mirror of https://gitee.com/openkylin/linux.git
Merge tag 'arm-soc/for-5.3/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes for 5.3, please pull the following: - Pramod adds the Device Tree nodes for thermal support on Stingray - Srinath adds the Device Tree nodes for both XHCI (host) and BDC (device) modes - Rayagonda adds the Device Tree node for slave I2C operation when Stingray operates as a SmartNIC * tag 'arm-soc/for-5.3/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: Stingray: Add NIC i2c device node arm64: dts: Add USB DT nodes for Stingray SoC arm64: dts: stingray: Add Stingray Thermal DT support. Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson
commit
3aa45174e1
|
|
@ -0,0 +1,72 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
|
||||
/*
|
||||
*Copyright(c) 2018 Broadcom
|
||||
*/
|
||||
usb {
|
||||
compatible = "simple-bus";
|
||||
dma-ranges;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0x0 0x68500000 0x00400000>;
|
||||
|
||||
usbphy0: usb-phy@0 {
|
||||
compatible = "brcm,sr-usb-combo-phy";
|
||||
reg = <0x00000000 0x100>;
|
||||
#phy-cells = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
xhci0: usb@1000 {
|
||||
compatible = "generic-xhci";
|
||||
reg = <0x00001000 0x1000>;
|
||||
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phys = <&usbphy0 1>, <&usbphy0 0>;
|
||||
phy-names = "phy0", "phy1";
|
||||
dma-coherent;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
bdc0: usb@2000 {
|
||||
compatible = "brcm,bdc-v0.16";
|
||||
reg = <0x00002000 0x1000>;
|
||||
interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phys = <&usbphy0 0>, <&usbphy0 1>;
|
||||
phy-names = "phy0", "phy1";
|
||||
dma-coherent;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usbphy1: usb-phy@10000 {
|
||||
compatible = "brcm,sr-usb-combo-phy";
|
||||
reg = <0x00010000 0x100>;
|
||||
#phy-cells = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usbphy2: usb-phy@20000 {
|
||||
compatible = "brcm,sr-usb-hs-phy";
|
||||
reg = <0x00020000 0x100>;
|
||||
#phy-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
xhci1: usb@11000 {
|
||||
compatible = "generic-xhci";
|
||||
reg = <0x00011000 0x1000>;
|
||||
interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phys = <&usbphy1 1>, <&usbphy2>, <&usbphy1 0>;
|
||||
phy-names = "phy0", "phy1", "phy2";
|
||||
dma-coherent;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
bdc1: usb@21000 {
|
||||
compatible = "brcm,bdc-v0.16";
|
||||
reg = <0x00021000 0x1000>;
|
||||
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phys = <&usbphy2>;
|
||||
phy-names = "phy0";
|
||||
dma-coherent;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
@ -287,6 +287,7 @@ gpio_crmu: gpio@24800 {
|
|||
#include "stingray-fs4.dtsi"
|
||||
#include "stingray-sata.dtsi"
|
||||
#include "stingray-pcie.dtsi"
|
||||
#include "stingray-usb.dtsi"
|
||||
|
||||
hsls {
|
||||
compatible = "simple-bus";
|
||||
|
|
@ -612,4 +613,111 @@ sdio1: sdhci@3f2000 {
|
|||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
tmons {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0x0 0x8f100000 0x100>;
|
||||
|
||||
tmon: tmon@0 {
|
||||
compatible = "brcm,sr-thermal";
|
||||
reg = <0x0 0x40>;
|
||||
brcm,tmon-mask = <0x3f>;
|
||||
#thermal-sensor-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
thermal-zones {
|
||||
ihost0_thermal: ihost0-thermal {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <1000>;
|
||||
thermal-sensors = <&tmon 0>;
|
||||
trips {
|
||||
cpu-crit {
|
||||
temperature = <105000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
ihost1_thermal: ihost1-thermal {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <1000>;
|
||||
thermal-sensors = <&tmon 1>;
|
||||
trips {
|
||||
cpu-crit {
|
||||
temperature = <105000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
ihost2_thermal: ihost2-thermal {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <1000>;
|
||||
thermal-sensors = <&tmon 2>;
|
||||
trips {
|
||||
cpu-crit {
|
||||
temperature = <105000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
ihost3_thermal: ihost3-thermal {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <1000>;
|
||||
thermal-sensors = <&tmon 3>;
|
||||
trips {
|
||||
cpu-crit {
|
||||
temperature = <105000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
crmu_thermal: crmu-thermal {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <1000>;
|
||||
thermal-sensors = <&tmon 4>;
|
||||
trips {
|
||||
cpu-crit {
|
||||
temperature = <105000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
nitro_thermal: nitro-thermal {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <1000>;
|
||||
thermal-sensors = <&tmon 5>;
|
||||
trips {
|
||||
cpu-crit {
|
||||
temperature = <105000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
nic-hsls {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0x0 0x0 0x7fffffff>;
|
||||
|
||||
nic_i2c0: i2c@60826100 {
|
||||
compatible = "brcm,iproc-nic-i2c";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x60826100 0x100>,
|
||||
<0x60e00408 0x1000>;
|
||||
brcm,ape-hsls-addr-mask = <0x03400000>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue