From 40d5cb207e69718ef25f4463c53a1332d7663ce8 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Mon, 11 Jan 2016 22:57:58 -0600 Subject: [PATCH] ARM: dts: LogicPD Torpedo: Add SPI EEPROM The devkit has an AT25 EEPROM on MCSPI1. Enable this with default parameters. Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts | 14 ++++++++++++++ arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 14 ++++++++++++++ 2 files changed, 28 insertions(+) diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index f926eaa990d6..703ced2adcca 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -341,6 +341,20 @@ touchscreen: tsc2004@48 { }; }; +&mcspi1 { + at25@0 { + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha; + spi-cpol; + + pagesize = <64>; + size = <32768>; + address-width = <16>; + }; +}; + &isp { pinctrl-names = "default"; pinctrl-0 = <&isp_pins>; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 2e4fe3f182c2..8b157bedf570 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -179,6 +179,15 @@ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* GPIO_162,BT_EN */ >; }; + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + }; &uart2 { @@ -187,6 +196,11 @@ &uart2 { pinctrl-0 = <&uart2_pins>; }; +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; +}; + &omap3_pmx_core2 { mmc3_core2_pins: pinmux_mmc3_core2_pins { pinctrl-single,pins = <