From 33d8e6a5f555b0d61cb3cb0e3c28e611c7408f4e Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 26 Dec 2013 09:57:08 +0200 Subject: [PATCH] bnx2x: Add AER support (missing bits) This function adds several OS calls required to fully enable PCIe AER support - pci_enable_pcie_error_reporting() and pci_cleanup_aer_uncorrect_error_status(). Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 1 + .../net/ethernet/broadcom/bnx2x/bnx2x_main.c | 29 +++++++++++++++++++ 2 files changed, 30 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 52019a90cd15..dad67905f4e2 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1546,6 +1546,7 @@ struct bnx2x { #define INTERRUPTS_ENABLED_FLAG (1 << 23) #define BC_SUPPORTS_RMMOD_CMD (1 << 24) #define HAS_PHYS_PORT_ID (1 << 25) +#define AER_ENABLED (1 << 26) #define BP_NOMCP(bp) ((bp)->flags & NO_MCP_FLAG) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 591041379b27..72973cc7ecbe 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -12225,6 +12226,14 @@ static int bnx2x_set_coherency_mask(struct bnx2x *bp) return 0; } +static void bnx2x_disable_pcie_error_reporting(struct bnx2x *bp) +{ + if (bp->flags & AER_ENABLED) { + pci_disable_pcie_error_reporting(bp->pdev); + bp->flags &= ~AER_ENABLED; + } +} + static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev, struct net_device *dev, unsigned long board_type) { @@ -12331,6 +12340,14 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev, /* clean indirect addresses */ pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, PCICFG_VENDOR_ID_OFFSET); + + /* AER (Advanced Error reporting) configuration */ + rc = pci_enable_pcie_error_reporting(pdev); + if (!rc) + bp->flags |= AER_ENABLED; + else + BNX2X_DEV_INFO("Failed To configure PCIe AER [%d]\n", rc); + /* * Clean the following indirect addresses for all functions since it * is not used by the driver. @@ -12938,6 +12955,8 @@ static int bnx2x_init_one(struct pci_dev *pdev, return 0; init_one_exit: + bnx2x_disable_pcie_error_reporting(bp); + if (bp->regview) iounmap(bp->regview); @@ -13011,6 +13030,8 @@ static void __bnx2x_remove(struct pci_dev *pdev, pci_set_power_state(pdev, PCI_D3hot); } + bnx2x_disable_pcie_error_reporting(bp); + if (bp->regview) iounmap(bp->regview); @@ -13188,6 +13209,14 @@ static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev) rtnl_unlock(); + /* If AER, perform cleanup of the PCIe registers */ + if (bp->flags & AER_ENABLED) { + if (pci_cleanup_aer_uncorrect_error_status(pdev)) + BNX2X_ERR("pci_cleanup_aer_uncorrect_error_status failed\n"); + else + DP(NETIF_MSG_HW, "pci_cleanup_aer_uncorrect_error_status succeeded\n"); + } + return PCI_ERS_RESULT_RECOVERED; }