openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

regulator: Updates for v5.1 

The bulk of the standout changes in this release are cleanups, with the
 core work being a combination of factoring out common code into helpers
 and the completion of the conversion of the core to use GPIO
 descriptors.
 
  - Addition of helper functions for current limits and conversion of
    drivers to use them by Axel Lin.
  - Lots and lots of cleanups from Axel Lin.
  - Conversion of the core to use GPIO descriptors rather than numbers by
    Linus Walleij.
  - New drivers for Maxim MAX77650 and ROHM BD70528.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlx9UosTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0DR7B/4x2fjnrnlvDqwzr20jcWH0BTiOCN+s
 JpWNn2HxoeNNOn2w52bo0WNBvXElWj5+Lik8xljlj9DWXCgSdys0z5XEOpOmg3Eg
 +7AhyHmYBYf2igHWqw3dvL79n2MqdUY6mpbVtbf9kfJ3M5CwkwBUuXYNJLKZhLsm
 r06wIaEmCDT9mQNxl7r1tbDUpN8Rjg43W4dNFMYEUnZPpd9zhdwSnTRFxqhpF+K+
 GTli4yv3Z2IzZWGvG838/UBETffTfZv/lnuF7f/fagihGnhsp4RSp+3/PYvIV7/v
 BIvPUywSXQFiC/NqqtRBkqRKEGclv0itZzZy39hl+zp/k+Im2jzH0gkP
 =7lqn
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "The bulk of the standout changes in this release are cleanups, with
  the core work being a combination of factoring out common code into
  helpers and the completion of the conversion of the core to use GPIO
  descriptors.

  Summary:

   - Addition of helper functions for current limits and conversion of
     drivers to use them by Axel Lin.

   - Lots and lots of cleanups from Axel Lin.

   - Conversion of the core to use GPIO descriptors rather than numbers
     by Linus Walleij.

   - New drivers for Maxim MAX77650 and ROHM BD70528"

* tag 'regulator-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (131 commits)
  regulator: mc13xxx: Constify regulator_ops variables
  regulator: palmas: Constify palmas_smps_ramp_delay array
  regulator: wm831x-dcdc: Convert to use regulator_set/get_current_limit_regmap
  regulator: pv88090: Convert to use regulator_set/get_current_limit_regmap
  regulator: pv88080: Convert to use regulator_set/get_current_limit_regmap
  regulator: pv88060: Convert to use regulator_set/get_current_limit_regmap
  regulator: max77650: Convert to use regulator_set/get_current_limit_regmap
  regulator: lp873x: Convert to use regulator_set/get_current_limit_regmap
  regulator: lp872x: Convert to use regulator_set/get_current_limit_regmap
  regulator: da9210: Convert to use regulator_set/get_current_limit_regmap
  regulator: da9055: Convert to use regulator_set/get_current_limit_regmap
  regulator: core: Add set/get_current_limit helpers for regmap users
  regulator: Fix comment for csel_reg and csel_mask
  regulator: stm32-vrefbuf: add power management support
  regulator: 88pm8607: Remove unused fields from struct pm8607_regulator_info
  regulator: 88pm8607: Simplify pm8607_list_voltage implementation
  regulator: cpcap: Constify omap4_regulators and xoom_regulators
  regulator: cpcap: Remove unused vsel_shift from struct cpcap_regulator
  dt-bindings: regulator: tps65218: rectify units of LS3
  dt-bindings: regulator: add LS2 load switch documentation
  ...
This commit is contained in:
Linus Torvalds 2019-03-04 19:20:52 -08:00
parent e48b044e4f 88f268a5bc
commit 32c0ac3af4
94 changed files with 2499 additions and 1531 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
.mailmap
View File

@ -123,6 +123,7 @@ Mark Brown <broonie@sirena.org.uk>
Mark Yao <markyao0591@gmail.com> <mark.yao@rock-chips.com>
Martin Kepplinger <martink@posteo.de> <martin.kepplinger@theobroma-systems.com>
Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
Mathieu Othacehe <m.othacehe@gmail.com>
Matthew Wilcox <willy@infradead.org> <matthew.r.wilcox@intel.com>
Matthew Wilcox <willy@infradead.org> <matthew@wil.cx>
Matthew Wilcox <willy@infradead.org> <mawilcox@linuxonhyperv.com>

17
Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
View File

@ -23,6 +23,20 @@ Required properties:
Optional properties:
- clock-output-names : Should contain name for output clock.
- rohm,reset-snvs-powered : Transfer BD718x7 to SNVS state at reset.
The BD718x7 supports two different HW states as reset target states. States
are called as SNVS and READY. At READY state all the PMIC power outputs go
down and OTP is reload. At the SNVS state all other logic and external
devices apart from the SNVS power domain are shut off. Please refer to NXP
i.MX8 documentation for further information regarding SNVS state. When a
reset is done via SNVS state the PMIC OTP data is not reload. This causes
power outputs that have been under SW control to stay down when reset has
switched power state to SNVS. If reset is done via READY state the power
outputs will be returned to HW control by OTP loading. Thus the reset
target state is set to READY by default. If SNVS state is used the boot
crucial regulators must have the regulator-always-on and regulator-boot-on
properties set in regulator node.
Example:
@ -43,6 +57,7 @@ Example:
#clock-cells = <0>;
clocks = <&osc 0>;
clock-output-names = "bd71837-32k-out";
rohm,reset-snvs-powered;
regulators {
buck1: BUCK1 {
@ -50,8 +65,10 @@ Example:
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
};
// [...]
};
};

3
Documentation/devicetree/bindings/regulator/fan53555.txt
View File

@ -1,7 +1,8 @@
Binding for Fairchild FAN53555 regulators
Required properties:
- compatible: one of "fcs,fan53555", "silergy,syr827", "silergy,syr828"
- compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827" or
"silergy,syr828"
- reg: I2C address
Optional properties:

35
Documentation/devicetree/bindings/regulator/fixed-regulator.txt
View File

@ -1,35 +0,0 @@
Fixed Voltage regulators
Required properties:
- compatible: Must be "regulator-fixed";
- regulator-name: Defined in regulator.txt as optional, but required here.
Optional properties:
- gpio: gpio to use for enable control
- startup-delay-us: startup time in microseconds
- enable-active-high: Polarity of GPIO is Active high
If this property is missing, the default assumed is Active low.
- gpio-open-drain: GPIO is open drain type.
If this property is missing then default assumption is false.
-vin-supply: Input supply name.
Any property defined as part of the core regulator
binding, defined in regulator.txt, can also be used.
However a fixed voltage regulator is expected to have the
regulator-min-microvolt and regulator-max-microvolt
to be the same.
Example:
abc: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "fixed-supply";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio1 16 0>;
startup-delay-us = <70000>;
enable-active-high;
regulator-boot-on;
gpio-open-drain;
vin-supply = <&parent_reg>;
};

67
Documentation/devicetree/bindings/regulator/fixed-regulator.yaml Normal file
View File

@ -0,0 +1,67 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/regulator/fixed-regulator.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Fixed Voltage regulators
maintainers:
- Liam Girdwood <lgirdwood@gmail.com>
- Mark Brown <broonie@kernel.org>
description:
Any property defined as part of the core regulator binding, defined in
regulator.txt, can also be used. However a fixed voltage regulator is
expected to have the regulator-min-microvolt and regulator-max-microvolt
to be the same.
properties:
compatible:
const: regulator-fixed
regulator-name: true
gpio:
description: gpio to use for enable control
maxItems: 1
startup-delay-us:
description: startup time in microseconds
$ref: /schemas/types.yaml#/definitions/uint32
enable-active-high:
description:
Polarity of GPIO is Active high. If this property is missing,
the default assumed is Active low.
type: boolean
gpio-open-drain:
description:
GPIO is open drain type. If this property is missing then default
assumption is false.
type: boolean
vin-supply:
description: Input supply phandle.
$ref: /schemas/types.yaml#/definitions/phandle
required:
- compatible
- regulator-name
examples:
- |
reg_1v8: regulator-1v8 {
compatible = "regulator-fixed";
regulator-name = "1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio1 16 0>;
startup-delay-us = <70000>;
enable-active-high;
regulator-boot-on;
gpio-open-drain;
vin-supply = <&parent_reg>;
};
...

41
Documentation/devicetree/bindings/regulator/max77650-regulator.txt Normal file
View File

@ -0,0 +1,41 @@
Regulator driver for MAX77650 PMIC from Maxim Integrated.
This module is part of the MAX77650 MFD device. For more details
see Documentation/devicetree/bindings/mfd/max77650.txt.
The regulator controller is represented as a sub-node of the PMIC node
on the device tree.
The device has a single LDO regulator and a SIMO buck-boost regulator with
three independent power rails.
Required properties:
--------------------
- compatible: Must be "maxim,max77650-regulator"
Each rail must be instantiated under the regulators subnode of the top PMIC
node. Up to four regulators can be defined. For standard regulator properties
refer to Documentation/devicetree/bindings/regulator/regulator.txt.
Available regulator compatible strings are: "ldo", "sbb0", "sbb1", "sbb2".
Example:
--------
regulators {
compatible = "maxim,max77650-regulator";
max77650_ldo: regulator@0 {
regulator-compatible = "ldo";
regulator-name = "max77650-ldo";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <2937500>;
};
max77650_sbb0: regulator@1 {
regulator-compatible = "sbb0";
regulator-name = "max77650-sbb0";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1587500>;
};
};

2
Documentation/devicetree/bindings/regulator/pfuze100.txt
View File

@ -8,7 +8,7 @@ Optional properties:
- fsl,pfuze-support-disable-sw: Boolean, if present disable all unused switch
regulators to save power consumption. Attention, ensure that all important
regulators (e.g. DDR ref, DDR supply) has set the "regulator-always-on"
property. If not present, the switched regualtors are always on and can't be
property. If not present, the switched regulators are always on and can't be
disabled. This binding is a workaround to keep backward compatibility with
old dtb's which rely on the fact that the switched regulators are always on
and don't mark them explicit as "regulator-always-on".

68
Documentation/devicetree/bindings/regulator/rohm,bd70528-regulator.txt Normal file
View File

@ -0,0 +1,68 @@
ROHM BD70528 Power Management Integrated Circuit regulator bindings
Required properties:
- regulator-name: should be "buck1", "buck2", "buck3", "ldo1", "ldo2", "ldo3",
"led_ldo1", "led_ldo2"
List of regulators provided by this controller. BD70528 regulators node
should be sub node of the BD70528 MFD node. See BD70528 MFD bindings at
Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
The valid names for BD70528 regulator nodes are:
BUCK1, BUCK2, BUCK3, LDO1, LDO2, LDO3, LED_LDO1, LED_LDO2
Optional properties:
- Any optional property defined in bindings/regulator/regulator.txt
Example:
regulators {
buck1: BUCK1 {
regulator-name = "buck1";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-ramp-delay = <125>;
};
buck2: BUCK2 {
regulator-name = "buck2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-ramp-delay = <125>;
};
buck3: BUCK3 {
regulator-name = "buck3";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-ramp-delay = <250>;
};
ldo1: LDO1 {
regulator-name = "ldo1";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
ldo2: LDO2 {
regulator-name = "ldo2";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
ldo3: LDO3 {
regulator-name = "ldo3";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <3300000>;
};
led_ldo1: LED_LDO1 {
regulator-name = "led_ldo1";
regulator-min-microvolt = <200000>;
regulator-max-microvolt = <300000>;
};
led_ldo2: LED_LDO2 {
regulator-name = "led_ldo2";
regulator-min-microvolt = <200000>;
regulator-max-microvolt = <300000>;
};
};

38
Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
View File

@ -27,8 +27,38 @@ BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6
LDO1, LDO2, LDO3, LDO4, LDO5, LDO6
Optional properties:
- rohm,dvs-run-voltage : PMIC default "RUN" state voltage in uV.
See below table for bucks which support this.
- rohm,dvs-idle-voltage : PMIC default "IDLE" state voltage in uV.
See below table for bucks which support this.
- rohm,dvs-suspend-voltage : PMIC default "SUSPEND" state voltage in uV.
See below table for bucks which support this.
- Any optional property defined in bindings/regulator/regulator.txt
Supported default DVS states:
BD71837:
buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage
-----------------------------------------------------------------------------
1 | supported | supported | supported
----------------------------------------------------------------------------
2 | supported | supported | not supported
----------------------------------------------------------------------------
3 | supported | not supported | not supported
----------------------------------------------------------------------------
4 | supported | not supported | not supported
----------------------------------------------------------------------------
rest | not supported | not supported | not supported
BD71847:
buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage
-----------------------------------------------------------------------------
1 | supported | supported | supported
----------------------------------------------------------------------------
2 | supported | supported | not supported
----------------------------------------------------------------------------
rest | not supported | not supported | not supported
Example:
regulators {
buck1: BUCK1 {
@ -36,7 +66,11 @@ regulators {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
rohm,dvs-run-voltage = <900000>;
rohm,dvs-idle-voltage = <850000>;
rohm,dvs-suspend-voltage = <800000>;
};
buck2: BUCK2 {
regulator-name = "buck2";
@ -45,18 +79,22 @@ regulators {
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
rohm,dvs-run-voltage = <1000000>;
rohm,dvs-idle-voltage = <900000>;
};
buck3: BUCK3 {
regulator-name = "buck3";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
rohm,dvs-run-voltage = <1000000>;
};
buck4: BUCK4 {
regulator-name = "buck4";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
rohm,dvs-run-voltage = <1000000>;
};
buck5: BUCK5 {
regulator-name = "buck5";

6
Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
View File

@ -23,16 +23,14 @@ Switches are fixed voltage regulators with only enable/disable capability.
Optional properties:
- st,mask-reset: mask reset for this regulator: the regulator configuration
is maintained during pmic reset.
- regulator-pull-down: enable high pull down
if not specified light pull down is used
- regulator-over-current-protection:
if set, all regulators are switched off in case of over-current detection
on this regulator,
if not set, the driver only sends an over-current event.
- interrupt-parent: phandle to the parent interrupt controller
- interrupts: index of current limit detection interrupt
- <regulator>-supply: phandle to the parent supply/regulator node
each regulator supply can be described except vref_ddr.
- regulator-active-discharge: can be used on pwr_sw1 and pwr_sw2.
Example:
regulators {
@ -43,7 +41,6 @@ regulators {
vdd_core: buck1 {
regulator-name = "vdd_core";
interrupts = <IT_CURLIM_BUCK1 0>;
interrupt-parent = <&pmic>;
st,mask-reset;
regulator-pull-down;
regulator-min-microvolt = <700000>;
@ -53,7 +50,6 @@ regulators {
v3v3: buck4 {
regulator-name = "v3v3";
interrupts = <IT_CURLIM_BUCK4 0>;
interrupt-parent = <&mypmic>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;

9
Documentation/devicetree/bindings/regulator/tps65218.txt
View File

@ -71,8 +71,13 @@ tps65218: tps65218@24 {
regulator-always-on;
};
ls2: regulator-ls2 {
regulator-min-microamp = <100000>;
regulator-max-microamp = <1000000>;
};
ls3: regulator-ls3 {
regulator-min-microvolt = <100000>;
regulator-max-microvolt = <1000000>;
regulator-min-microamp = <100000>;
regulator-max-microamp = <1000000>;
};
};

1
arch/arm/mach-imx/mach-mx21ads.c
View File

@ -205,7 +205,6 @@ static struct regulator_init_data mx21ads_lcd_regulator_init_data = {
static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = {
.supply_name = "LCD",
.microvolts = 3300000,
.enable_high = 1,
.init_data = &mx21ads_lcd_regulator_init_data,
};

2
arch/arm/mach-imx/mach-mx27ads.c
View File

@ -237,7 +237,7 @@ static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = {
static struct gpiod_lookup_table mx27ads_lcd_regulator_gpiod_table = {
.dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */
.table = {
GPIO_LOOKUP("LCD", 0, NULL, GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("LCD", 0, NULL, GPIO_ACTIVE_LOW),
{ },
},
};

1
arch/arm/mach-mmp/brownstone.c
View File

@ -149,7 +149,6 @@ static struct regulator_init_data brownstone_v_5vp_data = {
static struct fixed_voltage_config brownstone_v_5vp = {
.supply_name = "v_5vp",
.microvolts = 5000000,
.enable_high = 1,
.enabled_at_boot = 1,
.init_data = &brownstone_v_5vp_data,
};

2
arch/arm/mach-omap1/board-ams-delta.c
View File

@ -267,7 +267,6 @@ static struct fixed_voltage_config modem_nreset_config = {
.supply_name = "modem_nreset",
.microvolts = 3300000,
.startup_delay = 25000,
.enable_high = 1,
.enabled_at_boot = 1,
.init_data = &modem_nreset_data,
};
@ -533,7 +532,6 @@ static struct regulator_init_data keybrd_pwr_initdata = {
static struct fixed_voltage_config keybrd_pwr_config = {
.supply_name = "keybrd_pwr",
.microvolts = 5000000,
.enable_high = 1,
.init_data = &keybrd_pwr_initdata,
};

1
arch/arm/mach-omap2/pdata-quirks.c
View File

@ -330,7 +330,6 @@ static struct fixed_voltage_config pandora_vwlan = {
.supply_name = "vwlan",
.microvolts = 1800000, /* 1.8V */
.startup_delay = 50000, /* 50ms */
.enable_high = 1,
.init_data = &pandora_vmmc3,
};

1
arch/arm/mach-pxa/em-x270.c
View File

@ -976,7 +976,6 @@ static struct fixed_voltage_config camera_dummy_config = {
.supply_name = "camera_vdd",
.input_supply = "vcc cam",
.microvolts = 2800000,
.enable_high = 0,
.init_data = &camera_dummy_initdata,
};

3
arch/arm/mach-pxa/ezx.c
View File

@ -714,7 +714,6 @@ static struct regulator_init_data camera_regulator_initdata = {
static struct fixed_voltage_config camera_regulator_config = {
.supply_name = "camera_vdd",
.microvolts = 2800000,
.enable_high = 0,
.init_data = &camera_regulator_initdata,
};
@ -730,7 +729,7 @@ static struct gpiod_lookup_table camera_supply_gpiod_table = {
.dev_id = "reg-fixed-voltage.1",
.table = {
GPIO_LOOKUP("gpio-pxa", GPIO50_nCAM_EN,
NULL, GPIO_ACTIVE_HIGH),
NULL, GPIO_ACTIVE_LOW),
{ },
},
};

23
arch/arm/mach-pxa/hx4700.c
View File

@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/gpio/machine.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
@ -702,9 +703,7 @@ static struct regulator_init_data bq24022_init_data = {
.consumer_supplies = bq24022_consumers,
};
static struct gpio bq24022_gpios[] = {
{ GPIO96_HX4700_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
};
static enum gpiod_flags bq24022_gpiod_gflags[] = { GPIOD_OUT_LOW };
static struct gpio_regulator_state bq24022_states[] = {
{ .value = 100000, .gpios = (0 << 0) },
@ -714,12 +713,10 @@ static struct gpio_regulator_state bq24022_states[] = {
static struct gpio_regulator_config bq24022_info = {
.supply_name = "bq24022",
.enable_gpio = GPIO72_HX4700_BQ24022_nCHARGE_EN,
.enable_high = 0,
.enabled_at_boot = 0,
.gpios = bq24022_gpios,
.nr_gpios = ARRAY_SIZE(bq24022_gpios),
.gflags = bq24022_gpiod_gflags,
.ngpios = ARRAY_SIZE(bq24022_gpiod_gflags),
.states = bq24022_states,
.nr_states = ARRAY_SIZE(bq24022_states),
@ -736,6 +733,17 @@ static struct platform_device bq24022 = {
},
};
static struct gpiod_lookup_table bq24022_gpiod_table = {
.dev_id = "gpio-regulator",
.table = {
GPIO_LOOKUP("gpio-pxa", GPIO96_HX4700_BQ24022_ISET2,
NULL, GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("gpio-pxa", GPIO72_HX4700_BQ24022_nCHARGE_EN,
"enable", GPIO_ACTIVE_LOW),
{ },
},
};
/*
* StrataFlash
*/
@ -878,6 +886,7 @@ static void __init hx4700_init(void)
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
gpiod_add_lookup_table(&bq24022_gpiod_table);
platform_add_devices(devices, ARRAY_SIZE(devices));
pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));

23
arch/arm/mach-pxa/magician.c
View File

@ -645,9 +645,8 @@ static struct regulator_init_data bq24022_init_data = {
.consumer_supplies = bq24022_consumers,
};
static struct gpio bq24022_gpios[] = {
{ EGPIO_MAGICIAN_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
};
static enum gpiod_flags bq24022_gpiod_gflags[] = { GPIOD_OUT_LOW };
static struct gpio_regulator_state bq24022_states[] = {
{ .value = 100000, .gpios = (0 << 0) },
@ -657,12 +656,10 @@ static struct gpio_regulator_state bq24022_states[] = {
static struct gpio_regulator_config bq24022_info = {
.supply_name = "bq24022",
.enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
.enable_high = 0,
.enabled_at_boot = 1,
.gpios = bq24022_gpios,
.nr_gpios = ARRAY_SIZE(bq24022_gpios),
.gflags = bq24022_gpiod_gflags,
.ngpios = ARRAY_SIZE(bq24022_gpiod_gflags),
.states = bq24022_states,
.nr_states = ARRAY_SIZE(bq24022_states),
@ -679,6 +676,17 @@ static struct platform_device bq24022 = {
},
};
static struct gpiod_lookup_table bq24022_gpiod_table = {
.dev_id = "gpio-regulator",
.table = {
GPIO_LOOKUP("gpio-pxa", EGPIO_MAGICIAN_BQ24022_ISET2,
NULL, GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("gpio-pxa", GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
"enable", GPIO_ACTIVE_LOW),
{ },
},
};
/*
* fixed regulator for ads7846
*/
@ -1027,6 +1035,7 @@ static void __init magician_init(void)
regulator_register_always_on(0, "power", pwm_backlight_supply,
ARRAY_SIZE(pwm_backlight_supply), 5000000);
gpiod_add_lookup_table(&bq24022_gpiod_table);
platform_add_devices(ARRAY_AND_SIZE(devices));
}

1
arch/arm/mach-pxa/raumfeld.c
View File

@ -883,7 +883,6 @@ static struct regulator_init_data audio_va_initdata = {
static struct fixed_voltage_config audio_va_config = {
.supply_name = "audio_va",
.microvolts = 5000000,
.enable_high = 1,
.enabled_at_boot = 0,
.init_data = &audio_va_initdata,
};

3
arch/arm/mach-pxa/zeus.c
View File

@ -426,7 +426,7 @@ static struct gpiod_lookup_table can_regulator_gpiod_table = {
.dev_id = "reg-fixed-voltage.0",
.table = {
GPIO_LOOKUP("gpio-pxa", ZEUS_CAN_SHDN_GPIO,
NULL, GPIO_ACTIVE_HIGH),
NULL, GPIO_ACTIVE_LOW),
{ },
},
};
@ -547,7 +547,6 @@ static struct regulator_init_data zeus_ohci_regulator_data = {
static struct fixed_voltage_config zeus_ohci_regulator_config = {
.supply_name = "vbus2",
.microvolts = 5000000, /* 5.0V */
.enable_high = 1,
.startup_delay = 0,
.init_data = &zeus_ohci_regulator_data,
};

1
arch/arm/mach-sa1100/assabet.c
View File

@ -469,7 +469,6 @@ static struct regulator_consumer_supply assabet_cf_vcc_consumers[] = {
static struct fixed_voltage_config assabet_cf_vcc_pdata __initdata = {
.supply_name = "cf-power",
.microvolts = 3300000,
.enable_high = 1,
};
static struct gpiod_lookup_table assabet_cf_vcc_gpio_table = {

2
arch/sh/boards/mach-ecovec24/setup.c
View File

@ -630,7 +630,6 @@ static struct regulator_init_data cn12_power_init_data = {
static struct fixed_voltage_config cn12_power_info = {
.supply_name = "CN12 SD/MMC Vdd",
.microvolts = 3300000,
.enable_high = 1,
.init_data = &cn12_power_init_data,
};
@ -671,7 +670,6 @@ static struct regulator_init_data sdhi0_power_init_data = {
static struct fixed_voltage_config sdhi0_power_info = {
.supply_name = "CN11 SD/MMC Vdd",
.microvolts = 3300000,
.enable_high = 1,
.init_data = &sdhi0_power_init_data,
};

1
arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c
View File

@ -44,7 +44,6 @@ static struct fixed_voltage_config bcm43xx_vmmc = {
*/
.microvolts = 2000000, /* 1.8V */
.startup_delay = 250 * 1000, /* 250ms */
.enable_high = 1, /* active high */
.enabled_at_boot = 0, /* disabled at boot */
.init_data = &bcm43xx_vmmc_data,
};

38
drivers/regulator/88pm8607.c
View File

@ -11,7 +11,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/of.h>
#include <linux/regulator/of_regulator.h>
#include <linux/platform_device.h>
@ -22,12 +21,7 @@
struct pm8607_regulator_info {
struct regulator_desc desc;
struct pm860x_chip *chip;
struct regulator_dev *regulator;
struct i2c_client *i2c;
struct i2c_client *i2c_8606;
unsigned int *vol_table;
unsigned int *vol_suspend;
int slope_double;
@ -210,13 +204,15 @@ static const unsigned int LDO14_suspend_table[] = {
static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index)
{
struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
int ret = -EINVAL;
int ret;
ret = regulator_list_voltage_table(rdev, index);
if (ret < 0)
return ret;
if (info->slope_double)
ret <<= 1;
if (info->vol_table && (index < rdev->desc->n_voltages)) {
ret = info->vol_table[index];
if (info->slope_double)
ret <<= 1;
}
return ret;
}
@ -257,6 +253,7 @@ static const struct regulator_ops pm8606_preg_ops = {
.type = REGULATOR_VOLTAGE, \
.id = PM8607_ID_##vreg, \
.owner = THIS_MODULE, \
.volt_table = vreg##_table, \
.n_voltages = ARRAY_SIZE(vreg##_table), \
.vsel_reg = PM8607_##vreg, \
.vsel_mask = ARRAY_SIZE(vreg##_table) - 1, \
@ -266,7 +263,6 @@ static const struct regulator_ops pm8606_preg_ops = {
.enable_mask = 1 << (ebit), \
}, \
.slope_double = (0), \
.vol_table = (unsigned int *)&vreg##_table, \
.vol_suspend = (unsigned int *)&vreg##_suspend_table, \
}
@ -278,6 +274,7 @@ static const struct regulator_ops pm8606_preg_ops = {
.type = REGULATOR_VOLTAGE, \
.id = PM8607_ID_LDO##_id, \
.owner = THIS_MODULE, \
.volt_table = LDO##_id##_table, \
.n_voltages = ARRAY_SIZE(LDO##_id##_table), \
.vsel_reg = PM8607_##vreg, \
.vsel_mask = (ARRAY_SIZE(LDO##_id##_table) - 1) << (shift), \
@ -285,7 +282,6 @@ static const struct regulator_ops pm8606_preg_ops = {
.enable_mask = 1 << (ebit), \
}, \
.slope_double = (0), \
.vol_table = (unsigned int *)&LDO##_id##_table, \
.vol_suspend = (unsigned int *)&LDO##_id##_suspend_table, \
}
@ -349,6 +345,7 @@ static int pm8607_regulator_probe(struct platform_device *pdev)
struct pm8607_regulator_info *info = NULL;
struct regulator_init_data *pdata = dev_get_platdata(&pdev->dev);
struct regulator_config config = { };
struct regulator_dev *rdev;
struct resource *res;
int i;
@ -371,13 +368,9 @@ static int pm8607_regulator_probe(struct platform_device *pdev)
/* i is used to check regulator ID */
i = -1;
}
info->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
info->i2c_8606 = (chip->id == CHIP_PM8607) ? chip->companion :
chip->client;
info->chip = chip;
/* check DVC ramp slope double */
if ((i == PM8607_ID_BUCK3) && info->chip->buck3_double)
if ((i == PM8607_ID_BUCK3) && chip->buck3_double)
info->slope_double = 1;
config.dev = &pdev->dev;
@ -392,12 +385,11 @@ static int pm8607_regulator_probe(struct platform_device *pdev)
else
config.regmap = chip->regmap_companion;
info->regulator = devm_regulator_register(&pdev->dev, &info->desc,
&config);
if (IS_ERR(info->regulator)) {
rdev = devm_regulator_register(&pdev->dev, &info->desc, &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "failed to register regulator %s\n",
info->desc.name);
return PTR_ERR(info->regulator);
return PTR_ERR(rdev);
}
platform_set_drvdata(pdev, info);

27
drivers/regulator/Kconfig
View File

@ -180,6 +180,17 @@ config REGULATOR_BCM590XX
BCM590xx PMUs. This will enable support for the software
controllable LDO/Switching regulators.
config REGULATOR_BD70528
tristate "ROHM BD70528 Power Regulator"
depends on MFD_ROHM_BD70528
help
This driver supports voltage regulators on ROHM BD70528 PMIC.
This will enable support for the software controllable buck
and LDO regulators.
This driver can also be built as a module. If so, the module
will be called bd70528-regulator.
config REGULATOR_BD718XX
tristate "ROHM BD71837 Power Regulator"
depends on MFD_ROHM_BD718XX
@ -457,6 +468,14 @@ config REGULATOR_MAX77620
chip to control Step-Down DC-DC and LDOs. Say Y here to
enable the regulator driver.
config REGULATOR_MAX77650
tristate "Maxim MAX77650/77651 regulator support"
depends on MFD_MAX77650
help
Regulator driver for MAX77650/77651 PMIC from Maxim
Semiconductor. This device has a SIMO with three independent
power rails and an LDO.
config REGULATOR_MAX8649
tristate "Maxim 8649 voltage regulator"
depends on I2C
@ -484,7 +503,7 @@ config REGULATOR_MAX8925
tristate "Maxim MAX8925 Power Management IC"
depends on MFD_MAX8925
help
Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
Say y here to support the voltage regulator of Maxim MAX8925 PMIC.
config REGULATOR_MAX8952
tristate "Maxim MAX8952 Power Management IC"
@ -501,7 +520,7 @@ config REGULATOR_MAX8973
select REGMAP_I2C
help
The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
switching regulator delievers up to 9A of output current. Each
switching regulator delivers up to 9A of output current. Each
phase operates at a 2MHz fixed frequency with a 120 deg shift
from the adjacent phase, allowing the use of small magnetic component.
@ -646,7 +665,7 @@ config REGULATOR_PCF50633
tristate "NXP PCF50633 regulator driver"
depends on MFD_PCF50633
help
Say Y here to support the voltage regulators and convertors
Say Y here to support the voltage regulators and converters
on PCF50633
config REGULATOR_PFUZE100
@ -924,7 +943,7 @@ config REGULATOR_TPS65132
select REGMAP_I2C
help
This driver supports TPS65132 single inductor - dual output
power supply specifcally designed for display panels.
power supply specifically designed for display panels.
config REGULATOR_TPS65217
tristate "TI TPS65217 Power regulators"

2
drivers/regulator/Makefile
View File

@ -27,6 +27,7 @@ obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
obj-$(CONFIG_REGULATOR_BD70528) += bd70528-regulator.o
obj-$(CONFIG_REGULATOR_BD718XX) += bd718x7-regulator.o
obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
@ -60,6 +61,7 @@ obj-$(CONFIG_REGULATOR_LTC3676) += ltc3676.o
obj-$(CONFIG_REGULATOR_MAX14577) += max14577-regulator.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
obj-$(CONFIG_REGULATOR_MAX77650) += max77650-regulator.o
obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o
obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
obj-$(CONFIG_REGULATOR_MAX8907) += max8907-regulator.o

5
drivers/regulator/act8865-regulator.c
View File

@ -131,7 +131,7 @@
* ACT8865 voltage number
*/
#define ACT8865_VOLTAGE_NUM 64
#define ACT8600_SUDCDC_VOLTAGE_NUM 255
#define ACT8600_SUDCDC_VOLTAGE_NUM 256
struct act8865 {
struct regmap *regmap;
@ -222,7 +222,8 @@ static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(3000000, 0, 63, 0),
REGULATOR_LINEAR_RANGE(3000000, 64, 159, 100000),
REGULATOR_LINEAR_RANGE(12600000, 160, 191, 200000),
REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000),
REGULATOR_LINEAR_RANGE(19000000, 192, 247, 400000),
REGULATOR_LINEAR_RANGE(41400000, 248, 255, 0),
};
static struct regulator_ops act8865_ops = {

11
drivers/regulator/act8945a-regulator.c
View File

@ -87,7 +87,8 @@ static const struct regulator_linear_range act8945a_voltage_ranges[] = {
static int act8945a_set_suspend_state(struct regulator_dev *rdev, bool enable)
{
struct regmap *regmap = rdev->regmap;
int id = rdev->desc->id, reg, val;
int id = rdev_get_id(rdev);
int reg, val;
switch (id) {
case ACT8945A_ID_DCDC1:
@ -159,7 +160,7 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev);
struct regmap *regmap = rdev->regmap;
int id = rdev->desc->id;
int id = rdev_get_id(rdev);
int reg, ret, val = 0;
switch (id) {
@ -190,11 +191,11 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode)
switch (mode) {
case REGULATOR_MODE_STANDBY:
if (rdev->desc->id > ACT8945A_ID_DCDC3)
if (id > ACT8945A_ID_DCDC3)
val = BIT(5);
break;
case REGULATOR_MODE_NORMAL:
if (rdev->desc->id <= ACT8945A_ID_DCDC3)
if (id <= ACT8945A_ID_DCDC3)
val = BIT(5);
break;
default:
@ -213,7 +214,7 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode)
static unsigned int act8945a_get_mode(struct regulator_dev *rdev)
{
struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev);
int id = rdev->desc->id;
int id = rdev_get_id(rdev);
if (id < ACT8945A_ID_DCDC1 || id >= ACT8945A_ID_MAX)
return -EINVAL;

