From 4406d36dfdf1fbd954400e16ffeb915c1907d58a Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Mon, 20 Apr 2020 20:21:13 +0200 Subject: [PATCH] net: phy: bcm54140: add hwmon support The PHY supports monitoring its die temperature as well as two analog voltages. Add support for it. Signed-off-by: Michael Walle Acked-by: Guenter Roeck Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- Documentation/hwmon/bcm54140.rst | 45 ++++ Documentation/hwmon/index.rst | 1 + drivers/net/phy/Kconfig | 1 + drivers/net/phy/bcm54140.c | 396 +++++++++++++++++++++++++++++++ 4 files changed, 443 insertions(+) create mode 100644 Documentation/hwmon/bcm54140.rst diff --git a/Documentation/hwmon/bcm54140.rst b/Documentation/hwmon/bcm54140.rst new file mode 100644 index 000000000000..bc6ea4b45966 --- /dev/null +++ b/Documentation/hwmon/bcm54140.rst @@ -0,0 +1,45 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +Broadcom BCM54140 Quad SGMII/QSGMII PHY +======================================= + +Supported chips: + + * Broadcom BCM54140 + + Datasheet: not public + +Author: Michael Walle + +Description +----------- + +The Broadcom BCM54140 is a Quad SGMII/QSGMII PHY which supports monitoring +its die temperature as well as two analog voltages. + +The AVDDL is a 1.0V analogue voltage, the AVDDH is a 3.3V analogue voltage. +Both voltages and the temperature are measured in a round-robin fashion. + +Sysfs entries +------------- + +The following attributes are supported. + +======================= ======================================================== +in0_label "AVDDL" +in0_input Measured AVDDL voltage. +in0_min Minimum AVDDL voltage. +in0_max Maximum AVDDL voltage. +in0_alarm AVDDL voltage alarm. + +in1_label "AVDDH" +in1_input Measured AVDDH voltage. +in1_min Minimum AVDDH voltage. +in1_max Maximum AVDDH voltage. +in1_alarm AVDDH voltage alarm. + +temp1_input Die temperature. +temp1_min Minimum die temperature. +temp1_max Maximum die temperature. +temp1_alarm Die temperature alarm. +======================= ======================================================== diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 8ef62fd39787..1f0affb3b6e0 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -42,6 +42,7 @@ Hardware Monitoring Kernel Drivers asb100 asc7621 aspeed-pwm-tacho + bcm54140 bel-pfe coretemp da9052 diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index cb7936b577de..bacfee41b564 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -349,6 +349,7 @@ config BROADCOM_PHY config BCM54140_PHY tristate "Broadcom BCM54140 PHY" depends on PHYLIB + depends on HWMON || HWMON=n select BCM_NET_PHYLIB help Support the Broadcom BCM54140 Quad SGMII/QSGMII PHY. diff --git a/drivers/net/phy/bcm54140.c b/drivers/net/phy/bcm54140.c index 0eeb60de67f8..aa854477e06a 100644 --- a/drivers/net/phy/bcm54140.c +++ b/drivers/net/phy/bcm54140.c @@ -6,6 +6,7 @@ #include #include +#include #include #include @@ -50,6 +51,69 @@ #define BCM54140_RDB_TOP_IMR_PORT1 BIT(5) #define BCM54140_RDB_TOP_IMR_PORT2 BIT(6) #define BCM54140_RDB_TOP_IMR_PORT3 BIT(7) +#define BCM54140_RDB_MON_CTRL 0x831 /* monitor control */ +#define BCM54140_RDB_MON_CTRL_V_MODE BIT(3) /* voltage mode */ +#define BCM54140_RDB_MON_CTRL_SEL_MASK GENMASK(2, 1) +#define BCM54140_RDB_MON_CTRL_SEL_TEMP 0 /* meassure temperature */ +#define BCM54140_RDB_MON_CTRL_SEL_1V0 1 /* meassure AVDDL 1.0V */ +#define BCM54140_RDB_MON_CTRL_SEL_3V3 2 /* meassure AVDDH 3.3V */ +#define BCM54140_RDB_MON_CTRL_SEL_RR 3 /* meassure all round-robin */ +#define BCM54140_RDB_MON_CTRL_PWR_DOWN BIT(0) /* power-down monitor */ +#define BCM54140_RDB_MON_TEMP_VAL 0x832 /* temperature value */ +#define BCM54140_RDB_MON_TEMP_MAX 0x833 /* temperature high thresh */ +#define BCM54140_RDB_MON_TEMP_MIN 0x834 /* temperature low thresh */ +#define BCM54140_RDB_MON_TEMP_DATA_MASK GENMASK(9, 0) +#define BCM54140_RDB_MON_1V0_VAL 0x835 /* AVDDL 1.0V value */ +#define BCM54140_RDB_MON_1V0_MAX 0x836 /* AVDDL 1.0V high thresh */ +#define BCM54140_RDB_MON_1V0_MIN 0x837 /* AVDDL 1.0V low thresh */ +#define BCM54140_RDB_MON_1V0_DATA_MASK GENMASK(10, 0) +#define BCM54140_RDB_MON_3V3_VAL 0x838 /* AVDDH 3.3V value */ +#define BCM54140_RDB_MON_3V3_MAX 0x839 /* AVDDH 3.3V high thresh */ +#define BCM54140_RDB_MON_3V3_MIN 0x83a /* AVDDH 3.3V low thresh */ +#define BCM54140_RDB_MON_3V3_DATA_MASK GENMASK(11, 0) +#define BCM54140_RDB_MON_ISR 0x83b /* interrupt status */ +#define BCM54140_RDB_MON_ISR_3V3 BIT(2) /* AVDDH 3.3V alarm */ +#define BCM54140_RDB_MON_ISR_1V0 BIT(1) /* AVDDL 1.0V alarm */ +#define BCM54140_RDB_MON_ISR_TEMP BIT(0) /* temperature alarm */ + +/* According to the datasheet the formula is: + * T = 413.35 - (0.49055 * bits[9:0]) + */ +#define BCM54140_HWMON_TO_TEMP(v) (413350L - (v) * 491) +#define BCM54140_HWMON_FROM_TEMP(v) DIV_ROUND_CLOSEST_ULL(413350L - (v), 491) + +/* According to the datasheet the formula is: + * U = bits[11:0] / 1024 * 220 / 0.2 + * + * Normalized: + * U = bits[11:0] / 4096 * 2514 + */ +#define BCM54140_HWMON_TO_IN_1V0(v) ((v) * 2514 >> 11) +#define BCM54140_HWMON_FROM_IN_1V0(v) DIV_ROUND_CLOSEST_ULL(((v) << 11), 2514) + +/* According to the datasheet the formula is: + * U = bits[10:0] / 1024 * 880 / 0.7 + * + * Normalized: + * U = bits[10:0] / 2048 * 4400 + */ +#define BCM54140_HWMON_TO_IN_3V3(v) ((v) * 4400 >> 12) +#define BCM54140_HWMON_FROM_IN_3V3(v) DIV_ROUND_CLOSEST_ULL(((v) << 12), 4400) + +#define BCM54140_HWMON_TO_IN(ch, v) ((ch) ? BCM54140_HWMON_TO_IN_3V3(v) \ + : BCM54140_HWMON_TO_IN_1V0(v)) +#define BCM54140_HWMON_FROM_IN(ch, v) ((ch) ? BCM54140_HWMON_FROM_IN_3V3(v) \ + : BCM54140_HWMON_FROM_IN_1V0(v)) +#define BCM54140_HWMON_IN_MASK(ch) ((ch) ? BCM54140_RDB_MON_3V3_DATA_MASK \ + : BCM54140_RDB_MON_1V0_DATA_MASK) +#define BCM54140_HWMON_IN_VAL_REG(ch) ((ch) ? BCM54140_RDB_MON_3V3_VAL \ + : BCM54140_RDB_MON_1V0_VAL) +#define BCM54140_HWMON_IN_MIN_REG(ch) ((ch) ? BCM54140_RDB_MON_3V3_MIN \ + : BCM54140_RDB_MON_1V0_MIN) +#define BCM54140_HWMON_IN_MAX_REG(ch) ((ch) ? BCM54140_RDB_MON_3V3_MAX \ + : BCM54140_RDB_MON_1V0_MAX) +#define BCM54140_HWMON_IN_ALARM_BIT(ch) ((ch) ? BCM54140_RDB_MON_ISR_3V3 \ + : BCM54140_RDB_MON_ISR_1V0) #define BCM54140_DEFAULT_DOWNSHIFT 5 #define BCM54140_MAX_DOWNSHIFT 9 @@ -57,8 +121,328 @@ struct bcm54140_priv { int port; int base_addr; +#if IS_ENABLED(CONFIG_HWMON) + bool pkg_init; + /* protect the alarm bits */ + struct mutex alarm_lock; + u16 alarm; +#endif }; +#if IS_ENABLED(CONFIG_HWMON) +static umode_t bcm54140_hwmon_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_in: + switch (attr) { + case hwmon_in_min: + case hwmon_in_max: + return 0644; + case hwmon_in_label: + case hwmon_in_input: + case hwmon_in_alarm: + return 0444; + default: + return 0; + } + case hwmon_temp: + switch (attr) { + case hwmon_temp_min: + case hwmon_temp_max: + return 0644; + case hwmon_temp_input: + case hwmon_temp_alarm: + return 0444; + default: + return 0; + } + default: + return 0; + } +} + +static int bcm54140_hwmon_read_alarm(struct device *dev, unsigned int bit, + long *val) +{ + struct phy_device *phydev = dev_get_drvdata(dev); + struct bcm54140_priv *priv = phydev->priv; + int tmp, ret = 0; + + mutex_lock(&priv->alarm_lock); + + /* latch any alarm bits */ + tmp = bcm_phy_read_rdb(phydev, BCM54140_RDB_MON_ISR); + if (tmp < 0) { + ret = tmp; + goto out; + } + priv->alarm |= tmp; + + *val = !!