mmc: sdhci-st: Add support for de-asserting reset signal and top regs resource

STiH407 family SoC's can have a reset signal for the controller which needs to
be managed. Also the eMMC controller has some additional 'top' memory mapped
registers which are used to manage the dynamic and static delay required for
UHS modes. This patch adds support for creating the mapping, which will be used
by subsequent patches.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
Peter Griffin 2015-04-10 10:40:24 +01:00 committed by Ulf Hansson
parent 8bef7178a6
commit 406c24310a
1 changed files with 57 additions and 3 deletions

View File

@ -23,9 +23,14 @@
#include <linux/module.h>
#include <linux/err.h>
#include <linux/mmc/host.h>
#include <linux/reset.h>
#include "sdhci-pltfm.h"
struct st_mmc_platform_data {
struct reset_control *rstc;
void __iomem *top_ioaddr;
};
/* MMCSS glue logic to setup the HC on some ST SoCs (e.g. STiH407 family) */
#define ST_MMC_CCONFIG_REG_1 0x400
@ -151,10 +156,16 @@ static const struct sdhci_pltfm_data sdhci_st_pdata = {
static int sdhci_st_probe(struct platform_device *pdev)
{
struct sdhci_host *host;
struct st_mmc_platform_data *pdata;
struct sdhci_pltfm_host *pltfm_host;
struct clk *clk;
int ret = 0;
u16 host_version;
struct resource *res;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
clk = devm_clk_get(&pdev->dev, "mmc");
if (IS_ERR(clk)) {
@ -162,10 +173,17 @@ static int sdhci_st_probe(struct platform_device *pdev)
return PTR_ERR(clk);
}
pdata->rstc = devm_reset_control_get(&pdev->dev, NULL);
if (IS_ERR(pdata->rstc))
pdata->rstc = NULL;
else
reset_control_deassert(pdata->rstc);
host = sdhci_pltfm_init(pdev, &sdhci_st_pdata, 0);
if (IS_ERR(host)) {
dev_err(&pdev->dev, "Failed sdhci_pltfm_init\n");
return PTR_ERR(host);
ret = PTR_ERR(host);
goto err_pltfm_init;
}
ret = mmc_of_parse(host->mmc);
@ -176,7 +194,17 @@ static int sdhci_st_probe(struct platform_device *pdev)
clk_prepare_enable(clk);
/* Configure the FlashSS Top registers for setting eMMC TX/RX delay */
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"top-mmc-delay");
pdata->top_ioaddr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(pdata->top_ioaddr)) {
dev_warn(&pdev->dev, "FlashSS Top Dly registers not available");
pdata->top_ioaddr = NULL;
}
pltfm_host = sdhci_priv(host);
pltfm_host->priv = pdata;
pltfm_host->clk = clk;
ret = sdhci_add_host(host);
@ -200,6 +228,24 @@ static int sdhci_st_probe(struct platform_device *pdev)
clk_disable_unprepare(clk);
err_of:
sdhci_pltfm_free(pdev);
err_pltfm_init:
if (pdata->rstc)
reset_control_assert(pdata->rstc);
return ret;
}
static int sdhci_st_remove(struct platform_device *pdev)
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct st_mmc_platform_data *pdata = pltfm_host->priv;
int ret;
ret = sdhci_pltfm_unregister(pdev);
if (pdata->rstc)
reset_control_assert(pdata->rstc);
return ret;
}
@ -209,11 +255,15 @@ static int sdhci_st_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct st_mmc_platform_data *pdata = pltfm_host->priv;
int ret = sdhci_suspend_host(host);
if (ret)
goto out;
if (pdata->rstc)
reset_control_assert(pdata->rstc);
clk_disable_unprepare(pltfm_host->clk);
out:
return ret;
@ -223,9 +273,13 @@ static int sdhci_st_resume(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct st_mmc_platform_data *pdata = pltfm_host->priv;
clk_prepare_enable(pltfm_host->clk);
if (pdata->rstc)
reset_control_deassert(pdata->rstc);
return sdhci_resume_host(host);
}
#endif
@ -241,7 +295,7 @@ MODULE_DEVICE_TABLE(of, st_sdhci_match);
static struct platform_driver sdhci_st_driver = {
.probe = sdhci_st_probe,
.remove = sdhci_pltfm_unregister,
.remove = sdhci_st_remove,
.driver = {
.name = "sdhci-st",
.pm = &sdhci_st_pmops,