56
drivers/regulator/arizona-ldo1.c
View File

@ -40,35 +40,10 @@ struct arizona_ldo1 {
struct gpio_desc *ena_gpiod;
};
static int arizona_ldo1_hc_list_voltage(struct regulator_dev *rdev,
unsigned int selector)
{
if (selector >= rdev->desc->n_voltages)
return -EINVAL;
if (selector == rdev->desc->n_voltages - 1)
return 1800000;
else
return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
}
static int arizona_ldo1_hc_map_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV)
{
int sel;
sel = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
if (sel >= rdev->desc->n_voltages)
sel = rdev->desc->n_voltages - 1;
return sel;
}
static int arizona_ldo1_hc_set_voltage_sel(struct regulator_dev *rdev,
unsigned sel)
{
struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
struct regmap *regmap = ldo->regmap;
struct regmap *regmap = rdev_get_regmap(rdev);
unsigned int val;
int ret;
@ -85,16 +60,12 @@ static int arizona_ldo1_hc_set_voltage_sel(struct regulator_dev *rdev,
if (val)
return 0;
val = sel << ARIZONA_LDO1_VSEL_SHIFT;
return regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_1,
ARIZONA_LDO1_VSEL_MASK, val);
return regulator_set_voltage_sel_regmap(rdev, sel);
}
static int arizona_ldo1_hc_get_voltage_sel(struct regulator_dev *rdev)
{
struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
struct regmap *regmap = ldo->regmap;
struct regmap *regmap = rdev_get_regmap(rdev);
unsigned int val;
int ret;
@ -105,32 +76,35 @@ static int arizona_ldo1_hc_get_voltage_sel(struct regulator_dev *rdev)
if (val & ARIZONA_LDO1_HI_PWR)
return rdev->desc->n_voltages - 1;
ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_1, &val);
if (ret != 0)
return ret;
return (val & ARIZONA_LDO1_VSEL_MASK) >> ARIZONA_LDO1_VSEL_SHIFT;
return regulator_get_voltage_sel_regmap(rdev);
}
static const struct regulator_ops arizona_ldo1_hc_ops = {
.list_voltage = arizona_ldo1_hc_list_voltage,
.map_voltage = arizona_ldo1_hc_map_voltage,
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = arizona_ldo1_hc_get_voltage_sel,
.set_voltage_sel = arizona_ldo1_hc_set_voltage_sel,
.get_bypass = regulator_get_bypass_regmap,
.set_bypass = regulator_set_bypass_regmap,
};
static const struct regulator_linear_range arizona_ldo1_hc_ranges[] = {
REGULATOR_LINEAR_RANGE(900000, 0, 0x6, 50000),
REGULATOR_LINEAR_RANGE(1800000, 0x7, 0x7, 0),
};
static const struct regulator_desc arizona_ldo1_hc = {
.name = "LDO1",
.supply_name = "LDOVDD",
.type = REGULATOR_VOLTAGE,
.ops = &arizona_ldo1_hc_ops,
.vsel_reg = ARIZONA_LDO1_CONTROL_1,
.vsel_mask = ARIZONA_LDO1_VSEL_MASK,
.bypass_reg = ARIZONA_LDO1_CONTROL_1,
.bypass_mask = ARIZONA_LDO1_BYPASS,
.min_uV = 900000,
.uV_step = 50000,
.linear_ranges = arizona_ldo1_hc_ranges,
.n_linear_ranges = ARRAY_SIZE(arizona_ldo1_hc_ranges),
.n_voltages = 8,
.enable_time = 1500,
.ramp_delay = 24000,

2
drivers/regulator/as3722-regulator.c
View File

@ -886,7 +886,7 @@ static int as3722_regulator_probe(struct platform_device *pdev)
as3722_regs->desc[id].min_uV = 410000;
} else {
as3722_regs->desc[id].n_voltages =
AS3722_SD0_VSEL_MAX + 1,
AS3722_SD0_VSEL_MAX + 1;
as3722_regs->desc[id].min_uV = 610000;
}
as3722_regs->desc[id].uV_step = 10000;

27
drivers/regulator/axp20x-regulator.c
View File

@ -367,13 +367,12 @@ static const int axp209_dcdc2_ldo3_slew_rates[] = {
static int axp20x_set_ramp_delay(struct regulator_dev *rdev, int ramp)
{
struct axp20x_dev *axp20x = rdev_get_drvdata(rdev);
const struct regulator_desc *desc = rdev->desc;
const struct regulator_desc *desc;
u8 reg, mask, enable, cfg = 0xff;
const int *slew_rates;
int rate_count = 0;
if (!rdev)
return -EINVAL;
desc = rdev->desc;
switch (axp20x->variant) {
case AXP209_ID:
@ -436,11 +435,13 @@ static int axp20x_set_ramp_delay(struct regulator_dev *rdev, int ramp)
static int axp20x_regulator_enable_regmap(struct regulator_dev *rdev)
{
struct axp20x_dev *axp20x = rdev_get_drvdata(rdev);
const struct regulator_desc *desc = rdev->desc;
const struct regulator_desc *desc;
if (!rdev)
return -EINVAL;
desc = rdev->desc;
switch (axp20x->variant) {
case AXP209_ID:
if ((desc->id == AXP20X_LDO3) &&
@ -573,7 +574,7 @@ static const struct regulator_desc axp22x_regulators[] = {
AXP22X_DCDC3_V_OUT, AXP22X_DCDC3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_DCDC3_MASK),
AXP_DESC(AXP22X, DCDC4, "dcdc4", "vin4", 600, 1540, 20,
AXP22X_DCDC4_V_OUT, AXP22X_DCDC4_V_OUT,
AXP22X_DCDC4_V_OUT, AXP22X_DCDC4_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_DCDC4_MASK),
AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50,
AXP22X_DCDC5_V_OUT, AXP22X_DCDC5_V_OUT_MASK,
@ -719,7 +720,7 @@ static const struct regulator_desc axp803_regulators[] = {
AXP22X_ALDO1_V_OUT, AXP22X_ALDO1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL3, AXP806_PWR_OUT_ALDO1_MASK),
AXP_DESC(AXP803, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
AXP22X_ALDO2_V_OUT, AXP22X_ALDO2_V_OUT,
AXP22X_ALDO2_V_OUT, AXP22X_ALDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL3, AXP806_PWR_OUT_ALDO2_MASK),
AXP_DESC(AXP803, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
AXP22X_ALDO3_V_OUT, AXP22X_ALDO3_V_OUT_MASK,
@ -729,7 +730,7 @@ static const struct regulator_desc axp803_regulators[] = {
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO1_MASK),
AXP_DESC_RANGES(AXP803, DLDO2, "dldo2", "dldoin",
axp803_dldo2_ranges, AXP803_DLDO2_NUM_VOLTAGES,
AXP22X_DLDO2_V_OUT, AXP22X_DLDO2_V_OUT,
AXP22X_DLDO2_V_OUT, AXP22X_DLDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO2_MASK),
AXP_DESC(AXP803, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
AXP22X_DLDO3_V_OUT, AXP22X_DLDO3_V_OUT_MASK,
@ -744,7 +745,7 @@ static const struct regulator_desc axp803_regulators[] = {
AXP22X_ELDO2_V_OUT, AXP22X_ELDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO2_MASK),
AXP_DESC(AXP803, ELDO3, "eldo3", "eldoin", 700, 1900, 50,
AXP22X_ELDO3_V_OUT, AXP22X_ELDO3_V_OUT,
AXP22X_ELDO3_V_OUT, AXP22X_ELDO3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO3_MASK),
AXP_DESC(AXP803, FLDO1, "fldo1", "fldoin", 700, 1450, 50,
AXP803_FLDO1_V_OUT, AXP803_FLDO1_V_OUT_MASK,
@ -791,7 +792,7 @@ static const struct regulator_desc axp806_regulators[] = {
AXP806_DCDCA_V_CTRL, AXP806_DCDCA_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL1, AXP806_PWR_OUT_DCDCA_MASK),
AXP_DESC(AXP806, DCDCB, "dcdcb", "vinb", 1000, 2550, 50,
AXP806_DCDCB_V_CTRL, AXP806_DCDCB_V_CTRL,
AXP806_DCDCB_V_CTRL, AXP806_DCDCB_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL1, AXP806_PWR_OUT_DCDCB_MASK),
AXP_DESC_RANGES(AXP806, DCDCC, "dcdcc", "vinc",
axp806_dcdca_ranges, AXP806_DCDCA_NUM_VOLTAGES,
@ -817,7 +818,7 @@ static const struct regulator_desc axp806_regulators[] = {
AXP806_BLDO1_V_CTRL, AXP806_BLDO1_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL2, AXP806_PWR_OUT_BLDO1_MASK),
AXP_DESC(AXP806, BLDO2, "bldo2", "bldoin", 700, 1900, 100,
AXP806_BLDO2_V_CTRL, AXP806_BLDO2_V_CTRL,
AXP806_BLDO2_V_CTRL, AXP806_BLDO2_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL2, AXP806_PWR_OUT_BLDO2_MASK),
AXP_DESC(AXP806, BLDO3, "bldo3", "bldoin", 700, 1900, 100,
AXP806_BLDO3_V_CTRL, AXP806_BLDO3_V_CTRL_MASK,
@ -952,7 +953,7 @@ static const struct regulator_desc axp813_regulators[] = {
AXP22X_ALDO1_V_OUT, AXP22X_ALDO1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL3, AXP806_PWR_OUT_ALDO1_MASK),
AXP_DESC(AXP813, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
AXP22X_ALDO2_V_OUT, AXP22X_ALDO2_V_OUT,
AXP22X_ALDO2_V_OUT, AXP22X_ALDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL3, AXP806_PWR_OUT_ALDO2_MASK),
AXP_DESC(AXP813, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
AXP22X_ALDO3_V_OUT, AXP22X_ALDO3_V_OUT_MASK,
@ -962,7 +963,7 @@ static const struct regulator_desc axp813_regulators[] = {
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO1_MASK),
AXP_DESC_RANGES(AXP813, DLDO2, "dldo2", "dldoin",
axp803_dldo2_ranges, AXP803_DLDO2_NUM_VOLTAGES,
AXP22X_DLDO2_V_OUT, AXP22X_DLDO2_V_OUT,
AXP22X_DLDO2_V_OUT, AXP22X_DLDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO2_MASK),
AXP_DESC(AXP813, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
AXP22X_DLDO3_V_OUT, AXP22X_DLDO3_V_OUT_MASK,
@ -977,7 +978,7 @@ static const struct regulator_desc axp813_regulators[] = {
AXP22X_ELDO2_V_OUT, AXP22X_ELDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO2_MASK),
AXP_DESC(AXP813, ELDO3, "eldo3", "eldoin", 700, 1900, 50,
AXP22X_ELDO3_V_OUT, AXP22X_ELDO3_V_OUT,
AXP22X_ELDO3_V_OUT, AXP22X_ELDO3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO3_MASK),
/* to do / check ... */
AXP_DESC(AXP813, FLDO1, "fldo1", "fldoin", 700, 1450, 50,

4
drivers/regulator/bcm590xx-regulator.c
View File

@ -242,8 +242,12 @@ static int bcm590xx_get_enable_register(int id)
case BCM590XX_REG_SDSR2:
reg = BCM590XX_SDSR2PMCTRL1;
break;
case BCM590XX_REG_VSR:
reg = BCM590XX_VSRPMCTRL1;
break;
case BCM590XX_REG_VBUS:
reg = BCM590XX_OTG_CTRL;
break;
}

289
drivers/regulator/bd70528-regulator.c Normal file
View File

@ -0,0 +1,289 @@
// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2018 ROHM Semiconductors
// bd70528-regulator.c ROHM BD70528MWV regulator driver
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mfd/rohm-bd70528.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/slab.h>
#define BUCK_RAMPRATE_250MV 0
#define BUCK_RAMPRATE_125MV 1
#define BUCK_RAMP_MAX 250
static const struct regulator_linear_range bd70528_buck1_volts[] = {
REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 600000),
REGULATOR_LINEAR_RANGE(2750000, 0x2, 0xf, 50000),
};
static const struct regulator_linear_range bd70528_buck2_volts[] = {
REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 300000),
REGULATOR_LINEAR_RANGE(1550000, 0x2, 0xd, 50000),
REGULATOR_LINEAR_RANGE(3000000, 0xe, 0xf, 300000),
};
static const struct regulator_linear_range bd70528_buck3_volts[] = {
REGULATOR_LINEAR_RANGE(800000, 0x00, 0xd, 50000),
REGULATOR_LINEAR_RANGE(1800000, 0xe, 0xf, 0),
};
/* All LDOs have same voltage ranges */
static const struct regulator_linear_range bd70528_ldo_volts[] = {
REGULATOR_LINEAR_RANGE(1650000, 0x0, 0x07, 50000),
REGULATOR_LINEAR_RANGE(2100000, 0x8, 0x0f, 100000),
REGULATOR_LINEAR_RANGE(2850000, 0x10, 0x19, 50000),
REGULATOR_LINEAR_RANGE(3300000, 0x19, 0x1f, 0),
};
/* Also both LEDs support same voltages */
static const unsigned int led_volts[] = {
20000, 30000
};
static int bd70528_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
if (ramp_delay > 0 && ramp_delay <= BUCK_RAMP_MAX) {
unsigned int ramp_value = BUCK_RAMPRATE_250MV;
if (ramp_delay <= 125)
ramp_value = BUCK_RAMPRATE_125MV;
return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
BD70528_MASK_BUCK_RAMP,
ramp_value << BD70528_SIFT_BUCK_RAMP);
}
dev_err(&rdev->dev, "%s: ramp_delay: %d not supported\n",
rdev->desc->name, ramp_delay);
return -EINVAL;
}
static int bd70528_led_set_voltage_sel(struct regulator_dev *rdev,
unsigned int sel)
{
int ret;
ret = regulator_is_enabled_regmap(rdev);
if (ret < 0)
return ret;
if (ret == 0)
return regulator_set_voltage_sel_regmap(rdev, sel);
dev_err(&rdev->dev,
"LED voltage change not allowed when led is enabled\n");
return -EBUSY;
}
static const struct regulator_ops bd70528_buck_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_linear_range,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = bd70528_set_ramp_delay,
};
static const struct regulator_ops bd70528_ldo_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_linear_range,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = bd70528_set_ramp_delay,
};
static const struct regulator_ops bd70528_led_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_table,
.set_voltage_sel = bd70528_led_set_voltage_sel,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
};
static const struct regulator_desc bd70528_desc[] = {
{
.name = "buck1",
.of_match = of_match_ptr("BUCK1"),
.regulators_node = of_match_ptr("regulators"),
.id = BD70528_BUCK1,
.ops = &bd70528_buck_ops,
.type = REGULATOR_VOLTAGE,
.linear_ranges = bd70528_buck1_volts,
.n_linear_ranges = ARRAY_SIZE(bd70528_buck1_volts),
.n_voltages = BD70528_BUCK_VOLTS,
.enable_reg = BD70528_REG_BUCK1_EN,
.enable_mask = BD70528_MASK_RUN_EN,
.vsel_reg = BD70528_REG_BUCK1_VOLT,
.vsel_mask = BD70528_MASK_BUCK_VOLT,
.owner = THIS_MODULE,
},
{
.name = "buck2",
.of_match = of_match_ptr("BUCK2"),
.regulators_node = of_match_ptr("regulators"),
.id = BD70528_BUCK2,
.ops = &bd70528_buck_ops,
.type = REGULATOR_VOLTAGE,
.linear_ranges = bd70528_buck2_volts,
.n_linear_ranges = ARRAY_SIZE(bd70528_buck2_volts),
.n_voltages = BD70528_BUCK_VOLTS,
.enable_reg = BD70528_REG_BUCK2_EN,
.enable_mask = BD70528_MASK_RUN_EN,
.vsel_reg = BD70528_REG_BUCK2_VOLT,
.vsel_mask = BD70528_MASK_BUCK_VOLT,
.owner = THIS_MODULE,
},
{
.name = "buck3",
.of_match = of_match_ptr("BUCK3"),
.regulators_node = of_match_ptr("regulators"),
.id = BD70528_BUCK3,
.ops = &bd70528_buck_ops,
.type = REGULATOR_VOLTAGE,
.linear_ranges = bd70528_buck3_volts,
.n_linear_ranges = ARRAY_SIZE(bd70528_buck3_volts),
.n_voltages = BD70528_BUCK_VOLTS,
.enable_reg = BD70528_REG_BUCK3_EN,
.enable_mask = BD70528_MASK_RUN_EN,
.vsel_reg = BD70528_REG_BUCK3_VOLT,
.vsel_mask = BD70528_MASK_BUCK_VOLT,
.owner = THIS_MODULE,
},
{
.name = "ldo1",
.of_match = of_match_ptr("LDO1"),
.regulators_node = of_match_ptr("regulators"),
.id = BD70528_LDO1,
.ops = &bd70528_ldo_ops,
.type = REGULATOR_VOLTAGE,
.linear_ranges = bd70528_ldo_volts,
.n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts),
.n_voltages = BD70528_LDO_VOLTS,
.enable_reg = BD70528_REG_LDO1_EN,
.enable_mask = BD70528_MASK_RUN_EN,
.vsel_reg = BD70528_REG_LDO1_VOLT,
.vsel_mask = BD70528_MASK_LDO_VOLT,
.owner = THIS_MODULE,
},
{
.name = "ldo2",
.of_match = of_match_ptr("LDO2"),
.regulators_node = of_match_ptr("regulators"),
.id = BD70528_LDO2,
.ops = &bd70528_ldo_ops,
.type = REGULATOR_VOLTAGE,
.linear_ranges = bd70528_ldo_volts,
.n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts),
.n_voltages = BD70528_LDO_VOLTS,
.enable_reg = BD70528_REG_LDO2_EN,
.enable_mask = BD70528_MASK_RUN_EN,
.vsel_reg = BD70528_REG_LDO2_VOLT,
.vsel_mask = BD70528_MASK_LDO_VOLT,
.owner = THIS_MODULE,
},
{
.name = "ldo3",
.of_match = of_match_ptr("LDO3"),
.regulators_node = of_match_ptr("regulators"),
.id = BD70528_LDO3,
.ops = &bd70528_ldo_ops,
.type = REGULATOR_VOLTAGE,
.linear_ranges = bd70528_ldo_volts,
.n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts),
.n_voltages = BD70528_LDO_VOLTS,
.enable_reg = BD70528_REG_LDO3_EN,
.enable_mask = BD70528_MASK_RUN_EN,
.vsel_reg = BD70528_REG_LDO3_VOLT,
.vsel_mask = BD70528_MASK_LDO_VOLT,
.owner = THIS_MODULE,
},
{
.name = "ldo_led1",
.of_match = of_match_ptr("LDO_LED1"),
.regulators_node = of_match_ptr("regulators"),
.id = BD70528_LED1,
.ops = &bd70528_led_ops,
.type = REGULATOR_VOLTAGE,
.volt_table = &led_volts[0],
.n_voltages = ARRAY_SIZE(led_volts),
.enable_reg = BD70528_REG_LED_EN,
.enable_mask = BD70528_MASK_LED1_EN,
.vsel_reg = BD70528_REG_LED_VOLT,
.vsel_mask = BD70528_MASK_LED1_VOLT,
.owner = THIS_MODULE,
},
{
.name = "ldo_led2",
.of_match = of_match_ptr("LDO_LED2"),
.regulators_node = of_match_ptr("regulators"),
.id = BD70528_LED2,
.ops = &bd70528_led_ops,
.type = REGULATOR_VOLTAGE,
.volt_table = &led_volts[0],
.n_voltages = ARRAY_SIZE(led_volts),
.enable_reg = BD70528_REG_LED_EN,
.enable_mask = BD70528_MASK_LED2_EN,
.vsel_reg = BD70528_REG_LED_VOLT,
.vsel_mask = BD70528_MASK_LED2_VOLT,
.owner = THIS_MODULE,
},
};
static int bd70528_probe(struct platform_device *pdev)
{
struct rohm_regmap_dev *bd70528;
int i;
struct regulator_config config = {
.dev = pdev->dev.parent,
};
bd70528 = dev_get_drvdata(pdev->dev.parent);
if (!bd70528) {
dev_err(&pdev->dev, "No MFD driver data\n");
return -EINVAL;
}
config.regmap = bd70528->regmap;
for (i = 0; i < ARRAY_SIZE(bd70528_desc); i++) {
struct regulator_dev *rdev;
rdev = devm_regulator_register(&pdev->dev, &bd70528_desc[i],
&config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev,
"failed to register %s regulator\n",
bd70528_desc[i].name);
return PTR_ERR(rdev);
}
}
return 0;
}
static struct platform_driver bd70528_regulator = {
.driver = {
.name = "bd70528-pmic"
},
.probe = bd70528_probe,
};
module_platform_driver(bd70528_regulator);
MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
MODULE_DESCRIPTION("BD70528 voltage regulator driver");
MODULE_LICENSE("GPL");

215
drivers/regulator/bd718x7-regulator.c
View File

@ -79,7 +79,7 @@ static int bd718xx_set_voltage_sel_pickable_restricted(
return regulator_set_voltage_sel_pickable_regmap(rdev, sel);
}
static struct regulator_ops bd718xx_pickable_range_ldo_ops = {
static const struct regulator_ops bd718xx_pickable_range_ldo_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@ -88,7 +88,7 @@ static struct regulator_ops bd718xx_pickable_range_ldo_ops = {
.get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
};
static struct regulator_ops bd718xx_pickable_range_buck_ops = {
static const struct regulator_ops bd718xx_pickable_range_buck_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@ -98,7 +98,7 @@ static struct regulator_ops bd718xx_pickable_range_buck_ops = {
.set_voltage_time_sel = regulator_set_voltage_time_sel,
};
static struct regulator_ops bd718xx_ldo_regulator_ops = {
static const struct regulator_ops bd718xx_ldo_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@ -107,7 +107,7 @@ static struct regulator_ops bd718xx_ldo_regulator_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
};
static struct regulator_ops bd718xx_ldo_regulator_nolinear_ops = {
static const struct regulator_ops bd718xx_ldo_regulator_nolinear_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@ -116,7 +116,7 @@ static struct regulator_ops bd718xx_ldo_regulator_nolinear_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
};
static struct regulator_ops bd718xx_buck_regulator_ops = {
static const struct regulator_ops bd718xx_buck_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@ -126,7 +126,7 @@ static struct regulator_ops bd718xx_buck_regulator_ops = {
.set_voltage_time_sel = regulator_set_voltage_time_sel,
};
static struct regulator_ops bd718xx_buck_regulator_nolinear_ops = {
static const struct regulator_ops bd718xx_buck_regulator_nolinear_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@ -137,7 +137,7 @@ static struct regulator_ops bd718xx_buck_regulator_nolinear_ops = {
.set_voltage_time_sel = regulator_set_voltage_time_sel,
};
static struct regulator_ops bd718xx_dvs_buck_regulator_ops = {
static const struct regulator_ops bd718xx_dvs_buck_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@ -350,6 +350,135 @@ static const struct reg_init bd71837_ldo6_inits[] = {
},
};
#define NUM_DVS_BUCKS 4
struct of_dvs_setting {
const char *prop;
unsigned int reg;
};
static int set_dvs_levels(const struct of_dvs_setting *dvs,
struct device_node *np,
const struct regulator_desc *desc,
struct regmap *regmap)
{
int ret, i;
unsigned int uv;
ret = of_property_read_u32(np, dvs->prop, &uv);
if (ret) {
if (ret != -EINVAL)
return ret;
return 0;
}
for (i = 0; i < desc->n_voltages; i++) {
ret = regulator_desc_list_voltage_linear_range(desc, i);
if (ret < 0)
continue;
if (ret == uv) {
i <<= ffs(desc->vsel_mask) - 1;
ret = regmap_update_bits(regmap, dvs->reg,
DVS_BUCK_RUN_MASK, i);
break;
}
}
return ret;
}
static int buck4_set_hw_dvs_levels(struct device_node *np,
const struct regulator_desc *desc,
struct regulator_config *cfg)
{
int ret, i;
const struct of_dvs_setting dvs[] = {
{
.prop = "rohm,dvs-run-voltage",
.reg = BD71837_REG_BUCK4_VOLT_RUN,
},
};
for (i = 0; i < ARRAY_SIZE(dvs); i++) {
ret = set_dvs_levels(&dvs[i], np, desc, cfg->regmap);
if (ret)
break;
}
return ret;
}
static int buck3_set_hw_dvs_levels(struct device_node *np,
const struct regulator_desc *desc,
struct regulator_config *cfg)
{
int ret, i;
const struct of_dvs_setting dvs[] = {
{
.prop = "rohm,dvs-run-voltage",
.reg = BD71837_REG_BUCK3_VOLT_RUN,
},
};
for (i = 0; i < ARRAY_SIZE(dvs); i++) {
ret = set_dvs_levels(&dvs[i], np, desc, cfg->regmap);
if (ret)
break;
}
return ret;
}
static int buck2_set_hw_dvs_levels(struct device_node *np,
const struct regulator_desc *desc,
struct regulator_config *cfg)
{
int ret, i;
const struct of_dvs_setting dvs[] = {
{
.prop = "rohm,dvs-run-voltage",
.reg = BD718XX_REG_BUCK2_VOLT_RUN,
},
{
.prop = "rohm,dvs-idle-voltage",
.reg = BD718XX_REG_BUCK2_VOLT_IDLE,
},
};
for (i = 0; i < ARRAY_SIZE(dvs); i++) {
ret = set_dvs_levels(&dvs[i], np, desc, cfg->regmap);
if (ret)
break;
}
return ret;
}
static int buck1_set_hw_dvs_levels(struct device_node *np,
const struct regulator_desc *desc,
struct regulator_config *cfg)
{
int ret, i;
const struct of_dvs_setting dvs[] = {
{
.prop = "rohm,dvs-run-voltage",
.reg = BD718XX_REG_BUCK1_VOLT_RUN,
},
{
.prop = "rohm,dvs-idle-voltage",
.reg = BD718XX_REG_BUCK1_VOLT_IDLE,
},
{
.prop = "rohm,dvs-suspend-voltage",
.reg = BD718XX_REG_BUCK1_VOLT_SUSP,
},
};
for (i = 0; i < ARRAY_SIZE(dvs); i++) {
ret = set_dvs_levels(&dvs[i], np, desc, cfg->regmap);
if (ret)
break;
}
return ret;
}
static const struct bd718xx_regulator_data bd71847_regulators[] = {
{
.desc = {
@ -368,6 +497,7 @@ static const struct bd718xx_regulator_data bd71847_regulators[] = {
.enable_reg = BD718XX_REG_BUCK1_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.owner = THIS_MODULE,
.of_parse_cb = buck1_set_hw_dvs_levels,
},
.init = {
.reg = BD718XX_REG_BUCK1_CTRL,
@ -391,6 +521,7 @@ static const struct bd718xx_regulator_data bd71847_regulators[] = {
.enable_reg = BD718XX_REG_BUCK2_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.owner = THIS_MODULE,
.of_parse_cb = buck2_set_hw_dvs_levels,
},
.init = {
.reg = BD718XX_REG_BUCK2_CTRL,
@ -662,6 +793,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
.enable_reg = BD718XX_REG_BUCK1_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.owner = THIS_MODULE,
.of_parse_cb = buck1_set_hw_dvs_levels,
},
.init = {
.reg = BD718XX_REG_BUCK1_CTRL,
@ -685,6 +817,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
.enable_reg = BD718XX_REG_BUCK2_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.owner = THIS_MODULE,
.of_parse_cb = buck2_set_hw_dvs_levels,
},
.init = {
.reg = BD718XX_REG_BUCK2_CTRL,
@ -708,6 +841,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
.enable_reg = BD71837_REG_BUCK3_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.owner = THIS_MODULE,
.of_parse_cb = buck3_set_hw_dvs_levels,
},
.init = {
.reg = BD71837_REG_BUCK3_CTRL,
@ -731,6 +865,7 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
.enable_reg = BD71837_REG_BUCK4_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.owner = THIS_MODULE,
.of_parse_cb = buck4_set_hw_dvs_levels,
},
.init = {
.reg = BD71837_REG_BUCK4_CTRL,
@ -1029,6 +1164,7 @@ static int bd718xx_probe(struct platform_device *pdev)
};
int i, j, err;
bool use_snvs;
mfd = dev_get_drvdata(pdev->dev.parent);
if (!mfd) {
@ -1055,27 +1191,28 @@ static int bd718xx_probe(struct platform_device *pdev)
BD718XX_REG_REGLOCK);
}
/* At poweroff transition PMIC HW disables EN bit for regulators but
* leaves SEL bit untouched. So if state transition from POWEROFF
* is done to SNVS - then all power rails controlled by SW (having
* SEL bit set) stay disabled as EN is cleared. This may result boot
* failure if any crucial systems are powered by these rails.
*
use_snvs = of_property_read_bool(pdev->dev.parent->of_node,
"rohm,reset-snvs-powered");
/*
* Change the next stage from poweroff to be READY instead of SNVS
* for all reset types because OTP loading at READY will clear SEL
* bit allowing HW defaults for power rails to be used
*/
err = regmap_update_bits(mfd->regmap, BD718XX_REG_TRANS_COND1,
BD718XX_ON_REQ_POWEROFF_MASK |
BD718XX_SWRESET_POWEROFF_MASK |
BD718XX_WDOG_POWEROFF_MASK |
BD718XX_KEY_L_POWEROFF_MASK,
BD718XX_POWOFF_TO_RDY);
if (err) {
dev_err(&pdev->dev, "Failed to change reset target\n");
goto err;
} else {
dev_dbg(&pdev->dev, "Changed all resets from SVNS to READY\n");
if (!use_snvs) {
err = regmap_update_bits(mfd->regmap, BD718XX_REG_TRANS_COND1,
BD718XX_ON_REQ_POWEROFF_MASK |
BD718XX_SWRESET_POWEROFF_MASK |
BD718XX_WDOG_POWEROFF_MASK |
BD718XX_KEY_L_POWEROFF_MASK,
BD718XX_POWOFF_TO_RDY);
if (err) {
dev_err(&pdev->dev, "Failed to change reset target\n");
goto err;
} else {
dev_dbg(&pdev->dev,
"Changed all resets from SVNS to READY\n");
}
}
for (i = 0; i < pmic_regulators[mfd->chip_type].r_amount; i++) {
@ -1098,19 +1235,33 @@ static int bd718xx_probe(struct platform_device *pdev)
err = PTR_ERR(rdev);
goto err;
}
/* Regulator register gets the regulator constraints and
/*
* Regulator register gets the regulator constraints and
* applies them (set_machine_constraints). This should have
* turned the control register(s) to correct values and we
* can now switch the control from PMIC state machine to the
* register interface
*
* At poweroff transition PMIC HW disables EN bit for
* regulators but leaves SEL bit untouched. So if state
* transition from POWEROFF is done to SNVS - then all power
* rails controlled by SW (having SEL bit set) stay disabled
* as EN is cleared. This will result boot failure if any
* crucial systems are powered by these rails. We don't
* enable SW control for crucial regulators if snvs state is
* used
*/
err = regmap_update_bits(mfd->regmap, r->init.reg,
r->init.mask, r->init.val);
if (err) {
dev_err(&pdev->dev,
"Failed to write BUCK/LDO SEL bit for (%s)\n",
desc->name);
goto err;
if (!use_snvs || !rdev->constraints->always_on ||
!rdev->constraints->boot_on) {
err = regmap_update_bits(mfd->regmap, r->init.reg,
r->init.mask, r->init.val);
if (err) {
dev_err(&pdev->dev,
"Failed to take control for (%s)\n",
desc->name);
goto err;
}
}
for (j = 0; j < r->additional_init_amnt; j++) {
err = regmap_update_bits(mfd->regmap,

8
drivers/regulator/bd9571mwv-regulator.c
View File

@ -100,7 +100,7 @@ static int bd9571mwv_reg_set_voltage_sel_regmap(struct regulator_dev *rdev,
}
/* Operations permitted on AVS voltage regulator */
static struct regulator_ops avs_ops = {
static const struct regulator_ops avs_ops = {
.set_voltage_sel = bd9571mwv_avs_set_voltage_sel_regmap,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = bd9571mwv_avs_get_voltage_sel_regmap,
@ -108,7 +108,7 @@ static struct regulator_ops avs_ops = {
};
/* Operations permitted on voltage regulators */
static struct regulator_ops reg_ops = {
static const struct regulator_ops reg_ops = {
.set_voltage_sel = bd9571mwv_reg_set_voltage_sel_regmap,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@ -116,13 +116,13 @@ static struct regulator_ops reg_ops = {
};
/* Operations permitted on voltage monitors */
static struct regulator_ops vid_ops = {
static const struct regulator_ops vid_ops = {
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
};
static struct regulator_desc regulators[] = {
static const struct regulator_desc regulators[] = {
BD9571MWV_REG("VD09", "vd09", VD09, avs_ops, 0, 0x7f,
0x80, 600000, 10000, 0x3c),
BD9571MWV_REG("VD18", "vd18", VD18, vid_ops, BD9571MWV_VD18_VID, 0xf,

