openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

ARM: dts: lpc32xx: Remove leading 0x and 0s from bindings notation 

Improve the DTS files by removing all the leading "0x" and zeros to fix
the following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

and

Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Converted using the following command:

find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +

For simplicity, two sed expressions were used to solve each warnings
separately.

To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before
the opening curly brace:

https://elinux.org/Device_Tree_Linux#Linux_conventions

This will solve as a side effect warning:

Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"

This is a follow up to commit 4c9847b737 ("dt-bindings: Remove leading 0x from bindings notation")

Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
[vzapolskiy: fixed commit message to pass checkpatch.pl test]
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
This commit is contained in:
Mathieu Malaterre 2017-12-15 13:46:39 +01:00 committed by Vladimir Zapolskiy
parent ee65af7f9f
commit 3e3380d067
1 changed files with 9 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
arch/arm/boot/dts/lpc32xx.dtsi
View File

@ -230,7 +230,7 @@ sd: sd@20098000 {
status = "disabled";
};
i2s1: i2s@2009C000 {
i2s1: i2s@2009c000 {
compatible = "nxp,lpc3220-i2s";
reg = <0x2009C000 0x1000>;
};
@ -273,7 +273,7 @@ uart6: serial@40098000 {
status = "disabled";
};
i2c1: i2c@400A0000 {
i2c1: i2c@400a0000 {
compatible = "nxp,pnx-i2c";
reg = <0x400A0000 0x100>;
interrupt-parent = <&sic1>;
@ -284,7 +284,7 @@ i2c1: i2c@400A0000 {
clocks = <&clk LPC32XX_CLK_I2C1>;
};
i2c2: i2c@400A8000 {
i2c2: i2c@400a8000 {
compatible = "nxp,pnx-i2c";
reg = <0x400A8000 0x100>;
interrupt-parent = <&sic1>;
@ -295,7 +295,7 @@ i2c2: i2c@400A8000 {
clocks = <&clk LPC32XX_CLK_I2C2>;
};
mpwm: mpwm@400E8000 {
mpwm: mpwm@400e8000 {
compatible = "nxp,lpc3220-motor-pwm";
reg = <0x400E8000 0x78>;
status = "disabled";
@ -394,7 +394,7 @@ gpio: gpio@40028000 {
#gpio-cells = <3>; /* bank, pin, flags */
};
timer4: timer@4002C000 {
timer4: timer@4002c000 {
compatible = "nxp,lpc3220-timer";
reg = <0x4002C000 0x1000>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@ -412,7 +412,7 @@ timer5: timer@40030000 {
status = "disabled";
};
watchdog: watchdog@4003C000 {
watchdog: watchdog@4003c000 {
compatible = "nxp,pnx4008-wdt";
reg = <0x4003C000 0x1000>;
clocks = <&clk LPC32XX_CLK_WDOG>;
@ -451,7 +451,7 @@ tsc: tsc@40048000 {
status = "disabled";
};
timer1: timer@4004C000 {
timer1: timer@4004c000 {
compatible = "nxp,lpc3220-timer";
reg = <0x4004C000 0x1000>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
@ -475,7 +475,7 @@ timer2: timer@40058000 {
status = "disabled";
};
pwm1: pwm@4005C000 {
pwm1: pwm@4005c000 {
compatible = "nxp,lpc3220-pwm";
reg = <0x4005C000 0x4>;
clocks = <&clk LPC32XX_CLK_PWM1>;
@ -484,7 +484,7 @@ pwm1: pwm@4005C000 {
status = "disabled";
};
pwm2: pwm@4005C004 {
pwm2: pwm@4005c004 {
compatible = "nxp,lpc3220-pwm";
reg = <0x4005C004 0x4>;
clocks = <&clk LPC32XX_CLK_PWM2>;