Merge 3.2-rc5 into staging-next

This resolves the conflict in the
drivers/staging/iio/industrialio-core.c file due to two different
changes made to resolve the same problem.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Documentation/devicetree/bindings/nvec/nvec_nvidia.txt

@@ -0,0 +1,9 @@
+NVIDIA compliant embedded controller
+
+Required properties:
+- compatible : should be "nvidia,nvec".
+- reg : the iomem of the i2c slave controller
+- interrupts : the interrupt line of the i2c slave controller
+- clock-frequency : the frequency of the i2c bus
+- gpios : the gpio used for ec request
+- slave-addr: the i2c address of the slave controller

MAINTAINERS

@@ -4152,6 +4152,13 @@ W:	http://ltp.sourceforge.net/
 T:	git git://ltp.git.sourceforge.net/gitroot/ltp/ltp-dev
 S:	Maintained
 
+LTTng (Linux Trace Toolkit Next Generation)
+M:	Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
+L:	lttng-dev@lists.lttng.org (moderated for non-subscribers)
+W:	http://lttng.org
+S:	Maintained
+F:	drivers/staging/lttng/
+
 M32R ARCHITECTURE
 M:	Hirokazu Takata <takata@linux-m32r.org>
 L:	linux-m32r@ml.linux-m32r.org (moderated for non-subscribers)

drivers/net/Kconfig

@@ -338,4 +338,6 @@ config VMXNET3
 	  To compile this driver as a module, choose M here: the
 	  module will be called vmxnet3.
 
+source "drivers/net/hyperv/Kconfig"
+
 endif # NETDEVICES

drivers/net/Makefile

@@ -66,3 +66,5 @@ obj-$(CONFIG_USB_USBNET)        += usb/
 obj-$(CONFIG_USB_ZD1201)        += usb/
 obj-$(CONFIG_USB_IPHETH)        += usb/
 obj-$(CONFIG_USB_CDC_PHONET)   += usb/
+
+obj-$(CONFIG_HYPERV_NET) += hyperv/

drivers/net/hyperv/Kconfig

@@ -0,0 +1,5 @@
+config HYPERV_NET
+	tristate "Microsoft Hyper-V virtual network driver"
+	depends on HYPERV
+	help
+	  Select this option to enable the Hyper-V virtual network driver.

drivers/net/hyperv/Makefile

@@ -0,0 +1,3 @@
+obj-$(CONFIG_HYPERV_NET) += hv_netvsc.o
+
+hv_netvsc-y := netvsc_drv.o netvsc.o rndis_filter.o

drivers/net/hyperv/hyperv_net.h

@@ -87,6 +87,27 @@ struct netvsc_device_info {
 	int  ring_size;
 };
 
+enum rndis_device_state {
+	RNDIS_DEV_UNINITIALIZED = 0,
+	RNDIS_DEV_INITIALIZING,
+	RNDIS_DEV_INITIALIZED,
+	RNDIS_DEV_DATAINITIALIZED,
+};
+
+struct rndis_device {
+	struct netvsc_device *net_dev;
+
+	enum rndis_device_state state;
+	bool link_state;
+	atomic_t new_req_id;
+
+	spinlock_t request_lock;
+	struct list_head req_list;
+
+	unsigned char hw_mac_adr[ETH_ALEN];
+};
+
+
 /* Interface */
 int netvsc_device_add(struct hv_device *device, void *additional_info);
 int netvsc_device_remove(struct hv_device *device);
@@ -109,6 +130,9 @@ int rndis_filter_receive(struct hv_device *dev,
 int rndis_filter_send(struct hv_device *dev,
 			struct hv_netvsc_packet *pkt);
 
+int rndis_filter_set_packet_filter(struct rndis_device *dev, u32 new_filter);
+
+
 #define NVSP_INVALID_PROTOCOL_VERSION	((u32)0xFFFFFFFF)
 
 #define NVSP_PROTOCOL_VERSION_1		2

drivers/net/hyperv/netvsc.c

@@ -230,19 +230,16 @@ static int netvsc_init_recv_buf(struct hv_device *device)
 	net_device->recv_section_cnt = init_packet->msg.
 		v1_msg.send_recv_buf_complete.num_sections;
 
-	net_device->recv_section = kmalloc(net_device->recv_section_cnt
-		* sizeof(struct nvsp_1_receive_buffer_section), GFP_KERNEL);
+	net_device->recv_section = kmemdup(
+		init_packet->msg.v1_msg.send_recv_buf_complete.sections,
+		net_device->recv_section_cnt *
+		sizeof(struct nvsp_1_receive_buffer_section),
+		GFP_KERNEL);
 	if (net_device->recv_section == NULL) {
 		ret = -EINVAL;
 		goto cleanup;
 	}
 
-	memcpy(net_device->recv_section,
-		init_packet->msg.v1_msg.
-	       send_recv_buf_complete.sections,
-		net_device->recv_section_cnt *
-	       sizeof(struct nvsp_1_receive_buffer_section));
-
 	/*
 	 * For 1st release, there should only be 1 section that represents the
 	 * entire receive buffer
@@ -438,6 +435,9 @@ static void netvsc_send_completion(struct hv_device *device,
 			nvsc_packet->completion.send.send_completion_ctx);
 
 		atomic_dec(&net_device->num_outstanding_sends);
+
+		if (netif_queue_stopped(ndev))
+			netif_wake_queue(ndev);
 	} else {
 		netdev_err(ndev, "Unknown send completion packet type- "
 			   "%d received!!\n", nvsp_packet->hdr.msg_type);
@@ -488,11 +488,16 @@ int netvsc_send(struct hv_device *device,
 
 	}
 
-	if (ret != 0)
+	if (ret == 0) {
+		atomic_inc(&net_device->num_outstanding_sends);
+	} else if (ret == -EAGAIN) {
+		netif_stop_queue(ndev);
+		if (atomic_read(&net_device->num_outstanding_sends) < 1)
+			netif_wake_queue(ndev);
+	} else {
 		netdev_err(ndev, "Unable to send packet %p ret %d\n",
 			   packet, ret);
-	else
-		atomic_inc(&net_device->num_outstanding_sends);
+	}
 
 	return ret;
 }

drivers/net/hyperv/netvsc_drv.c

@@ -43,24 +43,59 @@
 struct net_device_context {
 	/* point back to our device context */
 	struct hv_device *device_ctx;
-	atomic_t avail;
 	struct delayed_work dwork;
 };
 
 
-#define PACKET_PAGES_LOWATER  8
-/* Need this many pages to handle worst case fragmented packet */
-#define PACKET_PAGES_HIWATER  (MAX_SKB_FRAGS + 2)
-
 static int ring_size = 128;
 module_param(ring_size, int, S_IRUGO);
 MODULE_PARM_DESC(ring_size, "Ring buffer size (# of pages)");
 
-/* no-op so the netdev core doesn't return -EINVAL when modifying the the
- * multicast address list in SIOCADDMULTI. hv is setup to get all multicast
- * when it calls RndisFilterOnOpen() */
+struct set_multicast_work {
+	struct work_struct work;
+	struct net_device *net;
+};
+
+static void do_set_multicast(struct work_struct *w)
+{
+	struct set_multicast_work *swk =
+		container_of(w, struct set_multicast_work, work);
+	struct net_device *net = swk->net;
+
+	struct net_device_context *ndevctx = netdev_priv(net);
+	struct netvsc_device *nvdev;
+	struct rndis_device *rdev;
+
+	nvdev = hv_get_drvdata(ndevctx->device_ctx);
+	if (nvdev == NULL)
+		return;
+
+	rdev = nvdev->extension;
+	if (rdev == NULL)
+		return;
+
+	if (net->flags & IFF_PROMISC)
+		rndis_filter_set_packet_filter(rdev,
+			NDIS_PACKET_TYPE_PROMISCUOUS);
+	else
+		rndis_filter_set_packet_filter(rdev,
+			NDIS_PACKET_TYPE_BROADCAST |
+			NDIS_PACKET_TYPE_ALL_MULTICAST |
+			NDIS_PACKET_TYPE_DIRECTED);
+
+	kfree(w);
+}
+
 static void netvsc_set_multicast_list(struct net_device *net)
 {
+	struct set_multicast_work *swk =
+		kmalloc(sizeof(struct set_multicast_work), GFP_ATOMIC);
+	if (swk == NULL)
+		return;
+
+	swk->net = net;
+	INIT_WORK(&swk->work, do_set_multicast);
+	schedule_work(&swk->work);
 }
 
 static int netvsc_open(struct net_device *net)
@@ -104,18 +139,8 @@ static void netvsc_xmit_completion(void *context)
 
 	kfree(packet);
 
-	if (skb) {
-		struct net_device *net = skb->dev;
-		struct net_device_context *net_device_ctx = netdev_priv(net);
-		unsigned int num_pages = skb_shinfo(skb)->nr_frags + 2;
-
+	if (skb)
 		dev_kfree_skb_any(skb);
-
-		atomic_add(num_pages, &net_device_ctx->avail);
-		if (atomic_read(&net_device_ctx->avail) >=
-				PACKET_PAGES_HIWATER)
-			netif_wake_queue(net);
-	}
 }
 
 static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
@@ -127,8 +152,6 @@ static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
 
 	/* Add 1 for skb->data and additional one for RNDIS */
 	num_pages = skb_shinfo(skb)->nr_frags + 1 + 1;
-	if (num_pages > atomic_read(&net_device_ctx->avail))
-		return NETDEV_TX_BUSY;
 
 	/* Allocate a netvsc packet based on # of frags. */
 	packet = kzalloc(sizeof(struct hv_netvsc_packet) +
@@ -178,10 +201,6 @@ static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
 	if (ret == 0) {
 		net->stats.tx_bytes += skb->len;
 		net->stats.tx_packets++;
-
-		atomic_sub(num_pages, &net_device_ctx->avail);
-		if (atomic_read(&net_device_ctx->avail) < PACKET_PAGES_LOWATER)
-			netif_stop_queue(net);
 	} else {
 		/* we are shutting down or bus overloaded, just drop packet */
 		net->stats.tx_dropped++;
@@ -351,7 +370,6 @@ static int netvsc_probe(struct hv_device *dev,
 
 	net_device_ctx = netdev_priv(net);
 	net_device_ctx->device_ctx = dev;
-	atomic_set(&net_device_ctx->avail, ring_size);
 	hv_set_drvdata(dev, net);
 	INIT_DELAYED_WORK(&net_device_ctx->dwork, netvsc_send_garp);
 

drivers/net/hyperv/rndis_filter.c

@@ -30,26 +30,6 @@
 #include "hyperv_net.h"
 
 
-enum rndis_device_state {
-	RNDIS_DEV_UNINITIALIZED = 0,
-	RNDIS_DEV_INITIALIZING,
-	RNDIS_DEV_INITIALIZED,
-	RNDIS_DEV_DATAINITIALIZED,
-};
-
-struct rndis_device {
-	struct netvsc_device *net_dev;
-
-	enum rndis_device_state state;
-	bool link_state;
-	atomic_t new_req_id;
-
-	spinlock_t request_lock;
-	struct list_head req_list;
-
-	unsigned char hw_mac_adr[ETH_ALEN];
-};
-
 struct rndis_request {
 	struct list_head list_ent;
 	struct completion  wait_event;
@@ -522,8 +502,7 @@ static int rndis_filter_query_device_link_status(struct rndis_device *dev)
 	return ret;
 }
 
-static int rndis_filter_set_packet_filter(struct rndis_device *dev,
-				      u32 new_filter)
+int rndis_filter_set_packet_filter(struct rndis_device *dev, u32 new_filter)
 {
 	struct rndis_request *request;
 	struct rndis_set_request *set;

drivers/staging/Kconfig

@@ -72,8 +72,6 @@ source "drivers/staging/octeon/Kconfig"
 
 source "drivers/staging/serqt_usb2/Kconfig"
 
-source "drivers/staging/spectra/Kconfig"
-
 source "drivers/staging/quatech_usb2/Kconfig"
 
 source "drivers/staging/vt6655/Kconfig"
@@ -116,8 +114,6 @@ source "drivers/staging/bcm/Kconfig"
 
 source "drivers/staging/ft1000/Kconfig"
 
-source "drivers/staging/intel_sst/Kconfig"
-
 source "drivers/staging/speakup/Kconfig"
 
 source "drivers/staging/cptm1217/Kconfig"
@@ -132,4 +128,8 @@ source "drivers/staging/nvec/Kconfig"
 
 source "drivers/staging/media/Kconfig"
 
+source "drivers/staging/omapdrm/Kconfig"
+
+source "drivers/staging/android/Kconfig"
+
 endif # STAGING

drivers/staging/Makefile

@@ -21,7 +21,6 @@ obj-$(CONFIG_RTL8192E)		+= rtl8192e/
 obj-$(CONFIG_R8712U)		+= rtl8712/
 obj-$(CONFIG_RTS_PSTOR)		+= rts_pstor/
 obj-$(CONFIG_RTS5139)		+= rts5139/
-obj-$(CONFIG_SPECTRA)		+= spectra/
 obj-$(CONFIG_TRANZPORT)		+= frontier/
 obj-$(CONFIG_POHMELFS)		+= pohmelfs/
 obj-$(CONFIG_IDE_PHISON)	+= phison/
@@ -50,10 +49,11 @@ obj-$(CONFIG_SBE_2T3E3)		+= sbe-2t3e3/
 obj-$(CONFIG_USB_ENESTORAGE)	+= keucr/
 obj-$(CONFIG_BCM_WIMAX)		+= bcm/
 obj-$(CONFIG_FT1000)		+= ft1000/
-obj-$(CONFIG_SND_INTEL_SST)	+= intel_sst/
 obj-$(CONFIG_SPEAKUP)		+= speakup/
 obj-$(CONFIG_TOUCHSCREEN_CLEARPAD_TM1217)	+= cptm1217/
 obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4)	+= ste_rmi4/
 obj-$(CONFIG_DRM_PSB)		+= gma500/
 obj-$(CONFIG_INTEL_MEI)		+= mei/
 obj-$(CONFIG_MFD_NVEC)		+= nvec/
+obj-$(CONFIG_DRM_OMAP)		+= omapdrm/
+obj-$(CONFIG_ANDROID)		+= android/

drivers/staging/android/Kconfig

@@ -0,0 +1,95 @@
+menu "Android"
+
+config ANDROID
+	bool "Android Drivers"
+	default N
+	---help---
+	  Enable support for various drivers needed on the Android platform
+
+if ANDROID
+
+config ANDROID_BINDER_IPC
+	bool "Android Binder IPC Driver"
+	default n
+
+config ANDROID_LOGGER
+	tristate "Android log driver"
+	default n
+
+config ANDROID_RAM_CONSOLE
+	bool "Android RAM buffer console"
+	default n
+
+config ANDROID_RAM_CONSOLE_ENABLE_VERBOSE
+	bool "Enable verbose console messages on Android RAM console"
+	default y
+	depends on ANDROID_RAM_CONSOLE
+
+menuconfig ANDROID_RAM_CONSOLE_ERROR_CORRECTION
+	bool "Android RAM Console Enable error correction"
+	default n
+	depends on ANDROID_RAM_CONSOLE
+	depends on !ANDROID_RAM_CONSOLE_EARLY_INIT
+	select REED_SOLOMON
+	select REED_SOLOMON_ENC8
+	select REED_SOLOMON_DEC8
+
+if ANDROID_RAM_CONSOLE_ERROR_CORRECTION
+
+config ANDROID_RAM_CONSOLE_ERROR_CORRECTION_DATA_SIZE
+	int "Android RAM Console Data data size"
+	default 128
+	help
+	  Must be a power of 2.
+
+config ANDROID_RAM_CONSOLE_ERROR_CORRECTION_ECC_SIZE
+	int "Android RAM Console ECC size"
+	default 16
+
+config ANDROID_RAM_CONSOLE_ERROR_CORRECTION_SYMBOL_SIZE
+	int "Android RAM Console Symbol size"
+	default 8
+
+config ANDROID_RAM_CONSOLE_ERROR_CORRECTION_POLYNOMIAL
+	hex "Android RAM Console Polynomial"
+	default 0x19 if (ANDROID_RAM_CONSOLE_ERROR_CORRECTION_SYMBOL_SIZE = 4)
+	default 0x29 if (ANDROID_RAM_CONSOLE_ERROR_CORRECTION_SYMBOL_SIZE = 5)
+	default 0x61 if (ANDROID_RAM_CONSOLE_ERROR_CORRECTION_SYMBOL_SIZE = 6)
+	default 0x89 if (ANDROID_RAM_CONSOLE_ERROR_CORRECTION_SYMBOL_SIZE = 7)
+	default 0x11d if (ANDROID_RAM_CONSOLE_ERROR_CORRECTION_SYMBOL_SIZE = 8)
+
+endif # ANDROID_RAM_CONSOLE_ERROR_CORRECTION
+
+config ANDROID_RAM_CONSOLE_EARLY_INIT
+	bool "Start Android RAM console early"
+	default n
+	depends on ANDROID_RAM_CONSOLE
+
+config ANDROID_RAM_CONSOLE_EARLY_ADDR
+	hex "Android RAM console virtual address"
+	default 0
+	depends on ANDROID_RAM_CONSOLE_EARLY_INIT
+
+config ANDROID_RAM_CONSOLE_EARLY_SIZE
+	hex "Android RAM console buffer size"
+	default 0
+	depends on ANDROID_RAM_CONSOLE_EARLY_INIT
+
+config ANDROID_TIMED_OUTPUT
+	bool "Timed output class driver"
+	default y
+
+config ANDROID_TIMED_GPIO
+	tristate "Android timed gpio driver"
+	depends on GENERIC_GPIO && ANDROID_TIMED_OUTPUT
+	default n
+
+config ANDROID_LOW_MEMORY_KILLER
+	bool "Android Low Memory Killer"
+	default N
+	---help---
+	  Register processes to be killed when memory is low
+
+endif # if ANDROID
+
+endmenu

drivers/staging/android/Makefile

@@ -0,0 +1,6 @@
+obj-$(CONFIG_ANDROID_BINDER_IPC)	+= binder.o
+obj-$(CONFIG_ANDROID_LOGGER)		+= logger.o
+obj-$(CONFIG_ANDROID_RAM_CONSOLE)	+= ram_console.o
+obj-$(CONFIG_ANDROID_TIMED_OUTPUT)	+= timed_output.o
+obj-$(CONFIG_ANDROID_TIMED_GPIO)	+= timed_gpio.o
+obj-$(CONFIG_ANDROID_LOW_MEMORY_KILLER)	+= lowmemorykiller.o

drivers/staging/android/TODO

@@ -0,0 +1,10 @@
+TODO:
+	- checkpatch.pl cleanups
+	- sparse fixes
+	- rename files to be not so "generic"
+	- make sure things build as modules properly
+	- add proper arch dependancies as needed
+	- audit userspace interfaces to make sure they are sane
+
+Please send patches to Greg Kroah-Hartman <greg@kroah.com> and Cc:
+Brian Swetland <swetland@google.com>

drivers/staging/android/binder.h

@@ -0,0 +1,330 @@
+/*
+ * Copyright (C) 2008 Google, Inc.
+ *
+ * Based on, but no longer compatible with, the original
+ * OpenBinder.org binder driver interface, which is:
+ *
+ * Copyright (c) 2005 Palmsource, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_BINDER_H
+#define _LINUX_BINDER_H
+
+#include <linux/ioctl.h>
+
+#define B_PACK_CHARS(c1, c2, c3, c4) \
+	((((c1)<<24)) | (((c2)<<16)) | (((c3)<<8)) | (c4))
+#define B_TYPE_LARGE 0x85
+
+enum {
+	BINDER_TYPE_BINDER	= B_PACK_CHARS('s', 'b', '*', B_TYPE_LARGE),
+	BINDER_TYPE_WEAK_BINDER	= B_PACK_CHARS('w', 'b', '*', B_TYPE_LARGE),
+	BINDER_TYPE_HANDLE	= B_PACK_CHARS('s', 'h', '*', B_TYPE_LARGE),
+	BINDER_TYPE_WEAK_HANDLE	= B_PACK_CHARS('w', 'h', '*', B_TYPE_LARGE),
+	BINDER_TYPE_FD		= B_PACK_CHARS('f', 'd', '*', B_TYPE_LARGE),
+};
+
+enum {
+	FLAT_BINDER_FLAG_PRIORITY_MASK = 0xff,
+	FLAT_BINDER_FLAG_ACCEPTS_FDS = 0x100,
+};
+
+/*
+ * This is the flattened representation of a Binder object for transfer
+ * between processes.  The 'offsets' supplied as part of a binder transaction
+ * contains offsets into the data where these structures occur.  The Binder
+ * driver takes care of re-writing the structure type and data as it moves
+ * between processes.
+ */
+struct flat_binder_object {
+	/* 8 bytes for large_flat_header. */
+	unsigned long		type;
+	unsigned long		flags;
+
+	/* 8 bytes of data. */
+	union {
+		void		*binder;	/* local object */
+		signed long	handle;		/* remote object */
+	};
+
+	/* extra data associated with local object */
+	void			*cookie;
+};
+
+/*
+ * On 64-bit platforms where user code may run in 32-bits the driver must
+ * translate the buffer (and local binder) addresses apropriately.
+ */
+
+struct binder_write_read {
+	signed long	write_size;	/* bytes to write */
+	signed long	write_consumed;	/* bytes consumed by driver */
+	unsigned long	write_buffer;
+	signed long	read_size;	/* bytes to read */
+	signed long	read_consumed;	/* bytes consumed by driver */
+	unsigned long	read_buffer;
+};
+
+/* Use with BINDER_VERSION, driver fills in fields. */
+struct binder_version {
+	/* driver protocol version -- increment with incompatible change */
+	signed long	protocol_version;
+};
+
+/* This is the current protocol version. */
+#define BINDER_CURRENT_PROTOCOL_VERSION 7
+
+#define BINDER_WRITE_READ   		_IOWR('b', 1, struct binder_write_read)
+#define	BINDER_SET_IDLE_TIMEOUT		_IOW('b', 3, int64_t)
+#define	BINDER_SET_MAX_THREADS		_IOW('b', 5, size_t)
+#define	BINDER_SET_IDLE_PRIORITY	_IOW('b', 6, int)
+#define	BINDER_SET_CONTEXT_MGR		_IOW('b', 7, int)
+#define	BINDER_THREAD_EXIT		_IOW('b', 8, int)
+#define BINDER_VERSION			_IOWR('b', 9, struct binder_version)
+
+/*
+ * NOTE: Two special error codes you should check for when calling
+ * in to the driver are:
+ *
+ * EINTR -- The operation has been interupted.  This should be
+ * handled by retrying the ioctl() until a different error code
+ * is returned.
+ *
+ * ECONNREFUSED -- The driver is no longer accepting operations
+ * from your process.  That is, the process is being destroyed.
+ * You should handle this by exiting from your process.  Note
+ * that once this error code is returned, all further calls to
+ * the driver from any thread will return this same code.
+ */
+
+enum transaction_flags {
+	TF_ONE_WAY	= 0x01,	/* this is a one-way call: async, no return */
+	TF_ROOT_OBJECT	= 0x04,	/* contents are the component's root object */
+	TF_STATUS_CODE	= 0x08,	/* contents are a 32-bit status code */
+	TF_ACCEPT_FDS	= 0x10,	/* allow replies with file descriptors */
+};
+
+struct binder_transaction_data {
+	/* The first two are only used for bcTRANSACTION and brTRANSACTION,
+	 * identifying the target and contents of the transaction.
+	 */
+	union {
+		size_t	handle;	/* target descriptor of command transaction */
+		void	*ptr;	/* target descriptor of return transaction */
+	} target;
+	void		*cookie;	/* target object cookie */
+	unsigned int	code;		/* transaction command */
+
+	/* General information about the transaction. */
+	unsigned int	flags;
+	pid_t		sender_pid;
+	uid_t		sender_euid;
+	size_t		data_size;	/* number of bytes of data */
+	size_t		offsets_size;	/* number of bytes of offsets */
+
+	/* If this transaction is inline, the data immediately
+	 * follows here; otherwise, it ends with a pointer to
+	 * the data buffer.
+	 */
+	union {
+		struct {
+			/* transaction data */
+			const void	*buffer;
+			/* offsets from buffer to flat_binder_object structs */
+			const void	*offsets;
+		} ptr;
+		uint8_t	buf[8];
+	} data;
+};
+
+struct binder_ptr_cookie {
+	void *ptr;
+	void *cookie;
+};
+
+struct binder_pri_desc {
+	int priority;
+	int desc;
+};
+
+struct binder_pri_ptr_cookie {
+	int priority;
+	void *ptr;
+	void *cookie;
+};
+
+enum BinderDriverReturnProtocol {
+	BR_ERROR = _IOR('r', 0, int),
+	/*
+	 * int: error code
+	 */
+
+	BR_OK = _IO('r', 1),
+	/* No parameters! */
+
+	BR_TRANSACTION = _IOR('r', 2, struct binder_transaction_data),
+	BR_REPLY = _IOR('r', 3, struct binder_transaction_data),
+	/*
+	 * binder_transaction_data: the received command.
+	 */
+
+	BR_ACQUIRE_RESULT = _IOR('r', 4, int),
+	/*
+	 * not currently supported
+	 * int: 0 if the last bcATTEMPT_ACQUIRE was not successful.
+	 * Else the remote object has acquired a primary reference.
+	 */
+
+	BR_DEAD_REPLY = _IO('r', 5),
+	/*
+	 * The target of the last transaction (either a bcTRANSACTION or
+	 * a bcATTEMPT_ACQUIRE) is no longer with us.  No parameters.
+	 */
+
+	BR_TRANSACTION_COMPLETE = _IO('r', 6),
+	/*
+	 * No parameters... always refers to the last transaction requested
+	 * (including replies).  Note that this will be sent even for
+	 * asynchronous transactions.
+	 */
+
+	BR_INCREFS = _IOR('r', 7, struct binder_ptr_cookie),
+	BR_ACQUIRE = _IOR('r', 8, struct binder_ptr_cookie),
+	BR_RELEASE = _IOR('r', 9, struct binder_ptr_cookie),
+	BR_DECREFS = _IOR('r', 10, struct binder_ptr_cookie),
+	/*
+	 * void *:	ptr to binder
+	 * void *: cookie for binder
+	 */
+
+	BR_ATTEMPT_ACQUIRE = _IOR('r', 11, struct binder_pri_ptr_cookie),
+	/*
+	 * not currently supported
+	 * int:	priority
+	 * void *: ptr to binder
+	 * void *: cookie for binder
+	 */
+
+	BR_NOOP = _IO('r', 12),
+	/*
+	 * No parameters.  Do nothing and examine the next command.  It exists
+	 * primarily so that we can replace it with a BR_SPAWN_LOOPER command.
+	 */
+
+	BR_SPAWN_LOOPER = _IO('r', 13),
+	/*
+	 * No parameters.  The driver has determined that a process has no
+	 * threads waiting to service incomming transactions.  When a process
+	 * receives this command, it must spawn a new service thread and
+	 * register it via bcENTER_LOOPER.
+	 */
+
+	BR_FINISHED = _IO('r', 14),
+	/*
+	 * not currently supported
+	 * stop threadpool thread
+	 */
+
+	BR_DEAD_BINDER = _IOR('r', 15, void *),
+	/*
+	 * void *: cookie
+	 */
+	BR_CLEAR_DEATH_NOTIFICATION_DONE = _IOR('r', 16, void *),
+	/*
+	 * void *: cookie
+	 */
+
+	BR_FAILED_REPLY = _IO('r', 17),
+	/*
+	 * The the last transaction (either a bcTRANSACTION or
+	 * a bcATTEMPT_ACQUIRE) failed (e.g. out of memory).  No parameters.
+	 */
+};
+
+enum BinderDriverCommandProtocol {
+	BC_TRANSACTION = _IOW('c', 0, struct binder_transaction_data),
+	BC_REPLY = _IOW('c', 1, struct binder_transaction_data),
+	/*
+	 * binder_transaction_data: the sent command.
+	 */
+
+	BC_ACQUIRE_RESULT = _IOW('c', 2, int),
+	/*
+	 * not currently supported
+	 * int:  0 if the last BR_ATTEMPT_ACQUIRE was not successful.
+	 * Else you have acquired a primary reference on the object.
+	 */
+
+	BC_FREE_BUFFER = _IOW('c', 3, int),
+	/*
+	 * void *: ptr to transaction data received on a read
+	 */
+
+	BC_INCREFS = _IOW('c', 4, int),
+	BC_ACQUIRE = _IOW('c', 5, int),
+	BC_RELEASE = _IOW('c', 6, int),
+	BC_DECREFS = _IOW('c', 7, int),
+	/*
+	 * int:	descriptor
+	 */
+
+	BC_INCREFS_DONE = _IOW('c', 8, struct binder_ptr_cookie),
+	BC_ACQUIRE_DONE = _IOW('c', 9, struct binder_ptr_cookie),
+	/*
+	 * void *: ptr to binder
+	 * void *: cookie for binder
+	 */
+
+	BC_ATTEMPT_ACQUIRE = _IOW('c', 10, struct binder_pri_desc),
+	/*
+	 * not currently supported
+	 * int: priority
+	 * int: descriptor
+	 */
+
+	BC_REGISTER_LOOPER = _IO('c', 11),
+	/*
+	 * No parameters.
+	 * Register a spawned looper thread with the device.
+	 */
+
+	BC_ENTER_LOOPER = _IO('c', 12),
+	BC_EXIT_LOOPER = _IO('c', 13),
+	/*
+	 * No parameters.
+	 * These two commands are sent as an application-level thread
+	 * enters and exits the binder loop, respectively.  They are
+	 * used so the binder can have an accurate count of the number
+	 * of looping threads it has available.
+	 */
+
+	BC_REQUEST_DEATH_NOTIFICATION = _IOW('c', 14, struct binder_ptr_cookie),
+	/*
+	 * void *: ptr to binder
+	 * void *: cookie
+	 */
+
+	BC_CLEAR_DEATH_NOTIFICATION = _IOW('c', 15, struct binder_ptr_cookie),
+	/*
+	 * void *: ptr to binder
+	 * void *: cookie
+	 */
+
+	BC_DEAD_BINDER_DONE = _IOW('c', 16, void *),
+	/*
+	 * void *: cookie
+	 */
+};
+
+#endif /* _LINUX_BINDER_H */
+

drivers/staging/android/logger.c

@@ -0,0 +1,616 @@
+/*
+ * drivers/misc/logger.c
+ *
+ * A Logging Subsystem
+ *
+ * Copyright (C) 2007-2008 Google, Inc.
+ *
+ * Robert Love <rlove@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/uaccess.h>
+#include <linux/poll.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include "logger.h"
+
+#include <asm/ioctls.h>
+
+/*
+ * struct logger_log - represents a specific log, such as 'main' or 'radio'
+ *
+ * This structure lives from module insertion until module removal, so it does
+ * not need additional reference counting. The structure is protected by the
+ * mutex 'mutex'.
+ */
+struct logger_log {
+	unsigned char 		*buffer;/* the ring buffer itself */
+	struct miscdevice	misc;	/* misc device representing the log */
+	wait_queue_head_t	wq;	/* wait queue for readers */
+	struct list_head	readers; /* this log's readers */
+	struct mutex		mutex;	/* mutex protecting buffer */
+	size_t			w_off;	/* current write head offset */
+	size_t			head;	/* new readers start here */
+	size_t			size;	/* size of the log */
+};
+
+/*
+ * struct logger_reader - a logging device open for reading
+ *
+ * This object lives from open to release, so we don't need additional
+ * reference counting. The structure is protected by log->mutex.
+ */
+struct logger_reader {
+	struct logger_log	*log;	/* associated log */
+	struct list_head	list;	/* entry in logger_log's list */
+	size_t			r_off;	/* current read head offset */
+};
+
+/* logger_offset - returns index 'n' into the log via (optimized) modulus */
+#define logger_offset(n)	((n) & (log->size - 1))
+
+/*
+ * file_get_log - Given a file structure, return the associated log
+ *
+ * This isn't aesthetic. We have several goals:
+ *
+ * 	1) Need to quickly obtain the associated log during an I/O operation
+ * 	2) Readers need to maintain state (logger_reader)
+ * 	3) Writers need to be very fast (open() should be a near no-op)
+ *
+ * In the reader case, we can trivially go file->logger_reader->logger_log.
+ * For a writer, we don't want to maintain a logger_reader, so we just go
+ * file->logger_log. Thus what file->private_data points at depends on whether
+ * or not the file was opened for reading. This function hides that dirtiness.
+ */
+static inline struct logger_log *file_get_log(struct file *file)
+{
+	if (file->f_mode & FMODE_READ) {
+		struct logger_reader *reader = file->private_data;
+		return reader->log;
+	} else
+		return file->private_data;
+}
+
+/*
+ * get_entry_len - Grabs the length of the payload of the next entry starting
+ * from 'off'.
+ *
+ * Caller needs to hold log->mutex.
+ */
+static __u32 get_entry_len(struct logger_log *log, size_t off)
+{
+	__u16 val;
+
+	switch (log->size - off) {
+	case 1:
+		memcpy(&val, log->buffer + off, 1);
+		memcpy(((char *) &val) + 1, log->buffer, 1);
+		break;
+	default:
+		memcpy(&val, log->buffer + off, 2);
+	}
+
+	return sizeof(struct logger_entry) + val;
+}
+
+/*
+ * do_read_log_to_user - reads exactly 'count' bytes from 'log' into the
+ * user-space buffer 'buf'. Returns 'count' on success.
+ *
+ * Caller must hold log->mutex.
+ */
+static ssize_t do_read_log_to_user(struct logger_log *log,
+				   struct logger_reader *reader,
+				   char __user *buf,
+				   size_t count)
+{
+	size_t len;
+
+	/*
+	 * We read from the log in two disjoint operations. First, we read from
+	 * the current read head offset up to 'count' bytes or to the end of
+	 * the log, whichever comes first.
+	 */
+	len = min(count, log->size - reader->r_off);
+	if (copy_to_user(buf, log->buffer + reader->r_off, len))
+		return -EFAULT;
+
+	/*
+	 * Second, we read any remaining bytes, starting back at the head of
+	 * the log.
+	 */
+	if (count != len)
+		if (copy_to_user(buf + len, log->buffer, count - len))
+			return -EFAULT;
+
+	reader->r_off = logger_offset(reader->r_off + count);
+
+	return count;
+}
+
+/*
+ * logger_read - our log's read() method
+ *
+ * Behavior:
+ *
+ * 	- O_NONBLOCK works
+ * 	- If there are no log entries to read, blocks until log is written to
+ * 	- Atomically reads exactly one log entry
+ *
+ * Optimal read size is LOGGER_ENTRY_MAX_LEN. Will set errno to EINVAL if read
+ * buffer is insufficient to hold next entry.
+ */
+static ssize_t logger_read(struct file *file, char __user *buf,
+			   size_t count, loff_t *pos)
+{
+	struct logger_reader *reader = file->private_data;
+	struct logger_log *log = reader->log;
+	ssize_t ret;
+	DEFINE_WAIT(wait);
+
+start:
+	while (1) {
+		prepare_to_wait(&log->wq, &wait, TASK_INTERRUPTIBLE);
+
+		mutex_lock(&log->mutex);
+		ret = (log->w_off == reader->r_off);
+		mutex_unlock(&log->mutex);
+		if (!ret)
+			break;
+
+		if (file->f_flags & O_NONBLOCK) {
+			ret = -EAGAIN;
+			break;
+		}
+
+		if (signal_pending(current)) {
+			ret = -EINTR;
+			break;
+		}
+
+		schedule();
+	}
+
+	finish_wait(&log->wq, &wait);
+	if (ret)
+		return ret;
+
+	mutex_lock(&log->mutex);
+
+	/* is there still something to read or did we race? */
+	if (unlikely(log->w_off == reader->r_off)) {
+		mutex_unlock(&log->mutex);
+		goto start;
+	}
+
+	/* get the size of the next entry */
+	ret = get_entry_len(log, reader->r_off);
+	if (count < ret) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* get exactly one entry from the log */
+	ret = do_read_log_to_user(log, reader, buf, ret);
+
+out:
+	mutex_unlock(&log->mutex);
+
+	return ret;
+}
+
+/*
+ * get_next_entry - return the offset of the first valid entry at least 'len'
+ * bytes after 'off'.
+ *
+ * Caller must hold log->mutex.
+ */
+static size_t get_next_entry(struct logger_log *log, size_t off, size_t len)
+{
+	size_t count = 0;
+
+	do {
+		size_t nr = get_entry_len(log, off);
+		off = logger_offset(off + nr);
+		count += nr;
+	} while (count < len);
+
+	return off;
+}
+
+/*
+ * clock_interval - is a < c < b in mod-space? Put another way, does the line
+ * from a to b cross c?
+ */
+static inline int clock_interval(size_t a, size_t b, size_t c)
+{
+	if (b < a) {
+		if (a < c || b >= c)
+			return 1;
+	} else {
+		if (a < c && b >= c)
+			return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * fix_up_readers - walk the list of all readers and "fix up" any who were
+ * lapped by the writer; also do the same for the default "start head".
+ * We do this by "pulling forward" the readers and start head to the first
+ * entry after the new write head.
+ *
+ * The caller needs to hold log->mutex.
+ */
+static void fix_up_readers(struct logger_log *log, size_t len)
+{
+	size_t old = log->w_off;
+	size_t new = logger_offset(old + len);
+	struct logger_reader *reader;
+
+	if (clock_interval(old, new, log->head))
+		log->head = get_next_entry(log, log->head, len);
+
+	list_for_each_entry(reader, &log->readers, list)
+		if (clock_interval(old, new, reader->r_off))
+			reader->r_off = get_next_entry(log, reader->r_off, len);
+}
+
+/*
+ * do_write_log - writes 'len' bytes from 'buf' to 'log'
+ *
+ * The caller needs to hold log->mutex.
+ */
+static void do_write_log(struct logger_log *log, const void *buf, size_t count)
+{
+	size_t len;
+
+	len = min(count, log->size - log->w_off);
+	memcpy(log->buffer + log->w_off, buf, len);
+
+	if (count != len)
+		memcpy(log->buffer, buf + len, count - len);
+
+	log->w_off = logger_offset(log->w_off + count);
+
+}
+
+/*
+ * do_write_log_user - writes 'len' bytes from the user-space buffer 'buf' to
+ * the log 'log'
+ *
+ * The caller needs to hold log->mutex.
+ *
+ * Returns 'count' on success, negative error code on failure.
+ */
+static ssize_t do_write_log_from_user(struct logger_log *log,
+				      const void __user *buf, size_t count)
+{
+	size_t len;
+
+	len = min(count, log->size - log->w_off);
+	if (len && copy_from_user(log->buffer + log->w_off, buf, len))
+		return -EFAULT;
+
+	if (count != len)
+		if (copy_from_user(log->buffer, buf + len, count - len))
+			return -EFAULT;
+
+	log->w_off = logger_offset(log->w_off + count);
+
+	return count;
+}
+
+/*
+ * logger_aio_write - our write method, implementing support for write(),
+ * writev(), and aio_write(). Writes are our fast path, and we try to optimize
+ * them above all else.
+ */
+ssize_t logger_aio_write(struct kiocb *iocb, const struct iovec *iov,
+			 unsigned long nr_segs, loff_t ppos)
+{
+	struct logger_log *log = file_get_log(iocb->ki_filp);
+	size_t orig = log->w_off;
+	struct logger_entry header;
+	struct timespec now;
+	ssize_t ret = 0;
+
+	now = current_kernel_time();
+
+	header.pid = current->tgid;
+	header.tid = current->pid;
+	header.sec = now.tv_sec;
+	header.nsec = now.tv_nsec;
+	header.len = min_t(size_t, iocb->ki_left, LOGGER_ENTRY_MAX_PAYLOAD);
+
+	/* null writes succeed, return zero */
+	if (unlikely(!header.len))
+		return 0;
+
+	mutex_lock(&log->mutex);
+
+	/*
+	 * Fix up any readers, pulling them forward to the first readable
+	 * entry after (what will be) the new write offset. We do this now
+	 * because if we partially fail, we can end up with clobbered log
+	 * entries that encroach on readable buffer.
+	 */
+	fix_up_readers(log, sizeof(struct logger_entry) + header.len);
+
+	do_write_log(log, &header, sizeof(struct logger_entry));
+
+	while (nr_segs-- > 0) {
+		size_t len;
+		ssize_t nr;
+
+		/* figure out how much of this vector we can keep */
+		len = min_t(size_t, iov->iov_len, header.len - ret);
+
+		/* write out this segment's payload */
+		nr = do_write_log_from_user(log, iov->iov_base, len);
+		if (unlikely(nr < 0)) {
+			log->w_off = orig;
+			mutex_unlock(&log->mutex);
+			return nr;
+		}
+
+		iov++;
+		ret += nr;
+	}
+
+	mutex_unlock(&log->mutex);
+
+	/* wake up any blocked readers */
+	wake_up_interruptible(&log->wq);
+
+	return ret;
+}
+
+static struct logger_log *get_log_from_minor(int);
+
+/*
+ * logger_open - the log's open() file operation
+ *
+ * Note how near a no-op this is in the write-only case. Keep it that way!
+ */
+static int logger_open(struct inode *inode, struct file *file)
+{
+	struct logger_log *log;
+	int ret;
+
+	ret = nonseekable_open(inode, file);
+	if (ret)
+		return ret;
+
+	log = get_log_from_minor(MINOR(inode->i_rdev));
+	if (!log)
+		return -ENODEV;
+
+	if (file->f_mode & FMODE_READ) {
+		struct logger_reader *reader;
+
+		reader = kmalloc(sizeof(struct logger_reader), GFP_KERNEL);
+		if (!reader)
+			return -ENOMEM;
+
+		reader->log = log;
+		INIT_LIST_HEAD(&reader->list);
+
+		mutex_lock(&log->mutex);
+		reader->r_off = log->head;
+		list_add_tail(&reader->list, &log->readers);
+		mutex_unlock(&log->mutex);
+
+		file->private_data = reader;
+	} else
+		file->private_data = log;
+
+	return 0;
+}
+
+/*
+ * logger_release - the log's release file operation
+ *
+ * Note this is a total no-op in the write-only case. Keep it that way!
+ */
+static int logger_release(struct inode *ignored, struct file *file)
+{
+	if (file->f_mode & FMODE_READ) {
+		struct logger_reader *reader = file->private_data;
+		list_del(&reader->list);
+		kfree(reader);
+	}
+
+	return 0;
+}
+
+/*
+ * logger_poll - the log's poll file operation, for poll/select/epoll
+ *
+ * Note we always return POLLOUT, because you can always write() to the log.
+ * Note also that, strictly speaking, a return value of POLLIN does not
+ * guarantee that the log is readable without blocking, as there is a small
+ * chance that the writer can lap the reader in the interim between poll()
+ * returning and the read() request.
+ */
+static unsigned int logger_poll(struct file *file, poll_table *wait)
+{
+	struct logger_reader *reader;
+	struct logger_log *log;
+	unsigned int ret = POLLOUT | POLLWRNORM;
+
+	if (!(file->f_mode & FMODE_READ))
+		return ret;
+
+	reader = file->private_data;
+	log = reader->log;
+
+	poll_wait(file, &log->wq, wait);
+
+	mutex_lock(&log->mutex);
+	if (log->w_off != reader->r_off)
+		ret |= POLLIN | POLLRDNORM;
+	mutex_unlock(&log->mutex);
+
+	return ret;
+}
+
+static long logger_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	struct logger_log *log = file_get_log(file);
+	struct logger_reader *reader;
+	long ret = -ENOTTY;
+
+	mutex_lock(&log->mutex);
+
+	switch (cmd) {
+	case LOGGER_GET_LOG_BUF_SIZE:
+		ret = log->size;
+		break;
+	case LOGGER_GET_LOG_LEN:
+		if (!(file->f_mode & FMODE_READ)) {
+			ret = -EBADF;
+			break;
+		}
+		reader = file->private_data;
+		if (log->w_off >= reader->r_off)
+			ret = log->w_off - reader->r_off;
+		else
+			ret = (log->size - reader->r_off) + log->w_off;
+		break;
+	case LOGGER_GET_NEXT_ENTRY_LEN:
+		if (!(file->f_mode & FMODE_READ)) {
+			ret = -EBADF;
+			break;
+		}
+		reader = file->private_data;
+		if (log->w_off != reader->r_off)
+			ret = get_entry_len(log, reader->r_off);
+		else
+			ret = 0;
+		break;
+	case LOGGER_FLUSH_LOG:
+		if (!(file->f_mode & FMODE_WRITE)) {
+			ret = -EBADF;
+			break;
+		}
+		list_for_each_entry(reader, &log->readers, list)
+			reader->r_off = log->w_off;
+		log->head = log->w_off;
+		ret = 0;
+		break;
+	}
+
+	mutex_unlock(&log->mutex);
+
+	return ret;
+}
+
+static const struct file_operations logger_fops = {
+	.owner = THIS_MODULE,
+	.read = logger_read,
+	.aio_write = logger_aio_write,
+	.poll = logger_poll,
+	.unlocked_ioctl = logger_ioctl,
+	.compat_ioctl = logger_ioctl,
+	.open = logger_open,
+	.release = logger_release,
+};
+
+/*
+ * Defines a log structure with name 'NAME' and a size of 'SIZE' bytes, which
+ * must be a power of two, greater than LOGGER_ENTRY_MAX_LEN, and less than
+ * LONG_MAX minus LOGGER_ENTRY_MAX_LEN.
+ */
+#define DEFINE_LOGGER_DEVICE(VAR, NAME, SIZE) \
+static unsigned char _buf_ ## VAR[SIZE]; \
+static struct logger_log VAR = { \
+	.buffer = _buf_ ## VAR, \
+	.misc = { \
+		.minor = MISC_DYNAMIC_MINOR, \
+		.name = NAME, \
+		.fops = &logger_fops, \
+		.parent = NULL, \
+	}, \
+	.wq = __WAIT_QUEUE_HEAD_INITIALIZER(VAR .wq), \
+	.readers = LIST_HEAD_INIT(VAR .readers), \
+	.mutex = __MUTEX_INITIALIZER(VAR .mutex), \
+	.w_off = 0, \
+	.head = 0, \
+	.size = SIZE, \
+};
+
+DEFINE_LOGGER_DEVICE(log_main, LOGGER_LOG_MAIN, 256*1024)
+DEFINE_LOGGER_DEVICE(log_events, LOGGER_LOG_EVENTS, 256*1024)
+DEFINE_LOGGER_DEVICE(log_radio, LOGGER_LOG_RADIO, 256*1024)
+DEFINE_LOGGER_DEVICE(log_system, LOGGER_LOG_SYSTEM, 256*1024)
+
+static struct logger_log *get_log_from_minor(int minor)
+{
+	if (log_main.misc.minor == minor)
+		return &log_main;
+	if (log_events.misc.minor == minor)
+		return &log_events;
+	if (log_radio.misc.minor == minor)
+		return &log_radio;
+	if (log_system.misc.minor == minor)
+		return &log_system;
+	return NULL;
+}
+
+static int __init init_log(struct logger_log *log)
+{
+	int ret;
+
+	ret = misc_register(&log->misc);
+	if (unlikely(ret)) {
+		printk(KERN_ERR "logger: failed to register misc "
+		       "device for log '%s'!\n", log->misc.name);
+		return ret;
+	}
+
+	printk(KERN_INFO "logger: created %luK log '%s'\n",
+	       (unsigned long) log->size >> 10, log->misc.name);
+
+	return 0;
+}
+
+static int __init logger_init(void)
+{
+	int ret;
+
+	ret = init_log(&log_main);
+	if (unlikely(ret))
+		goto out;
+
+	ret = init_log(&log_events);
+	if (unlikely(ret))
+		goto out;
+
+	ret = init_log(&log_radio);
+	if (unlikely(ret))
+		goto out;
+
+	ret = init_log(&log_system);
+	if (unlikely(ret))
+		goto out;
+
+out:
+	return ret;
+}
+device_initcall(logger_init);

drivers/staging/android/logger.h

@@ -0,0 +1,49 @@
+/* include/linux/logger.h
+ *
+ * Copyright (C) 2007-2008 Google, Inc.
+ * Author: Robert Love <rlove@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_LOGGER_H
+#define _LINUX_LOGGER_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+struct logger_entry {
+	__u16		len;	/* length of the payload */
+	__u16		__pad;	/* no matter what, we get 2 bytes of padding */
+	__s32		pid;	/* generating process's pid */
+	__s32		tid;	/* generating process's tid */
+	__s32		sec;	/* seconds since Epoch */
+	__s32		nsec;	/* nanoseconds */
+	char		msg[0];	/* the entry's payload */
+};
+
+#define LOGGER_LOG_RADIO	"log_radio"	/* radio-related messages */
+#define LOGGER_LOG_EVENTS	"log_events"	/* system/hardware events */
+#define LOGGER_LOG_SYSTEM	"log_system"	/* system/framework messages */
+#define LOGGER_LOG_MAIN		"log_main"	/* everything else */
+
+#define LOGGER_ENTRY_MAX_LEN		(4*1024)
+#define LOGGER_ENTRY_MAX_PAYLOAD	\
+	(LOGGER_ENTRY_MAX_LEN - sizeof(struct logger_entry))
+
+#define __LOGGERIO	0xAE
+
+#define LOGGER_GET_LOG_BUF_SIZE		_IO(__LOGGERIO, 1) /* size of log */
+#define LOGGER_GET_LOG_LEN		_IO(__LOGGERIO, 2) /* used log len */
+#define LOGGER_GET_NEXT_ENTRY_LEN	_IO(__LOGGERIO, 3) /* next entry len */
+#define LOGGER_FLUSH_LOG		_IO(__LOGGERIO, 4) /* flush log */
+
+#endif /* _LINUX_LOGGER_H */

drivers/staging/android/lowmemorykiller.c

@@ -0,0 +1,219 @@
+/* drivers/misc/lowmemorykiller.c
+ *
+ * The lowmemorykiller driver lets user-space specify a set of memory thresholds
+ * where processes with a range of oom_adj values will get killed. Specify the
+ * minimum oom_adj values in /sys/module/lowmemorykiller/parameters/adj and the
+ * number of free pages in /sys/module/lowmemorykiller/parameters/minfree. Both
+ * files take a comma separated list of numbers in ascending order.
+ *
+ * For example, write "0,8" to /sys/module/lowmemorykiller/parameters/adj and
+ * "1024,4096" to /sys/module/lowmemorykiller/parameters/minfree to kill processes
+ * with a oom_adj value of 8 or higher when the free memory drops below 4096 pages
+ * and kill processes with a oom_adj value of 0 or higher when the free memory
+ * drops below 1024 pages.
+ *
+ * The driver considers memory used for caches to be free, but if a large
+ * percentage of the cached memory is locked this can be very inaccurate
+ * and processes may not get killed until the normal oom killer is triggered.
+ *
+ * Copyright (C) 2007-2008 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/oom.h>
+#include <linux/sched.h>
+#include <linux/profile.h>
+#include <linux/notifier.h>
+
+static uint32_t lowmem_debug_level = 2;
+static int lowmem_adj[6] = {
+	0,
+	1,
+	6,
+	12,
+};
+static int lowmem_adj_size = 4;
+static size_t lowmem_minfree[6] = {
+	3 * 512,	/* 6MB */
+	2 * 1024,	/* 8MB */
+	4 * 1024,	/* 16MB */
+	16 * 1024,	/* 64MB */
+};
+static int lowmem_minfree_size = 4;
+
+static struct task_struct *lowmem_deathpending;
+
+#define lowmem_print(level, x...)			\
+	do {						\
+		if (lowmem_debug_level >= (level))	\
+			printk(x);			\
+	} while (0)
+
+static int
+task_notify_func(struct notifier_block *self, unsigned long val, void *data);
+
+static struct notifier_block task_nb = {
+	.notifier_call	= task_notify_func,
+};
+
+static int
+task_notify_func(struct notifier_block *self, unsigned long val, void *data)
+{
+	struct task_struct *task = data;
+	if (task == lowmem_deathpending) {
+		lowmem_deathpending = NULL;
+		task_handoff_unregister(&task_nb);
+	}
+	return NOTIFY_OK;
+}
+
+static int lowmem_shrink(struct shrinker *s, struct shrink_control *sc)
+{
+	struct task_struct *p;
+	struct task_struct *selected = NULL;
+	int rem = 0;
+	int tasksize;
+	int i;
+	int min_adj = OOM_ADJUST_MAX + 1;
+	int selected_tasksize = 0;
+	int selected_oom_adj;
+	int array_size = ARRAY_SIZE(lowmem_adj);
+	int other_free = global_page_state(NR_FREE_PAGES);
+	int other_file = global_page_state(NR_FILE_PAGES) -
+						global_page_state(NR_SHMEM);
+
+	/*
+	 * If we already have a death outstanding, then
+	 * bail out right away; indicating to vmscan
+	 * that we have nothing further to offer on
+	 * this pass.
+	 *
+	 * Note: Currently you need CONFIG_PROFILING
+	 * for this to work correctly.
+	 */
+	if (lowmem_deathpending)
+		return 0;
+
+	if (lowmem_adj_size < array_size)
+		array_size = lowmem_adj_size;
+	if (lowmem_minfree_size < array_size)
+		array_size = lowmem_minfree_size;
+	for (i = 0; i < array_size; i++) {
+		if (other_free < lowmem_minfree[i] &&
+		    other_file < lowmem_minfree[i]) {
+			min_adj = lowmem_adj[i];
+			break;
+		}
+	}
+	if (sc->nr_to_scan > 0)
+		lowmem_print(3, "lowmem_shrink %lu, %x, ofree %d %d, ma %d\n",
+			     sc->nr_to_scan, sc->gfp_mask, other_free, other_file,
+			     min_adj);
+	rem = global_page_state(NR_ACTIVE_ANON) +
+		global_page_state(NR_ACTIVE_FILE) +
+		global_page_state(NR_INACTIVE_ANON) +
+		global_page_state(NR_INACTIVE_FILE);
+	if (sc->nr_to_scan <= 0 || min_adj == OOM_ADJUST_MAX + 1) {
+		lowmem_print(5, "lowmem_shrink %lu, %x, return %d\n",
+			     sc->nr_to_scan, sc->gfp_mask, rem);
+		return rem;
+	}
+	selected_oom_adj = min_adj;
+
+	read_lock(&tasklist_lock);
+	for_each_process(p) {
+		struct mm_struct *mm;
+		struct signal_struct *sig;
+		int oom_adj;
+
+		task_lock(p);
+		mm = p->mm;
+		sig = p->signal;
+		if (!mm || !sig) {
+			task_unlock(p);
+			continue;
+		}
+		oom_adj = sig->oom_adj;
+		if (oom_adj < min_adj) {
+			task_unlock(p);
+			continue;
+		}
+		tasksize = get_mm_rss(mm);
+		task_unlock(p);
+		if (tasksize <= 0)
+			continue;
+		if (selected) {
+			if (oom_adj < selected_oom_adj)
+				continue;
+			if (oom_adj == selected_oom_adj &&
+			    tasksize <= selected_tasksize)
+				continue;
+		}
+		selected = p;
+		selected_tasksize = tasksize;
+		selected_oom_adj = oom_adj;
+		lowmem_print(2, "select %d (%s), adj %d, size %d, to kill\n",
+			     p->pid, p->comm, oom_adj, tasksize);
+	}
+	if (selected) {
+		lowmem_print(1, "send sigkill to %d (%s), adj %d, size %d\n",
+			     selected->pid, selected->comm,
+			     selected_oom_adj, selected_tasksize);
+		/*
+		 * If CONFIG_PROFILING is off, then task_handoff_register()
+		 * is a nop. In that case we don't want to stall the killer
+		 * by setting lowmem_deathpending.
+		 */
+#ifdef CONFIG_PROFILING
+		lowmem_deathpending = selected;
+		task_handoff_register(&task_nb);
+#endif
+		force_sig(SIGKILL, selected);
+		rem -= selected_tasksize;
+	}
+	lowmem_print(4, "lowmem_shrink %lu, %x, return %d\n",
+		     sc->nr_to_scan, sc->gfp_mask, rem);
+	read_unlock(&tasklist_lock);
+	return rem;
+}
+
+static struct shrinker lowmem_shrinker = {
+	.shrink = lowmem_shrink,
+	.seeks = DEFAULT_SEEKS * 16
+};
+
+static int __init lowmem_init(void)
+{
+	register_shrinker(&lowmem_shrinker);
+	return 0;
+}
+
+static void __exit lowmem_exit(void)
+{
+	unregister_shrinker(&lowmem_shrinker);
+}
+
+module_param_named(cost, lowmem_shrinker.seeks, int, S_IRUGO | S_IWUSR);
+module_param_array_named(adj, lowmem_adj, int, &lowmem_adj_size,
+			 S_IRUGO | S_IWUSR);
+module_param_array_named(minfree, lowmem_minfree, uint, &lowmem_minfree_size,
+			 S_IRUGO | S_IWUSR);
+module_param_named(debug_level, lowmem_debug_level, uint, S_IRUGO | S_IWUSR);
+
+module_init(lowmem_init);
+module_exit(lowmem_exit);
+
+MODULE_LICENSE("GPL");
+

drivers/staging/android/ram_console.c

@@ -0,0 +1,443 @@
+/* drivers/android/ram_console.c
+ *
+ * Copyright (C) 2007-2008 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/proc_fs.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include "ram_console.h"
+
+#ifdef CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION
+#include <linux/rslib.h>
+#endif
+
+struct ram_console_buffer {
+	uint32_t    sig;
+	uint32_t    start;
+	uint32_t    size;
+	uint8_t     data[0];
+};
+
+#define RAM_CONSOLE_SIG (0x43474244) /* DBGC */
+
+#ifdef CONFIG_ANDROID_RAM_CONSOLE_EARLY_INIT
+static char __initdata
+	ram_console_old_log_init_buffer[CONFIG_ANDROID_RAM_CONSOLE_EARLY_SIZE];
+#endif
+static char *ram_console_old_log;
+static size_t ram_console_old_log_size;
+
+static struct ram_console_buffer *ram_console_buffer;
+static size_t ram_console_buffer_size;
+#ifdef CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION
+static char *ram_console_par_buffer;
+static struct rs_control *ram_console_rs_decoder;
+static int ram_console_corrected_bytes;
+static int ram_console_bad_blocks;
+#define ECC_BLOCK_SIZE CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_DATA_SIZE
+#define ECC_SIZE CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_ECC_SIZE
+#define ECC_SYMSIZE CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_SYMBOL_SIZE
+#define ECC_POLY CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_POLYNOMIAL
+#endif
+
+#ifdef CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION
+static void ram_console_encode_rs8(uint8_t *data, size_t len, uint8_t *ecc)
+{
+	int i;
+	uint16_t par[ECC_SIZE];
+	/* Initialize the parity buffer */
+	memset(par, 0, sizeof(par));
+	encode_rs8(ram_console_rs_decoder, data, len, par, 0);
+	for (i = 0; i < ECC_SIZE; i++)
+		ecc[i] = par[i];
+}
+
+static int ram_console_decode_rs8(void *data, size_t len, uint8_t *ecc)
+{
+	int i;
+	uint16_t par[ECC_SIZE];
+	for (i = 0; i < ECC_SIZE; i++)
+		par[i] = ecc[i];
+	return decode_rs8(ram_console_rs_decoder, data, par, len,
+				NULL, 0, NULL, 0, NULL);
+}
+#endif
+
+static void ram_console_update(const char *s, unsigned int count)
+{
+	struct ram_console_buffer *buffer = ram_console_buffer;
+#ifdef CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION
+	uint8_t *buffer_end = buffer->data + ram_console_buffer_size;
+	uint8_t *block;
+	uint8_t *par;
+	int size = ECC_BLOCK_SIZE;
+#endif
+	memcpy(buffer->data + buffer->start, s, count);
+#ifdef CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION
+	block = buffer->data + (buffer->start & ~(ECC_BLOCK_SIZE - 1));
+	par = ram_console_par_buffer +
+	      (buffer->start / ECC_BLOCK_SIZE) * ECC_SIZE;
+	do {
+		if (block + ECC_BLOCK_SIZE > buffer_end)
+			size = buffer_end - block;
+		ram_console_encode_rs8(block, size, par);
+		block += ECC_BLOCK_SIZE;
+		par += ECC_SIZE;
+	} while (block < buffer->data + buffer->start + count);
+#endif
+}
+
+static void ram_console_update_header(void)
+{
+#ifdef CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION
+	struct ram_console_buffer *buffer = ram_console_buffer;
+	uint8_t *par;
+	par = ram_console_par_buffer +
+	      DIV_ROUND_UP(ram_console_buffer_size, ECC_BLOCK_SIZE) * ECC_SIZE;
+	ram_console_encode_rs8((uint8_t *)buffer, sizeof(*buffer), par);
+#endif
+}
+
+static void
+ram_console_write(struct console *console, const char *s, unsigned int count)
+{
+	int rem;
+	struct ram_console_buffer *buffer = ram_console_buffer;
+
+	if (count > ram_console_buffer_size) {
+		s += count - ram_console_buffer_size;
+		count = ram_console_buffer_size;
+	}
+	rem = ram_console_buffer_size - buffer->start;
+	if (rem < count) {
+		ram_console_update(s, rem);
+		s += rem;
+		count -= rem;
+		buffer->start = 0;
+		buffer->size = ram_console_buffer_size;
+	}
+	ram_console_update(s, count);
+
+	buffer->start += count;
+	if (buffer->size < ram_console_buffer_size)
+		buffer->size += count;
+	ram_console_update_header();
+}
+
+static struct console ram_console = {
+	.name	= "ram",
+	.write	= ram_console_write,
+	.flags	= CON_PRINTBUFFER | CON_ENABLED,
+	.index	= -1,
+};
+
+void ram_console_enable_console(int enabled)
+{
+	if (enabled)
+		ram_console.flags |= CON_ENABLED;
+	else
+		ram_console.flags &= ~CON_ENABLED;
+}
+
+static void __init
+ram_console_save_old(struct ram_console_buffer *buffer, const char *bootinfo,
+	char *dest)
+{
+	size_t old_log_size = buffer->size;
+	size_t bootinfo_size = 0;
+	size_t total_size = old_log_size;
+	char *ptr;
+	const char *bootinfo_label = "Boot info:\n";
+
+#ifdef CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION
+	uint8_t *block;
+	uint8_t *par;
+	char strbuf[80];
+	int strbuf_len = 0;
+
+	block = buffer->data;
+	par = ram_console_par_buffer;
+	while (block < buffer->data + buffer->size) {
+		int numerr;
+		int size = ECC_BLOCK_SIZE;
+		if (block + size > buffer->data + ram_console_buffer_size)
+			size = buffer->data + ram_console_buffer_size - block;
+		numerr = ram_console_decode_rs8(block, size, par);
+		if (numerr > 0) {
+#if 0
+			printk(KERN_INFO "ram_console: error in block %p, %d\n",
+			       block, numerr);
+#endif
+			ram_console_corrected_bytes += numerr;
+		} else if (numerr < 0) {
+#if 0
+			printk(KERN_INFO "ram_console: uncorrectable error in "
+			       "block %p\n", block);
+#endif
+			ram_console_bad_blocks++;
+		}
+		block += ECC_BLOCK_SIZE;
+		par += ECC_SIZE;
+	}
+	if (ram_console_corrected_bytes || ram_console_bad_blocks)
+		strbuf_len = snprintf(strbuf, sizeof(strbuf),
+			"\n%d Corrected bytes, %d unrecoverable blocks\n",
+			ram_console_corrected_bytes, ram_console_bad_blocks);
+	else
+		strbuf_len = snprintf(strbuf, sizeof(strbuf),
+				      "\nNo errors detected\n");
+	if (strbuf_len >= sizeof(strbuf))
+		strbuf_len = sizeof(strbuf) - 1;
+	total_size += strbuf_len;
+#endif
+
+	if (bootinfo)
+		bootinfo_size = strlen(bootinfo) + strlen(bootinfo_label);
+	total_size += bootinfo_size;
+
+	if (dest == NULL) {
+		dest = kmalloc(total_size, GFP_KERNEL);
+		if (dest == NULL) {
+			printk(KERN_ERR
+			       "ram_console: failed to allocate buffer\n");
+			return;
+		}
+	}
+
+	ram_console_old_log = dest;
+	ram_console_old_log_size = total_size;
+	memcpy(ram_console_old_log,
+	       &buffer->data[buffer->start], buffer->size - buffer->start);
+	memcpy(ram_console_old_log + buffer->size - buffer->start,
+	       &buffer->data[0], buffer->start);
+	ptr = ram_console_old_log + old_log_size;
+#ifdef CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION
+	memcpy(ptr, strbuf, strbuf_len);
+	ptr += strbuf_len;
+#endif
+	if (bootinfo) {
+		memcpy(ptr, bootinfo_label, strlen(bootinfo_label));
+		ptr += strlen(bootinfo_label);
+		memcpy(ptr, bootinfo, bootinfo_size);
+		ptr += bootinfo_size;
+	}
+}
+
+static int __init ram_console_init(struct ram_console_buffer *buffer,
+				   size_t buffer_size, const char *bootinfo,
+				   char *old_buf)
+{
+#ifdef CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION
+	int numerr;
+	uint8_t *par;
+#endif
+	ram_console_buffer = buffer;
+	ram_console_buffer_size =
+		buffer_size - sizeof(struct ram_console_buffer);
+
+	if (ram_console_buffer_size > buffer_size) {
+		pr_err("ram_console: buffer %p, invalid size %zu, "
+		       "datasize %zu\n", buffer, buffer_size,
+		       ram_console_buffer_size);
+		return 0;
+	}
+
+#ifdef CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION
+	ram_console_buffer_size -= (DIV_ROUND_UP(ram_console_buffer_size,
+						ECC_BLOCK_SIZE) + 1) * ECC_SIZE;
+
+	if (ram_console_buffer_size > buffer_size) {
+		pr_err("ram_console: buffer %p, invalid size %zu, "
+		       "non-ecc datasize %zu\n",
+		       buffer, buffer_size, ram_console_buffer_size);
+		return 0;
+	}
+
+	ram_console_par_buffer = buffer->data + ram_console_buffer_size;
+
+
+	/* first consecutive root is 0
+	 * primitive element to generate roots = 1
+	 */
+	ram_console_rs_decoder = init_rs(ECC_SYMSIZE, ECC_POLY, 0, 1, ECC_SIZE);
+	if (ram_console_rs_decoder == NULL) {
+		printk(KERN_INFO "ram_console: init_rs failed\n");
+		return 0;
+	}
+
+	ram_console_corrected_bytes = 0;
+	ram_console_bad_blocks = 0;
+
+	par = ram_console_par_buffer +
+	      DIV_ROUND_UP(ram_console_buffer_size, ECC_BLOCK_SIZE) * ECC_SIZE;
+
+	numerr = ram_console_decode_rs8(buffer, sizeof(*buffer), par);
+	if (numerr > 0) {
+		printk(KERN_INFO "ram_console: error in header, %d\n", numerr);
+		ram_console_corrected_bytes += numerr;
+	} else if (numerr < 0) {
+		printk(KERN_INFO
+		       "ram_console: uncorrectable error in header\n");
+		ram_console_bad_blocks++;
+	}
+#endif
+
+	if (buffer->sig == RAM_CONSOLE_SIG) {
+		if (buffer->size > ram_console_buffer_size
+		    || buffer->start > buffer->size)
+			printk(KERN_INFO "ram_console: found existing invalid "
+			       "buffer, size %d, start %d\n",
+			       buffer->size, buffer->start);
+		else {
+			printk(KERN_INFO "ram_console: found existing buffer, "
+			       "size %d, start %d\n",
+			       buffer->size, buffer->start);
+			ram_console_save_old(buffer, bootinfo, old_buf);
+		}
+	} else {
+		printk(KERN_INFO "ram_console: no valid data in buffer "
+		       "(sig = 0x%08x)\n", buffer->sig);
+	}
+
+	buffer->sig = RAM_CONSOLE_SIG;
+	buffer->start = 0;
+	buffer->size = 0;
+
+	register_console(&ram_console);
+#ifdef CONFIG_ANDROID_RAM_CONSOLE_ENABLE_VERBOSE
+	console_verbose();
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_ANDROID_RAM_CONSOLE_EARLY_INIT
+static int __init ram_console_early_init(void)
+{
+	return ram_console_init((struct ram_console_buffer *)
+		CONFIG_ANDROID_RAM_CONSOLE_EARLY_ADDR,
+		CONFIG_ANDROID_RAM_CONSOLE_EARLY_SIZE,
+		NULL,
+		ram_console_old_log_init_buffer);
+}
+#else
+static int ram_console_driver_probe(struct platform_device *pdev)
+{
+	struct resource *res = pdev->resource;
+	size_t start;
+	size_t buffer_size;
+	void *buffer;
+	const char *bootinfo = NULL;
+	struct ram_console_platform_data *pdata = pdev->dev.platform_data;
+
+	if (res == NULL || pdev->num_resources != 1 ||
+	    !(res->flags & IORESOURCE_MEM)) {
+		printk(KERN_ERR "ram_console: invalid resource, %p %d flags "
+		       "%lx\n", res, pdev->num_resources, res ? res->flags : 0);
+		return -ENXIO;
+	}
+	buffer_size = res->end - res->start + 1;
+	start = res->start;
+	printk(KERN_INFO "ram_console: got buffer at %zx, size %zx\n",
+	       start, buffer_size);
+	buffer = ioremap(res->start, buffer_size);
+	if (buffer == NULL) {
+		printk(KERN_ERR "ram_console: failed to map memory\n");
+		return -ENOMEM;
+	}
+
+	if (pdata)
+		bootinfo = pdata->bootinfo;
+
+	return ram_console_init(buffer, buffer_size, bootinfo, NULL/* allocate */);
+}
+
+static struct platform_driver ram_console_driver = {
+	.probe = ram_console_driver_probe,
+	.driver		= {
+		.name	= "ram_console",
+	},
+};
+
+static int __init ram_console_module_init(void)
+{
+	int err;
+	err = platform_driver_register(&ram_console_driver);
+	return err;
+}
+#endif
+
+static ssize_t ram_console_read_old(struct file *file, char __user *buf,
+				    size_t len, loff_t *offset)
+{
+	loff_t pos = *offset;
+	ssize_t count;
+
+	if (pos >= ram_console_old_log_size)
+		return 0;
+
+	count = min(len, (size_t)(ram_console_old_log_size - pos));
+	if (copy_to_user(buf, ram_console_old_log + pos, count))
+		return -EFAULT;
+
+	*offset += count;
+	return count;
+}
+
+static const struct file_operations ram_console_file_ops = {
+	.owner = THIS_MODULE,
+	.read = ram_console_read_old,
+};
+
+static int __init ram_console_late_init(void)
+{
+	struct proc_dir_entry *entry;
+
+	if (ram_console_old_log == NULL)
+		return 0;
+#ifdef CONFIG_ANDROID_RAM_CONSOLE_EARLY_INIT
+	ram_console_old_log = kmalloc(ram_console_old_log_size, GFP_KERNEL);
+	if (ram_console_old_log == NULL) {
+		printk(KERN_ERR
+		       "ram_console: failed to allocate buffer for old log\n");
+		ram_console_old_log_size = 0;
+		return 0;
+	}
+	memcpy(ram_console_old_log,
+	       ram_console_old_log_init_buffer, ram_console_old_log_size);
+#endif
+	entry = create_proc_entry("last_kmsg", S_IFREG | S_IRUGO, NULL);
+	if (!entry) {
+		printk(KERN_ERR "ram_console: failed to create proc entry\n");
+		kfree(ram_console_old_log);
+		ram_console_old_log = NULL;
+		return 0;
+	}
+
+	entry->proc_fops = &ram_console_file_ops;
+	entry->size = ram_console_old_log_size;
+	return 0;
+}
+
+#ifdef CONFIG_ANDROID_RAM_CONSOLE_EARLY_INIT
+console_initcall(ram_console_early_init);
+#else
+postcore_initcall(ram_console_module_init);
+#endif
+late_initcall(ram_console_late_init);
+

