mirror of https://gitee.com/openkylin/linux.git
dt-bindings: mfd: Add Gateworks System Controller bindings
This patch adds documentation of device-tree bindings for the Gateworks System Controller (GSC). Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
This commit is contained in:
Tim Harvey
Lee Jones
parent
8f3d9f3542
commit
3e6cae8e5d
|
|
@ -0,0 +1,196 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Gateworks System Controller
|
||||
|
||||
description: |
|
||||
The Gateworks System Controller (GSC) is a device present across various
|
||||
Gateworks product families that provides a set of system related features
|
||||
such as the following (refer to the board hardware user manuals to see what
|
||||
features are present)
|
||||
- Watchdog Timer
|
||||
- GPIO
|
||||
- Pushbutton controller
|
||||
- Hardware monitor with ADC's for temperature and voltage rails and
|
||||
fan controller
|
||||
|
||||
maintainers:
|
||||
- Tim Harvey <tharvey@gateworks.com>
|
||||
- Robert Jones <rjones@gateworks.com>
|
||||
|
||||
properties:
|
||||
$nodename:
|
||||
pattern: "gsc@[0-9a-f]{1,2}"
|
||||
compatible:
|
||||
const: gw,gsc
|
||||
|
||||
reg:
|
||||
description: I2C device address
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
|
||||
"#interrupt-cells":
|
||||
const: 1
|
||||
|
||||
"#address-cells":
|
||||
const: 1
|
||||
|
||||
"#size-cells":
|
||||
const: 0
|
||||
|
||||
adc:
|
||||
type: object
|
||||
description: Optional hardware monitoring module
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: gw,gsc-adc
|
||||
|
||||
"#address-cells":
|
||||
const: 1
|
||||
|
||||
"#size-cells":
|
||||
const: 0
|
||||
|
||||
patternProperties:
|
||||
"^channel@[0-9]+$":
|
||||
type: object
|
||||
description: |
|
||||
Properties for a single ADC which can report cooked values
|
||||
(i.e. temperature sensor based on thermister), raw values
|
||||
(i.e. voltage rail with a pre-scaling resistor divider).
|
||||
|
||||
properties:
|
||||
reg:
|
||||
description: Register of the ADC
|
||||
maxItems: 1
|
||||
|
||||
label:
|
||||
description: Name of the ADC input
|
||||
|
||||
gw,mode:
|
||||
description: |
|
||||
conversion mode:
|
||||
0 - temperature, in C*10
|
||||
1 - pre-scaled voltage value
|
||||
2 - scaled voltage based on an optional resistor divider
|
||||
and optional offset
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2]
|
||||
|
||||
gw,voltage-divider-ohms:
|
||||
description: Values of resistors for divider on raw ADC input
|
||||
maxItems: 2
|
||||
items:
|
||||
minimum: 1000
|
||||
maximum: 1000000
|
||||
|
||||
gw,voltage-offset-microvolt:
|
||||
description: |
|
||||
A positive voltage offset to apply to a raw ADC
|
||||
(i.e. to compensate for a diode drop).
|
||||
minimum: 0
|
||||
maximum: 1000000
|
||||
|
||||
required:
|
||||
- gw,mode
|
||||
- reg
|
||||
- label
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- "#address-cells"
|
||||
- "#size-cells"
|
||||
|
||||
patternProperties:
|
||||
"^fan-controller@[0-9a-f]+$":
|
||||
type: object
|
||||
description: Optional fan controller
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: gw,gsc-fan
|
||||
|
||||
"#address-cells":
|
||||
const: 1
|
||||
|
||||
"#size-cells":
|
||||
const: 0
|
||||
|
||||
reg:
|
||||
description: The fan controller base address
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- "#address-cells"
|
||||
- "#size-cells"
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- interrupt-controller
|
||||
- "#interrupt-cells"
|
||||
- "#address-cells"
|
||||
- "#size-cells"
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
gsc@20 {
|
||||
compatible = "gw,gsc";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <4 GPIO_ACTIVE_LOW>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
adc {
|
||||
compatible = "gw,gsc-adc";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
channel@0 { /* A0: Board Temperature */
|
||||
reg = <0x00>;
|
||||
label = "temp";
|
||||
gw,mode = <0>;
|
||||
};
|
||||
|
||||
channel@2 { /* A1: Input Voltage (raw ADC) */
|
||||
reg = <0x02>;
|
||||
label = "vdd_vin";
|
||||
gw,mode = <1>;
|
||||
gw,voltage-divider-ohms = <22100 1000>;
|
||||
gw,voltage-offset-microvolt = <800000>;
|
||||
};
|
||||
|
||||
channel@b { /* A2: Battery voltage */
|
||||
reg = <0x0b>;
|
||||
label = "vdd_bat";
|
||||
gw,mode = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
fan-controller@2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "gw,gsc-fan";
|
||||
reg = <0x2c>;
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue