mirror of https://gitee.com/openkylin/linux.git
Input: sx8654 - add sx8650 support
The sx8654 and sx8650 are quite similar, therefore add support for the sx8650 within the sx8654 driver. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Rob Herring <robh@kernel.org> [dtor: use __be16 in sx8650_irq, add missing del_timer_sync] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This commit is contained in:
parent
5896756a70
commit
43df039c6d
|
@ -2,6 +2,7 @@
|
|||
|
||||
Required properties:
|
||||
- compatible: must be one of the following, depending on the model:
|
||||
"semtech,sx8650"
|
||||
"semtech,sx8654"
|
||||
"semtech,sx8655"
|
||||
"semtech,sx8656"
|
||||
|
|
|
@ -44,9 +44,11 @@
|
|||
#define I2C_REG_IRQSRC 0x23
|
||||
#define I2C_REG_SOFTRESET 0x3f
|
||||
|
||||
#define I2C_REG_SX8650_STAT 0x05
|
||||
#define SX8650_STAT_CONVIRQ 0x80
|
||||
|
||||
/* commands */
|
||||
#define CMD_READ_REGISTER 0x40
|
||||
#define CMD_MANUAL 0xc0
|
||||
#define CMD_PENTRG 0xe0
|
||||
|
||||
/* value for I2C_REG_SOFTRESET */
|
||||
|
@ -58,6 +60,7 @@
|
|||
|
||||
/* bits for RegTouch1 */
|
||||
#define CONDIRQ 0x20
|
||||
#define RPDNT_100K 0x00
|
||||
#define FILT_7SA 0x03
|
||||
|
||||
/* bits for I2C_REG_CHANMASK */
|
||||
|
@ -71,14 +74,121 @@
|
|||
/* power delay: lower nibble of CTRL0 register */
|
||||
#define POWDLY_1_1MS 0x0b
|
||||
|
||||
/* for sx8650, as we have no pen release IRQ there: timeout in ns following the
|
||||
* last PENIRQ after which we assume the pen is lifted.
|
||||
*/
|
||||
#define SX8650_PENIRQ_TIMEOUT msecs_to_jiffies(10)
|
||||
|
||||
#define MAX_12BIT ((1 << 12) - 1)
|
||||
#define MAX_I2C_READ_LEN 10 /* see datasheet section 5.1.5 */
|
||||
|
||||
/* channel definition */
|
||||
#define CH_X 0x00
|
||||
#define CH_Y 0x01
|
||||
|
||||
struct sx865x_data {
|
||||
u8 cmd_manual;
|
||||
u8 chan_mask;
|
||||
bool has_irq_penrelease;
|
||||
bool has_reg_irqmask;
|
||||
irq_handler_t irqh;
|
||||
};
|
||||
|
||||
struct sx8654 {
|
||||
struct input_dev *input;
|
||||
struct i2c_client *client;
|
||||
struct gpio_desc *gpio_reset;
|
||||
|
||||
spinlock_t lock; /* for input reporting from irq/timer */
|
||||
struct timer_list timer;
|
||||
|
||||
const struct sx865x_data *data;
|
||||
};
|
||||
|
||||
static inline void sx865x_penrelease(struct sx8654 *ts)
|
||||
{
|
||||
struct input_dev *input_dev = ts->input;
|
||||
|
||||
input_report_key(input_dev, BTN_TOUCH, 0);
|
||||
input_sync(input_dev);
|
||||
}
|
||||
|
||||
static void sx865x_penrelease_timer_handler(struct timer_list *t)
|
||||
{
|
||||
struct sx8654 *ts = from_timer(ts, t, timer);
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&ts->lock, flags);
|
||||
sx865x_penrelease(ts);
|
||||
spin_unlock_irqrestore(&ts->lock, flags);
|
||||
dev_dbg(&ts->client->dev, "penrelease by timer\n");
|
||||
}
|
||||
|
||||
static irqreturn_t sx8650_irq(int irq, void *handle)
|
||||
{
|
||||
struct sx8654 *ts = handle;
|
||||
struct device *dev = &ts->client->dev;
|
||||
int len, i;
|
||||
unsigned long flags;
|
||||
u8 stat;
|
||||
u16 x, y;
|
||||
u16 ch;
|
||||
u16 chdata;
|
||||
__be16 data[MAX_I2C_READ_LEN / sizeof(__be16)];
|
||||
u8 nchan = hweight32(ts->data->chan_mask);