drivers/staging/android/ram_console.h

@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _INCLUDE_LINUX_PLATFORM_DATA_RAM_CONSOLE_H_
+#define _INCLUDE_LINUX_PLATFORM_DATA_RAM_CONSOLE_H_
+
+struct ram_console_platform_data {
+	const char *bootinfo;
+};
+
+#endif /* _INCLUDE_LINUX_PLATFORM_DATA_RAM_CONSOLE_H_ */

drivers/staging/android/timed_gpio.c

@@ -0,0 +1,176 @@
+/* drivers/misc/timed_gpio.c
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/hrtimer.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+
+#include "timed_output.h"
+#include "timed_gpio.h"
+
+
+struct timed_gpio_data {
+	struct timed_output_dev dev;
+	struct hrtimer timer;
+	spinlock_t lock;
+	unsigned 	gpio;
+	int 		max_timeout;
+	u8 		active_low;
+};
+
+static enum hrtimer_restart gpio_timer_func(struct hrtimer *timer)
+{
+	struct timed_gpio_data *data =
+		container_of(timer, struct timed_gpio_data, timer);
+
+	gpio_direction_output(data->gpio, data->active_low ? 1 : 0);
+	return HRTIMER_NORESTART;
+}
+
+static int gpio_get_time(struct timed_output_dev *dev)
+{
+	struct timed_gpio_data	*data =
+		container_of(dev, struct timed_gpio_data, dev);
+
+	if (hrtimer_active(&data->timer)) {
+		ktime_t r = hrtimer_get_remaining(&data->timer);
+		struct timeval t = ktime_to_timeval(r);
+		return t.tv_sec * 1000 + t.tv_usec / 1000;
+	} else
+		return 0;
+}
+
+static void gpio_enable(struct timed_output_dev *dev, int value)
+{
+	struct timed_gpio_data	*data =
+		container_of(dev, struct timed_gpio_data, dev);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&data->lock, flags);
+
+	/* cancel previous timer and set GPIO according to value */
+	hrtimer_cancel(&data->timer);
+	gpio_direction_output(data->gpio, data->active_low ? !value : !!value);
+
+	if (value > 0) {
+		if (value > data->max_timeout)
+			value = data->max_timeout;
+
+		hrtimer_start(&data->timer,
+			ktime_set(value / 1000, (value % 1000) * 1000000),
+			HRTIMER_MODE_REL);
+	}
+
+	spin_unlock_irqrestore(&data->lock, flags);
+}
+
+static int timed_gpio_probe(struct platform_device *pdev)
+{
+	struct timed_gpio_platform_data *pdata = pdev->dev.platform_data;
+	struct timed_gpio *cur_gpio;
+	struct timed_gpio_data *gpio_data, *gpio_dat;
+	int i, j, ret = 0;
+
+	if (!pdata)
+		return -EBUSY;
+
+	gpio_data = kzalloc(sizeof(struct timed_gpio_data) * pdata->num_gpios,
+			GFP_KERNEL);
+	if (!gpio_data)
+		return -ENOMEM;
+
+	for (i = 0; i < pdata->num_gpios; i++) {
+		cur_gpio = &pdata->gpios[i];
+		gpio_dat = &gpio_data[i];
+
+		hrtimer_init(&gpio_dat->timer, CLOCK_MONOTONIC,
+				HRTIMER_MODE_REL);
+		gpio_dat->timer.function = gpio_timer_func;
+		spin_lock_init(&gpio_dat->lock);
+
+		gpio_dat->dev.name = cur_gpio->name;
+		gpio_dat->dev.get_time = gpio_get_time;
+		gpio_dat->dev.enable = gpio_enable;
+		ret = gpio_request(cur_gpio->gpio, cur_gpio->name);
+		if (ret >= 0) {
+			ret = timed_output_dev_register(&gpio_dat->dev);
+			if (ret < 0)
+				gpio_free(cur_gpio->gpio);
+		}
+		if (ret < 0) {
+			for (j = 0; j < i; j++) {
+				timed_output_dev_unregister(&gpio_data[i].dev);
+				gpio_free(gpio_data[i].gpio);
+			}
+			kfree(gpio_data);
+			return ret;
+		}
+
+		gpio_dat->gpio = cur_gpio->gpio;
+		gpio_dat->max_timeout = cur_gpio->max_timeout;
+		gpio_dat->active_low = cur_gpio->active_low;
+		gpio_direction_output(gpio_dat->gpio, gpio_dat->active_low);
+	}
+
+	platform_set_drvdata(pdev, gpio_data);
+
+	return 0;
+}
+
+static int timed_gpio_remove(struct platform_device *pdev)
+{
+	struct timed_gpio_platform_data *pdata = pdev->dev.platform_data;
+	struct timed_gpio_data *gpio_data = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < pdata->num_gpios; i++) {
+		timed_output_dev_unregister(&gpio_data[i].dev);
+		gpio_free(gpio_data[i].gpio);
+	}
+
+	kfree(gpio_data);
+
+	return 0;
+}
+
+static struct platform_driver timed_gpio_driver = {
+	.probe		= timed_gpio_probe,
+	.remove		= timed_gpio_remove,
+	.driver		= {
+		.name		= TIMED_GPIO_NAME,
+		.owner		= THIS_MODULE,
+	},
+};
+
+static int __init timed_gpio_init(void)
+{
+	return platform_driver_register(&timed_gpio_driver);
+}
+
+static void __exit timed_gpio_exit(void)
+{
+	platform_driver_unregister(&timed_gpio_driver);
+}
+
+module_init(timed_gpio_init);
+module_exit(timed_gpio_exit);
+
+MODULE_AUTHOR("Mike Lockwood <lockwood@android.com>");
+MODULE_DESCRIPTION("timed gpio driver");
+MODULE_LICENSE("GPL");

drivers/staging/android/timed_gpio.h

@@ -0,0 +1,33 @@
+/* include/linux/timed_gpio.h
+ *
+ * Copyright (C) 2008 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+*/
+
+#ifndef _LINUX_TIMED_GPIO_H
+#define _LINUX_TIMED_GPIO_H
+
+#define TIMED_GPIO_NAME "timed-gpio"
+
+struct timed_gpio {
+	const char *name;
+	unsigned 	gpio;
+	int		max_timeout;
+	u8 		active_low;
+};
+
+struct timed_gpio_platform_data {
+	int 		num_gpios;
+	struct timed_gpio *gpios;
+};
+
+#endif

drivers/staging/android/timed_output.c

@@ -0,0 +1,123 @@
+/* drivers/misc/timed_output.c
+ *
+ * Copyright (C) 2009 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/err.h>
+
+#include "timed_output.h"
+
+static struct class *timed_output_class;
+static atomic_t device_count;
+
+static ssize_t enable_show(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct timed_output_dev *tdev = dev_get_drvdata(dev);
+	int remaining = tdev->get_time(tdev);
+
+	return sprintf(buf, "%d\n", remaining);
+}
+
+static ssize_t enable_store(
+		struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t size)
+{
+	struct timed_output_dev *tdev = dev_get_drvdata(dev);
+	int value;
+
+	if (sscanf(buf, "%d", &value) != 1)
+		return -EINVAL;
+
+	tdev->enable(tdev, value);
+
+	return size;
+}
+
+static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, enable_show, enable_store);
+
+static int create_timed_output_class(void)
+{
+	if (!timed_output_class) {
+		timed_output_class = class_create(THIS_MODULE, "timed_output");
+		if (IS_ERR(timed_output_class))
+			return PTR_ERR(timed_output_class);
+		atomic_set(&device_count, 0);
+	}
+
+	return 0;
+}
+
+int timed_output_dev_register(struct timed_output_dev *tdev)
+{
+	int ret;
+
+	if (!tdev || !tdev->name || !tdev->enable || !tdev->get_time)
+		return -EINVAL;
+
+	ret = create_timed_output_class();
+	if (ret < 0)
+		return ret;
+
+	tdev->index = atomic_inc_return(&device_count);
+	tdev->dev = device_create(timed_output_class, NULL,
+		MKDEV(0, tdev->index), NULL, tdev->name);
+	if (IS_ERR(tdev->dev))
+		return PTR_ERR(tdev->dev);
+
+	ret = device_create_file(tdev->dev, &dev_attr_enable);
+	if (ret < 0)
+		goto err_create_file;
+
+	dev_set_drvdata(tdev->dev, tdev);
+	tdev->state = 0;
+	return 0;
+
+err_create_file:
+	device_destroy(timed_output_class, MKDEV(0, tdev->index));
+	printk(KERN_ERR "timed_output: Failed to register driver %s\n",
+			tdev->name);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(timed_output_dev_register);
+
+void timed_output_dev_unregister(struct timed_output_dev *tdev)
+{
+	device_remove_file(tdev->dev, &dev_attr_enable);
+	device_destroy(timed_output_class, MKDEV(0, tdev->index));
+	dev_set_drvdata(tdev->dev, NULL);
+}
+EXPORT_SYMBOL_GPL(timed_output_dev_unregister);
+
+static int __init timed_output_init(void)
+{
+	return create_timed_output_class();
+}
+
+static void __exit timed_output_exit(void)
+{
+	class_destroy(timed_output_class);
+}
+
+module_init(timed_output_init);
+module_exit(timed_output_exit);
+
+MODULE_AUTHOR("Mike Lockwood <lockwood@android.com>");
+MODULE_DESCRIPTION("timed output class driver");
+MODULE_LICENSE("GPL");

drivers/staging/android/timed_output.h

@@ -0,0 +1,37 @@
+/* include/linux/timed_output.h
+ *
+ * Copyright (C) 2008 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+*/
+
+#ifndef _LINUX_TIMED_OUTPUT_H
+#define _LINUX_TIMED_OUTPUT_H
+
+struct timed_output_dev {
+	const char	*name;
+
+	/* enable the output and set the timer */
+	void	(*enable)(struct timed_output_dev *sdev, int timeout);
+
+	/* returns the current number of milliseconds remaining on the timer */
+	int		(*get_time)(struct timed_output_dev *sdev);
+
+	/* private data */
+	struct device	*dev;
+	int		index;
+	int		state;
+};
+
+extern int timed_output_dev_register(struct timed_output_dev *dev);
+extern void timed_output_dev_unregister(struct timed_output_dev *dev);
+
+#endif

drivers/staging/asus_oled/asus_oled.c

@@ -201,7 +201,7 @@ static ssize_t set_enabled(struct device *dev, struct device_attribute *attr,
 	struct usb_interface *intf = to_usb_interface(dev);
 	struct asus_oled_dev *odev = usb_get_intfdata(intf);
 	unsigned long value;
-	if (strict_strtoul(buf, 10, &value))
+	if (kstrtoul(buf, 10, &value))
 		return -EINVAL;
 
 	enable_oled(odev, value);
@@ -217,7 +217,7 @@ static ssize_t class_set_enabled(struct device *device,
 		(struct asus_oled_dev *) dev_get_drvdata(device);
 	unsigned long value;
 
-	if (strict_strtoul(buf, 10, &value))
+	if (kstrtoul(buf, 10, &value))
 		return -EINVAL;
 
 	enable_oled(odev, value);

drivers/staging/bcm/Bcmchar.c

@@ -161,6 +161,7 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 	INT Status = STATUS_FAILURE;
 	int timeout = 0;
 	IOCTL_BUFFER IoBuffer;
+	int bytes;
 
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Parameters Passed to control IOCTL cmd=0x%X arg=0x%lX", cmd, arg);
 
@@ -230,11 +231,16 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		if (!temp_buff)
 			return -ENOMEM;
 
-		Status = rdmalt(Adapter, (UINT)sRdmBuffer.Register,
+		bytes = rdmalt(Adapter, (UINT)sRdmBuffer.Register,
 				(PUINT)temp_buff, Bufflen);
-		if (Status == STATUS_SUCCESS) {
-			if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, IoBuffer.OutputLength))
-				Status = -EFAULT;
+		if (bytes > 0) {
+			Status = STATUS_SUCCESS;
+			if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, bytes)) {
+				kfree(temp_buff);
+				return -EFAULT;
+			}
+		} else {
+			Status = bytes;
 		}
 
 		kfree(temp_buff);
@@ -302,7 +308,11 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		if (copy_from_user(&sRdmBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength))
 			return -EFAULT;
 
-		/* FIXME: don't trust user supplied length */
+		if (IoBuffer.OutputLength > USHRT_MAX ||
+			IoBuffer.OutputLength == 0) {
+			return -EINVAL;
+		}
+
 		temp_buff = kmalloc(IoBuffer.OutputLength, GFP_KERNEL);
 		if (!temp_buff)
 			return STATUS_FAILURE;
@@ -318,11 +328,17 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		}
 
 		uiTempVar = sRdmBuffer.Register & EEPROM_REJECT_MASK;
-		Status = rdmaltWithLock(Adapter, (UINT)sRdmBuffer.Register, (PUINT)temp_buff, IoBuffer.OutputLength);
+		bytes = rdmaltWithLock(Adapter, (UINT)sRdmBuffer.Register, (PUINT)temp_buff, IoBuffer.OutputLength);
 
-		if (Status == STATUS_SUCCESS)
-			if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, IoBuffer.OutputLength))
-				Status = -EFAULT;
+		if (bytes > 0) {
+			Status = STATUS_SUCCESS;
+			if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, bytes)) {
+				kfree(temp_buff);
+				return -EFAULT;
+			}
+		} else {
+			Status = bytes;
+		}
 
 		kfree(temp_buff);
 		break;
@@ -437,12 +453,14 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 			}
 		}
 
-		Status = rdmaltWithLock(Adapter, (UINT)GPIO_MODE_REGISTER, (PUINT)ucResetValue, sizeof(UINT));
-
-		if (STATUS_SUCCESS != Status) {
+		bytes = rdmaltWithLock(Adapter, (UINT)GPIO_MODE_REGISTER, (PUINT)ucResetValue, sizeof(UINT));
+		if (bytes < 0) {
+			Status = bytes;
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
 					"GPIO_MODE_REGISTER read failed");
 			break;
+		} else {
+			Status = STATUS_SUCCESS;
 		}
 
 		/* Set the gpio mode register to output */
@@ -519,12 +537,15 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		uiBit = gpio_info.uiGpioNumber;
 
 		/* Set the gpio output register */
-		Status = rdmaltWithLock(Adapter, (UINT)GPIO_PIN_STATE_REGISTER,
+		bytes = rdmaltWithLock(Adapter, (UINT)GPIO_PIN_STATE_REGISTER,
 					(PUINT)ucRead, sizeof(UINT));
 
-		if (Status != STATUS_SUCCESS) {
+		if (bytes < 0) {
+			Status = bytes;
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM Failed\n");
 			return Status;
+		} else {
+			Status = STATUS_SUCCESS;
 		}
 	}
 	break;
@@ -590,11 +611,14 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		}
 
 		if (pgpio_multi_info[WIMAX_IDX].uiGPIOMask) {
-			Status = rdmaltWithLock(Adapter, (UINT)GPIO_PIN_STATE_REGISTER, (PUINT)ucResetValue, sizeof(UINT));
+			bytes = rdmaltWithLock(Adapter, (UINT)GPIO_PIN_STATE_REGISTER, (PUINT)ucResetValue, sizeof(UINT));
 
-			if (Status != STATUS_SUCCESS) {
+			if (bytes < 0) {
+				Status = bytes;
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM to GPIO_PIN_STATE_REGISTER Failed.");
 				return Status;
+			} else {
+				Status = STATUS_SUCCESS;
 			}
 
 			pgpio_multi_info[WIMAX_IDX].uiGPIOValue = (*(UINT *)ucResetValue &
@@ -605,7 +629,7 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		if (Status) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
 					"Failed while copying Content to IOBufer for user space err:%d", Status);
-			break;
+			return -EFAULT;
 		}
 	}
 	break;
@@ -629,11 +653,14 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		if (copy_from_user(&gpio_multi_mode, IoBuffer.InputBuffer, IoBuffer.InputLength))
 			return -EFAULT;
 
-		Status = rdmaltWithLock(Adapter, (UINT)GPIO_MODE_REGISTER, (PUINT)ucResetValue, sizeof(UINT));
+		bytes = rdmaltWithLock(Adapter, (UINT)GPIO_MODE_REGISTER, (PUINT)ucResetValue, sizeof(UINT));
 
-		if (STATUS_SUCCESS != Status) {
+		if (bytes < 0) {
+			Status = bytes;
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Read of GPIO_MODE_REGISTER failed");
 			return Status;
+		} else {
+			Status = STATUS_SUCCESS;
 		}
 
 		/* Validating the request */
@@ -678,7 +705,7 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		if (Status) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
 					"Failed while copying Content to IOBufer for user space err:%d", Status);
-			break;
+			return -EFAULT;
 		}
 	}
 	break;
@@ -706,9 +733,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 			return -ENOMEM;
 
 		if (copy_from_user(pvBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength)) {
-			Status = -EFAULT;
 			kfree(pvBuffer);
-			break;
+			return -EFAULT;
 		}
 
 		down(&Adapter->LowPowerModeSync);
@@ -733,8 +759,7 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 	}
 
 	case IOCTL_BCM_BUFFER_DOWNLOAD_START: {
-		INT NVMAccess = down_trylock(&Adapter->NVMRdmWrmLock);
-		if (NVMAccess) {
+		if (down_trylock(&Adapter->NVMRdmWrmLock)) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
 					"IOCTL_BCM_CHIP_RESET not allowed as EEPROM Read/Write is in progress\n");
 			return -EACCES;
@@ -743,157 +768,162 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
 				"Starting the firmware download PID =0x%x!!!!\n", current->pid);
 
-		if (!down_trylock(&Adapter->fw_download_sema)) {
-			Adapter->bBinDownloaded = FALSE;
-			Adapter->fw_download_process_pid = current->pid;
-			Adapter->bCfgDownloaded = FALSE;
-			Adapter->fw_download_done = FALSE;
-			netif_carrier_off(Adapter->dev);
-			netif_stop_queue(Adapter->dev);
-			Status = reset_card_proc(Adapter);
-			if (Status) {
-				pr_err(PFX "%s: reset_card_proc Failed!\n", Adapter->dev->name);
-				up(&Adapter->fw_download_sema);
-				up(&Adapter->NVMRdmWrmLock);
-				break;
-			}
-			mdelay(10);
-		} else {
-			Status = -EBUSY;
+		if (down_trylock(&Adapter->fw_download_sema))
+			return -EBUSY;
+
+		Adapter->bBinDownloaded = FALSE;
+		Adapter->fw_download_process_pid = current->pid;
+		Adapter->bCfgDownloaded = FALSE;
+		Adapter->fw_download_done = FALSE;
+		netif_carrier_off(Adapter->dev);
+		netif_stop_queue(Adapter->dev);
+		Status = reset_card_proc(Adapter);
+		if (Status) {
+			pr_err(PFX "%s: reset_card_proc Failed!\n", Adapter->dev->name);
+			up(&Adapter->fw_download_sema);
+			up(&Adapter->NVMRdmWrmLock);
+			return Status;
 		}
+		mdelay(10);
 
 		up(&Adapter->NVMRdmWrmLock);
-		break;
+		return Status;
 	}
 
 	case IOCTL_BCM_BUFFER_DOWNLOAD: {
 		FIRMWARE_INFO *psFwInfo = NULL;
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Starting the firmware download PID =0x%x!!!!\n", current->pid);
-		do {
-			if (!down_trylock(&Adapter->fw_download_sema)) {
-				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
-						"Invalid way to download buffer. Use Start and then call this!!!\n");
-				Status = -EINVAL;
-				break;
-			}
-
-			/* Copy Ioctl Buffer structure */
-			if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
-				return -EFAULT;
 
+		if (!down_trylock(&Adapter->fw_download_sema)) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
-					"Length for FW DLD is : %lx\n", IoBuffer.InputLength);
+					"Invalid way to download buffer. Use Start and then call this!!!\n");
+			up(&Adapter->fw_download_sema);
+			Status = -EINVAL;
+			return Status;
+		}
 
-			if (IoBuffer.InputLength > sizeof(FIRMWARE_INFO))
-				return -EINVAL;
+		/* Copy Ioctl Buffer structure */
+		if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER))) {
+			up(&Adapter->fw_download_sema);
+			return -EFAULT;
+		}
 
-			psFwInfo = kmalloc(sizeof(*psFwInfo), GFP_KERNEL);
-			if (!psFwInfo)
-				return -ENOMEM;
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+				"Length for FW DLD is : %lx\n", IoBuffer.InputLength);
 
-			if (copy_from_user(psFwInfo, IoBuffer.InputBuffer, IoBuffer.InputLength))
-				return -EFAULT;
+		if (IoBuffer.InputLength > sizeof(FIRMWARE_INFO)) {
+			up(&Adapter->fw_download_sema);
+			return -EINVAL;
+		}
 
-			if (!psFwInfo->pvMappedFirmwareAddress ||
-				(psFwInfo->u32FirmwareLength == 0)) {
+		psFwInfo = kmalloc(sizeof(*psFwInfo), GFP_KERNEL);
+		if (!psFwInfo) {
+			up(&Adapter->fw_download_sema);
+			return -ENOMEM;
+		}
 
-				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Something else is wrong %lu\n",
-						psFwInfo->u32FirmwareLength);
-				Status = -EINVAL;
-				break;
+		if (copy_from_user(psFwInfo, IoBuffer.InputBuffer, IoBuffer.InputLength)) {
+			up(&Adapter->fw_download_sema);
+			return -EFAULT;
+		}
+
+		if (!psFwInfo->pvMappedFirmwareAddress ||
+			(psFwInfo->u32FirmwareLength == 0)) {
+
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Something else is wrong %lu\n",
+					psFwInfo->u32FirmwareLength);
+			up(&Adapter->fw_download_sema);
+			Status = -EINVAL;
+			return Status;
+		}
+
+		Status = bcm_ioctl_fw_download(Adapter, psFwInfo);
+
+		if (Status != STATUS_SUCCESS) {
+			if (psFwInfo->u32StartingAddress == CONFIG_BEGIN_ADDR)
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "IOCTL: Configuration File Upload Failed\n");
+			else
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,	"IOCTL: Firmware File Upload Failed\n");
+
+			/* up(&Adapter->fw_download_sema); */
+
+			if (Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY) {
+				Adapter->DriverState = DRIVER_INIT;
+				Adapter->LEDInfo.bLedInitDone = FALSE;
+				wake_up(&Adapter->LEDInfo.notify_led_event);
 			}
-
-			Status = bcm_ioctl_fw_download(Adapter, psFwInfo);
-
-			if (Status != STATUS_SUCCESS) {
-				if (psFwInfo->u32StartingAddress == CONFIG_BEGIN_ADDR)
-					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "IOCTL: Configuration File Upload Failed\n");
-				else
-					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,	"IOCTL: Firmware File Upload Failed\n");
-
-				/* up(&Adapter->fw_download_sema); */
-
-				if (Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY) {
-					Adapter->DriverState = DRIVER_INIT;
-					Adapter->LEDInfo.bLedInitDone = FALSE;
-					wake_up(&Adapter->LEDInfo.notify_led_event);
-				}
-			}
-			break;
-
-		} while (0);
+		}
 
 		if (Status != STATUS_SUCCESS)
 			up(&Adapter->fw_download_sema);
 
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, OSAL_DBG, DBG_LVL_ALL, "IOCTL: Firmware File Uploaded\n");
 		kfree(psFwInfo);
-		break;
+		return Status;
 	}
 
 	case IOCTL_BCM_BUFFER_DOWNLOAD_STOP: {
-		INT NVMAccess = down_trylock(&Adapter->NVMRdmWrmLock);
+		if (!down_trylock(&Adapter->fw_download_sema)) {
+			up(&Adapter->fw_download_sema);
+			return -EINVAL;
+		}
 
-		if (NVMAccess) {
+		if (down_trylock(&Adapter->NVMRdmWrmLock)) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
 					"FW download blocked as EEPROM Read/Write is in progress\n");
 			up(&Adapter->fw_download_sema);
 			return -EACCES;
 		}
 
-		if (down_trylock(&Adapter->fw_download_sema)) {
-			Adapter->bBinDownloaded = TRUE;
-			Adapter->bCfgDownloaded = TRUE;
-			atomic_set(&Adapter->CurrNumFreeTxDesc, 0);
-			Adapter->CurrNumRecvDescs = 0;
-			Adapter->downloadDDR = 0;
+		Adapter->bBinDownloaded = TRUE;
+		Adapter->bCfgDownloaded = TRUE;
+		atomic_set(&Adapter->CurrNumFreeTxDesc, 0);
+		Adapter->CurrNumRecvDescs = 0;
+		Adapter->downloadDDR = 0;
 
-			/* setting the Mips to Run */
-			Status = run_card_proc(Adapter);
+		/* setting the Mips to Run */
+		Status = run_card_proc(Adapter);
 
-			if (Status) {
-				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Firm Download Failed\n");
-				up(&Adapter->fw_download_sema);
-				up(&Adapter->NVMRdmWrmLock);
-				break;
-			} else {
-				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
-						DBG_LVL_ALL, "Firm Download Over...\n");
-			}
-
-			mdelay(10);
-
-			/* Wait for MailBox Interrupt */
-			if (StartInterruptUrb((PS_INTERFACE_ADAPTER)Adapter->pvInterfaceAdapter))
-				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Unable to send interrupt...\n");
-
-			timeout = 5*HZ;
-			Adapter->waiting_to_fw_download_done = FALSE;
-			wait_event_timeout(Adapter->ioctl_fw_dnld_wait_queue,
-					Adapter->waiting_to_fw_download_done, timeout);
-			Adapter->fw_download_process_pid = INVALID_PID;
-			Adapter->fw_download_done = TRUE;
-			atomic_set(&Adapter->CurrNumFreeTxDesc, 0);
-			Adapter->CurrNumRecvDescs = 0;
-			Adapter->PrevNumRecvDescs = 0;
-			atomic_set(&Adapter->cntrlpktCnt, 0);
-			Adapter->LinkUpStatus = 0;
-			Adapter->LinkStatus = 0;
-
-			if (Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY) {
-				Adapter->DriverState = FW_DOWNLOAD_DONE;
-				wake_up(&Adapter->LEDInfo.notify_led_event);
-			}
-
-			if (!timeout)
-				Status = -ENODEV;
+		if (Status) {
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Firm Download Failed\n");
+			up(&Adapter->fw_download_sema);
+			up(&Adapter->NVMRdmWrmLock);
+			return Status;
 		} else {
-			Status = -EINVAL;
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+					DBG_LVL_ALL, "Firm Download Over...\n");
 		}
 
+		mdelay(10);
+
+		/* Wait for MailBox Interrupt */
+		if (StartInterruptUrb((PS_INTERFACE_ADAPTER)Adapter->pvInterfaceAdapter))
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Unable to send interrupt...\n");
+
+		timeout = 5*HZ;
+		Adapter->waiting_to_fw_download_done = FALSE;
+		wait_event_timeout(Adapter->ioctl_fw_dnld_wait_queue,
+				Adapter->waiting_to_fw_download_done, timeout);
+		Adapter->fw_download_process_pid = INVALID_PID;
+		Adapter->fw_download_done = TRUE;
+		atomic_set(&Adapter->CurrNumFreeTxDesc, 0);
+		Adapter->CurrNumRecvDescs = 0;
+		Adapter->PrevNumRecvDescs = 0;
+		atomic_set(&Adapter->cntrlpktCnt, 0);
+		Adapter->LinkUpStatus = 0;
+		Adapter->LinkStatus = 0;
+
+		if (Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY) {
+			Adapter->DriverState = FW_DOWNLOAD_DONE;
+			wake_up(&Adapter->LEDInfo.notify_led_event);
+		}
+
+		if (!timeout)
+			Status = -ENODEV;
+
 		up(&Adapter->fw_download_sema);
 		up(&Adapter->NVMRdmWrmLock);
-		break;
+		return Status;
 	}
 
 	case IOCTL_BE_BUCKET_SIZE:
@@ -985,8 +1015,7 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		/* Copy Ioctl Buffer structure */
 		if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER))) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "copy_from_user failed..\n");
-			Status = -EFAULT;
-			break;
+			return -EFAULT;
 		}
 
 		if (IoBuffer.OutputLength != sizeof(link_state)) {
@@ -1001,8 +1030,7 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 
 		if (copy_to_user(IoBuffer.OutputBuffer, &link_state, min_t(size_t, sizeof(link_state), IoBuffer.OutputLength))) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy_to_user Failed..\n");
-			Status = -EFAULT;
-			break;
+			return -EFAULT;
 		}
 		Status = STATUS_SUCCESS;
 		break;
@@ -1068,8 +1096,10 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		GetDroppedAppCntrlPktMibs(temp_buff, pTarang);
 
 		if (Status != STATUS_FAILURE)
-			if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, sizeof(S_MIBS_HOST_STATS_MIBS)))
-				Status = -EFAULT;
+			if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, sizeof(S_MIBS_HOST_STATS_MIBS))) {
+				kfree(temp_buff);
+				return -EFAULT;
+			}
 
 		kfree(temp_buff);
 		break;
@@ -1111,8 +1141,7 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		/* Get WrmBuffer structure */
 		if (copy_from_user(pvBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength)) {
 			kfree(pvBuffer);
-			Status = -EFAULT;
-			break;
+			return -EFAULT;
 		}
 
 		pBulkBuffer = (PBULKWRM_BUFFER)pvBuffer;
@@ -1242,8 +1271,7 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		memset(&tv1, 0, sizeof(struct timeval));
 		if ((Adapter->eNVMType == NVM_FLASH) && (Adapter->uiFlashLayoutMajorVersion == 0)) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "The Flash Control Section is Corrupted. Hence Rejection on NVM Read/Write\n");
-			Status = -EFAULT;
-			break;
+			return -EFAULT;
 		}
 
 		if (IsFlash2x(Adapter)) {
@@ -1252,7 +1280,7 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 				(Adapter->eActiveDSD != DSD2)) {
 
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "No DSD is active..hence NVM Command is blocked");
-				return STATUS_FAILURE ;
+				return STATUS_FAILURE;
 			}
 		}
 
@@ -1271,8 +1299,7 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 
 		if ((stNVMReadWrite.uiOffset + stNVMReadWrite.uiNumBytes) > Adapter->uiNVMDSDSize) {
 			/* BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Can't allow access beyond NVM Size: 0x%x 0x%x\n", stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes); */
-			Status = STATUS_FAILURE;
-			break;
+			return STATUS_FAILURE;
 		}
 
 		pReadData = kzalloc(stNVMReadWrite.uiNumBytes, GFP_KERNEL);
@@ -1280,9 +1307,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 			return -ENOMEM;
 
 		if (copy_from_user(pReadData, stNVMReadWrite.pBuffer, stNVMReadWrite.uiNumBytes)) {
-			Status = -EFAULT;
 			kfree(pReadData);
-			break;
+			return -EFAULT;
 		}
 
 		do_gettimeofday(&tv0);
@@ -1309,7 +1335,7 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 
 			if (copy_to_user(stNVMReadWrite.pBuffer, pReadData, stNVMReadWrite.uiNumBytes)) {
 				kfree(pReadData);
-				Status = -EFAULT;
+				return -EFAULT;
 			}
 		} else {
 			down(&Adapter->NVMRdmWrmLock);
@@ -1377,9 +1403,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, " timetaken by Write/read :%ld msec\n", (tv1.tv_sec - tv0.tv_sec)*1000 + (tv1.tv_usec - tv0.tv_usec)/1000);
 
 		kfree(pReadData);
-		Status = STATUS_SUCCESS;
+		return STATUS_SUCCESS;
 	}
-	break;
 
 	case IOCTL_BCM_FLASH2X_SECTION_READ: {
 		FLASH2X_READWRITE sFlash2xRead = {0};
@@ -1456,7 +1481,9 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 			Status = copy_to_user(OutPutBuff, pReadBuff, ReadBytes);
 			if (Status) {
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Copy to use failed with status :%d", Status);
-				break;
+				up(&Adapter->NVMRdmWrmLock);
+				kfree(pReadBuff);
+				return -EFAULT;
 			}
 			NOB = NOB - ReadBytes;
 			if (NOB) {
@@ -1548,7 +1575,9 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 			Status = copy_from_user(pWriteBuff, InputAddr, WriteBytes);
 			if (Status) {
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy to user failed with status :%d", Status);
-				break;
+				up(&Adapter->NVMRdmWrmLock);
+				kfree(pWriteBuff);
+				return -EFAULT;
 			}
 			BCM_DEBUG_PRINT_BUFFER(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, pWriteBuff, WriteBytes);
 
@@ -1608,8 +1637,10 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 
 		BcmGetFlash2xSectionalBitMap(Adapter, psFlash2xBitMap);
 		up(&Adapter->NVMRdmWrmLock);
-		if (copy_to_user(IoBuffer.OutputBuffer, psFlash2xBitMap, sizeof(FLASH2X_BITMAP)))
-			Status = -EFAULT;
+		if (copy_to_user(IoBuffer.OutputBuffer, psFlash2xBitMap, sizeof(FLASH2X_BITMAP))) {
+			kfree(psFlash2xBitMap);
+			return -EFAULT;
+		}
 
 		kfree(psFlash2xBitMap);
 	}
@@ -1627,13 +1658,13 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
 		if (Status) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy of IOCTL BUFFER failed");
-			return Status;
+			return -EFAULT;
 		}
 
 		Status = copy_from_user(&eFlash2xSectionVal, IoBuffer.InputBuffer, sizeof(INT));
 		if (Status) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy of flash section val failed");
-			return Status;
+			return -EFAULT;
 		}
 
 		down(&Adapter->NVMRdmWrmLock);
@@ -1677,13 +1708,13 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
 		if (Status) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy of IOCTL BUFFER failed Status :%d", Status);
-			return Status;
+			return -EFAULT;
 		}
 
 		Status = copy_from_user(&sCopySectStrut, IoBuffer.InputBuffer, sizeof(FLASH2X_COPY_SECTION));
 		if (Status) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy of Copy_Section_Struct failed with Status :%d", Status);
-			return Status;
+			return -EFAULT;
 		}
 
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Source SEction :%x", sCopySectStrut.SrcSection);
@@ -1744,7 +1775,7 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
 		if (Status) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy of IOCTL BUFFER failed");
-			break;
+			return -EFAULT;
 		}
 
 		if (Adapter->eNVMType != NVM_FLASH) {
@@ -1783,12 +1814,12 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
 		if (Status) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy of IOCTL BUFFER failed");
-			return Status;
+			return -EFAULT;
 		}
 		Status = copy_from_user(&eFlash2xSectionVal, IoBuffer.InputBuffer, sizeof(INT));
 		if (Status) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy of flash section val failed");
-			return Status;
+			return -EFAULT;
 		}
 
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Read Section :%d", eFlash2xSectionVal);
@@ -1830,8 +1861,7 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		/* Copy Ioctl Buffer structure */
 		if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER))) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "copy_from_user 1 failed\n");
-			Status = -EFAULT;
-			break;
+			return -EFAULT;
 		}
 
 		if (copy_from_user(&stNVMRead, IoBuffer.OutputBuffer, sizeof(NVM_READWRITE)))
@@ -1886,7 +1916,9 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 			Status = copy_to_user(OutPutBuff, pReadBuff, ReadBytes);
 			if (Status) {
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy to use failed with status :%d", Status);
-				break;
+				up(&Adapter->NVMRdmWrmLock);
+				kfree(pReadBuff);
+				return -EFAULT;
 			}
 			NOB = NOB - ReadBytes;
 			if (NOB) {
@@ -1907,8 +1939,7 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
 		if (Status) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "copy of Ioctl buffer is failed from user space");
-			Status = -EFAULT;
-			break;
+			return -EFAULT;
 		}
 
 		if (IoBuffer.InputLength != sizeof(unsigned long)) {
@@ -1919,8 +1950,7 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		Status = copy_from_user(&RxCntrlMsgBitMask, IoBuffer.InputBuffer, IoBuffer.InputLength);
 		if (Status) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "copy of control bit mask failed from user space");
-			Status = -EFAULT;
-			break;
+			return -EFAULT;
 		}
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\n Got user defined cntrl msg bit mask :%lx", RxCntrlMsgBitMask);
 		pTarang->RxCntrlMsgBitMask = RxCntrlMsgBitMask;

drivers/staging/bcm/InterfaceDld.c

@@ -62,6 +62,7 @@ int InterfaceFileReadbackFromChip(PVOID arg, struct file *flp, unsigned int on_c
 	static int fw_down;
 	INT Status = STATUS_SUCCESS;
 	PS_INTERFACE_ADAPTER psIntfAdapter = (PS_INTERFACE_ADAPTER)arg;
+	int bytes;
 
 	buff = kmalloc(MAX_TRANSFER_CTRL_BYTE_USB, GFP_DMA);
 	buff_readback = kmalloc(MAX_TRANSFER_CTRL_BYTE_USB , GFP_DMA);
@@ -94,8 +95,9 @@ int InterfaceFileReadbackFromChip(PVOID arg, struct file *flp, unsigned int on_c
 			break;
 		}
 
-		Status = InterfaceRDM(psIntfAdapter, on_chip_loc, buff_readback, len);
-		if (Status) {
+		bytes = InterfaceRDM(psIntfAdapter, on_chip_loc, buff_readback, len);
+		if (bytes < 0) {
+			Status = bytes;
 			BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "RDM of len %d Failed! %d", len, reg);
 			goto exit;
 		}
@@ -302,6 +304,7 @@ static INT buffRdbkVerify(PMINI_ADAPTER Adapter, PUCHAR mappedbuffer, UINT u32Fi
 	UINT len = u32FirmwareLength;
 	INT retval = STATUS_SUCCESS;
 	PUCHAR readbackbuff = kzalloc(MAX_TRANSFER_CTRL_BYTE_USB, GFP_KERNEL);
+	int bytes;
 
 	if (NULL == readbackbuff) {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "MEMORY ALLOCATION FAILED");
@@ -310,9 +313,10 @@ static INT buffRdbkVerify(PMINI_ADAPTER Adapter, PUCHAR mappedbuffer, UINT u32Fi
 
 	while (u32FirmwareLength && !retval) {
 		len = MIN_VAL(u32FirmwareLength, MAX_TRANSFER_CTRL_BYTE_USB);
-		retval = rdm(Adapter, u32StartingAddress, readbackbuff, len);
+		bytes = rdm(Adapter, u32StartingAddress, readbackbuff, len);
 
-		if (retval) {
+		if (bytes < 0) {
+			retval = bytes;
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "rdm failed with status %d", retval);
 			break;
 		}

drivers/staging/bcm/InterfaceIdleMode.c

@@ -46,6 +46,7 @@ int InterfaceIdleModeRespond(PMINI_ADAPTER Adapter, unsigned int* puiBuffer)
 {
 	int	status = STATUS_SUCCESS;
 	unsigned int	uiRegRead = 0;
+	int bytes;
 
 	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"SubType of Message :0x%X", ntohl(*puiBuffer));
 
@@ -77,16 +78,16 @@ int InterfaceIdleModeRespond(PMINI_ADAPTER Adapter, unsigned int* puiBuffer)
 			else if(Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)
 			{
 				//clear on read Register
-				status = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegRead, sizeof(uiRegRead));
-				if(status)
-				{
+				bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegRead, sizeof(uiRegRead));
+				if (bytes < 0) {
+					status = bytes;
 					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg0");
 					return status;
 				}
 				//clear on read Register
-				status = rdmalt (Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegRead, sizeof(uiRegRead));
-				if(status)
-				{
+				bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegRead, sizeof(uiRegRead));
+				if (bytes < 0) {
+					status = bytes;
 					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort	Reg1");
 					return status;
 				}
@@ -117,9 +118,9 @@ int InterfaceIdleModeRespond(PMINI_ADAPTER Adapter, unsigned int* puiBuffer)
 					Adapter->chip_id== BCS220_3)
 			{
 
-				status = rdmalt(Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
-				if(status)
-				{
+				bytes = rdmalt(Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
+				if (bytes < 0) {
+					status = bytes;
 					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "rdm failed while Reading HPM_CONFIG_LDO145 Reg 0\n");
 					return status;
 				}
@@ -266,6 +267,8 @@ void InterfaceHandleShutdownModeWakeup(PMINI_ADAPTER Adapter)
 {
 	unsigned int uiRegVal = 0;
 	INT Status = 0;
+	int bytes;
+
 	if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
 	{
 		// clear idlemode interrupt.
@@ -282,16 +285,16 @@ void InterfaceHandleShutdownModeWakeup(PMINI_ADAPTER Adapter)
 	{
 
         //clear Interrupt EP registers.
-		Status = rdmalt(Adapter,DEVICE_INT_OUT_EP_REG0, &uiRegVal, sizeof(uiRegVal));
-		if(Status)
-		{
+		bytes = rdmalt(Adapter,DEVICE_INT_OUT_EP_REG0, &uiRegVal, sizeof(uiRegVal));
+		if (bytes < 0) {
+			Status = bytes;
 			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"RDM of DEVICE_INT_OUT_EP_REG0 failed with Err :%d", Status);
 			return;
 		}
 
-        Status = rdmalt(Adapter,DEVICE_INT_OUT_EP_REG1, &uiRegVal, sizeof(uiRegVal));
-		if(Status)
-		{
+		bytes = rdmalt(Adapter,DEVICE_INT_OUT_EP_REG1, &uiRegVal, sizeof(uiRegVal));
+		if (bytes < 0) {
+			Status = bytes;
 			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"RDM of DEVICE_INT_OUT_EP_REG1 failed with Err :%d", Status);
 			return;
 		}

drivers/staging/bcm/InterfaceInit.c

@@ -68,7 +68,7 @@ static void InterfaceAdapterFree(PS_INTERFACE_ADAPTER psIntfAdapter)
 static void ConfigureEndPointTypesThroughEEPROM(PMINI_ADAPTER Adapter)
 {
 	unsigned long ulReg = 0;
-	int ret;
+	int bytes;
 
 	/* Program EP2 MAX_PKT_SIZE */
 	ulReg = ntohl(EP2_MPS_REG);
@@ -94,8 +94,8 @@ static void ConfigureEndPointTypesThroughEEPROM(PMINI_ADAPTER Adapter)
 	BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x140, 4, TRUE);
 
 	/* Program TX EP as interrupt(Alternate Setting) */
-	ret = rdmalt(Adapter, 0x0F0110F8, (u32 *)&ulReg, sizeof(u32));
-	if (ret) {
+	bytes = rdmalt(Adapter, 0x0F0110F8, (u32 *)&ulReg, sizeof(u32));
+	if (bytes < 0) {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
 			"reading of Tx EP failed\n");
 		return;
@@ -430,6 +430,7 @@ static int InterfaceAdapterInit(PS_INTERFACE_ADAPTER psIntfAdapter)
 	int usedIntOutForBulkTransfer = 0 ;
 	BOOLEAN bBcm16 = FALSE;
 	UINT uiData = 0;
+	int bytes;
 
 	/* Store the usb dev into interface adapter */
 	psIntfAdapter->udev = usb_get_dev(interface_to_usbdev(psIntfAdapter->interface));
@@ -438,9 +439,10 @@ static int InterfaceAdapterInit(PS_INTERFACE_ADAPTER psIntfAdapter)
 	psIntfAdapter->psAdapter->interface_rdm = BcmRDM;
 	psIntfAdapter->psAdapter->interface_wrm = BcmWRM;
 
-	retval = rdmalt(psIntfAdapter->psAdapter, CHIP_ID_REG,
+	bytes = rdmalt(psIntfAdapter->psAdapter, CHIP_ID_REG,
 			(u32 *)&(psIntfAdapter->psAdapter->chip_id), sizeof(u32));
-	if (retval) {
+	if (bytes < 0) {
+		retval = bytes;
 		BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_PRINTK, 0, 0, "CHIP ID Read Failed\n");
 		return retval;
 	}

drivers/staging/bcm/InterfaceMisc.c

@@ -5,7 +5,7 @@ INT InterfaceRDM(PS_INTERFACE_ADAPTER psIntfAdapter,
 		PVOID buff,
 		INT len)
 {
-	int retval = 0;
+	int bytes;
 	USHORT usRetries = 0;
 
 	if (psIntfAdapter == NULL) {
@@ -30,7 +30,7 @@ INT InterfaceRDM(PS_INTERFACE_ADAPTER psIntfAdapter,
 	psIntfAdapter->psAdapter->DeviceAccess = TRUE;
 
 	do {
-		retval = usb_control_msg(psIntfAdapter->udev,
+		bytes = usb_control_msg(psIntfAdapter->udev,
 					usb_rcvctrlpipe(psIntfAdapter->udev, 0),
 					0x02,
 					0xC2,
@@ -41,22 +41,20 @@ INT InterfaceRDM(PS_INTERFACE_ADAPTER psIntfAdapter,
 					5000);
 
 		usRetries++;
-		if (-ENODEV == retval) {
+		if (-ENODEV == bytes) {
 			psIntfAdapter->psAdapter->device_removed = TRUE;
 			break;
 		}
 
-	} while ((retval < 0) && (usRetries < MAX_RDM_WRM_RETIRES));
+	} while ((bytes < 0) && (usRetries < MAX_RDM_WRM_RETIRES));
 
-	if (retval < 0)	{
-		BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_OTHERS, RDM, DBG_LVL_ALL, "RDM failed status :%d, retires :%d", retval, usRetries);
-		psIntfAdapter->psAdapter->DeviceAccess = FALSE;
-		return retval;
-	} else {
-		BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_OTHERS, RDM, DBG_LVL_ALL, "RDM sent %d", retval);
-		psIntfAdapter->psAdapter->DeviceAccess = FALSE;
-		return STATUS_SUCCESS;
-	}
+	if (bytes < 0)
+		BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_OTHERS, RDM, DBG_LVL_ALL, "RDM failed status :%d, retires :%d", bytes, usRetries);
+	else
+		BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_OTHERS, RDM, DBG_LVL_ALL, "RDM sent %d", bytes);
+
+	psIntfAdapter->psAdapter->DeviceAccess = FALSE;
+	return bytes;
 }
 
 INT InterfaceWRM(PS_INTERFACE_ADAPTER psIntfAdapter,

drivers/staging/bcm/Misc.c

@@ -814,6 +814,7 @@ int reset_card_proc(PMINI_ADAPTER ps_adapter)
 	PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
 	PS_INTERFACE_ADAPTER psIntfAdapter = NULL;
 	unsigned int value = 0, uiResetValue = 0;
+	int bytes;
 
 	psIntfAdapter = ((PS_INTERFACE_ADAPTER)(ps_adapter->pvInterfaceAdapter));
 	ps_adapter->bDDRInitDone = FALSE;
@@ -848,8 +849,9 @@ int reset_card_proc(PMINI_ADAPTER ps_adapter)
 			ps_adapter->chip_id == BCS250_BC ||
 			ps_adapter->chip_id == BCS220_3) {
 
-			retval = rdmalt(ps_adapter, HPM_CONFIG_LDO145, &value, sizeof(value));
-			if (retval < 0) {
+			bytes = rdmalt(ps_adapter, HPM_CONFIG_LDO145, &value, sizeof(value));
+			if (bytes < 0) {
+				retval = bytes;
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "read failed with status :%d", retval);
 				goto err_exit;
 			}
@@ -862,8 +864,9 @@ int reset_card_proc(PMINI_ADAPTER ps_adapter)
 			}
 		}
 	} else {
-		retval = rdmalt(ps_adapter, 0x0f007018, &value, sizeof(value));
-		if (retval < 0) {
+		bytes = rdmalt(ps_adapter, 0x0f007018, &value, sizeof(value));
+		if (bytes < 0) {
+			retval = bytes;
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "read failed with status :%d", retval);
 			goto err_exit;
 		}
@@ -925,11 +928,16 @@ int reset_card_proc(PMINI_ADAPTER ps_adapter)
 
 int run_card_proc(PMINI_ADAPTER ps_adapter)
 {
+	int status = STATUS_SUCCESS;
+	int bytes;
+
 	unsigned int value = 0;
 	{
-		if (rdmalt(ps_adapter, CLOCK_RESET_CNTRL_REG_1, &value, sizeof(value)) < 0) {
+		bytes = rdmalt(ps_adapter, CLOCK_RESET_CNTRL_REG_1, &value, sizeof(value));
+		if (bytes < 0) {
+			status = bytes;
 			BCM_DEBUG_PRINT(ps_adapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "%s:%d\n", __func__, __LINE__);
-			return STATUS_FAILURE;
+			return status;
 		}
 
 		if (ps_adapter->bFlashBoot)
@@ -942,7 +950,7 @@ int run_card_proc(PMINI_ADAPTER ps_adapter)
 			return STATUS_FAILURE;
 		}
 	}
-	return STATUS_SUCCESS;
+	return status;
 }
 
 int InitCardAndDownloadFirmware(PMINI_ADAPTER ps_adapter)
@@ -1215,6 +1223,7 @@ static unsigned char *ReadMacAddrEEPROM(PMINI_ADAPTER Adapter, ulong dwAddress)
 	int status = 0, i = 0;
 	unsigned int temp = 0;
 	unsigned char *pucmacaddr = kmalloc(MAC_ADDRESS_SIZE, GFP_KERNEL);
+	int bytes;
 
 	if (!pucmacaddr) {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "No Buffers to Read the EEPROM Address\n");
@@ -1231,8 +1240,9 @@ static unsigned char *ReadMacAddrEEPROM(PMINI_ADAPTER Adapter, ulong dwAddress)
 	}
 
 	for (i = 0; i < MAC_ADDRESS_SIZE; i++) {
-		status = rdmalt(Adapter, EEPROM_READ_DATA_Q_REG, &temp, sizeof(temp));
-		if (status != STATUS_SUCCESS) {
+		bytes = rdmalt(Adapter, EEPROM_READ_DATA_Q_REG, &temp, sizeof(temp));
+		if (bytes < 0) {
+			status = bytes;
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm Failed..\n");
 			kfree(pucmacaddr);
 			pucmacaddr = NULL;
@@ -1574,11 +1584,13 @@ void update_per_sf_desc_cnts(PMINI_ADAPTER Adapter)
 {
 	INT iIndex = 0;
 	u32 uibuff[MAX_TARGET_DSX_BUFFERS];
+	int bytes;
 
 	if (!atomic_read(&Adapter->uiMBupdate))
 		return;
 
-	if (rdmaltWithLock(Adapter, TARGET_SFID_TXDESC_MAP_LOC, (PUINT)uibuff, sizeof(UINT) * MAX_TARGET_DSX_BUFFERS) < 0) {
+	bytes = rdmaltWithLock(Adapter, TARGET_SFID_TXDESC_MAP_LOC, (PUINT)uibuff, sizeof(UINT) * MAX_TARGET_DSX_BUFFERS);
+	if (bytes < 0) {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm failed\n");
 		return;
 	}

drivers/staging/bcm/hostmibs.c

@@ -1,4 +1,3 @@
-
 /*
  * File Name: hostmibs.c
  *
@@ -6,73 +5,72 @@
  *
  * Abstract: This file contains the routines to copy the statistics used by
  * the driver to the Host MIBS structure and giving the same to Application.
- *
  */
+
 #include "headers.h"
 
-INT  ProcessGetHostMibs(PMINI_ADAPTER Adapter, S_MIBS_HOST_STATS_MIBS *pstHostMibs)
+INT ProcessGetHostMibs(PMINI_ADAPTER Adapter, S_MIBS_HOST_STATS_MIBS *pstHostMibs)
 {
-	S_SERVICEFLOW_ENTRY    *pstServiceFlowEntry = NULL;
-	S_PHS_RULE             *pstPhsRule          = NULL;
-	S_CLASSIFIER_TABLE     *pstClassifierTable  = NULL;
-	S_CLASSIFIER_ENTRY     *pstClassifierRule   = NULL;
-	PPHS_DEVICE_EXTENSION  pDeviceExtension     = (PPHS_DEVICE_EXTENSION)&Adapter->stBCMPhsContext;
+	S_SERVICEFLOW_ENTRY *pstServiceFlowEntry = NULL;
+	S_PHS_RULE *pstPhsRule = NULL;
+	S_CLASSIFIER_TABLE *pstClassifierTable = NULL;
+	S_CLASSIFIER_ENTRY *pstClassifierRule = NULL;
+	PPHS_DEVICE_EXTENSION pDeviceExtension = (PPHS_DEVICE_EXTENSION) &Adapter->stBCMPhsContext;
 
-	UINT nClassifierIndex = 0, nPhsTableIndex = 0,nSfIndex = 0, uiIndex = 0;
+	UINT nClassifierIndex = 0, nPhsTableIndex = 0, nSfIndex = 0, uiIndex = 0;
 
-	if(pDeviceExtension == NULL)
-	{
-		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, HOST_MIBS, DBG_LVL_ALL, "Invalid Device Extension\n");
+	if (pDeviceExtension == NULL) {
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, HOST_MIBS, DBG_LVL_ALL, "Invalid Device Extension\n");
 		return STATUS_FAILURE;
 	}
 
-	//Copy the classifier Table
-	for(nClassifierIndex=0; nClassifierIndex < MAX_CLASSIFIERS;
-			nClassifierIndex++)
-	{
-		if(Adapter->astClassifierTable[nClassifierIndex].bUsed == TRUE)
-			memcpy((PVOID)&pstHostMibs->astClassifierTable[nClassifierIndex],
-				(PVOID)&Adapter->astClassifierTable[nClassifierIndex],
-				sizeof(S_MIBS_CLASSIFIER_RULE));
+	/* Copy the classifier Table */
+	for (nClassifierIndex = 0; nClassifierIndex < MAX_CLASSIFIERS; nClassifierIndex++) {
+		if (Adapter->astClassifierTable[nClassifierIndex].bUsed == TRUE)
+			memcpy((PVOID) & pstHostMibs->
+			       astClassifierTable[nClassifierIndex],
+			       (PVOID) & Adapter->
+			       astClassifierTable[nClassifierIndex],
+			       sizeof(S_MIBS_CLASSIFIER_RULE));
 	}
 
-  //Copy the SF Table
-	for(nSfIndex=0; nSfIndex < NO_OF_QUEUES ; nSfIndex++)
-	{
-	if(Adapter->PackInfo[nSfIndex].bValid)
-	{
-			memcpy((PVOID)&pstHostMibs->astSFtable[nSfIndex],(PVOID)&Adapter->PackInfo[nSfIndex],sizeof(S_MIBS_SERVICEFLOW_TABLE));
-	}
-	else
-	{
-		//if index in not valid, don't process this for the PHS table. Go For the next entry.
-		continue ;
-	}
-
-		//Retrieve the SFID Entry Index for requested Service Flow
-		if(PHS_INVALID_TABLE_INDEX == GetServiceFlowEntry(pDeviceExtension->pstServiceFlowPhsRulesTable,
-						  Adapter->PackInfo[nSfIndex].usVCID_Value ,&pstServiceFlowEntry))
-		{
-
-		continue;
+	/* Copy the SF Table */
+	for (nSfIndex = 0; nSfIndex < NO_OF_QUEUES; nSfIndex++) {
+		if (Adapter->PackInfo[nSfIndex].bValid) {
+			memcpy((PVOID) & pstHostMibs->astSFtable[nSfIndex],
+			       (PVOID) & Adapter->PackInfo[nSfIndex],
+			       sizeof(S_MIBS_SERVICEFLOW_TABLE));
+		} else {
+			/* If index in not valid,
+			 * don't process this for the PHS table.
+			 * Go For the next entry.
+			 */
+			continue;
 		}
 
+		/* Retrieve the SFID Entry Index for requested Service Flow */
+		if (PHS_INVALID_TABLE_INDEX ==
+		    GetServiceFlowEntry(pDeviceExtension->
+					pstServiceFlowPhsRulesTable,
+					Adapter->PackInfo[nSfIndex].
+					usVCID_Value, &pstServiceFlowEntry))
+
+			continue;
+
 		pstClassifierTable = pstServiceFlowEntry->pstClassifierTable;
 
-
-		for(uiIndex = 0; uiIndex < MAX_PHSRULE_PER_SF; uiIndex++)
-		{
+		for (uiIndex = 0; uiIndex < MAX_PHSRULE_PER_SF; uiIndex++) {
 			pstClassifierRule = &pstClassifierTable->stActivePhsRulesList[uiIndex];
 
-		if(pstClassifierRule->bUsed)
-		{
-			pstPhsRule = pstClassifierRule->pstPhsRule;
+			if (pstClassifierRule->bUsed) {
+				pstPhsRule = pstClassifierRule->pstPhsRule;
 
-			pstHostMibs->astPhsRulesTable[nPhsTableIndex].ulSFID = Adapter->PackInfo[nSfIndex].ulSFID;
+				pstHostMibs->astPhsRulesTable[nPhsTableIndex].
+				    ulSFID = Adapter->PackInfo[nSfIndex].ulSFID;
 
-			memcpy(&pstHostMibs->astPhsRulesTable[nPhsTableIndex].u8PHSI,
-						&pstPhsRule->u8PHSI,
-						sizeof(S_PHS_RULE));
+				memcpy(&pstHostMibs->
+				       astPhsRulesTable[nPhsTableIndex].u8PHSI,
+				       &pstPhsRule->u8PHSI, sizeof(S_PHS_RULE));
 				nPhsTableIndex++;
 
 			}
@@ -81,65 +79,63 @@ INT  ProcessGetHostMibs(PMINI_ADAPTER Adapter, S_MIBS_HOST_STATS_MIBS *pstHostMi
 
 	}
 
-
-	//copy other Host Statistics parameters
+	/* Copy other Host Statistics parameters */
 	pstHostMibs->stHostInfo.GoodTransmits = Adapter->dev->stats.tx_packets;
 	pstHostMibs->stHostInfo.GoodReceives = Adapter->dev->stats.rx_packets;
-	pstHostMibs->stHostInfo.CurrNumFreeDesc =
-			atomic_read(&Adapter->CurrNumFreeTxDesc);
+	pstHostMibs->stHostInfo.CurrNumFreeDesc = atomic_read(&Adapter->CurrNumFreeTxDesc);
 	pstHostMibs->stHostInfo.BEBucketSize = Adapter->BEBucketSize;
 	pstHostMibs->stHostInfo.rtPSBucketSize = Adapter->rtPSBucketSize;
 	pstHostMibs->stHostInfo.TimerActive = Adapter->TimerActive;
 	pstHostMibs->stHostInfo.u32TotalDSD = Adapter->u32TotalDSD;
 
-	memcpy(pstHostMibs->stHostInfo.aTxPktSizeHist,Adapter->aTxPktSizeHist,sizeof(UINT32)*MIBS_MAX_HIST_ENTRIES);
-	memcpy(pstHostMibs->stHostInfo.aRxPktSizeHist,Adapter->aRxPktSizeHist,sizeof(UINT32)*MIBS_MAX_HIST_ENTRIES);
+	memcpy(pstHostMibs->stHostInfo.aTxPktSizeHist, Adapter->aTxPktSizeHist, sizeof(UINT32) * MIBS_MAX_HIST_ENTRIES);
+	memcpy(pstHostMibs->stHostInfo.aRxPktSizeHist, Adapter->aRxPktSizeHist, sizeof(UINT32) * MIBS_MAX_HIST_ENTRIES);
 
 	return STATUS_SUCCESS;
 }
 
-
 VOID GetDroppedAppCntrlPktMibs(S_MIBS_HOST_STATS_MIBS *pstHostMibs, const PPER_TARANG_DATA pTarang)
 {
 	memcpy(&(pstHostMibs->stDroppedAppCntrlMsgs),
-	       &(pTarang->stDroppedAppCntrlMsgs),sizeof(S_MIBS_DROPPED_APP_CNTRL_MESSAGES));
+	       &(pTarang->stDroppedAppCntrlMsgs),
+	       sizeof(S_MIBS_DROPPED_APP_CNTRL_MESSAGES));
 }
 
-
-VOID CopyMIBSExtendedSFParameters(PMINI_ADAPTER Adapter,
-		CServiceFlowParamSI *psfLocalSet, UINT uiSearchRuleIndex)
+VOID CopyMIBSExtendedSFParameters(PMINI_ADAPTER Adapter, CServiceFlowParamSI *psfLocalSet, UINT uiSearchRuleIndex)
 {
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfSfid = psfLocalSet->u32SFID;
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsMaxSustainedRate = psfLocalSet->u32MaxSustainedTrafficRate;
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsMaxTrafficBurst = psfLocalSet->u32MaxTrafficBurst;
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsMinReservedRate = psfLocalSet->u32MinReservedTrafficRate;
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsToleratedJitter = psfLocalSet->u32ToleratedJitter;
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsMaxLatency = psfLocalSet->u32MaximumLatency;
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsFixedVsVariableSduInd = psfLocalSet->u8FixedLengthVSVariableLengthSDUIndicator;
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsFixedVsVariableSduInd = ntohl(Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsFixedVsVariableSduInd);
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsSduSize = psfLocalSet->u8SDUSize;
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsSduSize = ntohl(Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsSduSize);
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsSfSchedulingType = psfLocalSet->u8ServiceFlowSchedulingType;
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsSfSchedulingType = ntohl(Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsSfSchedulingType);
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqEnable = psfLocalSet->u8ARQEnable;
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqEnable = ntohl(Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqEnable);
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqWindowSize = ntohs(psfLocalSet->u16ARQWindowSize);
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqWindowSize = ntohl(Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqWindowSize);
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqBlockLifetime = ntohs(psfLocalSet->u16ARQBlockLifeTime);
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqBlockLifetime = ntohl(Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqBlockLifetime);
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqSyncLossTimeout = ntohs(psfLocalSet->u16ARQSyncLossTimeOut);
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqSyncLossTimeout = ntohl(Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqSyncLossTimeout);
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqDeliverInOrder = psfLocalSet->u8ARQDeliverInOrder;
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqDeliverInOrder = ntohl(Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqDeliverInOrder);
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqRxPurgeTimeout = ntohs(psfLocalSet->u16ARQRxPurgeTimeOut);
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqRxPurgeTimeout = ntohl(Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqRxPurgeTimeout);
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqBlockSize = ntohs(psfLocalSet->u16ARQBlockSize);
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqBlockSize = ntohl(Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsArqBlockSize);
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsReqTxPolicy = psfLocalSet->u8RequesttransmissionPolicy;
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsReqTxPolicy = ntohl(Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsReqTxPolicy);
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnSfCsSpecification = psfLocalSet->u8CSSpecification;
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnSfCsSpecification = ntohl(Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnSfCsSpecification);
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsTargetSaid = ntohs(psfLocalSet->u16TargetSAID);
-	Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsTargetSaid = ntohl(Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable.wmanIfCmnCpsTargetSaid);
+	S_MIBS_EXTSERVICEFLOW_PARAMETERS *t = &Adapter->PackInfo[uiSearchRuleIndex].stMibsExtServiceFlowTable;
+
+	t->wmanIfSfid = psfLocalSet->u32SFID;
+	t->wmanIfCmnCpsMaxSustainedRate = psfLocalSet->u32MaxSustainedTrafficRate;
+	t->wmanIfCmnCpsMaxTrafficBurst = psfLocalSet->u32MaxTrafficBurst;
+	t->wmanIfCmnCpsMinReservedRate = psfLocalSet->u32MinReservedTrafficRate;
+	t->wmanIfCmnCpsToleratedJitter = psfLocalSet->u32ToleratedJitter;
+	t->wmanIfCmnCpsMaxLatency = psfLocalSet->u32MaximumLatency;
+	t->wmanIfCmnCpsFixedVsVariableSduInd = psfLocalSet->u8FixedLengthVSVariableLengthSDUIndicator;
+	t->wmanIfCmnCpsFixedVsVariableSduInd = ntohl(t->wmanIfCmnCpsFixedVsVariableSduInd);
+	t->wmanIfCmnCpsSduSize = psfLocalSet->u8SDUSize;
+	t->wmanIfCmnCpsSduSize = ntohl(t->wmanIfCmnCpsSduSize);
+	t->wmanIfCmnCpsSfSchedulingType = psfLocalSet->u8ServiceFlowSchedulingType;
+	t->wmanIfCmnCpsSfSchedulingType = ntohl(t->wmanIfCmnCpsSfSchedulingType);
+	t->wmanIfCmnCpsArqEnable = psfLocalSet->u8ARQEnable;
+	t->wmanIfCmnCpsArqEnable = ntohl(t->wmanIfCmnCpsArqEnable);
+	t->wmanIfCmnCpsArqWindowSize = ntohs(psfLocalSet->u16ARQWindowSize);
+	t->wmanIfCmnCpsArqWindowSize = ntohl(t->wmanIfCmnCpsArqWindowSize);
+	t->wmanIfCmnCpsArqBlockLifetime = ntohs(psfLocalSet->u16ARQBlockLifeTime);
+	t->wmanIfCmnCpsArqBlockLifetime = ntohl(t->wmanIfCmnCpsArqBlockLifetime);
+	t->wmanIfCmnCpsArqSyncLossTimeout = ntohs(psfLocalSet->u16ARQSyncLossTimeOut);
+	t->wmanIfCmnCpsArqSyncLossTimeout = ntohl(t->wmanIfCmnCpsArqSyncLossTimeout);
+	t->wmanIfCmnCpsArqDeliverInOrder = psfLocalSet->u8ARQDeliverInOrder;
+	t->wmanIfCmnCpsArqDeliverInOrder = ntohl(t->wmanIfCmnCpsArqDeliverInOrder);
+	t->wmanIfCmnCpsArqRxPurgeTimeout = ntohs(psfLocalSet->u16ARQRxPurgeTimeOut);
+	t->wmanIfCmnCpsArqRxPurgeTimeout = ntohl(t->wmanIfCmnCpsArqRxPurgeTimeout);
+	t->wmanIfCmnCpsArqBlockSize = ntohs(psfLocalSet->u16ARQBlockSize);
+	t->wmanIfCmnCpsArqBlockSize = ntohl(t->wmanIfCmnCpsArqBlockSize);
+	t->wmanIfCmnCpsReqTxPolicy = psfLocalSet->u8RequesttransmissionPolicy;
+	t->wmanIfCmnCpsReqTxPolicy = ntohl(t->wmanIfCmnCpsReqTxPolicy);
+	t->wmanIfCmnSfCsSpecification = psfLocalSet->u8CSSpecification;
+	t->wmanIfCmnSfCsSpecification = ntohl(t->wmanIfCmnSfCsSpecification);
+	t->wmanIfCmnCpsTargetSaid = ntohs(psfLocalSet->u16TargetSAID);
+	t->wmanIfCmnCpsTargetSaid = ntohl(t->wmanIfCmnCpsTargetSaid);
 
 }

drivers/staging/bcm/nvm.c

@@ -78,7 +78,7 @@ static UCHAR ReadEEPROMStatusRegister( PMINI_ADAPTER Adapter )
 	{
 		value=0;
 		uiStatus = 0 ;
-		rdmalt( Adapter, EEPROM_SPI_Q_STATUS1_REG,&uiStatus, sizeof(uiStatus));
+		rdmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &uiStatus, sizeof(uiStatus));
 		if(Adapter->device_removed == TRUE)
 		{
 			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Modem has got removed hence exiting....");
@@ -93,7 +93,7 @@ static UCHAR ReadEEPROMStatusRegister( PMINI_ADAPTER Adapter )
 			wrmalt( Adapter, EEPROM_SPI_Q_STATUS1_REG, &value, sizeof(value));
 
 			value =0;
-			rdmalt(Adapter, EEPROM_READ_DATAQ_REG,&value, sizeof(value));
+			rdmalt(Adapter, EEPROM_READ_DATAQ_REG, &value, sizeof(value));
 			uiData = (UCHAR)value;
 
 			break;
@@ -102,8 +102,8 @@ static UCHAR ReadEEPROMStatusRegister( PMINI_ADAPTER Adapter )
 		dwRetries-- ;
 		if ( dwRetries == 0 )
 		{
-			 rdmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG,&value, sizeof(value));
-			 rdmalt(Adapter, EEPROM_SPI_Q_STATUS_REG,&value1, sizeof(value1));
+			 rdmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &value, sizeof(value));
+			 rdmalt(Adapter, EEPROM_SPI_Q_STATUS_REG, &value1, sizeof(value1));
 			 BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"0x3004 = %x 0x3008 = %x, retries = %d failed.\n",value,value1,  MAX_EEPROM_RETRIES*RETRIES_PER_DELAY);
 			return uiData;
 		}
@@ -158,7 +158,7 @@ INT ReadBeceemEEPROMBulk( PMINI_ADAPTER Adapter,
 		{
 
 		uiStatus = 0;
-		rdmalt( Adapter, EEPROM_SPI_Q_STATUS1_REG, &uiStatus, sizeof(uiStatus));
+		rdmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &uiStatus, sizeof(uiStatus));
 		if(Adapter->device_removed == TRUE)
 		{
 			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Modem has got Removed.hence exiting from loop...");
@@ -202,8 +202,8 @@ INT ReadBeceemEEPROMBulk( PMINI_ADAPTER Adapter,
 		{
 			value=0;
 			value1=0;
-			rdmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG,&value, sizeof(value));
-			rdmalt(Adapter, EEPROM_SPI_Q_STATUS_REG,&value1, sizeof(value1));
+			rdmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &value, sizeof(value));
+			rdmalt(Adapter, EEPROM_SPI_Q_STATUS_REG, &value1, sizeof(value1));
 			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "dwNumWords %d 0x3004 = %x 0x3008 = %x  retries = %d failed.\n", dwNumWords, value,  value1,  MAX_EEPROM_RETRIES*RETRIES_PER_DELAY);
 			return STATUS_FAILURE;
 		}
@@ -217,22 +217,22 @@ INT ReadBeceemEEPROMBulk( PMINI_ADAPTER Adapter,
 		pvalue = (PUCHAR)(pdwData + dwIndex);
 
 		value =0;
-		rdmalt(Adapter, EEPROM_READ_DATAQ_REG,&value, sizeof(value));
+		rdmalt(Adapter, EEPROM_READ_DATAQ_REG, &value, sizeof(value));
 
 		pvalue[0] = value;
 
 		value = 0;
-		rdmalt(Adapter, EEPROM_READ_DATAQ_REG,&value, sizeof(value));
+		rdmalt(Adapter, EEPROM_READ_DATAQ_REG, &value, sizeof(value));
 
 		pvalue[1] = value;
 
 		value =0;
-		rdmalt(Adapter, EEPROM_READ_DATAQ_REG,&value, sizeof(value));
+		rdmalt(Adapter, EEPROM_READ_DATAQ_REG, &value, sizeof(value));
 
 		pvalue[2] = value;
 
 		value = 0;
-		rdmalt(Adapter, EEPROM_READ_DATAQ_REG,&value, sizeof(value));
+		rdmalt(Adapter, EEPROM_READ_DATAQ_REG, &value, sizeof(value));
 
 		pvalue[3] = value;
 	}
@@ -445,6 +445,7 @@ static INT BeceemFlashBulkRead(
 	UINT uiBytesToRead = uiNumBytes;
 	INT Status = 0;
 	UINT uiPartOffset = 0;
+	int bytes;
 
 	if(Adapter->device_removed )
 	{
@@ -469,9 +470,9 @@ static INT BeceemFlashBulkRead(
 		uiBytesToRead = MAX_RW_SIZE - (uiOffset%MAX_RW_SIZE);
 		uiBytesToRead = MIN(uiNumBytes,uiBytesToRead);
 
-		if(rdm(Adapter,uiPartOffset, (PCHAR)pBuffer+uiIndex,uiBytesToRead))
-		{
-			Status = -1;
+		bytes = rdm(Adapter, uiPartOffset, (PCHAR)pBuffer+uiIndex, uiBytesToRead);
+		if (bytes < 0) {
+			Status = bytes;
 			Adapter->SelectedChip = RESET_CHIP_SELECT;
 			return Status;
 		}
@@ -488,9 +489,9 @@ static INT BeceemFlashBulkRead(
 
 		uiBytesToRead = MIN(uiNumBytes,MAX_RW_SIZE);
 
-		if(rdm(Adapter,uiPartOffset, (PCHAR)pBuffer+uiIndex,uiBytesToRead))
-		{
-			Status = -1;
+		bytes = rdm(Adapter, uiPartOffset, (PCHAR)pBuffer+uiIndex, uiBytesToRead);
+		if (bytes < 0) {
+			Status = bytes;
 			break;
 		}
 
@@ -613,6 +614,7 @@ static INT FlashSectorErase(PMINI_ADAPTER Adapter,
 	UINT iIndex = 0, iRetries = 0;
 	UINT uiStatus = 0;
 	UINT value;
+	int bytes;
 
 	for(iIndex=0;iIndex<numOfSectors;iIndex++)
 	{
@@ -632,10 +634,11 @@ static INT FlashSectorErase(PMINI_ADAPTER Adapter,
 				return STATUS_FAILURE;
 			}
 
-			if(rdmalt(Adapter, FLASH_SPI_READQ_REG, &uiStatus, sizeof(uiStatus)) < 0 )
-			{
-				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Reading status of FLASH_SPI_READQ_REG fails");
-				return STATUS_FAILURE;
+			bytes = rdmalt(Adapter, FLASH_SPI_READQ_REG, &uiStatus, sizeof(uiStatus));
+			if (bytes < 0) {
+				uiStatus = bytes;
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Reading status of FLASH_SPI_READQ_REG fails");
+				return uiStatus;
 			}
 			iRetries++;
 			//After every try lets make the CPU free for 10 ms. generally time taken by the
@@ -679,6 +682,7 @@ static INT flashByteWrite(
 
 	UINT value;
 	ULONG ulData = *(PUCHAR)pData;
+	int bytes;
 
 //
 // need not write 0xFF because write requires an erase and erase will
@@ -720,10 +724,11 @@ static INT flashByteWrite(
 			return STATUS_FAILURE;
 	  	}
 	  	//__udelay(1);
-	  	if(rdmalt(Adapter, FLASH_SPI_READQ_REG, &uiStatus, sizeof(uiStatus)) < 0)
-	  	{
-	  		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Reading status of FLASH_SPI_READQ_REG fails");
-			return STATUS_FAILURE;
+		bytes = rdmalt(Adapter, FLASH_SPI_READQ_REG, &uiStatus, sizeof(uiStatus));
+		if (bytes < 0) {
+			uiStatus = bytes;
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Reading status of FLASH_SPI_READQ_REG fails");
+			return uiStatus;
 		}
 	  	iRetries--;
 		if( iRetries && ((iRetries % FLASH_PER_RETRIES_DELAY) == 0))
@@ -771,6 +776,7 @@ static INT flashWrite(
 
 	UINT value;
 	UINT uiErasePattern[4] = {0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF};
+	int bytes;
 //
 // need not write 0xFFFFFFFF because write requires an erase and erase will
 // make whole sector 0xFFFFFFFF.
@@ -803,10 +809,11 @@ static INT flashWrite(
 			return STATUS_FAILURE;
 	  	}
 	  	//__udelay(1);
-	  	if(rdmalt(Adapter, FLASH_SPI_READQ_REG, &uiStatus, sizeof(uiStatus)) < 0 )
-	  	{
-	  		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Reading status of FLASH_SPI_READQ_REG fails");
-			return STATUS_FAILURE;
+		bytes = rdmalt(Adapter, FLASH_SPI_READQ_REG, &uiStatus, sizeof(uiStatus));
+		if (bytes < 0) {
+			uiStatus = bytes;
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Reading status of FLASH_SPI_READQ_REG fails");
+			return uiStatus;
 		}
 
 		iRetries--;
@@ -849,6 +856,7 @@ static INT flashByteWriteStatus(
 	INT  iRetries = MAX_FLASH_RETRIES * FLASH_PER_RETRIES_DELAY; //3
 	ULONG ulData  = *(PUCHAR)pData;
 	UINT value;
+	int bytes;
 
 //
 // need not write 0xFFFFFFFF because write requires an erase and erase will
@@ -891,10 +899,11 @@ static INT flashByteWriteStatus(
 			return STATUS_FAILURE;
 		}
 		//__udelay(1);
-		if(rdmalt(Adapter, FLASH_SPI_READQ_REG, &uiStatus, sizeof(uiStatus)) < 0)
-		{
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Reading status of FLASH_SPI_READQ_REG fails");
-			return STATUS_FAILURE;
+		bytes = rdmalt(Adapter, FLASH_SPI_READQ_REG, &uiStatus, sizeof(uiStatus));
+		if (bytes < 0) {
+			uiStatus = bytes;
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Reading status of FLASH_SPI_READQ_REG fails");
+			return uiStatus;
 		}
 
 		iRetries--;
@@ -935,6 +944,7 @@ static INT flashWriteStatus(
 	//UINT uiReadBack = 0;
 	UINT value;
 	UINT uiErasePattern[4] = {0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF};
+	int bytes;
 
 //
 // need not write 0xFFFFFFFF because write requires an erase and erase will
@@ -967,10 +977,11 @@ static INT flashWriteStatus(
 			return STATUS_FAILURE;
 	  	}
 	  	//__udelay(1);
-	  	if(rdmalt(Adapter, FLASH_SPI_READQ_REG, &uiStatus, sizeof(uiStatus)) < 0)
-	  	{
-	  		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Reading status of FLASH_SPI_READQ_REG fails");
-			return STATUS_FAILURE;
+		bytes = rdmalt(Adapter, FLASH_SPI_READQ_REG, &uiStatus, sizeof(uiStatus));
+		if (bytes < 0) {
+			uiStatus = bytes;
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Reading status of FLASH_SPI_READQ_REG fails");
+			return uiStatus;
 		}
 	  	iRetries--;
 		//this will ensure that in there will be no changes in the current path.
@@ -1841,7 +1852,7 @@ static INT BeceemEEPROMWritePage( PMINI_ADAPTER Adapter, UINT uiData[], UINT uiO
 	 * What we are checking if the previous write has completed, and this
 	 * may take time. We should wait till the Empty bit is set. */
 	uiStatus = 0;
-	rdmalt( Adapter, EEPROM_SPI_Q_STATUS1_REG,&uiStatus, sizeof(uiStatus)) ;
+	rdmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &uiStatus, sizeof(uiStatus));
 	while ( ( uiStatus & EEPROM_WRITE_QUEUE_EMPTY ) == 0 )
 	{
 		uiRetries--;
@@ -1855,7 +1866,7 @@ static INT BeceemEEPROMWritePage( PMINI_ADAPTER Adapter, UINT uiData[], UINT uiO
 					msleep(1);
 
 		uiStatus = 0;
-		rdmalt( Adapter, EEPROM_SPI_Q_STATUS1_REG,&uiStatus, sizeof(uiStatus)) ;
+		rdmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &uiStatus, sizeof(uiStatus));
 		if(Adapter->device_removed == TRUE)
 		{
 			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Modem got removed hence exiting from loop....");
@@ -2500,7 +2511,7 @@ static ULONG BcmReadFlashRDID(PMINI_ADAPTER Adapter)
 // Read SPI READQ REG. The output will be WWXXYYZZ.
 // The ID is 3Bytes long and is WWXXYY. ZZ needs to be Ignored.
 //
-	rdmalt(Adapter, FLASH_SPI_READQ_REG,(PUINT)&ulRDID, sizeof(ulRDID));
+	rdmalt(Adapter, FLASH_SPI_READQ_REG, (PUINT)&ulRDID, sizeof(ulRDID));
 
 	return (ulRDID >>8);
 
@@ -4735,8 +4746,8 @@ static INT BcmDoChipSelect(PMINI_ADAPTER Adapter, UINT offset)
 	Adapter->SelectedChip = ChipNum ;
 
 	//bit[13..12]  will select the appropriate chip
-	rdmalt(Adapter,FLASH_CONFIG_REG, &FlashConfig, 4);
-	rdmalt(Adapter,FLASH_GPIO_CONFIG_REG, &GPIOConfig, 4);
+	rdmalt(Adapter, FLASH_CONFIG_REG, &FlashConfig, 4);
+	rdmalt(Adapter, FLASH_GPIO_CONFIG_REG, &GPIOConfig, 4);
 
 	{
 		switch(ChipNum)

drivers/staging/comedi/comedi_fops.c

@@ -2479,18 +2479,18 @@ static ssize_t store_max_read_buffer_kb(struct device *dev,
 					const char *buf, size_t count)
 {
 	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned long new_max_size_kb;
-	uint64_t new_max_size;
+	unsigned int new_max_size_kb;
+	unsigned int new_max_size;
+	int ret;
 	struct comedi_subdevice *const read_subdevice =
 	    comedi_get_read_subdevice(info);
 
-	if (strict_strtoul(buf, 10, &new_max_size_kb))
-		return -EINVAL;
-	if (new_max_size_kb != (uint32_t) new_max_size_kb)
-		return -EINVAL;
-	new_max_size = ((uint64_t) new_max_size_kb) * bytes_per_kibi;
-	if (new_max_size != (uint32_t) new_max_size)
+	ret = kstrtouint(buf, 10, &new_max_size_kb);
+	if (ret)
+		return ret;
+	if (new_max_size_kb > (UINT_MAX / bytes_per_kibi))
 		return -EINVAL;
+	new_max_size = new_max_size_kb * bytes_per_kibi;
 
 	mutex_lock(&info->device->mutex);
 	if (read_subdevice == NULL ||
@@ -2540,19 +2540,19 @@ static ssize_t store_read_buffer_kb(struct device *dev,
 				    const char *buf, size_t count)
 {
 	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned long new_size_kb;
-	uint64_t new_size;
+	unsigned int new_size_kb;
+	unsigned int new_size;
 	int retval;
+	int ret;
 	struct comedi_subdevice *const read_subdevice =
 	    comedi_get_read_subdevice(info);
 
-	if (strict_strtoul(buf, 10, &new_size_kb))
-		return -EINVAL;
-	if (new_size_kb != (uint32_t) new_size_kb)
-		return -EINVAL;
-	new_size = ((uint64_t) new_size_kb) * bytes_per_kibi;
-	if (new_size != (uint32_t) new_size)
+	ret = kstrtouint(buf, 10, &new_size_kb);
+	if (ret)
+		return ret;
+	if (new_size_kb > (UINT_MAX / bytes_per_kibi))
 		return -EINVAL;
+	new_size = new_size_kb * bytes_per_kibi;
 
 	mutex_lock(&info->device->mutex);
 	if (read_subdevice == NULL ||
@@ -2606,18 +2606,18 @@ static ssize_t store_max_write_buffer_kb(struct device *dev,
 					 const char *buf, size_t count)
 {
 	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned long new_max_size_kb;
-	uint64_t new_max_size;
+	unsigned int new_max_size_kb;
+	unsigned int new_max_size;
+	int ret;
 	struct comedi_subdevice *const write_subdevice =
 	    comedi_get_write_subdevice(info);
 
-	if (strict_strtoul(buf, 10, &new_max_size_kb))
-		return -EINVAL;
-	if (new_max_size_kb != (uint32_t) new_max_size_kb)
-		return -EINVAL;
-	new_max_size = ((uint64_t) new_max_size_kb) * bytes_per_kibi;
-	if (new_max_size != (uint32_t) new_max_size)
+	ret = kstrtouint(buf, 10, &new_max_size_kb);
+	if (ret)
+		return ret;
+	if (new_max_size_kb > (UINT_MAX / bytes_per_kibi))
 		return -EINVAL;
+	new_max_size = new_max_size_kb * bytes_per_kibi;
 
 	mutex_lock(&info->device->mutex);
 	if (write_subdevice == NULL ||
@@ -2667,19 +2667,19 @@ static ssize_t store_write_buffer_kb(struct device *dev,
 				     const char *buf, size_t count)
 {
 	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned long new_size_kb;
-	uint64_t new_size;
+	unsigned int new_size_kb;
+	unsigned int new_size;
 	int retval;
+	int ret;
 	struct comedi_subdevice *const write_subdevice =
 	    comedi_get_write_subdevice(info);
 
-	if (strict_strtoul(buf, 10, &new_size_kb))
-		return -EINVAL;
-	if (new_size_kb != (uint32_t) new_size_kb)
+	ret = kstrtouint(buf, 10, &new_size_kb);
+	if (ret)
+		return ret;
+	if (new_size_kb > (UINT_MAX / bytes_per_kibi))
 		return -EINVAL;
 	new_size = ((uint64_t) new_size_kb) * bytes_per_kibi;
-	if (new_size != (uint32_t) new_size)
-		return -EINVAL;
 
 	mutex_lock(&info->device->mutex);
 	if (write_subdevice == NULL ||

drivers/staging/comedi/drivers/addi-data/addi_common.c

@@ -145,78 +145,77 @@ void fpu_end(void)
 
 static DEFINE_PCI_DEVICE_TABLE(addi_apci_tbl) = {
 #ifdef CONFIG_APCI_3120
-	{APCI3120_BOARD_VENDOR_ID, 0x818D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_DEVICE(APCI3120_BOARD_VENDOR_ID, 0x818D)},
 #endif
 #ifdef CONFIG_APCI_1032
-	{APCI1032_BOARD_VENDOR_ID, 0x1003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_DEVICE(APCI1032_BOARD_VENDOR_ID, 0x1003)},
 #endif
 #ifdef CONFIG_APCI_1516
-	{APCI1516_BOARD_VENDOR_ID, 0x1001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_DEVICE(APCI1516_BOARD_VENDOR_ID, 0x1001)},
 #endif
 #ifdef CONFIG_APCI_2016
-	{APCI2016_BOARD_VENDOR_ID, 0x1002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_DEVICE(APCI2016_BOARD_VENDOR_ID, 0x1002)},
 #endif
 #ifdef CONFIG_APCI_2032
-	{APCI2032_BOARD_VENDOR_ID, 0x1004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_DEVICE(APCI2032_BOARD_VENDOR_ID, 0x1004)},
 #endif
 #ifdef CONFIG_APCI_2200
-	{APCI2200_BOARD_VENDOR_ID, 0x1005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_DEVICE(APCI2200_BOARD_VENDOR_ID, 0x1005)},
 #endif
 #ifdef CONFIG_APCI_1564
-	{APCI1564_BOARD_VENDOR_ID, 0x1006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_DEVICE(APCI1564_BOARD_VENDOR_ID, 0x1006)},
 #endif
 #ifdef CONFIG_APCI_1500
-	{APCI1500_BOARD_VENDOR_ID, 0x80fc, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_DEVICE(APCI1500_BOARD_VENDOR_ID, 0x80fc)},
 #endif
 #ifdef CONFIG_APCI_3001
-	{APCI3120_BOARD_VENDOR_ID, 0x828D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_DEVICE(APCI3120_BOARD_VENDOR_ID, 0x828D)},
 #endif
 #ifdef CONFIG_APCI_3501
-	{APCI3501_BOARD_VENDOR_ID, 0x3001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_DEVICE(APCI3501_BOARD_VENDOR_ID, 0x3001)},
 #endif
 #ifdef CONFIG_APCI_035
-	{APCI035_BOARD_VENDOR_ID, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_DEVICE(APCI035_BOARD_VENDOR_ID,  0x0300)},
 #endif
 #ifdef CONFIG_APCI_3200
-	{APCI3200_BOARD_VENDOR_ID, 0x3000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_DEVICE(APCI3200_BOARD_VENDOR_ID, 0x3000)},
 #endif
 #ifdef CONFIG_APCI_3300
-	{APCI3200_BOARD_VENDOR_ID, 0x3007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_DEVICE(APCI3200_BOARD_VENDOR_ID, 0x3007)},
 #endif
 #ifdef CONFIG_APCI_1710
-	{APCI1710_BOARD_VENDOR_ID, APCI1710_BOARD_DEVICE_ID,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_DEVICE(APCI1710_BOARD_VENDOR_ID, APCI1710_BOARD_DEVICE_ID)},
 #endif
 #ifdef CONFIG_APCI_16XX
-	{0x15B8, 0x1009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x100A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1009)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x100A)},
 #endif
 #ifdef CONFIG_APCI_3XXX
-	{0x15B8, 0x3010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x300F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x300E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x3013, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x3014, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x3015, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x3016, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x3017, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x3018, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x3019, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x301A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x301B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x301C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x301D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x301E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x301F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x3020, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x3021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x3022, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x3023, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x300B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x3002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x3003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x3004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0x15B8, 0x3024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3010)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x300F)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x300E)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3013)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3014)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3015)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3016)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3017)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3018)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3019)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x301A)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x301B)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x301C)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x301D)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x301E)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x301F)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3020)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3021)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3022)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3023)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x300B)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3002)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3003)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3004)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3024)},
 #endif
 	{0}
 };
@@ -1019,7 +1018,7 @@ static const struct addi_board boardtypes[] = {
 #endif
 #ifdef CONFIG_APCI_16XX
 	{"apci1648",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x1009,
 			128,
 			0,
@@ -1075,7 +1074,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI16XX_InsnBitsWriteTTLIO},
 
 	{"apci1696",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x100A,
 			128,
 			0,
@@ -1132,7 +1131,7 @@ static const struct addi_board boardtypes[] = {
 #endif
 #ifdef CONFIG_APCI_3XXX
 	{"apci3000-16",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x3010,
 			256,
 			256,
@@ -1188,7 +1187,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3000-8",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x300F,
 			256,
 			256,
@@ -1244,7 +1243,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3000-4",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x300E,
 			256,
 			256,
@@ -1300,7 +1299,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3006-16",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x3013,
 			256,
 			256,
@@ -1356,7 +1355,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3006-8",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x3014,
 			256,
 			256,
@@ -1412,7 +1411,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3006-4",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x3015,
 			256,
 			256,
@@ -1468,7 +1467,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3010-16",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x3016,
 			256,
 			256,
@@ -1524,7 +1523,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3010-8",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x3017,
 			256,
 			256,
@@ -1580,7 +1579,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3010-4",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x3018,
 			256,
 			256,
@@ -1636,7 +1635,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3016-16",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x3019,
 			256,
 			256,
@@ -1692,7 +1691,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3016-8",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x301A,
 			256,
 			256,
@@ -1748,7 +1747,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3016-4",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x301B,
 			256,
 			256,
@@ -1804,7 +1803,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3100-16-4",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x301C,
 			256,
 			256,
@@ -1860,7 +1859,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3100-8-4",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x301D,
 			256,
 			256,
@@ -1916,7 +1915,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3106-16-4",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x301E,
 			256,
 			256,
@@ -1972,7 +1971,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3106-8-4",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x301F,
 			256,
 			256,
@@ -2028,7 +2027,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3110-16-4",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x3020,
 			256,
 			256,
@@ -2084,7 +2083,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3110-8-4",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x3021,
 			256,
 			256,
@@ -2140,7 +2139,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3116-16-4",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x3022,
 			256,
 			256,
@@ -2196,7 +2195,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3116-8-4",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x3023,
 			256,
 			256,
@@ -2252,7 +2251,7 @@ static const struct addi_board boardtypes[] = {
 		i_APCI3XXX_InsnWriteTTLIO},
 
 	{"apci3003",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x300B,
 			256,
 			256,
@@ -2307,7 +2306,7 @@ static const struct addi_board boardtypes[] = {
 		NULL},
 
 	{"apci3002-16",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x3002,
 			256,
 			256,
@@ -2362,7 +2361,7 @@ static const struct addi_board boardtypes[] = {
 		NULL},
 
 	{"apci3002-8",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x3003,
 			256,
 			256,
@@ -2417,7 +2416,7 @@ static const struct addi_board boardtypes[] = {
 		NULL},
 
 	{"apci3002-4",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x3004,
 			256,
 			256,
@@ -2472,7 +2471,7 @@ static const struct addi_board boardtypes[] = {
 		NULL},
 
 	{"apci3500",
-			0x15B8,
+			PCI_VENDOR_ID_ADDIDATA,
 			0x3024,
 			256,
 			256,

drivers/staging/comedi/drivers/adl_pci7230.c

@@ -44,15 +44,7 @@ Configuration Options:
 #define PCI_DEVICE_ID_PCI7230 0x7230
 
 static DEFINE_PCI_DEVICE_TABLE(adl_pci7230_pci_table) = {
-	{
-		PCI_VENDOR_ID_ADLINK,
-		PCI_DEVICE_ID_PCI7230,
-		PCI_ANY_ID,
-		PCI_ANY_ID,
-		0,
-		0,
-		0
-	},
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7230) },
 	{0}
 };
 

drivers/staging/comedi/drivers/adl_pci7296.c

@@ -49,10 +49,8 @@ Configuration Options:
 #define PCI_DEVICE_ID_PCI7296 0x7296
 
 static DEFINE_PCI_DEVICE_TABLE(adl_pci7296_pci_table) = {
-	{
-	PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7296, PCI_ANY_ID,
-		    PCI_ANY_ID, 0, 0, 0}, {
-	0}
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7296) },
+	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, adl_pci7296_pci_table);

drivers/staging/comedi/drivers/adl_pci7432.c

@@ -44,10 +44,8 @@ Configuration Options:
 #define PCI_DEVICE_ID_PCI7432 0x7432
 
 static DEFINE_PCI_DEVICE_TABLE(adl_pci7432_pci_table) = {
-	{
-	PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7432, PCI_ANY_ID,
-		    PCI_ANY_ID, 0, 0, 0}, {
-	0}
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7432) },
+	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, adl_pci7432_pci_table);

drivers/staging/comedi/drivers/adl_pci8164.c

@@ -57,10 +57,8 @@ Configuration Options:
 #define PCI_DEVICE_ID_PCI8164 0x8164
 
 static DEFINE_PCI_DEVICE_TABLE(adl_pci8164_pci_table) = {
-	{
-	PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI8164, PCI_ANY_ID,
-		    PCI_ANY_ID, 0, 0, 0}, {
-	0}
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI8164) },
+	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, adl_pci8164_pci_table);

drivers/staging/comedi/drivers/adl_pci9111.c

@@ -311,10 +311,8 @@ static const struct comedi_lrange pci9111_hr_ai_range = {
 };
 
 static DEFINE_PCI_DEVICE_TABLE(pci9111_pci_table) = {
-	{ PCI_VENDOR_ID_ADLINK, PCI9111_HR_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,
-	  0, 0, 0 },
-	/* { PCI_VENDOR_ID_ADLINK, PCI9111_HG_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,
-	 *   0, 0, 0 }, */
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HR_DEVICE_ID) },
+	/* { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HG_DEVICE_ID) }, */
 	{ 0 }
 };
 

drivers/staging/comedi/drivers/adv_pci1710.c

@@ -1382,16 +1382,14 @@ static int pci1710_attach(struct comedi_device *dev,
 	int i;
 	int board_index;
 
-	printk("comedi%d: adv_pci1710: ", dev->minor);
+	dev_info(dev->hw_dev, "comedi%d: adv_pci1710:\n", dev->minor);
 
 	opt_bus = it->options[0];
 	opt_slot = it->options[1];
 
 	ret = alloc_private(dev, sizeof(struct pci1710_private));
-	if (ret < 0) {
-		printk(" - Allocation failed!\n");
+	if (ret < 0)
 		return -ENOMEM;
-	}
 
 	/* Look for matching PCI device */
 	errstr = "not found!";
@@ -1436,10 +1434,10 @@ static int pci1710_attach(struct comedi_device *dev,
 
 	if (!pcidev) {
 		if (opt_bus || opt_slot) {
-			printk(" - Card at b:s %d:%d %s\n",
-			       opt_bus, opt_slot, errstr);
+			dev_err(dev->hw_dev, "- Card at b:s %d:%d %s\n",
+				opt_bus, opt_slot, errstr);
 		} else {
-			printk(" - Card %s\n", errstr);
+			dev_err(dev->hw_dev, "- Card %s\n", errstr);
 		}
 		return -EIO;
 	}
@@ -1450,8 +1448,8 @@ static int pci1710_attach(struct comedi_device *dev,
 	irq = pcidev->irq;
 	iobase = pci_resource_start(pcidev, 2);
 
-	printk(", b:s:f=%d:%d:%d, io=0x%4lx", pci_bus, pci_slot, pci_func,
-	       iobase);
+	dev_dbg(dev->hw_dev, "b:s:f=%d:%d:%d, io=0x%4lx\n", pci_bus, pci_slot,
+		pci_func, iobase);
 
 	dev->iobase = iobase;
 
@@ -1471,10 +1469,8 @@ static int pci1710_attach(struct comedi_device *dev,
 		n_subdevices++;
 
 	ret = alloc_subdevices(dev, n_subdevices);
-	if (ret < 0) {
-		printk(" - Allocation failed!\n");
+	if (ret < 0)
 		return ret;
-	}
 
 	pci1710_reset(dev);
 
@@ -1483,24 +1479,20 @@ static int pci1710_attach(struct comedi_device *dev,
 			if (request_irq(irq, interrupt_service_pci1710,
 					IRQF_SHARED, "Advantech PCI-1710",
 					dev)) {
-				printk
-				    (", unable to allocate IRQ %d, DISABLING IT",
-				     irq);
+				dev_dbg(dev->hw_dev, "unable to allocate IRQ %d, DISABLING IT",
+					irq);
 				irq = 0;	/* Can't use IRQ */
 			} else {
-				printk(", irq=%u", irq);
+				dev_dbg(dev->hw_dev, "irq=%u", irq);
 			}
 		} else {
-			printk(", IRQ disabled");
+			dev_dbg(dev->hw_dev, "IRQ disabled");
 		}
 	} else {
 		irq = 0;
 	}
 
 	dev->irq = irq;
-
-	printk(".\n");
-
 	subdev = 0;
 
 	if (this_board->n_aichan) {

drivers/staging/comedi/drivers/adv_pci_dio.c

@@ -1106,13 +1106,10 @@ static int pci_dio_attach(struct comedi_device *dev,
 	unsigned long iobase;
 	struct pci_dev *pcidev = NULL;
 
-	printk("comedi%d: adv_pci_dio: ", dev->minor);
 
 	ret = alloc_private(dev, sizeof(struct pci_dio_private));
-	if (ret < 0) {
-		printk(", Error: Cann't allocate private memory!\n");
+	if (ret < 0)
 		return -ENOMEM;
-	}
 
 	for_each_pci_dev(pcidev) {
 		/*  loop through cards supported by this driver */
@@ -1140,19 +1137,18 @@ static int pci_dio_attach(struct comedi_device *dev,
 	}
 
 	if (!dev->board_ptr) {
-		printk(", Error: Requested type of the card was not found!\n");
+		dev_err(dev->hw_dev, "Error: Requested type of the card was not found!\n");
 		return -EIO;
 	}
 
 	if (comedi_pci_enable(pcidev, driver_pci_dio.driver_name)) {
-		printk
-		    (", Error: Can't enable PCI device and request regions!\n");
+		dev_err(dev->hw_dev, "Error: Can't enable PCI device and request regions!\n");
 		return -EIO;
 	}
 	iobase = pci_resource_start(pcidev, this_board->main_pci_region);
-	printk(", b:s:f=%d:%d:%d, io=0x%4lx",
-	       pcidev->bus->number, PCI_SLOT(pcidev->devfn),
-	       PCI_FUNC(pcidev->devfn), iobase);
+	dev_dbg(dev->hw_dev, "b:s:f=%d:%d:%d, io=0x%4lx\n",
+		pcidev->bus->number, PCI_SLOT(pcidev->devfn),
+		PCI_FUNC(pcidev->devfn), iobase);
 
 	dev->iobase = iobase;
 	dev->board_name = this_board->name;
@@ -1177,15 +1173,10 @@ static int pci_dio_attach(struct comedi_device *dev,
 	}
 
 	ret = alloc_subdevices(dev, n_subdevices);
-	if (ret < 0) {
-		printk(", Error: Cann't allocate subdevice memory!\n");
+	if (ret < 0)
 		return ret;
-	}
-
-	printk(".\n");
 
 	subdev = 0;
-
 	for (i = 0; i < MAX_DI_SUBDEVS; i++)
 		if (this_board->sdi[i].chans) {
 			s = dev->subdevices + subdev;

drivers/staging/comedi/drivers/amplc_dio200.c

@@ -421,12 +421,9 @@ static const struct dio200_layout_struct dio200_layouts[] = {
 
 #ifdef CONFIG_COMEDI_PCI
 static DEFINE_PCI_DEVICE_TABLE(dio200_pci_table) = {
-	{
-	PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI215,
-		    PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
-	PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI272,
-		    PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
-	0}
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI215) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI272) },
+	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, dio200_pci_table);

drivers/staging/comedi/drivers/amplc_pc236.c

@@ -134,10 +134,8 @@ static const struct pc236_board pc236_boards[] = {
 
 #ifdef CONFIG_COMEDI_PCI
 static DEFINE_PCI_DEVICE_TABLE(pc236_pci_table) = {
-	{
-	PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI236,
-		    PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
-	0}
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI236) },
+	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, pc236_pci_table);

drivers/staging/comedi/drivers/amplc_pc263.c

@@ -101,10 +101,8 @@ static const struct pc263_board pc263_boards[] = {
 
 #ifdef CONFIG_COMEDI_PCI
 static DEFINE_PCI_DEVICE_TABLE(pc263_pci_table) = {
-	{
-	PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI263,
-		    PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
-	0}
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI263) },
+	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, pc263_pci_table);

drivers/staging/comedi/drivers/amplc_pci224.c

@@ -384,12 +384,9 @@ static const struct pci224_board pci224_boards[] = {
  */
 
 static DEFINE_PCI_DEVICE_TABLE(pci224_pci_table) = {
-	{
-	PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI224,
-		    PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
-	PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI234,
-		    PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
-	0}
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI224) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI234) },
+	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, pci224_pci_table);

drivers/staging/comedi/drivers/amplc_pci230.c

@@ -501,12 +501,9 @@ static const struct pci230_board pci230_boards[] = {
 };
 
 static DEFINE_PCI_DEVICE_TABLE(pci230_pci_table) = {
-	{
-	PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_PCI230, PCI_ANY_ID,
-		    PCI_ANY_ID, 0, 0, 0}, {
-	PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_PCI260, PCI_ANY_ID,
-		    PCI_ANY_ID, 0, 0, 0}, {
-	0}
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_PCI230) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_PCI260) },
+	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, pci230_pci_table);

drivers/staging/comedi/drivers/cb_das16_cs.c

@@ -99,7 +99,7 @@ static struct comedi_driver driver_das16cs = {
 	.detach = das16cs_detach,
 };
 
-static struct pcmcia_device *cur_dev = NULL;
+static struct pcmcia_device *cur_dev;
 
 static const struct comedi_lrange das16cs_ai_range = { 4, {
 							   RANGE(-10, 10),
@@ -150,7 +150,7 @@ static const struct das16cs_board *das16cs_probe(struct comedi_device *dev,
 			return das16cs_boards + i;
 	}
 
-	printk("unknown board!\n");
+	dev_dbg(dev->hw_dev, "unknown board!\n");
 
 	return NULL;
 }
@@ -163,20 +163,19 @@ static int das16cs_attach(struct comedi_device *dev,
 	int ret;
 	int i;
 
-	printk("comedi%d: cb_das16_cs: ", dev->minor);
+	dev_dbg(dev->hw_dev, "comedi%d: cb_das16_cs: attached\n", dev->minor);
 
 	link = cur_dev;		/* XXX hack */
 	if (!link)
 		return -EIO;
 
 	dev->iobase = link->resource[0]->start;
-	printk("I/O base=0x%04lx ", dev->iobase);
+	dev_dbg(dev->hw_dev, "I/O base=0x%04lx\n", dev->iobase);
 
-	printk("fingerprint:\n");
+	dev_dbg(dev->hw_dev, "fingerprint:\n");
 	for (i = 0; i < 48; i += 2)
-		printk("%04x ", inw(dev->iobase + i));
+		dev_dbg(dev->hw_dev, "%04x\n", inw(dev->iobase + i));
 
-	printk("\n");
 
 	ret = request_irq(link->irq, das16cs_interrupt,
 			  IRQF_SHARED, "cb_das16_cs", dev);
@@ -185,7 +184,7 @@ static int das16cs_attach(struct comedi_device *dev,
 
 	dev->irq = link->irq;
 
-	printk("irq=%u ", dev->irq);
+	dev_dbg(dev->hw_dev, "irq=%u\n", dev->irq);
 
 	dev->board_ptr = das16cs_probe(dev, link);
 	if (!dev->board_ptr)
@@ -252,14 +251,13 @@ static int das16cs_attach(struct comedi_device *dev,
 		s->type = COMEDI_SUBD_UNUSED;
 	}
 
-	printk("attached\n");
 
 	return 1;
 }
 
 static int das16cs_detach(struct comedi_device *dev)
 {
-	printk("comedi%d: das16cs: remove\n", dev->minor);
+	dev_dbg(dev->hw_dev, "comedi%d: das16cs: remove\n", dev->minor);
 
 	if (dev->irq)
 		free_irq(dev->irq, dev);
@@ -312,7 +310,7 @@ static int das16cs_ai_rinsn(struct comedi_device *dev,
 				break;
 		}
 		if (to == TIMEOUT) {
-			printk("cb_das16_cs: ai timeout\n");
+			dev_dbg(dev->hw_dev, "cb_das16_cs: ai timeout\n");
 			return -ETIME;
 		}
 		data[i] = (unsigned short)inw(dev->iobase + 0);

drivers/staging/comedi/drivers/cb_pcidas.c

@@ -565,8 +565,6 @@ static int cb_pcidas_attach(struct comedi_device *dev,
 	int index;
 	int i;
 
-	printk("comedi%d: cb_pcidas: ", dev->minor);
-
 /*
  * Allocate the private structure area.
  */
@@ -576,7 +574,6 @@ static int cb_pcidas_attach(struct comedi_device *dev,
 /*
  * Probe the device to determine what device in the series it is.
  */
-	printk("\n");
 
 	for_each_pci_dev(pcidev) {
 		/*  is it not a computer boards card? */
@@ -600,20 +597,20 @@ static int cb_pcidas_attach(struct comedi_device *dev,
 		}
 	}
 
-	printk("No supported ComputerBoards/MeasurementComputing card found on "
-	       "requested position\n");
+	dev_err(dev->hw_dev, "No supported ComputerBoards/MeasurementComputing card found on requested position\n");
 	return -EIO;
 
 found:
 
-	printk("Found %s on bus %i, slot %i\n", cb_pcidas_boards[index].name,
-	       pcidev->bus->number, PCI_SLOT(pcidev->devfn));
+	dev_dbg(dev->hw_dev, "Found %s on bus %i, slot %i\n",
+		cb_pcidas_boards[index].name, pcidev->bus->number,
+		PCI_SLOT(pcidev->devfn));
 
 	/*
 	 * Enable PCI device and reserve I/O ports.
 	 */
 	if (comedi_pci_enable(pcidev, "cb_pcidas")) {
-		printk(" Failed to enable PCI device and request regions\n");
+		dev_err(dev->hw_dev, "Failed to enable PCI device and request regions\n");
 		return -EIO;
 	}
 	/*
@@ -639,7 +636,8 @@ static int cb_pcidas_attach(struct comedi_device *dev,
 	/*  get irq */
 	if (request_irq(devpriv->pci_dev->irq, cb_pcidas_interrupt,
 			IRQF_SHARED, "cb_pcidas", dev)) {
-		printk(" unable to allocate irq %d\n", devpriv->pci_dev->irq);
+		dev_dbg(dev->hw_dev, "unable to allocate irq %d\n",
+			devpriv->pci_dev->irq);
 		return -EINVAL;
 	}
 	dev->irq = devpriv->pci_dev->irq;
@@ -768,7 +766,6 @@ static int cb_pcidas_attach(struct comedi_device *dev,
  */
 static int cb_pcidas_detach(struct comedi_device *dev)
 {
-	printk("comedi%d: cb_pcidas: remove\n", dev->minor);
 
 	if (devpriv) {
 		if (devpriv->s5933_config) {

drivers/staging/comedi/drivers/cb_pcidda.c

@@ -282,7 +282,6 @@ static int cb_pcidda_attach(struct comedi_device *dev,
 	struct pci_dev *pcidev = NULL;
 	int index;
 
-	printk("comedi%d: cb_pcidda: ", dev->minor);
 
 /*
  * Allocate the private structure area.
@@ -293,7 +292,6 @@ static int cb_pcidda_attach(struct comedi_device *dev,
 /*
  * Probe the device to determine what device in the series it is.
  */
-	printk("\n");
 
 	for_each_pci_dev(pcidev) {
 		if (pcidev->vendor == PCI_VENDOR_ID_CB) {
@@ -312,22 +310,21 @@ static int cb_pcidda_attach(struct comedi_device *dev,
 		}
 	}
 	if (!pcidev) {
-		printk
-		    ("Not a ComputerBoards/MeasurementComputing card on requested position\n");
+		dev_err(dev->hw_dev, "Not a ComputerBoards/MeasurementComputing card on requested position\n");
 		return -EIO;
 	}
 found:
 	devpriv->pci_dev = pcidev;
 	dev->board_ptr = cb_pcidda_boards + index;
 	/*  "thisboard" macro can be used from here. */
-	printk("Found %s at requested position\n", thisboard->name);
+	dev_dbg(dev->hw_dev, "Found %s at requested position\n",
+		thisboard->name);
 
 	/*
 	 * Enable PCI device and request regions.
 	 */
 	if (comedi_pci_enable(pcidev, thisboard->name)) {
-		printk
-		    ("cb_pcidda: failed to enable PCI device and request regions\n");
+		dev_err(dev->hw_dev, "cb_pcidda: failed to enable PCI device and request regions\n");
 		return -EIO;
 	}
 
@@ -377,12 +374,11 @@ static int cb_pcidda_attach(struct comedi_device *dev,
 	s = dev->subdevices + 2;
 	subdev_8255_init(dev, s, NULL, devpriv->digitalio + PORT2A);
 
-	printk(" eeprom:");
+	dev_dbg(dev->hw_dev, "eeprom:\n");
 	for (index = 0; index < EEPROM_SIZE; index++) {
 		devpriv->eeprom_data[index] = cb_pcidda_read_eeprom(dev, index);
-		printk(" %i:0x%x ", index, devpriv->eeprom_data[index]);
+		dev_dbg(dev->hw_dev, "%i:0x%x\n", index, devpriv->eeprom_data[index]);
 	}
-	printk("\n");
 
 	/*  set calibrations dacs */
 	for (index = 0; index < thisboard->ao_chans; index++)
@@ -417,8 +413,6 @@ static int cb_pcidda_detach(struct comedi_device *dev)
 		subdev_8255_cleanup(dev, dev->subdevices + 2);
 	}
 
-	printk("comedi%d: cb_pcidda: remove\n", dev->minor);
-
 	return 0;
 }
 

drivers/staging/comedi/drivers/cb_pcidio.c

@@ -184,8 +184,6 @@ static int pcidio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	int index;
 	int i;
 
-	printk("comedi%d: cb_pcidio: \n", dev->minor);
-
 /*
  * Allocate the private structure area.  alloc_private() is a
  * convenient macro defined in comedidev.h.
@@ -223,8 +221,7 @@ static int pcidio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		}
 	}
 
-	printk("No supported ComputerBoards/MeasurementComputing card found on "
-	       "requested position\n");
+	dev_err(dev->hw_dev, "No supported ComputerBoards/MeasurementComputing card found on requested position\n");
 	return -EIO;
 
 found:
@@ -236,14 +233,12 @@ static int pcidio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	dev->board_name = thisboard->name;
 
 	devpriv->pci_dev = pcidev;
-	printk("Found %s on bus %i, slot %i\n", thisboard->name,
-	       devpriv->pci_dev->bus->number,
-	       PCI_SLOT(devpriv->pci_dev->devfn));
-	if (comedi_pci_enable(pcidev, thisboard->name)) {
-		printk
-		    ("cb_pcidio: failed to enable PCI device and request regions\n");
+	dev_dbg(dev->hw_dev, "Found %s on bus %i, slot %i\n", thisboard->name,
+		devpriv->pci_dev->bus->number,
+		PCI_SLOT(devpriv->pci_dev->devfn));
+	if (comedi_pci_enable(pcidev, thisboard->name))
 		return -EIO;
-	}
+
 	devpriv->dio_reg_base
 	    =
 	    pci_resource_start(devpriv->pci_dev,
@@ -259,11 +254,10 @@ static int pcidio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	for (i = 0; i < thisboard->n_8255; i++) {
 		subdev_8255_init(dev, dev->subdevices + i,
 				 NULL, devpriv->dio_reg_base + i * 4);
-		printk(" subdev %d: base = 0x%lx\n", i,
-		       devpriv->dio_reg_base + i * 4);
+		dev_dbg(dev->hw_dev, "subdev %d: base = 0x%lx\n", i,
+			devpriv->dio_reg_base + i * 4);
 	}
 
-	printk("attached\n");
 	return 1;
 }
 
@@ -277,7 +271,6 @@ static int pcidio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
  */
 static int pcidio_detach(struct comedi_device *dev)
 {
-	printk("comedi%d: cb_pcidio: remove\n", dev->minor);
 	if (devpriv) {
 		if (devpriv->pci_dev) {
 			if (devpriv->dio_reg_base)

drivers/staging/comedi/drivers/cb_pcimdas.c

@@ -212,8 +212,6 @@ static int cb_pcimdas_attach(struct comedi_device *dev,
 	int index;
 	/* int i; */
 
-	printk("comedi%d: cb_pcimdas: ", dev->minor);
-
 /*
  * Allocate the private structure area.
  */
@@ -223,7 +221,6 @@ static int cb_pcimdas_attach(struct comedi_device *dev,
 /*
  * Probe the device to determine what device in the series it is.
  */
-	printk("\n");
 
 	for_each_pci_dev(pcidev) {
 		/*  is it not a computer boards card? */
@@ -248,26 +245,26 @@ static int cb_pcimdas_attach(struct comedi_device *dev,
 		}
 	}
 
-	printk("No supported ComputerBoards/MeasurementComputing card found on "
-	       "requested position\n");
+	dev_err(dev->hw_dev, "No supported ComputerBoards/MeasurementComputing card found on requested position\n");
 	return -EIO;
 
 found:
 
-	printk("Found %s on bus %i, slot %i\n", cb_pcimdas_boards[index].name,
-	       pcidev->bus->number, PCI_SLOT(pcidev->devfn));
+	dev_dbg(dev->hw_dev, "Found %s on bus %i, slot %i\n",
+		cb_pcimdas_boards[index].name, pcidev->bus->number,
+		PCI_SLOT(pcidev->devfn));
 
 	/*  Warn about non-tested features */
 	switch (thisboard->device_id) {
 	case 0x56:
 		break;
 	default:
-		printk("THIS CARD IS UNSUPPORTED.\n"
-		       "PLEASE REPORT USAGE TO <mocelet@sucs.org>\n");
+		dev_dbg(dev->hw_dev, "THIS CARD IS UNSUPPORTED.\n"
+			"PLEASE REPORT USAGE TO <mocelet@sucs.org>\n");
 	}
 
 	if (comedi_pci_enable(pcidev, "cb_pcimdas")) {
-		printk(" Failed to enable PCI device and request regions\n");
+		dev_err(dev->hw_dev, "Failed to enable PCI device and request regions\n");
 		return -EIO;
 	}
 
@@ -277,13 +274,11 @@ static int cb_pcimdas_attach(struct comedi_device *dev,
 	devpriv->BADR3 = pci_resource_start(devpriv->pci_dev, 3);
 	devpriv->BADR4 = pci_resource_start(devpriv->pci_dev, 4);
 
-#ifdef CBPCIMDAS_DEBUG
-	printk("devpriv->BADR0 = 0x%lx\n", devpriv->BADR0);
-	printk("devpriv->BADR1 = 0x%lx\n", devpriv->BADR1);
-	printk("devpriv->BADR2 = 0x%lx\n", devpriv->BADR2);
-	printk("devpriv->BADR3 = 0x%lx\n", devpriv->BADR3);
-	printk("devpriv->BADR4 = 0x%lx\n", devpriv->BADR4);
-#endif
+	dev_dbg(dev->hw_dev, "devpriv->BADR0 = 0x%lx\n", devpriv->BADR0);
+	dev_dbg(dev->hw_dev, "devpriv->BADR1 = 0x%lx\n", devpriv->BADR1);
+	dev_dbg(dev->hw_dev, "devpriv->BADR2 = 0x%lx\n", devpriv->BADR2);
+	dev_dbg(dev->hw_dev, "devpriv->BADR3 = 0x%lx\n", devpriv->BADR3);
+	dev_dbg(dev->hw_dev, "devpriv->BADR4 = 0x%lx\n", devpriv->BADR4);
 
 /* Dont support IRQ yet */
 /*  get irq */
@@ -333,8 +328,6 @@ static int cb_pcimdas_attach(struct comedi_device *dev,
 	else
 		s->type = COMEDI_SUBD_UNUSED;
 
-	printk("attached\n");
-
 	return 1;
 }
 
@@ -348,16 +341,19 @@ static int cb_pcimdas_attach(struct comedi_device *dev,
  */
 static int cb_pcimdas_detach(struct comedi_device *dev)
 {
-#ifdef CBPCIMDAS_DEBUG
 	if (devpriv) {
-		printk("devpriv->BADR0 = 0x%lx\n", devpriv->BADR0);
-		printk("devpriv->BADR1 = 0x%lx\n", devpriv->BADR1);
-		printk("devpriv->BADR2 = 0x%lx\n", devpriv->BADR2);
-		printk("devpriv->BADR3 = 0x%lx\n", devpriv->BADR3);
-		printk("devpriv->BADR4 = 0x%lx\n", devpriv->BADR4);
+		dev_dbg(dev->hw_dev, "devpriv->BADR0 = 0x%lx\n",
+			devpriv->BADR0);
+		dev_dbg(dev->hw_dev, "devpriv->BADR1 = 0x%lx\n",
+			devpriv->BADR1);
+		dev_dbg(dev->hw_dev, "devpriv->BADR2 = 0x%lx\n",
+			devpriv->BADR2);
+		dev_dbg(dev->hw_dev, "devpriv->BADR3 = 0x%lx\n",
+			devpriv->BADR3);
+		dev_dbg(dev->hw_dev, "devpriv->BADR4 = 0x%lx\n",
+			devpriv->BADR4);
 	}
-#endif
-	printk("comedi%d: cb_pcimdas: remove\n", dev->minor);
+
 	if (dev->irq)
 		free_irq(dev->irq, dev);
 	if (devpriv) {

drivers/staging/comedi/drivers/cb_pcimdda.c

@@ -105,7 +105,8 @@ struct board_struct {
 	int ao_bits;
 	int dio_chans;
 	int dio_method;
-	int dio_offset;		/* how many bytes into the BADR are the DIO ports */
+	/* how many bytes into the BADR are the DIO ports */
+	int dio_offset;
 	int regs_badrindex;	/* IO Region for the control, analog output,
 				   and DIO registers */
 	int reg_sz;		/* number of bytes of registers in io region */
@@ -144,17 +145,18 @@ static const struct board_struct boards[] = {
 /* Please add your PCI vendor ID to comedidev.h, and it will be forwarded
  * upstream. */
 static DEFINE_PCI_DEVICE_TABLE(pci_table) = {
-	{
-	PCI_VENDOR_ID_COMPUTERBOARDS, PCI_ID_PCIM_DDA06_16, PCI_ANY_ID,
-		    PCI_ANY_ID, 0, 0, 0}, {
-	0}
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, PCI_ID_PCIM_DDA06_16) },
+	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, pci_table);
 
-/* this structure is for data unique to this hardware driver.  If
-   several hardware drivers keep similar information in this structure,
-   feel free to suggest moving the variable to the struct comedi_device struct.  */
+/*
+ * this structure is for data unique to this hardware driver.  If
+ * several hardware drivers keep similar information in this structure,
+ * feel free to suggest moving the variable to the struct comedi_device
+ * struct.
+ */
 struct board_private_struct {
 	unsigned long registers;	/* set by probe */
 	unsigned long dio_registers;
@@ -335,7 +337,10 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	if (thisboard->dio_chans) {
 		switch (thisboard->dio_method) {
 		case DIO_8255:
-			/* this is a straight 8255, so register us with the 8255 driver */
+			/*
+			 * this is a straight 8255, so register us with
+			 * the 8255 driver
+			 */
 			subdev_8255_init(dev, s, NULL, devpriv->dio_registers);
 			devpriv->attached_to_8255 = 1;
 			break;
@@ -436,8 +441,11 @@ static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
 
 	for (i = 0; i < insn->n; i++) {
 		inw(devpriv->registers + chan * 2);
-		/* should I set data[i] to the result of the actual read on the register
-		   or the cached unsigned int in devpriv->ao_readback[]? */
+		/*
+		 * should I set data[i] to the result of the actual read
+		 * on the register or the cached unsigned int in
+		 * devpriv->ao_readback[]?
+		 */
 		data[i] = devpriv->ao_readback[chan];
 	}
 

drivers/staging/comedi/drivers/contec_pci_dio.c

@@ -57,10 +57,9 @@ static const struct contec_board contec_boards[] = {
 
 #define PCI_DEVICE_ID_PIO1616L 0x8172
 static DEFINE_PCI_DEVICE_TABLE(contec_pci_table) = {
-	{
-	PCI_VENDOR_ID_CONTEC, PCI_DEVICE_ID_PIO1616L, PCI_ANY_ID,
-		    PCI_ANY_ID, 0, 0, PIO1616L}, {
-	0}
+	{ PCI_DEVICE(PCI_VENDOR_ID_CONTEC, PCI_DEVICE_ID_PIO1616L),
+		.driver_data = PIO1616L },
+	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, contec_pci_table);

drivers/staging/comedi/drivers/daqboard2000.c

@@ -325,9 +325,8 @@ static const struct daq200_boardtype boardtypes[] = {
 #define this_board ((const struct daq200_boardtype *)dev->board_ptr)
 
 static DEFINE_PCI_DEVICE_TABLE(daqboard2000_pci_table) = {
-	{
-	0x1616, 0x0409, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
-	0}
+	{ PCI_DEVICE(0x1616, 0x0409) },
+	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, daqboard2000_pci_table);
@@ -430,16 +429,14 @@ static int daqboard2000_ai_insn_read(struct comedi_device *dev,
 		/* Enable reading from the scanlist FIFO */
 		fpga->acqControl = DAQBOARD2000_SeqStartScanList;
 		for (timeout = 0; timeout < 20; timeout++) {
-			if (fpga->acqControl & DAQBOARD2000_AcqConfigPipeFull) {
+			if (fpga->acqControl & DAQBOARD2000_AcqConfigPipeFull)
 				break;
-			}
 			/* udelay(2); */
 		}
 		fpga->acqControl = DAQBOARD2000_AdcPacerEnable;
 		for (timeout = 0; timeout < 20; timeout++) {
-			if (fpga->acqControl & DAQBOARD2000_AcqLogicScanning) {
+			if (fpga->acqControl & DAQBOARD2000_AcqLogicScanning)
 				break;
-			}
 			/* udelay(2); */
 		}
 		for (timeout = 0; timeout < 20; timeout++) {
@@ -465,9 +462,8 @@ static int daqboard2000_ao_insn_read(struct comedi_device *dev,
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
 
-	for (i = 0; i < insn->n; i++) {
+	for (i = 0; i < insn->n; i++)
 		data[i] = devpriv->ao_readback[chan];
-	}
 
 	return i;
 }
@@ -490,9 +486,8 @@ static int daqboard2000_ao_insn_write(struct comedi_device *dev,
 		/* fpga->dacControl = (chan + 2) * 0x0010 | 0x0001; udelay(1000); */
 		fpga->dacSetting[chan] = data[i];
 		for (timeout = 0; timeout < 20; timeout++) {
-			if ((fpga->dacControl & ((chan + 1) * 0x0010)) == 0) {
+			if ((fpga->dacControl & ((chan + 1) * 0x0010)) == 0)
 				break;
-			}
 			/* udelay(2); */
 		}
 		devpriv->ao_readback[chan] = data[i];
@@ -605,9 +600,8 @@ static int initialize_daqboard2000(struct comedi_device *dev,
 			for (; i < len; i += 2) {
 				int data =
 				    (cpld_array[i] << 8) + cpld_array[i + 1];
-				if (!daqboard2000_writeCPLD(dev, data)) {
+				if (!daqboard2000_writeCPLD(dev, data))
 					break;
-				}
 			}
 			if (i >= len) {
 #ifdef DEBUG_EEPROM
@@ -658,9 +652,8 @@ static void daqboard2000_activateReferenceDacs(struct comedi_device *dev)
 	/*  Set the + reference dac value in the FPGA */
 	fpga->refDacs = 0x80 | DAQBOARD2000_PosRefDacSelect;
 	for (timeout = 0; timeout < 20; timeout++) {
-		if ((fpga->dacControl & DAQBOARD2000_RefBusy) == 0) {
+		if ((fpga->dacControl & DAQBOARD2000_RefBusy) == 0)
 			break;
-		}
 		udelay(2);
 	}
 /*  printk("DAQBOARD2000_PosRefDacSelect %d\n", timeout);*/
@@ -668,9 +661,8 @@ static void daqboard2000_activateReferenceDacs(struct comedi_device *dev)
 	/*  Set the - reference dac value in the FPGA */
 	fpga->refDacs = 0x80 | DAQBOARD2000_NegRefDacSelect;
 	for (timeout = 0; timeout < 20; timeout++) {
-		if ((fpga->dacControl & DAQBOARD2000_RefBusy) == 0) {
+		if ((fpga->dacControl & DAQBOARD2000_RefBusy) == 0)
 			break;
-		}
 		udelay(2);
 	}
 /*  printk("DAQBOARD2000_NegRefDacSelect %d\n", timeout);*/
@@ -743,9 +735,9 @@ static int daqboard2000_attach(struct comedi_device *dev,
 	slot = it->options[1];
 
 	result = alloc_private(dev, sizeof(struct daqboard2000_private));
-	if (result < 0) {
+	if (result < 0)
 		return -ENOMEM;
-	}
+
 	for (card = pci_get_device(0x1616, 0x0409, NULL);
 	     card != NULL; card = pci_get_device(0x1616, 0x0409, card)) {
 		if (bus || slot) {
@@ -794,9 +786,8 @@ static int daqboard2000_attach(struct comedi_device *dev,
 	    ioremap(pci_resource_start(card, 0), DAQBOARD2000_PLX_SIZE);
 	devpriv->daq =
 	    ioremap(pci_resource_start(card, 2), DAQBOARD2000_DAQ_SIZE);
-	if (!devpriv->plx || !devpriv->daq) {
+	if (!devpriv->plx || !devpriv->daq)
 		return -ENOMEM;
-	}
 
 	result = alloc_subdevices(dev, 3);
 	if (result < 0)
@@ -869,18 +860,17 @@ static int daqboard2000_detach(struct comedi_device *dev)
 	if (dev->subdevices)
 		subdev_8255_cleanup(dev, dev->subdevices + 2);
 
-	if (dev->irq) {
+	if (dev->irq)
 		free_irq(dev->irq, dev);
-	}
+
 	if (devpriv) {
 		if (devpriv->daq)
 			iounmap(devpriv->daq);
 		if (devpriv->plx)
 			iounmap(devpriv->plx);
 		if (devpriv->pci_dev) {
-			if (devpriv->got_regions) {
+			if (devpriv->got_regions)
 				comedi_pci_disable(devpriv->pci_dev);
-			}
 			pci_dev_put(devpriv->pci_dev);
 		}
 	}

drivers/staging/comedi/drivers/das08.c

@@ -506,10 +506,8 @@ struct das08_board_struct das08_cs_boards[NUM_DAS08_CS_BOARDS] = {
 
 #ifdef CONFIG_COMEDI_PCI
 static DEFINE_PCI_DEVICE_TABLE(das08_pci_table) = {
-	{
-	PCI_VENDOR_ID_COMPUTERBOARDS, PCI_DEVICE_ID_PCIDAS08,
-		    PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
-	0}
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, PCI_DEVICE_ID_PCIDAS08) },
+	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, das08_pci_table);

drivers/staging/comedi/drivers/das08_cs.c

@@ -79,22 +79,20 @@ static int das08_cs_attach(struct comedi_device *dev,
 	if (ret < 0)
 		return ret;
 
-	printk("comedi%d: das08_cs: ", dev->minor);
+	dev_info(dev->hw_dev, "comedi%d: das08_cs:\n", dev->minor);
 	/*  deal with a pci board */
 
 	if (thisboard->bustype == pcmcia) {
 		if (link == NULL) {
-			printk(" no pcmcia cards found\n");
+			dev_err(dev->hw_dev, "no pcmcia cards found\n");
 			return -EIO;
 		}
 		iobase = link->resource[0]->start;
 	} else {
-		printk(" bug! board does not have PCMCIA bustype\n");
+		dev_err(dev->hw_dev, "bug! board does not have PCMCIA bustype\n");
 		return -EINVAL;
 	}
 
-	printk("\n");
-
 	return das08_common_attach(dev, iobase);
 }
 

drivers/staging/comedi/drivers/das16m1.c

@@ -384,20 +384,20 @@ static int das16m1_cmd_exec(struct comedi_device *dev,
 	byte = 0;
 	/* if we are using external start trigger (also board dislikes having
 	 * both start and conversion triggers external simultaneously) */
-	if (cmd->start_src == TRIG_EXT && cmd->convert_src != TRIG_EXT) {
+	if (cmd->start_src == TRIG_EXT && cmd->convert_src != TRIG_EXT)
 		byte |= EXT_TRIG_BIT;
-	}
+
 	outb(byte, dev->iobase + DAS16M1_CS);
 	/* clear interrupt bit */
 	outb(0, dev->iobase + DAS16M1_CLEAR_INTR);
 
 	/* enable interrupts and internal pacer */
 	devpriv->control_state &= ~PACER_MASK;
-	if (cmd->convert_src == TRIG_TIMER) {
+	if (cmd->convert_src == TRIG_TIMER)
 		devpriv->control_state |= INT_PACER;
-	} else {
+	else
 		devpriv->control_state |= EXT_PACER;
-	}
+
 	devpriv->control_state |= INTE;
 	outb(devpriv->control_state, dev->iobase + DAS16M1_INTR_CONTROL);
 
@@ -531,9 +531,8 @@ static void munge_sample_array(short *array, unsigned int num_elements)
 {
 	unsigned int i;
 
-	for (i = 0; i < num_elements; i++) {
+	for (i = 0; i < num_elements; i++)
 		array[i] = munge_sample(array[i]);
-	}
 }
 
 static void das16m1_handler(struct comedi_device *dev, unsigned int status)
@@ -668,25 +667,20 @@ static int das16m1_attach(struct comedi_device *dev,
 
 	iobase = it->options[0];
 
-	printk("comedi%d: das16m1:", dev->minor);
-
 	ret = alloc_private(dev, sizeof(struct das16m1_private_struct));
 	if (ret < 0)
 		return ret;
 
 	dev->board_name = thisboard->name;
 
-	printk(" io 0x%lx-0x%lx 0x%lx-0x%lx",
-	       iobase, iobase + DAS16M1_SIZE,
-	       iobase + DAS16M1_82C55, iobase + DAS16M1_82C55 + DAS16M1_SIZE2);
 	if (!request_region(iobase, DAS16M1_SIZE, driver_das16m1.driver_name)) {
-		printk(" I/O port conflict\n");
+		comedi_error(dev, "I/O port conflict\n");
 		return -EIO;
 	}
 	if (!request_region(iobase + DAS16M1_82C55, DAS16M1_SIZE2,
 			    driver_das16m1.driver_name)) {
 		release_region(iobase, DAS16M1_SIZE);
-		printk(" I/O port conflict\n");
+		comedi_error(dev, "I/O port conflict\n");
 		return -EIO;
 	}
 	dev->iobase = iobase;
@@ -697,17 +691,17 @@ static int das16m1_attach(struct comedi_device *dev,
 	if (das16m1_irq_bits(irq) >= 0) {
 		ret = request_irq(irq, das16m1_interrupt, 0,
 				  driver_das16m1.driver_name, dev);
-		if (ret < 0) {
-			printk(", irq unavailable\n");
+		if (ret < 0)
 			return ret;
-		}
 		dev->irq = irq;
-		printk(", irq %u\n", irq);
+		printk
+		    ("irq %u\n", irq);
 	} else if (irq == 0) {
-		printk(", no irq\n");
+		printk
+		    (", no irq\n");
 	} else {
-		printk(", invalid irq\n"
-		       " valid irqs are 2, 3, 5, 7, 10, 11, 12, or 15\n");
+		comedi_error(dev, "invalid irq\n"
+			     " valid irqs are 2, 3, 5, 7, 10, 11, 12, or 15\n");
 		return -EINVAL;
 	}
 
@@ -771,7 +765,6 @@ static int das16m1_attach(struct comedi_device *dev,
 
 static int das16m1_detach(struct comedi_device *dev)
 {
-	printk("comedi%d: das16m1: remove\n", dev->minor);
 
