openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

dt-bindings: rtc: sun6i-rtc: Add compatible strings for pre-H6 variants 

While doing Bluetooth enablement for various boards based on various
Allwinner SoCs, minor differences in the RTC modules were found. These
include a lack of an external clock output (A31), different internal
oscillator frequencies (H3/H5/A64/V3/V3s), different regulator voltage
settings (H5/H6), and the presence of miscellaneous registers unrelated
to the RTC (A64/R40/H5/H6). The datasheet also describes different number
of registers for non-volatile storage, though based on actual experiments
the actual number is the same across the board.

This patch adds a list of all pre-H6 variants, grouped by the internal
oscillator's clock rate, regulator settings, and the presence of the
external clock output. Combinations are introduced for the variants that
have miscellaneous registers.

The RTC block in the H6 also handles the 24 MHz DCXO. This will require
more device tree binding changes and will be done later.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This commit is contained in:
Chen-Yu Tsai 2018-12-03 22:58:13 +08:00 committed by Alexandre Belloni
parent 9ca22651e1
commit 347d357030
1 changed files with 15 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
Documentation/devicetree/bindings/rtc/sun6i-rtc.txt
View File

@ -3,7 +3,21 @@
RTC controller for the Allwinner A31
Required properties:
- compatible : Should be "allwinner,sun6i-a31-rtc"
- compatible : Should be one of the following combinations:
- "allwinner,sun6i-a31-rtc"
- "allwinner,sun8i-a23-rtc"
- "allwinner,sun8i-h3-rtc"
- "allwinner,sun8i-r40-rtc", "allwinner,sun8i-h3-rtc"
- "allwinner,sun8i-v3-rtc"
- "allwinner,sun50i-a64-rtc", "allwinner,sun8i-h3-rtc"
- "allwinner,sun50i-h5-rtc"
Where there are two or more compatible strings, this
denotes the hardware covered by the most specific one
is backward-compatible with the latter ones, and the
implementation for the latter ones can be used, albeit
with reduced functionality.
- reg : physical base address of the controller and length of
memory mapped region.
- interrupts : IRQ lines for the RTC alarm 0 and alarm 1, in that order.