88
drivers/regulator/core.c
View File

@ -23,7 +23,6 @@
#include <linux/mutex.h>
#include <linux/suspend.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
#include <linux/regmap.h>
@ -82,7 +81,6 @@ struct regulator_enable_gpio {
struct gpio_desc *gpiod;
u32 enable_count; /* a number of enabled shared GPIO */
u32 request_count; /* a number of requested shared GPIO */
unsigned int ena_gpio_invert:1;
};
/*
@ -145,14 +143,6 @@ static bool regulator_ops_is_valid(struct regulator_dev *rdev, int ops)
return false;
}
static inline struct regulator_dev *rdev_get_supply(struct regulator_dev *rdev)
{
if (rdev && rdev->supply)
return rdev->supply->rdev;
return NULL;
}
/**
* regulator_lock_nested - lock a single regulator
* @rdev: regulator source
@ -326,7 +316,7 @@ static int regulator_lock_recursive(struct regulator_dev *rdev,
* @rdev: regulator source
* @ww_ctx: w/w mutex acquire context
*
* Unlock all regulators related with rdev by coupling or suppling.
* Unlock all regulators related with rdev by coupling or supplying.
*/
static void regulator_unlock_dependent(struct regulator_dev *rdev,
struct ww_acquire_ctx *ww_ctx)
@ -341,7 +331,7 @@ static void regulator_unlock_dependent(struct regulator_dev *rdev,
* @ww_ctx: w/w mutex acquire context
*
* This function as a wrapper on regulator_lock_recursive(), which locks
* all regulators related with rdev by coupling or suppling.
* all regulators related with rdev by coupling or supplying.
*/
static void regulator_lock_dependent(struct regulator_dev *rdev,
struct ww_acquire_ctx *ww_ctx)
@ -924,14 +914,14 @@ static int drms_uA_update(struct regulator_dev *rdev)
int current_uA = 0, output_uV, input_uV, err;
unsigned int mode;
lockdep_assert_held_once(&rdev->mutex.base);
/*
* first check to see if we can set modes at all, otherwise just
* tell the consumer everything is OK.
*/
if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS))
if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS)) {
rdev_dbg(rdev, "DRMS operation not allowed\n");
return 0;
}
if (!rdev->desc->ops->get_optimum_mode &&
!rdev->desc->ops->set_load)
@ -1003,7 +993,7 @@ static int suspend_set_state(struct regulator_dev *rdev,
if (rstate == NULL)
return 0;
/* If we have no suspend mode configration don't set anything;
/* If we have no suspend mode configuration don't set anything;
* only warn if the driver implements set_suspend_voltage or
* set_suspend_mode callback.
*/
@ -1131,7 +1121,7 @@ static int machine_constraints_voltage(struct regulator_dev *rdev,
int current_uV = _regulator_get_voltage(rdev);
if (current_uV == -ENOTRECOVERABLE) {
/* This regulator can't be read and must be initted */
/* This regulator can't be read and must be initialized */
rdev_info(rdev, "Setting %d-%duV\n",
rdev->constraints->min_uV,
rdev->constraints->max_uV);
@ -1349,7 +1339,9 @@ static int set_machine_constraints(struct regulator_dev *rdev,
* We'll only apply the initial system load if an
* initial mode wasn't specified.
*/
regulator_lock(rdev);
drms_uA_update(rdev);
regulator_unlock(rdev);
}
if ((rdev->constraints->ramp_delay || rdev->constraints->ramp_disable)
@ -1780,7 +1772,7 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
struct device *dev = rdev->dev.parent;
int ret;
/* No supply to resovle? */
/* No supply to resolve? */
if (!rdev->supply_name)
return 0;
@ -2058,15 +2050,7 @@ static void _regulator_put(struct regulator *regulator)
debugfs_remove_recursive(regulator->debugfs);
if (regulator->dev) {
int count = 0;
struct regulator *r;
list_for_each_entry(r, &rdev->consumer_list, list)
if (r->dev == regulator->dev)
count++;
if (count == 1)
device_link_remove(regulator->dev, &rdev->dev);
device_link_remove(regulator->dev, &rdev->dev);
/* remove any sysfs entries */
sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
@ -2237,38 +2221,21 @@ static int regulator_ena_gpio_request(struct regulator_dev *rdev,
{
struct regulator_enable_gpio *pin;
struct gpio_desc *gpiod;
int ret;
if (config->ena_gpiod)
gpiod = config->ena_gpiod;
else
gpiod = gpio_to_desc(config->ena_gpio);
gpiod = config->ena_gpiod;
list_for_each_entry(pin, &regulator_ena_gpio_list, list) {
if (pin->gpiod == gpiod) {
rdev_dbg(rdev, "GPIO %d is already used\n",
config->ena_gpio);
rdev_dbg(rdev, "GPIO is already used\n");
goto update_ena_gpio_to_rdev;
}
}
if (!config->ena_gpiod) {
ret = gpio_request_one(config->ena_gpio,
GPIOF_DIR_OUT | config->ena_gpio_flags,
rdev_get_name(rdev));
if (ret)
return ret;
}
pin = kzalloc(sizeof(struct regulator_enable_gpio), GFP_KERNEL);
if (pin == NULL) {
if (!config->ena_gpiod)
gpio_free(config->ena_gpio);
if (pin == NULL)
return -ENOMEM;
}
pin->gpiod = gpiod;
pin->ena_gpio_invert = config->ena_gpio_invert;
list_add(&pin->list, &regulator_ena_gpio_list);
update_ena_gpio_to_rdev:
@ -2289,7 +2256,6 @@ static void regulator_ena_gpio_free(struct regulator_dev *rdev)
if (pin->gpiod == rdev->ena_pin->gpiod) {
if (pin->request_count <= 1) {
pin->request_count = 0;
gpiod_put(pin->gpiod);
list_del(&pin->list);
kfree(pin);
rdev->ena_pin = NULL;
@ -2319,8 +2285,7 @@ static int regulator_ena_gpio_ctrl(struct regulator_dev *rdev, bool enable)
if (enable) {
/* Enable GPIO at initial use */
if (pin->enable_count == 0)
gpiod_set_value_cansleep(pin->gpiod,
!pin->ena_gpio_invert);
gpiod_set_value_cansleep(pin->gpiod, 1);
pin->enable_count++;
} else {
@ -2331,8 +2296,7 @@ static int regulator_ena_gpio_ctrl(struct regulator_dev *rdev, bool enable)
/* Disable GPIO if not used */
if (pin->enable_count <= 1) {
gpiod_set_value_cansleep(pin->gpiod,
pin->ena_gpio_invert);
gpiod_set_value_cansleep(pin->gpiod, 0);
pin->enable_count = 0;
}
}
@ -2409,7 +2373,7 @@ static int _regulator_do_enable(struct regulator_dev *rdev)
* timer wrapping.
* in case of multiple timer wrapping, either it can be
* detected by out-of-range remaining, or it cannot be
* detected and we gets a panelty of
* detected and we get a penalty of
* _regulator_enable_delay().
*/
remaining = intended - start_jiffy;
@ -2809,7 +2773,7 @@ static void regulator_disable_work(struct work_struct *work)
/**
* regulator_disable_deferred - disable regulator output with delay
* @regulator: regulator source
* @ms: miliseconds until the regulator is disabled
* @ms: milliseconds until the regulator is disabled
*
* Execute regulator_disable() on the regulator after a delay. This
* is intended for use with devices that require some time to quiesce.
@ -4943,7 +4907,7 @@ regulator_register(const struct regulator_desc *regulator_desc,
* device tree until we have handled it over to the core. If the
* config that was passed in to this function DOES NOT contain
* a descriptor, and the config after this call DOES contain
* a descriptor, we definately got one from parsing the device
* a descriptor, we definitely got one from parsing the device
* tree.
*/
if (!cfg->ena_gpiod && config->ena_gpiod)
@ -4975,15 +4939,13 @@ regulator_register(const struct regulator_desc *regulator_desc,
goto clean;
}
if (config->ena_gpiod ||
((config->ena_gpio || config->ena_gpio_initialized) &&
gpio_is_valid(config->ena_gpio))) {
if (config->ena_gpiod) {
mutex_lock(&regulator_list_mutex);
ret = regulator_ena_gpio_request(rdev, config);
mutex_unlock(&regulator_list_mutex);
if (ret != 0) {
rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
config->ena_gpio, ret);
rdev_err(rdev, "Failed to request enable GPIO: %d\n",
ret);
goto clean;
}
/* The regulator core took over the GPIO descriptor */
@ -5251,6 +5213,12 @@ struct device *rdev_get_dev(struct regulator_dev *rdev)
}
EXPORT_SYMBOL_GPL(rdev_get_dev);
struct regmap *rdev_get_regmap(struct regulator_dev *rdev)
{
return rdev->regmap;
}
EXPORT_SYMBOL_GPL(rdev_get_regmap);
void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data)
{
return reg_init_data->driver_data;

106
drivers/regulator/cpcap-regulator.c
View File

@ -100,12 +100,11 @@ struct cpcap_regulator {
struct regulator_desc rdesc;
const u16 assign_reg;
const u16 assign_mask;
const u16 vsel_shift;
};
#define CPCAP_REG(_ID, reg, assignment_reg, assignment_mask, val_tbl, \
mode_mask, volt_mask, volt_shft, \
mode_val, off_val, volt_trans_time) { \
mode_mask, volt_mask, mode_val, off_val, \
volt_trans_time) { \
.rdesc = { \
.name = #_ID, \
.of_match = of_match_ptr(#_ID), \
@ -127,7 +126,6 @@ struct cpcap_regulator {
}, \
.assign_reg = (assignment_reg), \
.assign_mask = (assignment_mask), \
.vsel_shift = (volt_shft), \
}
struct cpcap_ddata {
@ -336,155 +334,155 @@ static const unsigned int vaudio_val_tbl[] = { 0, 2775000, };
* SW1 to SW4 and SW6 seems to be unused for mapphone. Note that VSIM and
* VSIMCARD have a shared resource assignment bit.
*/
static struct cpcap_regulator omap4_regulators[] = {
static const struct cpcap_regulator omap4_regulators[] = {
CPCAP_REG(SW1, CPCAP_REG_S1C1, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW1_SEL, unknown_val_tbl,
0, 0, 0, 0, 0, 0),
0, 0, 0, 0, 0),
CPCAP_REG(SW2, CPCAP_REG_S2C1, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW2_SEL, unknown_val_tbl,
0, 0, 0, 0, 0, 0),
0, 0, 0, 0, 0),
CPCAP_REG(SW3, CPCAP_REG_S3C, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW3_SEL, unknown_val_tbl,
0, 0, 0, 0, 0, 0),
0, 0, 0, 0, 0),
CPCAP_REG(SW4, CPCAP_REG_S4C1, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW4_SEL, unknown_val_tbl,
0, 0, 0, 0, 0, 0),
0, 0, 0, 0, 0),
CPCAP_REG(SW5, CPCAP_REG_S5C, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW5_SEL, sw5_val_tbl,
0x28, 0, 0, 0x20 | CPCAP_REG_OFF_MODE_SEC, 0, 0),
0x28, 0, 0x20 | CPCAP_REG_OFF_MODE_SEC, 0, 0),
CPCAP_REG(SW6, CPCAP_REG_S6C, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW6_SEL, unknown_val_tbl,
0, 0, 0, 0, 0, 0),
0, 0, 0, 0, 0),
CPCAP_REG(VCAM, CPCAP_REG_VCAMC, CPCAP_REG_ASSIGN2,
CPCAP_BIT_VCAM_SEL, vcam_val_tbl,
0x87, 0x30, 4, 0x3, 0, 420),
0x87, 0x30, 0x3, 0, 420),
CPCAP_REG(VCSI, CPCAP_REG_VCSIC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VCSI_SEL, vcsi_val_tbl,
0x47, 0x10, 4, 0x43, 0x41, 350),
0x47, 0x10, 0x43, 0x41, 350),
CPCAP_REG(VDAC, CPCAP_REG_VDACC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VDAC_SEL, vdac_val_tbl,
0x87, 0x30, 4, 0x3, 0, 420),
0x87, 0x30, 0x3, 0, 420),
CPCAP_REG(VDIG, CPCAP_REG_VDIGC, CPCAP_REG_ASSIGN2,
CPCAP_BIT_VDIG_SEL, vdig_val_tbl,
0x87, 0x30, 4, 0x82, 0, 420),
0x87, 0x30, 0x82, 0, 420),
CPCAP_REG(VFUSE, CPCAP_REG_VFUSEC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VFUSE_SEL, vfuse_val_tbl,
0x80, 0xf, 0, 0x80, 0, 420),
0x80, 0xf, 0x80, 0, 420),
CPCAP_REG(VHVIO, CPCAP_REG_VHVIOC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VHVIO_SEL, vhvio_val_tbl,
0x17, 0, 0, 0, 0x12, 0),
0x17, 0, 0, 0x12, 0),
CPCAP_REG(VSDIO, CPCAP_REG_VSDIOC, CPCAP_REG_ASSIGN2,
CPCAP_BIT_VSDIO_SEL, vsdio_val_tbl,
0x87, 0x38, 3, 0x82, 0, 420),
0x87, 0x38, 0x82, 0, 420),
CPCAP_REG(VPLL, CPCAP_REG_VPLLC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VPLL_SEL, vpll_val_tbl,
0x43, 0x18, 3, 0x2, 0, 420),
0x43, 0x18, 0x2, 0, 420),
CPCAP_REG(VRF1, CPCAP_REG_VRF1C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VRF1_SEL, vrf1_val_tbl,
0xac, 0x2, 1, 0x4, 0, 10),
0xac, 0x2, 0x4, 0, 10),
CPCAP_REG(VRF2, CPCAP_REG_VRF2C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VRF2_SEL, vrf2_val_tbl,
0x23, 0x8, 3, 0, 0, 10),
0x23, 0x8, 0, 0, 10),
CPCAP_REG(VRFREF, CPCAP_REG_VRFREFC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VRFREF_SEL, vrfref_val_tbl,
0x23, 0x8, 3, 0, 0, 420),
0x23, 0x8, 0, 0, 420),
CPCAP_REG(VWLAN1, CPCAP_REG_VWLAN1C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VWLAN1_SEL, vwlan1_val_tbl,
0x47, 0x10, 4, 0, 0, 420),
0x47, 0x10, 0, 0, 420),
CPCAP_REG(VWLAN2, CPCAP_REG_VWLAN2C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VWLAN2_SEL, vwlan2_val_tbl,
0x20c, 0xc0, 6, 0x20c, 0, 420),
0x20c, 0xc0, 0x20c, 0, 420),
CPCAP_REG(VSIM, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
0xffff, vsim_val_tbl,
0x23, 0x8, 3, 0x3, 0, 420),
0x23, 0x8, 0x3, 0, 420),
CPCAP_REG(VSIMCARD, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
0xffff, vsimcard_val_tbl,
0x1e80, 0x8, 3, 0x1e00, 0, 420),
0x1e80, 0x8, 0x1e00, 0, 420),
CPCAP_REG(VVIB, CPCAP_REG_VVIBC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VVIB_SEL, vvib_val_tbl,
0x1, 0xc, 2, 0x1, 0, 500),
0x1, 0xc, 0x1, 0, 500),
CPCAP_REG(VUSB, CPCAP_REG_VUSBC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VUSB_SEL, vusb_val_tbl,
0x11c, 0x40, 6, 0xc, 0, 0),
0x11c, 0x40, 0xc, 0, 0),
CPCAP_REG(VAUDIO, CPCAP_REG_VAUDIOC, CPCAP_REG_ASSIGN4,
CPCAP_BIT_VAUDIO_SEL, vaudio_val_tbl,
0x16, 0x1, 0, 0x4, 0, 0),
0x16, 0x1, 0x4, 0, 0),
{ /* sentinel */ },
};
static struct cpcap_regulator xoom_regulators[] = {
static const struct cpcap_regulator xoom_regulators[] = {
CPCAP_REG(SW1, CPCAP_REG_S1C1, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW1_SEL, unknown_val_tbl,
0, 0, 0, 0, 0, 0),
0, 0, 0, 0, 0),
CPCAP_REG(SW2, CPCAP_REG_S2C1, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW2_SEL, sw2_sw4_val_tbl,
0xf00, 0x7f, 0, 0x800, 0, 120),
0xf00, 0x7f, 0x800, 0, 120),
CPCAP_REG(SW3, CPCAP_REG_S3C, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW3_SEL, unknown_val_tbl,
0, 0, 0, 0, 0, 0),
0, 0, 0, 0, 0),
CPCAP_REG(SW4, CPCAP_REG_S4C1, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW4_SEL, sw2_sw4_val_tbl,
0xf00, 0x7f, 0, 0x900, 0, 100),
0xf00, 0x7f, 0x900, 0, 100),
CPCAP_REG(SW5, CPCAP_REG_S5C, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW5_SEL, sw5_val_tbl,
0x2a, 0, 0, 0x22, 0, 0),
0x2a, 0, 0x22, 0, 0),
CPCAP_REG(SW6, CPCAP_REG_S6C, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW6_SEL, unknown_val_tbl,
0, 0, 0, 0, 0, 0),
0, 0, 0, 0, 0),
CPCAP_REG(VCAM, CPCAP_REG_VCAMC, CPCAP_REG_ASSIGN2,
CPCAP_BIT_VCAM_SEL, vcam_val_tbl,
0x87, 0x30, 4, 0x7, 0, 420),
0x87, 0x30, 0x7, 0, 420),
CPCAP_REG(VCSI, CPCAP_REG_VCSIC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VCSI_SEL, vcsi_val_tbl,
0x47, 0x10, 4, 0x7, 0, 350),
0x47, 0x10, 0x7, 0, 350),
CPCAP_REG(VDAC, CPCAP_REG_VDACC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VDAC_SEL, vdac_val_tbl,
0x87, 0x30, 4, 0x3, 0, 420),
0x87, 0x30, 0x3, 0, 420),
CPCAP_REG(VDIG, CPCAP_REG_VDIGC, CPCAP_REG_ASSIGN2,
CPCAP_BIT_VDIG_SEL, vdig_val_tbl,
0x87, 0x30, 4, 0x5, 0, 420),
0x87, 0x30, 0x5, 0, 420),
CPCAP_REG(VFUSE, CPCAP_REG_VFUSEC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VFUSE_SEL, vfuse_val_tbl,
0x80, 0xf, 0, 0x80, 0, 420),
0x80, 0xf, 0x80, 0, 420),
CPCAP_REG(VHVIO, CPCAP_REG_VHVIOC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VHVIO_SEL, vhvio_val_tbl,
0x17, 0, 0, 0x2, 0, 0),
0x17, 0, 0x2, 0, 0),
CPCAP_REG(VSDIO, CPCAP_REG_VSDIOC, CPCAP_REG_ASSIGN2,
CPCAP_BIT_VSDIO_SEL, vsdio_val_tbl,
0x87, 0x38, 3, 0x2, 0, 420),
0x87, 0x38, 0x2, 0, 420),
CPCAP_REG(VPLL, CPCAP_REG_VPLLC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VPLL_SEL, vpll_val_tbl,
0x43, 0x18, 3, 0x1, 0, 420),
0x43, 0x18, 0x1, 0, 420),
CPCAP_REG(VRF1, CPCAP_REG_VRF1C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VRF1_SEL, vrf1_val_tbl,
0xac, 0x2, 1, 0xc, 0, 10),
0xac, 0x2, 0xc, 0, 10),
CPCAP_REG(VRF2, CPCAP_REG_VRF2C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VRF2_SEL, vrf2_val_tbl,
0x23, 0x8, 3, 0x3, 0, 10),
0x23, 0x8, 0x3, 0, 10),
CPCAP_REG(VRFREF, CPCAP_REG_VRFREFC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VRFREF_SEL, vrfref_val_tbl,
0x23, 0x8, 3, 0x3, 0, 420),
0x23, 0x8, 0x3, 0, 420),
CPCAP_REG(VWLAN1, CPCAP_REG_VWLAN1C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VWLAN1_SEL, vwlan1_val_tbl,
0x47, 0x10, 4, 0x5, 0, 420),
0x47, 0x10, 0x5, 0, 420),
CPCAP_REG(VWLAN2, CPCAP_REG_VWLAN2C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VWLAN2_SEL, vwlan2_val_tbl,
0x20c, 0xc0, 6, 0x8, 0, 420),
0x20c, 0xc0, 0x8, 0, 420),
CPCAP_REG(VSIM, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
0xffff, vsim_val_tbl,
0x23, 0x8, 3, 0x3, 0, 420),
0x23, 0x8, 0x3, 0, 420),
CPCAP_REG(VSIMCARD, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
0xffff, vsimcard_val_tbl,
0x1e80, 0x8, 3, 0x1e00, 0, 420),
0x1e80, 0x8, 0x1e00, 0, 420),
CPCAP_REG(VVIB, CPCAP_REG_VVIBC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VVIB_SEL, vvib_val_tbl,
0x1, 0xc, 2, 0, 0x1, 500),
0x1, 0xc, 0, 0x1, 500),
CPCAP_REG(VUSB, CPCAP_REG_VUSBC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VUSB_SEL, vusb_val_tbl,
0x11c, 0x40, 6, 0xc, 0, 0),
0x11c, 0x40, 0xc, 0, 0),
CPCAP_REG(VAUDIO, CPCAP_REG_VAUDIOC, CPCAP_REG_ASSIGN4,
CPCAP_BIT_VAUDIO_SEL, vaudio_val_tbl,
0x16, 0x1, 0, 0x4, 0, 0),
0x16, 0x1, 0x4, 0, 0),
{ /* sentinel */ },
};

64
drivers/regulator/da9052-regulator.c
View File

@ -290,10 +290,10 @@ static const struct regulator_ops da9052_ldo_ops = {
.disable = regulator_disable_regmap,
};
#define DA9052_LDO(_id, step, min, max, sbits, ebits, abits) \
#define DA9052_LDO(_id, _name, step, min, max, sbits, ebits, abits) \
{\
.reg_desc = {\
.name = #_id,\
.name = #_name,\
.ops = &da9052_ldo_ops,\
.type = REGULATOR_VOLTAGE,\
.id = DA9052_ID_##_id,\
@ -310,10 +310,10 @@ static const struct regulator_ops da9052_ldo_ops = {
.activate_bit = (abits),\
}
#define DA9052_DCDC(_id, step, min, max, sbits, ebits, abits) \
#define DA9052_DCDC(_id, _name, step, min, max, sbits, ebits, abits) \
{\
.reg_desc = {\
.name = #_id,\
.name = #_name,\
.ops = &da9052_dcdc_ops,\
.type = REGULATOR_VOLTAGE,\
.id = DA9052_ID_##_id,\
@ -331,37 +331,37 @@ static const struct regulator_ops da9052_ldo_ops = {
}
static struct da9052_regulator_info da9052_regulator_info[] = {
DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO),
DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO),
DA9052_DCDC(BUCK3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO),
DA9052_DCDC(BUCK4, 50, 1800, 3600, 5, 6, 0),
DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0),
DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
DA9052_LDO(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
DA9052_LDO(LDO4, 25, 1725, 3300, 6, 6, 0),
DA9052_LDO(LDO5, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO6, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO7, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO8, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO9, 50, 1250, 3650, 6, 6, 0),
DA9052_LDO(LDO10, 50, 1200, 3600, 6, 6, 0),
DA9052_DCDC(BUCK1, buck1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO),
DA9052_DCDC(BUCK2, buck2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO),
DA9052_DCDC(BUCK3, buck3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO),
DA9052_DCDC(BUCK4, buck4, 50, 1800, 3600, 5, 6, 0),
DA9052_LDO(LDO1, ldo1, 50, 600, 1800, 5, 6, 0),
DA9052_LDO(LDO2, ldo2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
DA9052_LDO(LDO3, ldo3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
DA9052_LDO(LDO4, ldo4, 25, 1725, 3300, 6, 6, 0),
DA9052_LDO(LDO5, ldo5, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO6, ldo6, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO7, ldo7, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO8, ldo8, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO9, ldo9, 50, 1250, 3650, 6, 6, 0),
DA9052_LDO(LDO10, ldo10, 50, 1200, 3600, 6, 6, 0),
};
static struct da9052_regulator_info da9053_regulator_info[] = {
DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO),
DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO),
DA9052_DCDC(BUCK3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO),
DA9052_DCDC(BUCK4, 25, 950, 2525, 6, 6, 0),
DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0),
DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
DA9052_LDO(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
DA9052_LDO(LDO4, 25, 1725, 3300, 6, 6, 0),
DA9052_LDO(LDO5, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO6, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO7, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO8, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO9, 50, 1250, 3650, 6, 6, 0),
DA9052_LDO(LDO10, 50, 1200, 3600, 6, 6, 0),
DA9052_DCDC(BUCK1, buck1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO),
DA9052_DCDC(BUCK2, buck2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO),
DA9052_DCDC(BUCK3, buck3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO),
DA9052_DCDC(BUCK4, buck4, 25, 950, 2525, 6, 6, 0),
DA9052_LDO(LDO1, ldo1, 50, 600, 1800, 5, 6, 0),
DA9052_LDO(LDO2, ldo2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
DA9052_LDO(LDO3, ldo3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
DA9052_LDO(LDO4, ldo4, 25, 1725, 3300, 6, 6, 0),
DA9052_LDO(LDO5, ldo5, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO6, ldo6, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO7, ldo7, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO8, ldo8, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO9, ldo9, 50, 1250, 3650, 6, 6, 0),
DA9052_LDO(LDO10, ldo10, 50, 1200, 3600, 6, 6, 0),
};
static inline struct da9052_regulator_info *find_regulator_info(u8 chip_id,

46
drivers/regulator/da9055-regulator.c
View File

@ -48,7 +48,9 @@
#define DA9055_ID_LDO6 7
/* DA9055 BUCK current limit */
static const int da9055_current_limits[] = { 500000, 600000, 700000, 800000 };
static const unsigned int da9055_current_limits[] = {
500000, 600000, 700000, 800000
};
struct da9055_conf_reg {
int reg;
@ -169,39 +171,6 @@ static int da9055_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
val << volt.sl_shift);
}
static int da9055_buck_get_current_limit(struct regulator_dev *rdev)
{
struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
struct da9055_regulator_info *info = regulator->info;
int ret;
ret = da9055_reg_read(regulator->da9055, DA9055_REG_BUCK_LIM);
if (ret < 0)
return ret;
ret &= info->mode.mask;
return da9055_current_limits[ret >> info->mode.shift];
}
static int da9055_buck_set_current_limit(struct regulator_dev *rdev, int min_uA,
int max_uA)
{
struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
struct da9055_regulator_info *info = regulator->info;
int i;
for (i = ARRAY_SIZE(da9055_current_limits) - 1; i >= 0; i--) {
if ((min_uA <= da9055_current_limits[i]) &&
(da9055_current_limits[i] <= max_uA))
return da9055_reg_update(regulator->da9055,
DA9055_REG_BUCK_LIM,
info->mode.mask,
i << info->mode.shift);
}
return -EINVAL;
}
static int da9055_regulator_get_voltage_sel(struct regulator_dev *rdev)
{
struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
@ -329,8 +298,8 @@ static const struct regulator_ops da9055_buck_ops = {
.get_mode = da9055_buck_get_mode,
.set_mode = da9055_buck_set_mode,
.get_current_limit = da9055_buck_get_current_limit,
.set_current_limit = da9055_buck_set_current_limit,
.get_current_limit = regulator_get_current_limit_regmap,
.set_current_limit = regulator_set_current_limit_regmap,
.get_voltage_sel = da9055_regulator_get_voltage_sel,
.set_voltage_sel = da9055_regulator_set_voltage_sel,
@ -407,6 +376,10 @@ static const struct regulator_ops da9055_ldo_ops = {
.uV_step = (step) * 1000,\
.linear_min_sel = (voffset),\
.owner = THIS_MODULE,\
.curr_table = da9055_current_limits,\
.n_current_limits = ARRAY_SIZE(da9055_current_limits),\
.csel_reg = DA9055_REG_BUCK_LIM,\
.csel_mask = (mbits),\
},\
.conf = {\
.reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
@ -457,7 +430,6 @@ static int da9055_gpio_init(struct da9055_regulator *regulator,
int gpio_mux = pdata->gpio_ren[id];
config->ena_gpiod = pdata->ena_gpiods[id];
config->ena_gpio_invert = 1;
/*
* GPI pin is muxed with regulator to control the

37
drivers/regulator/da9062-regulator.c
View File

@ -126,7 +126,7 @@ static int da9062_set_current_limit(struct regulator_dev *rdev,
const struct da9062_regulator_info *rinfo = regl->info;
int n, tval;
for (n = 0; n < rinfo->n_current_limits; n++) {
for (n = rinfo->n_current_limits - 1; n >= 0; n--) {
tval = rinfo->current_limits[n];
if (tval >= min_ua && tval <= max_ua)
return regmap_field_write(regl->ilimit, n);
@ -992,7 +992,6 @@ static int da9062_regulator_probe(struct platform_device *pdev)
struct regulator_config config = { };
const struct da9062_regulator_info *rinfo;
int irq, n, ret;
size_t size;
int max_regulators;
switch (chip->chip_type) {
@ -1010,9 +1009,8 @@ static int da9062_regulator_probe(struct platform_device *pdev)
}
/* Allocate memory required by usable regulators */
size = sizeof(struct da9062_regulators) +
max_regulators * sizeof(struct da9062_regulator);
regulators = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
regulators = devm_kzalloc(&pdev->dev, struct_size(regulators, regulator,
max_regulators), GFP_KERNEL);
if (!regulators)
return -ENOMEM;
@ -1029,31 +1027,50 @@ static int da9062_regulator_probe(struct platform_device *pdev)
regl->desc.type = REGULATOR_VOLTAGE;
regl->desc.owner = THIS_MODULE;
if (regl->info->mode.reg)
if (regl->info->mode.reg) {
regl->mode = devm_regmap_field_alloc(
&pdev->dev,
chip->regmap,
regl->info->mode);
if (regl->info->suspend.reg)
if (IS_ERR(regl->mode))
return PTR_ERR(regl->mode);
}
if (regl->info->suspend.reg) {
regl->suspend = devm_regmap_field_alloc(
&pdev->dev,
chip->regmap,
regl->info->suspend);
if (regl->info->sleep.reg)
if (IS_ERR(regl->suspend))
return PTR_ERR(regl->suspend);
}
if (regl->info->sleep.reg) {
regl->sleep = devm_regmap_field_alloc(
&pdev->dev,
chip->regmap,
regl->info->sleep);
if (regl->info->suspend_sleep.reg)
if (IS_ERR(regl->sleep))
return PTR_ERR(regl->sleep);
}
if (regl->info->suspend_sleep.reg) {
regl->suspend_sleep = devm_regmap_field_alloc(
&pdev->dev,
chip->regmap,
regl->info->suspend_sleep);
if (regl->info->ilimit.reg)
if (IS_ERR(regl->suspend_sleep))
return PTR_ERR(regl->suspend_sleep);
}
if (regl->info->ilimit.reg) {
regl->ilimit = devm_regmap_field_alloc(
&pdev->dev,
chip->regmap,
regl->info->ilimit);
if (IS_ERR(regl->ilimit))
return PTR_ERR(regl->ilimit);
}
/* Register regulator */
memset(&config, 0, sizeof(config));

37
drivers/regulator/da9063-regulator.c
View File

@ -167,7 +167,7 @@ static int da9063_set_current_limit(struct regulator_dev *rdev,
const struct da9063_regulator_info *rinfo = regl->info;
int n, tval;
for (n = 0; n < rinfo->n_current_limits; n++) {
for (n = rinfo->n_current_limits - 1; n >= 0; n--) {
tval = rinfo->current_limits[n];
if (tval >= min_uA && tval <= max_uA)
return regmap_field_write(regl->ilimit, n);
@ -739,7 +739,6 @@ static int da9063_regulator_probe(struct platform_device *pdev)
struct regulator_config config;
bool bcores_merged, bmem_bio_merged;
int id, irq, n, n_regulators, ret, val;
size_t size;
regl_pdata = da9063_pdata ? da9063_pdata->regulators_pdata : NULL;
@ -784,9 +783,8 @@ static int da9063_regulator_probe(struct platform_device *pdev)
n_regulators--; /* remove BMEM_BIO_MERGED */
/* Allocate memory required by usable regulators */
size = sizeof(struct da9063_regulators) +
n_regulators * sizeof(struct da9063_regulator);
regulators = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
regulators = devm_kzalloc(&pdev->dev, struct_size(regulators,
regulator, n_regulators), GFP_KERNEL);
if (!regulators)
return -ENOMEM;
@ -835,21 +833,40 @@ static int da9063_regulator_probe(struct platform_device *pdev)
regl->desc.type = REGULATOR_VOLTAGE;
regl->desc.owner = THIS_MODULE;
if (regl->info->mode.reg)
if (regl->info->mode.reg) {
regl->mode = devm_regmap_field_alloc(&pdev->dev,
da9063->regmap, regl->info->mode);
if (regl->info->suspend.reg)
if (IS_ERR(regl->mode))
return PTR_ERR(regl->mode);
}
if (regl->info->suspend.reg) {
regl->suspend = devm_regmap_field_alloc(&pdev->dev,
da9063->regmap, regl->info->suspend);
if (regl->info->sleep.reg)
if (IS_ERR(regl->suspend))
return PTR_ERR(regl->suspend);
}
if (regl->info->sleep.reg) {
regl->sleep = devm_regmap_field_alloc(&pdev->dev,
da9063->regmap, regl->info->sleep);
if (regl->info->suspend_sleep.reg)
if (IS_ERR(regl->sleep))
return PTR_ERR(regl->sleep);
}
if (regl->info->suspend_sleep.reg) {
regl->suspend_sleep = devm_regmap_field_alloc(&pdev->dev,
da9063->regmap, regl->info->suspend_sleep);
if (regl->info->ilimit.reg)
if (IS_ERR(regl->suspend_sleep))
return PTR_ERR(regl->suspend_sleep);
}
if (regl->info->ilimit.reg) {
regl->ilimit = devm_regmap_field_alloc(&pdev->dev,
da9063->regmap, regl->info->ilimit);
if (IS_ERR(regl->ilimit))
return PTR_ERR(regl->ilimit);
}
/* Register regulator */
memset(&config, 0, sizeof(config));