 /* das16m1_reset(dev); */
 

drivers/staging/comedi/drivers/das6402.c

@@ -171,7 +171,7 @@ static irqreturn_t intr_handler(int irq, void *d)
 	struct comedi_subdevice *s = dev->subdevices;
 
 	if (!dev->attached || devpriv->das6402_ignoreirq) {
-		printk("das6402: BUG: spurious interrupt\n");
+		dev_warn(dev->hw_dev, "BUG: spurious interrupt\n");
 		return IRQ_HANDLED;
 	}
 #ifdef DEBUG
@@ -228,9 +228,7 @@ static int das6402_ai_cancel(struct comedi_device *dev,
 	 */
 
 	devpriv->das6402_ignoreirq = 1;
-#ifdef DEBUG
-	printk("das6402: Stopping acquisition\n");
-#endif
+	dev_dbg(dev->hw_dev, "Stopping acquisition\n");
 	devpriv->das6402_ignoreirq = 1;
 	outb_p(0x02, dev->iobase + 10);	/* disable external trigging */
 	outw_p(SCANL, dev->iobase + 2);	/* resets the card fifo */
@@ -246,10 +244,7 @@ static int das6402_ai_mode2(struct comedi_device *dev,
 			    struct comedi_subdevice *s, comedi_trig * it)
 {
 	devpriv->das6402_ignoreirq = 1;
-
-#ifdef DEBUG
-	printk("das6402: Starting acquisition\n");
-#endif
+	dev_dbg(dev->hw_dev, "Starting acquisition\n");
 	outb_p(0x03, dev->iobase + 10);	/* enable external trigging */
 	outw_p(SCANL, dev->iobase + 2);	/* resets the card fifo */
 	outb_p(IRQ | CONVSRC | BURSTEN | INTE, dev->iobase + 9);
@@ -329,10 +324,8 @@ static int das6402_attach(struct comedi_device *dev,
 	if (iobase == 0)
 		iobase = 0x300;
 
-	printk("comedi%d: das6402: 0x%04lx", dev->minor, iobase);
-
 	if (!request_region(iobase, DAS6402_SIZE, "das6402")) {
-		printk(" I/O port conflict\n");
+		dev_err(dev->hw_dev, "I/O port conflict\n");
 		return -EIO;
 	}
 	dev->iobase = iobase;
@@ -340,14 +333,12 @@ static int das6402_attach(struct comedi_device *dev,
 	/* should do a probe here */
 
 	irq = it->options[0];
-	printk(" ( irq = %u )", irq);
+	dev_dbg(dev->hw_dev, "( irq = %u )\n", irq);
 	ret = request_irq(irq, intr_handler, 0, "das6402", dev);
-	if (ret < 0) {
-		printk("irq conflict\n");
+	if (ret < 0)
 		return ret;
-	}
-	dev->irq = irq;
 
+	dev->irq = irq;
 	ret = alloc_private(dev, sizeof(struct das6402_private));
 	if (ret < 0)
 		return ret;

drivers/staging/comedi/drivers/das800.c

@@ -296,47 +296,47 @@ static int das800_probe(struct comedi_device *dev)
 	switch (id_bits) {
 	case 0x0:
 		if (board == das800) {
-			printk(" Board model: DAS-800\n");
+			dev_dbg(dev->hw_dev, "Board model: DAS-800\n");
 			return board;
 		}
 		if (board == ciodas800) {
-			printk(" Board model: CIO-DAS800\n");
+			dev_dbg(dev->hw_dev, "Board model: CIO-DAS800\n");
 			return board;
 		}
-		printk(" Board model (probed): DAS-800\n");
+		dev_dbg(dev->hw_dev, "Board model (probed): DAS-800\n");
 		return das800;
 		break;
 	case 0x2:
 		if (board == das801) {
-			printk(" Board model: DAS-801\n");
+			dev_dbg(dev->hw_dev, "Board model: DAS-801\n");
 			return board;
 		}
 		if (board == ciodas801) {
-			printk(" Board model: CIO-DAS801\n");
+			dev_dbg(dev->hw_dev, "Board model: CIO-DAS801\n");
 			return board;
 		}
-		printk(" Board model (probed): DAS-801\n");
+		dev_dbg(dev->hw_dev, "Board model (probed): DAS-801\n");
 		return das801;
 		break;
 	case 0x3:
 		if (board == das802) {
-			printk(" Board model: DAS-802\n");
+			dev_dbg(dev->hw_dev, "Board model: DAS-802\n");
 			return board;
 		}
 		if (board == ciodas802) {
-			printk(" Board model: CIO-DAS802\n");
+			dev_dbg(dev->hw_dev, "Board model: CIO-DAS802\n");
 			return board;
 		}
 		if (board == ciodas80216) {
-			printk(" Board model: CIO-DAS802/16\n");
+			dev_dbg(dev->hw_dev, "Board model: CIO-DAS802/16\n");
 			return board;
 		}
-		printk(" Board model (probed): DAS-802\n");
+		dev_dbg(dev->hw_dev, "Board model (probed): DAS-802\n");
 		return das802;
 		break;
 	default:
-		printk(" Board model: probe returned 0x%x (unknown)\n",
-		       id_bits);
+		dev_dbg(dev->hw_dev, "Board model: probe returned 0x%x (unknown)\n",
+			id_bits);
 		return board;
 		break;
 	}
@@ -466,42 +466,43 @@ static int das800_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	unsigned long irq_flags;
 	int board;
 
-	printk("comedi%d: das800: io 0x%lx", dev->minor, iobase);
+	dev_info(dev->hw_dev, "comedi%d: das800: io 0x%lx\n", dev->minor,
+		 iobase);
 	if (irq)
-		printk(", irq %u", irq);
-	printk("\n");
+		dev_dbg(dev->hw_dev, "irq %u\n", irq);
 
 	/* allocate and initialize dev->private */
 	if (alloc_private(dev, sizeof(struct das800_private)) < 0)
 		return -ENOMEM;
 
 	if (iobase == 0) {
-		printk("io base address required for das800\n");
+		dev_err(dev->hw_dev, "io base address required for das800\n");
 		return -EINVAL;
 	}
 
 	/* check if io addresses are available */
 	if (!request_region(iobase, DAS800_SIZE, "das800")) {
-		printk("I/O port conflict\n");
+		dev_err(dev->hw_dev, "I/O port conflict\n");
 		return -EIO;
 	}
 	dev->iobase = iobase;
 
 	board = das800_probe(dev);
 	if (board < 0) {
-		printk("unable to determine board type\n");
+		dev_dbg(dev->hw_dev, "unable to determine board type\n");
 		return -ENODEV;
 	}
 	dev->board_ptr = das800_boards + board;
 
 	/* grab our IRQ */
 	if (irq == 1 || irq > 7) {
-		printk("irq out of range\n");
+		dev_err(dev->hw_dev, "irq out of range\n");
 		return -EINVAL;
 	}
 	if (irq) {
 		if (request_irq(irq, das800_interrupt, 0, "das800", dev)) {
-			printk("unable to allocate irq %u\n", irq);
+			dev_err(dev->hw_dev, "unable to allocate irq %u\n",
+				irq);
 			return -EINVAL;
 		}
 	}
@@ -557,7 +558,7 @@ static int das800_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 static int das800_detach(struct comedi_device *dev)
 {
-	printk("comedi%d: das800: remove\n", dev->minor);
+	dev_info(dev->hw_dev, "comedi%d: das800: remove\n", dev->minor);
 
 	/* only free stuff if it has been allocated by _attach */
 	if (dev->iobase)

drivers/staging/comedi/drivers/dt3000.c

@@ -383,7 +383,7 @@ static void dt3k_writesingle(struct comedi_device *dev, unsigned int subsys,
 	dt3k_send_cmd(dev, CMD_WRITESINGLE);
 }
 
-static int debug_n_ints = 0;
+static int debug_n_ints;
 
 /* FIXME! Assumes shared interrupt is for this card. */
 /* What's this debug_n_ints stuff? Obviously needs some work... */

drivers/staging/comedi/drivers/jr3_pci.c

@@ -71,18 +71,12 @@ static struct comedi_driver driver_jr3_pci = {
 };
 
 static DEFINE_PCI_DEVICE_TABLE(jr3_pci_pci_table) = {
-	{
-	PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_1_CHANNEL,
-		    PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
-	PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_1_CHANNEL_NEW,
-		    PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
-	PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_2_CHANNEL,
-		    PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
-	PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_3_CHANNEL,
-		    PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
-	PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_4_CHANNEL,
-		    PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
-	0}
+	{ PCI_DEVICE(PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_1_CHANNEL) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_1_CHANNEL_NEW) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_2_CHANNEL) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_3_CHANNEL) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_4_CHANNEL) },
+	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, jr3_pci_pci_table);

drivers/staging/comedi/drivers/ke_counter.c

@@ -52,10 +52,8 @@ static int cnt_attach(struct comedi_device *dev, struct comedi_devconfig *it);
 static int cnt_detach(struct comedi_device *dev);
 
 static DEFINE_PCI_DEVICE_TABLE(cnt_pci_table) = {
-	{
-	PCI_VENDOR_ID_KOLTER, CNT_CARD_DEVICE_ID, PCI_ANY_ID,
-		    PCI_ANY_ID, 0, 0, 0}, {
-	0}
+	{ PCI_DEVICE(PCI_VENDOR_ID_KOLTER, CNT_CARD_DEVICE_ID) },
+	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, cnt_pci_table);

drivers/staging/comedi/drivers/me_daq.c

@@ -188,12 +188,9 @@ static const struct comedi_lrange me2600_ao_range = {
 };
 
 static DEFINE_PCI_DEVICE_TABLE(me_pci_table) = {
-	{
-	PCI_VENDOR_ID_MEILHAUS, ME2600_DEVICE_ID, PCI_ANY_ID,
-		    PCI_ANY_ID, 0, 0, 0}, {
-	PCI_VENDOR_ID_MEILHAUS, ME2000_DEVICE_ID, PCI_ANY_ID,
-		    PCI_ANY_ID, 0, 0, 0}, {
-	0}
+	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, ME2600_DEVICE_ID) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, ME2000_DEVICE_ID) },
+	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, me_pci_table);

drivers/staging/comedi/drivers/ni_daq_dio24.c

@@ -52,7 +52,7 @@ the PCMCIA interface.
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
 
-static struct pcmcia_device *pcmcia_cur_dev = NULL;
+static struct pcmcia_device *pcmcia_cur_dev;
 
 #define DIO24_SIZE 4		/*  size of io region used by board */
 
@@ -133,22 +133,19 @@ static int dio24_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 #endif
 		break;
 	default:
-		printk("bug! couldn't determine board type\n");
+		pr_err("bug! couldn't determine board type\n");
 		return -EINVAL;
 		break;
 	}
-	printk("comedi%d: ni_daq_dio24: %s, io 0x%lx", dev->minor,
-	       thisboard->name, iobase);
+	pr_debug("comedi%d: ni_daq_dio24: %s, io 0x%lx", dev->minor,
+		 thisboard->name, iobase);
 #ifdef incomplete
-	if (irq) {
-		printk(", irq %u", irq);
-	}
+	if (irq)
+		pr_debug("irq %u\n", irq);
 #endif
 
-	printk("\n");
-
 	if (iobase == 0) {
-		printk("io base address is zero!\n");
+		pr_err("io base address is zero!\n");
 		return -EINVAL;
 	}
 
@@ -173,7 +170,7 @@ static int dio24_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 static int dio24_detach(struct comedi_device *dev)
 {
-	printk("comedi%d: ni_daq_dio24: remove\n", dev->minor);
+	dev_info(dev->hw_dev, "comedi%d: ni_daq_dio24: remove\n", dev->minor);
 
 	if (dev->subdevices)
 		subdev_8255_cleanup(dev, dev->subdevices + 0);

drivers/staging/comedi/drivers/ni_labpc_cs.c

@@ -145,7 +145,7 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		irq = link->irq;
 		break;
 	default:
-		printk("bug! couldn't determine board type\n");
+		pr_err("bug! couldn't determine board type\n");
 		return -EINVAL;
 		break;
 	}

drivers/staging/comedi/drivers/ni_pcimio.c

@@ -1470,7 +1470,7 @@ static void m_series_stc_writew(struct comedi_device *dev, uint16_t data,
 		/* FIXME: DIO_Output_Register (16 bit reg) is replaced by M_Offset_Static_Digital_Output (32 bit)
 		   and M_Offset_SCXI_Serial_Data_Out (8 bit) */
 	default:
-		printk("%s: bug! unhandled register=0x%x in switch.\n",
+		printk(KERN_WARNING "%s: bug! unhandled register=0x%x in switch.\n",
 		       __func__, reg);
 		BUG();
 		return;
@@ -1505,7 +1505,7 @@ static uint16_t m_series_stc_readw(struct comedi_device *dev, int reg)
 		offset = M_Offset_G01_Status;
 		break;
 	default:
-		printk("%s: bug! unhandled register=0x%x in switch.\n",
+		printk(KERN_WARNING "%s: bug! unhandled register=0x%x in switch.\n",
 		       __func__, reg);
 		BUG();
 		return 0;
@@ -1547,7 +1547,7 @@ static void m_series_stc_writel(struct comedi_device *dev, uint32_t data,
 		offset = M_Offset_G1_Load_B;
 		break;
 	default:
-		printk("%s: bug! unhandled register=0x%x in switch.\n",
+		printk(KERN_WARNING "%s: bug! unhandled register=0x%x in switch.\n",
 		       __func__, reg);
 		BUG();
 		return;
@@ -1573,7 +1573,7 @@ static uint32_t m_series_stc_readl(struct comedi_device *dev, int reg)
 		offset = M_Offset_G1_Save;
 		break;
 	default:
-		printk("%s: bug! unhandled register=0x%x in switch.\n",
+		printk(KERN_WARNING "%s: bug! unhandled register=0x%x in switch.\n",
 		       __func__, reg);
 		BUG();
 		return 0;
@@ -1632,9 +1632,8 @@ static void m_series_init_eeprom_buffer(struct comedi_device *dev)
 	}
 	devpriv->serial_number = be32_to_cpu(devpriv->serial_number);
 
-	for (i = 0; i < M_SERIES_EEPROM_SIZE; ++i) {
+	for (i = 0; i < M_SERIES_EEPROM_SIZE; ++i)
 		devpriv->eeprom_buffer[i] = ni_readb(Start_Cal_EEPROM + i);
-	}
 
 	writel(old_iodwbsr1_bits, devpriv->mite->mite_io_addr + MITE_IODWBSR_1);
 	writel(old_iodwbsr_bits, devpriv->mite->mite_io_addr + MITE_IODWBSR);
@@ -1665,9 +1664,9 @@ static void init_6143(struct comedi_device *dev)
 static int pcimio_detach(struct comedi_device *dev)
 {
 	mio_common_detach(dev);
-	if (dev->irq) {
+	if (dev->irq)
 		free_irq(dev->irq, dev);
-	}
+
 	if (dev->private) {
 		mite_free_ring(devpriv->ai_mite_ring);
 		mite_free_ring(devpriv->ao_mite_ring);
@@ -1685,7 +1684,7 @@ static int pcimio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret;
 
-	printk("comedi%d: ni_pcimio:", dev->minor);
+	dev_info(dev->hw_dev, "comedi%d: ni_pcimio:\n", dev->minor);
 
 	ret = ni_alloc_private(dev);
 	if (ret < 0)
@@ -1695,7 +1694,7 @@ static int pcimio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	if (ret < 0)
 		return ret;
 
-	printk(" %s", boardtype.name);
+	dev_dbg(dev->hw_dev, "%s\n", boardtype.name);
 	dev->board_name = boardtype.name;
 
 	if (boardtype.reg_type & ni_reg_m_series_mask) {
@@ -1712,7 +1711,7 @@ static int pcimio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 	ret = mite_setup(devpriv->mite);
 	if (ret < 0) {
-		printk(" error setting up mite\n");
+		pr_warn("error setting up mite\n");
 		return ret;
 	}
 	comedi_set_hw_dev(dev, &devpriv->mite->pcidev->dev);
@@ -1740,13 +1739,13 @@ static int pcimio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	dev->irq = mite_irq(devpriv->mite);
 
 	if (dev->irq == 0) {
-		printk(" unknown irq (bad)\n");
+		pr_warn("unknown irq (bad)\n");
 	} else {
-		printk(" ( irq = %u )", dev->irq);
+		pr_debug("( irq = %u )\n", dev->irq);
 		ret = request_irq(dev->irq, ni_E_interrupt, NI_E_IRQ_FLAGS,
 				  DRV_NAME, dev);
 		if (ret < 0) {
-			printk(" irq not available\n");
+			pr_warn("irq not available\n");
 			dev->irq = 0;
 		}
 	}
@@ -1787,7 +1786,7 @@ static int pcimio_find_device(struct comedi_device *dev, int bus, int slot)
 			}
 		}
 	}
-	printk("no device found\n");
+	pr_warn("no device found\n");
 	mite_list_devices();
 	return -EIO;
 }

drivers/staging/comedi/drivers/pcl816.c

@@ -155,8 +155,8 @@ static int pcl816_attach(struct comedi_device *dev,
 static int pcl816_detach(struct comedi_device *dev);
 
 #ifdef unused
-static int RTC_lock = 0;	/* RTC lock */
-static int RTC_timer_lock = 0;	/* RTC int lock */
+static int RTC_lock;	/* RTC lock */
+static int RTC_timer_lock;	/* RTC int lock */
 #endif
 
 static struct comedi_driver driver_pcl816 = {

drivers/staging/comedi/drivers/pcl818.c

@@ -252,8 +252,8 @@ static int pcl818_attach(struct comedi_device *dev,
 static int pcl818_detach(struct comedi_device *dev);
 
 #ifdef unused
-static int RTC_lock = 0;	/* RTC lock */
-static int RTC_timer_lock = 0;	/* RTC int lock */
+static int RTC_lock;	/* RTC lock */
+static int RTC_timer_lock;	/* RTC int lock */
 #endif
 
 struct pcl818_board {
@@ -463,9 +463,8 @@ static int pcl818_ao_insn_read(struct comedi_device *dev,
 	int n;
 	int chan = CR_CHAN(insn->chanspec);
 
-	for (n = 0; n < insn->n; n++) {
+	for (n = 0; n < insn->n; n++)
 		data[n] = devpriv->ao_readback[chan];
-	}
 
 	return n;
 }
@@ -571,9 +570,9 @@ static irqreturn_t interrupt_pcl818_ai_mode13_int(int irq, void *d)
 		return IRQ_HANDLED;
 	}
 	devpriv->act_chanlist_pos++;
-	if (devpriv->act_chanlist_pos >= devpriv->act_chanlist_len) {
+	if (devpriv->act_chanlist_pos >= devpriv->act_chanlist_len)
 		devpriv->act_chanlist_pos = 0;
-	}
+
 	s->async->cur_chan++;
 	if (s->async->cur_chan >= devpriv->ai_n_chan) {
 		/*  printk("E"); */
@@ -645,9 +644,9 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d)
 		comedi_buf_put(s->async, ptr[bufptr++] >> 4);	/*  get one sample */
 
 		devpriv->act_chanlist_pos++;
-		if (devpriv->act_chanlist_pos >= devpriv->act_chanlist_len) {
+		if (devpriv->act_chanlist_pos >= devpriv->act_chanlist_len)
 			devpriv->act_chanlist_pos = 0;
-		}
+
 		s->async->cur_chan++;
 		if (s->async->cur_chan >= devpriv->ai_n_chan) {
 			s->async->cur_chan = 0;
@@ -805,11 +804,10 @@ static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d)
 		return IRQ_HANDLED;
 	}
 
-	if (lo & 2) {
+	if (lo & 2)
 		len = 512;
-	} else {
+	else
 		len = 0;
-	}
 
 	for (i = 0; i < len; i++) {
 		lo = inb(dev->iobase + PCL818_FI_DATALO);
@@ -827,9 +825,9 @@ static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d)
 		comedi_buf_put(s->async, (lo >> 4) | (inb(dev->iobase + PCL818_FI_DATAHI) << 4));	/*  get one sample */
 
 		devpriv->act_chanlist_pos++;
-		if (devpriv->act_chanlist_pos >= devpriv->act_chanlist_len) {
+		if (devpriv->act_chanlist_pos >= devpriv->act_chanlist_len)
 			devpriv->act_chanlist_pos = 0;
-		}
+
 		s->async->cur_chan++;
 		if (s->async->cur_chan >= devpriv->ai_n_chan) {
 			s->async->cur_chan = 0;
@@ -1009,7 +1007,7 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device *dev,
 	int divisor1 = 0, divisor2 = 0;
 	unsigned int seglen;
 
-	printk("pcl818_ai_cmd_mode()\n");
+	dev_dbg(dev->hw_dev, "pcl818_ai_cmd_mode()\n");
 	if ((!dev->irq) && (!devpriv->dma_rtc)) {
 		comedi_error(dev, "IRQ not defined!");
 		return -EINVAL;
@@ -1112,7 +1110,7 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device *dev,
 		break;
 	}
 #endif
-	printk("pcl818_ai_cmd_mode() end\n");
+	dev_dbg(dev->hw_dev, "pcl818_ai_cmd_mode() end\n");
 	return 0;
 }
 
@@ -1309,11 +1307,9 @@ static void setup_channel_list(struct comedi_device *dev,
 */
 static int check_single_ended(unsigned int port)
 {
-	if (inb(port + PCL818_STATUS) & 0x20) {
+	if (inb(port + PCL818_STATUS) & 0x20)
 		return 1;
-	} else {
-		return 0;
-	}
+	return 0;
 }
 
 /*
@@ -1352,9 +1348,8 @@ static int ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
 	if (!cmd->stop_src || tmp != cmd->stop_src)
 		err++;
 
-	if (err) {
+	if (err)
 		return 1;
-	}
 
 	/* step 2: make sure trigger sources are unique and mutually compatible */
 
@@ -1377,9 +1372,8 @@ static int ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
 	if (cmd->stop_src != TRIG_NONE && cmd->stop_src != TRIG_COUNT)
 		err++;
 
-	if (err) {
+	if (err)
 		return 2;
-	}
 
 	/* step 3: make sure arguments are trivially compatible */
 
@@ -1421,9 +1415,8 @@ static int ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
 		}
 	}
 
-	if (err) {
+	if (err)
 		return 3;
-	}
 
 	/* step 4: fix up any arguments */
 
@@ -1438,9 +1431,8 @@ static int ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
 			err++;
 	}
 
-	if (err) {
+	if (err)
 		return 4;
-	}
 
 	/* step 5: complain about special chanlist considerations */
 
@@ -1461,7 +1453,7 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	struct comedi_cmd *cmd = &s->async->cmd;
 	int retval;
 
-	printk("pcl818_ai_cmd()\n");
+	dev_dbg(dev->hw_dev, "pcl818_ai_cmd()\n");
 	devpriv->ai_n_chan = cmd->chanlist_len;
 	devpriv->ai_chanlist = cmd->chanlist;
 	devpriv->ai_flags = cmd->flags;
@@ -1470,17 +1462,16 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	devpriv->ai_timer1 = 0;
 	devpriv->ai_timer2 = 0;
 
-	if (cmd->stop_src == TRIG_COUNT) {
+	if (cmd->stop_src == TRIG_COUNT)
 		devpriv->ai_scans = cmd->stop_arg;
-	} else {
+	else
 		devpriv->ai_scans = 0;
-	}
 
 	if (cmd->scan_begin_src == TRIG_FOLLOW) {	/*  mode 1, 3 */
 		if (cmd->convert_src == TRIG_TIMER) {	/*  mode 1 */
 			devpriv->ai_timer1 = cmd->convert_arg;
 			retval = pcl818_ai_cmd_mode(1, dev, s);
-			printk("pcl818_ai_cmd() end\n");
+			dev_dbg(dev->hw_dev, "pcl818_ai_cmd() end\n");
 			return retval;
 		}
 		if (cmd->convert_src == TRIG_EXT) {	/*  mode 3 */
@@ -1499,7 +1490,7 @@ static int pcl818_ai_cancel(struct comedi_device *dev,
 			    struct comedi_subdevice *s)
 {
 	if (devpriv->irq_blocked > 0) {
-		printk("pcl818_ai_cancel()\n");
+		dev_dbg(dev->hw_dev, "pcl818_ai_cancel()\n");
 		devpriv->irq_was_now_closed = 1;
 
 		switch (devpriv->ai_mode) {
@@ -1549,7 +1540,7 @@ static int pcl818_ai_cancel(struct comedi_device *dev,
 	}
 
 end:
-	printk("pcl818_ai_cancel() end\n");
+	dev_dbg(dev->hw_dev, "pcl818_ai_cancel() end\n");
 	return 0;
 }
 
@@ -1633,11 +1624,11 @@ static int set_rtc_irq_bit(unsigned char bit)
 	save_flags(flags);
 	cli();
 	val = CMOS_READ(RTC_CONTROL);
-	if (bit) {
+	if (bit)
 		val |= RTC_PIE;
-	} else {
+	else
 		val &= ~RTC_PIE;
-	}
+
 	CMOS_WRITE(val, RTC_CONTROL);
 	CMOS_READ(RTC_INTR_FLAGS);
 	restore_flags(flags);
@@ -1754,22 +1745,23 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 	/* claim our I/O space */
 	iobase = it->options[0];
-	printk("comedi%d: pcl818:  board=%s, ioport=0x%03lx",
-	       dev->minor, this_board->name, iobase);
+	printk
+	    ("comedi%d: pcl818:  board=%s, ioport=0x%03lx",
+	     dev->minor, this_board->name, iobase);
 	devpriv->io_range = this_board->io_range;
 	if ((this_board->fifo) && (it->options[2] == -1)) {	/*  we've board with FIFO and we want to use FIFO */
 		devpriv->io_range = PCLx1xFIFO_RANGE;
 		devpriv->usefifo = 1;
 	}
 	if (!request_region(iobase, devpriv->io_range, "pcl818")) {
-		printk("I/O port conflict\n");
+		comedi_error(dev, "I/O port conflict\n");
 		return -EIO;
 	}
 
 	dev->iobase = iobase;
 
 	if (pcl818_check(iobase)) {
-		printk(", I can't detect board. FAIL!\n");
+		comedi_error(dev, "I can't detect board. FAIL!\n");
 		return -EIO;
 	}
 
@@ -1793,19 +1785,18 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 					     irq);
 					irq = 0;	/* Can't use IRQ */
 				} else {
-					printk(", irq=%u", irq);
+					printk(KERN_DEBUG "irq=%u", irq);
 				}
 			}
 		}
 	}
 
 	dev->irq = irq;
-	if (irq) {
-		devpriv->irq_free = 1;
-	} /* 1=we have allocated irq */
-	else {
+	if (irq)
+		devpriv->irq_free = 1;   /* 1=we have allocated irq */
+	else
 		devpriv->irq_free = 0;
-	}
+
 	devpriv->irq_blocked = 0;	/* number of subdevice which use IRQ */
 	devpriv->ai_mode = 0;	/* mode of irq */
 
@@ -1825,7 +1816,7 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 				 "pcl818 DMA (RTC)", dev)) {
 			devpriv->dma_rtc = 1;
 			devpriv->rtc_irq = RTC_IRQ;
-			printk(", dma_irq=%u", devpriv->rtc_irq);
+			printk(KERN_DEBUG "dma_irq=%u", devpriv->rtc_irq);
 		} else {
 			RTC_lock--;
 			if (RTC_lock == 0) {
@@ -1850,34 +1841,26 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		if (dma < 1)
 			goto no_dma;	/* DMA disabled */
 		if (((1 << dma) & this_board->DMAbits) == 0) {
-			printk(", DMA is out of allowed range, FAIL!\n");
+			printk(KERN_ERR "DMA is out of allowed range, FAIL!\n");
 			return -EINVAL;	/* Bad DMA */
 		}
 		ret = request_dma(dma, "pcl818");
-		if (ret) {
-			printk(", unable to allocate DMA %u, FAIL!\n", dma);
+		if (ret)
 			return -EBUSY;	/* DMA isn't free */
-		}
 		devpriv->dma = dma;
-		printk(", dma=%u", dma);
 		pages = 2;	/* we need 16KB */
 		devpriv->dmabuf[0] = __get_dma_pages(GFP_KERNEL, pages);
-		if (!devpriv->dmabuf[0]) {
-			printk(", unable to allocate DMA buffer, FAIL!\n");
+		if (!devpriv->dmabuf[0])
 			/* maybe experiment with try_to_free_pages() will help .... */
 			return -EBUSY;	/* no buffer :-( */
-		}
 		devpriv->dmapages[0] = pages;
 		devpriv->hwdmaptr[0] = virt_to_bus((void *)devpriv->dmabuf[0]);
 		devpriv->hwdmasize[0] = (1 << pages) * PAGE_SIZE;
 		/* printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE); */
 		if (devpriv->dma_rtc == 0) {	/*  we must do duble buff :-( */
 			devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages);
-			if (!devpriv->dmabuf[1]) {
-				printk
-				    (", unable to allocate DMA buffer, FAIL!\n");
+			if (!devpriv->dmabuf[1])
 				return -EBUSY;
-			}
 			devpriv->dmapages[1] = pages;
 			devpriv->hwdmaptr[1] =
 			    virt_to_bus((void *)devpriv->dmabuf[1]);
@@ -2017,11 +2000,10 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	}
 
 	/* select 1/10MHz oscilator */
-	if ((it->options[3] == 0) || (it->options[3] == 10)) {
+	if ((it->options[3] == 0) || (it->options[3] == 10))
 		devpriv->i8253_osc_base = 100;
-	} else {
+	else
 		devpriv->i8253_osc_base = 1000;
-	}
 
 	/* max sampling speed */
 	devpriv->ns_min = this_board->ns_min;

drivers/staging/comedi/drivers/pcmmio.c

@@ -371,15 +371,15 @@ static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	iobase = it->options[0];
 	irq[0] = it->options[1];
 
-	printk(KERN_INFO "comedi%d: %s: io: %lx ", dev->minor, driver.driver_name,
-	       iobase);
+	printk(KERN_INFO "comedi%d: %s: io: %lx attaching...\n", dev->minor,
+			driver.driver_name, iobase);
 
 	dev->iobase = iobase;
 
 	if (!iobase || !request_region(iobase,
 				       thisboard->total_iosize,
 				       driver.driver_name)) {
-		printk(KERN_ERR "I/O port conflict\n");
+		printk(KERN_ERR "comedi%d: I/O port conflict\n", dev->minor);
 		return -EIO;
 	}
 
@@ -394,7 +394,8 @@ static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
  * convenient macro defined in comedidev.h.
  */
 	if (alloc_private(dev, sizeof(struct pcmmio_private)) < 0) {
-		printk(KERN_ERR "cannot allocate private data structure\n");
+		printk(KERN_ERR "comedi%d: cannot allocate private data structure\n",
+				dev->minor);
 		return -ENOMEM;
 	}
 
@@ -417,7 +418,8 @@ static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	    kcalloc(n_subdevs, sizeof(struct pcmmio_subdev_private),
 		    GFP_KERNEL);
 	if (!devpriv->sprivs) {
-		printk(KERN_ERR "cannot allocate subdevice private data structures\n");
+		printk(KERN_ERR "comedi%d: cannot allocate subdevice private data structures\n",
+				dev->minor);
 		return -ENOMEM;
 	}
 	/*
@@ -427,7 +429,8 @@ static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	 * Allocate 1 AI + 1 AO + 2 DIO subdevs (24 lines per DIO)
 	 */
 	if (alloc_subdevices(dev, n_subdevs) < 0) {
-		printk(KERN_ERR "cannot allocate subdevice data structures\n");
+		printk(KERN_ERR "comedi%d: cannot allocate subdevice data structures\n",
+				dev->minor);
 		return -ENOMEM;
 	}
 
@@ -557,14 +560,15 @@ static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 				 */
 
 	if (irq[0]) {
-		printk(KERN_DEBUG "irq: %u ", irq[0]);
+		printk(KERN_DEBUG "comedi%d: irq: %u\n", dev->minor, irq[0]);
 		if (thisboard->dio_num_asics == 2 && irq[1])
-			printk(KERN_DEBUG "second ASIC irq: %u ", irq[1]);
+			printk(KERN_DEBUG "comedi%d: second ASIC irq: %u\n",
+					dev->minor, irq[1]);
 	} else {
-		printk(KERN_INFO "(IRQ mode disabled) ");
+		printk(KERN_INFO "comedi%d: (IRQ mode disabled)\n", dev->minor);
 	}
 
-	printk(KERN_INFO "attached\n");
+	printk(KERN_INFO "comedi%d: attached\n", dev->minor);
 
 	return 1;
 }
@@ -663,7 +667,7 @@ static int pcmmio_dio_insn_bits(struct comedi_device *dev,
 		}
 #ifdef DAMMIT_ITS_BROKEN
 		/* DEBUG */
-		printk(KERN_DEBUG "data_out_byte %02x\n", (unsigned)byte);
+		printk("data_out_byte %02x\n", (unsigned)byte);
 #endif
 		/* save the digital input lines for this byte.. */
 		s->state |= ((unsigned int)byte) << offset;

drivers/staging/comedi/drivers/pcmuio.c

@@ -951,14 +951,13 @@ pcmuio_inttrig_start_intr(struct comedi_device *dev, struct comedi_subdevice *s,
 
 	spin_lock_irqsave(&subpriv->intr.spinlock, flags);
 	s->async->inttrig = 0;
-	if (subpriv->intr.active) {
+	if (subpriv->intr.active)
 		event = pcmuio_start_intr(dev, s);
-	}
+
 	spin_unlock_irqrestore(&subpriv->intr.spinlock, flags);
 
-	if (event) {
+	if (event)
 		comedi_event(dev, s);
-	}
 
 	return 1;
 }
@@ -1000,9 +999,8 @@ static int pcmuio_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	}
 	spin_unlock_irqrestore(&subpriv->intr.spinlock, flags);
 
-	if (event) {
+	if (event)
 		comedi_event(dev, s);
-	}
 
 	return 0;
 }

drivers/staging/comedi/drivers/serial2002.c

@@ -824,7 +824,7 @@ static int serial2002_attach(struct comedi_device *dev,
 {
 	struct comedi_subdevice *s;
 
-	printk("comedi%d: serial2002: ", dev->minor);
+	dev_dbg(dev->hw_dev, "comedi%d: attached\n", dev->minor);
 	dev->board_name = thisboard->name;
 	if (alloc_private(dev, sizeof(struct serial2002_private)) < 0)
 		return -ENOMEM;
@@ -832,7 +832,8 @@ static int serial2002_attach(struct comedi_device *dev,
 	dev->close = serial_2002_close;
 	devpriv->port = it->options[0];
 	devpriv->speed = it->options[1];
-	printk("/dev/ttyS%d @ %d\n", devpriv->port, devpriv->speed);
+	dev_dbg(dev->hw_dev, "/dev/ttyS%d @ %d\n", devpriv->port,
+		devpriv->speed);
 
 	if (alloc_subdevices(dev, 5) < 0)
 		return -ENOMEM;
@@ -891,7 +892,7 @@ static int serial2002_detach(struct comedi_device *dev)
 	struct comedi_subdevice *s;
 	int i;
 
-	printk("comedi%d: serial2002: remove\n", dev->minor);
+	dev_dbg(dev->hw_dev, "comedi%d: remove\n", dev->minor);
 	for (i = 0; i < 5; i++) {
 		s = &dev->subdevices[i];
 		kfree(s->maxdata_list);

drivers/staging/comedi/drivers/usbduxsigma.c

@@ -1524,15 +1524,17 @@ static int usbdux_ao_inttrig(struct comedi_device *dev,
 		return -EFAULT;
 
 	down(&this_usbduxsub->sem);
+
 	if (!(this_usbduxsub->probed)) {
-		up(&this_usbduxsub->sem);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto out;
 	}
 	if (trignum != 0) {
 		dev_err(&this_usbduxsub->interface->dev,
 			"comedi%d: usbdux_ao_inttrig: invalid trignum\n",
 			dev->minor);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out;
 	}
 	if (!(this_usbduxsub->ao_cmd_running)) {
 		this_usbduxsub->ao_cmd_running = 1;
@@ -1542,8 +1544,7 @@ static int usbdux_ao_inttrig(struct comedi_device *dev,
 				"comedi%d: usbdux_ao_inttrig: submitURB: "
 				"err=%d\n", dev->minor, ret);
 			this_usbduxsub->ao_cmd_running = 0;
-			up(&this_usbduxsub->sem);
-			return ret;
+			goto out;
 		}
 		s->async->inttrig = NULL;
 	} else {
@@ -1551,8 +1552,10 @@ static int usbdux_ao_inttrig(struct comedi_device *dev,
 			"comedi%d: ao_inttrig but acqu is already running.\n",
 			dev->minor);
 	}
+	ret = 1;
+out:
 	up(&this_usbduxsub->sem);
-	return 1;
+	return ret;
 }
 
 static int usbdux_ao_cmdtest(struct comedi_device *dev,
@@ -2689,6 +2692,7 @@ static int usbduxsigma_attach(struct comedi_device *dev,
 	if (ret < 0) {
 		dev_err(&udev->interface->dev,
 			"comedi%d: no space for subdev\n", dev->minor);
+		up(&udev->sem);
 		up(&start_stop_sem);
 		return ret;
 	}

drivers/staging/cxt1e1/comet.h

@@ -1,7 +1,3 @@
-/*
- * $Id: comet.h,v 1.3 2005/09/28 00:10:07 rickd PMCC4_3_1B $
- */
-
 #ifndef _INC_COMET_H_
 #define _INC_COMET_H_
 
@@ -23,27 +19,9 @@
  * For further information, contact via email: support@sbei.com
  * SBE, Inc.  San Ramon, California  U.S.A.
  *-----------------------------------------------------------------------------
- * RCS info:
- * RCS revision: $Revision: 1.3 $
- * Last changed on $Date: 2005/09/28 00:10:07 $
- * Changed by $Author: rickd $
- *-----------------------------------------------------------------------------
- * $Log: comet.h,v $
- * Revision 1.3  2005/09/28 00:10:07  rickd
- * Add RCS header. Switch to structure usage.
- *
- * Revision 1.2  2005/04/28 23:43:03  rickd
- * Add RCS tracking heading.
- *
- *-----------------------------------------------------------------------------
  */
 
-#if defined(__FreeBSD__) || defined (__NetBSD__)
-#include <sys/types.h>
-#else
 #include <linux/types.h>
-#endif
-
 
 #define VINT32  volatile u_int32_t
 

drivers/staging/cxt1e1/comet_tables.c

@@ -1,7 +1,3 @@
-/*
- * $Id: comet_tables.c,v 1.2 2005/10/17 23:55:27 rickd PMCC4_3_1B $
- */
-
 /*-----------------------------------------------------------------------------
  * comet_tables.c - waveform tables for the PM4351 'COMET'
  *
@@ -20,28 +16,8 @@
  * For further information, contact via email: support@sbei.com
  * SBE, Inc.  San Ramon, California  U.S.A.
  *-----------------------------------------------------------------------------
- * RCS info:
- * RCS revision: $Revision: 1.2 $
- * Last changed on $Date: 2005/10/17 23:55:27 $
- * Changed by $Author: rickd $
- *-----------------------------------------------------------------------------
- * $Log: comet_tables.c,v $
- * Revision 1.2  2005/10/17 23:55:27  rickd
- * Note that 75 Ohm transmit waveform is not supported on PMCC4.
- *
- * Revision 1.1  2005/09/28 00:10:05  rickd
- * Cosmetic alignment of tables for readability.
- *
- * Revision 1.0  2005/05/10 22:47:53  rickd
- * Initial revision
- *
- *-----------------------------------------------------------------------------
  */
 
-char SBEid_pmcc4_comet_tblc[] =
-  "@(#)comet_tables.c - $Revision: 1.2 $      (c) Copyright 2004-2005 SBE, Inc.";
-
-
 #include <linux/types.h>
 
 /*****************************************************************************

drivers/staging/cxt1e1/comet_tables.h

@@ -1,7 +1,3 @@
-/*
- * $Id: comet_tables.h,v 1.5 2006/01/02 22:37:31 rickd PMCC4_3_1B $
- */
-
 #ifndef _INC_COMET_TBLS_H_
 #define _INC_COMET_TBLS_H_
 
@@ -23,26 +19,6 @@
  * For further information, contact via email: support@sbei.com
  * SBE, Inc.  San Ramon, California  U.S.A.
  *-----------------------------------------------------------------------------
- * RCS info:
- * RCS revision: $Revision: 1.5 $
- * Last changed on $Date: 2006/01/02 22:37:31 $
- * Changed by $Author: rickd $
- *-----------------------------------------------------------------------------
- * $Log: comet_tables.h,v $
- * Revision 1.5  2006/01/02 22:37:31  rickd
- * Double indexed arrays need sizings to avoid CC errors under
- * gcc 4.0.0
- *
- * Revision 1.4  2005/10/17 23:55:28  rickd
- * The 75 Ohm transmit waveform is not supported on PMCC4.
- *
- * Revision 1.3  2005/09/28 00:10:08  rickd
- * Add GNU License info. Structures moved to -C- file.
- *
- * Revision 1.2  2005/04/28 23:43:04  rickd
- * Add RCS tracking heading.
- *
- *-----------------------------------------------------------------------------
  */
 
 

drivers/staging/cxt1e1/libsbew.h

@@ -1,7 +1,3 @@
-/*
- * $Id: libsbew.h,v 2.1 2005/10/27 18:54:19 rickd PMCC4_3_1B $
- */
-
 #ifndef _INC_LIBSBEW_H_
 #define _INC_LIBSBEW_H_
 
@@ -25,32 +21,8 @@
  * For further information, contact via email: support@sbei.com
  * SBE, Inc.  San Ramon, California  U.S.A.
  *-----------------------------------------------------------------------------
- * RCS info:
- * RCS revision: $Revision: 2.1 $
- * Last changed on $Date: 2005/10/27 18:54:19 $
- * Changed by $Author: rickd $
- *-----------------------------------------------------------------------------
- * $Log: libsbew.h,v $
- * Revision 2.1  2005/10/27 18:54:19  rickd
- * Add E1PLAIN support.
- *
- * Revision 2.0  2005/09/28 00:10:08  rickd
- * Customized for PMCC4 comet-per-port design.
- *
- * Revision 1.15  2005/03/29 00:51:31  rickd
- * File imported from C1T3 port, Revision 1.15
- *-----------------------------------------------------------------------------
  */
 
-#ifndef __KERNEL__
-#include <sys/types.h>
-#endif
-
-#ifdef __cplusplus
-extern      "C"
-{
-#endif
-
 /********************************/
 /**  set driver logging level  **/
 /********************************/
@@ -574,8 +546,4 @@ struct sbecom_port_param
     extern int  wancfg_set_tsioc (wcfg_t *, struct wanc1t3_ts_param *);
 #endif
 
-#ifdef __cplusplus
-}
-#endif
-
 #endif                          /*** _INC_LIBSBEW_H_ ***/

drivers/staging/cxt1e1/musycc.c

@@ -1,7 +1,3 @@
-/*
- * $Id: musycc.c,v 2.1 2007/08/15 23:32:17 rickd PMCC4_3_1B $
- */
-
 unsigned int max_intcnt = 0;
 unsigned int max_bh = 0;
 
@@ -24,53 +20,8 @@ unsigned int max_bh = 0;
  * For further information, contact via email: support@onestopsystems.com
  * One Stop Systems, Inc.  Escondido, California  U.S.A.
  *-----------------------------------------------------------------------------
- * RCS info:
- * RCS revision: $Revision: 2.1 $
- * Last changed on $Date: 2007/08/15 23:32:17 $
- * Changed by $Author: rickd $
- *-----------------------------------------------------------------------------
- * $Log: musycc.c,v $
- * Revision 2.1  2007/08/15 23:32:17  rickd
- * Use 'if 0' instead of GNU comment delimeter to avoid line wrap induced compiler errors.
- *
- * Revision 2.0  2007/08/15 22:13:20  rickd
- * Update to printf pointer %p usage and correct some UINT to ULONG for
- * 64bit comptibility.
- *
- * Revision 1.7  2006/04/21 00:56:40  rickd
- * workqueue files now prefixed with <sbecom> prefix.
- *
- * Revision 1.6  2005/10/27 18:54:19  rickd
- * Clean out old code.  Default to HDLC_FCS16, not TRANS.
- *
- * Revision 1.5  2005/10/17 23:55:28  rickd
- * Initial port of NCOMM support patches from original work found
- * in pmc_c4t1e1 as updated by NCOMM.  Ref: CONFIG_SBE_PMCC4_NCOMM.
- *
- * Revision 1.4  2005/10/13 20:35:25  rickd
- * Cleanup warning for unused <flags> variable.
- *
- * Revision 1.3  2005/10/13 19:19:22  rickd
- * Disable redundant driver removal cleanup code.
- *
- * Revision 1.2  2005/10/11 18:36:16  rickd
- * Clean up warning messages caused by de-implemented some <flags> associated
- * with spin_lock() removals.
- *
- * Revision 1.1  2005/10/05 00:45:28  rickd
- * Re-enable xmit on flow-controlled and full channel to fix restart hang.
- * Add some temp spin-lock debug code (rld_spin_owner).
- *
- * Revision 1.0  2005/09/28 00:10:06  rickd
- * Initial release for C4T1E1 support. Lots of transparent
- * mode updates.
- *
- *-----------------------------------------------------------------------------
  */
 
-char        SBEid_pmcc4_musyccc[] =
-"@(#)musycc.c - $Revision: 2.1 $      (c) Copyright 2004-2006 SBE, Inc.";
-
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/types.h>

drivers/staging/cxt1e1/musycc.h

@@ -1,7 +1,3 @@
-/*
- * $Id: musycc.h,v 1.3 2005/09/28 00:10:08 rickd PMCC4_3_1B $
- */
-
 #ifndef _INC_MUSYCC_H_
 #define _INC_MUSYCC_H_
 
@@ -24,36 +20,13 @@
  * For further information, contact via email: support@sbei.com
  * SBE, Inc.  San Ramon, California  U.S.A.
  *-----------------------------------------------------------------------------
- * RCS info:
- * RCS revision: $Revision: 1.3 $
- * Last changed on $Date: 2005/09/28 00:10:08 $
- * Changed by $Author: rickd $
- *-----------------------------------------------------------------------------
- * $Log: musycc.h,v $
- * Revision 1.3  2005/09/28 00:10:08  rickd
- * Add GNU license info. Add PMCC4 PCI/DevIDs.  Implement new
- * musycc reg&bits namings. Use PORTMAP_0 GCD grouping.
- *
- * Revision 1.2  2005/04/28 23:43:04  rickd
- * Add RCS tracking heading.
- *
- *-----------------------------------------------------------------------------
  */
 
-#if defined (__FreeBSD__) || defined (__NetBSD__)
-#include <sys/types.h>
-#else
 #include <linux/types.h>
-#endif
 
 #define VINT8   volatile u_int8_t
 #define VINT32  volatile u_int32_t
 
-#ifdef __cplusplus
-extern      "C"
-{
-#endif
-
 #include "pmcc4_defs.h"
 
 
@@ -448,10 +421,6 @@ extern      "C"
 /*  This must be defined on an entire channel group (Port) basis */
 #define SUERM_THRESHOLD     0x1f
 
-#ifdef __cplusplus
-}
-#endif
-
 #undef VINT32
 #undef VINT8
 

drivers/staging/cxt1e1/ossiRelease.c

@@ -1,7 +1,3 @@
-/*
- * $Id: ossiRelease.c,v 1.2 2008/05/08 20:14:03 rdobbs PMCC4_3_1B $
- */
-
 /*-----------------------------------------------------------------------------
  * ossiRelease.c -
  *
@@ -26,14 +22,8 @@
  * One Stop Systems, Inc.  Escondido, California  U.S.A.
  *
  *-----------------------------------------------------------------------------
- * RCS info:
- * RCS revision: $Revision: 1.2 $
- * Last changed on $Date: 2008/05/08 20:14:03 $
- * Changed by $Author: rdobbs $
- *-----------------------------------------------------------------------------
  */
 
-
 char pmcc4_OSSI_release[] = "$Release: PMCC4_3_1B,  Copyright (c) 2008 One Stop Systems$";
 
 /***  End-of-File  ***/

drivers/staging/cxt1e1/pmc93x6_eeprom.h

@@ -1,7 +1,3 @@
-/*
- * $Id: pmc93x6_eeprom.h,v 1.1 2005/09/28 00:10:08 rickd PMCC4_3_1B $
- */
-
 #ifndef _INC_PMC93X6_EEPROM_H_
 #define _INC_PMC93X6_EEPROM_H_
 
@@ -23,26 +19,9 @@
  * For further information, contact via email: support@sbei.com
  * SBE, Inc.  San Ramon, California  U.S.A.
  *-----------------------------------------------------------------------------
- * RCS info:
- *-----------------------------------------------------------------------------
- * $Log: pmc93x6_eeprom.h,v $
- * Revision 1.1  2005/09/28 00:10:08  rickd
- * pmc_verify_cksum return value is char.
- *
- * Revision 1.0  2005/05/04 17:20:51  rickd
- * Initial revision
- *
- * Revision 1.0  2005/04/22 23:48:48  rickd
- * Initial revision
- *
- *-----------------------------------------------------------------------------
  */
 
-#if defined (__FreeBSD__) || defined (__NetBSD__)
-#include <sys/types.h>
-#else
 #include <linux/types.h>
-#endif
 
 #ifdef __KERNEL__
 

drivers/staging/cxt1e1/pmcc4.h

@@ -1,7 +1,3 @@
-/*
- * $Id: pmcc4.h,v 1.4 2005/11/01 19:24:48 rickd PMCC4_3_1B $
- */
-
 #ifndef _INC_PMCC4_H_
 #define _INC_PMCC4_H_
 
@@ -23,49 +19,15 @@
  * For further information, contact via email: support@sbei.com
  * SBE, Inc.  San Ramon, California  U.S.A.
  *-----------------------------------------------------------------------------
- * RCS info:
- * RCS revision: $Revision: 1.4 $
- * Last changed on $Date: 2005/11/01 19:24:48 $
- * Changed by $Author: rickd $
- *-----------------------------------------------------------------------------
- * $Log: pmcc4.h,v $
- * Revision 1.4  2005/11/01 19:24:48  rickd
- * Remove de-implement function prototypes.  Several <int> to
- * <status_t> changes for consistent usage of same.
- *
- * Revision 1.3  2005/09/28 00:10:08  rickd
- * Add GNU license info. Use config params from libsbew.h
- *
- * Revision 1.2  2005/04/28 23:43:03  rickd
- * Add RCS tracking heading.
- *
- *-----------------------------------------------------------------------------
  */
 
-
-#if defined(__FreeBSD__) || defined(__NetBSD__)
-#include <sys/types.h>
-#else
-#ifndef __KERNEL__
-#include <sys/types.h>
-#else
 #include <linux/types.h>
-#endif
-#endif
-
-
 
 typedef int status_t;
 
 #define SBE_DRVR_FAIL     0
 #define SBE_DRVR_SUCCESS  1
 
-#ifdef __cplusplus
-extern      "C"
-{
-#endif
-
-
 /********************/
 /* PMCC4 memory Map */
 /********************/
@@ -105,10 +67,6 @@ extern      "C"
 #define sbeE1errSMF    0x02
 #define sbeE1CRC       0x01
 
-#ifdef __cplusplus
-}
-#endif
-
 #ifdef __KERNEL__
 
 /*

drivers/staging/cxt1e1/pmcc4_cpld.h

@@ -1,7 +1,3 @@
-/*
- * $Id: pmcc4_cpld.h,v 1.0 2005/09/28 00:10:08 rickd PMCC4_3_1B $
- */
-
 #ifndef _INC_PMCC4_CPLD_H_
 #define _INC_PMCC4_CPLD_H_
 
@@ -23,34 +19,9 @@
  * For further information, contact via email: support@sbei.com
  * SBE, Inc.  San Ramon, California  U.S.A.
  *-----------------------------------------------------------------------------
- * RCS info:
- * RCS revision: $Revision: 1.0 $
- * Last changed on $Date: 2005/09/28 00:10:08 $
- * Changed by $Author: rickd $
- *-----------------------------------------------------------------------------
- * $Log: pmcc4_cpld.h,v $
- * Revision 1.0  2005/09/28 00:10:08  rickd
- * Initial revision
- *
- *-----------------------------------------------------------------------------
  */
 
-
-#if defined(__FreeBSD__) || defined(__NetBSD__)
-#include <sys/types.h>
-#else
-#ifndef __KERNEL__
-#include <sys/types.h>
-#else
 #include <linux/types.h>
-#endif
-#endif
-
-#ifdef __cplusplus
-extern      "C"
-{
-#endif
-
 
 /********************************/
 /* iSPLD control chip registers */
@@ -117,8 +88,4 @@ extern      "C"
 #define PMCC4_CPLD_INTR_CMT_3   0x04
 #define PMCC4_CPLD_INTR_CMT_4   0x08
 
-#ifdef __cplusplus
-}
-#endif
-
 #endif                          /* _INC_PMCC4_CPLD_H_ */

drivers/staging/cxt1e1/pmcc4_defs.h

@@ -1,7 +1,3 @@
-/*
- * $Id: pmcc4_defs.h,v 1.0 2005/09/28 00:10:09 rickd PMCC4_3_1B $
- */
-
 #ifndef _INC_PMCC4_DEFS_H_
 #define _INC_PMCC4_DEFS_H_
 
@@ -25,16 +21,6 @@
  * For further information, contact via email: support@sbei.com
  * SBE, Inc.  San Ramon, California  U.S.A.
  *-----------------------------------------------------------------------------
- * RCS info:
- * RCS revision: $Revision: 1.0 $
- * Last changed on $Date: 2005/09/28 00:10:09 $
- * Changed by $Author: rickd $
- *-----------------------------------------------------------------------------
- * $Log: pmcc4_defs.h,v $
- * Revision 1.0  2005/09/28 00:10:09  rickd
- * Initial revision
- *
- *-----------------------------------------------------------------------------
  */
 
 

drivers/staging/cxt1e1/pmcc4_drv.c

@@ -1,8 +1,3 @@
-/*
- * $Id: pmcc4_drv.c,v 3.1 2007/08/15 23:32:17 rickd PMCC4_3_1B $
- */
-
-
 /*-----------------------------------------------------------------------------
  * pmcc4_drv.c -
  *
@@ -22,74 +17,10 @@
  * For further information, contact via email: support@onestopsystems.com
  * One Stop Systems, Inc.  Escondido, California  U.S.A.
  *-----------------------------------------------------------------------------
- * RCS info:
- * RCS revision: $Revision: 3.1 $
- * Last changed on $Date: 2007/08/15 23:32:17 $
- * Changed by $Author: rickd $
- *-----------------------------------------------------------------------------
- * $Log: pmcc4_drv.c,v $
- * Revision 3.1  2007/08/15 23:32:17  rickd
- * Use 'if 0' instead of GNU comment delimeter to avoid line wrap induced compiler errors.
- *
- * Revision 3.0  2007/08/15 22:19:55  rickd
- * Correct sizeof() castings and pi->regram to support 64bit compatibility.
- *
- * Revision 2.10  2006/04/21 00:56:40  rickd
- * workqueue files now prefixed with <sbecom> prefix.
- *
- * Revision 2.9  2005/11/01 19:22:49  rickd
- * Add sanity checks against max_port for ioctl functions.
- *
- * Revision 2.8  2005/10/27 18:59:25  rickd
- * Code cleanup.  Default channel config to HDLC_FCS16.
- *
- * Revision 2.7  2005/10/18 18:16:30  rickd
- * Further NCOMM code repairs - (1) interrupt matrix usage inconsistent
- * for indexing into nciInterrupt[][], code missing double parameters.
- * (2) check input of ncomm interrupt registration cardID for correct
- * boundary values.
- *
- * Revision 2.6  2005/10/17 23:55:28  rickd
- * Initial port of NCOMM support patches from original work found
- * in pmc_c4t1e1 as updated by NCOMM.  Ref: CONFIG_SBE_PMCC4_NCOMM.
- * Corrected NCOMMs wanpmcC4T1E1_getBaseAddress() to correctly handle
- * multiple boards.
- *
- * Revision 2.5  2005/10/13 23:01:28  rickd
- * Correct panic for illegal address reference w/in get_brdinfo on
- * first_if/last_if name acquistion under Linux 2.6
- *
- * Revision 2.4  2005/10/13 21:20:19  rickd
- * Correction of c4_cleanup() wherein next should be acquired before
- * ci_t structure is free'd.
- *
- * Revision 2.3  2005/10/13 19:20:10  rickd
- * Correct driver removal cleanup code for multiple boards.
- *
- * Revision 2.2  2005/10/11 18:34:04  rickd
- * New routine added to determine number of ports (comets) on board.
- *
- * Revision 2.1  2005/10/05 00:48:13  rickd
- * Add some RX activation trace code.
- *
- * Revision 2.0  2005/09/28 00:10:06  rickd
- * Implement 2.6 workqueue for TX/RX restart.  Correction to
- * hardware register boundary checks allows expanded access of MUSYCC.
- * Implement new musycc reg&bits namings.
- *
- *-----------------------------------------------------------------------------
  */
 
-char        OSSIid_pmcc4_drvc[] =
-"@(#)pmcc4_drv.c - $Revision: 3.1 $   (c) Copyright 2002-2007 One Stop Systems, Inc.";
-
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
-#if defined (__FreeBSD__) || defined (__NetBSD__)
-#include <sys/param.h>
-#include <sys/systm.h>
-#include <sys/errno.h>
-#else
 #include <linux/types.h>
 #include "pmcc4_sysdep.h"
 #include <linux/errno.h>
@@ -98,7 +29,6 @@ char        OSSIid_pmcc4_drvc[] =
 #include <linux/timer.h>        /* include for timer */
 #include <linux/hdlc.h>
 #include <asm/io.h>
-#endif
 
 #include "sbecom_inline_linux.h"
 #include "libsbew.h"

drivers/staging/cxt1e1/pmcc4_ioctls.h

@@ -1,6 +1,3 @@
-/* RCSid: $Header: /home/rickd/projects/pmcc4/include/pmcc4_ioctls.h,v 2.0 2005/09/28 00:10:09 rickd PMCC4_3_1B $
- */
-
 #ifndef _INC_PMCC4_IOCTLS_H_
 #define _INC_PMCC4_IOCTLS_H_
 
@@ -22,19 +19,6 @@
  * For further information, contact via email: support@sbei.com
  * SBE, Inc.  San Ramon, California  U.S.A.
  *-----------------------------------------------------------------------------
- * RCS info:
- * RCS revision: $Revision: 2.0 $
- * Last changed on $Date: 2005/09/28 00:10:09 $
- * Changed by $Author: rickd $
- *-----------------------------------------------------------------------------
- * $Log: pmcc4_ioctls.h,v $
- * Revision 2.0  2005/09/28 00:10:09  rickd
- * Add GNU license info. Switch Ioctls to sbe_ioc.h usage.
- *
- * Revision 1.2  2005/04/28 23:43:03  rickd
- * Add RCS tracking heading.
- *
- *-----------------------------------------------------------------------------
  */
 
 #include "sbew_ioc.h"

drivers/staging/cxt1e1/sbe_bid.h

@@ -1,7 +1,3 @@
-/*
- * $Id: sbe_bid.h,v 1.0 2005/09/28 00:10:09 rickd PMCC4_3_1B $
- */
-
 #ifndef _INC_SBEBID_H_
 #define _INC_SBEBID_H_
 
@@ -24,16 +20,6 @@
  * SBE, Inc.  San Ramon, California  U.S.A.
  *
  *-----------------------------------------------------------------------------
- * RCS info:
- * RCS revision: $Revision: 1.0 $
- * Last changed on $Date: 2005/09/28 00:10:09 $
- * Changed by $Author: rickd $
- *-----------------------------------------------------------------------------
- * $Log: sbe_bid.h,v $
- * Revision 1.0  2005/09/28 00:10:09  rickd
- * Initial revision
- *
- *-----------------------------------------------------------------------------
  */
 
 #define SBE_BID_REG        0x00000000   /* Board ID Register */

drivers/staging/cxt1e1/sbe_promformat.h

@@ -1,7 +1,3 @@
-/*
- * $Id: sbe_promformat.h,v 2.2 2005/09/28 00:10:09 rickd PMCC4_3_1B $
- */
-
 #ifndef _INC_SBE_PROMFORMAT_H_
 #define _INC_SBE_PROMFORMAT_H_
 
@@ -24,19 +20,6 @@
  * SBE, Inc.  San Ramon, California  U.S.A.
  *
  *-----------------------------------------------------------------------------
- * RCS info:
- * RCS revision: $Revision: 2.2 $
- * Last changed on $Date: 2005/09/28 00:10:09 $
- * Changed by $Author: rickd $
- *-----------------------------------------------------------------------------
- * $Log: sbe_promformat.h,v $
- * Revision 2.2  2005/09/28 00:10:09  rickd
- * Add EEPROM sample from C4T1E1 board.
- *
- * Revision 2.1  2005/05/04 17:18:24  rickd
- * Initial CI.
- *
- *-----------------------------------------------------------------------------
  */
 
 
@@ -85,12 +68,6 @@
  *
  */
 
-#ifdef __cplusplus
-extern      "C"
-{
-#endif
-
-
 #define STRUCT_OFFSET(type, symbol)  ((long)&(((type *)0)->symbol))
 
 /*------------------------------------------------------------------------
@@ -150,8 +127,4 @@ extern      "C"
         FLD_TYPE2   fldType2;
     }           PROMFORMAT;
 
-#ifdef __cplusplus
-}
-#endif
-
 #endif                          /*** _INC_SBE_PROMFORMAT_H_ ***/

drivers/staging/cxt1e1/sbecom_inline_linux.h

@@ -1,7 +1,3 @@
-/*
- * $Id: sbecom_inline_linux.h,v 1.2 2007/08/15 22:51:35 rickd PMCC4_3_1B $
- */
-
 #ifndef _INC_SBECOM_INLNX_H_
 #define _INC_SBECOM_INLNX_H_
 
@@ -24,22 +20,6 @@
  * For further information, contact via email: support@onestopsystems.com
  * One Stop Systems, Inc.  Escondido, California  U.S.A.
  *-----------------------------------------------------------------------------
- * RCS info:
- * RCS revision: $Revision: 1.2 $
- * Last changed on $Date: 2007/08/15 22:51:35 $
- * Changed by $Author: rickd $
- *-----------------------------------------------------------------------------
- * $Log: sbecom_inline_linux.h,v $
- * Revision 1.2  2007/08/15 22:51:35  rickd
- * Remove duplicate version.h entry.
- *
- * Revision 1.1  2007/08/15 22:50:29  rickd
- * Update linux/config for 2.6.18 and later.
- *
- * Revision 1.0  2005/09/28 00:10:09  rickd
- * Initial revision
- *
- *-----------------------------------------------------------------------------
  */
 
 

drivers/staging/cxt1e1/sbeproc.h

@@ -1,7 +1,3 @@
-/*
- * $Id: sbeproc.h,v 1.2 2005/10/17 23:55:28 rickd PMCC4_3_1B $
- */
-
 #ifndef _INC_SBEPROC_H_
 #define _INC_SBEPROC_H_
 
@@ -23,22 +19,6 @@
  * For further information, contact via email: support@sbei.com
  * SBE, Inc.  San Ramon, California  U.S.A.
  *-----------------------------------------------------------------------------
- * RCS info:
- * RCS revision: $Revision: 1.2 $
- * Last changed on $Date: 2005/10/17 23:55:28 $
- * Changed by $Author: rickd $
- *-----------------------------------------------------------------------------
- * $Log: sbeproc.h,v $
- * Revision 1.2  2005/10/17 23:55:28  rickd
- * sbecom_proc_brd_init() is an declared an __init function.
- *
- * Revision 1.1  2005/09/28 00:10:09  rickd
- * Remove unneeded inclusion of c4_private.h.
- *
- * Revision 1.0  2005/05/10 22:21:46  rickd
- * Initial check-in.
- *
- *-----------------------------------------------------------------------------
  */
 
 

drivers/staging/cxt1e1/sbew_ioc.h

@@ -1,7 +1,3 @@
-/*
- * $Id: sbew_ioc.h,v 1.0 2005/09/28 00:10:10 rickd PMCC4_3_1B $
- */
-
 #ifndef _INC_SBEWIOC_H_
 #define _INC_SBEWIOC_H_
 
@@ -24,55 +20,9 @@
  * SBE, Inc.  San Ramon, California  U.S.A.
  *
  *-----------------------------------------------------------------------------
- * RCS info:
- * RCS revision: $Revision: 1.0 $
- * Last changed on $Date: 2005/09/28 00:10:10 $
- * Changed by $Author: rickd $
- *-----------------------------------------------------------------------------
- * $Log: sbew_ioc.h,v $
- * Revision 1.0  2005/09/28 00:10:10  rickd
- * Initial revision
- *
- * Revision 1.6  2005/01/11 18:41:01  rickd
- * Add BRDADDR_GET Ioctl.
- *
- * Revision 1.5  2004/09/16 18:55:59  rickd
- * Start setting up for generic framer configuration Ioctl by switch
- * from tect3_framer_param[] to sbecom_framer_param[].
- *
- * Revision 1.4  2004/06/28 17:58:15  rickd
- * Rename IOC_TSMAP_[GS] to IOC_TSIOC_[GS] to support need for
- * multiple formats of data when setting up TimeSlots.
- *
- * Revision 1.3  2004/06/22 21:18:13  rickd
- * read_vec now() ONLY handles a single common wrt_vec array.
- *
- * Revision 1.1  2004/06/10 18:11:34  rickd
- * Add IID_GET Ioctl reference.
- *
- * Revision 1.0  2004/06/08 22:59:38  rickd
- * Initial revision
- *
- * Revision 2.0  2004/06/07 17:49:47  rickd
- * Initial library release following merge of wanc1t3/wan256 into
- * common elements for lib.
- *
- *-----------------------------------------------------------------------------
  */
 
-#ifndef __KERNEL__
-#include <sys/types.h>
-#endif
-#ifdef SunOS
-#include <sys/ioccom.h>
-#else
 #include <linux/ioctl.h>
-#endif
-
-#ifdef __cplusplus
-extern      "C"
-{
-#endif
 
 #define SBE_LOCKFILE   "/tmp/.sbewan.LCK"
 
@@ -128,9 +78,4 @@ extern      "C"
 
 #define SBE_IOC_MAXVEC    1
 
-
-#ifdef __cplusplus
-}
-#endif
-
 #endif                          /*** _INC_SBEWIOC_H_ ***/

drivers/staging/frontier/tranzport.c

@@ -199,7 +199,7 @@ static void usb_tranzport_abort_transfers(struct usb_tranzport *dev)
 		struct usb_interface *intf = to_usb_interface(dev);	\
 		struct usb_tranzport *t = usb_get_intfdata(intf);	\
 		unsigned long temp;	\
-		if (strict_strtoul(buf, 10, &temp))	\
+		if (kstrtoul(buf, 10, &temp))	\
 			return -EINVAL;	\
 		t->value = temp;	\
 		return count;	\

drivers/staging/gma500/Kconfig

@@ -1,6 +1,6 @@
 config DRM_PSB
 	tristate "Intel GMA5/600 KMS Framebuffer"
-	depends on DRM && PCI && X86
+	depends on DRM && PCI && X86 && BROKEN
 	select FB_CFB_COPYAREA
         select FB_CFB_FILLRECT
         select FB_CFB_IMAGEBLIT

drivers/staging/hv/Kconfig

@@ -3,15 +3,3 @@ config HYPERV_STORAGE
 	depends on HYPERV && SCSI
 	help
 	 Select this option to enable the Hyper-V virtual storage driver.
-
-config HYPERV_NET
-	tristate "Microsoft Hyper-V virtual network driver"
-	depends on HYPERV && NET
-	help
-	  Select this option to enable the Hyper-V virtual network driver.
-
-config HYPERV_MOUSE
-	tristate "Microsoft Hyper-V mouse driver"
-	depends on HYPERV && HID
-	help
-	  Select this option to enable the Hyper-V mouse driver.

drivers/staging/hv/Makefile

@@ -1,6 +1,3 @@
 obj-$(CONFIG_HYPERV_STORAGE)	+= hv_storvsc.o
-obj-$(CONFIG_HYPERV_NET)	+= hv_netvsc.o
-obj-$(CONFIG_HYPERV_MOUSE)	+= hv_mouse.o
 
 hv_storvsc-y := storvsc_drv.o
-hv_netvsc-y := netvsc_drv.o netvsc.o rndis_filter.o

drivers/staging/hv/TODO

@@ -1,7 +1,5 @@
 TODO:
-	- audit the network driver
 	- audit the scsi driver
 
 Please send patches for this code to Greg Kroah-Hartman <gregkh@suse.de>,
-Hank Janssen <hjanssen@microsoft.com>, Haiyang Zhang <haiyangz@microsoft.com>,
-K. Y. Srinivasan <kys@microsoft.com>
+Haiyang Zhang <haiyangz@microsoft.com>, and K. Y. Srinivasan <kys@microsoft.com>