mirror of https://gitee.com/openkylin/linux.git
gpio/omap: Add DT support to GPIO driver
Adapt the GPIO driver to retrieve information from a DT file. Allocate the irq_base dynamically and rename bank->virtual_irq_start to bank->irq_base. Change irq_base type to int instead of u16 to match irq_alloc_descs output. Add documentation for GPIO properties specific to OMAP. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com>
This commit is contained in:
Benoit Cousson
parent
96751fcbe5
commit
384ebe1c28
|
|
@ -0,0 +1,36 @@
|
|||
OMAP GPIO controller bindings
|
||||
|
||||
Required properties:
|
||||
- compatible:
|
||||
- "ti,omap2-gpio" for OMAP2 controllers
|
||||
- "ti,omap3-gpio" for OMAP3 controllers
|
||||
- "ti,omap4-gpio" for OMAP4 controllers
|
||||
- #gpio-cells : Should be two.
|
||||
- first cell is the pin number
|
||||
- second cell is used to specify optional parameters (unused)
|
||||
- gpio-controller : Marks the device node as a GPIO controller.
|
||||
- #interrupt-cells : Should be 2.
|
||||
- interrupt-controller: Mark the device node as an interrupt controller
|
||||
The first cell is the GPIO number.
|
||||
The second cell is used to specify flags:
|
||||
bits[3:0] trigger type and level flags:
|
||||
1 = low-to-high edge triggered.
|
||||
2 = high-to-low edge triggered.
|
||||
4 = active high level-sensitive.
|
||||
8 = active low level-sensitive.
|
||||
|
||||
OMAP specific properties:
|
||||
- ti,hwmods: Name of the hwmod associated to the GPIO:
|
||||
"gpio<X>", <X> being the 1-based instance number from the HW spec
|
||||
|
||||
|
||||
Example:
|
||||
|
||||
gpio4: gpio4 {
|
||||
compatible = "ti,omap4-gpio";
|
||||
ti,hwmods = "gpio4";
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
};
|
||||
|
|
@ -22,6 +22,9 @@
|
|||
#include <linux/device.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
#include <linux/pm.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/irqdomain.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
#include <asm/irq.h>
|
||||
|
|
@ -52,7 +55,8 @@ struct gpio_bank {
|
|||
struct list_head node;
|
||||
void __iomem *base;
|
||||
u16 irq;
|
||||
u16 virtual_irq_start;
|
||||
int irq_base;
|
||||
struct irq_domain *domain;
|
||||
u32 suspend_wakeup;
|
||||
u32 saved_wakeup;
|
||||
u32 non_wakeup_gpios;
|
||||
|
|
@ -669,7 +673,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
|
|||
if (!isr)
|
||||
break;
|
||||
|
||||
gpio_irq = bank->virtual_irq_start;
|
||||
gpio_irq = bank->irq_base;
|
||||
for (; isr != 0; isr >>= 1, gpio_irq++) {
|
||||
gpio_index = GPIO_INDEX(bank, irq_to_gpio(gpio_irq));
|
||||
|
||||
|
|
@ -915,7 +919,7 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
|
|||
struct gpio_bank *bank;
|
||||
|
||||
bank = container_of(chip, struct gpio_bank, chip);
|
||||
return bank->virtual_irq_start + offset;
|
||||
return bank->irq_base + offset;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------*/
|
||||
|
|
@ -1028,8 +1032,7 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
|
|||
|
||||
gpiochip_add(&bank->chip);
|
||||
|
||||
for (j = bank->virtual_irq_start;
|
||||
j < bank->virtual_irq_start + bank->width; j++) {
|
||||
for (j = bank->irq_base; j < bank->irq_base + bank->width; j++) {
|
||||
irq_set_lockdep_class(j, &gpio_lock_class);
|
||||
irq_set_chip_data(j, bank);
|
||||
if (bank->is_mpuio) {
|
||||
|
|
@ -1044,15 +1047,22 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
|
|||
irq_set_handler_data(bank->irq, bank);
|
||||
}
|
||||
|
||||
static const struct of_device_id omap_gpio_match[];
|
||||
|
||||
static int __devinit omap_gpio_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct device_node *node = dev->of_node;
|
||||
const struct of_device_id *match;
|
||||
struct omap_gpio_platform_data *pdata;
|
||||
struct resource *res;
|
||||
struct gpio_bank *bank;
|
||||
int ret = 0;
|
||||
|
||||
if (!dev->platform_data)
|
||||
match = of_match_device(of_match_ptr(omap_gpio_match), dev);
|
||||
|
||||
pdata = match ? match->data : dev->platform_data;
|
||||
if (!pdata)
|
||||
return -EINVAL;
|
||||
|
||||
bank = devm_kzalloc(&pdev->dev, sizeof(struct gpio_bank), GFP_KERNEL);
|
||||
|
|
@ -1068,9 +1078,6 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
|
|||
}
|
||||
|
||||
bank->irq = res->start;
|
||||
|
||||
pdata = pdev->dev.platform_data;
|
||||