53
drivers/regulator/da9210-regulator.c
View File

@ -41,10 +41,6 @@ static const struct regmap_config da9210_regmap_config = {
.val_bits = 8,
};
static int da9210_set_current_limit(struct regulator_dev *rdev, int min_uA,
int max_uA);
static int da9210_get_current_limit(struct regulator_dev *rdev);
static const struct regulator_ops da9210_buck_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@ -52,8 +48,8 @@ static const struct regulator_ops da9210_buck_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
.set_current_limit = da9210_set_current_limit,
.get_current_limit = da9210_get_current_limit,
.set_current_limit = regulator_set_current_limit_regmap,
.get_current_limit = regulator_get_current_limit_regmap,
};
/* Default limits measured in millivolts and milliamps */
@ -62,7 +58,7 @@ static const struct regulator_ops da9210_buck_ops = {
#define DA9210_STEP_MV 10
/* Current limits for buck (uA) indices corresponds with register values */
static const int da9210_buck_limits[] = {
static const unsigned int da9210_buck_limits[] = {
1600000, 1800000, 2000000, 2200000, 2400000, 2600000, 2800000, 3000000,
3200000, 3400000, 3600000, 3800000, 4000000, 4200000, 4400000, 4600000
};
@ -80,47 +76,12 @@ static const struct regulator_desc da9210_reg = {
.enable_reg = DA9210_REG_BUCK_CONT,
.enable_mask = DA9210_BUCK_EN,
.owner = THIS_MODULE,
.curr_table = da9210_buck_limits,
.n_current_limits = ARRAY_SIZE(da9210_buck_limits),
.csel_reg = DA9210_REG_BUCK_ILIM,
.csel_mask = DA9210_BUCK_ILIM_MASK,
};
static int da9210_set_current_limit(struct regulator_dev *rdev, int min_uA,
int max_uA)
{
struct da9210 *chip = rdev_get_drvdata(rdev);
unsigned int sel;
int i;
/* search for closest to maximum */
for (i = ARRAY_SIZE(da9210_buck_limits)-1; i >= 0; i--) {
if (min_uA <= da9210_buck_limits[i] &&
max_uA >= da9210_buck_limits[i]) {
sel = i;
sel = sel << DA9210_BUCK_ILIM_SHIFT;
return regmap_update_bits(chip->regmap,
DA9210_REG_BUCK_ILIM,
DA9210_BUCK_ILIM_MASK, sel);
}
}
return -EINVAL;
}
static int da9210_get_current_limit(struct regulator_dev *rdev)
{
struct da9210 *chip = rdev_get_drvdata(rdev);
unsigned int data;
unsigned int sel;
int ret;
ret = regmap_read(chip->regmap, DA9210_REG_BUCK_ILIM, &data);
if (ret < 0)
return ret;
/* select one of 16 values: 0000 (1600mA) to 1111 (4600mA) */
sel = (data & DA9210_BUCK_ILIM_MASK) >> DA9210_BUCK_ILIM_SHIFT;
return da9210_buck_limits[sel];
}
static irqreturn_t da9210_irq_handler(int irq, void *data)
{
struct da9210 *chip = data;

109
drivers/regulator/fan53555.c
View File

@ -40,7 +40,6 @@
/* VSEL bit definitions */
#define VSEL_BUCK_EN (1 << 7)
#define VSEL_MODE (1 << 6)
#define VSEL_NSEL_MASK 0x3F
/* Chip ID and Verison */
#define DIE_ID 0x0F /* ID1 */
#define DIE_REV 0x0F /* ID2 */
@ -49,14 +48,26 @@
#define CTL_SLEW_MASK (0x7 << 4)
#define CTL_SLEW_SHIFT 4
#define CTL_RESET (1 << 2)
#define CTL_MODE_VSEL0_MODE BIT(0)
#define CTL_MODE_VSEL1_MODE BIT(1)
#define FAN53555_NVOLTAGES 64 /* Numbers of voltages */
#define FAN53526_NVOLTAGES 128
enum fan53555_vendor {
FAN53555_VENDOR_FAIRCHILD = 0,
FAN53526_VENDOR_FAIRCHILD = 0,
FAN53555_VENDOR_FAIRCHILD,
FAN53555_VENDOR_SILERGY,
};
enum {
FAN53526_CHIP_ID_01 = 1,
};
enum {
FAN53526_CHIP_REV_08 = 8,
};
/* IC Type */
enum {
FAN53555_CHIP_ID_00 = 0,
@ -94,8 +105,12 @@ struct fan53555_device_info {
/* Voltage range and step(linear) */
unsigned int vsel_min;
unsigned int vsel_step;
unsigned int vsel_count;
/* Voltage slew rate limiting */
unsigned int slew_rate;
/* Mode */
unsigned int mode_reg;
unsigned int mode_mask;
/* Sleep voltage cache */
unsigned int sleep_vol_cache;
};
@ -111,7 +126,7 @@ static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV)
if (ret < 0)
return ret;
ret = regmap_update_bits(di->regmap, di->sleep_reg,
VSEL_NSEL_MASK, ret);
di->desc.vsel_mask, ret);
if (ret < 0)
return ret;
/* Cache the sleep voltage setting.
@ -143,11 +158,11 @@ static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode)
switch (mode) {
case REGULATOR_MODE_FAST:
regmap_update_bits(di->regmap, di->vol_reg,
VSEL_MODE, VSEL_MODE);
regmap_update_bits(di->regmap, di->mode_reg,
di->mode_mask, di->mode_mask);
break;
case REGULATOR_MODE_NORMAL:
regmap_update_bits(di->regmap, di->vol_reg, VSEL_MODE, 0);
regmap_update_bits(di->regmap, di->vol_reg, di->mode_mask, 0);
break;
default:
return -EINVAL;
@ -161,10 +176,10 @@ static unsigned int fan53555_get_mode(struct regulator_dev *rdev)
unsigned int val;
int ret = 0;
ret = regmap_read(di->regmap, di->vol_reg, &val);
ret = regmap_read(di->regmap, di->mode_reg, &val);
if (ret < 0)
return ret;
if (val & VSEL_MODE)
if (val & di->mode_mask)
return REGULATOR_MODE_FAST;
else
return REGULATOR_MODE_NORMAL;
@ -219,6 +234,34 @@ static const struct regulator_ops fan53555_regulator_ops = {
.set_suspend_disable = fan53555_set_suspend_disable,
};
static int fan53526_voltages_setup_fairchild(struct fan53555_device_info *di)
{
/* Init voltage range and step */
switch (di->chip_id) {
case FAN53526_CHIP_ID_01:
switch (di->chip_rev) {
case FAN53526_CHIP_REV_08:
di->vsel_min = 600000;
di->vsel_step = 6250;
break;
default:
dev_err(di->dev,
"Chip ID %d with rev %d not supported!\n",
di->chip_id, di->chip_rev);
return -EINVAL;
}
break;
default:
dev_err(di->dev,
"Chip ID %d not supported!\n", di->chip_id);
return -EINVAL;
}
di->vsel_count = FAN53526_NVOLTAGES;
return 0;
}
static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
{
/* Init voltage range and step */
@ -257,6 +300,8 @@ static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
return -EINVAL;
}
di->vsel_count = FAN53555_NVOLTAGES;
return 0;
}
@ -274,6 +319,8 @@ static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
return -EINVAL;
}
di->vsel_count = FAN53555_NVOLTAGES;
return 0;
}
@ -302,7 +349,35 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
return -EINVAL;
}
/* Setup mode control register */
switch (di->vendor) {
case FAN53526_VENDOR_FAIRCHILD:
di->mode_reg = FAN53555_CONTROL;
switch (pdata->sleep_vsel_id) {
case FAN53555_VSEL_ID_0:
di->mode_mask = CTL_MODE_VSEL1_MODE;
break;
case FAN53555_VSEL_ID_1:
di->mode_mask = CTL_MODE_VSEL0_MODE;
break;
}
break;
case FAN53555_VENDOR_FAIRCHILD:
case FAN53555_VENDOR_SILERGY:
di->mode_reg = di->vol_reg;
di->mode_mask = VSEL_MODE;
break;
default:
dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
return -EINVAL;
}
/* Setup voltage range */
switch (di->vendor) {
case FAN53526_VENDOR_FAIRCHILD:
ret = fan53526_voltages_setup_fairchild(di);
break;
case FAN53555_VENDOR_FAIRCHILD:
ret = fan53555_voltages_setup_fairchild(di);
break;
@ -326,13 +401,13 @@ static int fan53555_regulator_register(struct fan53555_device_info *di,
rdesc->supply_name = "vin";
rdesc->ops = &fan53555_regulator_ops;
rdesc->type = REGULATOR_VOLTAGE;
rdesc->n_voltages = FAN53555_NVOLTAGES;
rdesc->n_voltages = di->vsel_count;
rdesc->enable_reg = di->vol_reg;
rdesc->enable_mask = VSEL_BUCK_EN;
rdesc->min_uV = di->vsel_min;
rdesc->uV_step = di->vsel_step;
rdesc->vsel_reg = di->vol_reg;
rdesc->vsel_mask = VSEL_NSEL_MASK;
rdesc->vsel_mask = di->vsel_count - 1;
rdesc->owner = THIS_MODULE;
di->rdev = devm_regulator_register(di->dev, &di->desc, config);
@ -368,6 +443,9 @@ static struct fan53555_platform_data *fan53555_parse_dt(struct device *dev,
static const struct of_device_id fan53555_dt_ids[] = {
{
.compatible = "fcs,fan53526",
.data = (void *)FAN53526_VENDOR_FAIRCHILD,
}, {
.compatible = "fcs,fan53555",
.data = (void *)FAN53555_VENDOR_FAIRCHILD
}, {
@ -412,11 +490,13 @@ static int fan53555_regulator_probe(struct i2c_client *client,
} else {
/* if no ramp constraint set, get the pdata ramp_delay */
if (!di->regulator->constraints.ramp_delay) {
int slew_idx = (pdata->slew_rate & 0x7)
? pdata->slew_rate : 0;
if (pdata->slew_rate >= ARRAY_SIZE(slew_rates)) {
dev_err(&client->dev, "Invalid slew_rate\n");
return -EINVAL;
}
di->regulator->constraints.ramp_delay
= slew_rates[slew_idx];
= slew_rates[pdata->slew_rate];
}
di->vendor = id->driver_data;
@ -467,6 +547,9 @@ static int fan53555_regulator_probe(struct i2c_client *client,
static const struct i2c_device_id fan53555_id[] = {
{
.name = "fan53526",
.driver_data = FAN53526_VENDOR_FAIRCHILD
}, {
.name = "fan53555",
.driver_data = FAN53555_VENDOR_FAIRCHILD
}, {

35
drivers/regulator/fixed.c
View File

@ -79,15 +79,6 @@ of_get_fixed_voltage_config(struct device *dev,
of_property_read_u32(np, "startup-delay-us", &config->startup_delay);
/*
* FIXME: we pulled active low/high and open drain handling into
* gpiolib so it will be handled there. Delete this in the second
* step when we also remove the custom inversion handling for all
* legacy boardfiles.
*/
config->enable_high = 1;
config->gpio_is_open_drain = 0;
if (of_find_property(np, "vin-supply", NULL))
config->input_supply = "vin";
@ -151,24 +142,14 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
drvdata->desc.fixed_uV = config->microvolts;
cfg.ena_gpio_invert = !config->enable_high;
if (config->enabled_at_boot) {
if (config->enable_high)
gflags = GPIOD_OUT_HIGH;
else
gflags = GPIOD_OUT_LOW;
} else {
if (config->enable_high)
gflags = GPIOD_OUT_LOW;
else
gflags = GPIOD_OUT_HIGH;
}
if (config->gpio_is_open_drain) {
if (gflags == GPIOD_OUT_HIGH)
gflags = GPIOD_OUT_HIGH_OPEN_DRAIN;
else
gflags = GPIOD_OUT_LOW_OPEN_DRAIN;
}
/*
* The signal will be inverted by the GPIO core if flagged so in the
* decriptor.
*/
if (config->enabled_at_boot)
gflags = GPIOD_OUT_HIGH;
else
gflags = GPIOD_OUT_LOW;
/*
* Some fixed regulators share the enable line between two

194
drivers/regulator/gpio-regulator.c
View File

@ -30,16 +30,15 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/gpio-regulator.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
struct gpio_regulator_data {
struct regulator_desc desc;
struct regulator_dev *dev;
struct gpio *gpios;
struct gpio_desc **gpiods;
int nr_gpios;
struct gpio_regulator_state *states;
@ -82,7 +81,7 @@ static int gpio_regulator_set_voltage(struct regulator_dev *dev,
for (ptr = 0; ptr < data->nr_gpios; ptr++) {
state = (target & (1 << ptr)) >> ptr;
gpio_set_value_cansleep(data->gpios[ptr].gpio, state);
gpiod_set_value_cansleep(data->gpiods[ptr], state);
}
data->state = target;
@ -119,7 +118,7 @@ static int gpio_regulator_set_current_limit(struct regulator_dev *dev,
for (ptr = 0; ptr < data->nr_gpios; ptr++) {
state = (target & (1 << ptr)) >> ptr;
gpio_set_value_cansleep(data->gpios[ptr].gpio, state);
gpiod_set_value_cansleep(data->gpiods[ptr], state);
}
data->state = target;
@ -138,7 +137,8 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np,
{
struct gpio_regulator_config *config;
const char *regtype;
int proplen, gpio, i;
int proplen, i;
int ngpios;
int ret;
config = devm_kzalloc(dev,
@ -153,59 +153,36 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np,
config->supply_name = config->init_data->constraints.name;
if (of_property_read_bool(np, "enable-active-high"))
config->enable_high = true;
if (of_property_read_bool(np, "enable-at-boot"))
config->enabled_at_boot = true;
of_property_read_u32(np, "startup-delay-us", &config->startup_delay);
config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);
if (config->enable_gpio < 0 && config->enable_gpio != -ENOENT)
return ERR_PTR(config->enable_gpio);
/* Fetch GPIOs. - optional property*/
ret = of_gpio_count(np);
if ((ret < 0) && (ret != -ENOENT))
return ERR_PTR(ret);
if (ret > 0) {
config->nr_gpios = ret;
config->gpios = devm_kcalloc(dev,
config->nr_gpios, sizeof(struct gpio),
GFP_KERNEL);
if (!config->gpios)
/* Fetch GPIO init levels */
ngpios = gpiod_count(dev, NULL);
if (ngpios > 0) {
config->gflags = devm_kzalloc(dev,
sizeof(enum gpiod_flags)
* ngpios,
GFP_KERNEL);
if (!config->gflags)
return ERR_PTR(-ENOMEM);
proplen = of_property_count_u32_elems(np, "gpios-states");
/* optional property */
if (proplen < 0)
proplen = 0;
for (i = 0; i < ngpios; i++) {
u32 val;
if (proplen > 0 && proplen != config->nr_gpios) {
dev_warn(dev, "gpios <-> gpios-states mismatch\n");
proplen = 0;
}
ret = of_property_read_u32_index(np, "gpios-states", i,
&val);
for (i = 0; i < config->nr_gpios; i++) {
gpio = of_get_named_gpio(np, "gpios", i);
if (gpio < 0) {
if (gpio != -ENOENT)
return ERR_PTR(gpio);
break;
}
config->gpios[i].gpio = gpio;
config->gpios[i].label = config->supply_name;
if (proplen > 0) {
of_property_read_u32_index(np, "gpios-states",
i, &ret);
if (ret)
config->gpios[i].flags =
GPIOF_OUT_INIT_HIGH;
}
/* Default to high per specification */
if (ret)
config->gflags[i] = GPIOD_OUT_HIGH;
else
config->gflags[i] =
val ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
}
}
config->ngpios = ngpios;
/* Fetch states. */
proplen = of_property_count_u32_elems(np, "states");
@ -251,59 +228,56 @@ static struct regulator_ops gpio_regulator_current_ops = {
static int gpio_regulator_probe(struct platform_device *pdev)
{
struct gpio_regulator_config *config = dev_get_platdata(&pdev->dev);
struct device_node *np = pdev->dev.of_node;
struct device *dev = &pdev->dev;
struct gpio_regulator_config *config = dev_get_platdata(dev);
struct device_node *np = dev->of_node;
struct gpio_regulator_data *drvdata;
struct regulator_config cfg = { };
int ptr, ret, state;
enum gpiod_flags gflags;
int ptr, ret, state, i;
drvdata = devm_kzalloc(&pdev->dev, sizeof(struct gpio_regulator_data),
drvdata = devm_kzalloc(dev, sizeof(struct gpio_regulator_data),
GFP_KERNEL);
if (drvdata == NULL)
return -ENOMEM;
if (np) {
config = of_get_gpio_regulator_config(&pdev->dev, np,
config = of_get_gpio_regulator_config(dev, np,
&drvdata->desc);
if (IS_ERR(config))
return PTR_ERR(config);
}
drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
drvdata->desc.name = devm_kstrdup(dev, config->supply_name, GFP_KERNEL);
if (drvdata->desc.name == NULL) {
dev_err(&pdev->dev, "Failed to allocate supply name\n");
dev_err(dev, "Failed to allocate supply name\n");
return -ENOMEM;
}
if (config->nr_gpios != 0) {
drvdata->gpios = kmemdup(config->gpios,
config->nr_gpios * sizeof(struct gpio),
GFP_KERNEL);
if (drvdata->gpios == NULL) {
dev_err(&pdev->dev, "Failed to allocate gpio data\n");
ret = -ENOMEM;
goto err_name;
}
drvdata->nr_gpios = config->nr_gpios;
ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios);
if (ret) {
if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev,
"Could not obtain regulator setting GPIOs: %d\n",
ret);
goto err_memgpio;
}
drvdata->gpiods = devm_kzalloc(dev, sizeof(struct gpio_desc *),
GFP_KERNEL);
if (!drvdata->gpiods)
return -ENOMEM;
for (i = 0; i < config->ngpios; i++) {
drvdata->gpiods[i] = devm_gpiod_get_index(dev,
NULL,
i,
config->gflags[i]);
if (IS_ERR(drvdata->gpiods[i]))
return PTR_ERR(drvdata->gpiods[i]);
/* This is good to know */
gpiod_set_consumer_name(drvdata->gpiods[i], drvdata->desc.name);
}
drvdata->nr_gpios = config->ngpios;
drvdata->states = kmemdup(config->states,
config->nr_states *
sizeof(struct gpio_regulator_state),
GFP_KERNEL);
drvdata->states = devm_kmemdup(dev,
config->states,
config->nr_states *
sizeof(struct gpio_regulator_state),
GFP_KERNEL);
if (drvdata->states == NULL) {
dev_err(&pdev->dev, "Failed to allocate state data\n");
ret = -ENOMEM;
goto err_stategpio;
dev_err(dev, "Failed to allocate state data\n");
return -ENOMEM;
}
drvdata->nr_states = config->nr_states;
@ -322,61 +296,46 @@ static int gpio_regulator_probe(struct platform_device *pdev)
drvdata->desc.ops = &gpio_regulator_current_ops;
break;
default:
dev_err(&pdev->dev, "No regulator type set\n");
ret = -EINVAL;
goto err_memstate;
dev_err(dev, "No regulator type set\n");
return -EINVAL;
}
/* build initial state from gpio init data. */
state = 0;
for (ptr = 0; ptr < drvdata->nr_gpios; ptr++) {
if (config->gpios[ptr].flags & GPIOF_OUT_INIT_HIGH)
if (config->gflags[ptr] == GPIOD_OUT_HIGH)
state |= (1 << ptr);
}
drvdata->state = state;
cfg.dev = &pdev->dev;
cfg.dev = dev;
cfg.init_data = config->init_data;
cfg.driver_data = drvdata;
cfg.of_node = np;
if (gpio_is_valid(config->enable_gpio)) {
cfg.ena_gpio = config->enable_gpio;
cfg.ena_gpio_initialized = true;
}
cfg.ena_gpio_invert = !config->enable_high;
if (config->enabled_at_boot) {
if (config->enable_high)
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
else
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
} else {
if (config->enable_high)
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
else
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
}
/*
* The signal will be inverted by the GPIO core if flagged so in the
* decriptor.
*/
if (config->enabled_at_boot)
gflags = GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE;
else
gflags = GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE;
cfg.ena_gpiod = gpiod_get_optional(dev, "enable", gflags);
if (IS_ERR(cfg.ena_gpiod))
return PTR_ERR(cfg.ena_gpiod);
drvdata->dev = regulator_register(&drvdata->desc, &cfg);
if (IS_ERR(drvdata->dev)) {
ret = PTR_ERR(drvdata->dev);
dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
goto err_memstate;
dev_err(dev, "Failed to register regulator: %d\n", ret);
return ret;
}
platform_set_drvdata(pdev, drvdata);
return 0;
err_memstate:
kfree(drvdata->states);
err_stategpio:
gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
err_memgpio:
kfree(drvdata->gpios);
err_name:
kfree(drvdata->desc.name);
return ret;
}
static int gpio_regulator_remove(struct platform_device *pdev)
@ -385,13 +344,6 @@ static int gpio_regulator_remove(struct platform_device *pdev)
regulator_unregister(drvdata->dev);
gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
kfree(drvdata->states);
kfree(drvdata->gpios);
kfree(drvdata->desc.name);
return 0;
}

147
drivers/regulator/helpers.c
View File

@ -593,6 +593,45 @@ int regulator_list_voltage_pickable_linear_range(struct regulator_dev *rdev,
}
EXPORT_SYMBOL_GPL(regulator_list_voltage_pickable_linear_range);
/**
* regulator_desc_list_voltage_linear_range - List voltages for linear ranges
*
* @desc: Regulator desc for regulator which volatges are to be listed
* @selector: Selector to convert into a voltage
*
* Regulators with a series of simple linear mappings between voltages
* and selectors who have set linear_ranges in the regulator descriptor
* can use this function prior regulator registration to list voltages.
* This is useful when voltages need to be listed during device-tree
* parsing.
*/
int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc,
unsigned int selector)
{
const struct regulator_linear_range *range;
int i;
if (!desc->n_linear_ranges) {
BUG_ON(!desc->n_linear_ranges);
return -EINVAL;
}
for (i = 0; i < desc->n_linear_ranges; i++) {
range = &desc->linear_ranges[i];
if (!(selector >= range->min_sel &&
selector <= range->max_sel))
continue;
selector -= range->min_sel;
return range->min_uV + (range->uV_step * selector);
}
return -EINVAL;
}
EXPORT_SYMBOL_GPL(regulator_desc_list_voltage_linear_range);
/**
* regulator_list_voltage_linear_range - List voltages for linear ranges
*
@ -606,27 +645,7 @@ EXPORT_SYMBOL_GPL(regulator_list_voltage_pickable_linear_range);
int regulator_list_voltage_linear_range(struct regulator_dev *rdev,
unsigned int selector)
{
const struct regulator_linear_range *range;
int i;
if (!rdev->desc->n_linear_ranges) {
BUG_ON(!rdev->desc->n_linear_ranges);
return -EINVAL;
}
for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
range = &rdev->desc->linear_ranges[i];
if (!(selector >= range->min_sel &&
selector <= range->max_sel))
continue;
selector -= range->min_sel;
return range->min_uV + (range->uV_step * selector);
}
return -EINVAL;
return regulator_desc_list_voltage_linear_range(rdev->desc, selector);
}
EXPORT_SYMBOL_GPL(regulator_list_voltage_linear_range);
@ -761,3 +780,89 @@ int regulator_set_active_discharge_regmap(struct regulator_dev *rdev,
rdev->desc->active_discharge_mask, val);
}
EXPORT_SYMBOL_GPL(regulator_set_active_discharge_regmap);
/**
* regulator_set_current_limit_regmap - set_current_limit for regmap users
*
* @rdev: regulator to operate on
* @min_uA: Lower bound for current limit
* @max_uA: Upper bound for current limit
*
* Regulators that use regmap for their register I/O can set curr_table,
* csel_reg and csel_mask fields in their descriptor and then use this
* as their set_current_limit operation, saving some code.
*/
int regulator_set_current_limit_regmap(struct regulator_dev *rdev,
int min_uA, int max_uA)
{
unsigned int n_currents = rdev->desc->n_current_limits;
int i, sel = -1;
if (n_currents == 0)
return -EINVAL;
if (rdev->desc->curr_table) {
const unsigned int *curr_table = rdev->desc->curr_table;
bool ascend = curr_table[n_currents - 1] > curr_table[0];
/* search for closest to maximum */
if (ascend) {
for (i = n_currents - 1; i >= 0; i--) {
if (min_uA <= curr_table[i] &&
curr_table[i] <= max_uA) {
sel = i;
break;
}
}
} else {
for (i = 0; i < n_currents; i++) {
if (min_uA <= curr_table[i] &&
curr_table[i] <= max_uA) {
sel = i;
break;
}
}
}
}
if (sel < 0)
return -EINVAL;
sel <<= ffs(rdev->desc->csel_mask) - 1;
return regmap_update_bits(rdev->regmap, rdev->desc->csel_reg,
rdev->desc->csel_mask, sel);
}
EXPORT_SYMBOL_GPL(regulator_set_current_limit_regmap);
/**
* regulator_get_current_limit_regmap - get_current_limit for regmap users
*
* @rdev: regulator to operate on
*
* Regulators that use regmap for their register I/O can set the
* csel_reg and csel_mask fields in their descriptor and then use this
* as their get_current_limit operation, saving some code.
*/
int regulator_get_current_limit_regmap(struct regulator_dev *rdev)
{
unsigned int val;
int ret;
ret = regmap_read(rdev->regmap, rdev->desc->csel_reg, &val);
if (ret != 0)
return ret;
val &= rdev->desc->csel_mask;
val >>= ffs(rdev->desc->csel_mask) - 1;
if (rdev->desc->curr_table) {
if (val >= rdev->desc->n_current_limits)
return -EINVAL;
return rdev->desc->curr_table[val];
}
return -EINVAL;
}
EXPORT_SYMBOL_GPL(regulator_get_current_limit_regmap);

1
drivers/regulator/hi655x-regulator.c
View File

@ -28,7 +28,6 @@
struct hi655x_regulator {
unsigned int disable_reg;
unsigned int status_reg;
unsigned int ctrl_regs;
unsigned int ctrl_mask;
struct regulator_desc rdesc;
};

13
drivers/regulator/isl6271a-regulator.c
View File

@ -31,7 +31,6 @@
/* PMIC details */
struct isl_pmic {
struct i2c_client *client;
struct regulator_dev *rdev[3];
struct mutex mtx;
};
@ -66,14 +65,14 @@ static int isl6271a_set_voltage_sel(struct regulator_dev *dev,
return err;
}
static struct regulator_ops isl_core_ops = {
static const struct regulator_ops isl_core_ops = {
.get_voltage_sel = isl6271a_get_voltage_sel,
.set_voltage_sel = isl6271a_set_voltage_sel,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
};
static struct regulator_ops isl_fixed_ops = {
static const struct regulator_ops isl_fixed_ops = {
.list_voltage = regulator_list_voltage_linear,
};
@ -109,6 +108,7 @@ static const struct regulator_desc isl_rd[] = {
static int isl6271a_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct regulator_dev *rdev;
struct regulator_config config = { };
struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev);
struct isl_pmic *pmic;
@ -133,11 +133,10 @@ static int isl6271a_probe(struct i2c_client *i2c,
config.init_data = NULL;
config.driver_data = pmic;
pmic->rdev[i] = devm_regulator_register(&i2c->dev, &isl_rd[i],
&config);
if (IS_ERR(pmic->rdev[i])) {
rdev = devm_regulator_register(&i2c->dev, &isl_rd[i], &config);
if (IS_ERR(rdev)) {
dev_err(&i2c->dev, "failed to register %s\n", id->name);
return PTR_ERR(pmic->rdev[i]);
return PTR_ERR(rdev);
}
}

6
drivers/regulator/lm363x-regulator.c
View File

@ -258,6 +258,9 @@ static int lm363x_regulator_probe(struct platform_device *pdev)
* Register update is required if the pin is used.
*/
gpiod = lm363x_regulator_of_get_enable_gpio(dev, id);
if (IS_ERR(gpiod))
return PTR_ERR(gpiod);
if (gpiod) {
cfg.ena_gpiod = gpiod;
@ -265,8 +268,7 @@ static int lm363x_regulator_probe(struct platform_device *pdev)
LM3632_EXT_EN_MASK,
LM3632_EXT_EN_MASK);
if (ret) {
if (gpiod)
gpiod_put(gpiod);
gpiod_put(gpiod);
dev_err(dev, "External pin err: %d\n", ret);
return ret;
}

7
drivers/regulator/lochnagar-regulator.c
View File

@ -194,7 +194,7 @@ static const struct regulator_desc lochnagar_regulators[] = {
.name = "VDDCORE",
.supply_name = "SYSVDD",
.type = REGULATOR_VOLTAGE,
.n_voltages = 57,
.n_voltages = 66,
.ops = &lochnagar_vddcore_ops,
.id = LOCHNAGAR_VDDCORE,
@ -226,14 +226,15 @@ static const struct of_device_id lochnagar_of_match[] = {
},
{
.compatible = "cirrus,lochnagar2-mic2vdd",
.data = &lochnagar_regulators[LOCHNAGAR_MIC1VDD],
.data = &lochnagar_regulators[LOCHNAGAR_MIC2VDD],
},
{
.compatible = "cirrus,lochnagar2-vddcore",
.data = &lochnagar_regulators[LOCHNAGAR_VDDCORE],
},
{},
{}
};
MODULE_DEVICE_TABLE(of, lochnagar_of_match);
static int lochnagar_regulator_probe(struct platform_device *pdev)
{

4
drivers/regulator/lp3971.c
View File

@ -159,7 +159,7 @@ static int lp3971_ldo_set_voltage_sel(struct regulator_dev *dev,
selector << LDO_VOL_CONTR_SHIFT(ldo));
}
static struct regulator_ops lp3971_ldo_ops = {
static const struct regulator_ops lp3971_ldo_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.is_enabled = lp3971_ldo_is_enabled,
@ -233,7 +233,7 @@ static int lp3971_dcdc_set_voltage_sel(struct regulator_dev *dev,
0 << BUCK_VOL_CHANGE_SHIFT(buck));
}
static struct regulator_ops lp3971_dcdc_ops = {
static const struct regulator_ops lp3971_dcdc_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.is_enabled = lp3971_dcdc_is_enabled,

4
drivers/regulator/lp3972.c
View File

@ -305,7 +305,7 @@ static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev,
return ret;
}
static struct regulator_ops lp3972_ldo_ops = {
static const struct regulator_ops lp3972_ldo_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.is_enabled = lp3972_ldo_is_enabled,
@ -386,7 +386,7 @@ static int lp3972_dcdc_set_voltage_sel(struct regulator_dev *dev,
LP3972_VOL_CHANGE_FLAG_MASK, 0);
}
static struct regulator_ops lp3972_dcdc_ops = {
static const struct regulator_ops lp3972_dcdc_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.is_enabled = lp3972_dcdc_is_enabled,

82
drivers/regulator/lp872x.c
View File

@ -353,64 +353,6 @@ static int lp872x_buck_get_voltage_sel(struct regulator_dev *rdev)
return val & LP872X_VOUT_M;
}
static int lp8725_buck_set_current_limit(struct regulator_dev *rdev,
int min_uA, int max_uA)
{
struct lp872x *lp = rdev_get_drvdata(rdev);
enum lp872x_regulator_id buck = rdev_get_id(rdev);
int i;
u8 addr;
switch (buck) {
case LP8725_ID_BUCK1:
addr = LP8725_BUCK1_VOUT2;
break;
case LP8725_ID_BUCK2:
addr = LP8725_BUCK2_VOUT2;
break;
default:
return -EINVAL;
}
for (i = ARRAY_SIZE(lp8725_buck_uA) - 1; i >= 0; i--) {
if (lp8725_buck_uA[i] >= min_uA &&
lp8725_buck_uA[i] <= max_uA)
return lp872x_update_bits(lp, addr,
LP8725_BUCK_CL_M,
i << LP8725_BUCK_CL_S);
}
return -EINVAL;
}
static int lp8725_buck_get_current_limit(struct regulator_dev *rdev)
{
struct lp872x *lp = rdev_get_drvdata(rdev);
enum lp872x_regulator_id buck = rdev_get_id(rdev);
u8 addr, val;
int ret;
switch (buck) {
case LP8725_ID_BUCK1:
addr = LP8725_BUCK1_VOUT2;
break;
case LP8725_ID_BUCK2:
addr = LP8725_BUCK2_VOUT2;
break;
default:
return -EINVAL;
}
ret = lp872x_read_byte(lp, addr, &val);
if (ret)
return ret;
val = (val & LP8725_BUCK_CL_M) >> LP8725_BUCK_CL_S;
return (val < ARRAY_SIZE(lp8725_buck_uA)) ?
lp8725_buck_uA[val] : -EINVAL;
}
static int lp872x_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct lp872x *lp = rdev_get_drvdata(rdev);
@ -478,7 +420,7 @@ static unsigned int lp872x_buck_get_mode(struct regulator_dev *rdev)
return val & mask ? REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
}
static struct regulator_ops lp872x_ldo_ops = {
static const struct regulator_ops lp872x_ldo_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
@ -489,7 +431,7 @@ static struct regulator_ops lp872x_ldo_ops = {
.enable_time = lp872x_regulator_enable_time,
};
static struct regulator_ops lp8720_buck_ops = {
static const struct regulator_ops lp8720_buck_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.set_voltage_sel = lp872x_buck_set_voltage_sel,
@ -502,7 +444,7 @@ static struct regulator_ops lp8720_buck_ops = {
.get_mode = lp872x_buck_get_mode,
};
static struct regulator_ops lp8725_buck_ops = {
static const struct regulator_ops lp8725_buck_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.set_voltage_sel = lp872x_buck_set_voltage_sel,
@ -513,11 +455,11 @@ static struct regulator_ops lp8725_buck_ops = {
.enable_time = lp872x_regulator_enable_time,
.set_mode = lp872x_buck_set_mode,
.get_mode = lp872x_buck_get_mode,
.set_current_limit = lp8725_buck_set_current_limit,
.get_current_limit = lp8725_buck_get_current_limit,
.set_current_limit = regulator_set_current_limit_regmap,
.get_current_limit = regulator_get_current_limit_regmap,
};
static struct regulator_desc lp8720_regulator_desc[] = {
static const struct regulator_desc lp8720_regulator_desc[] = {
{
.name = "ldo1",
.of_match = of_match_ptr("ldo1"),
@ -602,7 +544,7 @@ static struct regulator_desc lp8720_regulator_desc[] = {
},
};
static struct regulator_desc lp8725_regulator_desc[] = {
static const struct regulator_desc lp8725_regulator_desc[] = {
{
.name = "ldo1",
.of_match = of_match_ptr("ldo1"),
@ -712,6 +654,10 @@ static struct regulator_desc lp8725_regulator_desc[] = {
.owner = THIS_MODULE,
.enable_reg = LP872X_GENERAL_CFG,
.enable_mask = LP8725_BUCK1_EN_M,
.curr_table = lp8725_buck_uA,
.n_current_limits = ARRAY_SIZE(lp8725_buck_uA),
.csel_reg = LP8725_BUCK1_VOUT2,
.csel_mask = LP8725_BUCK_CL_M,
},
{
.name = "buck2",
@ -724,6 +670,10 @@ static struct regulator_desc lp8725_regulator_desc[] = {
.owner = THIS_MODULE,
.enable_reg = LP872X_GENERAL_CFG,
.enable_mask = LP8725_BUCK2_EN_M,
.curr_table = lp8725_buck_uA,
.n_current_limits = ARRAY_SIZE(lp8725_buck_uA),
.csel_reg = LP8725_BUCK2_VOUT2,
.csel_mask = LP8725_BUCK_CL_M,
},
};
@ -820,7 +770,7 @@ static struct regulator_init_data
static int lp872x_regulator_register(struct lp872x *lp)
{
struct regulator_desc *desc;
const struct regulator_desc *desc;
struct regulator_config cfg = { };
struct regulator_dev *rdev;
int i;

51
drivers/regulator/lp873x-regulator.c
View File

@ -39,6 +39,10 @@
.ramp_delay = _delay, \
.linear_ranges = _lr, \
.n_linear_ranges = ARRAY_SIZE(_lr), \
.curr_table = lp873x_buck_uA, \
.n_current_limits = ARRAY_SIZE(lp873x_buck_uA), \
.csel_reg = (_cr), \
.csel_mask = LP873X_BUCK0_CTRL_2_BUCK0_ILIM,\
}, \
.ctrl2_reg = _cr, \
}
@ -61,7 +65,7 @@ static const struct regulator_linear_range ldo0_ldo1_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0x0, 0x19, 100000),
};
static unsigned int lp873x_buck_ramp_delay[] = {
static const unsigned int lp873x_buck_ramp_delay[] = {
30000, 15000, 10000, 7500, 3800, 1900, 940, 470
};
@ -108,45 +112,8 @@ static int lp873x_buck_set_ramp_delay(struct regulator_dev *rdev,
return 0;
}
static int lp873x_buck_set_current_limit(struct regulator_dev *rdev,
int min_uA, int max_uA)
{
int id = rdev_get_id(rdev);
struct lp873x *lp873 = rdev_get_drvdata(rdev);
int i;
for (i = ARRAY_SIZE(lp873x_buck_uA) - 1; i >= 0; i--) {
if (lp873x_buck_uA[i] >= min_uA &&
lp873x_buck_uA[i] <= max_uA)
return regmap_update_bits(lp873->regmap,
regulators[id].ctrl2_reg,
LP873X_BUCK0_CTRL_2_BUCK0_ILIM,
i << __ffs(LP873X_BUCK0_CTRL_2_BUCK0_ILIM));
}
return -EINVAL;
}
static int lp873x_buck_get_current_limit(struct regulator_dev *rdev)
{
int id = rdev_get_id(rdev);
struct lp873x *lp873 = rdev_get_drvdata(rdev);
int ret;
unsigned int val;
ret = regmap_read(lp873->regmap, regulators[id].ctrl2_reg, &val);
if (ret)
return ret;
val = (val & LP873X_BUCK0_CTRL_2_BUCK0_ILIM) >>
__ffs(LP873X_BUCK0_CTRL_2_BUCK0_ILIM);
return (val < ARRAY_SIZE(lp873x_buck_uA)) ?
lp873x_buck_uA[val] : -EINVAL;
}
/* Operations permitted on BUCK0, BUCK1 */
static struct regulator_ops lp873x_buck01_ops = {
static const struct regulator_ops lp873x_buck01_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@ -156,12 +123,12 @@ static struct regulator_ops lp873x_buck01_ops = {
.map_voltage = regulator_map_voltage_linear_range,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = lp873x_buck_set_ramp_delay,
.set_current_limit = lp873x_buck_set_current_limit,
.get_current_limit = lp873x_buck_get_current_limit,
.set_current_limit = regulator_set_current_limit_regmap,
.get_current_limit = regulator_get_current_limit_regmap,
};
/* Operations permitted on LDO0 and LDO1 */
static struct regulator_ops lp873x_ldo01_ops = {
static const struct regulator_ops lp873x_ldo01_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,

6
drivers/regulator/lp8755.c
View File

@ -315,7 +315,7 @@ static int lp8755_init_data(struct lp8755_chip *pchip)
.vsel_mask = LP8755_BUCK_VOUT_M,\
}
static struct regulator_desc lp8755_regulators[] = {
static const struct regulator_desc lp8755_regulators[] = {
lp8755_buck_desc(0),
lp8755_buck_desc(1),
lp8755_buck_desc(2),
@ -386,7 +386,7 @@ static irqreturn_t lp8755_irq_handler(int irq, void *data)
if (ret < 0)
goto err_i2c;
/* send OCP event to all regualtor devices */
/* send OCP event to all regulator devices */
if ((flag1 & 0x01) && (pchip->irqmask & 0x01))
for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
if (pchip->rdev[icnt] != NULL)
@ -394,7 +394,7 @@ static irqreturn_t lp8755_irq_handler(int irq, void *data)
LP8755_EVENT_OCP,
NULL);
/* send OVP event to all regualtor devices */
/* send OVP event to all regulator devices */
if ((flag1 & 0x02) && (pchip->irqmask & 0x02))
for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
if (pchip->rdev[icnt] != NULL)

4
drivers/regulator/lp87565-regulator.c
View File

@ -51,7 +51,7 @@ static const struct regulator_linear_range buck0_1_2_3_ranges[] = {
REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000),
};
static unsigned int lp87565_buck_ramp_delay[] = {
static const unsigned int lp87565_buck_ramp_delay[] = {
30000, 15000, 10000, 7500, 3800, 1900, 940, 470
};
@ -140,7 +140,7 @@ static int lp87565_buck_get_current_limit(struct regulator_dev *rdev)
}
/* Operations permitted on BUCK0, BUCK1 */
static struct regulator_ops lp87565_buck_ops = {
static const struct regulator_ops lp87565_buck_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,

40
drivers/regulator/lp8788-buck.c
View File

@ -95,12 +95,10 @@ struct lp8788_buck {
void *dvs;
};
/* BUCK 1 ~ 4 voltage table */
static const int lp8788_buck_vtbl[] = {
500000, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000,
1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000,
1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000, 1900000,
1950000, 2000000,
/* BUCK 1 ~ 4 voltage ranges */
static const struct regulator_linear_range buck_volt_ranges[] = {
REGULATOR_LINEAR_RANGE(500000, 0, 0, 0),
REGULATOR_LINEAR_RANGE(800000, 1, 25, 50000),
};
static void lp8788_buck1_set_dvs(struct lp8788_buck *buck)
@ -345,8 +343,8 @@ static unsigned int lp8788_buck_get_mode(struct regulator_dev *rdev)
}
static const struct regulator_ops lp8788_buck12_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.set_voltage_sel = lp8788_buck12_set_voltage_sel,
.get_voltage_sel = lp8788_buck12_get_voltage_sel,
.enable = regulator_enable_regmap,
@ -358,8 +356,8 @@ static const struct regulator_ops lp8788_buck12_ops = {
};
static const struct regulator_ops lp8788_buck34_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.enable = regulator_enable_regmap,
@ -370,13 +368,14 @@ static const struct regulator_ops lp8788_buck34_ops = {
.get_mode = lp8788_buck_get_mode,
};
static struct regulator_desc lp8788_buck_desc[] = {
static const struct regulator_desc lp8788_buck_desc[] = {
{
.name = "buck1",
.id = BUCK1,
.ops = &lp8788_buck12_ops,
.n_voltages = ARRAY_SIZE(lp8788_buck_vtbl),
.volt_table = lp8788_buck_vtbl,
.n_voltages = 26,
.linear_ranges = buck_volt_ranges,
.n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_reg = LP8788_EN_BUCK,
@ -386,8 +385,9 @@ static struct regulator_desc lp8788_buck_desc[] = {
.name = "buck2",
.id = BUCK2,
.ops = &lp8788_buck12_ops,
.n_voltages = ARRAY_SIZE(lp8788_buck_vtbl),
.volt_table = lp8788_buck_vtbl,
.n_voltages = 26,
.linear_ranges = buck_volt_ranges,
.n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_reg = LP8788_EN_BUCK,
@ -397,8 +397,9 @@ static struct regulator_desc lp8788_buck_desc[] = {
.name = "buck3",
.id = BUCK3,
.ops = &lp8788_buck34_ops,
.n_voltages = ARRAY_SIZE(lp8788_buck_vtbl),
.volt_table = lp8788_buck_vtbl,
.n_voltages = 26,
.linear_ranges = buck_volt_ranges,
.n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_BUCK3_VOUT,
@ -410,8 +411,9 @@ static struct regulator_desc lp8788_buck_desc[] = {
.name = "buck4",
.id = BUCK4,
.ops = &lp8788_buck34_ops,
.n_voltages = ARRAY_SIZE(lp8788_buck_vtbl),
.volt_table = lp8788_buck_vtbl,
.n_voltages = 26,
.linear_ranges = buck_volt_ranges,
.n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_BUCK4_VOUT,

4
drivers/regulator/lp8788-ldo.c
View File

@ -186,7 +186,7 @@ static const struct regulator_ops lp8788_ldo_voltage_fixed_ops = {
.enable_time = lp8788_ldo_enable_time,
};
static struct regulator_desc lp8788_dldo_desc[] = {
static const struct regulator_desc lp8788_dldo_desc[] = {
{
.name = "dldo1",
.id = DLDO1,
@ -343,7 +343,7 @@ static struct regulator_desc lp8788_dldo_desc[] = {
},
};
static struct regulator_desc lp8788_aldo_desc[] = {
static const struct regulator_desc lp8788_aldo_desc[] = {
{
.name = "aldo1",
.id = ALDO1,

65
drivers/regulator/ltc3676.c
View File

@ -241,61 +241,10 @@ static struct regulator_desc ltc3676_regulators[LTC3676_NUM_REGULATORS] = {
LTC3676_FIXED_REG(LDO4, ldo4, LDOB, 2),
};
static bool ltc3676_writeable_reg(struct device *dev, unsigned int reg)
static bool ltc3676_readable_writeable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case LTC3676_IRQSTAT:
case LTC3676_BUCK1:
case LTC3676_BUCK2:
case LTC3676_BUCK3:
case LTC3676_BUCK4:
case LTC3676_LDOA:
case LTC3676_LDOB:
case LTC3676_SQD1:
case LTC3676_SQD2:
case LTC3676_CNTRL:
case LTC3676_DVB1A:
case LTC3676_DVB1B:
case LTC3676_DVB2A:
case LTC3676_DVB2B:
case LTC3676_DVB3A:
case LTC3676_DVB3B:
case LTC3676_DVB4A:
case LTC3676_DVB4B:
case LTC3676_MSKIRQ:
case LTC3676_MSKPG:
case LTC3676_USER:
case LTC3676_HRST:
case LTC3676_CLIRQ:
return true;
}
return false;
}
static bool ltc3676_readable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case LTC3676_IRQSTAT:
case LTC3676_BUCK1:
case LTC3676_BUCK2:
case LTC3676_BUCK3:
case LTC3676_BUCK4:
case LTC3676_LDOA:
case LTC3676_LDOB:
case LTC3676_SQD1:
case LTC3676_SQD2:
case LTC3676_CNTRL:
case LTC3676_DVB1A:
case LTC3676_DVB1B:
case LTC3676_DVB2A:
case LTC3676_DVB2B:
case LTC3676_DVB3A:
case LTC3676_DVB3B:
case LTC3676_DVB4A:
case LTC3676_DVB4B:
case LTC3676_MSKIRQ:
case LTC3676_MSKPG:
case LTC3676_USER:
case LTC3676_BUCK1 ... LTC3676_IRQSTAT:
case LTC3676_HRST:
case LTC3676_CLIRQ:
return true;
@ -306,9 +255,7 @@ static bool ltc3676_readable_reg(struct device *dev, unsigned int reg)
static bool ltc3676_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case LTC3676_IRQSTAT:
case LTC3676_PGSTATL:
case LTC3676_PGSTATRT:
case LTC3676_IRQSTAT ... LTC3676_PGSTATRT:
return true;
}
return false;
@ -317,8 +264,8 @@ static bool ltc3676_volatile_reg(struct device *dev, unsigned int reg)
static const struct regmap_config ltc3676_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.writeable_reg = ltc3676_writeable_reg,
.readable_reg = ltc3676_readable_reg,
.writeable_reg = ltc3676_readable_writeable_reg,
.readable_reg = ltc3676_readable_writeable_reg,
.volatile_reg = ltc3676_volatile_reg,
.max_register = LTC3676_CLIRQ,
.use_single_read = true,
@ -442,5 +389,5 @@ static struct i2c_driver ltc3676_driver = {
module_i2c_driver(ltc3676_driver);
MODULE_AUTHOR("Tim Harvey <tharvey@gateworks.com>");
MODULE_DESCRIPTION("Regulator driver for Linear Technology LTC1376");
MODULE_DESCRIPTION("Regulator driver for Linear Technology LTC3676");
MODULE_LICENSE("GPL v2");

1
drivers/regulator/max14577-regulator.c
View File

@ -324,4 +324,3 @@ module_exit(max14577_regulator_exit);
MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
MODULE_DESCRIPTION("Maxim 14577/77836 regulator driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:max14577-regulator");

12
drivers/regulator/max77620-regulator.c
View File

@ -1,7 +1,7 @@
/*
* Maxim MAX77620 Regulator driver
*
* Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
* Copyright (c) 2016-2018, NVIDIA CORPORATION. All rights reserved.
*
* Author: Mallikarjun Kasoju <mkasoju@nvidia.com>
* Laxman Dewangan <ldewangan@nvidia.com>
@ -690,6 +690,7 @@ static const struct regulator_ops max77620_regulator_ops = {
.active_discharge_mask = MAX77620_SD_CFG1_ADE_MASK, \
.active_discharge_reg = MAX77620_REG_##_id##_CFG, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
}, \
}
@ -721,6 +722,7 @@ static const struct regulator_ops max77620_regulator_ops = {
.active_discharge_mask = MAX77620_LDO_CFG2_ADE_MASK, \
.active_discharge_reg = MAX77620_REG_##_id##_CFG2, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
}, \
}
@ -803,6 +805,14 @@ static int max77620_regulator_probe(struct platform_device *pdev)
rdesc = &rinfo[id].desc;
pmic->rinfo[id] = &max77620_regs_info[id];
pmic->enable_power_mode[id] = MAX77620_POWER_MODE_NORMAL;
pmic->reg_pdata[id].active_fps_src = -1;
pmic->reg_pdata[id].active_fps_pd_slot = -1;
pmic->reg_pdata[id].active_fps_pu_slot = -1;
pmic->reg_pdata[id].suspend_fps_src = -1;
pmic->reg_pdata[id].suspend_fps_pd_slot = -1;
pmic->reg_pdata[id].suspend_fps_pu_slot = -1;
pmic->reg_pdata[id].power_ok = -1;
pmic->reg_pdata[id].ramp_rate_setting = -1;
ret = max77620_read_slew_rate(pmic, id);
if (ret < 0)

498
drivers/regulator/max77650-regulator.c Normal file
View File

@ -0,0 +1,498 @@
// SPDX-License-Identifier: GPL-2.0
//
// Copyright (C) 2018 BayLibre SAS
// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
//
// Regulator driver for MAXIM 77650/77651 charger/power-supply.
#include <linux/of.h>
#include <linux/mfd/max77650.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#define MAX77650_REGULATOR_EN_CTRL_MASK GENMASK(3, 0)
#define MAX77650_REGULATOR_EN_CTRL_BITS(_reg) \
((_reg) & MAX77650_REGULATOR_EN_CTRL_MASK)
#define MAX77650_REGULATOR_ENABLED GENMASK(2, 1)
#define MAX77650_REGULATOR_DISABLED BIT(2)
#define MAX77650_REGULATOR_V_LDO_MASK GENMASK(6, 0)
#define MAX77650_REGULATOR_V_SBB_MASK GENMASK(5, 0)
#define MAX77650_REGULATOR_AD_MASK BIT(3)
#define MAX77650_REGULATOR_AD_DISABLED 0x00
#define MAX77650_REGULATOR_AD_ENABLED BIT(3)
#define MAX77650_REGULATOR_CURR_LIM_MASK GENMASK(7, 6)
enum {
MAX77650_REGULATOR_ID_LDO = 0,
MAX77650_REGULATOR_ID_SBB0,
MAX77650_REGULATOR_ID_SBB1,
MAX77650_REGULATOR_ID_SBB2,
MAX77650_REGULATOR_NUM_REGULATORS,
};
struct max77650_regulator_desc {
struct regulator_desc desc;
unsigned int regA;
unsigned int regB;
};
static const u32 max77651_sbb1_regulator_volt_table[] = {
2400000, 3200000, 4000000, 4800000,
2450000, 3250000, 4050000, 4850000,
2500000, 3300000, 4100000, 4900000,
2550000, 3350000, 4150000, 4950000,
2600000, 3400000, 4200000, 5000000,
2650000, 3450000, 4250000, 5050000,
2700000, 3500000, 4300000, 5100000,
2750000, 3550000, 4350000, 5150000,
2800000, 3600000, 4400000, 5200000,
2850000, 3650000, 4450000, 5250000,
2900000, 3700000, 4500000, 0,
2950000, 3750000, 4550000, 0,
3000000, 3800000, 4600000, 0,
3050000, 3850000, 4650000, 0,
3100000, 3900000, 4700000, 0,
3150000, 3950000, 4750000, 0,
};
#define MAX77651_REGULATOR_SBB1_SEL_DEC(_val) \
(((_val & 0x3c) >> 2) | ((_val & 0x03) << 4))
#define MAX77651_REGULATOR_SBB1_SEL_ENC(_val) \
(((_val & 0x30) >> 4) | ((_val & 0x0f) << 2))
#define MAX77650_REGULATOR_SBB1_SEL_DECR(_val) \
do { \
_val = MAX77651_REGULATOR_SBB1_SEL_DEC(_val); \
_val--; \
_val = MAX77651_REGULATOR_SBB1_SEL_ENC(_val); \
} while (0)
#define MAX77650_REGULATOR_SBB1_SEL_INCR(_val) \
do { \
_val = MAX77651_REGULATOR_SBB1_SEL_DEC(_val); \
_val++; \
_val = MAX77651_REGULATOR_SBB1_SEL_ENC(_val); \
} while (0)
static const unsigned int max77650_current_limit_table[] = {
1000000, 866000, 707000, 500000,
};
static int max77650_regulator_is_enabled(struct regulator_dev *rdev)
{
struct max77650_regulator_desc *rdesc;
struct regmap *map;
int val, rv, en;
rdesc = rdev_get_drvdata(rdev);
map = rdev_get_regmap(rdev);
rv = regmap_read(map, rdesc->regB, &val);
if (rv)
return rv;
en = MAX77650_REGULATOR_EN_CTRL_BITS(val);
return en != MAX77650_REGULATOR_DISABLED;
}
static int max77650_regulator_enable(struct regulator_dev *rdev)
{
struct max77650_regulator_desc *rdesc;
struct regmap *map;
rdesc = rdev_get_drvdata(rdev);
map = rdev_get_regmap(rdev);
return regmap_update_bits(map, rdesc->regB,
MAX77650_REGULATOR_EN_CTRL_MASK,
MAX77650_REGULATOR_ENABLED);
}
static int max77650_regulator_disable(struct regulator_dev *rdev)
{
struct max77650_regulator_desc *rdesc;
struct regmap *map;
rdesc = rdev_get_drvdata(rdev);
map = rdev_get_regmap(rdev);
return regmap_update_bits(map, rdesc->regB,
MAX77650_REGULATOR_EN_CTRL_MASK,
MAX77650_REGULATOR_DISABLED);
}
static int max77650_regulator_set_voltage_sel(struct regulator_dev *rdev,
unsigned int sel)
{
int rv = 0, curr, diff;
bool ascending;
/*
* If the regulator is disabled, we can program the desired
* voltage right away.
*/
if (!max77650_regulator_is_enabled(rdev))
return regulator_set_voltage_sel_regmap(rdev, sel);
/*
* Otherwise we need to manually ramp the output voltage up/down
* one step at a time.
*/
curr = regulator_get_voltage_sel_regmap(rdev);
if (curr < 0)
return curr;
diff = curr - sel;
if (diff == 0)
return 0; /* Already there. */
else if (diff > 0)
ascending = false;
else
ascending = true;
/*
* Make sure we'll get to the right voltage and break the loop even if
* the selector equals 0.
*/
for (ascending ? curr++ : curr--;; ascending ? curr++ : curr--) {
rv = regulator_set_voltage_sel_regmap(rdev, curr);
if (rv)
return rv;
if (curr == sel)
break;
}
return 0;
}
/*
* Special case: non-linear voltage table for max77651 SBB1 - software
* must ensure the voltage is ramped in 50mV increments.
*/
static int max77651_regulator_sbb1_set_voltage_sel(struct regulator_dev *rdev,
unsigned int sel)
{
int rv = 0, curr, vcurr, vdest, vdiff;
/*
* If the regulator is disabled, we can program the desired
* voltage right away.
*/
if (!max77650_regulator_is_enabled(rdev))
return regulator_set_voltage_sel_regmap(rdev, sel);
curr = regulator_get_voltage_sel_regmap(rdev);
if (curr < 0)
return curr;
if (curr == sel)
return 0; /* Already there. */
vcurr = max77651_sbb1_regulator_volt_table[curr];
vdest = max77651_sbb1_regulator_volt_table[sel];
vdiff = vcurr - vdest;
for (;;) {
if (vdiff > 0)
MAX77650_REGULATOR_SBB1_SEL_DECR(curr);
else
MAX77650_REGULATOR_SBB1_SEL_INCR(curr);
rv = regulator_set_voltage_sel_regmap(rdev, curr);
if (rv)
return rv;
if (curr == sel)
break;
};
return 0;
}
static const struct regulator_ops max77650_regulator_LDO_ops = {
.is_enabled = max77650_regulator_is_enabled,
.enable = max77650_regulator_enable,
.disable = max77650_regulator_disable,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = max77650_regulator_set_voltage_sel,
.set_active_discharge = regulator_set_active_discharge_regmap,
};
static const struct regulator_ops max77650_regulator_SBB_ops = {
.is_enabled = max77650_regulator_is_enabled,
.enable = max77650_regulator_enable,
.disable = max77650_regulator_disable,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = max77650_regulator_set_voltage_sel,
.get_current_limit = regulator_get_current_limit_regmap,
.set_current_limit = regulator_set_current_limit_regmap,
.set_active_discharge = regulator_set_active_discharge_regmap,
};
/* Special case for max77651 SBB1 - non-linear voltage mapping. */
static const struct regulator_ops max77651_SBB1_regulator_ops = {
.is_enabled = max77650_regulator_is_enabled,
.enable = max77650_regulator_enable,
.disable = max77650_regulator_disable,
.list_voltage = regulator_list_voltage_table,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = max77651_regulator_sbb1_set_voltage_sel,
.get_current_limit = regulator_get_current_limit_regmap,
.set_current_limit = regulator_set_current_limit_regmap,
.set_active_discharge = regulator_set_active_discharge_regmap,
};
static struct max77650_regulator_desc max77650_LDO_desc = {
.desc = {
.name = "ldo",
.of_match = of_match_ptr("ldo"),
.regulators_node = of_match_ptr("regulators"),
.supply_name = "in-ldo",
.id = MAX77650_REGULATOR_ID_LDO,
.ops = &max77650_regulator_LDO_ops,
.min_uV = 1350000,
.uV_step = 12500,
.n_voltages = 128,
.vsel_mask = MAX77650_REGULATOR_V_LDO_MASK,
.vsel_reg = MAX77650_REG_CNFG_LDO_A,
.active_discharge_off = MAX77650_REGULATOR_AD_DISABLED,
.active_discharge_on = MAX77650_REGULATOR_AD_ENABLED,
.active_discharge_mask = MAX77650_REGULATOR_AD_MASK,
.active_discharge_reg = MAX77650_REG_CNFG_LDO_B,
.enable_time = 100,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
.regA = MAX77650_REG_CNFG_LDO_A,
.regB = MAX77650_REG_CNFG_LDO_B,
};
static struct max77650_regulator_desc max77650_SBB0_desc = {
.desc = {
.name = "sbb0",
.of_match = of_match_ptr("sbb0"),
.regulators_node = of_match_ptr("regulators"),
.supply_name = "in-sbb0",
.id = MAX77650_REGULATOR_ID_SBB0,
.ops = &max77650_regulator_SBB_ops,
.min_uV = 800000,
.uV_step = 25000,
.n_voltages = 64,
.vsel_mask = MAX77650_REGULATOR_V_SBB_MASK,
.vsel_reg = MAX77650_REG_CNFG_SBB0_A,
.active_discharge_off = MAX77650_REGULATOR_AD_DISABLED,
.active_discharge_on = MAX77650_REGULATOR_AD_ENABLED,
.active_discharge_mask = MAX77650_REGULATOR_AD_MASK,
.active_discharge_reg = MAX77650_REG_CNFG_SBB0_B,
.enable_time = 100,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.csel_reg = MAX77650_REG_CNFG_SBB0_A,
.csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
.curr_table = max77650_current_limit_table,
.n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
},
.regA = MAX77650_REG_CNFG_SBB0_A,
.regB = MAX77650_REG_CNFG_SBB0_B,
};
static struct max77650_regulator_desc max77650_SBB1_desc = {
.desc = {
.name = "sbb1",
.of_match = of_match_ptr("sbb1"),
.regulators_node = of_match_ptr("regulators"),
.supply_name = "in-sbb1",
.id = MAX77650_REGULATOR_ID_SBB1,
.ops = &max77650_regulator_SBB_ops,
.min_uV = 800000,
.uV_step = 12500,
.n_voltages = 64,
.vsel_mask = MAX77650_REGULATOR_V_SBB_MASK,
.vsel_reg = MAX77650_REG_CNFG_SBB1_A,
.active_discharge_off = MAX77650_REGULATOR_AD_DISABLED,
.active_discharge_on = MAX77650_REGULATOR_AD_ENABLED,
.active_discharge_mask = MAX77650_REGULATOR_AD_MASK,
.active_discharge_reg = MAX77650_REG_CNFG_SBB1_B,
.enable_time = 100,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.csel_reg = MAX77650_REG_CNFG_SBB1_A,
.csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
.curr_table = max77650_current_limit_table,
.n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
},
.regA = MAX77650_REG_CNFG_SBB1_A,
.regB = MAX77650_REG_CNFG_SBB1_B,
};
static struct max77650_regulator_desc max77651_SBB1_desc = {
.desc = {
.name = "sbb1",
.of_match = of_match_ptr("sbb1"),
.regulators_node = of_match_ptr("regulators"),
.supply_name = "in-sbb1",
.id = MAX77650_REGULATOR_ID_SBB1,
.ops = &max77651_SBB1_regulator_ops,
.volt_table = max77651_sbb1_regulator_volt_table,
.n_voltages = ARRAY_SIZE(max77651_sbb1_regulator_volt_table),
.vsel_mask = MAX77650_REGULATOR_V_SBB_MASK,
.vsel_reg = MAX77650_REG_CNFG_SBB1_A,
.active_discharge_off = MAX77650_REGULATOR_AD_DISABLED,
.active_discharge_on = MAX77650_REGULATOR_AD_ENABLED,
.active_discharge_mask = MAX77650_REGULATOR_AD_MASK,
.active_discharge_reg = MAX77650_REG_CNFG_SBB1_B,
.enable_time = 100,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.csel_reg = MAX77650_REG_CNFG_SBB1_A,
.csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
.curr_table = max77650_current_limit_table,
.n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
},
.regA = MAX77650_REG_CNFG_SBB1_A,
.regB = MAX77650_REG_CNFG_SBB1_B,
};
static struct max77650_regulator_desc max77650_SBB2_desc = {
.desc = {
.name = "sbb2",
.of_match = of_match_ptr("sbb2"),
.regulators_node = of_match_ptr("regulators"),
.supply_name = "in-sbb0",
.id = MAX77650_REGULATOR_ID_SBB2,
.ops = &max77650_regulator_SBB_ops,
.min_uV = 800000,
.uV_step = 50000,
.n_voltages = 64,
.vsel_mask = MAX77650_REGULATOR_V_SBB_MASK,
.vsel_reg = MAX77650_REG_CNFG_SBB2_A,
.active_discharge_off = MAX77650_REGULATOR_AD_DISABLED,
.active_discharge_on = MAX77650_REGULATOR_AD_ENABLED,
.active_discharge_mask = MAX77650_REGULATOR_AD_MASK,
.active_discharge_reg = MAX77650_REG_CNFG_SBB2_B,
.enable_time = 100,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.csel_reg = MAX77650_REG_CNFG_SBB2_A,
.csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
.curr_table = max77650_current_limit_table,
.n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
},
.regA = MAX77650_REG_CNFG_SBB2_A,
.regB = MAX77650_REG_CNFG_SBB2_B,
};
static struct max77650_regulator_desc max77651_SBB2_desc = {
.desc = {
.name = "sbb2",
.of_match = of_match_ptr("sbb2"),
.regulators_node = of_match_ptr("regulators"),
.supply_name = "in-sbb0",
.id = MAX77650_REGULATOR_ID_SBB2,
.ops = &max77650_regulator_SBB_ops,
.min_uV = 2400000,
.uV_step = 50000,
.n_voltages = 64,
.vsel_mask = MAX77650_REGULATOR_V_SBB_MASK,
.vsel_reg = MAX77650_REG_CNFG_SBB2_A,
.active_discharge_off = MAX77650_REGULATOR_AD_DISABLED,
.active_discharge_on = MAX77650_REGULATOR_AD_ENABLED,
.active_discharge_mask = MAX77650_REGULATOR_AD_MASK,
.active_discharge_reg = MAX77650_REG_CNFG_SBB2_B,
.enable_time = 100,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.csel_reg = MAX77650_REG_CNFG_SBB2_A,
.csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
.curr_table = max77650_current_limit_table,
.n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
},
.regA = MAX77650_REG_CNFG_SBB2_A,
.regB = MAX77650_REG_CNFG_SBB2_B,
};
static int max77650_regulator_probe(struct platform_device *pdev)
{
struct max77650_regulator_desc **rdescs;
struct max77650_regulator_desc *rdesc;
struct regulator_config config = { };
struct device *dev, *parent;
struct regulator_dev *rdev;
struct regmap *map;
unsigned int val;
int i, rv;
dev = &pdev->dev;
parent = dev->parent;
if (!dev->of_node)
dev->of_node = parent->of_node;
rdescs = devm_kcalloc(dev, MAX77650_REGULATOR_NUM_REGULATORS,
sizeof(*rdescs), GFP_KERNEL);
if (!rdescs)
return -ENOMEM;
map = dev_get_regmap(parent, NULL);
if (!map)
return -ENODEV;
rv = regmap_read(map, MAX77650_REG_CID, &val);
if (rv)
return rv;
rdescs[MAX77650_REGULATOR_ID_LDO] = &max77650_LDO_desc;
rdescs[MAX77650_REGULATOR_ID_SBB0] = &max77650_SBB0_desc;
switch (MAX77650_CID_BITS(val)) {
case MAX77650_CID_77650A:
case MAX77650_CID_77650C:
rdescs[MAX77650_REGULATOR_ID_SBB1] = &max77650_SBB1_desc;
rdescs[MAX77650_REGULATOR_ID_SBB2] = &max77650_SBB2_desc;
break;
case MAX77650_CID_77651A:
case MAX77650_CID_77651B:
rdescs[MAX77650_REGULATOR_ID_SBB1] = &max77651_SBB1_desc;
rdescs[MAX77650_REGULATOR_ID_SBB2] = &max77651_SBB2_desc;
break;
default:
return -ENODEV;
}
config.dev = parent;
for (i = 0; i < MAX77650_REGULATOR_NUM_REGULATORS; i++) {
rdesc = rdescs[i];
config.driver_data = rdesc;
rdev = devm_regulator_register(dev, &rdesc->desc, &config);
if (IS_ERR(rdev))
return PTR_ERR(rdev);
}
return 0;
}
static struct platform_driver max77650_regulator_driver = {
.driver = {
.name = "max77650-regulator",
},
.probe = max77650_regulator_probe,
};
module_platform_driver(max77650_regulator_driver);
MODULE_DESCRIPTION("MAXIM 77650/77651 regulator driver");
MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
MODULE_LICENSE("GPL v2");

6
drivers/regulator/max77802-regulator.c
View File

@ -248,9 +248,9 @@ static int max77802_set_ramp_delay_2bit(struct regulator_dev *rdev,
unsigned int ramp_value;
if (id > MAX77802_BUCK4) {
dev_warn(&rdev->dev,
"%s: regulator: ramp delay not supported\n",
rdev->desc->name);
dev_warn(&rdev->dev,
"%s: regulator: ramp delay not supported\n",
rdev->desc->name);
return -EINVAL;
}
ramp_value = max77802_find_ramp_value(rdev, ramp_table_77802_2bit,

80
drivers/regulator/mc13783-regulator.c
View File

@ -226,69 +226,69 @@ static const unsigned int mc13783_pwgtdrv_val[] = {
5500000,
};
static struct regulator_ops mc13783_gpo_regulator_ops;
static const struct regulator_ops mc13783_gpo_regulator_ops;
#define MC13783_DEFINE(prefix, name, reg, vsel_reg, voltages) \
MC13xxx_DEFINE(MC13783_REG_, name, reg, vsel_reg, voltages, \
#define MC13783_DEFINE(prefix, name, node, reg, vsel_reg, voltages) \
MC13xxx_DEFINE(MC13783_REG_, name, node, reg, vsel_reg, voltages, \
mc13xxx_regulator_ops)
#define MC13783_FIXED_DEFINE(prefix, name, reg, voltages) \
MC13xxx_FIXED_DEFINE(MC13783_REG_, name, reg, voltages, \
#define MC13783_FIXED_DEFINE(prefix, name, node, reg, voltages) \
MC13xxx_FIXED_DEFINE(MC13783_REG_, name, node, reg, voltages, \
mc13xxx_fixed_regulator_ops)
#define MC13783_GPO_DEFINE(prefix, name, reg, voltages) \
MC13xxx_GPO_DEFINE(MC13783_REG_, name, reg, voltages, \
#define MC13783_GPO_DEFINE(prefix, name, node, reg, voltages) \
MC13xxx_GPO_DEFINE(MC13783_REG_, name, node, reg, voltages, \
mc13783_gpo_regulator_ops)
#define MC13783_DEFINE_SW(_name, _reg, _vsel_reg, _voltages) \
MC13783_DEFINE(REG, _name, _reg, _vsel_reg, _voltages)
#define MC13783_DEFINE_REGU(_name, _reg, _vsel_reg, _voltages) \
MC13783_DEFINE(REG, _name, _reg, _vsel_reg, _voltages)
#define MC13783_DEFINE_SW(_name, _node, _reg, _vsel_reg, _voltages) \
MC13783_DEFINE(REG, _name, _node, _reg, _vsel_reg, _voltages)
#define MC13783_DEFINE_REGU(_name, _node, _reg, _vsel_reg, _voltages) \
MC13783_DEFINE(REG, _name, _node, _reg, _vsel_reg, _voltages)
static struct mc13xxx_regulator mc13783_regulators[] = {
MC13783_DEFINE_SW(SW1A, SWITCHERS0, SWITCHERS0, mc13783_sw1x_val),
MC13783_DEFINE_SW(SW1B, SWITCHERS1, SWITCHERS1, mc13783_sw1x_val),
MC13783_DEFINE_SW(SW2A, SWITCHERS2, SWITCHERS2, mc13783_sw2x_val),
MC13783_DEFINE_SW(SW2B, SWITCHERS3, SWITCHERS3, mc13783_sw2x_val),
MC13783_DEFINE_SW(SW3, SWITCHERS5, SWITCHERS5, mc13783_sw3_val),
MC13783_DEFINE_SW(SW1A, sw1a, SWITCHERS0, SWITCHERS0, mc13783_sw1x_val),
MC13783_DEFINE_SW(SW1B, sw1b, SWITCHERS1, SWITCHERS1, mc13783_sw1x_val),
MC13783_DEFINE_SW(SW2A, sw2a, SWITCHERS2, SWITCHERS2, mc13783_sw2x_val),
MC13783_DEFINE_SW(SW2B, sw2b, SWITCHERS3, SWITCHERS3, mc13783_sw2x_val),
MC13783_DEFINE_SW(SW3, sw3, SWITCHERS5, SWITCHERS5, mc13783_sw3_val),
MC13783_FIXED_DEFINE(REG, VAUDIO, REGULATORMODE0, mc13783_vaudio_val),
MC13783_FIXED_DEFINE(REG, VIOHI, REGULATORMODE0, mc13783_viohi_val),
MC13783_DEFINE_REGU(VIOLO, REGULATORMODE0, REGULATORSETTING0,
MC13783_FIXED_DEFINE(REG, VAUDIO, vaudio, REGULATORMODE0, mc13783_vaudio_val),
MC13783_FIXED_DEFINE(REG, VIOHI, viohi, REGULATORMODE0, mc13783_viohi_val),
MC13783_DEFINE_REGU(VIOLO, violo, REGULATORMODE0, REGULATORSETTING0,
mc13783_violo_val),
MC13783_DEFINE_REGU(VDIG, REGULATORMODE0, REGULATORSETTING0,
MC13783_DEFINE_REGU(VDIG, vdig, REGULATORMODE0, REGULATORSETTING0,
mc13783_vdig_val),
MC13783_DEFINE_REGU(VGEN, REGULATORMODE0, REGULATORSETTING0,
MC13783_DEFINE_REGU(VGEN, vgen, REGULATORMODE0, REGULATORSETTING0,
mc13783_vgen_val),
MC13783_DEFINE_REGU(VRFDIG, REGULATORMODE0, REGULATORSETTING0,
MC13783_DEFINE_REGU(VRFDIG, vrfdig, REGULATORMODE0, REGULATORSETTING0,
mc13783_vrfdig_val),
MC13783_DEFINE_REGU(VRFREF, REGULATORMODE0, REGULATORSETTING0,
MC13783_DEFINE_REGU(VRFREF, vrfref, REGULATORMODE0, REGULATORSETTING0,
mc13783_vrfref_val),
MC13783_DEFINE_REGU(VRFCP, REGULATORMODE0, REGULATORSETTING0,
MC13783_DEFINE_REGU(VRFCP, vrfcp, REGULATORMODE0, REGULATORSETTING0,
mc13783_vrfcp_val),
MC13783_DEFINE_REGU(VSIM, REGULATORMODE1, REGULATORSETTING0,
MC13783_DEFINE_REGU(VSIM, vsim, REGULATORMODE1, REGULATORSETTING0,
mc13783_vsim_val),
MC13783_DEFINE_REGU(VESIM, REGULATORMODE1, REGULATORSETTING0,
MC13783_DEFINE_REGU(VESIM, vesim, REGULATORMODE1, REGULATORSETTING0,
mc13783_vesim_val),
MC13783_DEFINE_REGU(VCAM, REGULATORMODE1, REGULATORSETTING0,
MC13783_DEFINE_REGU(VCAM, vcam, REGULATORMODE1, REGULATORSETTING0,
mc13783_vcam_val),
MC13783_FIXED_DEFINE(REG, VRFBG, REGULATORMODE1, mc13783_vrfbg_val),
MC13783_DEFINE_REGU(VVIB, REGULATORMODE1, REGULATORSETTING1,
MC13783_FIXED_DEFINE(REG, VRFBG, vrfbg, REGULATORMODE1, mc13783_vrfbg_val),
MC13783_DEFINE_REGU(VVIB, vvib, REGULATORMODE1, REGULATORSETTING1,
mc13783_vvib_val),
MC13783_DEFINE_REGU(VRF1, REGULATORMODE1, REGULATORSETTING1,
MC13783_DEFINE_REGU(VRF1, vrf1, REGULATORMODE1, REGULATORSETTING1,
mc13783_vrf_val),
MC13783_DEFINE_REGU(VRF2, REGULATORMODE1, REGULATORSETTING1,
MC13783_DEFINE_REGU(VRF2, vrf2, REGULATORMODE1, REGULATORSETTING1,
mc13783_vrf_val),
MC13783_DEFINE_REGU(VMMC1, REGULATORMODE1, REGULATORSETTING1,
MC13783_DEFINE_REGU(VMMC1, vmmc1, REGULATORMODE1, REGULATORSETTING1,
mc13783_vmmc_val),
MC13783_DEFINE_REGU(VMMC2, REGULATORMODE1, REGULATORSETTING1,
MC13783_DEFINE_REGU(VMMC2, vmmc2, REGULATORMODE1, REGULATORSETTING1,
mc13783_vmmc_val),
MC13783_GPO_DEFINE(REG, GPO1, POWERMISC, mc13783_gpo_val),
MC13783_GPO_DEFINE(REG, GPO2, POWERMISC, mc13783_gpo_val),
MC13783_GPO_DEFINE(REG, GPO3, POWERMISC, mc13783_gpo_val),
MC13783_GPO_DEFINE(REG, GPO4, POWERMISC, mc13783_gpo_val),
MC13783_GPO_DEFINE(REG, PWGT1SPI, POWERMISC, mc13783_pwgtdrv_val),
MC13783_GPO_DEFINE(REG, PWGT2SPI, POWERMISC, mc13783_pwgtdrv_val),
MC13783_GPO_DEFINE(REG, GPO1, gpo1, POWERMISC, mc13783_gpo_val),
MC13783_GPO_DEFINE(REG, GPO2, gpo1, POWERMISC, mc13783_gpo_val),
MC13783_GPO_DEFINE(REG, GPO3, gpo1, POWERMISC, mc13783_gpo_val),
MC13783_GPO_DEFINE(REG, GPO4, gpo1, POWERMISC, mc13783_gpo_val),
MC13783_GPO_DEFINE(REG, PWGT1SPI, pwgt1spi, POWERMISC, mc13783_pwgtdrv_val),
MC13783_GPO_DEFINE(REG, PWGT2SPI, pwgt2spi, POWERMISC, mc13783_pwgtdrv_val),
};
static int mc13783_powermisc_rmw(struct mc13xxx_regulator_priv *priv, u32 mask,
@ -380,7 +380,7 @@ static int mc13783_gpo_regulator_is_enabled(struct regulator_dev *rdev)
return (val & mc13xxx_regulators[id].enable_bit) != 0;
}
static struct regulator_ops mc13783_gpo_regulator_ops = {
static const struct regulator_ops mc13783_gpo_regulator_ops = {
.enable = mc13783_gpo_regulator_enable,
.disable = mc13783_gpo_regulator_disable,
.is_enabled = mc13783_gpo_regulator_is_enabled,

72
drivers/regulator/mc13892-regulator.c
View File

@ -242,61 +242,61 @@ static const unsigned int mc13892_pwgtdrv[] = {
5000000,
};
static struct regulator_ops mc13892_gpo_regulator_ops;
static struct regulator_ops mc13892_sw_regulator_ops;
static const struct regulator_ops mc13892_gpo_regulator_ops;
static const struct regulator_ops mc13892_sw_regulator_ops;
#define MC13892_FIXED_DEFINE(name, reg, voltages) \
MC13xxx_FIXED_DEFINE(MC13892_, name, reg, voltages, \
#define MC13892_FIXED_DEFINE(name, node, reg, voltages) \
MC13xxx_FIXED_DEFINE(MC13892_, name, node, reg, voltages, \
mc13xxx_fixed_regulator_ops)
#define MC13892_GPO_DEFINE(name, reg, voltages) \
MC13xxx_GPO_DEFINE(MC13892_, name, reg, voltages, \
#define MC13892_GPO_DEFINE(name, node, reg, voltages) \
MC13xxx_GPO_DEFINE(MC13892_, name, node, reg, voltages, \
mc13892_gpo_regulator_ops)
#define MC13892_SW_DEFINE(name, reg, vsel_reg, voltages) \
MC13xxx_DEFINE(MC13892_, name, reg, vsel_reg, voltages, \
#define MC13892_SW_DEFINE(name, node, reg, vsel_reg, voltages) \
MC13xxx_DEFINE(MC13892_, name, node, reg, vsel_reg, voltages, \
mc13892_sw_regulator_ops)
#define MC13892_DEFINE_REGU(name, reg, vsel_reg, voltages) \
MC13xxx_DEFINE(MC13892_, name, reg, vsel_reg, voltages, \
#define MC13892_DEFINE_REGU(name, node, reg, vsel_reg, voltages) \
MC13xxx_DEFINE(MC13892_, name, node, reg, vsel_reg, voltages, \
mc13xxx_regulator_ops)
static struct mc13xxx_regulator mc13892_regulators[] = {
MC13892_DEFINE_REGU(VCOINCELL, POWERCTL0, POWERCTL0, mc13892_vcoincell),
MC13892_SW_DEFINE(SW1, SWITCHERS0, SWITCHERS0, mc13892_sw1),
MC13892_SW_DEFINE(SW2, SWITCHERS1, SWITCHERS1, mc13892_sw),
MC13892_SW_DEFINE(SW3, SWITCHERS2, SWITCHERS2, mc13892_sw),
MC13892_SW_DEFINE(SW4, SWITCHERS3, SWITCHERS3, mc13892_sw),
MC13892_FIXED_DEFINE(SWBST, SWITCHERS5, mc13892_swbst),
MC13892_FIXED_DEFINE(VIOHI, REGULATORMODE0, mc13892_viohi),
MC13892_DEFINE_REGU(VPLL, REGULATORMODE0, REGULATORSETTING0,
MC13892_DEFINE_REGU(VCOINCELL, vcoincell, POWERCTL0, POWERCTL0, mc13892_vcoincell),
MC13892_SW_DEFINE(SW1, sw1, SWITCHERS0, SWITCHERS0, mc13892_sw1),
MC13892_SW_DEFINE(SW2, sw2, SWITCHERS1, SWITCHERS1, mc13892_sw),
MC13892_SW_DEFINE(SW3, sw3, SWITCHERS2, SWITCHERS2, mc13892_sw),
MC13892_SW_DEFINE(SW4, sw4, SWITCHERS3, SWITCHERS3, mc13892_sw),
MC13892_FIXED_DEFINE(SWBST, swbst, SWITCHERS5, mc13892_swbst),
MC13892_FIXED_DEFINE(VIOHI, viohi, REGULATORMODE0, mc13892_viohi),
MC13892_DEFINE_REGU(VPLL, vpll, REGULATORMODE0, REGULATORSETTING0,
mc13892_vpll),
MC13892_DEFINE_REGU(VDIG, REGULATORMODE0, REGULATORSETTING0,
MC13892_DEFINE_REGU(VDIG, vdig, REGULATORMODE0, REGULATORSETTING0,
mc13892_vdig),
MC13892_DEFINE_REGU(VSD, REGULATORMODE1, REGULATORSETTING1,
MC13892_DEFINE_REGU(VSD, vsd, REGULATORMODE1, REGULATORSETTING1,
mc13892_vsd),
MC13892_DEFINE_REGU(VUSB2, REGULATORMODE0, REGULATORSETTING0,
MC13892_DEFINE_REGU(VUSB2, vusb2, REGULATORMODE0, REGULATORSETTING0,
mc13892_vusb2),
MC13892_DEFINE_REGU(VVIDEO, REGULATORMODE1, REGULATORSETTING1,
MC13892_DEFINE_REGU(VVIDEO, vvideo, REGULATORMODE1, REGULATORSETTING1,
mc13892_vvideo),
MC13892_DEFINE_REGU(VAUDIO, REGULATORMODE1, REGULATORSETTING1,
MC13892_DEFINE_REGU(VAUDIO, vaudio, REGULATORMODE1, REGULATORSETTING1,
mc13892_vaudio),
MC13892_DEFINE_REGU(VCAM, REGULATORMODE1, REGULATORSETTING0,
MC13892_DEFINE_REGU(VCAM, vcam, REGULATORMODE1, REGULATORSETTING0,
mc13892_vcam),
MC13892_DEFINE_REGU(VGEN1, REGULATORMODE0, REGULATORSETTING0,
MC13892_DEFINE_REGU(VGEN1, vgen1, REGULATORMODE0, REGULATORSETTING0,
mc13892_vgen1),
MC13892_DEFINE_REGU(VGEN2, REGULATORMODE0, REGULATORSETTING0,
MC13892_DEFINE_REGU(VGEN2, vgen2, REGULATORMODE0, REGULATORSETTING0,
mc13892_vgen2),
MC13892_DEFINE_REGU(VGEN3, REGULATORMODE1, REGULATORSETTING0,
MC13892_DEFINE_REGU(VGEN3, vgen3, REGULATORMODE1, REGULATORSETTING0,
mc13892_vgen3),
MC13892_FIXED_DEFINE(VUSB, USB1, mc13892_vusb),
MC13892_GPO_DEFINE(GPO1, POWERMISC, mc13892_gpo),
MC13892_GPO_DEFINE(GPO2, POWERMISC, mc13892_gpo),
MC13892_GPO_DEFINE(GPO3, POWERMISC, mc13892_gpo),
MC13892_GPO_DEFINE(GPO4, POWERMISC, mc13892_gpo),
MC13892_GPO_DEFINE(PWGT1SPI, POWERMISC, mc13892_pwgtdrv),
MC13892_GPO_DEFINE(PWGT2SPI, POWERMISC, mc13892_pwgtdrv),
MC13892_FIXED_DEFINE(VUSB, vusb, USB1, mc13892_vusb),
MC13892_GPO_DEFINE(GPO1, gpo1, POWERMISC, mc13892_gpo),
MC13892_GPO_DEFINE(GPO2, gpo2, POWERMISC, mc13892_gpo),
MC13892_GPO_DEFINE(GPO3, gpo3, POWERMISC, mc13892_gpo),
MC13892_GPO_DEFINE(GPO4, gpo4, POWERMISC, mc13892_gpo),
MC13892_GPO_DEFINE(PWGT1SPI, pwgt1spi, POWERMISC, mc13892_pwgtdrv),
MC13892_GPO_DEFINE(PWGT2SPI, pwgt2spi, POWERMISC, mc13892_pwgtdrv),
};
static int mc13892_powermisc_rmw(struct mc13xxx_regulator_priv *priv, u32 mask,
@ -387,7 +387,7 @@ static int mc13892_gpo_regulator_is_enabled(struct regulator_dev *rdev)
}
static struct regulator_ops mc13892_gpo_regulator_ops = {
static const struct regulator_ops mc13892_gpo_regulator_ops = {
.enable = mc13892_gpo_regulator_enable,
.disable = mc13892_gpo_regulator_disable,
.is_enabled = mc13892_gpo_regulator_is_enabled,
@ -479,7 +479,7 @@ static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev,
return ret;
}
static struct regulator_ops mc13892_sw_regulator_ops = {
static const struct regulator_ops mc13892_sw_regulator_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.set_voltage_sel = mc13892_sw_regulator_set_voltage_sel,

4
drivers/regulator/mc13xxx-regulator-core.c
View File

@ -99,7 +99,7 @@ static int mc13xxx_regulator_get_voltage(struct regulator_dev *rdev)
return rdev->desc->volt_table[val];
}
struct regulator_ops mc13xxx_regulator_ops = {
const struct regulator_ops mc13xxx_regulator_ops = {
.enable = mc13xxx_regulator_enable,
.disable = mc13xxx_regulator_disable,
.is_enabled = mc13xxx_regulator_is_enabled,
@ -127,7 +127,7 @@ int mc13xxx_fixed_regulator_set_voltage(struct regulator_dev *rdev, int min_uV,
}
EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_set_voltage);
struct regulator_ops mc13xxx_fixed_regulator_ops = {
const struct regulator_ops mc13xxx_fixed_regulator_ops = {
.enable = mc13xxx_regulator_enable,
.disable = mc13xxx_regulator_disable,
.is_enabled = mc13xxx_regulator_is_enabled,

24
drivers/regulator/mc13xxx.h
View File

@ -53,13 +53,13 @@ static inline struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt(
}
#endif
extern struct regulator_ops mc13xxx_regulator_ops;
extern struct regulator_ops mc13xxx_fixed_regulator_ops;
extern const struct regulator_ops mc13xxx_regulator_ops;
extern const struct regulator_ops mc13xxx_fixed_regulator_ops;
#define MC13xxx_DEFINE(prefix, _name, _reg, _vsel_reg, _voltages, _ops) \
#define MC13xxx_DEFINE(prefix, _name, _node, _reg, _vsel_reg, _voltages, _ops) \
[prefix ## _name] = { \
.desc = { \
.name = #_name, \
.name = #_node, \
.n_voltages = ARRAY_SIZE(_voltages), \
.volt_table = _voltages, \
.ops = &_ops, \
@ -74,10 +74,10 @@ extern struct regulator_ops mc13xxx_fixed_regulator_ops;
.vsel_mask = prefix ## _vsel_reg ## _ ## _name ## VSEL_M,\
}
#define MC13xxx_FIXED_DEFINE(prefix, _name, _reg, _voltages, _ops) \
#define MC13xxx_FIXED_DEFINE(prefix, _name, _node, _reg, _voltages, _ops) \
[prefix ## _name] = { \
.desc = { \
.name = #_name, \
.name = #_node, \
.n_voltages = ARRAY_SIZE(_voltages), \
.volt_table = _voltages, \
.ops = &_ops, \
@ -89,10 +89,10 @@ extern struct regulator_ops mc13xxx_fixed_regulator_ops;
.enable_bit = prefix ## _reg ## _ ## _name ## EN, \
}
#define MC13xxx_GPO_DEFINE(prefix, _name, _reg, _voltages, _ops) \
#define MC13xxx_GPO_DEFINE(prefix, _name, _node, _reg, _voltages, _ops) \
[prefix ## _name] = { \
.desc = { \
.name = #_name, \
.name = #_node, \
.n_voltages = ARRAY_SIZE(_voltages), \
.volt_table = _voltages, \
.ops = &_ops, \
@ -104,9 +104,9 @@ extern struct regulator_ops mc13xxx_fixed_regulator_ops;
.enable_bit = prefix ## _reg ## _ ## _name ## EN, \
}
#define MC13xxx_DEFINE_SW(_name, _reg, _vsel_reg, _voltages, ops) \
MC13xxx_DEFINE(SW, _name, _reg, _vsel_reg, _voltages, ops)
#define MC13xxx_DEFINE_REGU(_name, _reg, _vsel_reg, _voltages, ops) \
MC13xxx_DEFINE(REGU, _name, _reg, _vsel_reg, _voltages, ops)
#define MC13xxx_DEFINE_SW(_name, _node, _reg, _vsel_reg, _voltages, ops) \
MC13xxx_DEFINE(SW, _name, _node, _reg, _vsel_reg, _voltages, ops)
#define MC13xxx_DEFINE_REGU(_name, _node, _reg, _vsel_reg, _voltages, ops) \
MC13xxx_DEFINE(REGU, _name, _node, _reg, _vsel_reg, _voltages, ops)
#endif

2
drivers/regulator/mcp16502.c
View File

@ -17,6 +17,7 @@
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/suspend.h>
#include <linux/gpio/consumer.h>
#define VDD_LOW_SEL 0x0D
#define VDD_HIGH_SEL 0x3F
@ -546,7 +547,6 @@ static struct i2c_driver mcp16502_drv = {
module_i2c_driver(mcp16502_drv);
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("MCP16502 PMIC driver");
MODULE_AUTHOR("Andrei Stefanescu andrei.stefanescu@microchip.com");

10
drivers/regulator/mt6311-regulator.c
View File

@ -38,13 +38,9 @@ static const struct regmap_config mt6311_regmap_config = {
#define MT6311_MAX_UV 1393750
#define MT6311_STEP_UV 6250
static const struct regulator_linear_range buck_volt_range[] = {
REGULATOR_LINEAR_RANGE(MT6311_MIN_UV, 0, 0x7f, MT6311_STEP_UV),
};
static const struct regulator_ops mt6311_buck_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
@ -71,8 +67,6 @@ static const struct regulator_ops mt6311_ldo_ops = {
.min_uV = MT6311_MIN_UV,\
.uV_step = MT6311_STEP_UV,\
.owner = THIS_MODULE,\
.linear_ranges = buck_volt_range, \
.n_linear_ranges = ARRAY_SIZE(buck_volt_range), \
.enable_reg = MT6311_VDVFS11_CON9,\
.enable_mask = MT6311_PMIC_VDVFS11_EN_MASK,\
.vsel_reg = MT6311_VDVFS11_CON12,\

4
drivers/regulator/of_regulator.c
View File

@ -255,7 +255,7 @@ static void of_get_regulation_constraints(struct device_node *np,
* @desc: regulator description
*
* Populates regulator_init_data structure by extracting data from device
* tree node, returns a pointer to the populated struture or NULL if memory
* tree node, returns a pointer to the populated structure or NULL if memory
* alloc fails.
*/
struct regulator_init_data *of_get_regulator_init_data(struct device *dev,
@ -547,7 +547,7 @@ bool of_check_coupling_data(struct regulator_dev *rdev)
NULL);
if (c_n_phandles != n_phandles) {
dev_err(&rdev->dev, "number of couped reg phandles mismatch\n");
dev_err(&rdev->dev, "number of coupled reg phandles mismatch\n");
ret = false;
goto clean;
}

2
drivers/regulator/palmas-regulator.c
View File

@ -382,7 +382,7 @@ static struct palmas_sleep_requestor_info tps65917_sleep_req_info[] = {
EXTERNAL_REQUESTOR_TPS65917(LDO5, 2, 4),
};
static unsigned int palmas_smps_ramp_delay[4] = {0, 10000, 5000, 2500};
static const unsigned int palmas_smps_ramp_delay[4] = {0, 10000, 5000, 2500};
#define SMPS_CTRL_MODE_OFF 0x00
#define SMPS_CTRL_MODE_ON 0x01

62
drivers/regulator/pv88060-regulator.c
View File

@ -53,10 +53,6 @@ enum {
struct pv88060_regulator {
struct regulator_desc desc;
/* Current limiting */
unsigned n_current_limits;
const int *current_limits;
unsigned int limit_mask;
unsigned int conf; /* buck configuration register */
};
@ -75,7 +71,7 @@ static const struct regmap_config pv88060_regmap_config = {
* Entry indexes corresponds to register values.
*/
static const int pv88060_buck1_limits[] = {
static const unsigned int pv88060_buck1_limits[] = {
1496000, 2393000, 3291000, 4189000
};
@ -128,40 +124,6 @@ static int pv88060_buck_set_mode(struct regulator_dev *rdev,
PV88060_BUCK_MODE_MASK, val);
}
static int pv88060_set_current_limit(struct regulator_dev *rdev, int min,
int max)
{
struct pv88060_regulator *info = rdev_get_drvdata(rdev);
int i;
/* search for closest to maximum */
for (i = info->n_current_limits; i >= 0; i--) {
if (min <= info->current_limits[i]
&& max >= info->current_limits[i]) {
return regmap_update_bits(rdev->regmap,
info->conf,
info->limit_mask,
i << PV88060_BUCK_ILIM_SHIFT);
}
}
return -EINVAL;
}
static int pv88060_get_current_limit(struct regulator_dev *rdev)
{
struct pv88060_regulator *info = rdev_get_drvdata(rdev);
unsigned int data;
int ret;
ret = regmap_read(rdev->regmap, info->conf, &data);
if (ret < 0)
return ret;
data = (data & info->limit_mask) >> PV88060_BUCK_ILIM_SHIFT;
return info->current_limits[data];
}
static const struct regulator_ops pv88060_buck_ops = {
.get_mode = pv88060_buck_get_mode,
.set_mode = pv88060_buck_set_mode,
@ -171,8 +133,8 @@ static const struct regulator_ops pv88060_buck_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
.set_current_limit = pv88060_set_current_limit,
.get_current_limit = pv88060_get_current_limit,
.set_current_limit = regulator_set_current_limit_regmap,
.get_current_limit = regulator_get_current_limit_regmap,
};
static const struct regulator_ops pv88060_ldo_ops = {
@ -184,6 +146,12 @@ static const struct regulator_ops pv88060_ldo_ops = {
.list_voltage = regulator_list_voltage_linear,
};
static const struct regulator_ops pv88060_sw_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
#define PV88060_BUCK(chip, regl_name, min, step, max, limits_array) \
{\
.desc = {\
@ -201,10 +169,11 @@ static const struct regulator_ops pv88060_ldo_ops = {
.enable_mask = PV88060_BUCK_EN, \
.vsel_reg = PV88060_REG_##regl_name##_CONF0,\
.vsel_mask = PV88060_VBUCK_MASK,\
.curr_table = limits_array,\
.n_current_limits = ARRAY_SIZE(limits_array),\
.csel_reg = PV88060_REG_##regl_name##_CONF1,\
.csel_mask = PV88060_BUCK_ILIM_MASK,\
},\
.current_limits = limits_array,\
.n_current_limits = ARRAY_SIZE(limits_array),\
.limit_mask = PV88060_BUCK_ILIM_MASK, \
.conf = PV88060_REG_##regl_name##_CONF1,\
}
@ -237,9 +206,8 @@ static const struct regulator_ops pv88060_ldo_ops = {
.regulators_node = of_match_ptr("regulators"),\
.type = REGULATOR_VOLTAGE,\
.owner = THIS_MODULE,\
.ops = &pv88060_ldo_ops,\
.min_uV = max,\
.uV_step = 0,\
.ops = &pv88060_sw_ops,\
.fixed_uV = max,\
.n_voltages = 1,\
.enable_reg = PV88060_REG_##regl_name##_CONF,\
.enable_mask = PV88060_SW_EN,\

55
drivers/regulator/pv88080-regulator.c
View File

@ -45,12 +45,7 @@ enum pv88080_types {
struct pv88080_regulator {
struct regulator_desc desc;
/* Current limiting */
unsigned int n_current_limits;
const int *current_limits;
unsigned int limit_mask;
unsigned int mode_reg;
unsigned int limit_reg;
unsigned int conf2;
unsigned int conf5;
};
@ -102,11 +97,11 @@ static const struct regmap_config pv88080_regmap_config = {
* Entry indexes corresponds to register values.
*/
static const int pv88080_buck1_limits[] = {
static const unsigned int pv88080_buck1_limits[] = {
3230000, 5130000, 6960000, 8790000
};
static const int pv88080_buck23_limits[] = {
static const unsigned int pv88080_buck23_limits[] = {
1496000, 2393000, 3291000, 4189000
};
@ -272,40 +267,6 @@ static int pv88080_buck_set_mode(struct regulator_dev *rdev,
PV88080_BUCK1_MODE_MASK, val);
}
static int pv88080_set_current_limit(struct regulator_dev *rdev, int min,
int max)
{
struct pv88080_regulator *info = rdev_get_drvdata(rdev);
int i;
/* search for closest to maximum */
for (i = info->n_current_limits; i >= 0; i--) {
if (min <= info->current_limits[i]
&& max >= info->current_limits[i]) {
return regmap_update_bits(rdev->regmap,
info->limit_reg,
info->limit_mask,
i << PV88080_BUCK1_ILIM_SHIFT);
}
}
return -EINVAL;
}
static int pv88080_get_current_limit(struct regulator_dev *rdev)
{
struct pv88080_regulator *info = rdev_get_drvdata(rdev);
unsigned int data;
int ret;
ret = regmap_read(rdev->regmap, info->limit_reg, &data);
if (ret < 0)
return ret;
data = (data & info->limit_mask) >> PV88080_BUCK1_ILIM_SHIFT;
return info->current_limits[data];
}
static const struct regulator_ops pv88080_buck_ops = {
.get_mode = pv88080_buck_get_mode,
.set_mode = pv88080_buck_set_mode,
@ -315,8 +276,8 @@ static const struct regulator_ops pv88080_buck_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
.set_current_limit = pv88080_set_current_limit,
.get_current_limit = pv88080_get_current_limit,
.set_current_limit = regulator_set_current_limit_regmap,
.get_current_limit = regulator_get_current_limit_regmap,
};
static const struct regulator_ops pv88080_hvbuck_ops = {
@ -341,9 +302,9 @@ static const struct regulator_ops pv88080_hvbuck_ops = {
.min_uV = min, \
.uV_step = step, \
.n_voltages = ((max) - (min))/(step) + 1, \
.curr_table = limits_array, \
.n_current_limits = ARRAY_SIZE(limits_array), \
},\
.current_limits = limits_array, \
.n_current_limits = ARRAY_SIZE(limits_array), \
}
#define PV88080_HVBUCK(chip, regl_name, min, step, max) \
@ -521,9 +482,9 @@ static int pv88080_i2c_probe(struct i2c_client *i2c,
if (init_data)
config.init_data = &init_data[i];
pv88080_regulator_info[i].limit_reg
pv88080_regulator_info[i].desc.csel_reg
= regmap_config->buck_regmap[i].buck_limit_reg;
pv88080_regulator_info[i].limit_mask
pv88080_regulator_info[i].desc.csel_mask
= regmap_config->buck_regmap[i].buck_limit_mask;
pv88080_regulator_info[i].mode_reg
= regmap_config->buck_regmap[i].buck_mode_reg;