|
||||
u8 readlen = nchan * sizeof(*data);
|
||||
|
||||
stat = i2c_smbus_read_byte_data(ts->client, CMD_READ_REGISTER
|
||||
| I2C_REG_SX8650_STAT);
|
||||
|
||||
if (!(stat & SX8650_STAT_CONVIRQ)) {
|
||||
dev_dbg(dev, "%s ignore stat [0x%02x]", __func__, stat);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
len = i2c_master_recv(ts->client, (u8 *)data, readlen);
|
||||
if (len != readlen) {
|
||||
dev_dbg(dev, "ignore short recv (%d)\n", len);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
spin_lock_irqsave(&ts->lock, flags);
|
||||
|
||||
x = 0;
|
||||
y = 0;
|
||||
for (i = 0; i < nchan; i++) {
|
||||
chdata = be16_to_cpu(data[i]);
|
||||
|
||||
if (unlikely(chdata == 0xFFFF)) {
|
||||
dev_dbg(dev, "invalid qualified data @ %d\n", i);
|
||||
continue;
|
||||
} else if (unlikely(chdata & 0x8000)) {
|
||||
dev_warn(dev, "hibit @ %d [0x%04x]\n", i, chdata);
|
||||
continue;
|
||||
}
|
||||
|
||||
ch = chdata >> 12;
|
||||
if (ch == CH_X)
|
||||
x = chdata & MAX_12BIT;
|
||||
else if (ch == CH_Y)
|
||||
y = chdata & MAX_12BIT;
|
||||
else
|
||||
dev_warn(dev, "unknown channel %d [0x%04x]\n", ch,
|
||||
chdata);
|
||||
}
|
||||
|
||||
input_report_abs(ts->input, ABS_X, x);
|
||||
input_report_abs(ts->input, ABS_Y, y);
|
||||
input_report_key(ts->input, BTN_TOUCH, 1);
|
||||
input_sync(ts->input);
|
||||
dev_dbg(dev, "point(%4d,%4d)\n", x, y);
|
||||
|
||||
mod_timer(&ts->timer, jiffies + SX8650_PENIRQ_TIMEOUT);
|
||||
spin_unlock_irqrestore(&ts->lock, flags);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static irqreturn_t sx8654_irq(int irq, void *handle)
|
||||
{
|
||||
struct sx8654 *sx8654 = handle;
|
||||
|
@ -179,14 +289,17 @@ static void sx8654_close(struct input_dev *dev)
|
|||
|
||||
disable_irq(client->irq);
|
||||
|
||||
if (!sx8654->data->has_irq_penrelease)
|
||||
del_timer_sync(&sx8654->timer);
|
||||
|
||||
/* enable manual mode mode */
|
||||
error = i2c_smbus_write_byte(client, CMD_MANUAL);
|
||||
error = i2c_smbus_write_byte(client, sx8654->data->cmd_manual);
|
||||
if (error) {
|
||||
dev_err(&client->dev, "writing command CMD_MANUAL failed");
|
||||
return;
|
||||
}
|
||||
|
||||
error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, 0);
|
||||
error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, RATE_MANUAL);
|
||||
if (error) {
|
||||
dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
|
||||
return;
|
||||
|
@ -219,6 +332,20 @@ static int sx8654_probe(struct i2c_client *client,
|
|||
}
|
||||
dev_dbg(&client->dev, "got GPIO reset pin\n");
|
||||
|
||||
sx8654->data = device_get_match_data(&client->dev);
|
||||
if (!sx8654->data)
|
||||
sx8654->data = (const struct sx865x_data *)id->driver_data;
|
||||
if (!sx8654->data) {
|
||||
dev_err(&client->dev, "invalid or missing device data\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (!sx8654->data->has_irq_penrelease) {
|
||||
dev_dbg(&client->dev, "use timer for penrelease\n");
|
||||
timer_setup(&sx8654->timer, sx865x_penrelease_timer_handler, 0);
|
||||
spin_lock_init(&sx8654->lock);
|
||||
}
|
||||
|
||||
input = devm_input_allocate_device(&client->dev);
|
||||
if (!input)
|
||||
return -ENOMEM;
|
||||
|
@ -246,29 +373,31 @@ static int sx8654_probe(struct i2c_client *client,
|
|||
}
|
||||
|
||||
error = i2c_smbus_write_byte_data(client, I2C_REG_CHANMASK,
|
||||
CONV_X | CONV_Y);
|
||||
sx8654->data->chan_mask);
|
||||
if (error) {
|
||||
dev_err(&client->dev, "writing to I2C_REG_CHANMASK failed");
|
||||
return error;
|
||||
}
|
||||
|
||||
error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK,
|
||||
IRQ_PENTOUCH_TOUCHCONVDONE |
|
||||
IRQ_PENRELEASE);
|
||||
if (error) {
|
||||
dev_err(&client->dev, "writing to I2C_REG_IRQMASK failed");
|
||||
return error;
|
||||
if (sx8654->data->has_reg_irqmask) {
|
||||
error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK,
|
||||
IRQ_PENTOUCH_TOUCHCONVDONE |
|
||||
IRQ_PENRELEASE);
|
||||
if (error) {
|
||||
dev_err(&client->dev, "writing I2C_REG_IRQMASK failed");
|
||||
return error;
|
||||
}
|
||||
}
|
||||
|
||||
error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH1,
|
||||
CONDIRQ | FILT_7SA);
|
||||
CONDIRQ | RPDNT_100K | FILT_7SA);
|
||||
if (error) {
|
||||
dev_err(&client->dev, "writing to I2C_REG_TOUCH1 failed");
|
||||
return error;
|
||||
}
|
||||
|
||||
error = devm_request_threaded_irq(&client->dev, client->irq,
|
||||
NULL, sx8654_irq,
|
||||
NULL, sx8654->data->irqh,
|
||||
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
||||
client->name, sx8654);
|
||||
if (error) {
|
||||
|
@ -288,21 +417,48 @@ static int sx8654_probe(struct i2c_client *client,
|
|||
return 0;
|
||||
}
|
||||
|
||||
static const struct sx865x_data sx8650_data = {
|
||||
.cmd_manual = 0xb0,
|
||||
.has_irq_penrelease = false,
|
||||
.has_reg_irqmask = false,
|
||||
.chan_mask = (CONV_X | CONV_Y),
|
||||
.irqh = sx8650_irq,
|
||||
};
|
||||
|
||||
static const struct sx865x_data sx8654_data = {
|
||||
.cmd_manual = 0xc0,
|
||||
.has_irq_penrelease = true,
|
||||
.has_reg_irqmask = true,
|
||||
.chan_mask = (CONV_X | CONV_Y),
|
||||
.irqh = sx8654_irq,
|
||||
};
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static const struct of_device_id sx8654_of_match[] = {
|
||||
{ .compatible = "semtech,sx8654", },
|
||||
{ .compatible = "semtech,sx8655", },
|
||||
{ .compatible = "semtech,sx8656", },
|
||||
{ },
|
||||
{
|
||||
.compatible = "semtech,sx8650",
|
||||
.data = &sx8650_data,
|
||||
}, {
|
||||
.compatible = "semtech,sx8654",
|
||||
.data = &sx8654_data,
|
||||
}, {
|
||||
.compatible = "semtech,sx8655",
|
||||
.data = &sx8654_data,
|
||||
}, {
|
||||
.compatible = "semtech,sx8656",
|
||||
.data = &sx8654_data,
|
||||
},
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, sx8654_of_match);
|
||||
#endif
|
||||
|
||||
static const struct i2c_device_id sx8654_id_table[] = {
|
||||
{ "semtech_sx8654", 0 },
|
||||
{ "semtech_sx8655", 0 },
|
||||
{ "semtech_sx8656", 0 },
|
||||
{ },
|
||||
{ .name = "semtech_sx8650", .driver_data = (long)&sx8650_data },
|
||||
{ .name = "semtech_sx8654", .driver_data = (long)&sx8654_data },
|
||||
{ .name = "semtech_sx8655", .driver_data = (long)&sx8654_data },
|
||||
{ .name = "semtech_sx8656", .driver_data = (long)&sx8654_data },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, sx8654_id_table);
|
||||
|
||||
|
|
Loading…
Reference in New Issue