bank->virtual_irq_start = pdata->virtual_irq_start;
|
||||
bank->dev = dev;
|
||||
bank->dbck_flag = pdata->dbck_flag;
|
||||
bank->stride = pdata->bank_stride;
|
||||
|
|
@ -1080,6 +1087,18 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
|
|||
bank->loses_context = pdata->loses_context;
|
||||
bank->get_context_loss_count = pdata->get_context_loss_count;
|
||||
bank->regs = pdata->regs;
|
||||
#ifdef CONFIG_OF_GPIO
|
||||
bank->chip.of_node = of_node_get(node);
|
||||
#endif
|
||||
|
||||
bank->irq_base = irq_alloc_descs(-1, 0, bank->width, 0);
|
||||
if (bank->irq_base < 0) {
|
||||
dev_err(dev, "Couldn't allocate IRQ numbers\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
bank->domain = irq_domain_add_legacy(node, bank->width, bank->irq_base,
|
||||
0, &irq_domain_simple_ops, NULL);
|
||||
|
||||
if (bank->regs->set_dataout && bank->regs->clr_dataout)
|
||||
bank->set_dataout = _set_gpio_dataout_reg;
|
||||
|
|
@ -1387,11 +1406,95 @@ static const struct dev_pm_ops gpio_pm_ops = {
|
|||
NULL)
|
||||
};
|
||||
|
||||
#if defined(CONFIG_OF)
|
||||
static struct omap_gpio_reg_offs omap2_gpio_regs = {
|
||||
.revision = OMAP24XX_GPIO_REVISION,
|
||||
.direction = OMAP24XX_GPIO_OE,
|
||||
.datain = OMAP24XX_GPIO_DATAIN,
|
||||
.dataout = OMAP24XX_GPIO_DATAOUT,
|
||||
.set_dataout = OMAP24XX_GPIO_SETDATAOUT,
|
||||
.clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT,
|
||||
.irqstatus = OMAP24XX_GPIO_IRQSTATUS1,
|
||||
.irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2,
|
||||
.irqenable = OMAP24XX_GPIO_IRQENABLE1,
|
||||
.irqenable2 = OMAP24XX_GPIO_IRQENABLE2,
|
||||
.set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1,
|
||||
.clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1,
|
||||
.debounce = OMAP24XX_GPIO_DEBOUNCE_VAL,
|
||||
.debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN,
|
||||
.ctrl = OMAP24XX_GPIO_CTRL,
|
||||
.wkup_en = OMAP24XX_GPIO_WAKE_EN,
|
||||
.leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0,
|
||||
.leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1,
|
||||
.risingdetect = OMAP24XX_GPIO_RISINGDETECT,
|
||||
.fallingdetect = OMAP24XX_GPIO_FALLINGDETECT,
|
||||
};
|
||||
|
||||
static struct omap_gpio_reg_offs omap4_gpio_regs = {
|
||||
.revision = OMAP4_GPIO_REVISION,
|
||||
.direction = OMAP4_GPIO_OE,
|
||||
.datain = OMAP4_GPIO_DATAIN,
|
||||
.dataout = OMAP4_GPIO_DATAOUT,
|
||||
.set_dataout = OMAP4_GPIO_SETDATAOUT,
|
||||
.clr_dataout = OMAP4_GPIO_CLEARDATAOUT,
|
||||
.irqstatus = OMAP4_GPIO_IRQSTATUS0,
|
||||
.irqstatus2 = OMAP4_GPIO_IRQSTATUS1,
|
||||
.irqenable = OMAP4_GPIO_IRQSTATUSSET0,
|
||||
.irqenable2 = OMAP4_GPIO_IRQSTATUSSET1,
|
||||
.set_irqenable = OMAP4_GPIO_IRQSTATUSSET0,
|
||||
.clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0,
|
||||
.debounce = OMAP4_GPIO_DEBOUNCINGTIME,
|
||||
.debounce_en = OMAP4_GPIO_DEBOUNCENABLE,
|
||||
.ctrl = OMAP4_GPIO_CTRL,
|
||||
.wkup_en = OMAP4_GPIO_IRQWAKEN0,
|
||||
.leveldetect0 = OMAP4_GPIO_LEVELDETECT0,
|
||||
.leveldetect1 = OMAP4_GPIO_LEVELDETECT1,
|
||||
.risingdetect = OMAP4_GPIO_RISINGDETECT,
|
||||
.fallingdetect = OMAP4_GPIO_FALLINGDETECT,
|
||||
};
|
||||
|
||||
static struct omap_gpio_platform_data omap2_pdata = {
|
||||
.regs = &omap2_gpio_regs,
|
||||
.bank_width = 32,
|
||||
.dbck_flag = false,
|
||||
};
|
||||
|
||||
static struct omap_gpio_platform_data omap3_pdata = {
|
||||
.regs = &omap2_gpio_regs,
|
||||
.bank_width = 32,
|
||||
.dbck_flag = true,
|
||||
};
|
||||
|
||||
static struct omap_gpio_platform_data omap4_pdata = {
|
||||
.regs = &omap4_gpio_regs,
|
||||
.bank_width = 32,
|
||||
.dbck_flag = true,
|
||||
};
|
||||
|
||||
static const struct of_device_id omap_gpio_match[] = {
|
||||
{
|
||||
.compatible = "ti,omap4-gpio",
|
||||
.data = &omap4_pdata,
|
||||
},
|
||||
{
|
||||
.compatible = "ti,omap3-gpio",
|
||||
.data = &omap3_pdata,
|
||||
},
|
||||
{
|
||||
.compatible = "ti,omap2-gpio",
|
||||
.data = &omap2_pdata,
|
||||
},
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, omap_gpio_match);
|
||||
#endif
|
||||
|
||||
static struct platform_driver omap_gpio_driver = {
|
||||
.probe = omap_gpio_probe,
|
||||
.driver = {
|
||||
.name = "omap_gpio",
|
||||
.pm = &gpio_pm_ops,
|
||||
.of_match_table = of_match_ptr(omap_gpio_match),
|
||||
},
|
||||
};
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue