mirror of https://gitee.com/openkylin/linux.git
Devicetree updates for v5.9:
- Improve device links cycle detection and breaking. Add more bindings for device link dependencies. - Refactor parsing 'no-map' in __reserved_mem_alloc_size() - Improve DT unittest 'ranges' and 'dma-ranges' test case to check differing cell sizes - Various http to https link conversions - Add a schema check to prevent 'syscon' from being used by itself without a more specific compatible - A bunch more DT binding conversions to schema -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAl8pjPoQHHJvYmhAa2Vy bmVsLm9yZwAKCRD6+121jbxhw33aD/48a9wymbzf0r6mpXJyzO5zspcvcDgT7/si Eeucbp7diRX3Ei0YkfvQH3s7bEA7JM2DlPDmXBieWZqpXS9tvbX9P6VxId6bfTiI oSg/e4NNqxtHpaf4Nn6EwFFILbbi10LKvwodYDy9agePApc+wJWLI2WwlvdEsSsF vv9nnF23NdJnSjsEXwiAB+ouX8EilqB80+s9W/TUaA/RS+xEOinAkXab4qjCvTlH yUHpqe/mXDd6c4gb0EsIuAPkG7GE9/pc39iwxQ7IWz/qnSSfExjEac8j0QU4zD8u zD2EkIQMEZR7IDsQOOkEQ4gbbzl3SjrMlQSZp/VWcjcn9uVrE5VPddH/NMdb8L7m m5pgH1TFheYBPaqRIVuzrRcfW7KVjjeUuoG7xfDQy+ELWmHAMlb3uyH2CNDqmgYM ESEQgSH5w4cabP5qeXvXyZci3Zbajw2Dd555gWNC2ot6yPToJEXkesnrcpuwZZV5 Wyn5IOAuf7rri4TEpl5CsR6iJnAJsNnN+23gMaemxz2qDgBCBhY7CSoRVeP7Xxpw ymCIna6p7i/ufiP4QauTTafw03AMZz6Le8iujIaN3dmq8SbQc7BYeFNwFNjs+lyO B1gvJOt3xTXTdfqqQWpEQMg659IGguOu6MGecxN+nteTBYqQ3Ol77zNn+a0n4BA7 +rGqybfiFg== =6f3o -----END PGP SIGNATURE----- Merge tag 'devicetree-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - Improve device links cycle detection and breaking. Add more bindings for device link dependencies. - Refactor parsing 'no-map' in __reserved_mem_alloc_size() - Improve DT unittest 'ranges' and 'dma-ranges' test case to check differing cell sizes - Various http to https link conversions - Add a schema check to prevent 'syscon' from being used by itself without a more specific compatible - A bunch more DT binding conversions to schema * tag 'devicetree-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) of: reserved-memory: remove duplicated call to of_get_flat_dt_prop() for no-map node of: unittest: Use bigger address cells to catch parser regressions dt-bindings: memory-controllers: Convert mmdc to json-schema dt-bindings: mtd: Convert imx nand to json-schema dt-bindings: mtd: Convert gpmi nand to json-schema dt-bindings: iio: io-channel-mux: Fix compatible string in example code of: property: Add device link support for pinctrl-0 through pinctrl-8 of: property: Add device link support for multiple DT bindings dt-bindings: phy: ti: phy-gmii-sel: convert bindings to json-schema dt-bindings: mux: mux.h: drop a duplicated word dt-bindings: misc: Convert olpc,xo1.75-ec to json-schema dt-bindings: aspeed-lpc: Replace HTTP links with HTTPS ones dt-bindings: drm/bridge: Replace HTTP links with HTTPS ones drm/tilcdc: Replace HTTP links with HTTPS ones dt-bindings: iommu: renesas,ipmmu-vmsa: Add r8a774e1 support dt-bindings: fpga: Replace HTTP links with HTTPS ones dt-bindings: virtio: Replace HTTP links with HTTPS ones dt-bindings: media: imx274: Add optional input clock and supplies dt-bindings: i2c-gpio: Use 'deprecated' keyword on deprecated properties dt-bindings: interrupt-controller: Fix typos in loongson,liointc.yaml ...
This commit is contained in:
Linus Torvalds
commit
441977979a
|
|
@ -130,7 +130,7 @@ examples:
|
|||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
esdhc@53fb4000 {
|
||||
mmc@53fb4000 {
|
||||
compatible = "fsl,imx35-esdhc";
|
||||
reg = <0x53fb4000 0x4000>;
|
||||
interrupts = <7>;
|
||||
|
|
|
|||
|
|
@ -1,103 +0,0 @@
|
|||
* Clock bindings for Freescale i.MX7ULP
|
||||
|
||||
i.MX7ULP Clock functions are under joint control of the System
|
||||
Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
|
||||
modules, and Core Mode Controller (CMC)1 blocks
|
||||
|
||||
The clocking scheme provides clear separation between M4 domain
|
||||
and A7 domain. Except for a few clock sources shared between two
|
||||
domains, such as the System Oscillator clock, the Slow IRC (SIRC),
|
||||
and and the Fast IRC clock (FIRCLK), clock sources and clock
|
||||
management are separated and contained within each domain.
|
||||
|
||||
M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules.
|
||||
A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules.
|
||||
|
||||
Note: this binding doc is only for A7 clock domain.
|
||||
|
||||
System Clock Generation (SCG) modules:
|
||||
---------------------------------------------------------------------
|
||||
The System Clock Generation (SCG) is responsible for clock generation
|
||||
and distribution across this device. Functions performed by the SCG
|
||||
include: clock reference selection, generation of clock used to derive
|
||||
processor, system, peripheral bus and external memory interface clocks,
|
||||
source selection for peripheral clocks and control of power saving
|
||||
clock gating mode.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: Should be "fsl,imx7ulp-scg1".
