_chip(kcontrol); - struct uda1341 *uda = clnt->driver_data; - int where = kcontrol->private_value & 31; - int mask_1 = (kcontrol->private_value >> 19) & 63; - int mask_2 = (kcontrol->private_value >> 25) & 63; - int invert = (kcontrol->private_value >> 31) & 1; - int mask; - - mask = (mask_2 + 1) * (mask_1 + 1) - 1; - - ucontrol->value.integer.value[0] = uda->cfg[where]; - if (invert) - ucontrol->value.integer.value[0] = mask - ucontrol->value.integer.value[0]; - return 0; -} - -static int snd_uda1341_put_2regs(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct l3_client *clnt = snd_kcontrol_chip(kcontrol); - struct uda1341 *uda = clnt->driver_data; - int where = kcontrol->private_value & 31; - int reg_1 = (kcontrol->private_value >> 5) & 15; - int reg_2 = (kcontrol->private_value >> 9) & 15; - int shift_1 = (kcontrol->private_value >> 13) & 7; - int shift_2 = (kcontrol->private_value >> 16) & 7; - int mask_1 = (kcontrol->private_value >> 19) & 63; - int mask_2 = (kcontrol->private_value >> 25) & 63; - int invert = (kcontrol->private_value >> 31) & 1; - int mask; - unsigned short val1, val2, val; - - val = ucontrol->value.integer.value[0]; - - mask = (mask_2 + 1) * (mask_1 + 1) - 1; - - val1 = val & mask_1; - val2 = (val / (mask_1 + 1)) & mask_2; - - if (invert) { - val1 = mask_1 - val1; - val2 = mask_2 - val2; - } - - uda->cfg[where] = invert ? mask - val : val; - - //FIXME - return value - snd_uda1341_update_bits(clnt, reg_1, mask_1, shift_1, val1, FLUSH); - return snd_uda1341_update_bits(clnt, reg_2, mask_2, shift_2, val2, FLUSH); -} - -/* }}} */ - -static struct snd_kcontrol_new snd_uda1341_controls[] = { - UDA1341_SINGLE("Master Playback Switch", CMD_MUTE, data0_2, 2, 1, 1), - UDA1341_SINGLE("Master Playback Volume", CMD_VOLUME, data0_0, 0, 63, 1), - - UDA1341_SINGLE("Bass Playback Volume", CMD_BASS, data0_1, 2, 15, 0), - UDA1341_SINGLE("Treble Playback Volume", CMD_TREBBLE, data0_1, 0, 3, 0), - - UDA1341_SINGLE("Input Gain Switch", CMD_IGAIN, stat1, 5, 1, 0), - UDA1341_SINGLE("Output Gain Switch", CMD_OGAIN, stat1, 6, 1, 0), - - UDA1341_SINGLE("Mixer Gain Channel 1 Volume", CMD_CH1, ext0, 0, 31, 1), - UDA1341_SINGLE("Mixer Gain Channel 2 Volume", CMD_CH2, ext1, 0, 31, 1), - - UDA1341_SINGLE("Mic Sensitivity Volume", CMD_MIC, ext2, 2, 7, 0), - - UDA1341_SINGLE("AGC Output Level", CMD_AGC_LEVEL, ext6, 0, 3, 0), - UDA1341_SINGLE("AGC Time Constant", CMD_AGC_TIME, ext6, 2, 7, 0), - UDA1341_SINGLE("AGC Time Constant Switch", CMD_AGC, ext4, 4, 1, 0), - - UDA1341_SINGLE("DAC Power", CMD_DAC, stat1, 0, 1, 0), - UDA1341_SINGLE("ADC Power", CMD_ADC, stat1, 1, 1, 0), - - UDA1341_ENUM("Peak detection", CMD_PEAK, data0_2, 5, 1, 0), - UDA1341_ENUM("De-emphasis", CMD_DEEMP, data0_2, 3, 3, 0), - UDA1341_ENUM("Mixer mode", CMD_MIXER, ext2, 0, 3, 0), - UDA1341_ENUM("Filter mode", CMD_FILTER, data0_2, 0, 3, 0), - - UDA1341_2REGS("Gain Input Amplifier Gain (channel 2)", CMD_IG, ext4, ext5, 0, 0, 3, 31, 0), -}; - -static void uda1341_free(struct l3_client *clnt) -{ - l3_detach_client(clnt); // calls kfree for driver_data (struct uda1341) - kfree(clnt); -} - -static int uda1341_dev_free(struct snd_device *device) -{ - struct l3_client *clnt = device->device_data; - uda1341_free(clnt); - return 0; -} - -int __init snd_chip_uda1341_mixer_new(struct snd_card *card, struct l3_client **clntp) -{ - static struct snd_device_ops ops = { - .dev_free = uda1341_dev_free, - }; - struct l3_client *clnt; - int idx, err; - - if (snd_BUG_ON(!card)) - return -EINVAL; - - clnt = kzalloc(sizeof(*clnt), GFP_KERNEL); - if (clnt == NULL) - return -ENOMEM; - - if ((err = l3_attach_client(clnt, "l3-bit-sa1100-gpio", UDA1341_ALSA_NAME))) { - kfree(clnt); - return err; - } - - for (idx = 0; idx < ARRAY_SIZE(snd_uda1341_controls); idx++) { - if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_uda1341_controls[idx], clnt))) < 0) { - uda1341_free(clnt); - return err; - } - } - - if ((err = snd_device_new(card, SNDRV_DEV_CODEC, clnt, &ops)) < 0) { - uda1341_free(clnt); - return err; - } - - *clntp = clnt; - strcpy(card->mixername, "UDA1341TS Mixer"); - ((struct uda1341 *)clnt->driver_data)->card = card; - - snd_uda1341_proc_init(card, clnt); - - return 0; -} - -/* }}} */ - -/* {{{ L3 operations */ - -static int uda1341_attach(struct l3_client *clnt) -{ - struct uda1341 *uda; - - uda = kzalloc(sizeof(*uda), 0, GFP_KERNEL); - if (!uda) - return -ENOMEM; - - /* init fixed parts of my copy of registers */ - uda->regs[stat0] = STAT0; - uda->regs[stat1] = STAT1; - - uda->regs[data0_0] = DATA0_0; - uda->regs[data0_1] = DATA0_1; - uda->regs[data0_2] = DATA0_2; - - uda->write = snd_uda1341_codec_write; - uda->read = snd_uda1341_codec_read; - - spin_lock_init(&uda->reg_lock); - - clnt->driver_data = uda; - return 0; -} - -static void uda1341_detach(struct l3_client *clnt) -{ - kfree(clnt->driver_data); -} - -static int -uda1341_command(struct l3_client *clnt, int cmd, void *arg) -{ - if (cmd != CMD_READ_REG) - return snd_uda1341_cfg_write(clnt, cmd, (int) arg, FLUSH); - - return snd_uda1341_codec_read(clnt, (int) arg); -} - -static int uda1341_open(struct l3_client *clnt) -{ - struct uda1341 *uda = clnt->driver_data; - - uda->active = 1; - - /* init default configuration */ - snd_uda1341_cfg_write(clnt, CMD_RESET, 0, REGS_ONLY); - snd_uda1341_cfg_write(clnt, CMD_FS, F256, FLUSH); // unknown state after reset - snd_uda1341_cfg_write(clnt, CMD_FORMAT, LSB16, FLUSH); // unknown state after reset - snd_uda1341_cfg_write(clnt, CMD_OGAIN, ON, FLUSH); // default off after reset - snd_uda1341_cfg_write(clnt, CMD_IGAIN, ON, FLUSH); // default off after reset - snd_uda1341_cfg_write(clnt, CMD_DAC, ON, FLUSH); // ??? default value after reset - snd_uda1341_cfg_write(clnt, CMD_ADC, ON, FLUSH); // ??? default value after reset - snd_uda1341_cfg_write(clnt, CMD_VOLUME, 20, FLUSH); // default 0dB after reset - snd_uda1341_cfg_write(clnt, CMD_BASS, 0, REGS_ONLY); // default value after reset - snd_uda1341_cfg_write(clnt, CMD_TREBBLE, 0, REGS_ONLY); // default value after reset - snd_uda1341_cfg_write(clnt, CMD_PEAK, AFTER, REGS_ONLY);// default value after reset - snd_uda1341_cfg_write(clnt, CMD_DEEMP, NONE, REGS_ONLY);// default value after reset - //at this moment should be QMUTED by h3600_audio_init - snd_uda1341_cfg_write(clnt, CMD_MUTE, OFF, REGS_ONLY); // default value after reset - snd_uda1341_cfg_write(clnt, CMD_FILTER, MAX, FLUSH); // defaul flat after reset - snd_uda1341_cfg_write(clnt, CMD_CH1, 31, FLUSH); // default value after reset - snd_uda1341_cfg_write(clnt, CMD_CH2, 4, FLUSH); // default value after reset - snd_uda1341_cfg_write(clnt, CMD_MIC, 4, FLUSH); // default 0dB after reset - snd_uda1341_cfg_write(clnt, CMD_MIXER, MIXER, FLUSH); // default doub.dif.mode - snd_uda1341_cfg_write(clnt, CMD_AGC, OFF, FLUSH); // default value after reset - snd_uda1341_cfg_write(clnt, CMD_IG, 0, FLUSH); // unknown state after reset - snd_uda1341_cfg_write(clnt, CMD_AGC_TIME, 0, FLUSH); // default value after reset - snd_uda1341_cfg_write(clnt, CMD_AGC_LEVEL, 0, FLUSH); // default value after reset - - return 0; -} - -static void uda1341_close(struct l3_client *clnt) -{ - struct uda1341 *uda = clnt->driver_data; - - uda->active = 0; -} - -/* }}} */ - -/* {{{ Module and L3 initialization */ - -static struct l3_ops uda1341_ops = { - .open = uda1341_open, - .command = uda1341_command, - .close = uda1341_close, -}; - -static struct l3_driver uda1341_driver = { - .name = UDA1341_ALSA_NAME, - .attach_client = uda1341_attach, - .detach_client = uda1341_detach, - .ops = &uda1341_ops, - .owner = THIS_MODULE, -}; - -static int __init uda1341_init(void) -{ - return l3_add_driver(&uda1341_driver); -} - -static void __exit uda1341_exit(void) -{ - l3_del_driver(&uda1341_driver); -} - -module_init(uda1341_init); -module_exit(uda1341_exit); - -MODULE_AUTHOR("Tomas Kasparek "); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Philips UDA1341 CODEC driver for ALSA"); -MODULE_SUPPORTED_DEVICE("{{UDA1341,UDA1341TS}}"); - -EXPORT_SYMBOL(snd_chip_uda1341_mixer_new); - -/* }}} */ - -/* - * Local variables: - * indent-tabs-mode: t - * End: - */