53
drivers/regulator/pv88090-regulator.c
View File

@ -42,10 +42,6 @@ enum {
struct pv88090_regulator {
struct regulator_desc desc;
/* Current limiting */
unsigned int n_current_limits;
const int *current_limits;
unsigned int limit_mask;
unsigned int conf;
unsigned int conf2;
};
@ -71,14 +67,14 @@ static const struct regmap_config pv88090_regmap_config = {
* Entry indexes corresponds to register values.
*/
static const int pv88090_buck1_limits[] = {
static const unsigned int pv88090_buck1_limits[] = {
220000, 440000, 660000, 880000, 1100000, 1320000, 1540000, 1760000,
1980000, 2200000, 2420000, 2640000, 2860000, 3080000, 3300000, 3520000,
3740000, 3960000, 4180000, 4400000, 4620000, 4840000, 5060000, 5280000,
5500000, 5720000, 5940000, 6160000, 6380000, 6600000, 6820000, 7040000
};
static const int pv88090_buck23_limits[] = {
static const unsigned int pv88090_buck23_limits[] = {
1496000, 2393000, 3291000, 4189000
};
@ -150,40 +146,6 @@ static int pv88090_buck_set_mode(struct regulator_dev *rdev,
PV88090_BUCK1_MODE_MASK, val);
}
static int pv88090_set_current_limit(struct regulator_dev *rdev, int min,
int max)
{
struct pv88090_regulator *info = rdev_get_drvdata(rdev);
int i;
/* search for closest to maximum */
for (i = info->n_current_limits; i >= 0; i--) {
if (min <= info->current_limits[i]
&& max >= info->current_limits[i]) {
return regmap_update_bits(rdev->regmap,
info->conf,
info->limit_mask,
i << PV88090_BUCK1_ILIM_SHIFT);
}
}
return -EINVAL;
}
static int pv88090_get_current_limit(struct regulator_dev *rdev)
{
struct pv88090_regulator *info = rdev_get_drvdata(rdev);
unsigned int data;
int ret;
ret = regmap_read(rdev->regmap, info->conf, &data);
if (ret < 0)
return ret;
data = (data & info->limit_mask) >> PV88090_BUCK1_ILIM_SHIFT;
return info->current_limits[data];
}
static const struct regulator_ops pv88090_buck_ops = {
.get_mode = pv88090_buck_get_mode,
.set_mode = pv88090_buck_set_mode,
@ -193,8 +155,8 @@ static const struct regulator_ops pv88090_buck_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
.set_current_limit = pv88090_set_current_limit,
.get_current_limit = pv88090_get_current_limit,
.set_current_limit = regulator_set_current_limit_regmap,
.get_current_limit = regulator_get_current_limit_regmap,
};
static const struct regulator_ops pv88090_ldo_ops = {
@ -223,10 +185,11 @@ static const struct regulator_ops pv88090_ldo_ops = {
.enable_mask = PV88090_##regl_name##_EN, \
.vsel_reg = PV88090_REG_##regl_name##_CONF0, \
.vsel_mask = PV88090_V##regl_name##_MASK, \
.curr_table = limits_array, \
.n_current_limits = ARRAY_SIZE(limits_array), \
.csel_reg = PV88090_REG_##regl_name##_CONF1, \
.csel_mask = PV88090_##regl_name##_ILIM_MASK, \
},\
.current_limits = limits_array, \
.n_current_limits = ARRAY_SIZE(limits_array), \
.limit_mask = PV88090_##regl_name##_ILIM_MASK, \
.conf = PV88090_REG_##regl_name##_CONF1, \
.conf2 = PV88090_REG_##regl_name##_CONF2, \
}

17
drivers/regulator/pwm-regulator.c
View File

@ -40,9 +40,6 @@ struct pwm_regulator_data {
/* regulator descriptor */
struct regulator_desc desc;
/* Regulator ops */
struct regulator_ops ops;
int state;
/* Enable GPIO */
@ -231,7 +228,7 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
return 0;
}
static struct regulator_ops pwm_regulator_voltage_table_ops = {
static const struct regulator_ops pwm_regulator_voltage_table_ops = {
.set_voltage_sel = pwm_regulator_set_voltage_sel,
.get_voltage_sel = pwm_regulator_get_voltage_sel,
.list_voltage = pwm_regulator_list_voltage,
@ -241,7 +238,7 @@ static struct regulator_ops pwm_regulator_voltage_table_ops = {
.is_enabled = pwm_regulator_is_enabled,
};
static struct regulator_ops pwm_regulator_voltage_continuous_ops = {
static const struct regulator_ops pwm_regulator_voltage_continuous_ops = {
.get_voltage = pwm_regulator_get_voltage,
.set_voltage = pwm_regulator_set_voltage,
.enable = pwm_regulator_enable,
@ -249,7 +246,7 @@ static struct regulator_ops pwm_regulator_voltage_continuous_ops = {
.is_enabled = pwm_regulator_is_enabled,
};
static struct regulator_desc pwm_regulator_desc = {
static const struct regulator_desc pwm_regulator_desc = {
.name = "pwm-regulator",
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
@ -287,9 +284,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
drvdata->state = -EINVAL;
drvdata->duty_cycle_table = duty_cycle_table;
memcpy(&drvdata->ops, &pwm_regulator_voltage_table_ops,
sizeof(drvdata->ops));
drvdata->desc.ops = &drvdata->ops;
drvdata->desc.ops = &pwm_regulator_voltage_table_ops;
drvdata->desc.n_voltages = length / sizeof(*duty_cycle_table);
return 0;
@ -301,9 +296,7 @@ static int pwm_regulator_init_continuous(struct platform_device *pdev,
u32 dutycycle_range[2] = { 0, 100 };
u32 dutycycle_unit = 100;
memcpy(&drvdata->ops, &pwm_regulator_voltage_continuous_ops,
sizeof(drvdata->ops));
drvdata->desc.ops = &drvdata->ops;
drvdata->desc.ops = &pwm_regulator_voltage_continuous_ops;
drvdata->desc.continuous_voltage_range = true;
of_property_read_u32_array(pdev->dev.of_node,

104
drivers/regulator/qcom_smd-regulator.c
View File

@ -31,6 +31,11 @@ struct qcom_rpm_reg {
int is_enabled;
int uV;
u32 load;
unsigned int enabled_updated:1;
unsigned int uv_updated:1;
unsigned int load_updated:1;
};
struct rpm_regulator_req {
@ -43,30 +48,59 @@ struct rpm_regulator_req {
#define RPM_KEY_UV 0x00007675 /* "uv" */
#define RPM_KEY_MA 0x0000616d /* "ma" */
static int rpm_reg_write_active(struct qcom_rpm_reg *vreg,
struct rpm_regulator_req *req,
size_t size)
static int rpm_reg_write_active(struct qcom_rpm_reg *vreg)
{
return qcom_rpm_smd_write(vreg->rpm,
QCOM_SMD_RPM_ACTIVE_STATE,
vreg->type,
vreg->id,
req, size);
struct rpm_regulator_req req[3];
int reqlen = 0;
int ret;
if (vreg->enabled_updated) {
req[reqlen].key = cpu_to_le32(RPM_KEY_SWEN);
req[reqlen].nbytes = cpu_to_le32(sizeof(u32));
req[reqlen].value = cpu_to_le32(vreg->is_enabled);
reqlen++;
}
if (vreg->uv_updated && vreg->is_enabled) {
req[reqlen].key = cpu_to_le32(RPM_KEY_UV);
req[reqlen].nbytes = cpu_to_le32(sizeof(u32));
req[reqlen].value = cpu_to_le32(vreg->uV);
reqlen++;
}
if (vreg->load_updated && vreg->is_enabled) {
req[reqlen].key = cpu_to_le32(RPM_KEY_MA);
req[reqlen].nbytes = cpu_to_le32(sizeof(u32));
req[reqlen].value = cpu_to_le32(vreg->load / 1000);
reqlen++;
}
if (!reqlen)
return 0;
ret = qcom_rpm_smd_write(vreg->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
vreg->type, vreg->id,
req, sizeof(req[0]) * reqlen);
if (!ret) {
vreg->enabled_updated = 0;
vreg->uv_updated = 0;
vreg->load_updated = 0;
}
return ret;
}
static int rpm_reg_enable(struct regulator_dev *rdev)
{
struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
struct rpm_regulator_req req;
int ret;
req.key = cpu_to_le32(RPM_KEY_SWEN);
req.nbytes = cpu_to_le32(sizeof(u32));
req.value = cpu_to_le32(1);
vreg->is_enabled = 1;
vreg->enabled_updated = 1;
ret = rpm_reg_write_active(vreg, &req, sizeof(req));
if (!ret)
vreg->is_enabled = 1;
ret = rpm_reg_write_active(vreg);
if (ret)
vreg->is_enabled = 0;
return ret;
}
@ -81,16 +115,14 @@ static int rpm_reg_is_enabled(struct regulator_dev *rdev)
static int rpm_reg_disable(struct regulator_dev *rdev)
{
struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
struct rpm_regulator_req req;
int ret;
req.key = cpu_to_le32(RPM_KEY_SWEN);
req.nbytes = cpu_to_le32(sizeof(u32));
req.value = 0;
vreg->is_enabled = 0;
vreg->enabled_updated = 1;
ret = rpm_reg_write_active(vreg, &req, sizeof(req));
if (!ret)
vreg->is_enabled = 0;
ret = rpm_reg_write_active(vreg);
if (ret)
vreg->is_enabled = 1;
return ret;
}
@ -108,16 +140,15 @@ static int rpm_reg_set_voltage(struct regulator_dev *rdev,
unsigned *selector)
{
struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
struct rpm_regulator_req req;
int ret = 0;
int ret;
int old_uV = vreg->uV;
req.key = cpu_to_le32(RPM_KEY_UV);
req.nbytes = cpu_to_le32(sizeof(u32));
req.value = cpu_to_le32(min_uV);
vreg->uV = min_uV;
vreg->uv_updated = 1;
ret = rpm_reg_write_active(vreg, &req, sizeof(req));
if (!ret)
vreg->uV = min_uV;
ret = rpm_reg_write_active(vreg);
if (ret)
vreg->uV = old_uV;
return ret;
}
@ -125,13 +156,16 @@ static int rpm_reg_set_voltage(struct regulator_dev *rdev,
static int rpm_reg_set_load(struct regulator_dev *rdev, int load_uA)
{
struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
struct rpm_regulator_req req;
u32 old_load = vreg->load;
int ret;
req.key = cpu_to_le32(RPM_KEY_MA);
req.nbytes = cpu_to_le32(sizeof(u32));
req.value = cpu_to_le32(load_uA / 1000);
vreg->load = load_uA;
vreg->load_updated = 1;
ret = rpm_reg_write_active(vreg);
if (ret)
vreg->load = old_load;
return rpm_reg_write_active(vreg, &req, sizeof(req));
return ret;
}
static const struct regulator_ops rpm_smps_ldo_ops = {

64
drivers/regulator/rk808-regulator.c
View File

@ -1,5 +1,5 @@
/*
* Regulator driver for Rockchip RK808/RK818
* Regulator driver for Rockchip RK805/RK808/RK818
*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
*
@ -363,28 +363,28 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
rdev->desc->enable_mask);
}
static struct regulator_ops rk805_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_voltage = rk808_set_suspend_voltage,
.set_suspend_enable = rk805_set_suspend_enable,
.set_suspend_disable = rk805_set_suspend_disable,
static const struct regulator_ops rk805_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_voltage = rk808_set_suspend_voltage,
.set_suspend_enable = rk805_set_suspend_enable,
.set_suspend_disable = rk805_set_suspend_disable,
};
static struct regulator_ops rk805_switch_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_enable = rk805_set_suspend_enable,
.set_suspend_disable = rk805_set_suspend_disable,
static const struct regulator_ops rk805_switch_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_enable = rk805_set_suspend_enable,
.set_suspend_disable = rk805_set_suspend_disable,
};
static struct regulator_ops rk808_buck1_2_ops = {
static const struct regulator_ops rk808_buck1_2_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = rk808_buck1_2_get_voltage_sel_regmap,
@ -399,7 +399,7 @@ static struct regulator_ops rk808_buck1_2_ops = {
.set_suspend_disable = rk808_set_suspend_disable,
};
static struct regulator_ops rk808_reg_ops = {
static const struct regulator_ops rk808_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@ -412,7 +412,7 @@ static struct regulator_ops rk808_reg_ops = {
.set_suspend_disable = rk808_set_suspend_disable,
};
static struct regulator_ops rk808_reg_ops_ranges = {
static const struct regulator_ops rk808_reg_ops_ranges = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@ -425,7 +425,7 @@ static struct regulator_ops rk808_reg_ops_ranges = {
.set_suspend_disable = rk808_set_suspend_disable,
};
static struct regulator_ops rk808_switch_ops = {
static const struct regulator_ops rk808_switch_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@ -433,6 +433,12 @@ static struct regulator_ops rk808_switch_ops = {
.set_suspend_disable = rk808_set_suspend_disable,
};
static const struct regulator_linear_range rk805_buck_1_2_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(712500, 0, 59, 12500),
REGULATOR_LINEAR_RANGE(1800000, 60, 62, 200000),
REGULATOR_LINEAR_RANGE(2300000, 63, 63, 0),
};
static const struct regulator_desc rk805_reg[] = {
{
.name = "DCDC_REG1",
@ -440,11 +446,11 @@ static const struct regulator_desc rk805_reg[] = {
.of_match = of_match_ptr("DCDC_REG1"),
.regulators_node = of_match_ptr("regulators"),
.id = RK805_ID_DCDC1,
.ops = &rk805_reg_ops,
.ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.min_uV = 712500,
.uV_step = 12500,
.n_voltages = 64,
.linear_ranges = rk805_buck_1_2_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
.vsel_reg = RK805_BUCK1_ON_VSEL_REG,
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK805_DCDC_EN_REG,
@ -456,11 +462,11 @@ static const struct regulator_desc rk805_reg[] = {
.of_match = of_match_ptr("DCDC_REG2"),
.regulators_node = of_match_ptr("regulators"),
.id = RK805_ID_DCDC2,
.ops = &rk805_reg_ops,
.ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.min_uV = 712500,
.uV_step = 12500,
.n_voltages = 64,
.linear_ranges = rk805_buck_1_2_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
.vsel_reg = RK805_BUCK2_ON_VSEL_REG,
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK805_DCDC_EN_REG,
@ -796,7 +802,7 @@ static struct platform_driver rk808_regulator_driver = {
module_platform_driver(rk808_regulator_driver);
MODULE_DESCRIPTION("regulator driver for the RK808/RK818 series PMICs");
MODULE_DESCRIPTION("regulator driver for the RK805/RK808/RK818 series PMICs");
MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");

4
drivers/regulator/rt5033-regulator.c
View File

@ -16,14 +16,14 @@
#include <linux/mfd/rt5033-private.h>
#include <linux/regulator/of_regulator.h>
static struct regulator_ops rt5033_safe_ldo_ops = {
static const struct regulator_ops rt5033_safe_ldo_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.list_voltage = regulator_list_voltage_linear,
};
static struct regulator_ops rt5033_buck_ops = {
static const struct regulator_ops rt5033_buck_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,

10
drivers/regulator/s2mpa01.c
View File

@ -298,13 +298,13 @@ static const struct regulator_desc regulators[] = {
regulator_desc_ldo(2, STEP_50_MV),
regulator_desc_ldo(3, STEP_50_MV),
regulator_desc_ldo(4, STEP_50_MV),
regulator_desc_ldo(5, STEP_50_MV),
regulator_desc_ldo(5, STEP_25_MV),
regulator_desc_ldo(6, STEP_25_MV),
regulator_desc_ldo(7, STEP_50_MV),
regulator_desc_ldo(8, STEP_50_MV),
regulator_desc_ldo(9, STEP_50_MV),
regulator_desc_ldo(10, STEP_50_MV),
regulator_desc_ldo(11, STEP_25_MV),
regulator_desc_ldo(11, STEP_50_MV),
regulator_desc_ldo(12, STEP_50_MV),
regulator_desc_ldo(13, STEP_50_MV),
regulator_desc_ldo(14, STEP_50_MV),
@ -315,11 +315,11 @@ static const struct regulator_desc regulators[] = {
regulator_desc_ldo(19, STEP_50_MV),
regulator_desc_ldo(20, STEP_50_MV),
regulator_desc_ldo(21, STEP_50_MV),
regulator_desc_ldo(22, STEP_25_MV),
regulator_desc_ldo(23, STEP_25_MV),
regulator_desc_ldo(22, STEP_50_MV),
regulator_desc_ldo(23, STEP_50_MV),
regulator_desc_ldo(24, STEP_50_MV),
regulator_desc_ldo(25, STEP_50_MV),
regulator_desc_ldo(26, STEP_50_MV),
regulator_desc_ldo(26, STEP_25_MV),
regulator_desc_buck1_4(1),
regulator_desc_buck1_4(2),
regulator_desc_buck1_4(3),

6
drivers/regulator/s2mps11.c
View File

@ -362,7 +362,7 @@ static const struct regulator_desc s2mps11_regulators[] = {
regulator_desc_s2mps11_ldo(32, STEP_50_MV),
regulator_desc_s2mps11_ldo(33, STEP_50_MV),
regulator_desc_s2mps11_ldo(34, STEP_50_MV),
regulator_desc_s2mps11_ldo(35, STEP_50_MV),
regulator_desc_s2mps11_ldo(35, STEP_25_MV),
regulator_desc_s2mps11_ldo(36, STEP_50_MV),
regulator_desc_s2mps11_ldo(37, STEP_50_MV),
regulator_desc_s2mps11_ldo(38, STEP_50_MV),
@ -372,8 +372,8 @@ static const struct regulator_desc s2mps11_regulators[] = {
regulator_desc_s2mps11_buck1_4(4),
regulator_desc_s2mps11_buck5,
regulator_desc_s2mps11_buck67810(6, MIN_600_MV, STEP_6_25_MV),
regulator_desc_s2mps11_buck67810(7, MIN_600_MV, STEP_6_25_MV),
regulator_desc_s2mps11_buck67810(8, MIN_600_MV, STEP_6_25_MV),
regulator_desc_s2mps11_buck67810(7, MIN_600_MV, STEP_12_5_MV),
regulator_desc_s2mps11_buck67810(8, MIN_600_MV, STEP_12_5_MV),
regulator_desc_s2mps11_buck9,
regulator_desc_s2mps11_buck67810(10, MIN_750_MV, STEP_12_5_MV),
};

8
drivers/regulator/s5m8767.c
View File

@ -115,7 +115,7 @@ static const struct sec_voltage_desc *reg_voltage_map[] = {
[S5M8767_BUCK9] = &buck_voltage_val3,
};
static unsigned int s5m8767_opmode_reg[][4] = {
static const unsigned int s5m8767_opmode_reg[][4] = {
/* {OFF, ON, LOWPOWER, SUSPEND} */
/* LDO1 ... LDO28 */
{0x0, 0x3, 0x2, 0x1}, /* LDO1 */
@ -339,13 +339,9 @@ static int s5m8767_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int new_sel)
{
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
const struct sec_voltage_desc *desc;
int reg_id = rdev_get_id(rdev);
desc = reg_voltage_map[reg_id];
if ((old_sel < new_sel) && s5m8767->ramp_delay)
return DIV_ROUND_UP(desc->step * (new_sel - old_sel),
return DIV_ROUND_UP(rdev->desc->uV_step * (new_sel - old_sel),
s5m8767->ramp_delay * 1000);
return 0;
}

121
drivers/regulator/stm32-vrefbuf.c
View File

@ -15,6 +15,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
#include <linux/pm_runtime.h>
/* STM32 VREFBUF registers */
#define STM32_VREFBUF_CSR 0x00
@ -25,9 +26,12 @@
#define STM32_HIZ BIT(1)
#define STM32_ENVR BIT(0)
#define STM32_VREFBUF_AUTO_SUSPEND_DELAY_MS 10
struct stm32_vrefbuf {
void __iomem *base;
struct clk *clk;
struct device *dev;
};
static const unsigned int stm32_vrefbuf_voltages[] = {
@ -38,9 +42,16 @@ static const unsigned int stm32_vrefbuf_voltages[] = {
static int stm32_vrefbuf_enable(struct regulator_dev *rdev)
{
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
u32 val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
u32 val;
int ret;
ret = pm_runtime_get_sync(priv->dev);
if (ret < 0) {
pm_runtime_put_noidle(priv->dev);
return ret;
}
val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
val = (val & ~STM32_HIZ) | STM32_ENVR;
writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
@ -59,45 +70,95 @@ static int stm32_vrefbuf_enable(struct regulator_dev *rdev)
writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
}
pm_runtime_mark_last_busy(priv->dev);
pm_runtime_put_autosuspend(priv->dev);
return ret;
}
static int stm32_vrefbuf_disable(struct regulator_dev *rdev)
{
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
u32 val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
u32 val;
int ret;
ret = pm_runtime_get_sync(priv->dev);
if (ret < 0) {
pm_runtime_put_noidle(priv->dev);
return ret;
}
val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
val = (val & ~STM32_ENVR) | STM32_HIZ;
writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
pm_runtime_mark_last_busy(priv->dev);
pm_runtime_put_autosuspend(priv->dev);
return 0;
}
static int stm32_vrefbuf_is_enabled(struct regulator_dev *rdev)
{
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
int ret;
return readl_relaxed(priv->base + STM32_VREFBUF_CSR) & STM32_ENVR;
ret = pm_runtime_get_sync(priv->dev);
if (ret < 0) {
pm_runtime_put_noidle(priv->dev);
return ret;
}
ret = readl_relaxed(priv->base + STM32_VREFBUF_CSR) & STM32_ENVR;
pm_runtime_mark_last_busy(priv->dev);
pm_runtime_put_autosuspend(priv->dev);
return ret;
}
static int stm32_vrefbuf_set_voltage_sel(struct regulator_dev *rdev,
unsigned sel)
{
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
u32 val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
u32 val;
int ret;
ret = pm_runtime_get_sync(priv->dev);
if (ret < 0) {
pm_runtime_put_noidle(priv->dev);
return ret;
}
val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
val = (val & ~STM32_VRS) | FIELD_PREP(STM32_VRS, sel);
writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
pm_runtime_mark_last_busy(priv->dev);
pm_runtime_put_autosuspend(priv->dev);
return 0;
}
static int stm32_vrefbuf_get_voltage_sel(struct regulator_dev *rdev)
{
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
u32 val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
u32 val;
int ret;
return FIELD_GET(STM32_VRS, val);
ret = pm_runtime_get_sync(priv->dev);
if (ret < 0) {
pm_runtime_put_noidle(priv->dev);
return ret;
}
val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
ret = FIELD_GET(STM32_VRS, val);
pm_runtime_mark_last_busy(priv->dev);
pm_runtime_put_autosuspend(priv->dev);
return ret;
}
static const struct regulator_ops stm32_vrefbuf_volt_ops = {
@ -130,6 +191,7 @@ static int stm32_vrefbuf_probe(struct platform_device *pdev)
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->dev = &pdev->dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->base = devm_ioremap_resource(&pdev->dev, res);
@ -140,10 +202,17 @@ static int stm32_vrefbuf_probe(struct platform_device *pdev)
if (IS_ERR(priv->clk))
return PTR_ERR(priv->clk);
pm_runtime_get_noresume(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev,
STM32_VREFBUF_AUTO_SUSPEND_DELAY_MS);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_enable(&pdev->dev);
ret = clk_prepare_enable(priv->clk);
if (ret) {
dev_err(&pdev->dev, "clk prepare failed with error %d\n", ret);
return ret;
goto err_pm_stop;
}
config.dev = &pdev->dev;
@ -161,10 +230,17 @@ static int stm32_vrefbuf_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, rdev);
pm_runtime_mark_last_busy(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);
return 0;
err_clk_dis:
clk_disable_unprepare(priv->clk);
err_pm_stop:
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
return ret;
}
@ -174,10 +250,40 @@ static int stm32_vrefbuf_remove(struct platform_device *pdev)
struct regulator_dev *rdev = platform_get_drvdata(pdev);
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
pm_runtime_get_sync(&pdev->dev);
regulator_unregister(rdev);
clk_disable_unprepare(priv->clk);
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
return 0;
};
static int __maybe_unused stm32_vrefbuf_runtime_suspend(struct device *dev)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
clk_disable_unprepare(priv->clk);
return 0;
}
static int __maybe_unused stm32_vrefbuf_runtime_resume(struct device *dev)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
return clk_prepare_enable(priv->clk);
}
static const struct dev_pm_ops stm32_vrefbuf_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
pm_runtime_force_resume)
SET_RUNTIME_PM_OPS(stm32_vrefbuf_runtime_suspend,
stm32_vrefbuf_runtime_resume,
NULL)
};
static const struct of_device_id stm32_vrefbuf_of_match[] = {
@ -192,6 +298,7 @@ static struct platform_driver stm32_vrefbuf_driver = {
.driver = {
.name = "stm32-vrefbuf",
.of_match_table = of_match_ptr(stm32_vrefbuf_of_match),
.pm = &stm32_vrefbuf_pm_ops,
},
};
module_platform_driver(stm32_vrefbuf_driver);

