From 70c3967d4f8029f3d53323a9f0490df61d8cb77d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 21 Jun 2006 12:11:16 +0200 Subject: [PATCH 01/43] [POWERPC] Convert powermac ide blink to new led infrastructure This patch removes the old pmac ide led blink code and adds generic LED subsystem support for the LED. It maintains backward compatibility with the old BLK_DEV_IDE_PMAC_BLINK Kconfig option which now simply selects the new code and influences the default trigger. Signed-off-by: Johannes Berg Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- drivers/ide/Kconfig | 9 +- drivers/ide/ppc/pmac.c | 125 --------------------------- drivers/macintosh/Kconfig | 11 +++ drivers/macintosh/Makefile | 1 + drivers/macintosh/via-pmu-led.c | 144 ++++++++++++++++++++++++++++++++ 5 files changed, 164 insertions(+), 126 deletions(-) create mode 100644 drivers/macintosh/via-pmu-led.c diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index d633081fa4c5..d1266fe2d1ab 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -774,11 +774,18 @@ config BLK_DEV_IDEDMA_PMAC performance. config BLK_DEV_IDE_PMAC_BLINK - bool "Blink laptop LED on drive activity" + bool "Blink laptop LED on drive activity (DEPRECATED)" depends on BLK_DEV_IDE_PMAC && ADB_PMU + select ADB_PMU_LED + select LEDS_TRIGGERS + select LEDS_TRIGGER_IDE_DISK help This option enables the use of the sleep LED as a hard drive activity LED. + This option is deprecated, it only selects ADB_PMU_LED and + LEDS_TRIGGER_IDE_DISK and changes the code in the new led class + device to default to the ide-disk trigger (which should be set + from userspace via sysfs). config BLK_DEV_IDE_SWARM tristate "IDE for Sibyte evaluation boards" diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index ffca8b63ee79..e8ef3455ec35 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -420,107 +420,6 @@ static void pmac_ide_kauai_selectproc(ide_drive_t *drive); #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ -/* - * Below is the code for blinking the laptop LED along with hard - * disk activity. - */ - -#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK - -/* Set to 50ms minimum led-on time (also used to limit frequency - * of requests sent to the PMU - */ -#define PMU_HD_BLINK_TIME (HZ/50) - -static struct adb_request pmu_blink_on, pmu_blink_off; -static spinlock_t pmu_blink_lock; -static unsigned long pmu_blink_stoptime; -static int pmu_blink_ledstate; -static struct timer_list pmu_blink_timer; -static int pmu_ide_blink_enabled; - - -static void -pmu_hd_blink_timeout(unsigned long data) -{ - unsigned long flags; - - spin_lock_irqsave(&pmu_blink_lock, flags); - - /* We may have been triggered again in a racy way, check - * that we really want to switch it off - */ - if (time_after(pmu_blink_stoptime, jiffies)) - goto done; - - /* Previous req. not complete, try 100ms more */ - if (pmu_blink_off.complete == 0) - mod_timer(&pmu_blink_timer, jiffies + PMU_HD_BLINK_TIME); - else if (pmu_blink_ledstate) { - pmu_request(&pmu_blink_off, NULL, 4, 0xee, 4, 0, 0); - pmu_blink_ledstate = 0; - } -done: - spin_unlock_irqrestore(&pmu_blink_lock, flags); -} - -static void -pmu_hd_kick_blink(void *data, int rw) -{ - unsigned long flags; - - pmu_blink_stoptime = jiffies + PMU_HD_BLINK_TIME; - wmb(); - mod_timer(&pmu_blink_timer, pmu_blink_stoptime); - /* Fast path when LED is already ON */ - if (pmu_blink_ledstate == 1) - return; - spin_lock_irqsave(&pmu_blink_lock, flags); - if (pmu_blink_on.complete && !pmu_blink_ledstate) { - pmu_request(&pmu_blink_on, NULL, 4, 0xee, 4, 0, 1); - pmu_blink_ledstate = 1; - } - spin_unlock_irqrestore(&pmu_blink_lock, flags); -} - -static int -pmu_hd_blink_init(void) -{ - struct device_node *dt; - const char *model; - - /* Currently, I only enable this feature on KeyLargo based laptops, - * older laptops may support it (at least heathrow/paddington) but - * I don't feel like loading those venerable old machines with so - * much additional interrupt & PMU activity... - */ - if (pmu_get_model() != PMU_KEYLARGO_BASED) - return 0; - - dt = of_find_node_by_path("/"); - if (dt == NULL) - return 0; - model = (const char *)get_property(dt, "model", NULL); - if (model == NULL) - return 0; - if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 && - strncmp(model, "iBook", strlen("iBook")) != 0) { - of_node_put(dt); - return 0; - } - of_node_put(dt); - - pmu_blink_on.complete = 1; - pmu_blink_off.complete = 1; - spin_lock_init(&pmu_blink_lock); - init_timer(&pmu_blink_timer); - pmu_blink_timer.function = pmu_hd_blink_timeout; - - return 1; -} - -#endif /* CONFIG_BLK_DEV_IDE_PMAC_BLINK */ - /* * N.B. this can't be an initfunc, because the media-bay task can * call ide_[un]register at any time. @@ -1192,23 +1091,6 @@ pmac_ide_do_suspend(ide_hwif_t *hwif) pmif->timings[0] = 0; pmif->timings[1] = 0; -#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK - /* Note: This code will be called for every hwif, thus we'll - * try several time to stop the LED blinker timer, but that - * should be harmless - */ - if (pmu_ide_blink_enabled) { - unsigned long flags; - - /* Make sure we don't hit the PMU blink */ - spin_lock_irqsave(&pmu_blink_lock, flags); - if (pmu_blink_ledstate) - del_timer(&pmu_blink_timer); - pmu_blink_ledstate = 0; - spin_unlock_irqrestore(&pmu_blink_lock, flags); - } -#endif /* CONFIG_BLK_DEV_IDE_PMAC_BLINK */ - disable_irq(pmif->irq); /* The media bay will handle itself just fine */ @@ -1376,13 +1258,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) hwif->selectproc = pmac_ide_selectproc; hwif->speedproc = pmac_ide_tune_chipset; -#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK - pmu_ide_blink_enabled = pmu_hd_blink_init(); - - if (pmu_ide_blink_enabled) - hwif->led_act = pmu_hd_kick_blink; -#endif - printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n", hwif->index, model_name[pmif->kind], pmif->aapl_bus_id, pmif->mediabay ? " (mediabay)" : "", hwif->irq); diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 37cd6ee4586b..062dac26f2ae 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -78,6 +78,17 @@ config ADB_PMU this device; you should do so if your machine is one of those mentioned above. +config ADB_PMU_LED + bool "Support for the Power/iBook front LED" + depends on ADB_PMU + select LEDS_CLASS + help + Support the front LED on Power/iBooks as a generic LED that can + be triggered by any of the supported triggers. To get the + behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this + and the ide-disk LED trigger and configure appropriately through + sysfs. + config PMAC_SMU bool "Support for SMU based PowerMacs" depends on PPC_PMAC64 diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile index 45a268f8047e..b53d45f87b0b 100644 --- a/drivers/macintosh/Makefile +++ b/drivers/macintosh/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_INPUT_ADBHID) += adbhid.o obj-$(CONFIG_ANSLCD) += ans-lcd.o obj-$(CONFIG_ADB_PMU) += via-pmu.o via-pmu-event.o +obj-$(CONFIG_ADB_PMU_LED) += via-pmu-led.o obj-$(CONFIG_PMAC_BACKLIGHT) += via-pmu-backlight.o obj-$(CONFIG_ADB_CUDA) += via-cuda.o obj-$(CONFIG_PMAC_APM_EMU) += apm_emu.o diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c new file mode 100644 index 000000000000..af8375ed0f5e --- /dev/null +++ b/drivers/macintosh/via-pmu-led.c @@ -0,0 +1,144 @@ +/* + * via-pmu LED class device + * + * Copyright 2006 Johannes Berg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ +#include +#include +#include +#include +#include +#include +#include + +static spinlock_t pmu_blink_lock; +static struct adb_request pmu_blink_req; +/* -1: no change, 0: request off, 1: request on */ +static int requested_change; +static int sleeping; + +static void pmu_req_done(struct adb_request * req) +{ + unsigned long flags; + + spin_lock_irqsave(&pmu_blink_lock, flags); + /* if someone requested a change in the meantime + * (we only see the last one which is fine) + * then apply it now */ + if (requested_change != -1 && !sleeping) + pmu_request(&pmu_blink_req, NULL, 4, 0xee, 4, 0, requested_change); + /* reset requested change */ + requested_change = -1; + spin_unlock_irqrestore(&pmu_blink_lock, flags); +} + +static void pmu_led_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + unsigned long flags; + + spin_lock_irqsave(&pmu_blink_lock, flags); + switch (brightness) { + case LED_OFF: + requested_change = 0; + break; + case LED_FULL: + requested_change = 1; + break; + default: + goto out; + break; + } + /* if request isn't done, then don't do anything */ + if (pmu_blink_req.complete && !sleeping) + pmu_request(&pmu_blink_req, NULL, 4, 0xee, 4, 0, requested_change); + out: + spin_unlock_irqrestore(&pmu_blink_lock, flags); +} + +static struct led_classdev pmu_led = { + .name = "pmu-front-led", +#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK + .default_trigger = "ide-disk", +#endif + .brightness_set = pmu_led_set, +}; + +#ifdef CONFIG_PM +static int pmu_led_sleep_call(struct pmu_sleep_notifier *self, int when) +{ + unsigned long flags; + + spin_lock_irqsave(&pmu_blink_lock, flags); + + switch (when) { + case PBOOK_SLEEP_REQUEST: + sleeping = 1; + break; + case PBOOK_WAKE: + sleeping = 0; + break; + default: + /* do nothing */ + break; + } + spin_unlock_irqrestore(&pmu_blink_lock, flags); + + return PBOOK_SLEEP_OK; +} + +static struct pmu_sleep_notifier via_pmu_led_sleep_notif = { + .notifier_call = pmu_led_sleep_call, +}; +#endif + +static int __init via_pmu_led_init(void) +{ + struct device_node *dt; + const char *model; + + /* only do this on keylargo based models */ + if (pmu_get_model() != PMU_KEYLARGO_BASED) + return -ENODEV; + + dt = of_find_node_by_path("/"); + if (dt == NULL) + return -ENODEV; + model = (const char *)get_property(dt, "model", NULL); + if (model == NULL) + return -ENODEV; + if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 && + strncmp(model, "iBook", strlen("iBook")) != 0) { + of_node_put(dt); + /* ignore */ + return -ENODEV; + } + of_node_put(dt); + + spin_lock_init(&pmu_blink_lock); + /* no outstanding req */ + pmu_blink_req.complete = 1; + pmu_blink_req.done = pmu_req_done; +#ifdef CONFIG_PM + pmu_register_sleep_notifier(&via_pmu_led_sleep_notif); +#endif + return led_classdev_register(NULL, &pmu_led); +} + +late_initcall(via_pmu_led_init); From 6d7c466292fc7c90bb160c1c7df74035c7c12595 Mon Sep 17 00:00:00 2001 From: Jimi Xenidis Date: Wed, 21 Jun 2006 19:15:55 -0400 Subject: [PATCH 02/43] [POWERPC] Don't access HID registers if running on a Hypervisor. The following patch avoids accessing Hypervisor privilege HID registers when running on a Hypervisor (MSR[HV]=0). Signed-off-by: Jimi Xenidis Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/cpu_setup_power4.S | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/cpu_setup_power4.S b/arch/powerpc/kernel/cpu_setup_power4.S index 271418308d53..1fc863261003 100644 --- a/arch/powerpc/kernel/cpu_setup_power4.S +++ b/arch/powerpc/kernel/cpu_setup_power4.S @@ -125,7 +125,12 @@ _GLOBAL(__save_cpu_setup) cmpwi r0,0x44 bne 2f -1: /* Save HID0,1,4 and 5 */ +1: /* skip if not running in HV mode */ + mfmsr r0 + rldicl. r0,r0,4,63 + beq 2f + + /* Save HID0,1,4 and 5 */ mfspr r3,SPRN_HID0 std r3,CS_HID0(r5) mfspr r3,SPRN_HID1 @@ -159,7 +164,12 @@ _GLOBAL(__restore_cpu_setup) cmpwi r0,0x44 bnelr -1: /* Before accessing memory, we make sure rm_ci is clear */ +1: /* skip if not running in HV mode */ + mfmsr r0 + rldicl. r0,r0,4,63 + beqlr + + /* Before accessing memory, we make sure rm_ci is clear */ li r0,0 mfspr r3,SPRN_HID4 rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */ From c53b33420a2e0ed1eb86be1c00b2dc21bb92bd6e Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Thu, 22 Jun 2006 12:59:25 -0500 Subject: [PATCH 03/43] [POWERPC] Remove redundant PPC_86XX check. Signed-off-by: Jon Loeliger Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/86xx/Makefile | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile index 7be796c5d5c9..476a6eeee710 100644 --- a/arch/powerpc/platforms/86xx/Makefile +++ b/arch/powerpc/platforms/86xx/Makefile @@ -2,9 +2,6 @@ # Makefile for the PowerPC 86xx linux kernel. # - -ifeq ($(CONFIG_PPC_86xx),y) obj-$(CONFIG_SMP) += mpc86xx_smp.o -endif obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o obj-$(CONFIG_PCI) += pci.o mpc86xx_pcie.o From f17607fb17aabd3a963da39799bde17d81211ab0 Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Thu, 22 Jun 2006 13:00:46 -0500 Subject: [PATCH 04/43] [POWERPC] Move I8259 selection under MPC8641HPCN board Signed-off-by: Jon Loeliger Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 1 - arch/powerpc/platforms/86xx/Kconfig | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index e922a88b2bad..c5e01c4b637d 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -794,7 +794,6 @@ config GENERIC_ISA_DMA config PPC_I8259 bool - default y if MPC8641_HPCN default n config PPC_INDIRECT_PCI diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 3a87863d2876..3d2b21aa1b57 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -7,6 +7,7 @@ choice config MPC8641_HPCN bool "Freescale MPC8641 HPCN" + select PPC_I8259 help This option enables support for the MPC8641 HPCN board. From 790d427616ae68559b711bf4348003c17249abf4 Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Thu, 22 Jun 2006 13:01:48 -0500 Subject: [PATCH 05/43] [POWERPC] Remove redundant STD_MMU selection. Signed-off-by: Jon Loeliger Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/86xx/Kconfig | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 3d2b21aa1b57..d1ecc0f9ab58 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -29,9 +29,4 @@ config PPC_INDIRECT_PCI_BE depends on PPC_86xx default y -config PPC_STD_MMU - bool - depends on PPC_86xx - default y - endmenu From f93d6d071fdbf27141c5331d6cd988664650bc1f Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Thu, 22 Jun 2006 13:02:58 -0500 Subject: [PATCH 06/43] [POWERPC] Remove obsolete #include . Signed-off-by: Jon Loeliger Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/86xx/mpc8641_hpcn.h | 1 - arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 1 - arch/powerpc/platforms/86xx/mpc86xx_smp.c | 1 - arch/powerpc/platforms/86xx/pci.c | 1 - include/asm-powerpc/mpc86xx.h | 1 - 5 files changed, 5 deletions(-) diff --git a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h index 5042253758b7..5d2bcf78cef7 100644 --- a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h +++ b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h @@ -14,7 +14,6 @@ #ifndef __MPC8641_HPCN_H__ #define __MPC8641_HPCN_H__ -#include #include /* PCI interrupt controller */ diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index 483c21df181e..a9a8539ec0a2 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -12,7 +12,6 @@ * option) any later version. */ -#include #include #include #include diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c index 944ec4b71416..167f0401a1c5 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c @@ -10,7 +10,6 @@ * option) any later version. */ -#include #include #include #include diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c index 5180df7c75bc..6dfdcb875878 100644 --- a/arch/powerpc/platforms/86xx/pci.c +++ b/arch/powerpc/platforms/86xx/pci.c @@ -12,7 +12,6 @@ * option) any later version. */ -#include #include #include #include diff --git a/include/asm-powerpc/mpc86xx.h b/include/asm-powerpc/mpc86xx.h index d0a6718d188b..1ed72f6b1210 100644 --- a/include/asm-powerpc/mpc86xx.h +++ b/include/asm-powerpc/mpc86xx.h @@ -15,7 +15,6 @@ #ifndef __ASM_POWERPC_MPC86xx_H__ #define __ASM_POWERPC_MPC86xx_H__ -#include #include #ifdef CONFIG_PPC_86xx From 5f50867b4f1938ab80d249206efbec37bba48c39 Mon Sep 17 00:00:00 2001 From: Haren Myneni Date: Thu, 22 Jun 2006 23:35:10 -0700 Subject: [PATCH 07/43] [POWERPC] kdump: Reserve the existing TCE mappings left by the first kernel During kdump boot, noticed some machines checkstop on dma protection fault for ongoing DMA left in the first kernel. Instead of initializing TCE entries in iommu_init() for the kdump boot, this patch fixes this issue by walking through the each TCE table and checks whether the entries are in use by the first kernel. If so, reserve those entries by setting the corresponding bit in tbl->it_map such that these entries will not be available for the kdump boot. However it could be possible that all TCE entries might be used up due to the driver bug that does continuous mapping. My observation is around 1700 TCE entries are used on some systems (Ex: P4) at some point of time during kdump boot and saving dump (either write into the disk or sending to remote machine). Hence, this patch will make sure that minimum of 2048 entries will be available such that kdump boot could be successful in some cases. Signed-off-by: Haren Myneni Acked-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/iommu.c | 30 +++++++++++++++++++++++ arch/powerpc/platforms/pseries/iommu.c | 33 ++++++++++++++++++++++++++ include/asm-powerpc/kdump.h | 2 ++ include/asm-powerpc/machdep.h | 2 ++ 4 files changed, 67 insertions(+) diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index 7cb77c20fc5d..3d677ac99659 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -38,6 +38,7 @@ #include #include #include +#include #define DBG(...) @@ -440,8 +441,37 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid) tbl->it_largehint = tbl->it_halfpoint; spin_lock_init(&tbl->it_lock); +#ifdef CONFIG_CRASH_DUMP + if (ppc_md.tce_get) { + unsigned long index, tceval; + unsigned long tcecount = 0; + + /* + * Reserve the existing mappings left by the first kernel. + */ + for (index = 0; index < tbl->it_size; index++) { + tceval = ppc_md.tce_get(tbl, index + tbl->it_offset); + /* + * Freed TCE entry contains 0x7fffffffffffffff on JS20 + */ + if (tceval && (tceval != 0x7fffffffffffffffUL)) { + __set_bit(index, tbl->it_map); + tcecount++; + } + } + if ((tbl->it_size - tcecount) < KDUMP_MIN_TCE_ENTRIES) { + printk(KERN_WARNING "TCE table is full; "); + printk(KERN_WARNING "freeing %d entries for the kdump boot\n", + KDUMP_MIN_TCE_ENTRIES); + for (index = tbl->it_size - KDUMP_MIN_TCE_ENTRIES; + index < tbl->it_size; index++) + __clear_bit(index, tbl->it_map); + } + } +#else /* Clear the hardware table in case firmware left allocations in it */ ppc_md.tce_free(tbl, tbl->it_offset, tbl->it_size); +#endif if (!welcomed) { printk(KERN_INFO "IOMMU table initialized, virtual merging %s\n", diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index d03a8b078f9d..8cfb5706790e 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -92,6 +92,15 @@ static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages) *(tcep++) = 0; } +static unsigned long tce_get_pseries(struct iommu_table *tbl, long index) +{ + u64 *tcep; + + index <<= TCE_PAGE_FACTOR; + tcep = ((u64 *)tbl->it_base) + index; + + return *tcep; +} static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages, unsigned long uaddr, @@ -235,6 +244,25 @@ static void tce_freemulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long n } } +static unsigned long tce_get_pSeriesLP(struct iommu_table *tbl, long tcenum) +{ + u64 rc; + unsigned long tce_ret; + + tcenum <<= TCE_PAGE_FACTOR; + rc = plpar_tce_get((u64)tbl->it_index, (u64)tcenum << 12, &tce_ret); + + if (rc && printk_ratelimit()) { + printk("tce_get_pSeriesLP: plpar_tce_get failed. rc=%ld\n", + rc); + printk("\tindex = 0x%lx\n", (u64)tbl->it_index); + printk("\ttcenum = 0x%lx\n", (u64)tcenum); + show_stack(current, (unsigned long *)__get_SP()); + } + + return tce_ret; +} + static void iommu_table_setparms(struct pci_controller *phb, struct device_node *dn, struct iommu_table *tbl) @@ -254,7 +282,10 @@ static void iommu_table_setparms(struct pci_controller *phb, } tbl->it_base = (unsigned long)__va(*basep); + +#ifndef CONFIG_CRASH_DUMP memset((void *)tbl->it_base, 0, *sizep); +#endif tbl->it_busno = phb->bus->number; @@ -560,11 +591,13 @@ void iommu_init_early_pSeries(void) ppc_md.tce_build = tce_build_pSeriesLP; ppc_md.tce_free = tce_free_pSeriesLP; } + ppc_md.tce_get = tce_get_pSeriesLP; ppc_md.iommu_bus_setup = iommu_bus_setup_pSeriesLP; ppc_md.iommu_dev_setup = iommu_dev_setup_pSeriesLP; } else { ppc_md.tce_build = tce_build_pSeries; ppc_md.tce_free = tce_free_pSeries; + ppc_md.tce_get = tce_get_pseries; ppc_md.iommu_bus_setup = iommu_bus_setup_pSeries; ppc_md.iommu_dev_setup = iommu_dev_setup_pSeries; } diff --git a/include/asm-powerpc/kdump.h b/include/asm-powerpc/kdump.h index 5a5c3b5ab1e0..dc1574c945f8 100644 --- a/include/asm-powerpc/kdump.h +++ b/include/asm-powerpc/kdump.h @@ -15,6 +15,8 @@ #define KDUMP_TRAMPOLINE_START 0x0100 #define KDUMP_TRAMPOLINE_END 0x3000 +#define KDUMP_MIN_TCE_ENTRIES 2048 + #else /* !CONFIG_CRASH_DUMP */ #define PHYSICAL_START 0x0 diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index 73db1f71329d..eba133d149a7 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -81,6 +81,8 @@ struct machdep_calls { void (*tce_free)(struct iommu_table *tbl, long index, long npages); + unsigned long (*tce_get)(struct iommu_table *tbl, + long index); void (*tce_flush)(struct iommu_table *tbl); void (*iommu_dev_setup)(struct pci_dev *dev); void (*iommu_bus_setup)(struct pci_bus *bus); From 1dce0e30471ac863fd141d137c98e3644817975e Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 23 Jun 2006 18:15:37 +1000 Subject: [PATCH 08/43] [POWERPC] Remove remaining iSeries debugger cruft None of this seems to be necessary, so let's see if can remove it and not break anything. Booted on iSeries & pSeries here. NB. we don't remove the hvReleaseData, we just move it down so that the file reads more clearly. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/head_64.S | 37 +++++++------------------- arch/powerpc/platforms/iseries/setup.c | 12 --------- 2 files changed, 9 insertions(+), 40 deletions(-) diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 831acbdf2592..be5560a2e441 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -85,34 +85,6 @@ END_FTR_SECTION(0, 1) /* Catch branch to 0 in real mode */ trap -#ifdef CONFIG_PPC_ISERIES - /* - * At offset 0x20, there is a pointer to iSeries LPAR data. - * This is required by the hypervisor - */ - . = 0x20 - .llong hvReleaseData-KERNELBASE - - /* - * At offset 0x28 and 0x30 are offsets to the mschunks_map - * array (used by the iSeries LPAR debugger to do translation - * between physical addresses and absolute addresses) and - * to the pidhash table (also used by the debugger) - */ - .llong mschunks_map-KERNELBASE - .llong 0 /* pidhash-KERNELBASE SFRXXX */ - - /* Offset 0x38 - Pointer to start of embedded System.map */ - .globl embedded_sysmap_start -embedded_sysmap_start: - .llong 0 - /* Offset 0x40 - Pointer to end of embedded System.map */ - .globl embedded_sysmap_end -embedded_sysmap_end: - .llong 0 - -#endif /* CONFIG_PPC_ISERIES */ - /* Secondary processors spin on this value until it goes to 1. */ .globl __secondary_hold_spinloop __secondary_hold_spinloop: @@ -124,6 +96,15 @@ __secondary_hold_spinloop: __secondary_hold_acknowledge: .llong 0x0 +#ifdef CONFIG_PPC_ISERIES + /* + * At offset 0x20, there is a pointer to iSeries LPAR data. + * This is required by the hypervisor + */ + . = 0x20 + .llong hvReleaseData-KERNELBASE +#endif /* CONFIG_PPC_ISERIES */ + . = 0x60 /* * The following code is used on pSeries to hold secondary processors diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 617c724c4590..973f5aa71657 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -81,8 +81,6 @@ static void iSeries_pci_final_fixup(void) { } #endif extern int rd_size; /* Defined in drivers/block/rd.c */ -extern unsigned long embedded_sysmap_start; -extern unsigned long embedded_sysmap_end; extern unsigned long iSeries_recal_tb; extern unsigned long iSeries_recal_titan; @@ -563,16 +561,6 @@ static void __init iSeries_fixup_klimit(void) if (naca.xRamDisk) klimit = KERNELBASE + (u64)naca.xRamDisk + (naca.xRamDiskSize * HW_PAGE_SIZE); - else { - /* - * No ram disk was included - check and see if there - * was an embedded system map. Change klimit to take - * into account any embedded system map - */ - if (embedded_sysmap_end) - klimit = KERNELBASE + ((embedded_sysmap_end + 4095) & - 0xfffffffffffff000); - } } static int __init iSeries_src_init(void) From 7a4571ae553e2972b7958306fd796a2fd24fd7d1 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 23 Jun 2006 18:16:03 +1000 Subject: [PATCH 09/43] [POWERPC] Export flat device tree via debugfs for debugging If DEBUG is turned on in prom.c, export the flat device tree via debugfs. This has been handy on several occasions. To look at it: # mount -t debugfs none /sys/kernel/debug # od -a /sys/kernel/debug/powerpc/flat-device-tree and/or # dtc -fI dtb /sys/kernel/debug/powerpc/flat-device-tree -O dts Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 483455c5bb02..efed4bc2b454 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -2148,3 +2149,27 @@ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread) } return NULL; } + +#ifdef DEBUG +static struct debugfs_blob_wrapper flat_dt_blob; + +static int __init export_flat_device_tree(void) +{ + struct dentry *d; + + d = debugfs_create_dir("powerpc", NULL); + if (!d) + return 1; + + flat_dt_blob.data = initial_boot_params; + flat_dt_blob.size = initial_boot_params->totalsize; + + d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR, + d, &flat_dt_blob); + if (!d) + return 1; + + return 0; +} +__initcall(export_flat_device_tree); +#endif From 7d0daae4ae1a3e80d78b83cddf414a3b98a962f4 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 23 Jun 2006 18:16:38 +1000 Subject: [PATCH 10/43] [POWERPC] powerpc: Initialise ppc_md htab pointers earlier Initialise the ppc_md htab callbacks earlier, in the probe routines. This allows us to call htab_finish_init() from htab_initialize(), and makes it private to hash_utils_64.c. Move htab_finish_init() and make_bl() above htab_initialize() to avoid forward declarations. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/setup_64.c | 6 +-- arch/powerpc/mm/hash_native_64.c | 3 +- arch/powerpc/mm/hash_utils_64.c | 72 +++++++++++++------------ arch/powerpc/platforms/cell/setup.c | 12 ++--- arch/powerpc/platforms/iseries/htab.c | 4 +- arch/powerpc/platforms/iseries/setup.c | 7 +-- arch/powerpc/platforms/maple/setup.c | 7 +-- arch/powerpc/platforms/powermac/setup.c | 9 +--- arch/powerpc/platforms/pseries/lpar.c | 4 +- arch/powerpc/platforms/pseries/setup.c | 10 ++-- include/asm-powerpc/mmu.h | 1 - 11 files changed, 58 insertions(+), 77 deletions(-) diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 78f3a5fd43f6..6f213a9e36bf 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -358,11 +358,7 @@ void __init setup_system(void) * Fill the ppc64_caches & systemcfg structures with informations * retrieved from the device-tree. Need to be called before * finish_device_tree() since the later requires some of the - * informations filled up here to properly parse the interrupt - * tree. - * It also sets up the cache line sizes which allows to call - * routines like flush_icache_range (used by the hash init - * later on). + * informations filled up here to properly parse the interrupt tree. */ initialize_cache_info(); diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c index a0f3cbd00d39..c90f124f3c71 100644 --- a/arch/powerpc/mm/hash_native_64.c +++ b/arch/powerpc/mm/hash_native_64.c @@ -520,7 +520,7 @@ static inline int tlb_batching_enabled(void) } #endif -void hpte_init_native(void) +void __init hpte_init_native(void) { ppc_md.hpte_invalidate = native_hpte_invalidate; ppc_md.hpte_updatepp = native_hpte_updatepp; @@ -530,5 +530,4 @@ void hpte_init_native(void) ppc_md.hpte_clear_all = native_hpte_clear; if (tlb_batching_enabled()) ppc_md.flush_hash_range = native_flush_hash_range; - htab_finish_init(); } diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index d03fd2b4445e..9cefe6a7aeb1 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -413,6 +413,41 @@ void create_section_mapping(unsigned long start, unsigned long end) } #endif /* CONFIG_MEMORY_HOTPLUG */ +static inline void make_bl(unsigned int *insn_addr, void *func) +{ + unsigned long funcp = *((unsigned long *)func); + int offset = funcp - (unsigned long)insn_addr; + + *insn_addr = (unsigned int)(0x48000001 | (offset & 0x03fffffc)); + flush_icache_range((unsigned long)insn_addr, 4+ + (unsigned long)insn_addr); +} + +static void __init htab_finish_init(void) +{ + extern unsigned int *htab_call_hpte_insert1; + extern unsigned int *htab_call_hpte_insert2; + extern unsigned int *htab_call_hpte_remove; + extern unsigned int *htab_call_hpte_updatepp; + +#ifdef CONFIG_PPC_64K_PAGES + extern unsigned int *ht64_call_hpte_insert1; + extern unsigned int *ht64_call_hpte_insert2; + extern unsigned int *ht64_call_hpte_remove; + extern unsigned int *ht64_call_hpte_updatepp; + + make_bl(ht64_call_hpte_insert1, ppc_md.hpte_insert); + make_bl(ht64_call_hpte_insert2, ppc_md.hpte_insert); + make_bl(ht64_call_hpte_remove, ppc_md.hpte_remove); + make_bl(ht64_call_hpte_updatepp, ppc_md.hpte_updatepp); +#endif /* CONFIG_PPC_64K_PAGES */ + + make_bl(htab_call_hpte_insert1, ppc_md.hpte_insert); + make_bl(htab_call_hpte_insert2, ppc_md.hpte_insert); + make_bl(htab_call_hpte_remove, ppc_md.hpte_remove); + make_bl(htab_call_hpte_updatepp, ppc_md.hpte_updatepp); +} + void __init htab_initialize(void) { unsigned long table; @@ -525,6 +560,8 @@ void __init htab_initialize(void) mmu_linear_psize)); } + htab_finish_init(); + DBG(" <- htab_initialize()\n"); } #undef KB @@ -787,16 +824,6 @@ void flush_hash_range(unsigned long number, int local) } } -static inline void make_bl(unsigned int *insn_addr, void *func) -{ - unsigned long funcp = *((unsigned long *)func); - int offset = funcp - (unsigned long)insn_addr; - - *insn_addr = (unsigned int)(0x48000001 | (offset & 0x03fffffc)); - flush_icache_range((unsigned long)insn_addr, 4+ - (unsigned long)insn_addr); -} - /* * low_hash_fault is called when we the low level hash code failed * to instert a PTE due to an hypervisor error @@ -815,28 +842,3 @@ void low_hash_fault(struct pt_regs *regs, unsigned long address) } bad_page_fault(regs, address, SIGBUS); } - -void __init htab_finish_init(void) -{ - extern unsigned int *htab_call_hpte_insert1; - extern unsigned int *htab_call_hpte_insert2; - extern unsigned int *htab_call_hpte_remove; - extern unsigned int *htab_call_hpte_updatepp; - -#ifdef CONFIG_PPC_64K_PAGES - extern unsigned int *ht64_call_hpte_insert1; - extern unsigned int *ht64_call_hpte_insert2; - extern unsigned int *ht64_call_hpte_remove; - extern unsigned int *ht64_call_hpte_updatepp; - - make_bl(ht64_call_hpte_insert1, ppc_md.hpte_insert); - make_bl(ht64_call_hpte_insert2, ppc_md.hpte_insert); - make_bl(ht64_call_hpte_remove, ppc_md.hpte_remove); - make_bl(ht64_call_hpte_updatepp, ppc_md.hpte_updatepp); -#endif /* CONFIG_PPC_64K_PAGES */ - - make_bl(htab_call_hpte_insert1, ppc_md.hpte_insert); - make_bl(htab_call_hpte_insert2, ppc_md.hpte_insert); - make_bl(htab_call_hpte_remove, ppc_md.hpte_remove); - make_bl(htab_call_hpte_updatepp, ppc_md.hpte_updatepp); -} diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index 3d1831d331e5..2436eaab701d 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -125,8 +125,6 @@ static void __init cell_init_early(void) { DBG(" -> cell_init_early()\n"); - hpte_init_native(); - cell_init_iommu(); ppc64_interrupt_controller = IC_CELL_PIC; @@ -139,11 +137,13 @@ static int __init cell_probe(void) { unsigned long root = of_get_flat_dt_root(); - if (of_flat_dt_is_compatible(root, "IBM,CBEA") || - of_flat_dt_is_compatible(root, "IBM,CPBW-1.0")) - return 1; + if (!of_flat_dt_is_compatible(root, "IBM,CBEA") && + !of_flat_dt_is_compatible(root, "IBM,CPBW-1.0")) + return 0; - return 0; + hpte_init_native(); + + return 1; } /* diff --git a/arch/powerpc/platforms/iseries/htab.c b/arch/powerpc/platforms/iseries/htab.c index 30bdcf3925d9..ed44dfceaa45 100644 --- a/arch/powerpc/platforms/iseries/htab.c +++ b/arch/powerpc/platforms/iseries/htab.c @@ -242,13 +242,11 @@ static void iSeries_hpte_invalidate(unsigned long slot, unsigned long va, local_irq_restore(flags); } -void hpte_init_iSeries(void) +void __init hpte_init_iSeries(void) { ppc_md.hpte_invalidate = iSeries_hpte_invalidate; ppc_md.hpte_updatepp = iSeries_hpte_updatepp; ppc_md.hpte_updateboltedpp = iSeries_hpte_updateboltedpp; ppc_md.hpte_insert = iSeries_hpte_insert; ppc_md.hpte_remove = iSeries_hpte_remove; - - htab_finish_init(); } diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 973f5aa71657..66c77e4f8ec2 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -318,11 +318,6 @@ static void __init iSeries_init_early(void) iSeries_recal_tb = get_tb(); iSeries_recal_titan = HvCallXm_loadTod(); - /* - * Initialize the hash table management pointers - */ - hpte_init_iSeries(); - /* * Initialize the DMA/TCE management */ @@ -671,6 +666,8 @@ static int __init iseries_probe(void) */ virt_irq_max = 255; + hpte_init_iSeries(); + return 1; } diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index a0505ea48a86..4e32a5417fd1 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -199,11 +199,6 @@ static void __init maple_init_early(void) { DBG(" -> maple_init_early\n"); - /* Initialize hash table, from now on, we can take hash faults - * and call ioremap - */ - hpte_init_native(); - /* Setup interrupt mapping options */ ppc64_interrupt_controller = IC_OPEN_PIC; @@ -272,6 +267,8 @@ static int __init maple_probe(void) */ alloc_dart_table(); + hpte_init_native(); + return 1; } diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 9cc7db7a8bdc..89c5775f83be 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -600,13 +600,6 @@ pmac_halt(void) */ static void __init pmac_init_early(void) { -#ifdef CONFIG_PPC64 - /* Initialize hash table, from now on, we can take hash faults - * and call ioremap - */ - hpte_init_native(); -#endif - /* Enable early btext debug if requested */ if (strstr(cmd_line, "btextdbg")) { udbg_adb_init_early(); @@ -683,6 +676,8 @@ static int __init pmac_probe(void) * part of the cacheable linar mapping */ alloc_dart_table(); + + hpte_init_native(); #endif #ifdef CONFIG_PPC32 diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 634b7d06d3cc..27480705996f 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -513,7 +513,7 @@ void pSeries_lpar_flush_hash_range(unsigned long number, int local) spin_unlock_irqrestore(&pSeries_lpar_tlbie_lock, flags); } -void hpte_init_lpar(void) +void __init hpte_init_lpar(void) { ppc_md.hpte_invalidate = pSeries_lpar_hpte_invalidate; ppc_md.hpte_updatepp = pSeries_lpar_hpte_updatepp; @@ -522,6 +522,4 @@ void hpte_init_lpar(void) ppc_md.hpte_remove = pSeries_lpar_hpte_remove; ppc_md.flush_hash_range = pSeries_lpar_flush_hash_range; ppc_md.hpte_clear_all = pSeries_lpar_hptab_clear; - - htab_finish_init(); } diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 1e28518c6121..b3197ff156c6 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -322,11 +322,6 @@ static void __init pSeries_init_early(void) DBG(" -> pSeries_init_early()\n"); fw_feature_init(); - - if (firmware_has_feature(FW_FEATURE_LPAR)) - hpte_init_lpar(); - else - hpte_init_native(); if (firmware_has_feature(FW_FEATURE_LPAR)) find_udbg_vterm(); @@ -384,6 +379,11 @@ static int __init pSeries_probe_hypertas(unsigned long node, if (of_get_flat_dt_prop(node, "ibm,hypertas-functions", NULL) != NULL) powerpc_firmware_features |= FW_FEATURE_LPAR; + if (firmware_has_feature(FW_FEATURE_LPAR)) + hpte_init_lpar(); + else + hpte_init_native(); + return 1; } diff --git a/include/asm-powerpc/mmu.h b/include/asm-powerpc/mmu.h index 3a5ebe229af5..c3fc7a28e3cd 100644 --- a/include/asm-powerpc/mmu.h +++ b/include/asm-powerpc/mmu.h @@ -238,7 +238,6 @@ extern int hash_huge_page(struct mm_struct *mm, unsigned long access, unsigned long ea, unsigned long vsid, int local, unsigned long trap); -extern void htab_finish_init(void); extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend, unsigned long pstart, unsigned long mode, int psize); From c30a4df3f134f511e8cdf828da429e333753daab Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 23 Jun 2006 18:16:39 +1000 Subject: [PATCH 11/43] [POWERPC] Use ppc_md.hpte_insert() in htab_bolt_mapping() With the ppc_md htab pointers setup earlier, we can use ppc_md.hpte_insert in htab_bolt_mapping(), rather than deciding which version to call by hand. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hash_utils_64.c | 34 ++++++--------------------------- 1 file changed, 6 insertions(+), 28 deletions(-) diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 9cefe6a7aeb1..3cc6d68f7117 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -167,34 +167,12 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, hash = hpt_hash(va, shift); hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP); - /* The crap below can be cleaned once ppd_md.probe() can - * set up the hash callbacks, thus we can just used the - * normal insert callback here. - */ -#ifdef CONFIG_PPC_ISERIES - if (machine_is(iseries)) - ret = iSeries_hpte_insert(hpteg, va, - paddr, - tmp_mode, - HPTE_V_BOLTED, - psize); - else -#endif -#ifdef CONFIG_PPC_PSERIES - if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) - ret = pSeries_lpar_hpte_insert(hpteg, va, - paddr, - tmp_mode, - HPTE_V_BOLTED, - psize); - else -#endif -#ifdef CONFIG_PPC_MULTIPLATFORM - ret = native_hpte_insert(hpteg, va, - paddr, - tmp_mode, HPTE_V_BOLTED, - psize); -#endif + DBG("htab_bolt_mapping: calling %p\n", ppc_md.hpte_insert); + + BUG_ON(!ppc_md.hpte_insert); + ret = ppc_md.hpte_insert(hpteg, va, paddr, + tmp_mode, HPTE_V_BOLTED, psize); + if (ret < 0) break; } From aa98c50dcb5d5b85d2a4c26d54fa1e3c31c11e4b Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 23 Jun 2006 18:17:32 +1000 Subject: [PATCH 12/43] [POWERPC] Make kexec_setup() a regular initcall There's no reason kexec_setup() needs to be called explicitly from setup_system(), it can just be a regular initcall. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/machine_kexec_64.c | 4 +++- arch/powerpc/kernel/setup_64.c | 4 ---- include/asm-powerpc/kexec.h | 1 - 3 files changed, 3 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index a8fa04ef27cd..b438d45a068c 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -378,11 +378,13 @@ static void __init export_crashk_values(void) of_node_put(node); } -void __init kexec_setup(void) +static int __init kexec_setup(void) { export_htab_values(); export_crashk_values(); + return 0; } +__initcall(kexec_setup); static int __init early_parse_crashk(char *p) { diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 6f213a9e36bf..cc26530145db 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -350,10 +350,6 @@ void __init setup_system(void) */ unflatten_device_tree(); -#ifdef CONFIG_KEXEC - kexec_setup(); /* requires unflattened device tree. */ -#endif - /* * Fill the ppc64_caches & systemcfg structures with informations * retrieved from the device-tree. Need to be called before diff --git a/include/asm-powerpc/kexec.h b/include/asm-powerpc/kexec.h index efe8872ec583..234bd684c7f0 100644 --- a/include/asm-powerpc/kexec.h +++ b/include/asm-powerpc/kexec.h @@ -112,7 +112,6 @@ static inline void crash_setup_regs(struct pt_regs *newregs, #ifdef __powerpc64__ extern void kexec_smp_wait(void); /* get and clear naca physid, wait for master to copy new code to 0 */ -extern void __init kexec_setup(void); extern int crashing_cpu; extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *)); #endif /* __powerpc64 __ */ From 4ba99b97dadd35b9ce1438b2bc7c992a4a14a8b1 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 23 Jun 2006 18:20:09 +1000 Subject: [PATCH 13/43] [POWERPC] Setup the boot cpu's paca pointer in C rather than asm There's no need to set the boot cpu paca in asm, so do it in C so us mere mortals can understand it. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/head_64.S | 11 ----------- arch/powerpc/kernel/setup_64.c | 9 ++++++++- 2 files changed, 8 insertions(+), 12 deletions(-) diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index be5560a2e441..da0924293496 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -1976,17 +1976,6 @@ _STATIC(start_here_common) /* Not reached */ BUG_OPCODE -/* Put the paca pointer into r13 and SPRG3 */ -_GLOBAL(setup_boot_paca) - LOAD_REG_IMMEDIATE(r3, boot_cpuid) - lwz r3,0(r3) - LOAD_REG_IMMEDIATE(r4, paca) /* Get base vaddr of paca array */ - mulli r3,r3,PACA_SIZE /* Calculate vaddr of right paca */ - add r13,r3,r4 /* for this processor. */ - mtspr SPRN_SPRG3,r13 - - blr - /* * We put a few things here that have to be page-aligned. * This stuff goes at the beginning of the bss, which is page-aligned. diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index cc26530145db..a2fb2e627aad 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -149,6 +149,13 @@ early_param("smt-enabled", early_smt_enabled); #define check_smt_enabled() #endif /* CONFIG_SMP */ +/* Put the paca pointer into r13 and SPRG3 */ +void __init setup_paca(int cpu) +{ + local_paca = &paca[cpu]; + mtspr(SPRN_SPRG3, local_paca); +} + /* * Early initialization entry point. This is called by head.S * with MMU translation disabled. We rely on the "feature" of @@ -183,7 +190,7 @@ void __init early_setup(unsigned long dt_ptr) early_init_devtree(__va(dt_ptr)); /* Now we know the logical id of our boot cpu, setup the paca. */ - setup_boot_paca(); + setup_paca(boot_cpuid); /* Fix up paca fields required for the boot cpu */ get_paca()->cpu_start = 1; From 24da3dd53430ec07ce9110b1eaaad080c3c7ecf6 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 23 Jun 2006 18:20:10 +1000 Subject: [PATCH 14/43] [POWERPC] Make rtas_call() safe if RTAS hasn't been initialised Currently it's unsafe to call rtas_call() prior to rtas_initialize(). This is because the rtas.entry value hasn't been setup and so we don't know where to enter, but we just try anyway. We can't do anything intelligent without rtas.entry, so if it's not set, just return. Code that calls rtas_call() early needs to be aware that the call might fail. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/rtas.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 17dc79198515..0f14c2e63a67 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -328,7 +328,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...) char *buff_copy = NULL; int ret; - if (token == RTAS_UNKNOWN_SERVICE) + if (!rtas.entry || token == RTAS_UNKNOWN_SERVICE) return -1; /* Gotta do something different here, use global lock for now... */ From ab3ab74d9b6b3920be70f502b40cb3f7f08d23fa Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 23 Jun 2006 18:20:11 +1000 Subject: [PATCH 15/43] [POWERPC] Move RTAS exports next to their declarations Move RTAS exports next to their declarations. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/rtas.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 0f14c2e63a67..b6aed765966a 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -38,16 +38,19 @@ struct rtas_t rtas = { .lock = SPIN_LOCK_UNLOCKED }; +EXPORT_SYMBOL(rtas); struct rtas_suspend_me_data { long waiting; struct rtas_args *args; }; -EXPORT_SYMBOL(rtas); - DEFINE_SPINLOCK(rtas_data_buf_lock); +EXPORT_SYMBOL(rtas_data_buf_lock); + char rtas_data_buf[RTAS_DATA_BUF_SIZE] __cacheline_aligned; +EXPORT_SYMBOL(rtas_data_buf); + unsigned long rtas_rmo_buf; /* @@ -236,6 +239,7 @@ int rtas_token(const char *service) tokp = (int *) get_property(rtas.dev, service, NULL); return tokp ? *tokp : RTAS_UNKNOWN_SERVICE; } +EXPORT_SYMBOL(rtas_token); #ifdef CONFIG_RTAS_ERROR_LOGGING /* @@ -369,6 +373,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...) } return ret; } +EXPORT_SYMBOL(rtas_call); /* For RTAS_BUSY (-2), delay for 1 millisecond. For an extended busy status * code of 990n, perform the hinted delay of 10^n (last digit) milliseconds. @@ -388,6 +393,7 @@ unsigned int rtas_busy_delay_time(int status) return ms; } +EXPORT_SYMBOL(rtas_busy_delay_time); /* For an RTAS busy status code, perform the hinted delay. */ unsigned int rtas_busy_delay(int status) @@ -401,6 +407,7 @@ unsigned int rtas_busy_delay(int status) return ms; } +EXPORT_SYMBOL(rtas_busy_delay); int rtas_error_rc(int rtas_rc) { @@ -446,6 +453,7 @@ int rtas_get_power_level(int powerdomain, int *level) return rtas_error_rc(rc); return rc; } +EXPORT_SYMBOL(rtas_get_power_level); int rtas_set_power_level(int powerdomain, int level, int *setlevel) { @@ -463,6 +471,7 @@ int rtas_set_power_level(int powerdomain, int level, int *setlevel) return rtas_error_rc(rc); return rc; } +EXPORT_SYMBOL(rtas_set_power_level); int rtas_get_sensor(int sensor, int index, int *state) { @@ -480,6 +489,7 @@ int rtas_get_sensor(int sensor, int index, int *state) return rtas_error_rc(rc); return rc; } +EXPORT_SYMBOL(rtas_get_sensor); int rtas_set_indicator(int indicator, int index, int new_value) { @@ -497,6 +507,7 @@ int rtas_set_indicator(int indicator, int index, int new_value) return rtas_error_rc(rc); return rc; } +EXPORT_SYMBOL(rtas_set_indicator); void rtas_restart(char *cmd) { @@ -790,15 +801,3 @@ void __init rtas_initialize(void) rtas_last_error_token = rtas_token("rtas-last-error"); #endif } - - -EXPORT_SYMBOL(rtas_token); -EXPORT_SYMBOL(rtas_call); -EXPORT_SYMBOL(rtas_data_buf); -EXPORT_SYMBOL(rtas_data_buf_lock); -EXPORT_SYMBOL(rtas_busy_delay_time); -EXPORT_SYMBOL(rtas_busy_delay); -EXPORT_SYMBOL(rtas_get_sensor); -EXPORT_SYMBOL(rtas_get_power_level); -EXPORT_SYMBOL(rtas_set_power_level); -EXPORT_SYMBOL(rtas_set_indicator); From 458148c00b97864a27ecf528a1d45a8e5ebd9bbc Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 23 Jun 2006 18:20:13 +1000 Subject: [PATCH 16/43] [POWERPC] Setup RTAS values earlier, to enable rtas_call() earlier Althought RTAS is instantiated when we enter the kernel, we can't actually call into it until we know its entry point address. Currently we grab that in rtas_initialize(), however that's quite late in the boot sequence. To enable rtas_call() earlier, we can grab the RTAS entry etc. values while we're scanning the flattened device tree. There's existing code to retrieve the values from /chosen, however we don't store them there anymore, so remove that code. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom.c | 23 +++++------------------ arch/powerpc/kernel/rtas.c | 22 ++++++++++++++++++++++ include/asm-powerpc/rtas.h | 3 +++ 3 files changed, 30 insertions(+), 18 deletions(-) diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index efed4bc2b454..ce02c056ac3f 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -1125,24 +1125,6 @@ static int __init early_init_dt_scan_chosen(unsigned long node, tce_alloc_end = *lprop; #endif -#ifdef CONFIG_PPC_RTAS - /* To help early debugging via the front panel, we retrieve a minimal - * set of RTAS infos now if available - */ - { - u64 *basep, *entryp, *sizep; - - basep = of_get_flat_dt_prop(node, "linux,rtas-base", NULL); - entryp = of_get_flat_dt_prop(node, "linux,rtas-entry", NULL); - sizep = of_get_flat_dt_prop(node, "linux,rtas-size", NULL); - if (basep && entryp && sizep) { - rtas.base = *basep; - rtas.entry = *entryp; - rtas.size = *sizep; - } - } -#endif /* CONFIG_PPC_RTAS */ - #ifdef CONFIG_KEXEC lprop = (u64*)of_get_flat_dt_prop(node, "linux,crashkernel-base", NULL); if (lprop) @@ -1327,6 +1309,11 @@ void __init early_init_devtree(void *params) /* Setup flat device-tree pointer */ initial_boot_params = params; +#ifdef CONFIG_PPC_RTAS + /* Some machines might need RTAS info for debugging, grab it now. */ + of_scan_flat_dt(early_init_dt_scan_rtas, NULL); +#endif + /* Retrieve various informations from the /chosen node of the * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index b6aed765966a..061d8afd246e 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -801,3 +801,25 @@ void __init rtas_initialize(void) rtas_last_error_token = rtas_token("rtas-last-error"); #endif } + +int __init early_init_dt_scan_rtas(unsigned long node, + const char *uname, int depth, void *data) +{ + u32 *basep, *entryp, *sizep; + + if (depth != 1 || strcmp(uname, "rtas") != 0) + return 0; + + basep = of_get_flat_dt_prop(node, "linux,rtas-base", NULL); + entryp = of_get_flat_dt_prop(node, "linux,rtas-entry", NULL); + sizep = of_get_flat_dt_prop(node, "rtas-size", NULL); + + if (basep && entryp && sizep) { + rtas.base = *basep; + rtas.entry = *entryp; + rtas.size = *sizep; + } + + /* break now */ + return 1; +} diff --git a/include/asm-powerpc/rtas.h b/include/asm-powerpc/rtas.h index 02e213e3d69f..a33c6acffa61 100644 --- a/include/asm-powerpc/rtas.h +++ b/include/asm-powerpc/rtas.h @@ -181,6 +181,9 @@ extern int rtas_set_rtc_time(struct rtc_time *rtc_time); extern unsigned int rtas_busy_delay_time(int status); extern unsigned int rtas_busy_delay(int status); +extern int early_init_dt_scan_rtas(unsigned long node, + const char *uname, int depth, void *data); + extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal); /* Error types logged. */ From cc46bb98c0d52695f26c239de701050660f5c79f Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 23 Jun 2006 18:20:16 +1000 Subject: [PATCH 17/43] [POWERPC] Add udbg support for RTAS console Add udbg hooks for the RTAS console, based on the RTAS put-term-char and get-term-char calls. Along with my previous patches, this should enable debugging as soon as early_init_dt_scan_rtas() is called. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 4 +++ arch/powerpc/Kconfig.debug | 9 ++++- arch/powerpc/kernel/rtas.c | 72 +++++++++++++++++++++++++++++++++++++- arch/powerpc/kernel/udbg.c | 7 ++-- include/asm-powerpc/udbg.h | 3 +- 5 files changed, 90 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index c5e01c4b637d..deea4c8e1f4e 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -420,6 +420,10 @@ config PPC_IBM_CELL_BLADE select MMIO_NVRAM select PPC_UDBG_16550 +config UDBG_RTAS_CONSOLE + bool + default n + config XICS depends on PPC_PSERIES bool diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index c69006ae8246..e29ef77d3b00 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -134,12 +134,19 @@ config PPC_EARLY_DEBUG_G5 help Select this to enable early debugging for Apple G5 machines. -config PPC_EARLY_DEBUG_RTAS +config PPC_EARLY_DEBUG_RTAS_PANEL bool "RTAS Panel" depends on PPC_RTAS help Select this to enable early debugging via the RTAS panel. +config PPC_EARLY_DEBUG_RTAS_CONSOLE + bool "RTAS Console" + depends on PPC_RTAS + select UDBG_RTAS_CONSOLE + help + Select this to enable early debugging via the RTAS console. + config PPC_EARLY_DEBUG_MAPLE bool "Maple real mode" depends on PPC_MAPLE diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 061d8afd246e..4a4cb5598402 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -109,11 +109,71 @@ static void call_rtas_display_status_delay(char c) } } -void __init udbg_init_rtas(void) +void __init udbg_init_rtas_panel(void) { udbg_putc = call_rtas_display_status_delay; } +#ifdef CONFIG_UDBG_RTAS_CONSOLE + +/* If you think you're dying before early_init_dt_scan_rtas() does its + * work, you can hard code the token values for your firmware here and + * hardcode rtas.base/entry etc. + */ +static unsigned int rtas_putchar_token = RTAS_UNKNOWN_SERVICE; +static unsigned int rtas_getchar_token = RTAS_UNKNOWN_SERVICE; + +static void udbg_rtascon_putc(char c) +{ + int tries; + + if (!rtas.base) + return; + + /* Add CRs before LFs */ + if (c == '\n') + udbg_rtascon_putc('\r'); + + /* if there is more than one character to be displayed, wait a bit */ + for (tries = 0; tries < 16; tries++) { + if (rtas_call(rtas_putchar_token, 1, 1, NULL, c) == 0) + break; + udelay(1000); + } +} + +static int udbg_rtascon_getc_poll(void) +{ + int c; + + if (!rtas.base) + return -1; + + if (rtas_call(rtas_getchar_token, 0, 2, &c)) + return -1; + + return c; +} + +static int udbg_rtascon_getc(void) +{ + int c; + + while ((c = udbg_rtascon_getc_poll()) == -1) + ; + + return c; +} + + +void __init udbg_init_rtas_console(void) +{ + udbg_putc = udbg_rtascon_putc; + udbg_getc = udbg_rtascon_getc; + udbg_getc_poll = udbg_rtascon_getc_poll; +} +#endif /* CONFIG_UDBG_RTAS_CONSOLE */ + void rtas_progress(char *s, unsigned short hex) { struct device_node *root; @@ -820,6 +880,16 @@ int __init early_init_dt_scan_rtas(unsigned long node, rtas.size = *sizep; } +#ifdef CONFIG_UDBG_RTAS_CONSOLE + basep = of_get_flat_dt_prop(node, "put-term-char", NULL); + if (basep) + rtas_putchar_token = *basep; + + basep = of_get_flat_dt_prop(node, "get-term-char", NULL); + if (basep) + rtas_getchar_token = *basep; +#endif + /* break now */ return 1; } diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 67d9fd9ae2b5..759afd5e0d8a 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -34,9 +34,12 @@ void __init udbg_early_init(void) #elif defined(CONFIG_PPC_EARLY_DEBUG_G5) /* For use on Apple G5 machines */ udbg_init_pmac_realmode(); -#elif defined(CONFIG_PPC_EARLY_DEBUG_RTAS) +#elif defined(CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL) /* RTAS panel debug */ - udbg_init_rtas(); + udbg_init_rtas_panel(); +#elif defined(CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE) + /* RTAS console debug */ + udbg_init_rtas_console(); #elif defined(CONFIG_PPC_EARLY_DEBUG_MAPLE) /* Maple real mode debug */ udbg_init_maple_realmode(); diff --git a/include/asm-powerpc/udbg.h b/include/asm-powerpc/udbg.h index 19a1517ac43b..55e57844fa78 100644 --- a/include/asm-powerpc/udbg.h +++ b/include/asm-powerpc/udbg.h @@ -42,7 +42,8 @@ extern void __init udbg_init_debug_lpar(void); extern void __init udbg_init_pmac_realmode(void); extern void __init udbg_init_maple_realmode(void); extern void __init udbg_init_iseries(void); -extern void __init udbg_init_rtas(void); +extern void __init udbg_init_rtas_panel(void); +extern void __init udbg_init_rtas_console(void); #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_UDBG_H */ From 94b60ec166bc410d544d7635c9575ea5e53ec052 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 23 Jun 2006 18:20:22 +1000 Subject: [PATCH 18/43] [POWERPC] Enable the RTAS udbg console on IBM Cell Blade Enable the RTAS udbg console on IBM Cell Blade, this allows xmon to work. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 1 + arch/powerpc/platforms/cell/setup.c | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index deea4c8e1f4e..4f4071a7bdfb 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -419,6 +419,7 @@ config PPC_IBM_CELL_BLADE select PPC_RTAS select MMIO_NVRAM select PPC_UDBG_16550 + select UDBG_RTAS_CONSOLE config UDBG_RTAS_CONSOLE bool diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index 2436eaab701d..00d112f92272 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -141,6 +141,10 @@ static int __init cell_probe(void) !of_flat_dt_is_compatible(root, "IBM,CPBW-1.0")) return 0; +#ifdef CONFIG_UDBG_RTAS_CONSOLE + udbg_init_rtas_console(); +#endif + hpte_init_native(); return 1; From 6b7290be0c045f3978c6b12f0a8aedd21ca6fa9c Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 23 Jun 2006 18:20:24 +1000 Subject: [PATCH 19/43] [POWERPC] Enable XMON in cell_defconfig Now that we have the udbg callbacks we can enable XMON by default. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/configs/cell_defconfig | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index b8b8d4675dc0..e028a2ecb8a3 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17 -# Mon Jun 19 17:23:03 2006 +# Linux kernel version: 2.6.17-rc6 +# Thu Jun 22 15:28:36 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -1063,7 +1063,8 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUGGER=y -# CONFIG_XMON is not set +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y CONFIG_IRQSTACKS=y # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set From 23cc770107c2d27dd1f5dee53177ea1163ee9295 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 23 Jun 2006 20:57:47 +0200 Subject: [PATCH 20/43] [POWERPC] spufs: map mmio space as guarded into user space This fixes a bug where we don't properly map SPE MMIO space as guarded, causing various test cases to fail, probably due to write combining and other niceties caused by the lack of the G bit. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/file.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 7854a380dce2..58e794f9da1b 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -204,7 +204,7 @@ static int spufs_cntl_mmap(struct file *file, struct vm_area_struct *vma) vma->vm_flags |= VM_RESERVED; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) - | _PAGE_NO_CACHE); + | _PAGE_NO_CACHE | _PAGE_GUARDED); vma->vm_ops = &spufs_cntl_mmap_vmops; return 0; @@ -675,7 +675,7 @@ static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma) vma->vm_flags |= VM_RESERVED; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) - | _PAGE_NO_CACHE); + | _PAGE_NO_CACHE | _PAGE_GUARDED); vma->vm_ops = &spufs_signal1_mmap_vmops; return 0; @@ -762,7 +762,7 @@ static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma) /* FIXME: */ vma->vm_flags |= VM_RESERVED; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) - | _PAGE_NO_CACHE); + | _PAGE_NO_CACHE | _PAGE_GUARDED); vma->vm_ops = &spufs_signal2_mmap_vmops; return 0; @@ -850,7 +850,7 @@ static int spufs_mss_mmap(struct file *file, struct vm_area_struct *vma) vma->vm_flags |= VM_RESERVED; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) - | _PAGE_NO_CACHE); + | _PAGE_NO_CACHE | _PAGE_GUARDED); vma->vm_ops = &spufs_mss_mmap_vmops; return 0; @@ -899,7 +899,7 @@ static int spufs_mfc_mmap(struct file *file, struct vm_area_struct *vma) vma->vm_flags |= VM_RESERVED; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) - | _PAGE_NO_CACHE); + | _PAGE_NO_CACHE | _PAGE_GUARDED); vma->vm_ops = &spufs_mfc_mmap_vmops; return 0; From 910ab66b1c94a2758725874d389136cf9acdc04c Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 23 Jun 2006 20:57:48 +0200 Subject: [PATCH 21/43] [POWERPC] spufs: fix MFC command queue purge In the context save/restore code, the SPU MFC command queue purge code has a bug: static inline void wait_purge_complete(struct spu_state *csa, struct spu *spu) { struct spu_priv2 __iomem *priv2 = spu->priv2; /* Save, Step 28: * Poll MFC_CNTL[Ps] until value '11' is * read * (purge complete). */ POLL_WHILE_FALSE(in_be64(&priv2->mfc_control_RW) & MFC_CNTL_PURGE_DMA_COMPLETE); } This will exit as soon as _one_ of the 2 bits that compose MFC_CNTL_PURGE_DMA_COMPLETE is set, and one of them happens to be "purge in progress"... which means that we'll happily continue restoring the MFC while it's being purged at the same time. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/switch.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c index 3068b429b031..015a51787009 100644 --- a/arch/powerpc/platforms/cell/spufs/switch.c +++ b/arch/powerpc/platforms/cell/spufs/switch.c @@ -464,7 +464,8 @@ static inline void wait_purge_complete(struct spu_state *csa, struct spu *spu) * Poll MFC_CNTL[Ps] until value '11' is read * (purge complete). */ - POLL_WHILE_FALSE(in_be64(&priv2->mfc_control_RW) & + POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) & + MFC_CNTL_PURGE_DMA_STATUS_MASK) == MFC_CNTL_PURGE_DMA_COMPLETE); } @@ -1028,7 +1029,8 @@ static inline void wait_suspend_mfc_complete(struct spu_state *csa, * Restore, Step 47. * Poll MFC_CNTL[Ss] until 11 is returned. */ - POLL_WHILE_FALSE(in_be64(&priv2->mfc_control_RW) & + POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) & + MFC_CNTL_SUSPEND_DMA_STATUS_MASK) == MFC_CNTL_SUSPEND_COMPLETE); } From 4da30d15b6d5036b0d96422d6946ca758111fae3 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 23 Jun 2006 20:57:49 +0200 Subject: [PATCH 22/43] [POWERPC] spufs: fix memory hotplug dependency spufs_base.c calls __add_pages, which depends on CONFIG_MEMORY_HOTPLUG. Moved the selection of CONFIG_MEMORY_HOTPLUG from CONFIG_SPUFS_MMAP to CONFIG_SPU_FS. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 352bbbacde9a..0c8c7b6ab897 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -6,6 +6,7 @@ config SPU_FS default m depends on PPC_CELL select SPU_BASE + select MEMORY_HOTPLUG help The SPU file system is used to access Synergistic Processing Units on machines implementing the Broadband Processor @@ -18,7 +19,6 @@ config SPU_BASE config SPUFS_MMAP bool depends on SPU_FS && SPARSEMEM - select MEMORY_HOTPLUG default y config CBE_RAS From 2cd90bc8fba8720ef7f3fdfd1e0c1a5397a18271 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 23 Jun 2006 20:57:50 +0200 Subject: [PATCH 23/43] [POWERPC] spufs: fix class0 interrupt assignment The class zero interrupt handling for spus was confusing alignment and error interrupts, so swap them. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spu_base.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index db82f503ba2c..b306723abb87 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -168,12 +168,12 @@ spu_irq_class_0_bottom(struct spu *spu) stat &= mask; - if (stat & 1) /* invalid MFC DMA */ - __spu_trap_invalid_dma(spu); - - if (stat & 2) /* invalid DMA alignment */ + if (stat & 1) /* invalid DMA alignment */ __spu_trap_dma_align(spu); + if (stat & 2) /* invalid MFC DMA */ + __spu_trap_invalid_dma(spu); + if (stat & 4) /* error on SPU */ __spu_trap_error(spu); From c0ce7d0886cf0c2579c604eac41a7e125bc0e96d Mon Sep 17 00:00:00 2001 From: David Wilder Date: Fri, 23 Jun 2006 15:29:34 -0700 Subject: [PATCH 24/43] [POWERPC] Add the use of the firmware soft-reset-nmi to kdump. With this patch, kdump uses the firmware soft-reset NMI for two purposes: 1) Initiate the kdump (take a crash dump) by issuing a soft-reset. 2) Break a CPU out of a deadlock condition that is detected during kdump processing. When a soft-reset is initiated each CPU will enter system_reset_exception() and set its corresponding bit in the global bit-array cpus_in_sr then call die(). When die() finds the CPU's bit set in cpu_in_sr crash_kexec() is called to initiate a crash dump. The first CPU to enter crash_kexec() is called the "crashing CPU". All other CPUs are "secondary CPUs". The secondary CPU's pass through to crash_kexec_secondary() and sleep. The crashing CPU waits for all CPUs to enter via soft-reset then boots the kdump kernel (see crash_soft_reset_check()) When the system crashes due to a panic or exception, crash_kexec() is called by panic() or die(). The crashing CPU sends an IPI to all other CPUs to notify them of the pending shutdown. If a CPU is in a deadlock or hung state with interrupts disabled, the IPI will not be delivered. The result being, that the kdump kernel is not booted. This problem is solved with the use of a firmware generated soft-reset. After the crashing_cpu has issued the IPI, it waits for 10 sec for all CPUs to enter crash_ipi_callback(). A CPU signifies its entry to crash_ipi_callback() by setting its corresponding bit in the cpus_in_crash bit array. After 10 sec, if one or more CPUs have not set their bit in cpus_in_crash we assume that the CPU(s) is deadlocked. The operator is then prompted to generate a soft-reset to break the deadlock. Each CPU enters the soft reset handler as described above. Two conditions must be handled at this point: 1) The system crashed because the operator generated a soft-reset. See 2) The system had crashed before the soft-reset was generated ( in the case of a Panic or oops). The first CPU to enter crash_kexec() uses the state of the kexec_lock to determine this state. If kexec_lock is already held then condition 2 is true and crash_kexec_secondary() is called, else; this CPU is flagged as the crashing CPU, the kexec_lock is acquired and crash_kexec() proceeds as described above. Each additional CPUs responding to the soft-reset will pass through crash_kexec() to kexec_secondary(). All secondary CPUs call crash_ipi_callback() readying them self's for the shutdown. When ready they clear their bit in cpus_in_sr. The crashing CPU waits in kexec_secondary() until all other CPUs have cleared their bits in cpus_in_sr. The kexec kernel boot is then started. Signed-off-by: Haren Myneni Signed-off-by: David Wilder Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/crash.c | 147 +++++++++++++++++++++++++++++------- arch/powerpc/kernel/traps.c | 29 ++++--- include/asm-powerpc/kexec.h | 8 ++ kernel/kexec.c | 6 +- 4 files changed, 143 insertions(+), 47 deletions(-) diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index e253a45dcf10..b537cfa4e09b 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -24,9 +24,11 @@ #include #include #include +#include #include #include +#include #include #include #include @@ -41,6 +43,7 @@ /* This keeps a track of which one is crashing cpu. */ int crashing_cpu = -1; +static cpumask_t cpus_in_crash = CPU_MASK_NONE; static u32 *append_elf_note(u32 *buf, char *name, unsigned type, void *data, size_t data_len) @@ -98,34 +101,66 @@ static void crash_save_this_cpu(struct pt_regs *regs, int cpu) } #ifdef CONFIG_SMP -static atomic_t waiting_for_crash_ipi; +static atomic_t enter_on_soft_reset = ATOMIC_INIT(0); void crash_ipi_callback(struct pt_regs *regs) { int cpu = smp_processor_id(); - if (cpu == crashing_cpu) - return; - if (!cpu_online(cpu)) return; + local_irq_disable(); + if (!cpu_isset(cpu, cpus_in_crash)) + crash_save_this_cpu(regs, cpu); + cpu_set(cpu, cpus_in_crash); + + /* + * Entered via soft-reset - could be the kdump + * process is invoked using soft-reset or user activated + * it if some CPU did not respond to an IPI. + * For soft-reset, the secondary CPU can enter this func + * twice. 1 - using IPI, and 2. soft-reset. + * Tell the kexec CPU that entered via soft-reset and ready + * to go down. + */ + if (cpu_isset(cpu, cpus_in_sr)) { + cpu_clear(cpu, cpus_in_sr); + atomic_inc(&enter_on_soft_reset); + } + + /* + * Starting the kdump boot. + * This barrier is needed to make sure that all CPUs are stopped. + * If not, soft-reset will be invoked to bring other CPUs. + */ + while (!cpu_isset(crashing_cpu, cpus_in_crash)) + cpu_relax(); + if (ppc_md.kexec_cpu_down) ppc_md.kexec_cpu_down(1, 1); - - local_irq_disable(); - - crash_save_this_cpu(regs, cpu); - atomic_dec(&waiting_for_crash_ipi); kexec_smp_wait(); /* NOTREACHED */ } -static void crash_kexec_prepare_cpus(void) +/* + * Wait until all CPUs are entered via soft-reset. + */ +static void crash_soft_reset_check(int cpu) +{ + unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */ + + cpu_clear(cpu, cpus_in_sr); + while (atomic_read(&enter_on_soft_reset) != ncpus) + cpu_relax(); +} + + +static void crash_kexec_prepare_cpus(int cpu) { unsigned int msecs; - atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1); + unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */ crash_send_ipi(crash_ipi_callback); smp_wmb(); @@ -133,14 +168,13 @@ static void crash_kexec_prepare_cpus(void) /* * FIXME: Until we will have the way to stop other CPUSs reliabally, * the crash CPU will send an IPI and wait for other CPUs to - * respond. If not, proceed the kexec boot even though we failed to - * capture other CPU states. + * respond. * Delay of at least 10 seconds. */ - printk(KERN_ALERT "Sending IPI to other cpus...\n"); + printk(KERN_EMERG "Sending IPI to other cpus...\n"); msecs = 10000; - while ((atomic_read(&waiting_for_crash_ipi) > 0) && (--msecs > 0)) { - barrier(); + while ((cpus_weight(cpus_in_crash) < ncpus) && (--msecs > 0)) { + cpu_relax(); mdelay(1); } @@ -149,18 +183,71 @@ static void crash_kexec_prepare_cpus(void) /* * FIXME: In case if we do not get all CPUs, one possibility: ask the * user to do soft reset such that we get all. - * IPI handler is already set by the panic cpu initially. Therefore, - * all cpus could invoke this handler from die() and the panic CPU - * will call machine_kexec() directly from this handler to do - * kexec boot. + * Soft-reset will be used until better mechanism is implemented. */ - if (atomic_read(&waiting_for_crash_ipi)) - printk(KERN_ALERT "done waiting: %d cpus not responding\n", - atomic_read(&waiting_for_crash_ipi)); + if (cpus_weight(cpus_in_crash) < ncpus) { + printk(KERN_EMERG "done waiting: %d cpu(s) not responding\n", + ncpus - cpus_weight(cpus_in_crash)); + printk(KERN_EMERG "Activate soft-reset to stop other cpu(s)\n"); + cpus_in_sr = CPU_MASK_NONE; + atomic_set(&enter_on_soft_reset, 0); + while (cpus_weight(cpus_in_crash) < ncpus) + cpu_relax(); + } + /* + * Make sure all CPUs are entered via soft-reset if the kdump is + * invoked using soft-reset. + */ + if (cpu_isset(cpu, cpus_in_sr)) + crash_soft_reset_check(cpu); /* Leave the IPI callback set */ } + +/* + * This function will be called by secondary cpus or by kexec cpu + * if soft-reset is activated to stop some CPUs. + */ +void crash_kexec_secondary(struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + unsigned long flags; + int msecs = 5; + + local_irq_save(flags); + /* Wait 5ms if the kexec CPU is not entered yet. */ + while (crashing_cpu < 0) { + if (--msecs < 0) { + /* + * Either kdump image is not loaded or + * kdump process is not started - Probably xmon + * exited using 'x'(exit and recover) or + * kexec_should_crash() failed for all running tasks. + */ + cpu_clear(cpu, cpus_in_sr); + local_irq_restore(flags); + return; + } + mdelay(1); + cpu_relax(); + } + if (cpu == crashing_cpu) { + /* + * Panic CPU will enter this func only via soft-reset. + * Wait until all secondary CPUs entered and + * then start kexec boot. + */ + crash_soft_reset_check(cpu); + cpu_set(crashing_cpu, cpus_in_crash); + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(1, 0); + machine_kexec(kexec_crash_image); + /* NOTREACHED */ + } + crash_ipi_callback(regs); +} + #else -static void crash_kexec_prepare_cpus(void) +static void crash_kexec_prepare_cpus(int cpu) { /* * move the secondarys to us so that we can copy @@ -171,6 +258,10 @@ static void crash_kexec_prepare_cpus(void) smp_release_cpus(); } +void crash_kexec_secondary(struct pt_regs *regs) +{ + cpus_in_sr = CPU_MASK_NONE; +} #endif void default_machine_crash_shutdown(struct pt_regs *regs) @@ -199,14 +290,14 @@ void default_machine_crash_shutdown(struct pt_regs *regs) desc->handler->disable(irq); } - if (ppc_md.kexec_cpu_down) - ppc_md.kexec_cpu_down(1, 0); - /* * Make a note of crashing cpu. Will be used in machine_kexec * such that another IPI will not be sent. */ crashing_cpu = smp_processor_id(); - crash_kexec_prepare_cpus(); crash_save_this_cpu(regs, crashing_cpu); + crash_kexec_prepare_cpus(crashing_cpu); + cpu_set(crashing_cpu, cpus_in_crash); + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(1, 0); } diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 52f5659534f4..fa6bd97b6b9d 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -52,9 +52,13 @@ #include #include #endif +#include #ifdef CONFIG_PPC64 /* XXX */ #define _IO_BASE pci_io_base +#ifdef CONFIG_KEXEC +cpumask_t cpus_in_sr = CPU_MASK_NONE; +#endif #endif #ifdef CONFIG_DEBUGGER @@ -97,7 +101,7 @@ static DEFINE_SPINLOCK(die_lock); int die(const char *str, struct pt_regs *regs, long err) { - static int die_counter, crash_dump_start = 0; + static int die_counter; if (debugger(regs)) return 1; @@ -137,21 +141,12 @@ int die(const char *str, struct pt_regs *regs, long err) print_modules(); show_regs(regs); bust_spinlocks(0); - - if (!crash_dump_start && kexec_should_crash(current)) { - crash_dump_start = 1; - spin_unlock_irq(&die_lock); - crash_kexec(regs); - /* NOTREACHED */ - } spin_unlock_irq(&die_lock); - if (crash_dump_start) - /* - * Only for soft-reset: Other CPUs will be responded to an IPI - * sent by first kexec CPU. - */ - for(;;) - ; + + if (kexec_should_crash(current) || + kexec_sr_activated(smp_processor_id())) + crash_kexec(regs); + crash_kexec_secondary(regs); if (in_interrupt()) panic("Fatal exception in interrupt"); @@ -215,6 +210,10 @@ void system_reset_exception(struct pt_regs *regs) return; } +#ifdef CONFIG_KEXEC + cpu_set(smp_processor_id(), cpus_in_sr); +#endif + die("System Reset", regs, SIGABRT); /* Must die if the interrupt is not recoverable */ diff --git a/include/asm-powerpc/kexec.h b/include/asm-powerpc/kexec.h index 234bd684c7f0..8f7fd5cfec34 100644 --- a/include/asm-powerpc/kexec.h +++ b/include/asm-powerpc/kexec.h @@ -114,6 +114,11 @@ extern void kexec_smp_wait(void); /* get and clear naca physid, wait for master to copy new code to 0 */ extern int crashing_cpu; extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *)); +extern cpumask_t cpus_in_sr; +static inline int kexec_sr_activated(int cpu) +{ + return cpu_isset(cpu,cpus_in_sr); +} #endif /* __powerpc64 __ */ struct kimage; @@ -123,10 +128,13 @@ extern int default_machine_kexec_prepare(struct kimage *image); extern void default_machine_crash_shutdown(struct pt_regs *regs); extern void machine_kexec_simple(struct kimage *image); +extern void crash_kexec_secondary(struct pt_regs *regs); extern int overlaps_crashkernel(unsigned long start, unsigned long size); extern void reserve_crashkernel(void); #else /* !CONFIG_KEXEC */ +static inline int kexec_sr_activated(int cpu) { return 0; } +static inline void crash_kexec_secondary(struct pt_regs *regs) { } static inline int overlaps_crashkernel(unsigned long start, unsigned long size) { diff --git a/kernel/kexec.c b/kernel/kexec.c index 58f0f382597c..50087ecf337e 100644 --- a/kernel/kexec.c +++ b/kernel/kexec.c @@ -1042,7 +1042,6 @@ asmlinkage long compat_sys_kexec_load(unsigned long entry, void crash_kexec(struct pt_regs *regs) { - struct kimage *image; int locked; @@ -1056,12 +1055,11 @@ void crash_kexec(struct pt_regs *regs) */ locked = xchg(&kexec_lock, 1); if (!locked) { - image = xchg(&kexec_crash_image, NULL); - if (image) { + if (kexec_crash_image) { struct pt_regs fixed_regs; crash_setup_regs(&fixed_regs, regs); machine_crash_shutdown(&fixed_regs); - machine_kexec(image); + machine_kexec(kexec_crash_image); } xchg(&kexec_lock, 0); } From d0b79c54fc14f1f2db64180a21b84146028c598b Mon Sep 17 00:00:00 2001 From: Jimi Xenidis Date: Mon, 26 Jun 2006 04:56:58 -0400 Subject: [PATCH 25/43] [POWERPC] Skip the "copy down" of the kernel if it is already at zero. This patch allows the kernel to recognized that it was loaded at zero and the copy down of the image is unnecessary. This is useful for Simulators and kexec models. On a typical 3.8 MiB vmlinux.strip this saves about 2.3 million instructions. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/head_64.S | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index da0924293496..f2fab687a01c 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -1664,6 +1664,9 @@ _STATIC(__after_prom_start) /* i.e. where we are running */ /* the source addr */ + cmpdi r4,0 /* In some cases the loader may */ + beq .start_here_multiplatform /* have already put us at zero */ + /* so we can skip the copy. */ LOAD_REG_IMMEDIATE(r5,copy_to_here) /* # bytes of memory to copy */ sub r5,r5,r27 From 612f02d6d6eadd9c5dde5a5b97b55a3a620d28e5 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 28 Jun 2006 11:49:10 +1000 Subject: [PATCH 26/43] [POWERPC] Clean up it_lp_queue.h No more StudlyCaps. Remove from a couple of places it is no longer needed. Use C style comments. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/paca.c | 1 - arch/powerpc/platforms/iseries/lpevents.c | 55 ++++++++++++----------- arch/powerpc/platforms/iseries/proc.c | 1 - include/asm-powerpc/iseries/it_lp_queue.h | 40 ++++++++--------- 4 files changed, 48 insertions(+), 49 deletions(-) diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index f505a8827e3e..a0bb354c1c08 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include diff --git a/arch/powerpc/platforms/iseries/lpevents.c b/arch/powerpc/platforms/iseries/lpevents.c index 8ca7b9396355..2a9f81ea27d6 100644 --- a/arch/powerpc/platforms/iseries/lpevents.c +++ b/arch/powerpc/platforms/iseries/lpevents.c @@ -51,20 +51,21 @@ static unsigned lpEventHandlerPaths[HvLpEvent_Type_NumTypes]; static struct HvLpEvent * get_next_hvlpevent(void) { struct HvLpEvent * event; - event = (struct HvLpEvent *)hvlpevent_queue.xSlicCurEventPtr; + event = (struct HvLpEvent *)hvlpevent_queue.hq_current_event; if (hvlpevent_is_valid(event)) { /* rmb() needed only for weakly consistent machines (regatta) */ rmb(); /* Set pointer to next potential event */ - hvlpevent_queue.xSlicCurEventPtr += ((event->xSizeMinus1 + - LpEventAlign) / LpEventAlign) * LpEventAlign; + hvlpevent_queue.hq_current_event += ((event->xSizeMinus1 + + IT_LP_EVENT_ALIGN) / IT_LP_EVENT_ALIGN) * + IT_LP_EVENT_ALIGN; /* Wrap to beginning if no room at end */ - if (hvlpevent_queue.xSlicCurEventPtr > - hvlpevent_queue.xSlicLastValidEventPtr) { - hvlpevent_queue.xSlicCurEventPtr = - hvlpevent_queue.xSlicEventStackPtr; + if (hvlpevent_queue.hq_current_event > + hvlpevent_queue.hq_last_event) { + hvlpevent_queue.hq_current_event = + hvlpevent_queue.hq_event_stack; } } else { event = NULL; @@ -82,10 +83,10 @@ int hvlpevent_is_pending(void) if (smp_processor_id() >= spread_lpevents) return 0; - next_event = (struct HvLpEvent *)hvlpevent_queue.xSlicCurEventPtr; + next_event = (struct HvLpEvent *)hvlpevent_queue.hq_current_event; return hvlpevent_is_valid(next_event) || - hvlpevent_queue.xPlicOverflowIntPending; + hvlpevent_queue.hq_overflow_pending; } static void hvlpevent_clear_valid(struct HvLpEvent * event) @@ -95,18 +96,18 @@ static void hvlpevent_clear_valid(struct HvLpEvent * event) * ie. on 64-byte boundaries. */ struct HvLpEvent *tmp; - unsigned extra = ((event->xSizeMinus1 + LpEventAlign) / - LpEventAlign) - 1; + unsigned extra = ((event->xSizeMinus1 + IT_LP_EVENT_ALIGN) / + IT_LP_EVENT_ALIGN) - 1; switch (extra) { case 3: - tmp = (struct HvLpEvent*)((char*)event + 3 * LpEventAlign); + tmp = (struct HvLpEvent*)((char*)event + 3 * IT_LP_EVENT_ALIGN); hvlpevent_invalidate(tmp); case 2: - tmp = (struct HvLpEvent*)((char*)event + 2 * LpEventAlign); + tmp = (struct HvLpEvent*)((char*)event + 2 * IT_LP_EVENT_ALIGN); hvlpevent_invalidate(tmp); case 1: - tmp = (struct HvLpEvent*)((char*)event + 1 * LpEventAlign); + tmp = (struct HvLpEvent*)((char*)event + 1 * IT_LP_EVENT_ALIGN); hvlpevent_invalidate(tmp); } @@ -120,7 +121,7 @@ void process_hvlpevents(struct pt_regs *regs) struct HvLpEvent * event; /* If we have recursed, just return */ - if (!spin_trylock(&hvlpevent_queue.lock)) + if (!spin_trylock(&hvlpevent_queue.hq_lock)) return; for (;;) { @@ -148,17 +149,17 @@ void process_hvlpevents(struct pt_regs *regs) printk(KERN_INFO "Unexpected Lp Event type=%d\n", event->xType ); hvlpevent_clear_valid(event); - } else if (hvlpevent_queue.xPlicOverflowIntPending) + } else if (hvlpevent_queue.hq_overflow_pending) /* * No more valid events. If overflow events are * pending process them */ - HvCallEvent_getOverflowLpEvents(hvlpevent_queue.xIndex); + HvCallEvent_getOverflowLpEvents(hvlpevent_queue.hq_index); else break; } - spin_unlock(&hvlpevent_queue.lock); + spin_unlock(&hvlpevent_queue.hq_lock); } static int set_spread_lpevents(char *str) @@ -184,20 +185,20 @@ void setup_hvlpevent_queue(void) { void *eventStack; - spin_lock_init(&hvlpevent_queue.lock); + spin_lock_init(&hvlpevent_queue.hq_lock); /* Allocate a page for the Event Stack. */ - eventStack = alloc_bootmem_pages(LpEventStackSize); - memset(eventStack, 0, LpEventStackSize); + eventStack = alloc_bootmem_pages(IT_LP_EVENT_STACK_SIZE); + memset(eventStack, 0, IT_LP_EVENT_STACK_SIZE); /* Invoke the hypervisor to initialize the event stack */ - HvCallEvent_setLpEventStack(0, eventStack, LpEventStackSize); + HvCallEvent_setLpEventStack(0, eventStack, IT_LP_EVENT_STACK_SIZE); - hvlpevent_queue.xSlicEventStackPtr = (char *)eventStack; - hvlpevent_queue.xSlicCurEventPtr = (char *)eventStack; - hvlpevent_queue.xSlicLastValidEventPtr = (char *)eventStack + - (LpEventStackSize - LpEventMaxSize); - hvlpevent_queue.xIndex = 0; + hvlpevent_queue.hq_event_stack = eventStack; + hvlpevent_queue.hq_current_event = eventStack; + hvlpevent_queue.hq_last_event = (char *)eventStack + + (IT_LP_EVENT_STACK_SIZE - IT_LP_EVENT_MAX_SIZE); + hvlpevent_queue.hq_index = 0; } /* Register a handler for an LpEvent type */ diff --git a/arch/powerpc/platforms/iseries/proc.c b/arch/powerpc/platforms/iseries/proc.c index e68b6b5fa89f..c241413629ac 100644 --- a/arch/powerpc/platforms/iseries/proc.c +++ b/arch/powerpc/platforms/iseries/proc.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include "processor_vpd.h" diff --git a/include/asm-powerpc/iseries/it_lp_queue.h b/include/asm-powerpc/iseries/it_lp_queue.h index b7c6fc12cce2..284c5a7db3ac 100644 --- a/include/asm-powerpc/iseries/it_lp_queue.h +++ b/include/asm-powerpc/iseries/it_lp_queue.h @@ -29,20 +29,20 @@ struct HvLpEvent; -#define ITMaxLpQueues 8 +#define IT_LP_MAX_QUEUES 8 -#define NotUsed 0 // Queue will not be used by PLIC -#define DedicatedIo 1 // Queue dedicated to IO processor specified -#define DedicatedLp 2 // Queue dedicated to LP specified -#define Shared 3 // Queue shared for both IO and LP +#define IT_LP_NOT_USED 0 /* Queue will not be used by PLIC */ +#define IT_LP_DEDICATED_IO 1 /* Queue dedicated to IO processor specified */ +#define IT_LP_DEDICATED_LP 2 /* Queue dedicated to LP specified */ +#define IT_LP_SHARED 3 /* Queue shared for both IO and LP */ -#define LpEventStackSize 4096 -#define LpEventMaxSize 256 -#define LpEventAlign 64 +#define IT_LP_EVENT_STACK_SIZE 4096 +#define IT_LP_EVENT_MAX_SIZE 256 +#define IT_LP_EVENT_ALIGN 64 struct hvlpevent_queue { /* - * The xSlicCurEventPtr is the pointer to the next event stack entry + * The hq_current_event is the pointer to the next event stack entry * that will become valid. The OS must peek at this entry to determine * if it is valid. PLIC will set the valid indicator as the very last * store into that entry. @@ -52,23 +52,23 @@ struct hvlpevent_queue { * location again. * * If the event stack fills and there are overflow events, then PLIC - * will set the xPlicOverflowIntPending flag in which case the OS will + * will set the hq_overflow_pending flag in which case the OS will * have to fetch the additional LP events once they have drained the * event stack. * * The first 16-bytes are known by both the OS and PLIC. The remainder * of the cache line is for use by the OS. */ - u8 xPlicOverflowIntPending;// 0x00 Overflow events are pending - u8 xPlicStatus; // 0x01 DedicatedIo or DedicatedLp or NotUsed - u16 xSlicLogicalProcIndex; // 0x02 Logical Proc Index for correlation - u8 xPlicRsvd[12]; // 0x04 - char *xSlicCurEventPtr; // 0x10 - char *xSlicLastValidEventPtr; // 0x18 - char *xSlicEventStackPtr; // 0x20 - u8 xIndex; // 0x28 unique sequential index. - u8 xSlicRsvd[3]; // 0x29-2b - spinlock_t lock; + u8 hq_overflow_pending; /* 0x00 Overflow events are pending */ + u8 hq_status; /* 0x01 DedicatedIo or DedicatedLp or NotUsed */ + u16 hq_proc_index; /* 0x02 Logical Proc Index for correlation */ + u8 hq_reserved1[12]; /* 0x04 */ + char *hq_current_event; /* 0x10 */ + char *hq_last_event; /* 0x18 */ + char *hq_event_stack; /* 0x20 */ + u8 hq_index; /* 0x28 unique sequential index. */ + u8 hq_reserved2[3]; /* 0x29-2b */ + spinlock_t hq_lock; }; extern struct hvlpevent_queue hvlpevent_queue; From 9b47569a9d410199aea6386917fd0662809c60be Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 28 Jun 2006 11:51:41 +1000 Subject: [PATCH 27/43] [POWERPC] update asm-powerpc/time.h If we ever build a combined kernel including iSeries, then this will be needed. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- include/asm-powerpc/time.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h index 4463148c659f..dcde4410348d 100644 --- a/include/asm-powerpc/time.h +++ b/include/asm-powerpc/time.h @@ -18,8 +18,9 @@ #include #include -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_ISERIES #include +#include #include #endif @@ -177,7 +178,8 @@ static inline void set_dec(int val) #ifdef CONFIG_PPC_ISERIES int cur_dec; - if (get_lppaca()->shared_proc) { + if (firmware_has_feature(FW_FEATURE_ISERIES) && + get_lppaca()->shared_proc) { get_lppaca()->virtual_decr = val; cur_dec = get_dec(); if (cur_dec > val) From a240da35a1087804cbdc3faba949445e64d1eecb Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 28 Jun 2006 11:53:56 +1000 Subject: [PATCH 28/43] [POWERPC] Remove unused function call_with_mmu_off Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/misc_64.S | 42 ----------------------------------- 1 file changed, 42 deletions(-) diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index e8883d42c43c..6bf4a4637209 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -101,48 +101,6 @@ _GLOBAL(call___do_IRQ) blr #endif /* CONFIG_IRQSTACKS */ - /* - * To be called by C code which needs to do some operations with MMU - * disabled. Note that interrupts have to be disabled by the caller - * prior to calling us. The code called _MUST_ be in the RMO of course - * and part of the linear mapping as we don't attempt to translate the - * stack pointer at all. The function is called with the stack switched - * to this CPU emergency stack - * - * prototype is void *call_with_mmu_off(void *func, void *data); - * - * the called function is expected to be of the form - * - * void *called(void *data); - */ -_GLOBAL(call_with_mmu_off) - mflr r0 /* get link, save it on stackframe */ - std r0,16(r1) - mr r1,r5 /* save old stack ptr */ - ld r1,PACAEMERGSP(r13) /* get emerg. stack */ - subi r1,r1,STACK_FRAME_OVERHEAD - std r0,16(r1) /* save link on emerg. stack */ - std r5,0(r1) /* save old stack ptr in backchain */ - ld r3,0(r3) /* get to real function ptr (assume same TOC) */ - bl 2f /* we need LR to return, continue at label 2 */ - - ld r0,16(r1) /* we return here from the call, get LR and */ - ld r1,0(r1) /* .. old stack ptr */ - mtspr SPRN_SRR0,r0 /* and get back to virtual mode with these */ - mfmsr r4 - ori r4,r4,MSR_IR|MSR_DR - mtspr SPRN_SRR1,r4 - rfid - -2: mtspr SPRN_SRR0,r3 /* coming from above, enter real mode */ - mr r3,r4 /* get parameter */ - mfmsr r0 - ori r0,r0,MSR_IR|MSR_DR - xori r0,r0,MSR_IR|MSR_DR - mtspr SPRN_SRR1,r0 - rfid - - .section ".toc","aw" PPC64_CACHES: .tc ppc64_caches[TC],ppc64_caches From 127efeb286bb772019236182a1b4fc14ff2ae00c Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 28 Jun 2006 11:55:49 +1000 Subject: [PATCH 29/43] [POWERPC] Consolidate some of kernel/misc*.S There were some common functions (mainly i/o). Also some small white space cleanups and remove a couple of small unused functions. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 3 +- arch/powerpc/kernel/misc.S | 203 ++++++++++++++++++++++++++++++++++ arch/powerpc/kernel/misc_32.S | 156 -------------------------- arch/powerpc/kernel/misc_64.S | 181 +----------------------------- 4 files changed, 209 insertions(+), 334 deletions(-) create mode 100644 arch/powerpc/kernel/misc.S diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 803858e86160..814f242aeb8c 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -50,7 +50,8 @@ extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o extra-$(CONFIG_8xx) := head_8xx.o extra-y += vmlinux.lds -obj-y += time.o prom.o traps.o setup-common.o udbg.o +obj-y += time.o prom.o traps.o setup-common.o \ + udbg.o misc.o obj-$(CONFIG_PPC32) += entry_32.o setup_32.o misc_32.o obj-$(CONFIG_PPC64) += misc_64.o dma_64.o iommu.o obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o diff --git a/arch/powerpc/kernel/misc.S b/arch/powerpc/kernel/misc.S new file mode 100644 index 000000000000..fc23040d5a26 --- /dev/null +++ b/arch/powerpc/kernel/misc.S @@ -0,0 +1,203 @@ +/* + * This file contains miscellaneous low-level functions. + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) + * and Paul Mackerras. + * + * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com) + * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include + + .text + +#ifdef CONFIG_PPC64 +#define IN_SYNC twi 0,r5,0; isync +#define EIEIO_32 +#define SYNC_64 sync +#else /* CONFIG_PPC32 */ +#define IN_SYNC +#define EIEIO_32 eieio +#define SYNC_64 +#endif +/* + * Returns (address we are running at) - (address we were linked at) + * for use before the text and data are mapped to KERNELBASE. + */ + +_GLOBAL(reloc_offset) + mflr r0 + bl 1f +1: mflr r3 + LOAD_REG_IMMEDIATE(r4,1b) + subf r3,r4,r3 + mtlr r0 + blr + +/* + * add_reloc_offset(x) returns x + reloc_offset(). + */ +_GLOBAL(add_reloc_offset) + mflr r0 + bl 1f +1: mflr r5 + LOAD_REG_IMMEDIATE(r4,1b) + subf r5,r4,r5 + add r3,r3,r5 + mtlr r0 + blr + +/* + * I/O string operations + * + * insb(port, buf, len) + * outsb(port, buf, len) + * insw(port, buf, len) + * outsw(port, buf, len) + * insl(port, buf, len) + * outsl(port, buf, len) + * insw_ns(port, buf, len) + * outsw_ns(port, buf, len) + * insl_ns(port, buf, len) + * outsl_ns(port, buf, len) + * + * The *_ns versions don't do byte-swapping. + */ +_GLOBAL(_insb) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,1 + blelr- +00: lbz r5,0(r3) + eieio + stbu r5,1(r4) + bdnz 00b + IN_SYNC + blr + +_GLOBAL(_outsb) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,1 + blelr- +00: lbzu r5,1(r4) + stb r5,0(r3) + EIEIO_32 + bdnz 00b + SYNC_64 + blr + +_GLOBAL(_insw) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhbrx r5,0,r3 + eieio + sthu r5,2(r4) + bdnz 00b + IN_SYNC + blr + +_GLOBAL(_outsw) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhzu r5,2(r4) + EIEIO_32 + sthbrx r5,0,r3 + bdnz 00b + SYNC_64 + blr + +_GLOBAL(_insl) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwbrx r5,0,r3 + eieio + stwu r5,4(r4) + bdnz 00b + IN_SYNC + blr + +_GLOBAL(_outsl) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwzu r5,4(r4) + stwbrx r5,0,r3 + EIEIO_32 + bdnz 00b + SYNC_64 + blr + +#ifdef CONFIG_PPC32 +_GLOBAL(__ide_mm_insw) +#endif +_GLOBAL(_insw_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhz r5,0(r3) + eieio + sthu r5,2(r4) + bdnz 00b + IN_SYNC + blr + +#ifdef CONFIG_PPC32 +_GLOBAL(__ide_mm_outsw) +#endif +_GLOBAL(_outsw_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhzu r5,2(r4) + sth r5,0(r3) + EIEIO_32 + bdnz 00b + SYNC_64 + blr + +#ifdef CONFIG_PPC32 +_GLOBAL(__ide_mm_insl) +#endif +_GLOBAL(_insl_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwz r5,0(r3) + eieio + stwu r5,4(r4) + bdnz 00b + IN_SYNC + blr + +#ifdef CONFIG_PPC32 +_GLOBAL(__ide_mm_outsl) +#endif +_GLOBAL(_outsl_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwzu r5,4(r4) + stw r5,0(r3) + EIEIO_32 + bdnz 00b + SYNC_64 + blr + diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 01d3916c4cb1..c74774e2175d 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -60,32 +60,6 @@ _GLOBAL(mulhdu) addze r3,r3 blr -/* - * Returns (address we're running at) - (address we were linked at) - * for use before the text and data are mapped to KERNELBASE. - */ -_GLOBAL(reloc_offset) - mflr r0 - bl 1f -1: mflr r3 - LOAD_REG_IMMEDIATE(r4,1b) - subf r3,r4,r3 - mtlr r0 - blr - -/* - * add_reloc_offset(x) returns x + reloc_offset(). - */ -_GLOBAL(add_reloc_offset) - mflr r0 - bl 1f -1: mflr r5 - LOAD_REG_IMMEDIATE(r4,1b) - subf r5,r4,r5 - add r3,r3,r5 - mtlr r0 - blr - /* * sub_reloc_offset(x) returns x - reloc_offset(). */ @@ -780,136 +754,6 @@ _GLOBAL(atomic_set_mask) bne- 10b blr -/* - * I/O string operations - * - * insb(port, buf, len) - * outsb(port, buf, len) - * insw(port, buf, len) - * outsw(port, buf, len) - * insl(port, buf, len) - * outsl(port, buf, len) - * insw_ns(port, buf, len) - * outsw_ns(port, buf, len) - * insl_ns(port, buf, len) - * outsl_ns(port, buf, len) - * - * The *_ns versions don't do byte-swapping. - */ -_GLOBAL(_insb) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,1 - blelr- -00: lbz r5,0(r3) - eieio - stbu r5,1(r4) - bdnz 00b - blr - -_GLOBAL(_outsb) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,1 - blelr- -00: lbzu r5,1(r4) - stb r5,0(r3) - eieio - bdnz 00b - blr - -_GLOBAL(_insw) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhbrx r5,0,r3 - eieio - sthu r5,2(r4) - bdnz 00b - blr - -_GLOBAL(_outsw) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhzu r5,2(r4) - eieio - sthbrx r5,0,r3 - bdnz 00b - blr - -_GLOBAL(_insl) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwbrx r5,0,r3 - eieio - stwu r5,4(r4) - bdnz 00b - blr - -_GLOBAL(_outsl) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwzu r5,4(r4) - stwbrx r5,0,r3 - eieio - bdnz 00b - blr - -_GLOBAL(__ide_mm_insw) -_GLOBAL(_insw_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhz r5,0(r3) - eieio - sthu r5,2(r4) - bdnz 00b - blr - -_GLOBAL(__ide_mm_outsw) -_GLOBAL(_outsw_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhzu r5,2(r4) - sth r5,0(r3) - eieio - bdnz 00b - blr - -_GLOBAL(__ide_mm_insl) -_GLOBAL(_insl_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwz r5,0(r3) - eieio - stwu r5,4(r4) - bdnz 00b - blr - -_GLOBAL(__ide_mm_outsl) -_GLOBAL(_outsl_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwzu r5,4(r4) - stw r5,0(r3) - eieio - bdnz 00b - blr - /* * Extended precision shifts. * diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index 6bf4a4637209..580891cb8ccb 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -1,14 +1,12 @@ /* - * arch/powerpc/kernel/misc64.S - * * This file contains miscellaneous low-level functions. * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) * and Paul Mackerras. * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com) - * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) - * + * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version @@ -30,41 +28,10 @@ .text -/* - * Returns (address we are running at) - (address we were linked at) - * for use before the text and data are mapped to KERNELBASE. - */ - -_GLOBAL(reloc_offset) - mflr r0 - bl 1f -1: mflr r3 - LOAD_REG_IMMEDIATE(r4,1b) - subf r3,r4,r3 - mtlr r0 - blr - -/* - * add_reloc_offset(x) returns x + reloc_offset(). - */ -_GLOBAL(add_reloc_offset) - mflr r0 - bl 1f -1: mflr r5 - LOAD_REG_IMMEDIATE(r4,1b) - subf r5,r4,r5 - add r3,r3,r5 - mtlr r0 - blr - _GLOBAL(get_msr) mfmsr r3 blr -_GLOBAL(get_dar) - mfdar r3 - blr - _GLOBAL(get_srr0) mfsrr0 r3 blr @@ -72,10 +39,6 @@ _GLOBAL(get_srr0) _GLOBAL(get_srr1) mfsrr1 r3 blr - -_GLOBAL(get_sp) - mr r3,r1 - blr #ifdef CONFIG_IRQSTACKS _GLOBAL(call_do_softirq) @@ -281,144 +244,6 @@ _GLOBAL(__flush_dcache_icache) bdnz 1b isync blr - -/* - * I/O string operations - * - * insb(port, buf, len) - * outsb(port, buf, len) - * insw(port, buf, len) - * outsw(port, buf, len) - * insl(port, buf, len) - * outsl(port, buf, len) - * insw_ns(port, buf, len) - * outsw_ns(port, buf, len) - * insl_ns(port, buf, len) - * outsl_ns(port, buf, len) - * - * The *_ns versions don't do byte-swapping. - */ -_GLOBAL(_insb) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,1 - blelr- -00: lbz r5,0(r3) - eieio - stbu r5,1(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsb) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,1 - blelr- -00: lbzu r5,1(r4) - stb r5,0(r3) - bdnz 00b - sync - blr - -_GLOBAL(_insw) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhbrx r5,0,r3 - eieio - sthu r5,2(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsw) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhzu r5,2(r4) - sthbrx r5,0,r3 - bdnz 00b - sync - blr - -_GLOBAL(_insl) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwbrx r5,0,r3 - eieio - stwu r5,4(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsl) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwzu r5,4(r4) - stwbrx r5,0,r3 - bdnz 00b - sync - blr - -/* _GLOBAL(ide_insw) now in drivers/ide/ide-iops.c */ -_GLOBAL(_insw_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhz r5,0(r3) - eieio - sthu r5,2(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -/* _GLOBAL(ide_outsw) now in drivers/ide/ide-iops.c */ -_GLOBAL(_outsw_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhzu r5,2(r4) - sth r5,0(r3) - bdnz 00b - sync - blr - -_GLOBAL(_insl_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwz r5,0(r3) - eieio - stwu r5,4(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsl_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwzu r5,4(r4) - stw r5,0(r3) - bdnz 00b - sync - blr /* * identify_cpu and calls setup_cpu @@ -563,6 +388,7 @@ _GLOBAL(real_writeb) blr #endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */ +#ifdef CONFIG_CPU_FREQ_PMAC64 /* * SCOM access functions for 970 (FX only for now) * @@ -631,6 +457,7 @@ _GLOBAL(scom970_write) /* restore interrupts */ mtmsrd r5,1 blr +#endif /* CONFIG_CPU_FREQ_PMAC64 */ /* From f127a2b5cf542968ea1c428f86ffc780ea929452 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sun, 25 Jun 2006 01:49:07 -0700 Subject: [PATCH 30/43] [POWERPC] powerpc: kconfig warning fix arch/powerpc/Kconfig:420:warning: leading whitespace ignored Stop doing that. Cc: Benjamin Herrenschmidt Cc: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 4f4071a7bdfb..baec4e3ff832 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -413,7 +413,7 @@ config PPC_CELL_NATIVE default n config PPC_IBM_CELL_BLADE - bool " IBM Cell Blade" + bool "IBM Cell Blade" depends on PPC_MULTIPLATFORM && PPC64 select PPC_CELL_NATIVE select PPC_RTAS From 3965f8c59778b0d37460ec268f92c0c382546b5c Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 28 Jun 2006 13:50:39 +1000 Subject: [PATCH 31/43] [POWERPC] Simplify the code defining the 64-bit CPU features Signed-off-by: Paul Mackerras --- include/asm-powerpc/cputable.h | 48 ++++++++++++++-------------------- 1 file changed, 20 insertions(+), 28 deletions(-) diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index fab41c280aa1..1ba3c9983614 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -117,38 +117,30 @@ extern void do_cpu_ftr_fixups(unsigned long offset); #define CPU_FTR_PPC_LE ASM_CONST(0x0000000000200000) #define CPU_FTR_REAL_LE ASM_CONST(0x0000000000400000) +/* + * Add the 64-bit processor unique features in the top half of the word; + * on 32-bit, make the names available but defined to be 0. + */ #ifdef __powerpc64__ -/* Add the 64b processor unique features in the top half of the word */ -#define CPU_FTR_SLB ASM_CONST(0x0000000100000000) -#define CPU_FTR_16M_PAGE ASM_CONST(0x0000000200000000) -#define CPU_FTR_TLBIEL ASM_CONST(0x0000000400000000) -#define CPU_FTR_NOEXECUTE ASM_CONST(0x0000000800000000) -#define CPU_FTR_IABR ASM_CONST(0x0000002000000000) -#define CPU_FTR_MMCRA ASM_CONST(0x0000004000000000) -#define CPU_FTR_CTRL ASM_CONST(0x0000008000000000) -#define CPU_FTR_SMT ASM_CONST(0x0000010000000000) -#define CPU_FTR_COHERENT_ICACHE ASM_CONST(0x0000020000000000) -#define CPU_FTR_LOCKLESS_TLBIE ASM_CONST(0x0000040000000000) -#define CPU_FTR_CI_LARGE_PAGE ASM_CONST(0x0000100000000000) -#define CPU_FTR_PAUSE_ZERO ASM_CONST(0x0000200000000000) -#define CPU_FTR_PURR ASM_CONST(0x0000400000000000) +#define LONG_ASM_CONST(x) ASM_CONST(x) #else -/* ensure on 32b processors the flags are available for compiling but - * don't do anything */ -#define CPU_FTR_SLB ASM_CONST(0x0) -#define CPU_FTR_16M_PAGE ASM_CONST(0x0) -#define CPU_FTR_TLBIEL ASM_CONST(0x0) -#define CPU_FTR_NOEXECUTE ASM_CONST(0x0) -#define CPU_FTR_IABR ASM_CONST(0x0) -#define CPU_FTR_MMCRA ASM_CONST(0x0) -#define CPU_FTR_CTRL ASM_CONST(0x0) -#define CPU_FTR_SMT ASM_CONST(0x0) -#define CPU_FTR_COHERENT_ICACHE ASM_CONST(0x0) -#define CPU_FTR_LOCKLESS_TLBIE ASM_CONST(0x0) -#define CPU_FTR_CI_LARGE_PAGE ASM_CONST(0x0) -#define CPU_FTR_PURR ASM_CONST(0x0) +#define LONG_ASM_CONST(x) 0 #endif +#define CPU_FTR_SLB LONG_ASM_CONST(0x0000000100000000) +#define CPU_FTR_16M_PAGE LONG_ASM_CONST(0x0000000200000000) +#define CPU_FTR_TLBIEL LONG_ASM_CONST(0x0000000400000000) +#define CPU_FTR_NOEXECUTE LONG_ASM_CONST(0x0000000800000000) +#define CPU_FTR_IABR LONG_ASM_CONST(0x0000002000000000) +#define CPU_FTR_MMCRA LONG_ASM_CONST(0x0000004000000000) +#define CPU_FTR_CTRL LONG_ASM_CONST(0x0000008000000000) +#define CPU_FTR_SMT LONG_ASM_CONST(0x0000010000000000) +#define CPU_FTR_COHERENT_ICACHE LONG_ASM_CONST(0x0000020000000000) +#define CPU_FTR_LOCKLESS_TLBIE LONG_ASM_CONST(0x0000040000000000) +#define CPU_FTR_CI_LARGE_PAGE LONG_ASM_CONST(0x0000100000000000) +#define CPU_FTR_PAUSE_ZERO LONG_ASM_CONST(0x0000200000000000) +#define CPU_FTR_PURR LONG_ASM_CONST(0x0000400000000000) + #ifndef __ASSEMBLY__ #define CPU_FTR_PPCAS_ARCH_V2_BASE (CPU_FTR_SLB | \ From 649e85797259162f7fdc696420e7492f20226f2d Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 28 Jun 2006 13:57:16 +1000 Subject: [PATCH 32/43] [POWERPC] Make sure we select CONFIG_NEW_LEDS if ADB_PMU_LED is set Signed-off-by: Paul Mackerras --- drivers/macintosh/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 062dac26f2ae..54f3f6b94efc 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -81,6 +81,7 @@ config ADB_PMU config ADB_PMU_LED bool "Support for the Power/iBook front LED" depends on ADB_PMU + select NEW_LEDS select LEDS_CLASS help Support the front LED on Power/iBooks as a generic LED that can From 9ad494f62444ee37209e85173377c67612e66ef1 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 28 Jun 2006 00:37:45 -0500 Subject: [PATCH 33/43] powerpc: minor cleanups for mpc86xx * Remove duplicated cputable entry for 8641 (matches w/7448) * Removed __init from function prototypes in mpc86xx.h * Moved pci fixups into board specific code * Moved mpc86xx_exclude_device to generic mpc86xx pci code * Fixed sparse warnings in mpc86xx_smp.c * Removed board specific header include from asm-powerpc/mpc86xx.h Signed-off-by: Kumar Gala --- arch/powerpc/kernel/cputable.c | 12 -- arch/powerpc/platforms/86xx/mpc86xx.h | 8 +- arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 130 ++++++++++++++++++-- arch/powerpc/platforms/86xx/mpc86xx_smp.c | 9 +- arch/powerpc/platforms/86xx/pci.c | 136 ++------------------- include/asm-powerpc/mpc86xx.h | 4 - 6 files changed, 139 insertions(+), 160 deletions(-) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 1c114880dc05..abf7d42a8b07 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -722,18 +722,6 @@ struct cpu_spec cpu_specs[] = { .oprofile_type = PPC_OPROFILE_G4, .platform = "ppc7450", }, - { /* 8641 */ - .pvr_mask = 0xffffffff, - .pvr_value = 0x80040010, - .cpu_name = "8641", - .cpu_features = CPU_FTRS_7447A, - .cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP, - .icache_bsize = 32, - .dcache_bsize = 32, - .num_pmcs = 6, - .cpu_setup = __setup_cpu_745x - }, - { /* 82xx (8240, 8245, 8260 are all 603e cores) */ .pvr_mask = 0x7fff0000, .pvr_value = 0x00810000, diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h b/arch/powerpc/platforms/86xx/mpc86xx.h index e3c9e4f417d3..2834462590b8 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx.h +++ b/arch/powerpc/platforms/86xx/mpc86xx.h @@ -15,11 +15,13 @@ * mpc86xx_* files. Mostly for use by mpc86xx_setup(). */ -extern int __init add_bridge(struct device_node *dev); +extern int add_bridge(struct device_node *dev); -extern void __init setup_indirect_pcie(struct pci_controller *hose, +extern int mpc86xx_exclude_device(u_char bus, u_char devfn); + +extern void setup_indirect_pcie(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data); -extern void __init setup_indirect_pcie_nomap(struct pci_controller *hose, +extern void setup_indirect_pcie_nomap(struct pci_controller *hose, void __iomem *cfg_addr, void __iomem *cfg_data); diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index 483c21df181e..ac7f41802e94 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -36,6 +36,7 @@ #include #include "mpc86xx.h" +#include "mpc8641_hpcn.h" #ifndef CONFIG_PCI unsigned long isa_io_base = 0; @@ -186,17 +187,130 @@ mpc86xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET; } - -int -mpc86xx_exclude_device(u_char bus, u_char devfn) +static void __devinit quirk_ali1575(struct pci_dev *dev) { -#if !defined(CONFIG_PCI) - if (bus == 0 && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; -#endif + unsigned short temp; - return PCIBIOS_SUCCESSFUL; + /* + * ALI1575 interrupts route table setup: + * + * IRQ pin IRQ# + * PIRQA ---- 3 + * PIRQB ---- 4 + * PIRQC ---- 5 + * PIRQD ---- 6 + * PIRQE ---- 9 + * PIRQF ---- 10 + * PIRQG ---- 11 + * PIRQH ---- 12 + * + * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD + * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA + */ + pci_write_config_dword(dev, 0x48, 0xb9317542); + + /* USB 1.1 OHCI controller 1, interrupt: PIRQE */ + pci_write_config_byte(dev, 0x86, 0x0c); + + /* USB 1.1 OHCI controller 2, interrupt: PIRQF */ + pci_write_config_byte(dev, 0x87, 0x0d); + + /* USB 1.1 OHCI controller 3, interrupt: PIRQH */ + pci_write_config_byte(dev, 0x88, 0x0f); + + /* USB 2.0 controller, interrupt: PIRQ7 */ + pci_write_config_byte(dev, 0x74, 0x06); + + /* Audio controller, interrupt: PIRQE */ + pci_write_config_byte(dev, 0x8a, 0x0c); + + /* Modem controller, interrupt: PIRQF */ + pci_write_config_byte(dev, 0x8b, 0x0d); + + /* HD audio controller, interrupt: PIRQG */ + pci_write_config_byte(dev, 0x8c, 0x0e); + + /* Serial ATA interrupt: PIRQD */ + pci_write_config_byte(dev, 0x8d, 0x0b); + + /* SMB interrupt: PIRQH */ + pci_write_config_byte(dev, 0x8e, 0x0f); + + /* PMU ACPI SCI interrupt: PIRQH */ + pci_write_config_byte(dev, 0x8f, 0x0f); + + /* Primary PATA IDE IRQ: 14 + * Secondary PATA IDE IRQ: 15 + */ + pci_write_config_byte(dev, 0x44, 0x3d); + pci_write_config_byte(dev, 0x75, 0x0f); + + /* Set IRQ14 and IRQ15 to legacy IRQs */ + pci_read_config_word(dev, 0x46, &temp); + temp |= 0xc000; + pci_write_config_word(dev, 0x46, temp); + + /* Set i8259 interrupt trigger + * IRQ 3: Level + * IRQ 4: Level + * IRQ 5: Level + * IRQ 6: Level + * IRQ 7: Level + * IRQ 9: Level + * IRQ 10: Level + * IRQ 11: Level + * IRQ 12: Level + * IRQ 14: Edge + * IRQ 15: Edge + */ + outb(0xfa, 0x4d0); + outb(0x1e, 0x4d1); } + +static void __devinit quirk_uli5288(struct pci_dev *dev) +{ + unsigned char c; + + pci_read_config_byte(dev,0x83,&c); + c |= 0x80; + pci_write_config_byte(dev, 0x83, c); + + pci_write_config_byte(dev, 0x09, 0x01); + pci_write_config_byte(dev, 0x0a, 0x06); + + pci_read_config_byte(dev,0x83,&c); + c &= 0x7f; + pci_write_config_byte(dev, 0x83, c); + + pci_read_config_byte(dev,0x84,&c); + c |= 0x01; + pci_write_config_byte(dev, 0x84, c); +} + +static void __devinit quirk_uli5229(struct pci_dev *dev) +{ + unsigned short temp; + pci_write_config_word(dev, 0x04, 0x0405); + pci_read_config_word(dev, 0x4a, &temp); + temp |= 0x1000; + pci_write_config_word(dev, 0x4a, temp); +} + +static void __devinit early_uli5249(struct pci_dev *dev) +{ + unsigned char temp; + pci_write_config_word(dev, 0x04, 0x0007); + pci_read_config_byte(dev, 0x7c, &temp); + pci_write_config_byte(dev, 0x7c, 0x80); + pci_write_config_byte(dev, 0x09, 0x01); + pci_write_config_byte(dev, 0x7c, temp); + dev->class |= 0x1; +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); #endif /* CONFIG_PCI */ diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c index 944ec4b71416..9cca3d1a67f2 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c @@ -34,8 +34,8 @@ extern unsigned long __secondary_hold_acknowledge; static void __init smp_86xx_release_core(int nr) { - void *mcm_vaddr; - unsigned long vaddr, pcr; + __be32 __iomem *mcm_vaddr; + unsigned long pcr; if (nr < 0 || nr >= NR_CPUS) return; @@ -45,10 +45,9 @@ smp_86xx_release_core(int nr) */ mcm_vaddr = ioremap(get_immrbase() + MPC86xx_MCM_OFFSET, MPC86xx_MCM_SIZE); - vaddr = (unsigned long)mcm_vaddr + MCM_PORT_CONFIG_OFFSET; - pcr = in_be32((volatile unsigned *)vaddr); + pcr = in_be32(mcm_vaddr + (MCM_PORT_CONFIG_OFFSET >> 2)); pcr |= 1 << (nr + 24); - out_be32((volatile unsigned *)vaddr, pcr); + out_be32(mcm_vaddr + (MCM_PORT_CONFIG_OFFSET >> 2), pcr); } diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c index 5180df7c75bc..0d8b34089b96 100644 --- a/arch/powerpc/platforms/86xx/pci.c +++ b/arch/powerpc/platforms/86xx/pci.c @@ -122,15 +122,12 @@ static void __init setup_pcie_atmu(struct pci_controller *hose, struct resource static void __init mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size) { - volatile struct ccsr_pex *pcie; u16 cmd; unsigned int temps; DBG("PCIE host controller register offset 0x%08x, size 0x%08x.\n", pcie_offset, pcie_size); - pcie = ioremap(pcie_offset, pcie_size); - early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd); cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO; @@ -144,6 +141,14 @@ mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size) early_write_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, temps); } +int mpc86xx_exclude_device(u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + return PCIBIOS_SUCCESSFUL; +} + int __init add_bridge(struct device_node *dev) { int len; @@ -198,128 +203,3 @@ int __init add_bridge(struct device_node *dev) return 0; } - -static void __devinit quirk_ali1575(struct pci_dev *dev) -{ - unsigned short temp; - - /* - * ALI1575 interrupts route table setup: - * - * IRQ pin IRQ# - * PIRQA ---- 3 - * PIRQB ---- 4 - * PIRQC ---- 5 - * PIRQD ---- 6 - * PIRQE ---- 9 - * PIRQF ---- 10 - * PIRQG ---- 11 - * PIRQH ---- 12 - * - * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD - * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA - */ - pci_write_config_dword(dev, 0x48, 0xb9317542); - - /* USB 1.1 OHCI controller 1, interrupt: PIRQE */ - pci_write_config_byte(dev, 0x86, 0x0c); - - /* USB 1.1 OHCI controller 2, interrupt: PIRQF */ - pci_write_config_byte(dev, 0x87, 0x0d); - - /* USB 1.1 OHCI controller 3, interrupt: PIRQH */ - pci_write_config_byte(dev, 0x88, 0x0f); - - /* USB 2.0 controller, interrupt: PIRQ7 */ - pci_write_config_byte(dev, 0x74, 0x06); - - /* Audio controller, interrupt: PIRQE */ - pci_write_config_byte(dev, 0x8a, 0x0c); - - /* Modem controller, interrupt: PIRQF */ - pci_write_config_byte(dev, 0x8b, 0x0d); - - /* HD audio controller, interrupt: PIRQG */ - pci_write_config_byte(dev, 0x8c, 0x0e); - - /* Serial ATA interrupt: PIRQD */ - pci_write_config_byte(dev, 0x8d, 0x0b); - - /* SMB interrupt: PIRQH */ - pci_write_config_byte(dev, 0x8e, 0x0f); - - /* PMU ACPI SCI interrupt: PIRQH */ - pci_write_config_byte(dev, 0x8f, 0x0f); - - /* Primary PATA IDE IRQ: 14 - * Secondary PATA IDE IRQ: 15 - */ - pci_write_config_byte(dev, 0x44, 0x3d); - pci_write_config_byte(dev, 0x75, 0x0f); - - /* Set IRQ14 and IRQ15 to legacy IRQs */ - pci_read_config_word(dev, 0x46, &temp); - temp |= 0xc000; - pci_write_config_word(dev, 0x46, temp); - - /* Set i8259 interrupt trigger - * IRQ 3: Level - * IRQ 4: Level - * IRQ 5: Level - * IRQ 6: Level - * IRQ 7: Level - * IRQ 9: Level - * IRQ 10: Level - * IRQ 11: Level - * IRQ 12: Level - * IRQ 14: Edge - * IRQ 15: Edge - */ - outb(0xfa, 0x4d0); - outb(0x1e, 0x4d1); -} - -static void __devinit quirk_uli5288(struct pci_dev *dev) -{ - unsigned char c; - - pci_read_config_byte(dev,0x83,&c); - c |= 0x80; - pci_write_config_byte(dev, 0x83, c); - - pci_write_config_byte(dev, 0x09, 0x01); - pci_write_config_byte(dev, 0x0a, 0x06); - - pci_read_config_byte(dev,0x83,&c); - c &= 0x7f; - pci_write_config_byte(dev, 0x83, c); - - pci_read_config_byte(dev,0x84,&c); - c |= 0x01; - pci_write_config_byte(dev, 0x84, c); -} - -static void __devinit quirk_uli5229(struct pci_dev *dev) -{ - unsigned short temp; - pci_write_config_word(dev, 0x04, 0x0405); - pci_read_config_word(dev, 0x4a, &temp); - temp |= 0x1000; - pci_write_config_word(dev, 0x4a, temp); -} - -static void __devinit early_uli5249(struct pci_dev *dev) -{ - unsigned char temp; - pci_write_config_word(dev, 0x04, 0x0007); - pci_read_config_byte(dev, 0x7c, &temp); - pci_write_config_byte(dev, 0x7c, 0x80); - pci_write_config_byte(dev, 0x09, 0x01); - pci_write_config_byte(dev, 0x7c, temp); - dev->class |= 0x1; -} - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); diff --git a/include/asm-powerpc/mpc86xx.h b/include/asm-powerpc/mpc86xx.h index d0a6718d188b..00d72a7284e9 100644 --- a/include/asm-powerpc/mpc86xx.h +++ b/include/asm-powerpc/mpc86xx.h @@ -20,10 +20,6 @@ #ifdef CONFIG_PPC_86xx -#ifdef CONFIG_MPC8641_HPCN -#include -#endif - #define _IO_BASE isa_io_base #define _ISA_MEM_BASE isa_mem_base #ifdef CONFIG_PCI From 1729dc7833014eaba3520091a673dbdc9242d9f9 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 29 Jun 2006 16:16:15 +1000 Subject: [PATCH 34/43] [POWERPC] Correct the MAX_CONTEXT definition When we increased the address space per process to 2^44 bytes, the number of contexts that we could actually use reduced, but we forgot to decrease the MAX_CONTEXT definition. (Fortunately this would only cause problems if we actually had more than 512k user processes running.) This patch corrects the definition. Signed-off-by: Paul Mackerras --- include/asm-powerpc/mmu_context.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/include/asm-powerpc/mmu_context.h b/include/asm-powerpc/mmu_context.h index 8c6b1a6d944f..083ac917bd29 100644 --- a/include/asm-powerpc/mmu_context.h +++ b/include/asm-powerpc/mmu_context.h @@ -25,8 +25,13 @@ static inline void enter_lazy_tlb(struct mm_struct *mm, { } +/* + * The proto-VSID space has 2^35 - 1 segments available for user mappings. + * Each segment contains 2^28 bytes. Each context maps 2^44 bytes, + * so we can support 2^19-1 contexts (19 == 35 + 28 - 44). + */ #define NO_CONTEXT 0 -#define MAX_CONTEXT (0x100000-1) +#define MAX_CONTEXT ((1UL << 19) - 1) extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm); extern void destroy_context(struct mm_struct *mm); From c5d56332fd6c2f0c7cf9d1f65416076f2711ea28 Mon Sep 17 00:00:00 2001 From: Zang Roy-r61911 Date: Tue, 13 Jun 2006 15:07:15 +0800 Subject: [PATCH 35/43] [POWERPC] Add general support for mpc7448hpc2 (Taiga) platform Add support for Freescale mpc7448 (Taiga) board support Signed-off-by: Roy Zang Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 8 +- arch/powerpc/kernel/legacy_serial.c | 11 + arch/powerpc/platforms/Makefile | 1 + arch/powerpc/platforms/embedded6xx/Kconfig | 15 + arch/powerpc/platforms/embedded6xx/Makefile | 4 + .../platforms/embedded6xx/mpc7448_hpc2.c | 335 ++++++++++++++++++ .../platforms/embedded6xx/mpc7448_hpc2.h | 26 ++ 7 files changed, 397 insertions(+), 3 deletions(-) create mode 100644 arch/powerpc/platforms/embedded6xx/Makefile create mode 100644 arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c create mode 100644 arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index baec4e3ff832..0b5e225c2d51 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -336,7 +336,7 @@ config PPC_ISERIES config EMBEDDED6xx bool "Embedded 6xx/7xx/7xxx-based board" - depends on PPC32 && BROKEN + depends on PPC32 && (BROKEN||BROKEN_ON_SMP) config APUS bool "Amiga-APUS" @@ -436,7 +436,8 @@ config U3_DART default n config MPIC - depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP + depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP \ + || MPC7448HPC2 bool default y @@ -821,7 +822,8 @@ config MCA bool config PCI - bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) + bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) \ + || MPC7448HPC2 default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx && !PPC_86xx default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS default PCI_QSPAN if !4xx && !CPM2 && 8xx diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 6e67b5b49ba1..3a9b78d03542 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -302,6 +302,17 @@ void __init find_legacy_serial_ports(void) of_node_put(isa); } + /* First fill our array with tsi-bridge ports */ + for (np = NULL; (np = of_find_compatible_node(np, "serial", "ns16550")) != NULL;) { + struct device_node *tsi = of_get_parent(np); + if (tsi && !strcmp(tsi->type, "tsi-bridge")) { + index = add_legacy_soc_port(np, np); + if (index >= 0 && np == stdout) + legacy_serial_console = index; + } + of_node_put(tsi); + } + #ifdef CONFIG_PCI /* Next, try to locate PCI ports */ for (np = NULL; (np = of_find_all_nodes(np));) { diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 292863694562..5cf46dc57895 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -14,3 +14,4 @@ obj-$(CONFIG_PPC_PSERIES) += pseries/ obj-$(CONFIG_PPC_ISERIES) += iseries/ obj-$(CONFIG_PPC_MAPLE) += maple/ obj-$(CONFIG_PPC_CELL) += cell/ +obj-$(CONFIG_EMBEDDED6xx) += embedded6xx/ diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 4fdbc9ae876b..ba07a9a7c039 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -74,6 +74,16 @@ config SANDPOINT Select SANDPOINT if configuring for a Motorola Sandpoint X3 (any flavor). +config MPC7448HPC2 + bool "Freescale MPC7448HPC2(Taiga)" + select TSI108_BRIDGE + select DEFAULT_UIMAGE + select PPC_UDBG_16550 + select MPIC + help + Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga) + platform + config RADSTONE_PPC7D bool "Radstone Technology PPC7D board" select PPC_I8259 @@ -221,6 +231,11 @@ config MV64X60 select PPC_INDIRECT_PCI default y +config TSI108_BRIDGE + bool + depends on MPC7448HPC2 + default y + menu "Set bridge options" depends on MV64X60 diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile new file mode 100644 index 000000000000..fa499fe59291 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/Makefile @@ -0,0 +1,4 @@ +# +# Makefile for the 6xx/7xx/7xxxx linux kernel. +# +obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c new file mode 100644 index 000000000000..d7a4fc7ca238 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -0,0 +1,335 @@ +/* + * mpc7448_hpc2.c + * + * Board setup routines for the Freescale Taiga platform + * + * Author: Jacob Pan + * jacob.pan@freescale.com + * Author: Xianghua Xiao + * x.xiao@freescale.com + * Maintainer: Roy Zang + * Add Flat Device Tree support fot mpc7448hpc2 board + * + * Copyright 2004-2006 Freescale Semiconductor, Inc. + * + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "mpc7448_hpc2.h" +#include +#include + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) do { printk(fmt); } while(0) +#else +#define DBG(fmt...) do { } while(0) +#endif + +#ifndef CONFIG_PCI +isa_io_base = MPC7448_HPC2_ISA_IO_BASE; +isa_mem_base = MPC7448_HPC2_ISA_MEM_BASE; +pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET; +#endif + +extern int tsi108_setup_pci(struct device_node *dev); +extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); +extern void tsi108_pci_int_init(void); +extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused); + +/* + * Define all of the IRQ senses and polarities. Taken from the + * mpc7448hpc manual. + * Note: Likely, this table and the following function should be + * obtained and derived from the OF Device Tree. + */ + +static u_char mpc7448_hpc2_pic_initsenses[] __initdata = { + /* External on-board sources */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[0] XINT0 from FPGA */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[1] XINT1 from FPGA */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[2] PHY_INT from both GIGE */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[3] RESERVED */ + /* Internal Tsi108/109 interrupt sources */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA0 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA1 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA2 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA3 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART0 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART1 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* I2C */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* GPIO */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE0 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE1 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* HLP */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* SDC */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Processor IF */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* PCI/X block */ +}; + +int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + else + return PCIBIOS_SUCCESSFUL; +} + +/* + * find pci slot by devfn in interrupt map of OF tree + */ +u8 find_slot_by_devfn(unsigned int *interrupt_map, unsigned int devfn) +{ + int i; + unsigned int tmp; + for (i = 0; i < 4; i++){ + tmp = interrupt_map[i*4*7]; + if ((tmp >> 11) == (devfn >> 3)) + return i; + } + return i; +} + +/* + * Scans the interrupt map for pci device + */ +void mpc7448_hpc2_fixup_irq(struct pci_dev *dev) +{ + struct pci_controller *hose; + struct device_node *node; + unsigned int *interrupt; + int busnr; + int len; + u8 slot; + u8 pin; + + /* Lookup the hose */ + busnr = dev->bus->number; + hose = pci_bus_to_hose(busnr); + if (!hose) + printk(KERN_ERR "No pci hose found\n"); + + /* Check it has an OF node associated */ + node = (struct device_node *) hose->arch_data; + if (!node) + printk(KERN_ERR "No pci node found\n"); + + interrupt = (unsigned int *) get_property(node, "interrupt-map", &len); + slot = find_slot_by_devfn(interrupt, dev->devfn); + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + if (pin == 0 || pin > 4) + pin = 1; + pin--; + dev->irq = interrupt[slot*4*7 + pin*7 + 5]; + DBG("TSI_PCI: dev->irq = 0x%x\n", dev->irq); +} +/* temporary pci irq map fixup*/ + +void __init mpc7448_hpc2_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + for_each_pci_dev(dev) { + mpc7448_hpc2_fixup_irq(dev); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } +} + +static void __init mpc7448_hpc2_setup_arch(void) +{ + struct device_node *cpu; + struct device_node *np; + if (ppc_md.progress) + ppc_md.progress("mpc7448_hpc2_setup_arch():set_bridge", 0); + + cpu = of_find_node_by_type(NULL, "cpu"); + if (cpu != 0) { + unsigned int *fp; + + fp = (int *)get_property(cpu, "clock-frequency", NULL); + if (fp != 0) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(cpu); + } + tsi108_csr_vir_base = get_vir_csrbase(); + +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + +#ifdef CONFIG_BLK_DEV_INITRD + ROOT_DEV = Root_RAM0; +#endif + + /* setup PCI host bridge */ +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + tsi108_setup_pci(np); + + ppc_md.pci_exclude_device = mpc7448_hpc2_exclude_device; + if (ppc_md.progress) + ppc_md.progress("tsi108: resources set", 0x100); +#endif + + printk(KERN_INFO "MPC7448HPC2 (TAIGA) Platform\n"); + printk(KERN_INFO + "Jointly ported by Freescale and Tundra Semiconductor\n"); + printk(KERN_INFO + "Enabling L2 cache then enabling the HID0 prefetch engine.