|
||||
- reg : Should contain registers location and length.
|
||||
- #clock-cells: Should be <1>.
|
||||
- clocks: Should contain the fixed input clocks.
|
||||
- clock-names: Should contain the following clock names:
|
||||
"rosc", "sosc", "sirc", "firc", "upll", "mpll".
|
||||
|
||||
Peripheral Clock Control (PCC) modules:
|
||||
---------------------------------------------------------------------
|
||||
The Peripheral Clock Control (PCC) is responsible for clock selection,
|
||||
optional division and clock gating mode for peripherals in their
|
||||
respected power domain
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be one of:
|
||||
"fsl,imx7ulp-pcc2",
|
||||
"fsl,imx7ulp-pcc3".
|
||||
- reg : Should contain registers location and length.
|
||||
- #clock-cells: Should be <1>.
|
||||
- clocks: Should contain the fixed input clocks.
|
||||
- clock-names: Should contain the following clock names:
|
||||
"nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2",
|
||||
"apll_pfd1", "apll_pfd0", "upll", "sosc_bus_clk",
|
||||
"mpll", "firc_bus_clk", "rosc", "spll_bus_clk";
|
||||
|
||||
The clock consumer should specify the desired clock by having the clock
|
||||
ID in its "clocks" phandle cell.
|
||||
See include/dt-bindings/clock/imx7ulp-clock.h
|
||||
for the full list of i.MX7ULP clock IDs of each module.
|
||||
|
||||
Examples:
|
||||
|
||||
#include <dt-bindings/clock/imx7ulp-clock.h>
|
||||
|
||||
scg1: scg1@403e0000 {
|
||||
compatible = "fsl,imx7ulp-scg1;
|
||||
reg = <0x403e0000 0x10000>;
|
||||
clocks = <&rosc>, <&sosc>, <&sirc>,
|
||||
<&firc>, <&upll>, <&mpll>;
|
||||
clock-names = "rosc", "sosc", "sirc",
|
||||
"firc", "upll", "mpll";
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
pcc2: pcc2@403f0000 {
|
||||
compatible = "fsl,imx7ulp-pcc2";
|
||||
reg = <0x403f0000 0x10000>;
|
||||
#clock-cells = <1>;
|
||||
clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
|
||||
<&scg1 IMX7ULP_CLK_NIC1_DIV>,
|
||||
<&scg1 IMX7ULP_CLK_DDR_DIV>,
|
||||
<&scg1 IMX7ULP_CLK_APLL_PFD2>,
|
||||
<&scg1 IMX7ULP_CLK_APLL_PFD1>,
|
||||
<&scg1 IMX7ULP_CLK_APLL_PFD0>,
|
||||
<&scg1 IMX7ULP_CLK_UPLL>,
|
||||
<&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
|
||||
<&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
|
||||
<&scg1 IMX7ULP_CLK_ROSC>,
|
||||
<&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
|
||||
clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
|
||||
"apll_pfd2", "apll_pfd1", "apll_pfd0",
|
||||
"upll", "sosc_bus_clk", "mpll",
|
||||
"firc_bus_clk", "rosc", "spll_bus_clk";
|
||||
};
|
||||
|
||||
usdhc1: usdhc@40380000 {
|
||||
compatible = "fsl,imx7ulp-usdhc";
|
||||
reg = <0x40380000 0x10000>;
|
||||
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
|
||||
<&scg1 IMX7ULP_CLK_NIC1_DIV>,
|
||||
<&pcc2 IMX7ULP_CLK_USDHC1>;
|
||||
clock-names ="ipg", "ahb", "per";
|
||||
bus-width = <4>;
|
||||
};
|
||||
|
|
@ -0,0 +1,121 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/clock/imx7ulp-pcc-clock.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Clock bindings for Freescale i.MX7ULP Peripheral Clock Control (PCC) modules
|
||||
|
||||
maintainers:
|
||||
- A.s. Dong <aisheng.dong@nxp.com>
|
||||
|
||||
description: |
|
||||
i.MX7ULP Clock functions are under joint control of the System
|
||||
Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
|
||||
modules, and Core Mode Controller (CMC)1 blocks
|
||||
|
||||
The clocking scheme provides clear separation between M4 domain
|
||||
and A7 domain. Except for a few clock sources shared between two
|
||||
domains, such as the System Oscillator clock, the Slow IRC (SIRC),
|
||||
and and the Fast IRC clock (FIRCLK), clock sources and clock
|
||||
management are separated and contained within each domain.
|
||||
|
||||
M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules.
|
||||
A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules.
|
||||
|
||||
Note: this binding doc is only for A7 clock domain.
|
||||
|
||||
The Peripheral Clock Control (PCC) is responsible for clock selection,
|
||||
optional division and clock gating mode for peripherals in their
|
||||
respected power domain.
|
||||
|
||||
The clock consumer should specify the desired clock by having the clock
|
||||
ID in its "clocks" phandle cell.
|
||||
See include/dt-bindings/clock/imx7ulp-clock.h for the full list of
|
||||
i.MX7ULP clock IDs of each module.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- fsl,imx7ulp-pcc2
|
||||
- fsl,imx7ulp-pcc3
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
'#clock-cells':
|
||||
const: 1
|
||||
|
||||
clocks:
|
||||
items:
|
||||
- description: nic1 bus clock
|
||||
- description: nic1 clock
|
||||
- description: ddr clock
|
||||
- description: apll pfd2
|
||||
- description: apll pfd1
|
||||
- description: apll pfd0
|
||||
- description: usb pll
|
||||
- description: system osc bus clock
|
||||
- description: fast internal reference clock bus
|
||||
- description: rtc osc
|
||||
- description: system pll bus clock
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: nic1_bus_clk
|
||||
- const: nic1_clk
|
||||
- const: ddr_clk
|
||||
- const: apll_pfd2
|
||||
- const: apll_pfd1
|
||||
- const: apll_pfd0
|
||||
- const: upll
|
||||
- const: sosc_bus_clk
|
||||
- const: firc_bus_clk
|
||||
- const: rosc
|
||||
- const: spll_bus_clk
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- '#clock-cells'
|
||||
- clocks
|
||||
- clock-names
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/imx7ulp-clock.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
clock-controller@403f0000 {
|
||||
compatible = "fsl,imx7ulp-pcc2";
|
||||
reg = <0x403f0000 0x10000>;
|
||||
#clock-cells = <1>;
|
||||
clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
|
||||
<&scg1 IMX7ULP_CLK_NIC1_DIV>,
|
||||
<&scg1 IMX7ULP_CLK_DDR_DIV>,
|
||||
<&scg1 IMX7ULP_CLK_APLL_PFD2>,
|
||||
<&scg1 IMX7ULP_CLK_APLL_PFD1>,
|
||||
<&scg1 IMX7ULP_CLK_APLL_PFD0>,
|
||||
<&scg1 IMX7ULP_CLK_UPLL>,
|
||||
<&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
|
||||
<&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
|
||||
<&scg1 IMX7ULP_CLK_ROSC>,
|
||||
<&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
|
||||
clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
|
||||
"apll_pfd2", "apll_pfd1", "apll_pfd0",
|
||||
"upll", "sosc_bus_clk", "firc_bus_clk",
|
||||
"rosc", "spll_bus_clk";
|
||||
};
|
||||
|
||||
mmc@40380000 {
|
||||
compatible = "fsl,imx7ulp-usdhc";
|
||||
reg = <0x40380000 0x10000>;
|
||||
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
|
||||
<&scg1 IMX7ULP_CLK_NIC1_DIV>,
|
||||
<&pcc2 IMX7ULP_CLK_USDHC1>;
|
||||
clock-names ="ipg", "ahb", "per";
|
||||
bus-width = <4>;
|
||||
};
|
||||
|
|
@ -0,0 +1,99 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/clock/imx7ulp-scg-clock.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Clock bindings for Freescale i.MX7ULP System Clock Generation (SCG) modules
|
||||
|
||||
maintainers:
|
||||
- A.s. Dong <aisheng.dong@nxp.com>
|
||||
|
||||
description: |
|
||||
i.MX7ULP Clock functions are under joint control of the System
|
||||
Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
|
||||
modules, and Core Mode Controller (CMC)1 blocks
|
||||
|
||||
The clocking scheme provides clear separation between M4 domain
|
||||
and A7 domain. Except for a few clock sources shared between two
|
||||
domains, such as the System Oscillator clock, the Slow IRC (SIRC),
|
||||
and and the Fast IRC clock (FIRCLK), clock sources and clock
|
||||
management are separated and contained within each domain.
|
||||
|
||||
M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules.
|
||||
A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules.
|
||||
|
||||
Note: this binding doc is only for A7 clock domain.
|
||||
|
||||
The System Clock Generation (SCG) is responsible for clock generation
|
||||
and distribution across this device. Functions performed by the SCG
|
||||
include: clock reference selection, generation of clock used to derive
|
||||
processor, system, peripheral bus and external memory interface clocks,
|
||||
source selection for peripheral clocks and control of power saving
|
||||
clock gating mode.
|
||||
|
||||
The clock consumer should specify the desired clock by having the clock
|
||||
ID in its "clocks" phandle cell.
|
||||
See include/dt-bindings/clock/imx7ulp-clock.h for the full list of
|
||||
i.MX7ULP clock IDs of each module.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: fsl,imx7ulp-scg1
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
'#clock-cells':
|
||||
const: 1
|
||||
|
||||
clocks:
|
||||
items:
|
||||
- description: rtc osc
|
||||
- description: system osc
|
||||
- description: slow internal reference clock
|
||||
- description: fast internal reference clock
|
||||
- description: usb PLL
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: rosc
|
||||
- const: sosc
|
||||
- const: sirc
|
||||
- const: firc
|
||||
- const: upll
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- '#clock-cells'
|
||||
- clocks
|
||||
- clock-names
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/imx7ulp-clock.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
clock-controller@403e0000 {
|
||||
compatible = "fsl,imx7ulp-scg1";
|
||||
reg = <0x403e0000 0x10000>;
|
||||
clocks = <&rosc>, <&sosc>, <&sirc>,
|
||||
<&firc>, <&upll>;
|
||||
clock-names = "rosc", "sosc", "sirc",
|
||||
"firc", "upll";
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
mmc@40380000 {
|
||||
compatible = "fsl,imx7ulp-usdhc";
|
||||
reg = <0x40380000 0x10000>;
|
||||
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
|
||||
<&scg1 IMX7ULP_CLK_NIC1_DIV>,
|
||||
<&pcc2 IMX7ULP_CLK_USDHC1>;
|
||||
clock-names ="ipg", "ahb", "per";
|
||||
bus-width = <4>;
|
||||
};
|
||||
|
|
@ -62,7 +62,7 @@ examples:
|
|||
};
|
||||
|
||||
mmc@5b010000 {
|
||||
compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
|
||||
compatible = "fsl,imx8qxp-usdhc";
|
||||
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x5b010000 0x10000>;
|
||||
clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ SN65DSI86 DSI to eDP bridge chip
|
|||
--------------------------------
|
||||
|
||||
This is the binding for Texas Instruments SN65DSI86 bridge.
|
||||
http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
|
||||
https://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
|
||||
|
||||
Required properties:
|
||||
- compatible: Must be "ti,sn65dsi86"
|
||||
|
|
|
|||
|
|
@ -46,7 +46,7 @@ Optional nodes:
|
|||
crossed and LCD_DATA[0:4] is for Red[3:7] and LCD_DATA[11:15] is
|
||||
for Blue[3-7]. For more details see section 3.1.1 in AM335x
|
||||
Silicon Errata:
|
||||
http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360
|
||||
https://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360
|
||||
|
||||
Example:
|
||||
|
||||
|
|
|
|||
|
|
@ -493,4 +493,4 @@ FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration.
|
|||
--
|
||||
[1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf
|
||||
[2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf
|
||||
[3] http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf
|
||||
[3] https://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf
|
||||
|
|
|
|||
|
|
@ -1,48 +0,0 @@
|
|||
* Marvell PXA GPIO controller
|
||||
|
||||
Required properties:
|
||||
- compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio",
|
||||
"intel,pxa27x-gpio", "intel,pxa3xx-gpio",
|
||||
"marvell,pxa93x-gpio", "marvell,mmp-gpio",
|
||||
"marvell,mmp2-gpio" or marvell,pxa1928-gpio.
|
||||
- reg : Address and length of the register set for the device
|
||||
- interrupts : Should be the port interrupt shared by all gpio pins.
|
||||
There're three gpio interrupts in arch-pxa, and they're gpio0,
|
||||
gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp,
|
||||
gpio_mux.
|
||||
- interrupt-names : Should be the names of irq resources. Each interrupt
|
||||
uses its own interrupt name, so there should be as many interrupt names
|
||||
as referenced interrupts.
|
||||
- interrupt-controller : Identifies the node as an interrupt controller.
|
||||
- #interrupt-cells: Specifies the number of cells needed to encode an
|
||||
interrupt source.
|
||||
- gpio-controller : Marks the device node as a gpio controller.
|
||||
- #gpio-cells : Should be two. The first cell is the pin number and
|
||||
the second cell is used to specify flags. See gpio.txt for possible
|
||||
values.
|
||||
|
||||
Example for a MMP platform:
|
||||
|
||||
gpio: gpio@d4019000 {
|
||||
compatible = "marvell,mmp-gpio";
|
||||
reg = <0xd4019000 0x1000>;
|
||||
interrupts = <49>;
|
||||
interrupt-names = "gpio_mux";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
Example for a PXA3xx platform:
|
||||
|
||||
gpio: gpio@40e00000 {
|
||||
compatible = "intel,pxa3xx-gpio";
|
||||
reg = <0x40e00000 0x10000>;
|
||||
interrupt-names = "gpio0", "gpio1", "gpio_mux";
|
||||
interrupts = <8 9 10>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <0x2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <0x2>;
|
||||
};
|
||||
|
|
@ -0,0 +1,173 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/gpio/mrvl-gpio.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Marvell PXA GPIO controller
|
||||
|
||||
maintainers:
|
||||
- Linus Walleij <linus.walleij@linaro.org>
|
||||
- Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
||||
- Rob Herring <robh+dt@kernel.org>
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- intel,pxa25x-gpio
|
||||
- intel,pxa26x-gpio
|
||||
- intel,pxa27x-gpio
|
||||
- intel,pxa3xx-gpio
|
||||
then:
|
||||
properties:
|
||||
interrupts:
|
||||
minItems: 3
|
||||
maxItems: 3
|
||||
interrupt-names:
|
||||
items:
|
||||
- const: gpio0
|
||||
- const: gpio1
|
||||
- const: gpio_mux
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- marvell,mmp-gpio
|
||||
- marvell,mmp2-gpio
|
||||
then:
|
||||
properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
interrupt-names:
|
||||
items:
|
||||
- const: gpio_mux
|
||||
|
||||
properties:
|
||||
$nodename:
|
||||
pattern: '^gpio@[0-9a-f]+$'
|
||||
|
||||
compatible:
|
||||
enum:
|
||||
- intel,pxa25x-gpio
|
||||
- intel,pxa26x-gpio
|
||||
- intel,pxa27x-gpio
|
||||
- intel,pxa3xx-gpio
|
||||
- marvell,mmp-gpio
|
||||
- marvell,mmp2-gpio
|
||||
- marvell,pxa93x-gpio
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
resets:
|
||||
maxItems: 1
|
||||
|
||||
ranges: true
|
||||
|
||||
'#address-cells':
|
||||
const: 1
|
||||
|
||||
'#size-cells':
|
||||
const: 1
|
||||
|
||||
gpio-controller: true
|
||||
|
||||
'#gpio-cells':
|
||||
const: 2
|
||||
|
||||
gpio-ranges:
|
||||
maxItems: 1
|
||||
|
||||
interrupts: true
|
||||
|
||||
interrupt-names: true
|
||||
|
||||
interrupt-controller: true
|
||||
|
||||
'#interrupt-cells':
|
||||
const: 2
|
||||
|
||||
patternProperties:
|
||||
'^gpio@[0-9a-f]*$':
|
||||
type: object
|
||||
properties:
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- '#address-cells'
|
||||
- '#size-cells'
|
||||
- reg
|
||||
- gpio-controller
|
||||
- '#gpio-cells'
|
||||
- interrupts
|
||||
- interrupt-names
|
||||
- interrupt-controller
|
||||
- '#interrupt-cells'
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/pxa-clock.h>
|
||||
gpio@40e00000 {
|
||||
compatible = "intel,pxa3xx-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x40e00000 0x10000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupts = <8>, <9>, <10>;
|
||||
interrupt-names = "gpio0", "gpio1", "gpio_mux";
|
||||
clocks = <&clks CLK_GPIO>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
- |
|
||||
#include <dt-bindings/clock/marvell,pxa910.h>
|
||||
gpio@d4019000 {
|
||||
compatible = "marvell,mmp-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xd4019000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupts = <49>;
|
||||
interrupt-names = "gpio_mux";
|
||||
clocks = <&soc_clocks PXA910_CLK_GPIO>;
|
||||
resets = <&soc_clocks PXA910_CLK_GPIO>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
ranges;
|
||||
|
||||
gpio@d4019000 {
|
||||
reg = <0xd4019000 0x4>;
|
||||
};
|
||||
|
||||
gpio@d4019004 {
|
||||
reg = <0xd4019004 0x4>;
|
||||
};
|
||||
|
||||
gpio@d4019008 {
|
||||
reg = <0xd4019008 0x4>;
|
||||
};
|
||||
|
||||
gpio@d4019100 {
|
||||
reg = <0xd4019100 0x4>;
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
|
|
@ -52,15 +52,15 @@ properties:
|
|||
description: sda and scl gpio, alternative for {sda,scl}-gpios
|
||||
|
||||
i2c-gpio,sda-open-drain:
|
||||
# Generate a warning if present
|
||||
not: true
|
||||
type: boolean
|
||||
deprecated: true
|
||||
description: this means that something outside of our control has put
|
||||
the GPIO line used for SDA into open drain mode, and that something is
|
||||
not the GPIO chip. It is essentially an inconsistency flag.
|
||||
|
||||
i2c-gpio,scl-open-drain:
|
||||
# Generate a warning if present
|
||||
not: true
|
||||
type: boolean
|
||||
deprecated: true
|
||||
description: this means that something outside of our control has put the
|
||||
GPIO line used for SCL into open drain mode, and that something is not
|
||||
the GPIO chip. It is essentially an inconsistency flag.
|
||||
|
|
|
|||
|
|
@ -1,20 +0,0 @@
|
|||
* Freescale Low Power Inter IC (LPI2C) for i.MX
|
||||
|
||||
Required properties:
|
||||
- compatible :
|
||||
- "fsl,imx7ulp-lpi2c" for LPI2C compatible with the one integrated on i.MX7ULP soc
|
||||
- "fsl,imx8qxp-lpi2c" for LPI2C compatible with the one integrated on i.MX8QXP soc
|
||||
- "fsl,imx8qm-lpi2c" for LPI2C compatible with the one integrated on i.MX8QM soc
|
||||
- reg : address and length of the lpi2c master registers
|
||||
- interrupts : lpi2c interrupt
|
||||
- clocks : lpi2c clock specifier
|
||||
|
||||
Examples:
|
||||
|
||||
lpi2c7: lpi2c7@40a50000 {
|
||||
compatible = "fsl,imx7ulp-lpi2c";
|
||||
reg = <0x40A50000 0x10000>;
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clks IMX7ULP_CLK_LPI2C7>;
|
||||
};
|
||||
|
|
@ -0,0 +1,47 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/i2c/i2c-imx-lpi2c.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Freescale Low Power Inter IC (LPI2C) for i.MX
|
||||
|
||||
maintainers:
|
||||
- Anson Huang <Anson.Huang@nxp.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- fsl,imx7ulp-lpi2c
|
||||
- fsl,imx8qxp-lpi2c
|
||||
- fsl,imx8qm-lpi2c
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- clocks
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/imx7ulp-clock.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
lpi2c7@40a50000 {
|
||||
compatible = "fsl,imx7ulp-lpi2c";
|
||||
reg = <0x40A50000 0x10000>;
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clks IMX7ULP_CLK_LPI2C7>;
|
||||
};
|
||||
|
|
@ -1,49 +0,0 @@
|
|||
* Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
|
||||
|
||||
Required properties:
|
||||
- compatible :
|
||||
- "fsl,imx1-i2c" for I2C compatible with the one integrated on i.MX1 SoC
|
||||
- "fsl,imx21-i2c" for I2C compatible with the one integrated on i.MX21 SoC
|
||||
- "fsl,vf610-i2c" for I2C compatible with the one integrated on Vybrid vf610 SoC
|
||||
- reg : Should contain I2C/HS-I2C registers location and length
|
||||
- interrupts : Should contain I2C/HS-I2C interrupt
|
||||
- clocks : Should contain the I2C/HS-I2C clock specifier
|
||||
|
||||
Optional properties:
|
||||
- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
|
||||
The absence of the property indicates the default frequency 100 kHz.
|
||||
- dmas: A list of two dma specifiers, one for each entry in dma-names.
|
||||
- dma-names: should contain "tx" and "rx".
|
||||
- scl-gpios: specify the gpio related to SCL pin
|
||||
- sda-gpios: specify the gpio related to SDA pin
|
||||
- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c
|
||||
bus recovery, call it "gpio" state
|
||||
|
||||
Examples:
|
||||
|
||||
i2c@83fc4000 { /* I2C2 on i.MX51 */
|
||||
compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
|
||||
reg = <0x83fc4000 0x4000>;
|
||||
interrupts = <63>;
|
||||
};
|
||||
|
||||
i2c@70038000 { /* HS-I2C on i.MX51 */
|
||||
compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
|
||||
reg = <0x70038000 0x4000>;
|
||||
interrupts = <64>;
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
i2c0: i2c@40066000 { /* i2c0 on vf610 */
|
||||
compatible = "fsl,vf610-i2c";
|
||||
reg = <0x40066000 0x1000>;
|
||||
interrupts =<0 71 0x04>;
|
||||
dmas = <&edma0 0 50>,
|
||||
<&edma0 0 51>;
|
||||
dma-names = "rx","tx";
|
||||
pinctrl-names = "default", "gpio";
|
||||
pinctrl-0 = <&pinctrl_i2c1>;
|
||||
pinctrl-1 = <&pinctrl_i2c1_gpio>;
|
||||
scl-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
|
||||
sda-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
|
@ -0,0 +1,103 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/i2c/i2c-imx.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
|
||||
|
||||
maintainers:
|
||||
- Wolfram Sang <wolfram@the-dreams.de>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: fsl,imx1-i2c
|
||||
- const: fsl,imx21-i2c
|
||||
- const: fsl,vf610-i2c
|
||||
- items:
|
||||
- const: fsl,imx35-i2c
|
||||
- const: fsl,imx1-i2c
|
||||
- items:
|
||||
- enum:
|
||||
- fsl,imx25-i2c
|
||||
- fsl,imx27-i2c
|
||||
- fsl,imx31-i2c
|
||||
- fsl,imx50-i2c
|
||||
- fsl,imx51-i2c
|
||||
- fsl,imx53-i2c
|
||||
- fsl,imx6q-i2c
|
||||
- fsl,imx6sl-i2c
|
||||
- fsl,imx6sx-i2c
|
||||
- fsl,imx6sll-i2c
|
||||
- fsl,imx6ul-i2c
|
||||
- fsl,imx7s-i2c
|
||||
- fsl,imx8mq-i2c
|
||||
- fsl,imx8mm-i2c
|
||||
- fsl,imx8mn-i2c
|
||||
- fsl,imx8mp-i2c
|
||||
- const: fsl,imx21-i2c
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
clock-names:
|
||||
const: ipg
|
||||
|
||||
clock-frequency:
|
||||
enum: [ 100000, 400000 ]
|
||||
|
||||
dmas:
|
||||
items:
|
||||
- description: DMA controller phandle and request line for RX
|
||||
- description: DMA controller phandle and request line for TX
|
||||
|
||||
dma-names:
|
||||
items:
|
||||
- const: rx
|
||||
- const: tx
|
||||
|
||||
sda-gpios:
|
||||
maxItems: 1
|
||||
|
||||
scl-gpios:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- clocks
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/imx5-clock.h>
|
||||
#include <dt-bindings/clock/vf610-clock.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
i2c@83fc4000 {
|
||||
compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
|
||||
reg = <0x83fc4000 0x4000>;
|
||||
interrupts = <63>;
|
||||
clocks = <&clks IMX5_CLK_I2C2_GATE>;
|
||||
};
|
||||
|
||||
i2c@40066000 {
|
||||
compatible = "fsl,vf610-i2c";
|
||||
reg = <0x40066000 0x1000>;
|
||||
interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clks VF610_CLK_I2C0>;
|
||||
clock-names = "ipg";
|
||||
dmas = <&edma0 0 50>,
|
||||
<&edma0 0 51>;
|
||||
dma-names = "rx", "tx";
|
||||
};
|
||||
|
|
@ -1,25 +0,0 @@
|
|||
* Freescale MXS Inter IC (I2C) Controller
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "fsl,<chip>-i2c"
|
||||
- reg: Should contain registers location and length
|
||||
- interrupts: Should contain ERROR interrupt number
|
||||
- clock-frequency: Desired I2C bus clock frequency in Hz.
|
||||
Only 100000Hz and 400000Hz modes are supported.
|
||||
- dmas: DMA specifier, consisting of a phandle to DMA controller node
|
||||
and I2C DMA channel ID.
|
||||
Refer to dma.txt and fsl-mxs-dma.txt for details.
|
||||
- dma-names: Must be "rx-tx".
|
||||
|
||||
Examples:
|
||||
|
||||
i2c0: i2c@80058000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,imx28-i2c";
|
||||
reg = <0x80058000 2000>;
|
||||
interrupts = <111>;
|
||||
clock-frequency = <100000>;
|
||||
dmas = <&dma_apbx 6>;
|
||||
dma-names = "rx-tx";
|
||||
};
|
||||
|
|
@ -0,0 +1,51 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/i2c/i2c-mxs.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Freescale MXS Inter IC (I2C) Controller
|
||||
|
||||
maintainers:
|
||||
- Shawn Guo <shawn.guo@linaro.org>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- fsl,imx23-i2c
|
||||
- fsl,imx28-i2c
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
clock-frequency:
|
||||
enum: [ 100000, 400000 ]
|
||||
|
||||
dmas:
|
||||
maxItems: 1
|
||||
|
||||
dma-names:
|
||||
const: rx-tx
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- dmas
|
||||
- dma-names
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
i2c@80058000 {
|
||||
compatible = "fsl,imx28-i2c";
|
||||
reg = <0x80058000 2000>;
|
||||
interrupts = <111>;
|
||||
clock-frequency = <100000>;
|
||||
dmas = <&dma_apbx 6>;
|
||||
dma-names = "rx-tx";
|
||||
};
|
||||
|
|
@ -1,31 +0,0 @@
|
|||
* Marvell MMP I2C controller
|
||||
|
||||
Required properties :
|
||||
|
||||
- reg : Offset and length of the register set for the device
|
||||
- compatible : should be "mrvl,mmp-twsi" where mmp is the name of a
|
||||
compatible processor, e.g. pxa168, pxa910, mmp2, mmp3.
|
||||
For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required
|
||||
as shown in the example below.
|
||||
For the Armada 3700, the compatible should be "marvell,armada-3700-i2c".
|
||||
|
||||
Recommended properties :
|
||||
|
||||
- interrupts : the interrupt number
|
||||
- mrvl,i2c-polling : Disable interrupt of i2c controller. Polling
|
||||
status register of i2c controller instead.
|
||||
- mrvl,i2c-fast-mode : Enable fast mode of i2c controller.