300
drivers/regulator/stpmic1_regulator.c
View File

@ -12,8 +12,10 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <dt-bindings/mfd/st,stpmic1.h>
/**
* stpmic1 regulator description
* stpmic1 regulator description: this structure is used as driver data
* @desc: regulator framework description
* @mask_reset_reg: mask reset register address
* @mask_reset_mask: mask rank and mask reset register mask
@ -28,28 +30,9 @@ struct stpmic1_regulator_cfg {
u8 icc_mask;
};
/**
* stpmic1 regulator data: this structure is used as driver data
* @regul_id: regulator id
* @reg_node: DT node of regulator (unused on non-DT platforms)
* @cfg: stpmic specific regulator description
* @mask_reset: mask_reset bit value
* @irq_curlim: current limit interrupt number
* @regmap: point to parent regmap structure
*/
struct stpmic1_regulator {
unsigned int regul_id;
struct device_node *reg_node;
struct stpmic1_regulator_cfg *cfg;
u8 mask_reset;
int irq_curlim;
struct regmap *regmap;
};
static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode);
static unsigned int stpmic1_get_mode(struct regulator_dev *rdev);
static int stpmic1_set_icc(struct regulator_dev *rdev);
static int stpmic1_regulator_parse_dt(void *driver_data);
static unsigned int stpmic1_map_mode(unsigned int mode);
enum {
@ -72,15 +55,13 @@ enum {
/* Enable time worst case is 5000mV/(2250uV/uS) */
#define PMIC_ENABLE_TIME_US 2200
#define STPMIC1_BUCK_MODE_NORMAL 0
#define STPMIC1_BUCK_MODE_LP BUCK_HPLP_ENABLE_MASK
struct regulator_linear_range buck1_ranges[] = {
REGULATOR_LINEAR_RANGE(600000, 0, 30, 25000),
REGULATOR_LINEAR_RANGE(1350000, 31, 63, 0),
static const struct regulator_linear_range buck1_ranges[] = {
REGULATOR_LINEAR_RANGE(725000, 0, 4, 0),
REGULATOR_LINEAR_RANGE(725000, 5, 36, 25000),
REGULATOR_LINEAR_RANGE(1500000, 37, 63, 0),
};
struct regulator_linear_range buck2_ranges[] = {
static const struct regulator_linear_range buck2_ranges[] = {
REGULATOR_LINEAR_RANGE(1000000, 0, 17, 0),
REGULATOR_LINEAR_RANGE(1050000, 18, 19, 0),
REGULATOR_LINEAR_RANGE(1100000, 20, 21, 0),
@ -94,7 +75,7 @@ struct regulator_linear_range buck2_ranges[] = {
REGULATOR_LINEAR_RANGE(1500000, 36, 63, 0),
};
struct regulator_linear_range buck3_ranges[] = {
static const struct regulator_linear_range buck3_ranges[] = {
REGULATOR_LINEAR_RANGE(1000000, 0, 19, 0),
REGULATOR_LINEAR_RANGE(1100000, 20, 23, 0),
REGULATOR_LINEAR_RANGE(1200000, 24, 27, 0),
@ -102,10 +83,9 @@ struct regulator_linear_range buck3_ranges[] = {
REGULATOR_LINEAR_RANGE(1400000, 32, 35, 0),
REGULATOR_LINEAR_RANGE(1500000, 36, 55, 100000),
REGULATOR_LINEAR_RANGE(3400000, 56, 63, 0),
};
struct regulator_linear_range buck4_ranges[] = {
static const struct regulator_linear_range buck4_ranges[] = {
REGULATOR_LINEAR_RANGE(600000, 0, 27, 25000),
REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0),
REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0),
@ -113,24 +93,21 @@ struct regulator_linear_range buck4_ranges[] = {
REGULATOR_LINEAR_RANGE(1450000, 34, 35, 0),
REGULATOR_LINEAR_RANGE(1500000, 36, 60, 100000),
REGULATOR_LINEAR_RANGE(3900000, 61, 63, 0),
};
struct regulator_linear_range ldo1_ranges[] = {
static const struct regulator_linear_range ldo1_ranges[] = {
REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0),
};
struct regulator_linear_range ldo2_ranges[] = {
static const struct regulator_linear_range ldo2_ranges[] = {
REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0),
};
struct regulator_linear_range ldo3_ranges[] = {
static const struct regulator_linear_range ldo3_ranges[] = {
REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0),
@ -138,18 +115,18 @@ struct regulator_linear_range ldo3_ranges[] = {
REGULATOR_LINEAR_RANGE(500000, 31, 31, 0),
};
struct regulator_linear_range ldo5_ranges[] = {
static const struct regulator_linear_range ldo5_ranges[] = {
REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
REGULATOR_LINEAR_RANGE(1700000, 8, 30, 100000),
REGULATOR_LINEAR_RANGE(3900000, 31, 31, 0),
};
struct regulator_linear_range ldo6_ranges[] = {
static const struct regulator_linear_range ldo6_ranges[] = {
REGULATOR_LINEAR_RANGE(900000, 0, 24, 100000),
REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0),
};
static struct regulator_ops stpmic1_ldo_ops = {
static const struct regulator_ops stpmic1_ldo_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.is_enabled = regulator_is_enabled_regmap,
@ -157,11 +134,10 @@ static struct regulator_ops stpmic1_ldo_ops = {
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_pull_down = regulator_set_pull_down_regmap,
.set_over_current_protection = stpmic1_set_icc,
};
static struct regulator_ops stpmic1_ldo3_ops = {
static const struct regulator_ops stpmic1_ldo3_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_iterate,
.is_enabled = regulator_is_enabled_regmap,
@ -169,21 +145,19 @@ static struct regulator_ops stpmic1_ldo3_ops = {
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_pull_down = regulator_set_pull_down_regmap,
.get_bypass = regulator_get_bypass_regmap,
.set_bypass = regulator_set_bypass_regmap,
.set_over_current_protection = stpmic1_set_icc,
};
static struct regulator_ops stpmic1_ldo4_fixed_regul_ops = {
static const struct regulator_ops stpmic1_ldo4_fixed_regul_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.set_pull_down = regulator_set_pull_down_regmap,
.set_over_current_protection = stpmic1_set_icc,
};
static struct regulator_ops stpmic1_buck_ops = {
static const struct regulator_ops stpmic1_buck_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.is_enabled = regulator_is_enabled_regmap,
@ -197,20 +171,27 @@ static struct regulator_ops stpmic1_buck_ops = {
.set_over_current_protection = stpmic1_set_icc,
};
static struct regulator_ops stpmic1_vref_ddr_ops = {
static const struct regulator_ops stpmic1_vref_ddr_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.set_pull_down = regulator_set_pull_down_regmap,
};
static struct regulator_ops stpmic1_switch_regul_ops = {
static const struct regulator_ops stpmic1_boost_regul_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.set_over_current_protection = stpmic1_set_icc,
};
static const struct regulator_ops stpmic1_switch_regul_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.set_over_current_protection = stpmic1_set_icc,
.set_active_discharge = regulator_set_active_discharge_regmap,
};
#define REG_LDO(ids, base) { \
.name = #ids, \
.id = STPMIC1_##ids, \
@ -227,8 +208,6 @@ static struct regulator_ops stpmic1_switch_regul_ops = {
.enable_val = 1, \
.disable_val = 0, \
.enable_time = PMIC_ENABLE_TIME_US, \
.pull_down_reg = ids##_PULL_DOWN_REG, \
.pull_down_mask = ids##_PULL_DOWN_MASK, \
.supply_name = #base, \
}
@ -252,8 +231,6 @@ static struct regulator_ops stpmic1_switch_regul_ops = {
.bypass_mask = LDO_BYPASS_MASK, \
.bypass_val_on = LDO_BYPASS_MASK, \
.bypass_val_off = 0, \
.pull_down_reg = ids##_PULL_DOWN_REG, \
.pull_down_mask = ids##_PULL_DOWN_MASK, \
.supply_name = #base, \
}
@ -271,8 +248,6 @@ static struct regulator_ops stpmic1_switch_regul_ops = {
.enable_val = 1, \
.disable_val = 0, \
.enable_time = PMIC_ENABLE_TIME_US, \
.pull_down_reg = ids##_PULL_DOWN_REG, \
.pull_down_mask = ids##_PULL_DOWN_MASK, \
.supply_name = #base, \
}
@ -312,12 +287,27 @@ static struct regulator_ops stpmic1_switch_regul_ops = {
.enable_val = 1, \
.disable_val = 0, \
.enable_time = PMIC_ENABLE_TIME_US, \
.pull_down_reg = ids##_PULL_DOWN_REG, \
.pull_down_mask = ids##_PULL_DOWN_MASK, \
.supply_name = #base, \
}
#define REG_SWITCH(ids, base, reg, mask, val) { \
#define REG_BOOST(ids, base) { \
.name = #ids, \
.id = STPMIC1_##ids, \
.n_voltages = 1, \
.ops = &stpmic1_boost_regul_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = 0, \
.fixed_uV = 5000000, \
.enable_reg = BST_SW_CR, \
.enable_mask = BOOST_ENABLED, \
.enable_val = BOOST_ENABLED, \
.disable_val = 0, \
.enable_time = PMIC_ENABLE_TIME_US, \
.supply_name = #base, \
}
#define REG_VBUS_OTG(ids, base) { \
.name = #ids, \
.id = STPMIC1_##ids, \
.n_voltages = 1, \
@ -326,15 +316,38 @@ static struct regulator_ops stpmic1_switch_regul_ops = {
.owner = THIS_MODULE, \
.min_uV = 0, \
.fixed_uV = 5000000, \
.enable_reg = (reg), \
.enable_mask = (mask), \
.enable_val = (val), \
.enable_reg = BST_SW_CR, \
.enable_mask = USBSW_OTG_SWITCH_ENABLED, \
.enable_val = USBSW_OTG_SWITCH_ENABLED, \
.disable_val = 0, \
.enable_time = PMIC_ENABLE_TIME_US, \
.supply_name = #base, \
.active_discharge_reg = BST_SW_CR, \
.active_discharge_mask = VBUS_OTG_DISCHARGE, \
.active_discharge_on = VBUS_OTG_DISCHARGE, \
}
struct stpmic1_regulator_cfg stpmic1_regulator_cfgs[] = {
#define REG_SW_OUT(ids, base) { \
.name = #ids, \
.id = STPMIC1_##ids, \
.n_voltages = 1, \
.ops = &stpmic1_switch_regul_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = 0, \
.fixed_uV = 5000000, \
.enable_reg = BST_SW_CR, \
.enable_mask = SWIN_SWOUT_ENABLED, \
.enable_val = SWIN_SWOUT_ENABLED, \
.disable_val = 0, \
.enable_time = PMIC_ENABLE_TIME_US, \
.supply_name = #base, \
.active_discharge_reg = BST_SW_CR, \
.active_discharge_mask = SW_OUT_DISCHARGE, \
.active_discharge_on = SW_OUT_DISCHARGE, \
}
static const struct stpmic1_regulator_cfg stpmic1_regulator_cfgs[] = {
[STPMIC1_BUCK1] = {
.desc = REG_BUCK(BUCK1, buck1),
.icc_reg = BUCKS_ICCTO_CR,
@ -411,23 +424,17 @@ struct stpmic1_regulator_cfg stpmic1_regulator_cfgs[] = {
.mask_reset_mask = BIT(6),
},
[STPMIC1_BOOST] = {
.desc = REG_SWITCH(BOOST, boost, BST_SW_CR,
BOOST_ENABLED,
BOOST_ENABLED),
.desc = REG_BOOST(BOOST, boost),
.icc_reg = BUCKS_ICCTO_CR,
.icc_mask = BIT(6),
},
[STPMIC1_VBUS_OTG] = {
.desc = REG_SWITCH(VBUS_OTG, pwr_sw1, BST_SW_CR,
USBSW_OTG_SWITCH_ENABLED,
USBSW_OTG_SWITCH_ENABLED),
.desc = REG_VBUS_OTG(VBUS_OTG, pwr_sw1),
.icc_reg = BUCKS_ICCTO_CR,
.icc_mask = BIT(4),
},
[STPMIC1_SW_OUT] = {
.desc = REG_SWITCH(SW_OUT, pwr_sw2, BST_SW_CR,
SWIN_SWOUT_ENABLED,
SWIN_SWOUT_ENABLED),
.desc = REG_SW_OUT(SW_OUT, pwr_sw2),
.icc_reg = BUCKS_ICCTO_CR,
.icc_mask = BIT(5),
},
@ -448,8 +455,9 @@ static unsigned int stpmic1_map_mode(unsigned int mode)
static unsigned int stpmic1_get_mode(struct regulator_dev *rdev)
{
int value;
struct regmap *regmap = rdev_get_regmap(rdev);
regmap_read(rdev->regmap, rdev->desc->enable_reg, &value);
regmap_read(regmap, rdev->desc->enable_reg, &value);
if (value & STPMIC1_BUCK_MODE_LP)
return REGULATOR_MODE_STANDBY;
@ -460,6 +468,7 @@ static unsigned int stpmic1_get_mode(struct regulator_dev *rdev)
static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
int value;
struct regmap *regmap = rdev_get_regmap(rdev);
switch (mode) {
case REGULATOR_MODE_NORMAL:
@ -472,17 +481,18 @@ static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode)
return -EINVAL;
}
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
return regmap_update_bits(regmap, rdev->desc->enable_reg,
STPMIC1_BUCK_MODE_LP, value);
}
static int stpmic1_set_icc(struct regulator_dev *rdev)
{
struct stpmic1_regulator *regul = rdev_get_drvdata(rdev);
struct stpmic1_regulator_cfg *cfg = rdev_get_drvdata(rdev);
struct regmap *regmap = rdev_get_regmap(rdev);
/* enable switch off in case of over current */
return regmap_update_bits(regul->regmap, regul->cfg->icc_reg,
regul->cfg->icc_mask, regul->cfg->icc_mask);
return regmap_update_bits(regmap, cfg->icc_reg, cfg->icc_mask,
cfg->icc_mask);
}
static irqreturn_t stpmic1_curlim_irq_handler(int irq, void *data)
@ -501,46 +511,13 @@ static irqreturn_t stpmic1_curlim_irq_handler(int irq, void *data)
return IRQ_HANDLED;
}
static int stpmic1_regulator_init(struct platform_device *pdev,
struct regulator_dev *rdev)
{
struct stpmic1_regulator *regul = rdev_get_drvdata(rdev);
int ret = 0;
/* set mask reset */
if (regul->mask_reset && regul->cfg->mask_reset_reg != 0) {
ret = regmap_update_bits(regul->regmap,
regul->cfg->mask_reset_reg,
regul->cfg->mask_reset_mask,
regul->cfg->mask_reset_mask);
if (ret) {
dev_err(&pdev->dev, "set mask reset failed\n");
return ret;
}
}
/* setup an irq handler for over-current detection */
if (regul->irq_curlim > 0) {
ret = devm_request_threaded_irq(&pdev->dev,
regul->irq_curlim, NULL,
stpmic1_curlim_irq_handler,
IRQF_ONESHOT | IRQF_SHARED,
pdev->name, rdev);
if (ret) {
dev_err(&pdev->dev, "Request IRQ failed\n");
return ret;
}
}
return 0;
}
#define MATCH(_name, _id) \
[STPMIC1_##_id] = { \
.name = #_name, \
.desc = &stpmic1_regulator_cfgs[STPMIC1_##_id].desc, \
}
static struct of_regulator_match stpmic1_regulators_matches[] = {
static struct of_regulator_match stpmic1_matches[] = {
MATCH(buck1, BUCK1),
MATCH(buck2, BUCK2),
MATCH(buck3, BUCK3),
@ -557,94 +534,75 @@ static struct of_regulator_match stpmic1_regulators_matches[] = {
MATCH(pwr_sw2, SW_OUT),
};
static int stpmic1_regulator_parse_dt(void *driver_data)
{
struct stpmic1_regulator *regul =
(struct stpmic1_regulator *)driver_data;
if (!regul)
return -EINVAL;
if (of_get_property(regul->reg_node, "st,mask-reset", NULL))
regul->mask_reset = 1;
regul->irq_curlim = of_irq_get(regul->reg_node, 0);
return 0;
}
static struct
regulator_dev *stpmic1_regulator_register(struct platform_device *pdev, int id,
struct regulator_init_data *init_data,
struct stpmic1_regulator *regul)
static int stpmic1_regulator_register(struct platform_device *pdev, int id,
struct of_regulator_match *match,
const struct stpmic1_regulator_cfg *cfg)
{
struct stpmic1 *pmic_dev = dev_get_drvdata(pdev->dev.parent);
struct regulator_dev *rdev;
struct regulator_config config = {};
int ret = 0;
int irq;
config.dev = &pdev->dev;
config.init_data = init_data;
config.of_node = stpmic1_regulators_matches[id].of_node;
config.init_data = match->init_data;
config.of_node = match->of_node;
config.regmap = pmic_dev->regmap;
config.driver_data = regul;
config.driver_data = (void *)cfg;
regul->regul_id = id;
regul->reg_node = config.of_node;
regul->cfg = &stpmic1_regulator_cfgs[id];
regul->regmap = pmic_dev->regmap;
rdev = devm_regulator_register(&pdev->dev, &regul->cfg->desc, &config);
rdev = devm_regulator_register(&pdev->dev, &cfg->desc, &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "failed to register %s regulator\n",
regul->cfg->desc.name);
cfg->desc.name);
return PTR_ERR(rdev);
}
return rdev;
/* set mask reset */
if (of_get_property(config.of_node, "st,mask-reset", NULL) &&
cfg->mask_reset_reg != 0) {
ret = regmap_update_bits(pmic_dev->regmap,
cfg->mask_reset_reg,
cfg->mask_reset_mask,
cfg->mask_reset_mask);
if (ret) {
dev_err(&pdev->dev, "set mask reset failed\n");
return ret;
}
}
/* setup an irq handler for over-current detection */
irq = of_irq_get(config.of_node, 0);
if (irq > 0) {
ret = devm_request_threaded_irq(&pdev->dev,
irq, NULL,
stpmic1_curlim_irq_handler,
IRQF_ONESHOT | IRQF_SHARED,
pdev->name, rdev);
if (ret) {
dev_err(&pdev->dev, "Request IRQ failed\n");
return ret;
}
}
return 0;
}
static int stpmic1_regulator_probe(struct platform_device *pdev)
{
struct regulator_dev *rdev;
struct stpmic1_regulator *regul;
struct regulator_init_data *init_data;
struct device_node *np;
int i, ret;
np = pdev->dev.of_node;
ret = of_regulator_match(&pdev->dev, np,
stpmic1_regulators_matches,
ARRAY_SIZE(stpmic1_regulators_matches));
ret = of_regulator_match(&pdev->dev, pdev->dev.of_node, stpmic1_matches,
ARRAY_SIZE(stpmic1_matches));
if (ret < 0) {
dev_err(&pdev->dev,
"Error in PMIC regulator device tree node");
return ret;
}
regul = devm_kzalloc(&pdev->dev, ARRAY_SIZE(stpmic1_regulator_cfgs) *
sizeof(struct stpmic1_regulator),
GFP_KERNEL);
if (!regul)
return -ENOMEM;
for (i = 0; i < ARRAY_SIZE(stpmic1_regulator_cfgs); i++) {
/* Parse DT & find regulators to register */
init_data = stpmic1_regulators_matches[i].init_data;
if (init_data)
init_data->regulator_init = &stpmic1_regulator_parse_dt;
rdev = stpmic1_regulator_register(pdev, i, init_data, regul);
if (IS_ERR(rdev))
return PTR_ERR(rdev);
ret = stpmic1_regulator_init(pdev, rdev);
if (ret) {
dev_err(&pdev->dev,
"failed to initialize regulator %d\n", ret);
ret = stpmic1_regulator_register(pdev, i, &stpmic1_matches[i],
&stpmic1_regulator_cfgs[i]);
if (ret < 0)
return ret;
}
regul++;
}
dev_dbg(&pdev->dev, "stpmic1_regulator driver probed\n");

23
drivers/regulator/tps65218-regulator.c
View File

@ -188,7 +188,8 @@ static struct regulator_ops tps65218_ldo1_dcdc34_ops = {
.set_suspend_disable = tps65218_pmic_set_suspend_disable,
};
static const int ls3_currents[] = { 100, 200, 500, 1000 };
static const int ls3_currents[] = { 100000, 200000, 500000, 1000000 };
static int tps65218_pmic_set_input_current_lim(struct regulator_dev *dev,
int lim_uA)
@ -204,7 +205,8 @@ static int tps65218_pmic_set_input_current_lim(struct regulator_dev *dev,
return -EINVAL;
return tps65218_set_bits(tps, dev->desc->csel_reg, dev->desc->csel_mask,
index << 2, TPS65218_PROTECT_L1);
index << __builtin_ctz(dev->desc->csel_mask),
TPS65218_PROTECT_L1);
}
static int tps65218_pmic_set_current_limit(struct regulator_dev *dev,
@ -214,7 +216,7 @@ static int tps65218_pmic_set_current_limit(struct regulator_dev *dev,
unsigned int num_currents = ARRAY_SIZE(ls3_currents);
struct tps65218 *tps = rdev_get_drvdata(dev);
while (index < num_currents && ls3_currents[index] < max_uA)
while (index < num_currents && ls3_currents[index] <= max_uA)
index++;
index--;
@ -223,7 +225,8 @@ static int tps65218_pmic_set_current_limit(struct regulator_dev *dev,
return -EINVAL;
return tps65218_set_bits(tps, dev->desc->csel_reg, dev->desc->csel_mask,
index << 2, TPS65218_PROTECT_L1);
index << __builtin_ctz(dev->desc->csel_mask),
TPS65218_PROTECT_L1);
}
static int tps65218_pmic_get_current_limit(struct regulator_dev *dev)
@ -236,12 +239,13 @@ static int tps65218_pmic_get_current_limit(struct regulator_dev *dev)
if (retval < 0)
return retval;
index = (index & dev->desc->csel_mask) >> 2;
index = (index & dev->desc->csel_mask) >>
__builtin_ctz(dev->desc->csel_mask);
return ls3_currents[index];
}
static struct regulator_ops tps65218_ls3_ops = {
static struct regulator_ops tps65218_ls23_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = tps65218_pmic_enable,
.disable = tps65218_pmic_disable,
@ -303,8 +307,13 @@ static const struct regulator_desc regulators[] = {
TPS65218_ENABLE2_LDO1_EN, 0, 0, ldo1_dcdc3_ranges,
2, 0, 0, TPS65218_REG_SEQ6,
TPS65218_SEQ6_LDO1_SEQ_MASK),
TPS65218_REGULATOR("LS2", "regulator-ls2", TPS65218_LS_2,
REGULATOR_CURRENT, tps65218_ls23_ops, 0, 0, 0,
TPS65218_REG_ENABLE2, TPS65218_ENABLE2_LS2_EN,
TPS65218_REG_CONFIG2, TPS65218_CONFIG2_LS2ILIM_MASK,
NULL, 0, 0, 0, 0, 0),
TPS65218_REGULATOR("LS3", "regulator-ls3", TPS65218_LS_3,
REGULATOR_CURRENT, tps65218_ls3_ops, 0, 0, 0,
REGULATOR_CURRENT, tps65218_ls23_ops, 0, 0, 0,
TPS65218_REG_ENABLE2, TPS65218_ENABLE2_LS3_EN,
TPS65218_REG_CONFIG2, TPS65218_CONFIG2_LS3ILIM_MASK,
NULL, 0, 0, 0, 0, 0),

7
drivers/regulator/twl-regulator.c
View File

@ -576,14 +576,9 @@ static int twlreg_probe(struct platform_device *pdev)
struct regulator_init_data *initdata;
struct regulation_constraints *c;
struct regulator_dev *rdev;
const struct of_device_id *match;
struct regulator_config config = { };
match = of_match_device(twl_of_match, &pdev->dev);
if (!match)
return -ENODEV;
template = match->data;
template = of_device_get_match_data(&pdev->dev);
if (!template)
return -ENODEV;

88
drivers/regulator/twl6030-regulator.c
View File

@ -31,9 +31,6 @@ struct twlreg_info {
/* twl resource ID, for resource control state machine */
u8 id;
/* chip constraints on regulator behavior */
u16 min_mV;
u8 flags;
/* used by regulator core */
@ -247,32 +244,11 @@ static int twl6030coresmps_get_voltage(struct regulator_dev *rdev)
return -ENODEV;
}
static struct regulator_ops twl6030coresmps_ops = {
static const struct regulator_ops twl6030coresmps_ops = {
.set_voltage = twl6030coresmps_set_voltage,
.get_voltage = twl6030coresmps_get_voltage,
};
static int twl6030ldo_list_voltage(struct regulator_dev *rdev, unsigned sel)
{
struct twlreg_info *info = rdev_get_drvdata(rdev);
switch (sel) {
case 0:
return 0;
case 1 ... 24:
/* Linear mapping from 00000001 to 00011000:
* Absolute voltage value = 1.0 V + 0.1 V × (sel – 00000001)
*/
return (info->min_mV + 100 * (sel - 1)) * 1000;
case 25 ... 30:
return -EINVAL;
case 31:
return 2750000;
default:
return -EINVAL;
}
}
static int
twl6030ldo_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
{
@ -290,8 +266,8 @@ static int twl6030ldo_get_voltage_sel(struct regulator_dev *rdev)
return vsel;
}
static struct regulator_ops twl6030ldo_ops = {
.list_voltage = twl6030ldo_list_voltage,
static const struct regulator_ops twl6030ldo_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.set_voltage_sel = twl6030ldo_set_voltage_sel,
.get_voltage_sel = twl6030ldo_get_voltage_sel,
@ -305,7 +281,7 @@ static struct regulator_ops twl6030ldo_ops = {
.get_status = twl6030reg_get_status,
};
static struct regulator_ops twl6030fixed_ops = {
static const struct regulator_ops twl6030fixed_ops = {
.list_voltage = regulator_list_voltage_linear,
.enable = twl6030reg_enable,
@ -496,7 +472,7 @@ static int twl6030smps_get_voltage_sel(struct regulator_dev *rdev)
return twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS);
}
static struct regulator_ops twlsmps_ops = {
static const struct regulator_ops twlsmps_ops = {
.list_voltage = twl6030smps_list_voltage,
.map_voltage = twl6030smps_map_voltage,
@ -513,6 +489,11 @@ static struct regulator_ops twlsmps_ops = {
};
/*----------------------------------------------------------------------*/
static const struct regulator_linear_range twl6030ldo_linear_range[] = {
REGULATOR_LINEAR_RANGE(0, 0, 0, 0),
REGULATOR_LINEAR_RANGE(1000000, 1, 24, 100000),
REGULATOR_LINEAR_RANGE(2750000, 31, 31, 0),
};
#define TWL6030_ADJUSTABLE_SMPS(label) \
static const struct twlreg_info TWL6030_INFO_##label = { \
@ -525,28 +506,30 @@ static const struct twlreg_info TWL6030_INFO_##label = { \
}, \
}
#define TWL6030_ADJUSTABLE_LDO(label, offset, min_mVolts) \
#define TWL6030_ADJUSTABLE_LDO(label, offset) \
static const struct twlreg_info TWL6030_INFO_##label = { \
.base = offset, \
.min_mV = min_mVolts, \
.desc = { \
.name = #label, \
.id = TWL6030_REG_##label, \
.n_voltages = 32, \
.linear_ranges = twl6030ldo_linear_range, \
.n_linear_ranges = ARRAY_SIZE(twl6030ldo_linear_range), \
.ops = &twl6030ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
}, \
}
#define TWL6032_ADJUSTABLE_LDO(label, offset, min_mVolts) \
#define TWL6032_ADJUSTABLE_LDO(label, offset) \
static const struct twlreg_info TWL6032_INFO_##label = { \
.base = offset, \
.min_mV = min_mVolts, \
.desc = { \
.name = #label, \
.id = TWL6032_REG_##label, \
.n_voltages = 32, \
.linear_ranges = twl6030ldo_linear_range, \
.n_linear_ranges = ARRAY_SIZE(twl6030ldo_linear_range), \
.ops = &twl6030ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
@ -557,7 +540,6 @@ static const struct twlreg_info TWL6032_INFO_##label = { \
static const struct twlreg_info TWLFIXED_INFO_##label = { \
.base = offset, \
.id = 0, \
.min_mV = mVolts, \
.desc = { \
.name = #label, \
.id = TWL6030##_REG_##label, \
@ -574,7 +556,6 @@ static const struct twlreg_info TWLFIXED_INFO_##label = { \
#define TWL6032_ADJUSTABLE_SMPS(label, offset) \
static const struct twlreg_info TWLSMPS_INFO_##label = { \
.base = offset, \
.min_mV = 600, \
.desc = { \
.name = #label, \
.id = TWL6032_REG_##label, \
@ -592,22 +573,22 @@ static const struct twlreg_info TWLSMPS_INFO_##label = { \
TWL6030_ADJUSTABLE_SMPS(VDD1);
TWL6030_ADJUSTABLE_SMPS(VDD2);
TWL6030_ADJUSTABLE_SMPS(VDD3);
TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1000);
TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 1000);
TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 1000);
TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 1000);
TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 1000);
TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 1000);
TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54);
TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58);
TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c);
TWL6030_ADJUSTABLE_LDO(VMMC, 0x68);
TWL6030_ADJUSTABLE_LDO(VPP, 0x6c);
TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74);
/* 6025 are renamed compared to 6030 versions */
TWL6032_ADJUSTABLE_LDO(LDO2, 0x54, 1000);
TWL6032_ADJUSTABLE_LDO(LDO4, 0x58, 1000);
TWL6032_ADJUSTABLE_LDO(LDO3, 0x5c, 1000);
TWL6032_ADJUSTABLE_LDO(LDO5, 0x68, 1000);
TWL6032_ADJUSTABLE_LDO(LDO1, 0x6c, 1000);
TWL6032_ADJUSTABLE_LDO(LDO7, 0x74, 1000);
TWL6032_ADJUSTABLE_LDO(LDO6, 0x60, 1000);
TWL6032_ADJUSTABLE_LDO(LDOLN, 0x64, 1000);
TWL6032_ADJUSTABLE_LDO(LDOUSB, 0x70, 1000);
TWL6032_ADJUSTABLE_LDO(LDO2, 0x54);
TWL6032_ADJUSTABLE_LDO(LDO4, 0x58);
TWL6032_ADJUSTABLE_LDO(LDO3, 0x5c);
TWL6032_ADJUSTABLE_LDO(LDO5, 0x68);
TWL6032_ADJUSTABLE_LDO(LDO1, 0x6c);
TWL6032_ADJUSTABLE_LDO(LDO7, 0x74);
TWL6032_ADJUSTABLE_LDO(LDO6, 0x60);
TWL6032_ADJUSTABLE_LDO(LDOLN, 0x64);
TWL6032_ADJUSTABLE_LDO(LDOUSB, 0x70);
TWL6030_FIXED_LDO(VANA, 0x50, 2100, 0);
TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 0);
TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 0);
@ -687,14 +668,9 @@ static int twlreg_probe(struct platform_device *pdev)
struct regulator_init_data *initdata;
struct regulation_constraints *c;
struct regulator_dev *rdev;
const struct of_device_id *match;
struct regulator_config config = { };
match = of_match_device(twl_of_match, &pdev->dev);
if (!match)
return -ENODEV;
template = match->data;
template = of_device_get_match_data(&pdev->dev);
if (!template)
return -ENODEV;

8
drivers/regulator/uniphier-regulator.c
View File

@ -32,7 +32,7 @@ struct uniphier_regulator_priv {
const struct uniphier_regulator_soc_data *data;
};
static struct regulator_ops uniphier_regulator_ops = {
static const struct regulator_ops uniphier_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@ -87,8 +87,10 @@ static int uniphier_regulator_probe(struct platform_device *pdev)
}
regmap = devm_regmap_init_mmio(dev, base, priv->data->regconf);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
if (IS_ERR(regmap)) {
ret = PTR_ERR(regmap);
goto out_rst_assert;
}
config.dev = dev;
config.driver_data = priv;

85
drivers/regulator/wm831x-dcdc.c
View File

@ -205,33 +205,10 @@ static irqreturn_t wm831x_dcdc_oc_irq(int irq, void *data)
* BUCKV specifics
*/
static int wm831x_buckv_list_voltage(struct regulator_dev *rdev,
unsigned selector)
{
if (selector <= 0x8)
return 600000;
if (selector <= WM831X_BUCKV_MAX_SELECTOR)
return 600000 + ((selector - 0x8) * 12500);
return -EINVAL;
}
static int wm831x_buckv_map_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV)
{
u16 vsel;
if (min_uV < 600000)
vsel = 0;
else if (min_uV <= 1800000)
vsel = DIV_ROUND_UP(min_uV - 600000, 12500) + 8;
else
return -EINVAL;
if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV)
return -EINVAL;
return vsel;
}
static const struct regulator_linear_range wm831x_buckv_ranges[] = {
REGULATOR_LINEAR_RANGE(600000, 0, 0x7, 0),
REGULATOR_LINEAR_RANGE(600000, 0x8, 0x68, 12500),
};
static int wm831x_buckv_set_dvs(struct regulator_dev *rdev, int state)
{
@ -309,7 +286,7 @@ static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev,
u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
int vsel;
vsel = wm831x_buckv_map_voltage(rdev, uV, uV);
vsel = regulator_map_voltage_linear_range(rdev, uV, uV);
if (vsel < 0)
return vsel;
@ -327,52 +304,18 @@ static int wm831x_buckv_get_voltage_sel(struct regulator_dev *rdev)
}
/* Current limit options */
static u16 wm831x_dcdc_ilim[] = {
125, 250, 375, 500, 625, 750, 875, 1000
static const unsigned int wm831x_dcdc_ilim[] = {
125000, 250000, 375000, 500000, 625000, 750000, 875000, 1000000
};
static int wm831x_buckv_set_current_limit(struct regulator_dev *rdev,
int min_uA, int max_uA)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
struct wm831x *wm831x = dcdc->wm831x;
u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2;
int i;
for (i = ARRAY_SIZE(wm831x_dcdc_ilim) - 1; i >= 0; i--) {
if ((min_uA <= wm831x_dcdc_ilim[i]) &&
(wm831x_dcdc_ilim[i] <= max_uA))
return wm831x_set_bits(wm831x, reg,
WM831X_DC1_HC_THR_MASK,
i << WM831X_DC1_HC_THR_SHIFT);
}
return -EINVAL;
}
static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
struct wm831x *wm831x = dcdc->wm831x;
u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2;
int val;
val = wm831x_reg_read(wm831x, reg);
if (val < 0)
return val;
val = (val & WM831X_DC1_HC_THR_MASK) >> WM831X_DC1_HC_THR_SHIFT;
return wm831x_dcdc_ilim[val];
}
static const struct regulator_ops wm831x_buckv_ops = {
.set_voltage_sel = wm831x_buckv_set_voltage_sel,
.get_voltage_sel = wm831x_buckv_get_voltage_sel,
.list_voltage = wm831x_buckv_list_voltage,
.map_voltage = wm831x_buckv_map_voltage,
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.set_suspend_voltage = wm831x_buckv_set_suspend_voltage,
.set_current_limit = wm831x_buckv_set_current_limit,
.get_current_limit = wm831x_buckv_get_current_limit,
.set_current_limit = regulator_set_current_limit_regmap,
.get_current_limit = regulator_get_current_limit_regmap,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
@ -492,10 +435,16 @@ static int wm831x_buckv_probe(struct platform_device *pdev)
dcdc->desc.id = id;
dcdc->desc.type = REGULATOR_VOLTAGE;
dcdc->desc.n_voltages = WM831X_BUCKV_MAX_SELECTOR + 1;
dcdc->desc.linear_ranges = wm831x_buckv_ranges;
dcdc->desc.n_linear_ranges = ARRAY_SIZE(wm831x_buckv_ranges);
dcdc->desc.ops = &wm831x_buckv_ops;
dcdc->desc.owner = THIS_MODULE;
dcdc->desc.enable_reg = WM831X_DCDC_ENABLE;
dcdc->desc.enable_mask = 1 << id;
dcdc->desc.csel_reg = dcdc->base + WM831X_DCDC_CONTROL_2;
dcdc->desc.csel_mask = WM831X_DC1_HC_THR_MASK;
dcdc->desc.n_current_limits = ARRAY_SIZE(wm831x_dcdc_ilim);
dcdc->desc.curr_table = wm831x_dcdc_ilim;
ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG);
if (ret < 0) {

3
include/linux/mfd/tps65218.h
View File

@ -208,6 +208,7 @@ enum tps65218_regulator_id {
/* LDOs */
TPS65218_LDO_1,
/* LS's */
TPS65218_LS_2,
TPS65218_LS_3,
};
@ -218,7 +219,7 @@ enum tps65218_regulator_id {
/* Number of LDO voltage regulators available */
#define TPS65218_NUM_LDO 1
/* Number of total LS current regulators available */
#define TPS65218_NUM_LS 1
#define TPS65218_NUM_LS 2
/* Number of total regulators available */
#define TPS65218_NUM_REGULATOR (TPS65218_NUM_DCDC + TPS65218_NUM_LDO \
+ TPS65218_NUM_LS)

30
include/linux/regulator/driver.h
View File

@ -264,6 +264,7 @@ enum regulator_type {
* @continuous_voltage_range: Indicates if the regulator can set any
* voltage within constrains range.
* @n_voltages: Number of selectors available for ops.list_voltage().
* @n_current_limits: Number of selectors available for current limits
*
* @min_uV: Voltage given by the lowest selector (if linear mapping)
* @uV_step: Voltage increase with each selector (if linear mapping)
@ -278,14 +279,15 @@ enum regulator_type {
* @n_linear_ranges: Number of entries in the @linear_ranges (and in
* linear_range_selectors if used) table(s).
* @volt_table: Voltage mapping table (if table based mapping)
* @curr_table: Current limit mapping table (if table based mapping)
*
* @vsel_range_reg: Register for range selector when using pickable ranges
* and regulator_regmap_X_voltage_X_pickable functions.
* @vsel_range_mask: Mask for register bitfield used for range selector
* @vsel_reg: Register for selector when using regulator_regmap_X_voltage_
* @vsel_mask: Mask for register bitfield used for selector
* @csel_reg: Register for TPS65218 LS3 current regulator
* @csel_mask: Mask for TPS65218 LS3 current regulator
* @csel_reg: Register for current limit selector using regmap set_current_limit
* @csel_mask: Mask for register bitfield used for current limit selector
* @apply_reg: Register for initiate voltage change on the output when
* using regulator_set_voltage_sel_regmap
* @apply_bit: Register bitfield used for initiate voltage change on the
@ -333,6 +335,7 @@ struct regulator_desc {
int id;
unsigned int continuous_voltage_range:1;
unsigned n_voltages;
unsigned int n_current_limits;
const struct regulator_ops *ops;
int irq;
enum regulator_type type;
@ -351,6 +354,7 @@ struct regulator_desc {
int n_linear_ranges;
const unsigned int *volt_table;
const unsigned int *curr_table;
unsigned int vsel_range_reg;
unsigned int vsel_range_mask;
@ -401,13 +405,7 @@ struct regulator_desc {
* NULL).
* @regmap: regmap to use for core regmap helpers if dev_get_regmap() is
* insufficient.
* @ena_gpio_initialized: GPIO controlling regulator enable was properly
* initialized, meaning that >= 0 is a valid gpio
* identifier and < 0 is a non existent gpio.
* @ena_gpio: GPIO controlling regulator enable.
* @ena_gpiod: GPIO descriptor controlling regulator enable.
* @ena_gpio_invert: Sense for GPIO enable control.
* @ena_gpio_flags: Flags to use when calling gpio_request_one()
* @ena_gpiod: GPIO controlling regulator enable.
*/
struct regulator_config {
struct device *dev;
@ -416,11 +414,7 @@ struct regulator_config {
struct device_node *of_node;
struct regmap *regmap;
bool ena_gpio_initialized;
int ena_gpio;
struct gpio_desc *ena_gpiod;
unsigned int ena_gpio_invert:1;
unsigned int ena_gpio_flags;
};
/*
@ -503,6 +497,7 @@ int regulator_notifier_call_chain(struct regulator_dev *rdev,
void *rdev_get_drvdata(struct regulator_dev *rdev);
struct device *rdev_get_dev(struct regulator_dev *rdev);
struct regmap *rdev_get_regmap(struct regulator_dev *rdev);
int rdev_get_id(struct regulator_dev *rdev);
int regulator_mode_to_status(unsigned int);
@ -543,9 +538,18 @@ int regulator_set_pull_down_regmap(struct regulator_dev *rdev);
int regulator_set_active_discharge_regmap(struct regulator_dev *rdev,
bool enable);
int regulator_set_current_limit_regmap(struct regulator_dev *rdev,
int min_uA, int max_uA);
int regulator_get_current_limit_regmap(struct regulator_dev *rdev);
void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
void regulator_lock(struct regulator_dev *rdev);
void regulator_unlock(struct regulator_dev *rdev);
/*
* Helper functions intended to be used by regulator drivers prior registering
* their regulators.
*/
int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc,
unsigned int selector);
#endif

10
include/linux/regulator/fixed.h
View File

@ -25,14 +25,6 @@ struct regulator_init_data;
* @input_supply: Name of the input regulator supply
* @microvolts: Output voltage of regulator
* @startup_delay: Start-up time in microseconds
* @gpio_is_open_drain: Gpio pin is open drain or normal type.
* If it is open drain type then HIGH will be set
* through PULL-UP with setting gpio as input
* and low will be set as gpio-output with driven
* to low. For non-open-drain case, the gpio will
* will be in output and drive to low/high accordingly.
* @enable_high: Polarity of enable GPIO
* 1 = Active high, 0 = Active low
* @enabled_at_boot: Whether regulator has been enabled at
* boot or not. 1 = Yes, 0 = No
* This is used to keep the regulator at
@ -48,8 +40,6 @@ struct fixed_voltage_config {
const char *input_supply;
int microvolts;
unsigned startup_delay;
unsigned gpio_is_open_drain:1;
unsigned enable_high:1;
unsigned enabled_at_boot:1;
struct regulator_init_data *init_data;
};

18
include/linux/regulator/gpio-regulator.h
View File

@ -21,6 +21,8 @@
#ifndef __REGULATOR_GPIO_H
#define __REGULATOR_GPIO_H
#include <linux/gpio/consumer.h>
struct regulator_init_data;
enum regulator_type;
@ -44,18 +46,14 @@ struct gpio_regulator_state {
/**
* struct gpio_regulator_config - config structure
* @supply_name: Name of the regulator supply
* @enable_gpio: GPIO to use for enable control
* set to -EINVAL if not used
* @enable_high: Polarity of enable GPIO
* 1 = Active high, 0 = Active low
* @enabled_at_boot: Whether regulator has been enabled at
* boot or not. 1 = Yes, 0 = No
* This is used to keep the regulator at
* the default state
* @startup_delay: Start-up time in microseconds
* @gpios: Array containing the gpios needed to control
* the setting of the regulator
* @nr_gpios: Number of gpios
* @gflags: Array of GPIO configuration flags for initial
* states
* @ngpios: Number of GPIOs and configurations available
* @states: Array of gpio_regulator_state entries describing
* the gpio state for specific voltages
* @nr_states: Number of states available
@ -69,13 +67,11 @@ struct gpio_regulator_state {
struct gpio_regulator_config {
const char *supply_name;
int enable_gpio;
unsigned enable_high:1;
unsigned enabled_at_boot:1;
unsigned startup_delay;
struct gpio *gpios;
int nr_gpios;
enum gpiod_flags *gflags;
int ngpios;
struct gpio_regulator_state *states;
int nr_states;