\n"); +} + +/* + * Interrupt setup and service. Interrrupts on the mpc7448_hpc2 come + * from the four external INT pins, PCI interrupts are routed via + * PCI interrupt control registers, it generates internal IRQ23 + * + * Interrupt routing on the Taiga Board: + * TSI108:PB_INT[0] -> CPU0:INT# + * TSI108:PB_INT[1] -> CPU0:MCP# + * TSI108:PB_INT[2] -> N/C + * TSI108:PB_INT[3] -> N/C + */ +static void __init mpc7448_hpc2_init_IRQ(void) +{ + struct mpic *mpic; + phys_addr_t mpic_paddr = 0; + struct device_node *tsi_pic; + + tsi_pic = of_find_node_by_type(NULL, "open-pic"); + if (tsi_pic) { + unsigned int size; + void *prop = get_property(tsi_pic, "reg", &size); + mpic_paddr = of_translate_address(tsi_pic, prop); + } + + if (mpic_paddr == 0) { + printk("%s: No tsi108 PIC found !\n", __FUNCTION__); + return; + } + + DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__, + (u32) mpic_paddr); + + mpic = mpic_alloc(mpic_paddr, + MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | + MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108), + 0, /* num_sources used */ + TSI108_IRQ_BASE, + 0, /* num_sources used */ + NR_IRQS - 4 /* XXXX */, + mpc7448_hpc2_pic_initsenses, + sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC"); + + BUG_ON(mpic == NULL); /* XXXX */ + + mpic_init(mpic); + mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic); + tsi108_pci_int_init(); + + /* Configure MPIC outputs to CPU0 */ + tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); +} + +void mpc7448_hpc2_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: Freescale Semiconductor\n"); + seq_printf(m, "machine\t\t: MPC7448hpc2\n"); +} + +void mpc7448_hpc2_restart(char *cmd) +{ + local_irq_disable(); + + /* Set exception prefix high - to the firmware */ + _nmask_and_or_msr(0, MSR_IP); + + for (;;) ; /* Spin until reset happens */ +} + +void mpc7448_hpc2_power_off(void) +{ + local_irq_disable(); + for (;;) ; /* No way to shut power off with software */ +} + +void mpc7448_hpc2_halt(void) +{ + mpc7448_hpc2_power_off(); +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init mpc7448_hpc2_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "mpc74xx")) + return 0; + return 1; +} + +static int mpc7448_machine_check_exception(struct pt_regs *regs) +{ + extern void tsi108_clear_pci_cfg_error(void); + const struct exception_table_entry *entry; + + /* Are we prepared to handle this fault */ + if ((entry = search_exception_tables(regs->nip)) != NULL) { + tsi108_clear_pci_cfg_error(); + regs->msr |= MSR_RI; + regs->nip = entry->fixup; + return 1; + } + return 0; + +} +define_machine(mpc7448_hpc2){ + .name = "MPC7448 HPC2", + .probe = mpc7448_hpc2_probe, + .setup_arch = mpc7448_hpc2_setup_arch, + .init_IRQ = mpc7448_hpc2_init_IRQ, + .show_cpuinfo = mpc7448_hpc2_show_cpuinfo, + .get_irq = mpic_get_irq, + .pcibios_fixup = mpc7448_hpc2_pcibios_fixup, + .restart = mpc7448_hpc2_restart, + .calibrate_decr = generic_calibrate_decr, + .machine_check_exception= mpc7448_machine_check_exception, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h new file mode 100644 index 000000000000..a543a5242e34 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h @@ -0,0 +1,26 @@ +/* + * mpc7448_hpc2.h + * + * Definitions for Freescale MPC7448_HPC2 platform + * + * Author: Jacob Pan + * jacob.pan@freescale.com + * Maintainer: Roy Zang + * + * 2006 (c) Freescale Semiconductor, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef __PPC_PLATFORMS_MPC7448_HPC2_H +#define __PPC_PLATFORMS_MPC7448_HPC2_H + +#include + +/* Base Addresses for the PCI bus + */ +#define MPC7448_HPC2_PCI_MEM_OFFSET (0x00000000) +#define MPC7448_HPC2_ISA_IO_BASE (0x00000000) +#define MPC7448_HPC2_ISA_MEM_BASE (0x00000000) +#endif /* __PPC_PLATFORMS_MPC7448_HPC2_H */ From 2b9d7467a6dbc41872c605511e105cbde1eda100 Mon Sep 17 00:00:00 2001 From: Zang Roy-r61911 Date: Tue, 13 Jun 2006 15:07:23 +0800 Subject: [PATCH 36/43] [POWERPC] Add tsi108 pci and platform device data register function Add Tundra Semiconductor tsi108 pci and platform device data register function support. Signed-off-by: Alexandre Bounine Signed-off-by: Roy Zang --- Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/Makefile | 1 + arch/powerpc/sysdev/tsi108_dev.c | 145 +++++++++++ arch/powerpc/sysdev/tsi108_pci.c | 412 +++++++++++++++++++++++++++++++ include/asm-powerpc/tsi108.h | 109 ++++++++ 4 files changed, 667 insertions(+) create mode 100644 arch/powerpc/sysdev/tsi108_dev.c create mode 100644 arch/powerpc/sysdev/tsi108_pci.c create mode 100644 include/asm-powerpc/tsi108.h diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index cef95b023730..63e81e74b45e 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_U3_DART) += dart_iommu.o obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_PPC_83xx) += ipic.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o +obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c new file mode 100644 index 000000000000..26a0cc820cde --- /dev/null +++ b/arch/powerpc/sysdev/tsi108_dev.c @@ -0,0 +1,145 @@ +/* + * tsi108/109 device setup code + * + * Maintained by Roy Zang < tie-fei.zang@freescale.com > + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) do { printk(fmt); } while(0) +#else +#define DBG(fmt...) do { } while(0) +#endif + +static phys_addr_t tsi108_csr_base = -1; + +phys_addr_t get_csrbase(void) +{ + struct device_node *tsi; + + if (tsi108_csr_base != -1) + return tsi108_csr_base; + + tsi = of_find_node_by_type(NULL, "tsi-bridge"); + if (tsi) { + unsigned int size; + void *prop = get_property(tsi, "reg", &size); + tsi108_csr_base = of_translate_address(tsi, prop); + of_node_put(tsi); + }; + return tsi108_csr_base; +} + +u32 get_vir_csrbase(void) +{ + return (u32) (ioremap(get_csrbase(), 0x10000)); +} + +EXPORT_SYMBOL(get_csrbase); +EXPORT_SYMBOL(get_vir_csrbase); + +static int __init tsi108_eth_of_init(void) +{ + struct device_node *np; + unsigned int i; + struct platform_device *tsi_eth_dev; + struct resource res; + int ret; + + for (np = NULL, i = 0; + (np = of_find_compatible_node(np, "network", "tsi-ethernet")) != NULL; + i++) { + struct resource r[2]; + struct device_node *phy; + hw_info tsi_eth_data; + unsigned int *id; + unsigned int *phy_id; + void *mac_addr; + phandle *ph; + + memset(r, 0, sizeof(r)); + memset(&tsi_eth_data, 0, sizeof(tsi_eth_data)); + + ret = of_address_to_resource(np, 0, &r[0]); + DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n", + __FUNCTION__,r[0].name, r[0].start, r[0].end); + if (ret) + goto err; + + r[1].name = "tx"; + r[1].start = np->intrs[0].line; + r[1].end = np->intrs[0].line; + r[1].flags = IORESOURCE_IRQ; + + tsi_eth_dev = + platform_device_register_simple("tsi-ethernet", i, &r[0], + np->n_intrs + 1); + + if (IS_ERR(tsi_eth_dev)) { + ret = PTR_ERR(tsi_eth_dev); + goto err; + } + + mac_addr = get_property(np, "address", NULL); + memcpy(tsi_eth_data.mac_addr, mac_addr, 6); + + ph = (phandle *) get_property(np, "phy-handle", NULL); + phy = of_find_node_by_phandle(*ph); + + if (phy == NULL) { + ret = -ENODEV; + goto unreg; + } + + id = (u32 *) get_property(phy, "reg", NULL); + phy_id = (u32 *) get_property(phy, "phy-id", NULL); + ret = of_address_to_resource(phy, 0, &res); + if (ret) { + of_node_put(phy); + goto unreg; + } + tsi_eth_data.regs = r[0].start; + tsi_eth_data.phyregs = res.start; + tsi_eth_data.phy = *phy_id; + tsi_eth_data.irq_num = np->intrs[0].line; + of_node_put(phy); + ret = + platform_device_add_data(tsi_eth_dev, &tsi_eth_data, + sizeof(hw_info)); + if (ret) + goto unreg; + } + return 0; +unreg: + platform_device_unregister(tsi_eth_dev); +err: + return ret; +} + +arch_initcall(tsi108_eth_of_init); diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c new file mode 100644 index 000000000000..3265d54c82ed --- /dev/null +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -0,0 +1,412 @@ +/* + * Common routines for Tundra Semiconductor TSI108 host bridge. + * + * 2004-2005 (c) Tundra Semiconductor Corp. + * Author: Alex Bounine (alexandreb@tundra.com) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include + + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#undef DEBUG +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +#define tsi_mk_config_addr(bus, devfunc, offset) \ + ((((bus)<<16) | ((devfunc)<<8) | (offset & 0xfc)) + tsi108_pci_cfg_base) + +u32 tsi108_pci_cfg_base; +u32 tsi108_csr_vir_base; + +extern u32 get_vir_csrbase(void); +extern u32 tsi108_read_reg(u32 reg_offset); +extern void tsi108_write_reg(u32 reg_offset, u32 val); + +int +tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc, + int offset, int len, u32 val) +{ + volatile unsigned char *cfg_addr; + + if (ppc_md.pci_exclude_device) + if (ppc_md.pci_exclude_device(bus->number, devfunc)) + return PCIBIOS_DEVICE_NOT_FOUND; + + cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number, + devfunc, offset) | + (offset & 0x03)); + +#ifdef DEBUG + printk("PCI CFG write : "); + printk("%d:0x%x:0x%x ", bus->number, devfunc, offset); + printk("%d ADDR=0x%08x ", len, (uint) cfg_addr); + printk("data = 0x%08x\n", val); +#endif + + switch (len) { + case 1: + out_8((u8 *) cfg_addr, val); + break; + case 2: + out_le16((u16 *) cfg_addr, val); + break; + default: + out_le32((u32 *) cfg_addr, val); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +void tsi108_clear_pci_error(u32 pci_cfg_base) +{ + u32 err_stat, err_addr, pci_stat; + + /* + * Quietly clear PB and PCI error flags set as result + * of PCI/X configuration read requests. + */ + + /* Read PB Error Log Registers */ + + err_stat = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS); + err_addr = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_AERR); + + if (err_stat & TSI108_PB_ERRCS_ES) { + /* Clear error flag */ + tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS, + TSI108_PB_ERRCS_ES); + + /* Clear read error reported in PB_ISR */ + tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ISR, + TSI108_PB_ISR_PBS_RD_ERR); + + /* Clear PCI/X bus cfg errors if applicable */ + if ((err_addr & 0xFF000000) == pci_cfg_base) { + pci_stat = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR, + pci_stat); + } + } + + return; +} + +#define __tsi108_read_pci_config(x, addr, op) \ + __asm__ __volatile__( \ + " "op" %0,0,%1\n" \ + "1: eieio\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,-1\n" \ + " b 2b\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 1b,3b\n" \ + ".text" \ + : "=r"(x) : "r"(addr)) + +int +tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 * val) +{ + volatile unsigned char *cfg_addr; + u32 temp; + + if (ppc_md.pci_exclude_device) + if (ppc_md.pci_exclude_device(bus->number, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + + cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number, + devfn, + offset) | (offset & + 0x03)); + + switch (len) { + case 1: + __tsi108_read_pci_config(temp, cfg_addr, "lbzx"); + break; + case 2: + __tsi108_read_pci_config(temp, cfg_addr, "lhbrx"); + break; + default: + __tsi108_read_pci_config(temp, cfg_addr, "lwbrx"); + break; + } + + *val = temp; + +#ifdef DEBUG + if ((0xFFFFFFFF != temp) && (0xFFFF != temp) && (0xFF != temp)) { + printk("PCI CFG read : "); + printk("%d:0x%x:0x%x ", bus->number, devfn, offset); + printk("%d ADDR=0x%08x ", len, (uint) cfg_addr); + printk("data = 0x%x\n", *val); + } +#endif + return PCIBIOS_SUCCESSFUL; +} + +void tsi108_clear_pci_cfg_error(void) +{ + tsi108_clear_pci_error(TSI108_PCI_CFG_BASE_PHYS); +} + +static struct pci_ops tsi108_direct_pci_ops = { + tsi108_direct_read_config, + tsi108_direct_write_config +}; + +int __init tsi108_setup_pci(struct device_node *dev) +{ + int len; + struct pci_controller *hose; + struct resource rsrc; + int *bus_range; + int primary = 0, has_address = 0; + + /* PCI Config mapping */ + tsi108_pci_cfg_base = (u32)ioremap(TSI108_PCI_CFG_BASE_PHYS, + TSI108_PCI_CFG_SIZE); + DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __FUNCTION__, + tsi108_pci_cfg_base); + + /* Fetch host bridge registers address */ + has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); + + /* Get bus range if any */ + bus_range = (int *)get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", dev->full_name); + } + + hose = pcibios_alloc_controller(); + + if (!hose) { + printk("PCI Host bridge init failed\n"); + return -ENOMEM; + } + hose->arch_data = dev; + hose->set_cfg_type = 1; + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + (hose)->ops = &tsi108_direct_pci_ops; + + printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. " + "Firmware bus number: %d->%d\n", + rsrc.start, hose->first_busno, hose->last_busno); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, primary); + return 0; +} + +/* + * Low level utility functions + */ + +static void tsi108_pci_int_mask(u_int irq) +{ + u_int irp_cfg; + int int_line = (irq - IRQ_PCI_INTAD_BASE); + + irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); + mb(); + irp_cfg |= (1 << int_line); /* INTx_DIR = output */ + irp_cfg &= ~(3 << (8 + (int_line * 2))); /* INTx_TYPE = unused */ + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg); + mb(); + irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); +} + +static void tsi108_pci_int_unmask(u_int irq) +{ + u_int irp_cfg; + int int_line = (irq - IRQ_PCI_INTAD_BASE); + + irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); + mb(); + irp_cfg &= ~(1 << int_line); + irp_cfg |= (3 << (8 + (int_line * 2))); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg); + mb(); +} + +static void init_pci_source(void) +{ + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, + 0x0000ff00); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE, + TSI108_PCI_IRP_ENABLE_P_INT); + mb(); +} + +static inline int get_pci_source(void) +{ + u_int temp = 0; + int irq = -1; + int i; + u_int pci_irp_stat; + static int mask = 0; + + /* Read PCI/X block interrupt status register */ + pci_irp_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT); + mb(); + + if (pci_irp_stat & TSI108_PCI_IRP_STAT_P_INT) { + /* Process Interrupt from PCI bus INTA# - INTD# lines */ + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + + TSI108_PCI_IRP_INTAD) & 0xf; + mb(); + for (i = 0; i < 4; i++, mask++) { + if (temp & (1 << mask % 4)) { + irq = IRQ_PCI_INTA + mask % 4; + mask++; + break; + } + } + + /* Disable interrupts from PCI block */ + temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE, + temp & ~TSI108_PCI_IRP_ENABLE_P_INT); + mb(); + (void)tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE); + mb(); + } +#ifdef DEBUG + else { + printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n"); + pci_irp_stat = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT); + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_INTAD); + mb(); + printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp); + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); + mb(); + printk("cfg_ctl=0x%08x ", temp); + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE); + mb(); + printk("irp_enable=0x%08x\n", temp); + } +#endif /* end of DEBUG */ + + return irq; +} + + +/* + * Linux descriptor level callbacks + */ + +static void tsi108_pci_irq_enable(u_int irq) +{ + tsi108_pci_int_unmask(irq); +} + +static void tsi108_pci_irq_disable(u_int irq) +{ + tsi108_pci_int_mask(irq); +} + +static void tsi108_pci_irq_ack(u_int irq) +{ + tsi108_pci_int_mask(irq); +} + +static void tsi108_pci_irq_end(u_int irq) +{ + tsi108_pci_int_unmask(irq); + + /* Enable interrupts from PCI block */ + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE, + tsi108_read_reg(TSI108_PCI_OFFSET + + TSI108_PCI_IRP_ENABLE) | + TSI108_PCI_IRP_ENABLE_P_INT); + mb(); +} + +/* + * Interrupt controller descriptor for cascaded PCI interrupt controller. + */ + +struct hw_interrupt_type tsi108_pci_irq = { + .typename = "tsi108_PCI_int", + .enable = tsi108_pci_irq_enable, + .disable = tsi108_pci_irq_disable, + .ack = tsi108_pci_irq_ack, + .end = tsi108_pci_irq_end, +}; + +/* + * Exported functions + */ + +/* + * The Tsi108 PCI interrupts initialization routine. + * + * The INTA# - INTD# interrupts on the PCI bus are reported by the PCI block + * to the MPIC using single interrupt source (IRQ_TSI108_PCI). Therefore the + * PCI block has to be treated as a cascaded interrupt controller connected + * to the MPIC. + */ + +void __init tsi108_pci_int_init(void) +{ + u_int i; + + DBG("Tsi108_pci_int_init: initializing PCI interrupts\n"); + + for (i = 0; i < NUM_PCI_IRQS; i++) { + irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq; + irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL; + } + + init_pci_source(); +} + +int tsi108_irq_cascade(struct pt_regs *regs, void *unused) +{ + return get_pci_source(); +} diff --git a/include/asm-powerpc/tsi108.h b/include/asm-powerpc/tsi108.h new file mode 100644 index 000000000000..c4c278d72f71 --- /dev/null +++ b/include/asm-powerpc/tsi108.h @@ -0,0 +1,109 @@ +/* + * include/asm-ppc/tsi108.h + * + * common routine and memory layout for Tundra TSI108(Grendel) host bridge + * memory controller. + * + * Author: Jacob Pan (jacob.pan@freescale.com) + * Alex Bounine (alexandreb@tundra.com) + * 2004 (c) Freescale Semiconductor Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __PPC_KERNEL_TSI108_H +#define __PPC_KERNEL_TSI108_H + +#include + +/* Size of entire register space */ +#define TSI108_REG_SIZE (0x10000) + +/* Sizes of register spaces for individual blocks */ +#define TSI108_HLP_SIZE 0x1000 +#define TSI108_PCI_SIZE 0x1000 +#define TSI108_CLK_SIZE 0x1000 +#define TSI108_PB_SIZE 0x1000 +#define TSI108_SD_SIZE 0x1000 +#define TSI108_DMA_SIZE 0x1000 +#define TSI108_ETH_SIZE 0x1000 +#define TSI108_I2C_SIZE 0x400 +#define TSI108_MPIC_SIZE 0x400 +#define TSI108_UART0_SIZE 0x200 +#define TSI108_GPIO_SIZE 0x200 +#define TSI108_UART1_SIZE 0x200 + +/* Offsets within Tsi108(A) CSR space for individual blocks */ +#define TSI108_HLP_OFFSET 0x0000 +#define TSI108_PCI_OFFSET 0x1000 +#define TSI108_CLK_OFFSET 0x2000 +#define TSI108_PB_OFFSET 0x3000 +#define TSI108_SD_OFFSET 0x4000 +#define TSI108_DMA_OFFSET 0x5000 +#define TSI108_ETH_OFFSET 0x6000 +#define TSI108_I2C_OFFSET 0x7000 +#define TSI108_MPIC_OFFSET 0x7400 +#define TSI108_UART0_OFFSET 0x7800 +#define TSI108_GPIO_OFFSET 0x7A00 +#define TSI108_UART1_OFFSET 0x7C00 + +/* Tsi108 registers used by common code components */ +#define TSI108_PCI_CSR (0x004) +#define TSI108_PCI_IRP_CFG_CTL (0x180) +#define TSI108_PCI_IRP_STAT (0x184) +#define TSI108_PCI_IRP_ENABLE (0x188) +#define TSI108_PCI_IRP_INTAD (0x18C) + +#define TSI108_PCI_IRP_STAT_P_INT (0x00400000) +#define TSI108_PCI_IRP_ENABLE_P_INT (0x00400000) + +#define TSI108_CG_PWRUP_STATUS (0x234) + +#define TSI108_PB_ISR (0x00C) +#define TSI108_PB_ERRCS (0x404) +#define TSI108_PB_AERR (0x408) + +#define TSI108_PB_ERRCS_ES (1 << 1) +#define TSI108_PB_ISR_PBS_RD_ERR (1 << 8) + +#define TSI108_PCI_CFG_BASE_PHYS (0xfb000000) +#define TSI108_PCI_CFG_SIZE (0x01000000) +/* Global variables */ + +extern u32 tsi108_pci_cfg_base; +/* Exported functions */ + +extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base); +extern unsigned long tsi108_get_mem_size(void); +extern unsigned long tsi108_get_cpu_clk(void); +extern unsigned long tsi108_get_sdc_clk(void); +extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val); +extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 * val); +extern void tsi108_clear_pci_error(u32 pci_cfg_base); + +extern phys_addr_t get_csrbase(void); + +typedef struct { + u32 regs; /* hw registers base address */ + u32 phyregs; /* phy registers base address */ + u16 phy; /* phy address */ + u16 irq_num; /* irq number */ + u8 mac_addr[6]; /* phy mac address */ +} hw_info; + +extern u32 get_vir_csrbase(void); +extern u32 tsi108_csr_vir_base; + +extern inline u32 tsi108_read_reg(u32 reg_offset) +{ + return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset)); +} + +extern inline void tsi108_write_reg(u32 reg_offset, u32 val) +{ + out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val); +} + +#endif /* __PPC_KERNEL_TSI108_H */ From 975b365895b638a62da55f9fb180b0a71d05874d Mon Sep 17 00:00:00 2001 From: Zang Roy-r61911 Date: Tue, 13 Jun 2006 15:07:29 +0800 Subject: [PATCH 37/43] [POWERPC] mpc7448hpc2 (taiga) board config file Add default config for mpc7448 hpc2 (taiga) board. Signed-off-by: Roy Zang Signed-off-by: Paul Mackerras --- arch/powerpc/configs/mpc7448_hpc2_defconfig | 923 ++++++++++++++++++++ 1 file changed, 923 insertions(+) create mode 100644 arch/powerpc/configs/mpc7448_hpc2_defconfig diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig new file mode 100644 index 000000000000..15a50f4ceb1f --- /dev/null +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -0,0 +1,923 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.17-rc4 +# Sat May 27 18:45:55 2006 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +CONFIG_CLASSIC32=y +# CONFIG_PPC_52xx is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Platform support +# +# CONFIG_PPC_MULTIPLATFORM is not set +# CONFIG_PPC_ISERIES is not set +CONFIG_EMBEDDED6xx=y +# CONFIG_APUS is not set +CONFIG_MPIC=y +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_KATANA is not set +# CONFIG_WILLOW is not set +# CONFIG_CPCI690 is not set +# CONFIG_POWERPMC250 is not set +# CONFIG_CHESTNUT is not set +# CONFIG_SPRUCE is not set +# CONFIG_HDPU is not set +# CONFIG_EV64260 is not set +# CONFIG_LOPEC is not set +# CONFIG_MVME5100 is not set +# CONFIG_PPLUS is not set +# CONFIG_PRPMC750 is not set +# CONFIG_PRPMC800 is not set +# CONFIG_SANDPOINT is not set +CONFIG_MPC7448HPC2=y +# CONFIG_RADSTONE_PPC7D is not set +# CONFIG_PAL4 is not set +# CONFIG_GEMINI is not set +# CONFIG_EST8260 is not set +# CONFIG_SBC82xx is not set +# CONFIG_SBS8260 is not set +# CONFIG_RPX8260 is not set +# CONFIG_TQM8260 is not set +# CONFIG_ADS8272 is not set +# CONFIG_PQ2FADS is not set +# CONFIG_LITE5200 is not set +# CONFIG_EV64360 is not set +CONFIG_TSI108_BRIDGE=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_INDIRECT_PCI is not set +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +CONFIG_SCSI_SATA=y +# CONFIG_SCSI_SATA_AHCI is not set +# CONFIG_SCSI_SATA_SVW is not set +# CONFIG_SCSI_ATA_PIIX is not set +CONFIG_SCSI_SATA_MV=y +# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_PDC_ADMA is not set +# CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_SX4 is not set +# CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +# CONFIG_SCSI_SATA_VIA is not set +# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_TSI108_ETH=y + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# From f86c9747fe1cd72b2c5c6bdf72d17aeb2a3c6cb0 Mon Sep 17 00:00:00 2001 From: Sonny Rao Date: Tue, 27 Jun 2006 08:46:09 -0400 Subject: [PATCH 38/43] [POWERPC] Fix idr locking in init_new_context We always need to serialize accesses to mmu_context_idr. I hit this bug when testing with a small number of mmu contexts. Signed-off-by: Sonny Rao Signed-off-by: Paul Mackerras --- arch/powerpc/mm/mmu_context_64.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/mm/mmu_context_64.c b/arch/powerpc/mm/mmu_context_64.c index 65d18dca266f..e2051efa09c5 100644 --- a/arch/powerpc/mm/mmu_context_64.c +++ b/arch/powerpc/mm/mmu_context_64.c @@ -44,7 +44,9 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm) return err; if (index > MAX_CONTEXT) { + spin_lock(&mmu_context_lock); idr_remove(&mmu_context_idr, index); + spin_unlock(&mmu_context_lock); return -ENOMEM; } From 16e9f994442b599987ce5dd4a5ebe50865e6573d Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 29 Jun 2006 15:07:42 +1000 Subject: [PATCH 39/43] [POWERPC] Make lparcfg.c work when both iseries and pseries are selected This also consolidates the initial bits of lparcfg_data() and adds the partition number to the iSeries flattened device tree. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/lparcfg.c | 147 ++++++++++++++-------------- arch/powerpc/platforms/iseries/dt.c | 2 + 2 files changed, 78 insertions(+), 71 deletions(-) diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index c02deaab26c7..73edc3c16137 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -45,11 +45,9 @@ static struct proc_dir_entry *proc_ppc64_lparcfg; #define LPARCFG_BUFF_SIZE 4096 -#ifdef CONFIG_PPC_ISERIES - /* - * For iSeries legacy systems, the PPA purr function is available from the - * emulated_time_base field in the paca. + * Track sum of all purrs across all processors. This is used to further + * calculate usage values by different applications */ static unsigned long get_purr(void) { @@ -57,48 +55,31 @@ static unsigned long get_purr(void) int cpu; for_each_possible_cpu(cpu) { - sum_purr += lppaca[cpu].emulated_time_base; + if (firmware_has_feature(FW_FEATURE_ISERIES)) + sum_purr += lppaca[cpu].emulated_time_base; + else { + struct cpu_usage *cu; -#ifdef PURR_DEBUG - printk(KERN_INFO "get_purr for cpu (%d) has value (%ld) \n", - cpu, lppaca[cpu].emulated_time_base); -#endif + cu = &per_cpu(cpu_usage_array, cpu); + sum_purr += cu->current_tb; + } } return sum_purr; } -#define lparcfg_write NULL +#ifdef CONFIG_PPC_ISERIES /* * Methods used to fetch LPAR data when running on an iSeries platform. */ -static int lparcfg_data(struct seq_file *m, void *v) +static int iseries_lparcfg_data(struct seq_file *m, void *v) { - unsigned long pool_id, lp_index; + unsigned long pool_id; int shared, entitled_capacity, max_entitled_capacity; int processors, max_processors; unsigned long purr = get_purr(); - seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS); - shared = (int)(get_lppaca()->shared_proc); - seq_printf(m, "serial_number=%c%c%c%c%c%c%c\n", - e2a(xItExtVpdPanel.mfgID[2]), - e2a(xItExtVpdPanel.mfgID[3]), - e2a(xItExtVpdPanel.systemSerial[1]), - e2a(xItExtVpdPanel.systemSerial[2]), - e2a(xItExtVpdPanel.systemSerial[3]), - e2a(xItExtVpdPanel.systemSerial[4]), - e2a(xItExtVpdPanel.systemSerial[5])); - - seq_printf(m, "system_type=%c%c%c%c\n", - e2a(xItExtVpdPanel.machineType[0]), - e2a(xItExtVpdPanel.machineType[1]), - e2a(xItExtVpdPanel.machineType[2]), - e2a(xItExtVpdPanel.machineType[3])); - - lp_index = HvLpConfig_getLpIndex(); - seq_printf(m, "partition_id=%d\n", (int)lp_index); seq_printf(m, "system_active_processors=%d\n", (int)HvLpConfig_getSystemPhysicalProcessors()); @@ -137,6 +118,14 @@ static int lparcfg_data(struct seq_file *m, void *v) return 0; } + +#else /* CONFIG_PPC_ISERIES */ + +static int iseries_lparcfg_data(struct seq_file *m, void *v) +{ + return 0; +} + #endif /* CONFIG_PPC_ISERIES */ #ifdef CONFIG_PPC_PSERIES @@ -213,22 +202,6 @@ static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs) log_plpar_hcall_return(rc, "H_PIC"); } -/* Track sum of all purrs across all processors. This is used to further */ -/* calculate usage values by different applications */ - -static unsigned long get_purr(void) -{ - unsigned long sum_purr = 0; - int cpu; - struct cpu_usage *cu; - - for_each_possible_cpu(cpu) { - cu = &per_cpu(cpu_usage_array, cpu); - sum_purr += cu->current_tb; - } - return sum_purr; -} - #define SPLPAR_CHARACTERISTICS_TOKEN 20 #define SPLPAR_MAXLENGTH 1026*(sizeof(char)) @@ -333,35 +306,13 @@ static int lparcfg_count_active_processors(void) return count; } -static int lparcfg_data(struct seq_file *m, void *v) +static int pseries_lparcfg_data(struct seq_file *m, void *v) { int partition_potential_processors; int partition_active_processors; - struct device_node *rootdn; - const char *model = ""; - const char *system_id = ""; - unsigned int *lp_index_ptr, lp_index = 0; struct device_node *rtas_node; int *lrdrp = NULL; - rootdn = find_path_device("/"); - if (rootdn) { - model = get_property(rootdn, "model", NULL); - system_id = get_property(rootdn, "system-id", NULL); - lp_index_ptr = (unsigned int *) - get_property(rootdn, "ibm,partition-no", NULL); - if (lp_index_ptr) - lp_index = *lp_index_ptr; - } - - seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS); - - seq_printf(m, "serial_number=%s\n", system_id); - - seq_printf(m, "system_type=%s\n", model); - - seq_printf(m, "partition_id=%d\n", (int)lp_index); - rtas_node = find_path_device("/rtas"); if (rtas_node) lrdrp = (int *)get_property(rtas_node, "ibm,lrdr-capacity", @@ -549,8 +500,61 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf, return retval; } +#else /* CONFIG_PPC_PSERIES */ + +static int pseries_lparcfg_data(struct seq_file *m, void *v) +{ + return 0; +} + +static ssize_t lparcfg_write(struct file *file, const char __user * buf, + size_t count, loff_t * off) +{ + return count; +} + #endif /* CONFIG_PPC_PSERIES */ +static int lparcfg_data(struct seq_file *m, void *v) +{ + struct device_node *rootdn; + const char *model = ""; + const char *system_id = ""; + const char *tmp; + unsigned int *lp_index_ptr, lp_index = 0; + + seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS); + + rootdn = find_path_device("/"); + if (rootdn) { + tmp = get_property(rootdn, "model", NULL); + if (tmp) { + model = tmp; + /* Skip "IBM," - see platforms/iseries/dt.c */ + if (firmware_has_feature(FW_FEATURE_ISERIES)) + model += 4; + } + tmp = get_property(rootdn, "system-id", NULL); + if (tmp) { + system_id = tmp; + /* Skip "IBM," - see platforms/iseries/dt.c */ + if (firmware_has_feature(FW_FEATURE_ISERIES)) + system_id += 4; + } + lp_index_ptr = (unsigned int *) + get_property(rootdn, "ibm,partition-no", NULL); + if (lp_index_ptr) + lp_index = *lp_index_ptr; + } + seq_printf(m, "serial_number=%s\n", system_id); + seq_printf(m, "system_type=%s\n", model); + seq_printf(m, "partition_id=%d\n", (int)lp_index); + + if (firmware_has_feature(FW_FEATURE_ISERIES)) + return iseries_lparcfg_data(m, v); + return pseries_lparcfg_data(m, v); +} + static int lparcfg_open(struct inode *inode, struct file *file) { return single_open(file, lparcfg_data, NULL); @@ -569,7 +573,8 @@ int __init lparcfg_init(void) mode_t mode = S_IRUSR | S_IRGRP | S_IROTH; /* Allow writing if we have FW_FEATURE_SPLPAR */ - if (firmware_has_feature(FW_FEATURE_SPLPAR)) { + if (firmware_has_feature(FW_FEATURE_SPLPAR) && + !firmware_has_feature(FW_FEATURE_ISERIES)) { lparcfg_fops.write = lparcfg_write; mode |= S_IWUSR; } diff --git a/arch/powerpc/platforms/iseries/dt.c b/arch/powerpc/platforms/iseries/dt.c index d3444aabe76e..d194140c1ebf 100644 --- a/arch/powerpc/platforms/iseries/dt.c +++ b/arch/powerpc/platforms/iseries/dt.c @@ -252,6 +252,7 @@ static void __init dt_model(struct iseries_flat_dt *dt) { char buf[16] = "IBM,"; + /* N.B. lparcfg.c knows about the "IBM," prefixes ... */ /* "IBM," + mfgId[2:3] + systemSerial[1:5] */ strne2a(buf + 4, xItExtVpdPanel.mfgID + 2, 2); strne2a(buf + 6, xItExtVpdPanel.systemSerial + 1, 5); @@ -264,6 +265,7 @@ static void __init dt_model(struct iseries_flat_dt *dt) dt_prop_str(dt, "model", buf); dt_prop_str(dt, "compatible", "IBM,iSeries"); + dt_prop_u32(dt, "ibm,partition-no", HvLpConfig_getLpIndex()); } static void __init dt_do_vdevice(struct iseries_flat_dt *dt, From c220153654ede57b41900159eb8d1f6029d85642 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 28 Jun 2006 14:13:20 -0700 Subject: [PATCH 40/43] [POWERPC] todc: add support for Time-Of-Day-Clock This is a resubmit with a proper subject and with all comments addressed. Applies cleanly to powerpc.git 649e85797259162f7fdc696420e7492f20226f2d Mark -- The todc code from arch/ppc supports many todc/rtc chips and is needed in arch/powerpc. This patch adds the todc code to arch/powerpc. Signed-off-by: Mark A. Greer -- arch/powerpc/Kconfig | 7 arch/powerpc/sysdev/Makefile | 1 arch/powerpc/sysdev/todc.c | 392 ++++++++++++++++++++++++++++++++++ include/asm-powerpc/todc.h | 487 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 887 insertions(+) -- Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 7 + arch/powerpc/sysdev/Makefile | 1 + arch/powerpc/sysdev/todc.c | 392 ++++++++++++++++++++++++++++ include/asm-powerpc/todc.h | 487 +++++++++++++++++++++++++++++++++++ 4 files changed, 887 insertions(+) create mode 100644 arch/powerpc/sysdev/todc.c create mode 100644 include/asm-powerpc/todc.h diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 0b5e225c2d51..e898da2381aa 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -563,6 +563,13 @@ config TAU_AVERAGE /proc/cpuinfo. If in doubt, say N here. + +config PPC_TODC + depends on EMBEDDED6xx + bool "Generic Time-of-day Clock (TODC) support" + ---help--- + This adds support for many TODC/RTC chips. + endmenu source arch/powerpc/platforms/embedded6xx/Kconfig diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 63e81e74b45e..054bd8b41ef5 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -12,4 +12,5 @@ obj-$(CONFIG_U3_DART) += dart_iommu.o obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_PPC_83xx) += ipic.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o +obj-$(CONFIG_PPC_TODC) += todc.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o diff --git a/arch/powerpc/sysdev/todc.c b/arch/powerpc/sysdev/todc.c new file mode 100644 index 000000000000..0a65980efb50 --- /dev/null +++ b/arch/powerpc/sysdev/todc.c @@ -0,0 +1,392 @@ +/* + * Time of Day Clock support for the M48T35, M48T37, M48T59, and MC146818 + * Real Time Clocks/Timekeepers. + * + * Author: Mark A. Greer + * + * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* + * Depending on the hardware on your board and your board design, the + * RTC/NVRAM may be accessed either directly (like normal memory) or via + * address/data registers. If your board uses the direct method, set + * 'nvram_data' to the base address of your nvram and leave 'nvram_as0' and + * 'nvram_as1' NULL. If your board uses address/data regs to access nvram, + * set 'nvram_as0' to the address of the lower byte, set 'nvram_as1' to the + * address of the upper byte (leave NULL if using mc146818), and set + * 'nvram_data' to the address of the 8-bit data register. + * + * Note: Even though the documentation for the various RTC chips say that it + * take up to a second before it starts updating once the 'R' bit is + * cleared, they always seem to update even though we bang on it many + * times a second. This is true, except for the Dallas Semi 1746/1747 + * (possibly others). Those chips seem to have a real problem whenever + * we set the 'R' bit before reading them, they basically stop counting. + * --MAG + */ + +/* + * 'todc_info' should be initialized in your *_setup.c file to + * point to a fully initialized 'todc_info_t' structure. + * This structure holds all the register offsets for your particular + * TODC/RTC chip. + * TODC_ALLOC()/TODC_INIT() will allocate and initialize this table for you. + */ + +#ifdef RTC_FREQ_SELECT +#undef RTC_FREQ_SELECT +#define RTC_FREQ_SELECT control_b /* Register A */ +#endif + +#ifdef RTC_CONTROL +#undef RTC_CONTROL +#define RTC_CONTROL control_a /* Register B */ +#endif + +#ifdef RTC_INTR_FLAGS +#undef RTC_INTR_FLAGS +#define RTC_INTR_FLAGS watchdog /* Register C */ +#endif + +#ifdef RTC_VALID +#undef RTC_VALID +#define RTC_VALID interrupts /* Register D */ +#endif + +/* Access routines when RTC accessed directly (like normal memory) */ +u_char +todc_direct_read_val(int addr) +{ + return readb((void __iomem *)(todc_info->nvram_data + addr)); +} + +void +todc_direct_write_val(int addr, unsigned char val) +{ + writeb(val, (void __iomem *)(todc_info->nvram_data + addr)); + return; +} + +/* Access routines for accessing m48txx type chips via addr/data regs */ +u_char +todc_m48txx_read_val(int addr) +{ + outb(addr, todc_info->nvram_as0); + outb(addr>>todc_info->as0_bits, todc_info->nvram_as1); + return inb(todc_info->nvram_data); +} + +void +todc_m48txx_write_val(int addr, unsigned char val) +{ + outb(addr, todc_info->nvram_as0); + outb(addr>>todc_info->as0_bits, todc_info->nvram_as1); + outb(val, todc_info->nvram_data); + return; +} + +/* Access routines for accessing mc146818 type chips via addr/data regs */ +u_char +todc_mc146818_read_val(int addr) +{ + outb_p(addr, todc_info->nvram_as0); + return inb_p(todc_info->nvram_data); +} + +void +todc_mc146818_write_val(int addr, unsigned char val) +{ + outb_p(addr, todc_info->nvram_as0); + outb_p(val, todc_info->nvram_data); +} + + +/* + * Routines to make RTC chips with NVRAM buried behind an addr/data pair + * have the NVRAM and clock regs appear at the same level. + * The NVRAM will appear to start at addr 0 and the clock regs will appear + * to start immediately after the NVRAM (actually, start at offset + * todc_info->nvram_size). + */ +static inline u_char +todc_read_val(int addr) +{ + u_char val; + + if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) { + if (addr < todc_info->nvram_size) { /* NVRAM */ + ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr); + val = ppc_md.rtc_read_val(todc_info->nvram_data_reg); + } else { /* Clock Reg */ + addr -= todc_info->nvram_size; + val = ppc_md.rtc_read_val(addr); + } + } else + val = ppc_md.rtc_read_val(addr); + + return val; +} + +static inline void +todc_write_val(int addr, u_char val) +{ + if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) { + if (addr < todc_info->nvram_size) { /* NVRAM */ + ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr); + ppc_md.rtc_write_val(todc_info->nvram_data_reg, val); + } else { /* Clock Reg */ + addr -= todc_info->nvram_size; + ppc_md.rtc_write_val(addr, val); + } + } else + ppc_md.rtc_write_val(addr, val); +} + +/* + * TODC routines + * + * There is some ugly stuff in that there are assumptions for the mc146818. + * + * Assumptions: + * - todc_info->control_a has the offset as mc146818 Register B reg + * - todc_info->control_b has the offset as mc146818 Register A reg + * - m48txx control reg's write enable or 'W' bit is same as + * mc146818 Register B 'SET' bit (i.e., 0x80) + * + * These assumptions were made to make the code simpler. + */ +long __init +todc_time_init(void) +{ + u_char cntl_b; + + if (!ppc_md.rtc_read_val) + ppc_md.rtc_read_val = ppc_md.nvram_read_val; + if (!ppc_md.rtc_write_val) + ppc_md.rtc_write_val = ppc_md.nvram_write_val; + + cntl_b = todc_read_val(todc_info->control_b); + + if (todc_info->rtc_type == TODC_TYPE_MC146818) { + if ((cntl_b & 0x70) != 0x20) { + printk(KERN_INFO "TODC real-time-clock was stopped." + " Now starting..."); + cntl_b &= ~0x70; + cntl_b |= 0x20; + } + + todc_write_val(todc_info->control_b, cntl_b); + } else if (todc_info->rtc_type == TODC_TYPE_DS17285) { + u_char mode; + + mode = todc_read_val(TODC_TYPE_DS17285_CNTL_A); + /* Make sure countdown clear is not set */ + mode &= ~0x40; + /* Enable oscillator, extended register set */ + mode |= 0x30; + todc_write_val(TODC_TYPE_DS17285_CNTL_A, mode); + + } else if (todc_info->rtc_type == TODC_TYPE_DS1501) { + u_char month; + + todc_info->enable_read = TODC_DS1501_CNTL_B_TE; + todc_info->enable_write = TODC_DS1501_CNTL_B_TE; + + month = todc_read_val(todc_info->month); + + if ((month & 0x80) == 0x80) { + printk(KERN_INFO "TODC %s %s\n", + "real-time-clock was stopped.", + "Now starting..."); + month &= ~0x80; + todc_write_val(todc_info->month, month); + } + + cntl_b &= ~TODC_DS1501_CNTL_B_TE; + todc_write_val(todc_info->control_b, cntl_b); + } else { /* must be a m48txx type */ + u_char cntl_a; + + todc_info->enable_read = TODC_MK48TXX_CNTL_A_R; + todc_info->enable_write = TODC_MK48TXX_CNTL_A_W; + + cntl_a = todc_read_val(todc_info->control_a); + + /* Check & clear STOP bit in control B register */ + if (cntl_b & TODC_MK48TXX_DAY_CB) { + printk(KERN_INFO "TODC %s %s\n", + "real-time-clock was stopped.", + "Now starting..."); + + cntl_a |= todc_info->enable_write; + cntl_b &= ~TODC_MK48TXX_DAY_CB;/* Start Oscil */ + + todc_write_val(todc_info->control_a, cntl_a); + todc_write_val(todc_info->control_b, cntl_b); + } + + /* Make sure READ & WRITE bits are cleared. */ + cntl_a &= ~(todc_info->enable_write | todc_info->enable_read); + todc_write_val(todc_info->control_a, cntl_a); + } + + return 0; +} + +/* + * There is some ugly stuff in that there are assumptions that for a mc146818, + * the todc_info->control_a has the offset of the mc146818 Register B reg and + * that the register'ss 'SET' bit is the same as the m48txx's write enable + * bit in the control register of the m48txx (i.e., 0x80). + * + * It was done to make the code look simpler. + */ +void +todc_get_rtc_time(struct rtc_time *tm) +{ + uint year = 0, mon = 0, mday = 0, hour = 0, min = 0, sec = 0; + uint limit, i; + u_char save_control, uip = 0; + extern void GregorianDay(struct rtc_time *); + + spin_lock(&rtc_lock); + save_control = todc_read_val(todc_info->control_a); + + if (todc_info->rtc_type != TODC_TYPE_MC146818) { + limit = 1; + + switch (todc_info->rtc_type) { + case TODC_TYPE_DS1553: + case TODC_TYPE_DS1557: + case TODC_TYPE_DS1743: + case TODC_TYPE_DS1746: /* XXXX BAD HACK -> FIX */ + case TODC_TYPE_DS1747: + case TODC_TYPE_DS17285: + break; + default: + todc_write_val(todc_info->control_a, + (save_control | todc_info->enable_read)); + } + } else + limit = 100000000; + + for (i=0; irtc_type == TODC_TYPE_MC146818) + uip = todc_read_val(todc_info->RTC_FREQ_SELECT); + + sec = todc_read_val(todc_info->seconds) & 0x7f; + min = todc_read_val(todc_info->minutes) & 0x7f; + hour = todc_read_val(todc_info->hours) & 0x3f; + mday = todc_read_val(todc_info->day_of_month) & 0x3f; + mon = todc_read_val(todc_info->month) & 0x1f; + year = todc_read_val(todc_info->year) & 0xff; + + if (todc_info->rtc_type == TODC_TYPE_MC146818) { + uip |= todc_read_val(todc_info->RTC_FREQ_SELECT); + if ((uip & RTC_UIP) == 0) + break; + } + } + + if (todc_info->rtc_type != TODC_TYPE_MC146818) { + switch (todc_info->rtc_type) { + case TODC_TYPE_DS1553: + case TODC_TYPE_DS1557: + case TODC_TYPE_DS1743: + case TODC_TYPE_DS1746: /* XXXX BAD HACK -> FIX */ + case TODC_TYPE_DS1747: + case TODC_TYPE_DS17285: + break; + default: + save_control &= ~(todc_info->enable_read); + todc_write_val(todc_info->control_a, save_control); + } + } + spin_unlock(&rtc_lock); + + if ((todc_info->rtc_type != TODC_TYPE_MC146818) + || ((save_control & RTC_DM_BINARY) == 0) + || RTC_ALWAYS_BCD) { + BCD_TO_BIN(sec); + BCD_TO_BIN(min); + BCD_TO_BIN(hour); + BCD_TO_BIN(mday); + BCD_TO_BIN(mon); + BCD_TO_BIN(year); + } + + if ((year + 1900) < 1970) { + year += 100; + } + + tm->tm_sec = sec; + tm->tm_min = min; + tm->tm_hour = hour; + tm->tm_mday = mday; + tm->tm_mon = mon; + tm->tm_year = year; + + GregorianDay(tm); +} + +int +todc_set_rtc_time(struct rtc_time *tm) +{ + u_char save_control, save_freq_select = 0; + + spin_lock(&rtc_lock); + save_control = todc_read_val(todc_info->control_a); + + /* Assuming MK48T59_RTC_CA_WRITE & RTC_SET are equal */ + todc_write_val(todc_info->control_a, + (save_control | todc_info->enable_write)); + save_control &= ~(todc_info->enable_write); /* in case it was set */ + + if (todc_info->rtc_type == TODC_TYPE_MC146818) { + save_freq_select = todc_read_val(todc_info->RTC_FREQ_SELECT); + todc_write_val(todc_info->RTC_FREQ_SELECT, + save_freq_select | RTC_DIV_RESET2); + } + + if ((todc_info->rtc_type != TODC_TYPE_MC146818) + || ((save_control & RTC_DM_BINARY) == 0) + || RTC_ALWAYS_BCD) { + BIN_TO_BCD(tm->tm_sec); + BIN_TO_BCD(tm->tm_min); + BIN_TO_BCD(tm->tm_hour); + BIN_TO_BCD(tm->tm_mon); + BIN_TO_BCD(tm->tm_mday); + BIN_TO_BCD(tm->tm_year); + } + + todc_write_val(todc_info->seconds, tm->tm_sec); + todc_write_val(todc_info->minutes, tm->tm_min); + todc_write_val(todc_info->hours, tm->tm_hour); + todc_write_val(todc_info->month, tm->tm_mon); + todc_write_val(todc_info->day_of_month, tm->tm_mday); + todc_write_val(todc_info->year, tm->tm_year); + + todc_write_val(todc_info->control_a, save_control); + + if (todc_info->rtc_type == TODC_TYPE_MC146818) + todc_write_val(todc_info->RTC_FREQ_SELECT, save_freq_select); + + spin_unlock(&rtc_lock); + return 0; +} diff --git a/include/asm-powerpc/todc.h b/include/asm-powerpc/todc.h new file mode 100644 index 000000000000..60a8c39b8c11 --- /dev/null +++ b/include/asm-powerpc/todc.h @@ -0,0 +1,487 @@ +/* + * Definitions for the M48Txx and mc146818 series of Time of day/Real Time + * Clock chips. + * + * Author: Mark A. Greer + * + * 2001 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +/* + * Support for the M48T37/M48T59/.../mc146818 Real Time Clock chips. + * Purpose is to make one generic file that handles all of these chips instead + * of every platform implementing the same code over & over again. + */ + +#ifndef __PPC_KERNEL_TODC_H +#define __PPC_KERNEL_TODC_H + +typedef struct { + uint rtc_type; /* your particular chip */ + + /* + * Following are the addresses of the AS0, AS1, and DATA registers + * of these chips. Note that these are board-specific. + */ + unsigned int nvram_as0; + unsigned int nvram_as1; + unsigned int nvram_data; + + /* + * Define bits to stop external set of regs from changing so + * the chip can be read/written reliably. + */ + unsigned char enable_read; + unsigned char enable_write; + + /* + * Following is the number of AS0 address bits. This is normally + * 8 but some bad hardware routes address lines incorrectly. + */ + int as0_bits; + + int nvram_size; /* Size of NVRAM on chip */ + int sw_flags; /* Software control flags */ + + /* Following are the register offsets for the particular chip */ + int year; + int month; + int day_of_month; + int day_of_week; + int hours; + int minutes; + int seconds; + int control_b; + int control_a; + int watchdog; + int interrupts; + int alarm_date; + int alarm_hour; + int alarm_minutes; + int alarm_seconds; + int century; + int flags; + + /* + * Some RTC chips have their NVRAM buried behind a addr/data pair of + * regs on the first level/clock registers. The following fields + * are the addresses for those addr/data regs. + */ + int nvram_addr_reg; + int nvram_data_reg; +} todc_info_t; + +/* + * Define the types of TODC/RTC variants that are supported in + * arch/ppc/kernel/todc_time.c + * Make a new one of these for any chip somehow differs from what's already + * defined. That way, if you ever need to put in code to touch those + * bits/registers in todc_time.c, you can put it inside an + * 'if (todc_info->rtc_type == TODC_TYPE_XXX)' so you won't break + * anyone else. + */ +#define TODC_TYPE_MK48T35 1 +#define TODC_TYPE_MK48T37 2 +#define TODC_TYPE_MK48T59 3 +#define TODC_TYPE_DS1693 4 /* Dallas DS1693 RTC */ +#define TODC_TYPE_DS1743 5 /* Dallas DS1743 RTC */ +#define TODC_TYPE_DS1746 6 /* Dallas DS1746 RTC */ +#define TODC_TYPE_DS1747 7 /* Dallas DS1747 RTC */ +#define TODC_TYPE_DS1501 8 /* Dallas DS1501 RTC */ +#define TODC_TYPE_DS1643 9 /* Dallas DS1643 RTC */ +#define TODC_TYPE_PC97307 10 /* PC97307 internal RTC */ +#define TODC_TYPE_DS1557 11 /* Dallas DS1557 RTC */ +#define TODC_TYPE_DS17285 12 /* Dallas DS17285 RTC */ +#define TODC_TYPE_DS1553 13 /* Dallas DS1553 RTC */ +#define TODC_TYPE_MC146818 100 /* Leave room for m48txx's */ + +/* + * Bit to clear/set to enable reads/writes to the chip + */ +#define TODC_MK48TXX_CNTL_A_R 0x40 +#define TODC_MK48TXX_CNTL_A_W 0x80 +#define TODC_MK48TXX_DAY_CB 0x80 + +#define TODC_DS1501_CNTL_B_TE 0x80 + +/* + * Define flag bits used by todc routines. + */ +#define TODC_FLAG_2_LEVEL_NVRAM 0x00000001 + +/* + * Define the values for the various RTC's that should to into the todc_info + * table. + * Note: The XXX_NVRAM_SIZE, XXX_NVRAM_ADDR_REG, and XXX_NVRAM_DATA_REG only + * matter if XXX_SW_FLAGS has TODC_FLAG_2_LEVEL_NVRAM set. + */ +#define TODC_TYPE_MK48T35_NVRAM_SIZE 0x7ff8 +#define TODC_TYPE_MK48T35_SW_FLAGS 0 +#define TODC_TYPE_MK48T35_YEAR 0x7fff +#define TODC_TYPE_MK48T35_MONTH 0x7ffe +#define TODC_TYPE_MK48T35_DOM 0x7ffd /* Day of Month */ +#define TODC_TYPE_MK48T35_DOW 0x7ffc /* Day of Week */ +#define TODC_TYPE_MK48T35_HOURS 0x7ffb +#define TODC_TYPE_MK48T35_MINUTES 0x7ffa +#define TODC_TYPE_MK48T35_SECONDS 0x7ff9 +#define TODC_TYPE_MK48T35_CNTL_B 0x7ff9 +#define TODC_TYPE_MK48T35_CNTL_A 0x7ff8 +#define TODC_TYPE_MK48T35_WATCHDOG 0x0000 +#define TODC_TYPE_MK48T35_INTERRUPTS 0x0000 +#define TODC_TYPE_MK48T35_ALARM_DATE 0x0000 +#define TODC_TYPE_MK48T35_ALARM_HOUR 0x0000 +#define TODC_TYPE_MK48T35_ALARM_MINUTES 0x0000 +#define TODC_TYPE_MK48T35_ALARM_SECONDS 0x0000 +#define TODC_TYPE_MK48T35_CENTURY 0x0000 +#define TODC_TYPE_MK48T35_FLAGS 0x0000 +#define TODC_TYPE_MK48T35_NVRAM_ADDR_REG 0 +#define TODC_TYPE_MK48T35_NVRAM_DATA_REG 0 + +#define TODC_TYPE_MK48T37_NVRAM_SIZE 0x7ff0 +#define TODC_TYPE_MK48T37_SW_FLAGS 0 +#define TODC_TYPE_MK48T37_YEAR 0x7fff +#define TODC_TYPE_MK48T37_MONTH 0x7ffe +#define TODC_TYPE_MK48T37_DOM 0x7ffd /* Day of Month */ +#define TODC_TYPE_MK48T37_DOW 0x7ffc /* Day of Week */ +#define TODC_TYPE_MK48T37_HOURS 0x7ffb +#define TODC_TYPE_MK48T37_MINUTES 0x7ffa +#define TODC_TYPE_MK48T37_SECONDS 0x7ff9 +#define TODC_TYPE_MK48T37_CNTL_B 0x7ff9 +#define TODC_TYPE_MK48T37_CNTL_A 0x7ff8 +#define TODC_TYPE_MK48T37_WATCHDOG 0x7ff7 +#define TODC_TYPE_MK48T37_INTERRUPTS 0x7ff6 +#define TODC_TYPE_MK48T37_ALARM_DATE 0x7ff5 +#define TODC_TYPE_MK48T37_ALARM_HOUR 0x7ff4 +#define TODC_TYPE_MK48T37_ALARM_MINUTES 0x7ff3 +#define TODC_TYPE_MK48T37_ALARM_SECONDS 0x7ff2 +#define TODC_TYPE_MK48T37_CENTURY 0x7ff1 +#define TODC_TYPE_MK48T37_FLAGS 0x7ff0 +#define TODC_TYPE_MK48T37_NVRAM_ADDR_REG 0 +#define TODC_TYPE_MK48T37_NVRAM_DATA_REG 0 + +#define TODC_TYPE_MK48T59_NVRAM_SIZE 0x1ff0 +#define TODC_TYPE_MK48T59_SW_FLAGS 0 +#define TODC_TYPE_MK48T59_YEAR 0x1fff +#define TODC_TYPE_MK48T59_MONTH 0x1ffe +#define TODC_TYPE_MK48T59_DOM 0x1ffd /* Day of Month */ +#define TODC_TYPE_MK48T59_DOW 0x1ffc /* Day of Week */ +#define TODC_TYPE_MK48T59_HOURS 0x1ffb +#define TODC_TYPE_MK48T59_MINUTES 0x1ffa +#define TODC_TYPE_MK48T59_SECONDS 0x1ff9 +#define TODC_TYPE_MK48T59_CNTL_B 0x1ff9 +#define TODC_TYPE_MK48T59_CNTL_A 0x1ff8 +#define TODC_TYPE_MK48T59_WATCHDOG 0x1fff +#define TODC_TYPE_MK48T59_INTERRUPTS 0x1fff +#define TODC_TYPE_MK48T59_ALARM_DATE 0x1fff +#define TODC_TYPE_MK48T59_ALARM_HOUR 0x1fff +#define TODC_TYPE_MK48T59_ALARM_MINUTES 0x1fff +#define TODC_TYPE_MK48T59_ALARM_SECONDS 0x1fff +#define TODC_TYPE_MK48T59_CENTURY 0x1fff +#define TODC_TYPE_MK48T59_FLAGS 0x1fff +#define TODC_TYPE_MK48T59_NVRAM_ADDR_REG 0 +#define TODC_TYPE_MK48T59_NVRAM_DATA_REG 0 + +#define TODC_TYPE_DS1501_NVRAM_SIZE 0x100 +#define TODC_TYPE_DS1501_SW_FLAGS TODC_FLAG_2_LEVEL_NVRAM +#define TODC_TYPE_DS1501_YEAR (TODC_TYPE_DS1501_NVRAM_SIZE + 0x06) +#define TODC_TYPE_DS1501_MONTH (TODC_TYPE_DS1501_NVRAM_SIZE + 0x05) +#define TODC_TYPE_DS1501_DOM (TODC_TYPE_DS1501_NVRAM_SIZE + 0x04) +#define TODC_TYPE_DS1501_DOW (TODC_TYPE_DS1501_NVRAM_SIZE + 0x03) +#define TODC_TYPE_DS1501_HOURS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x02) +#define TODC_TYPE_DS1501_MINUTES (TODC_TYPE_DS1501_NVRAM_SIZE + 0x01) +#define TODC_TYPE_DS1501_SECONDS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x00) +#define TODC_TYPE_DS1501_CNTL_B (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f) +#define TODC_TYPE_DS1501_CNTL_A (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f) +#define TODC_TYPE_DS1501_WATCHDOG (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff) +#define TODC_TYPE_DS1501_INTERRUPTS (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff) +#define TODC_TYPE_DS1501_ALARM_DATE (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0b) +#define TODC_TYPE_DS1501_ALARM_HOUR (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0a) +#define TODC_TYPE_DS1501_ALARM_MINUTES (TODC_TYPE_DS1501_NVRAM_SIZE + 0x09) +#define TODC_TYPE_DS1501_ALARM_SECONDS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x08) +#define TODC_TYPE_DS1501_CENTURY (TODC_TYPE_DS1501_NVRAM_SIZE + 0x07) +#define TODC_TYPE_DS1501_FLAGS (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff) +#define TODC_TYPE_DS1501_NVRAM_ADDR_REG 0x10 +#define TODC_TYPE_DS1501_NVRAM_DATA_REG 0x13 + +#define TODC_TYPE_DS1553_NVRAM_SIZE 0x1ff0 +#define TODC_TYPE_DS1553_SW_FLAGS 0 +#define TODC_TYPE_DS1553_YEAR 0x1fff +#define TODC_TYPE_DS1553_MONTH 0x1ffe +#define TODC_TYPE_DS1553_DOM 0x1ffd /* Day of Month */ +#define TODC_TYPE_DS1553_DOW 0x1ffc /* Day of Week */ +#define TODC_TYPE_DS1553_HOURS 0x1ffb +#define TODC_TYPE_DS1553_MINUTES 0x1ffa +#define TODC_TYPE_DS1553_SECONDS 0x1ff9 +#define TODC_TYPE_DS1553_CNTL_B 0x1ff9 +#define TODC_TYPE_DS1553_CNTL_A 0x1ff8 /* control_a R/W regs */ +#define TODC_TYPE_DS1553_WATCHDOG 0x1ff7 +#define TODC_TYPE_DS1553_INTERRUPTS 0x1ff6 +#define TODC_TYPE_DS1553_ALARM_DATE 0x1ff5 +#define TODC_TYPE_DS1553_ALARM_HOUR 0x1ff4 +#define TODC_TYPE_DS1553_ALARM_MINUTES 0x1ff3 +#define TODC_TYPE_DS1553_ALARM_SECONDS 0x1ff2 +#define TODC_TYPE_DS1553_CENTURY 0x1ff8 +#define TODC_TYPE_DS1553_FLAGS 0x1ff0 +#define TODC_TYPE_DS1553_NVRAM_ADDR_REG 0 +#define TODC_TYPE_DS1553_NVRAM_DATA_REG 0 + +#define TODC_TYPE_DS1557_NVRAM_SIZE 0x7fff0 +#define TODC_TYPE_DS1557_SW_FLAGS 0 +#define TODC_TYPE_DS1557_YEAR 0x7ffff +#define TODC_TYPE_DS1557_MONTH 0x7fffe +#define TODC_TYPE_DS1557_DOM 0x7fffd /* Day of Month */ +#define TODC_TYPE_DS1557_DOW 0x7fffc /* Day of Week */ +#define TODC_TYPE_DS1557_HOURS 0x7fffb +#define TODC_TYPE_DS1557_MINUTES 0x7fffa +#define TODC_TYPE_DS1557_SECONDS 0x7fff9 +#define TODC_TYPE_DS1557_CNTL_B 0x7fff9 +#define TODC_TYPE_DS1557_CNTL_A 0x7fff8 /* control_a R/W regs */ +#define TODC_TYPE_DS1557_WATCHDOG 0x7fff7 +#define TODC_TYPE_DS1557_INTERRUPTS 0x7fff6 +#define TODC_TYPE_DS1557_ALARM_DATE 0x7fff5 +#define TODC_TYPE_DS1557_ALARM_HOUR 0x7fff4 +#define TODC_TYPE_DS1557_ALARM_MINUTES 0x7fff3 +#define TODC_TYPE_DS1557_ALARM_SECONDS 0x7fff2 +#define TODC_TYPE_DS1557_CENTURY 0x7fff8 +#define TODC_TYPE_DS1557_FLAGS 0x7fff0 +#define TODC_TYPE_DS1557_NVRAM_ADDR_REG 0 +#define TODC_TYPE_DS1557_NVRAM_DATA_REG 0 + +#define TODC_TYPE_DS1643_NVRAM_SIZE 0x1ff8 +#define TODC_TYPE_DS1643_SW_FLAGS 0 +#define TODC_TYPE_DS1643_YEAR 0x1fff +#define TODC_TYPE_DS1643_MONTH 0x1ffe +#define TODC_TYPE_DS1643_DOM 0x1ffd /* Day of Month */ +#define TODC_TYPE_DS1643_DOW 0x1ffc /* Day of Week */ +#define TODC_TYPE_DS1643_HOURS 0x1ffb +#define TODC_TYPE_DS1643_MINUTES 0x1ffa +#define TODC_TYPE_DS1643_SECONDS 0x1ff9 +#define TODC_TYPE_DS1643_CNTL_B 0x1ff9 +#define TODC_TYPE_DS1643_CNTL_A 0x1ff8 /* control_a R/W regs */ +#define TODC_TYPE_DS1643_WATCHDOG 0x1fff +#define TODC_TYPE_DS1643_INTERRUPTS 0x1fff +#define TODC_TYPE_DS1643_ALARM_DATE 0x1fff +#define TODC_TYPE_DS1643_ALARM_HOUR 0x1fff +#define TODC_TYPE_DS1643_ALARM_MINUTES 0x1fff +#define TODC_TYPE_DS1643_ALARM_SECONDS 0x1fff +#define TODC_TYPE_DS1643_CENTURY 0x1ff8 +#define TODC_TYPE_DS1643_FLAGS 0x1fff +#define TODC_TYPE_DS1643_NVRAM_ADDR_REG 0 +#define TODC_TYPE_DS1643_NVRAM_DATA_REG 0 + +#define TODC_TYPE_DS1693_NVRAM_SIZE 0 /* Not handled yet */ +#define TODC_TYPE_DS1693_SW_FLAGS 0 +#define TODC_TYPE_DS1693_YEAR 0x09 +#define TODC_TYPE_DS1693_MONTH 0x08 +#define TODC_TYPE_DS1693_DOM 0x07 /* Day of Month */ +#define TODC_TYPE_DS1693_DOW 0x06 /* Day of Week */ +#define TODC_TYPE_DS1693_HOURS 0x04 +#define TODC_TYPE_DS1693_MINUTES 0x02 +#define TODC_TYPE_DS1693_SECONDS 0x00 +#define TODC_TYPE_DS1693_CNTL_B 0x0b +#define TODC_TYPE_DS1693_CNTL_A 0x0a +#define TODC_TYPE_DS1693_WATCHDOG 0xff +#define TODC_TYPE_DS1693_INTERRUPTS 0xff +#define TODC_TYPE_DS1693_ALARM_DATE 0x49 +#define TODC_TYPE_DS1693_ALARM_HOUR 0x05 +#define TODC_TYPE_DS1693_ALARM_MINUTES 0x03 +#define TODC_TYPE_DS1693_ALARM_SECONDS 0x01 +#define TODC_TYPE_DS1693_CENTURY 0x48 +#define TODC_TYPE_DS1693_FLAGS 0xff +#define TODC_TYPE_DS1693_NVRAM_ADDR_REG 0 +#define TODC_TYPE_DS1693_NVRAM_DATA_REG 0 + +#define TODC_TYPE_DS1743_NVRAM_SIZE 0x1ff8 +#define TODC_TYPE_DS1743_SW_FLAGS 0 +#define TODC_TYPE_DS1743_YEAR 0x1fff +#define TODC_TYPE_DS1743_MONTH 0x1ffe +#define TODC_TYPE_DS1743_DOM 0x1ffd /* Day of Month */ +#define TODC_TYPE_DS1743_DOW 0x1ffc /* Day of Week */ +#define TODC_TYPE_DS1743_HOURS 0x1ffb +#define TODC_TYPE_DS1743_MINUTES 0x1ffa +#define TODC_TYPE_DS1743_SECONDS 0x1ff9 +#define TODC_TYPE_DS1743_CNTL_B 0x1ff9 +#define TODC_TYPE_DS1743_CNTL_A 0x1ff8 /* control_a R/W regs */ +#define TODC_TYPE_DS1743_WATCHDOG 0x1fff +#define TODC_TYPE_DS1743_INTERRUPTS 0x1fff +#define TODC_TYPE_DS1743_ALARM_DATE 0x1fff +#define TODC_TYPE_DS1743_ALARM_HOUR 0x1fff +#define TODC_TYPE_DS1743_ALARM_MINUTES 0x1fff +#define TODC_TYPE_DS1743_ALARM_SECONDS 0x1fff +#define TODC_TYPE_DS1743_CENTURY 0x1ff8 +#define TODC_TYPE_DS1743_FLAGS 0x1fff +#define TODC_TYPE_DS1743_NVRAM_ADDR_REG 0 +#define TODC_TYPE_DS1743_NVRAM_DATA_REG 0 + +#define TODC_TYPE_DS1746_NVRAM_SIZE 0x1fff8 +#define TODC_TYPE_DS1746_SW_FLAGS 0 +#define TODC_TYPE_DS1746_YEAR 0x1ffff +#define TODC_TYPE_DS1746_MONTH 0x1fffe +#define TODC_TYPE_DS1746_DOM 0x1fffd /* Day of Month */ +#define TODC_TYPE_DS1746_DOW 0x1fffc /* Day of Week */ +#define TODC_TYPE_DS1746_HOURS 0x1fffb +#define TODC_TYPE_DS1746_MINUTES 0x1fffa +#define TODC_TYPE_DS1746_SECONDS 0x1fff9 +#define TODC_TYPE_DS1746_CNTL_B 0x1fff9 +#define TODC_TYPE_DS1746_CNTL_A 0x1fff8 /* control_a R/W regs */ +#define TODC_TYPE_DS1746_WATCHDOG 0x00000 +#define TODC_TYPE_DS1746_INTERRUPTS 0x00000 +#define TODC_TYPE_DS1746_ALARM_DATE 0x00000 +#define TODC_TYPE_DS1746_ALARM_HOUR 0x00000 +#define TODC_TYPE_DS1746_ALARM_MINUTES 0x00000 +#define TODC_TYPE_DS1746_ALARM_SECONDS 0x00000 +#define TODC_TYPE_DS1746_CENTURY 0x00000 +#define TODC_TYPE_DS1746_FLAGS 0x00000 +#define TODC_TYPE_DS1746_NVRAM_ADDR_REG 0 +#define TODC_TYPE_DS1746_NVRAM_DATA_REG 0 + +#define TODC_TYPE_DS1747_NVRAM_SIZE 0x7fff8 +#define TODC_TYPE_DS1747_SW_FLAGS 0 +#define TODC_TYPE_DS1747_YEAR 0x7ffff +#define TODC_TYPE_DS1747_MONTH 0x7fffe +#define TODC_TYPE_DS1747_DOM 0x7fffd /* Day of Month */ +#define TODC_TYPE_DS1747_DOW 0x7fffc /* Day of Week */ +#define TODC_TYPE_DS1747_HOURS 0x7fffb +#define TODC_TYPE_DS1747_MINUTES 0x7fffa +#define TODC_TYPE_DS1747_SECONDS 0x7fff9 +#define TODC_TYPE_DS1747_CNTL_B 0x7fff9 +#define TODC_TYPE_DS1747_CNTL_A 0x7fff8 /* control_a R/W regs */ +#define TODC_TYPE_DS1747_WATCHDOG 0x00000 +#define TODC_TYPE_DS1747_INTERRUPTS 0x00000 +#define TODC_TYPE_DS1747_ALARM_DATE 0x00000 +#define TODC_TYPE_DS1747_ALARM_HOUR 0x00000 +#define TODC_TYPE_DS1747_ALARM_MINUTES 0x00000 +#define TODC_TYPE_DS1747_ALARM_SECONDS 0x00000 +#define TODC_TYPE_DS1747_CENTURY 0x00000 +#define TODC_TYPE_DS1747_FLAGS 0x00000 +#define TODC_TYPE_DS1747_NVRAM_ADDR_REG 0 +#define TODC_TYPE_DS1747_NVRAM_DATA_REG 0 + +#define TODC_TYPE_DS17285_NVRAM_SIZE (0x1000-0x80) /* 4Kx8 NVRAM (minus RTC regs) */ +#define TODC_TYPE_DS17285_SW_FLAGS TODC_FLAG_2_LEVEL_NVRAM +#define TODC_TYPE_DS17285_SECONDS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x00) +#define TODC_TYPE_DS17285_ALARM_SECONDS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x01) +#define TODC_TYPE_DS17285_MINUTES (TODC_TYPE_DS17285_NVRAM_SIZE + 0x02) +#define TODC_TYPE_DS17285_ALARM_MINUTES (TODC_TYPE_DS17285_NVRAM_SIZE + 0x03) +#define TODC_TYPE_DS17285_HOURS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x04) +#define TODC_TYPE_DS17285_ALARM_HOUR (TODC_TYPE_DS17285_NVRAM_SIZE + 0x05) +#define TODC_TYPE_DS17285_DOW (TODC_TYPE_DS17285_NVRAM_SIZE + 0x06) +#define TODC_TYPE_DS17285_DOM (TODC_TYPE_DS17285_NVRAM_SIZE + 0x07) +#define TODC_TYPE_DS17285_MONTH (TODC_TYPE_DS17285_NVRAM_SIZE + 0x08) +#define TODC_TYPE_DS17285_YEAR (TODC_TYPE_DS17285_NVRAM_SIZE + 0x09) +#define TODC_TYPE_DS17285_CNTL_A (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0A) +#define TODC_TYPE_DS17285_CNTL_B (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0B) +#define TODC_TYPE_DS17285_CNTL_C (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0C) +#define TODC_TYPE_DS17285_CNTL_D (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0D) +#define TODC_TYPE_DS17285_WATCHDOG 0 +#define TODC_TYPE_DS17285_INTERRUPTS 0 +#define TODC_TYPE_DS17285_ALARM_DATE 0 +#define TODC_TYPE_DS17285_CENTURY 0 +#define TODC_TYPE_DS17285_FLAGS 0 +#define TODC_TYPE_DS17285_NVRAM_ADDR_REG 0x50 +#define TODC_TYPE_DS17285_NVRAM_DATA_REG 0x53 + +#define TODC_TYPE_MC146818_NVRAM_SIZE 0 /* XXXX */ +#define TODC_TYPE_MC146818_SW_FLAGS 0 +#define TODC_TYPE_MC146818_YEAR 0x09 +#define TODC_TYPE_MC146818_MONTH 0x08 +#define TODC_TYPE_MC146818_DOM 0x07 /* Day of Month */ +#define TODC_TYPE_MC146818_DOW 0x06 /* Day of Week */ +#define TODC_TYPE_MC146818_HOURS 0x04 +#define TODC_TYPE_MC146818_MINUTES 0x02 +#define TODC_TYPE_MC146818_SECONDS 0x00 +#define TODC_TYPE_MC146818_CNTL_B 0x0a +#define TODC_TYPE_MC146818_CNTL_A 0x0b /* control_a R/W regs */ +#define TODC_TYPE_MC146818_WATCHDOG 0 +#define TODC_TYPE_MC146818_INTERRUPTS 0x0c +#define TODC_TYPE_MC146818_ALARM_DATE 0xff +#define TODC_TYPE_MC146818_ALARM_HOUR 0x05 +#define TODC_TYPE_MC146818_ALARM_MINUTES 0x03 +#define TODC_TYPE_MC146818_ALARM_SECONDS 0x01 +#define TODC_TYPE_MC146818_CENTURY 0xff +#define TODC_TYPE_MC146818_FLAGS 0xff +#define TODC_TYPE_MC146818_NVRAM_ADDR_REG 0 +#define TODC_TYPE_MC146818_NVRAM_DATA_REG 0 + +#define TODC_TYPE_PC97307_NVRAM_SIZE 0 /* No NVRAM? */ +#define TODC_TYPE_PC97307_SW_FLAGS 0 +#define TODC_TYPE_PC97307_YEAR 0x09 +#define TODC_TYPE_PC97307_MONTH 0x08 +#define TODC_TYPE_PC97307_DOM 0x07 /* Day of Month */ +#define TODC_TYPE_PC97307_DOW 0x06 /* Day of Week */ +#define TODC_TYPE_PC97307_HOURS 0x04 +#define TODC_TYPE_PC97307_MINUTES 0x02 +#define TODC_TYPE_PC97307_SECONDS 0x00 +#define TODC_TYPE_PC97307_CNTL_B 0x0a +#define TODC_TYPE_PC97307_CNTL_A 0x0b /* control_a R/W regs */ +#define TODC_TYPE_PC97307_WATCHDOG 0x0c +#define TODC_TYPE_PC97307_INTERRUPTS 0x0d +#define TODC_TYPE_PC97307_ALARM_DATE 0xff +#define TODC_TYPE_PC97307_ALARM_HOUR 0x05 +#define TODC_TYPE_PC97307_ALARM_MINUTES 0x03 +#define TODC_TYPE_PC97307_ALARM_SECONDS 0x01 +#define TODC_TYPE_PC97307_CENTURY 0xff +#define TODC_TYPE_PC97307_FLAGS 0xff +#define TODC_TYPE_PC97307_NVRAM_ADDR_REG 0 +#define TODC_TYPE_PC97307_NVRAM_DATA_REG 0 + +/* + * Define macros to allocate and init the todc_info_t table that will + * be used by the todc_time.c routines. + */ +#define TODC_ALLOC() \ + static todc_info_t todc_info_alloc; \ + todc_info_t *todc_info = &todc_info_alloc; + +#define TODC_INIT(clock_type, as0, as1, data, bits) { \ + todc_info->rtc_type = clock_type; \ + \ + todc_info->nvram_as0 = (unsigned int)(as0); \ + todc_info->nvram_as1 = (unsigned int)(as1); \ + todc_info->nvram_data = (unsigned int)(data); \ + \ + todc_info->as0_bits = (bits); \ + \ + todc_info->nvram_size = clock_type ##_NVRAM_SIZE; \ + todc_info->sw_flags = clock_type ##_SW_FLAGS; \ + \ + todc_info->year = clock_type ##_YEAR; \ + todc_info->month = clock_type ##_MONTH; \ + todc_info->day_of_month = clock_type ##_DOM; \ + todc_info->day_of_week = clock_type ##_DOW; \ + todc_info->hours = clock_type ##_HOURS; \ + todc_info->minutes = clock_type ##_MINUTES; \ + todc_info->seconds = clock_type ##_SECONDS; \ + todc_info->control_b = clock_type ##_CNTL_B; \ + todc_info->control_a = clock_type ##_CNTL_A; \ + todc_info->watchdog = clock_type ##_WATCHDOG; \ + todc_info->interrupts = clock_type ##_INTERRUPTS; \ + todc_info->alarm_date = clock_type ##_ALARM_DATE; \ + todc_info->alarm_hour = clock_type ##_ALARM_HOUR; \ + todc_info->alarm_minutes = clock_type ##_ALARM_MINUTES; \ + todc_info->alarm_seconds = clock_type ##_ALARM_SECONDS; \ + todc_info->century = clock_type ##_CENTURY; \ + todc_info->flags = clock_type ##_FLAGS; \ + \ + todc_info->nvram_addr_reg = clock_type ##_NVRAM_ADDR_REG; \ + todc_info->nvram_data_reg = clock_type ##_NVRAM_DATA_REG; \ +} + +extern todc_info_t *todc_info; + +unsigned char todc_direct_read_val(int addr); +void todc_direct_write_val(int addr, unsigned char val); +unsigned char todc_m48txx_read_val(int addr); +void todc_m48txx_write_val(int addr, unsigned char val); +unsigned char todc_mc146818_read_val(int addr); +void todc_mc146818_write_val(int addr, unsigned char val); + +long todc_time_init(void); +void todc_get_rtc_time(struct rtc_time *); +int todc_set_rtc_time(struct rtc_time *); +void todc_calibrate_decr(void); + +#endif /* __PPC_KERNEL_TODC_H */ From feb76c7b23fb660f015583359a4c75a1139c0d36 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Wed, 28 Jun 2006 02:50:36 -0700 Subject: [PATCH 41/43] [POWERPC] U4 DART improvements Better late than never... Respin based on previous comment. Only remaining issue last time was an extra mb() that I've taken out. Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/dart.h | 6 +++- arch/powerpc/sysdev/dart_iommu.c | 49 ++++++++++++++++++++++++++++---- 2 files changed, 48 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/sysdev/dart.h b/arch/powerpc/sysdev/dart.h index c2d05763ccbe..1c8817c4835e 100644 --- a/arch/powerpc/sysdev/dart.h +++ b/arch/powerpc/sysdev/dart.h @@ -47,8 +47,12 @@ /* U4 registers */ #define DART_BASE_U4_BASE_MASK 0xffffff #define DART_BASE_U4_BASE_SHIFT 0 -#define DART_CNTL_U4_FLUSHTLB 0x20000000 #define DART_CNTL_U4_ENABLE 0x80000000 +#define DART_CNTL_U4_IONE 0x40000000 +#define DART_CNTL_U4_FLUSHTLB 0x20000000 +#define DART_CNTL_U4_IDLE 0x10000000 +#define DART_CNTL_U4_PAR_EN 0x08000000 +#define DART_CNTL_U4_IONE_MASK 0x07ffffff #define DART_SIZE_U4_SIZE_MASK 0x1fff #define DART_SIZE_U4_SIZE_SHIFT 0 diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index 6232091cc72b..7c7f34ce4986 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -101,8 +101,8 @@ static inline void dart_tlb_invalidate_all(void) if (l == (1L << limit)) { if (limit < 4) { limit++; - reg = DART_IN(DART_CNTL); - reg &= ~inv_bit; + reg = DART_IN(DART_CNTL); + reg &= ~inv_bit; DART_OUT(DART_CNTL, reg); goto retry; } else @@ -111,11 +111,39 @@ static inline void dart_tlb_invalidate_all(void) } } +static inline void dart_tlb_invalidate_one(unsigned long bus_rpn) +{ + unsigned int reg; + unsigned int l, limit; + + reg = DART_CNTL_U4_ENABLE | DART_CNTL_U4_IONE | + (bus_rpn & DART_CNTL_U4_IONE_MASK); + DART_OUT(DART_CNTL, reg); + + limit = 0; +wait_more: + l = 0; + while ((DART_IN(DART_CNTL) & DART_CNTL_U4_IONE) && l < (1L << limit)) { + rmb(); + l++; + } + + if (l == (1L << limit)) { + if (limit < 4) { + limit++; + goto wait_more; + } else + panic("DART: TLB did not flush after waiting a long " + "time. Buggy U4 ?"); + } +} + static void dart_flush(struct iommu_table *tbl) { - if (dart_dirty) + if (dart_dirty) { dart_tlb_invalidate_all(); - dart_dirty = 0; + dart_dirty = 0; + } } static void dart_build(struct iommu_table *tbl, long index, @@ -124,6 +152,7 @@ static void dart_build(struct iommu_table *tbl, long index, { unsigned int *dp; unsigned int rpn; + long l; DBG("dart: build at: %lx, %lx, addr: %x\n", index, npages, uaddr); @@ -135,7 +164,8 @@ static void dart_build(struct iommu_table *tbl, long index, /* On U3, all memory is contigous, so we can move this * out of the loop. */ - while (npages--) { + l = npages; + while (l--) { rpn = virt_to_abs(uaddr) >> DART_PAGE_SHIFT; *(dp++) = DARTMAP_VALID | (rpn & DARTMAP_RPNMASK); @@ -143,7 +173,14 @@ static void dart_build(struct iommu_table *tbl, long index, uaddr += DART_PAGE_SIZE; } - dart_dirty = 1; + if (dart_is_u4) { + rpn = index; + mb(); /* make sure all updates have reached memory */ + while (npages--) + dart_tlb_invalidate_one(rpn++); + } else { + dart_dirty = 1; + } } From 33dbcf72f607f5da791402e161feaf1ccf5d5be4 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 28 Jun 2006 13:18:53 +1000 Subject: [PATCH 42/43] [POWERPC] Make sure smp_processor_id works very early in boot There's a small period early in boot where we don't know which cpu we're running on. That's ok, except that it means we have no paca, or more correctly that our paca pointer points somewhere random. So that we can safely call things like smp_processor_id(), we need a paca, so just assume we're on cpu 0. No code should _write_ to the paca before we've set the correct one up. We setup the proper paca after we've scanned the flat device tree in early_setup(), so there's no need to do it again in start_here_common. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/head_64.S | 11 ----------- arch/powerpc/kernel/setup_64.c | 3 +++ 2 files changed, 3 insertions(+), 11 deletions(-) diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index f2fab687a01c..8cfd040d1f50 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -1583,9 +1583,6 @@ _GLOBAL(__start_initialization_multiplatform) /* Setup some critical 970 SPRs before switching MMU off */ bl .__970_cpu_preinit - /* cpu # */ - li r24,0 - /* Switch off MMU if not already */ LOAD_REG_IMMEDIATE(r4, .__after_prom_start - KERNELBASE) add r4,r4,r30 @@ -1946,14 +1943,6 @@ _STATIC(start_here_common) li r3,0 bl .do_cpu_ftr_fixups - LOAD_REG_IMMEDIATE(r26, boot_cpuid) - lwz r26,0(r26) - - LOAD_REG_IMMEDIATE(r24, paca) /* Get base vaddr of paca array */ - mulli r13,r26,PACA_SIZE /* Calculate vaddr of right paca */ - add r13,r13,r24 /* for this processor. */ - mtspr SPRN_SPRG3,r13 - /* ptr to current */ LOAD_REG_IMMEDIATE(r4, init_task) std r4,PACACURRENT(r13) diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index a2fb2e627aad..175539c9afa0 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -177,6 +177,9 @@ void __init setup_paca(int cpu) void __init early_setup(unsigned long dt_ptr) { + /* Assume we're on cpu 0 for now. Don't write to the paca yet! */ + setup_paca(0); + /* Enable early debugging if any specified (see udbg.h) */ udbg_early_init(); From 339d76c54336443f5050b00172beb675f35e3be0 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 29 Jun 2006 17:12:30 +1000 Subject: [PATCH 43/43] [POWERPC] Use little-endian bit from firmware ibm,pa-features property Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index ce02c056ac3f..320c913435cd 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -953,6 +953,7 @@ static struct ibm_pa_feature { /* put this back once we know how to test if firmware does 64k IO */ {CPU_FTR_CI_LARGE_PAGE, 0, 1, 2, 0}, #endif + {CPU_FTR_REAL_LE, PPC_FEATURE_TRUE_LE, 5, 0, 0}, }; static void __init check_cpu_pa_features(unsigned long node)