From 36886be7dd3b48f593d9da21c631d06d5bfae55d Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Wed, 3 Feb 2016 20:02:22 +0100 Subject: [PATCH] mtd: nand: jz4780: switch to mtd_ooblayout_ops Implementing the mtd_ooblayout_ops interface is the new way of exposing ECC/OOB layout to MTD users. Signed-off-by: Boris Brezillon Tested-by: Harvey Hunt --- drivers/mtd/nand/jz4780_nand.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) diff --git a/drivers/mtd/nand/jz4780_nand.c b/drivers/mtd/nand/jz4780_nand.c index 23a1999ae839..10f249ac148c 100644 --- a/drivers/mtd/nand/jz4780_nand.c +++ b/drivers/mtd/nand/jz4780_nand.c @@ -55,8 +55,6 @@ struct jz4780_nand_chip { struct nand_chip chip; struct list_head chip_list; - struct nand_ecclayout ecclayout; - struct gpio_desc *busy_gpio; struct gpio_desc *wp_gpio; unsigned int reading: 1; @@ -164,8 +162,7 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de struct nand_chip *chip = &nand->chip; struct mtd_info *mtd = nand_to_mtd(chip); struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(chip->controller); - struct nand_ecclayout *layout = &nand->ecclayout; - u32 start, i; + int eccbytes; chip->ecc.bytes = fls((1 + 8) * chip->ecc.size) * (chip->ecc.strength / 8); @@ -200,23 +197,17 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de return 0; /* Generate ECC layout. ECC codes are right aligned in the OOB area. */ - layout->eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes; + eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes; - if (layout->eccbytes > mtd->oobsize - 2) { + if (eccbytes > mtd->oobsize - 2) { dev_err(dev, "invalid ECC config: required %d ECC bytes, but only %d are available", - layout->eccbytes, mtd->oobsize - 2); + eccbytes, mtd->oobsize - 2); return -EINVAL; } - start = mtd->oobsize - layout->eccbytes; - for (i = 0; i < layout->eccbytes; i++) - layout->eccpos[i] = start + i; + mtd->ooblayout = &nand_ooblayout_lp_ops; - layout->oobfree[0].offset = 2; - layout->oobfree[0].length = mtd->oobsize - layout->eccbytes - 2; - - chip->ecc.layout = layout; return 0; }