(priv->alarm & bit); + priv->alarm &= ~bit; + +out: + mutex_unlock(&priv->alarm_lock); + return ret; +} + +static int bcm54140_hwmon_read_temp(struct device *dev, u32 attr, long *val) +{ + struct phy_device *phydev = dev_get_drvdata(dev); + u16 reg, tmp; + + switch (attr) { + case hwmon_temp_input: + reg = BCM54140_RDB_MON_TEMP_VAL; + break; + case hwmon_temp_min: + reg = BCM54140_RDB_MON_TEMP_MIN; + break; + case hwmon_temp_max: + reg = BCM54140_RDB_MON_TEMP_MAX; + break; + case hwmon_temp_alarm: + return bcm54140_hwmon_read_alarm(dev, + BCM54140_RDB_MON_ISR_TEMP, + val); + default: + return -EOPNOTSUPP; + } + + tmp = bcm_phy_read_rdb(phydev, reg); + if (tmp < 0) + return tmp; + + *val = BCM54140_HWMON_TO_TEMP(tmp & BCM54140_RDB_MON_TEMP_DATA_MASK); + + return 0; +} + +static int bcm54140_hwmon_read_in(struct device *dev, u32 attr, + int channel, long *val) +{ + struct phy_device *phydev = dev_get_drvdata(dev); + u16 bit, reg, tmp; + + switch (attr) { + case hwmon_in_input: + reg = BCM54140_HWMON_IN_VAL_REG(channel); + break; + case hwmon_in_min: + reg = BCM54140_HWMON_IN_MIN_REG(channel); + break; + case hwmon_in_max: + reg = BCM54140_HWMON_IN_MAX_REG(channel); + break; + case hwmon_in_alarm: + bit = BCM54140_HWMON_IN_ALARM_BIT(channel); + return bcm54140_hwmon_read_alarm(dev, bit, val); + default: + return -EOPNOTSUPP; + } + + tmp = bcm_phy_read_rdb(phydev, reg); + if (tmp < 0) + return tmp; + + tmp &= BCM54140_HWMON_IN_MASK(channel); + *val = BCM54140_HWMON_TO_IN(channel, tmp); + + return 0; +} + +static int bcm54140_hwmon_read(struct device *dev, + enum hwmon_sensor_types type, u32 attr, + int channel, long *val) +{ + switch (type) { + case hwmon_temp: + return bcm54140_hwmon_read_temp(dev, attr, val); + case hwmon_in: + return bcm54140_hwmon_read_in(dev, attr, channel, val); + default: + return -EOPNOTSUPP; + } +} + +static const char *const bcm54140_hwmon_in_labels[] = { + "AVDDL", + "AVDDH", +}; + +static int bcm54140_hwmon_read_string(struct device *dev, + enum hwmon_sensor_types type, u32 attr, + int channel, const char **str) +{ + switch (type) { + case hwmon_in: + switch (attr) { + case hwmon_in_label: + *str = bcm54140_hwmon_in_labels[channel]; + return 0; + default: + return -EOPNOTSUPP; + } + default: + return -EOPNOTSUPP; + } +} + +static int bcm54140_hwmon_write_temp(struct device *dev, u32 attr, + int channel, long val) +{ + struct phy_device *phydev = dev_get_drvdata(dev); + u16 mask = BCM54140_RDB_MON_TEMP_DATA_MASK; + u16 reg; + + val = clamp_val(val, BCM54140_HWMON_TO_TEMP(mask), + BCM54140_HWMON_TO_TEMP(0)); + + switch (attr) { + case hwmon_temp_min: + reg = BCM54140_RDB_MON_TEMP_MIN; + break; + case hwmon_temp_max: + reg = BCM54140_RDB_MON_TEMP_MAX; + break; + default: + return -EOPNOTSUPP; + } + + return bcm_phy_modify_rdb(phydev, reg, mask, + BCM54140_HWMON_FROM_TEMP(val)); +} + +static int bcm54140_hwmon_write_in(struct device *dev, u32 attr, + int channel, long val) +{ + struct phy_device *phydev = dev_get_drvdata(dev); + u16 mask = BCM54140_HWMON_IN_MASK(channel); + u16 reg; + + val = clamp_val(val, 0, BCM54140_HWMON_TO_IN(channel, mask)); + + switch (attr) { + case hwmon_in_min: + reg = BCM54140_HWMON_IN_MIN_REG(channel); + break; + case hwmon_in_max: + reg = BCM54140_HWMON_IN_MAX_REG(channel); + break; + default: + return -EOPNOTSUPP; + } + + return bcm_phy_modify_rdb(phydev, reg, mask, + BCM54140_HWMON_FROM_IN(channel, val)); +} + +static int bcm54140_hwmon_write(struct device *dev, + enum hwmon_sensor_types type, u32 attr, + int channel, long val) +{ + switch (type) { + case hwmon_temp: + return bcm54140_hwmon_write_temp(dev, attr, channel, val); + case hwmon_in: + return bcm54140_hwmon_write_in(dev, attr, channel, val); + default: + return -EOPNOTSUPP; + } +} + +static const struct hwmon_channel_info *bcm54140_hwmon_info[] = { + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | + HWMON_T_ALARM), + HWMON_CHANNEL_INFO(in, + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | + HWMON_I_ALARM | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | + HWMON_I_ALARM | HWMON_I_LABEL), + NULL +}; + +static const struct hwmon_ops bcm54140_hwmon_ops = { + .is_visible = bcm54140_hwmon_is_visible, + .read = bcm54140_hwmon_read, + .read_string = bcm54140_hwmon_read_string, + .write = bcm54140_hwmon_write, +}; + +static const struct hwmon_chip_info bcm54140_chip_info = { + .ops = &bcm54140_hwmon_ops, + .info = bcm54140_hwmon_info, +}; + +static int bcm54140_enable_monitoring(struct phy_device *phydev) +{ + u16 mask, set; + + /* 3.3V voltage mode */ + set = BCM54140_RDB_MON_CTRL_V_MODE; + + /* select round-robin */ + mask = BCM54140_RDB_MON_CTRL_SEL_MASK; + set |= FIELD_PREP(BCM54140_RDB_MON_CTRL_SEL_MASK, + BCM54140_RDB_MON_CTRL_SEL_RR); + + /* remove power-down bit */ + mask |= BCM54140_RDB_MON_CTRL_PWR_DOWN; + + return bcm_phy_modify_rdb(phydev, BCM54140_RDB_MON_CTRL, mask, set); +} + +/* Check if one PHY has already done the init of the parts common to all PHYs + * in the Quad PHY package. + */ +static bool bcm54140_is_pkg_init(struct phy_device *phydev) +{ + struct bcm54140_priv *priv = phydev->priv; + struct mii_bus *bus = phydev->mdio.bus; + int base_addr = priv->base_addr; + struct phy_device *phy; + int i; + + /* Quad PHY */ + for (i = 0; i < 4; i++) { + phy = mdiobus_get_phy(bus, base_addr + i); + if (!phy) + continue; + + if ((phy->phy_id & phydev->drv->phy_id_mask) != + (phydev->drv->phy_id & phydev->drv->phy_id_mask)) + continue; + + priv = phy->priv; + + if (priv && priv->pkg_init) + return true; + } + + return false; +} + +static int bcm54140_probe_once(struct phy_device *phydev) +{ + struct device *hwmon; + int ret; + + /* enable hardware monitoring */ + ret = bcm54140_enable_monitoring(phydev); + if (ret) + return ret; + + hwmon = devm_hwmon_device_register_with_info(&phydev->mdio.dev, + "BCM54140", phydev, + &bcm54140_chip_info, + NULL); + return PTR_ERR_OR_ZERO(hwmon); +} +#endif + static int bcm54140_base_read_rdb(struct phy_device *phydev, u16 rdb) { struct bcm54140_priv *priv = phydev->priv; @@ -222,6 +606,18 @@ static int bcm54140_probe(struct phy_device *phydev) if (ret) return ret; +#if IS_ENABLED(CONFIG_HWMON) + mutex_init(&priv->alarm_lock); + + if (!bcm54140_is_pkg_init(phydev)) { + ret = bcm54140_probe_once(phydev); + if (ret) + return ret; + } + + priv->pkg_init = true; +#endif + phydev_dbg(phydev, "probed (port %d, base PHY address %d)\n", priv->port, priv->base_addr);