|
||||
|
||||
Examples:
|
||||
twsi1: i2c@d4011000 {
|
||||
compatible = "mrvl,mmp-twsi";
|
||||
reg = <0xd4011000 0x1000>;
|
||||
interrupts = <7>;
|
||||
mrvl,i2c-fast-mode;
|
||||
};
|
||||
|
||||
twsi2: i2c@d4025000 {
|
||||
compatible = "mrvl,mmp-twsi";
|
||||
reg = <0xd4025000 0x1000>;
|
||||
interrupts = <58>;
|
||||
};
|
||||
|
|
@ -0,0 +1,74 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/i2c/i2c-pxa.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Marvell MMP I2C controller bindings
|
||||
|
||||
maintainers:
|
||||
- Rob Herring <robh+dt@kernel.org>
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/i2c/i2c-controller.yaml#
|
||||
- if:
|
||||
not:
|
||||
required:
|
||||
- mrvl,i2c-polling
|
||||
then:
|
||||
required:
|
||||
- interrupts
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- mrvl,mmp-twsi
|
||||
- mrvl,pxa-i2c
|
||||
- marvell,armada-3700-i2c
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
minItems: 1
|
||||
|
||||
resets:
|
||||
minItems: 1
|
||||
|
||||
mrvl,i2c-polling:
|
||||
$ref: /schemas/types.yaml#/definitions/flag
|
||||
description: |
|
||||
Disable interrupt of i2c controller. Polling status register of i2c
|
||||
controller instead.
|
||||
|
||||
mrvl,i2c-fast-mode:
|
||||
$ref: /schemas/types.yaml#/definitions/flag
|
||||
description: Enable fast mode of i2c controller.
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- clocks
|
||||
- '#address-cells'
|
||||
- '#size-cells'
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/marvell,mmp2.h>
|
||||
i2c@d4011000 {
|
||||
compatible = "mrvl,mmp-twsi";
|
||||
reg = <0xd4011000 0x1000>;
|
||||
interrupts = <7>;
|
||||
clocks = <&soc_clocks MMP2_CLK_TWSI1>;
|
||||
mrvl,i2c-fast-mode;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
...
|
||||
|
|
@ -21,7 +21,7 @@ controller state. The mux controller state is described in
|
|||
|
||||
Example:
|
||||
mux: mux-controller {
|
||||
compatible = "mux-gpio";
|
||||
compatible = "gpio-mux";
|
||||
#mux-control-cells = <0>;
|
||||
|
||||
mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
|
||||
|
|
|
|||
|
|
@ -1,53 +0,0 @@
|
|||
* Freescale i.MX Keypad Port(KPP) device tree bindings
|
||||
|
||||
The KPP is designed to interface with a keypad matrix with 2-point contact
|
||||
or 3-point contact keys. The KPP is designed to simplify the software task
|
||||
of scanning a keypad matrix. The KPP is capable of detecting, debouncing,
|
||||
and decoding one or multiple keys pressed simultaneously on a keypad.
|
||||
|
||||
Required SoC Specific Properties:
|
||||
- compatible: Should be "fsl,<soc>-kpp".
|
||||
|
||||
- reg: Physical base address of the KPP and length of memory mapped
|
||||
region.
|
||||
|
||||
- interrupts: The KPP interrupt number to the CPU(s).
|
||||
|
||||
- clocks: The clock provided by the SoC to the KPP. Some SoCs use dummy
|
||||
clock(The clock for the KPP is provided by the SoCs automatically).
|
||||
|
||||
Required Board Specific Properties:
|
||||
- pinctrl-names: The definition can be found at
|
||||
pinctrl/pinctrl-bindings.txt.
|
||||
|
||||
- pinctrl-0: The definition can be found at
|
||||
pinctrl/pinctrl-bindings.txt.
|
||||
|
||||
- linux,keymap: The definition can be found at
|
||||
bindings/input/matrix-keymap.txt.
|
||||
|
||||
Example:
|
||||
kpp: kpp@73f94000 {
|
||||
compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
|
||||
reg = <0x73f94000 0x4000>;
|
||||
interrupts = <60>;
|
||||
clocks = <&clks 0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_kpp_1>;
|
||||
linux,keymap = <0x00000067 /* KEY_UP */
|
||||
0x0001006c /* KEY_DOWN */
|
||||
0x00020072 /* KEY_VOLUMEDOWN */
|
||||
0x00030066 /* KEY_HOME */
|
||||
0x0100006a /* KEY_RIGHT */
|
||||
0x01010069 /* KEY_LEFT */
|
||||
0x0102001c /* KEY_ENTER */
|
||||
0x01030073 /* KEY_VOLUMEUP */
|
||||
0x02000040 /* KEY_F6 */
|
||||
0x02010042 /* KEY_F8 */
|
||||
0x02020043 /* KEY_F9 */
|
||||
0x02030044 /* KEY_F10 */
|
||||
0x0300003b /* KEY_F1 */
|
||||
0x0301003c /* KEY_F2 */
|
||||
0x0302003d /* KEY_F3 */
|
||||
0x03030074>; /* KEY_POWER */
|
||||
};
|
||||
|
|
@ -0,0 +1,85 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/input/imx-keypad.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Freescale i.MX Keypad Port(KPP) device tree bindings
|
||||
|
||||
maintainers:
|
||||
- Liu Ying <gnuiyl@gmail.com>
|
||||
|
||||
allOf:
|
||||
- $ref: "/schemas/input/matrix-keymap.yaml#"
|
||||
|
||||
description: |
|
||||
The KPP is designed to interface with a keypad matrix with 2-point contact
|
||||
or 3-point contact keys. The KPP is designed to simplify the software task
|
||||
of scanning a keypad matrix. The KPP is capable of detecting, debouncing,
|
||||
and decoding one or multiple keys pressed simultaneously on a keypad.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: fsl,imx21-kpp
|
||||
- items:
|
||||
- enum:
|
||||
- fsl,imx25-kpp
|
||||
- fsl,imx27-kpp
|
||||
- fsl,imx31-kpp
|
||||
- fsl,imx35-kpp
|
||||
- fsl,imx51-kpp
|
||||
- fsl,imx53-kpp
|
||||
- fsl,imx50-kpp
|
||||
- fsl,imx6q-kpp
|
||||
- fsl,imx6sx-kpp
|
||||
- fsl,imx6sl-kpp
|
||||
- fsl,imx6sll-kpp
|
||||
- fsl,imx6ul-kpp
|
||||
- fsl,imx7d-kpp
|
||||
- const: fsl,imx21-kpp
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- clocks
|
||||
- linux,keymap
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
keypad@73f94000 {
|
||||
compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
|
||||
reg = <0x73f94000 0x4000>;
|
||||
interrupts = <60>;
|
||||
clocks = <&clks 0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_kpp_1>;
|
||||
linux,keymap = <0x00000067 /* KEY_UP */
|
||||
0x0001006c /* KEY_DOWN */
|
||||
0x00020072 /* KEY_VOLUMEDOWN */
|
||||
0x00030066 /* KEY_HOME */
|
||||
0x0100006a /* KEY_RIGHT */
|
||||
0x01010069 /* KEY_LEFT */
|
||||
0x0102001c /* KEY_ENTER */
|
||||
0x01030073 /* KEY_VOLUMEUP */
|
||||
0x02000040 /* KEY_F6 */
|
||||
0x02010042 /* KEY_F8 */
|
||||
0x02020043 /* KEY_F9 */
|
||||
0x02030044 /* KEY_F10 */
|
||||
0x0300003b /* KEY_F1 */
|
||||
0x0301003c /* KEY_F2 */
|
||||
0x0302003d /* KEY_F3 */
|
||||
0x03030074>; /* KEY_POWER */
|
||||
};
|
||||
|
|
@ -1,27 +1 @@
|
|||
A simple common binding for matrix-connected key boards. Currently targeted at
|
||||
defining the keys in the scope of linux key codes since that is a stable and
|
||||
standardized interface at this time.
|
||||
|
||||
Required properties:
|
||||
- linux,keymap: an array of packed 1-cell entries containing the equivalent
|
||||
of row, column and linux key-code. The 32-bit big endian cell is packed
|
||||
as:
|
||||
row << 24 | column << 16 | key-code
|
||||
|
||||
Optional properties:
|
||||
Properties for the number of rows and columns are optional because some
|
||||
drivers will use fixed values for these.
|
||||
- keypad,num-rows: Number of row lines connected to the keypad controller.
|
||||
- keypad,num-columns: Number of column lines connected to the keypad
|
||||
controller.
|
||||
|
||||
Some users of this binding might choose to specify secondary keymaps for
|
||||
cases where there is a modifier key such as a Fn key. Proposed names
|
||||
for said properties are "linux,fn-keymap" or with another descriptive
|
||||
word for the modifier other from "Fn".
|
||||
|
||||
Example:
|
||||
linux,keymap = < 0x00030012
|
||||
0x0102003a >;
|
||||
keypad,num-rows = <2>;
|
||||
keypad,num-columns = <8>;
|
||||
This file has been moved to matrix-keymap.yaml
|
||||
|
|
|
|||
|
|
@ -0,0 +1,46 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/input/matrix-keymap.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Common key matrices binding for matrix-connected key boards
|
||||
|
||||
maintainers:
|
||||
- Olof Johansson <olof@lixom.net>
|
||||
|
||||
description: |
|
||||
A simple common binding for matrix-connected key boards. Currently targeted at
|
||||
defining the keys in the scope of linux key codes since that is a stable and
|
||||
standardized interface at this time.
|
||||
|
||||
Some users of this binding might choose to specify secondary keymaps for
|
||||
cases where there is a modifier key such as a Fn key. Proposed names
|
||||
for said properties are "linux,fn-keymap" or with another descriptive
|
||||
word for the modifier other from "Fn".
|
||||
|
||||
properties:
|
||||
linux,keymap:
|
||||
$ref: '/schemas/types.yaml#/definitions/uint32-array'
|
||||
description: |
|
||||
An array of packed 1-cell entries containing the equivalent of row,
|
||||
column and linux key-code. The 32-bit big endian cell is packed as:
|
||||
row << 24 | column << 16 | key-code
|
||||
|
||||
keypad,num-rows:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: Number of row lines connected to the keypad controller.
|
||||
|
||||
keypad,num-columns:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: Number of column lines connected to the keypad controller.
|
||||
|
||||
examples:
|
||||
- |
|
||||
keypad {
|
||||
/* ... */
|
||||
linux,keymap = < 0x00030012
|
||||
0x0102003a >;
|
||||
keypad,num-rows = <2>;
|
||||
keypad,num-columns = <8>;
|
||||
};
|
||||
|
|
@ -51,8 +51,8 @@ properties:
|
|||
description: |
|
||||
This property points how the children interrupts will be mapped into CPU
|
||||
interrupt lines. Each cell refers to a parent interrupt line from 0 to 3
|
||||
and each bit in the cell refers to a children interrupt fron 0 to 31.
|
||||
If a CPU interrupt line didn't connected with liointc, then keep it's
|
||||
and each bit in the cell refers to a child interrupt from 0 to 31.
|
||||
If a CPU interrupt line didn't connect with liointc, then keep its
|
||||
cell with zero.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
minItems: 4
|
||||
|
|
|
|||
|
|
@ -1,64 +0,0 @@
|
|||
* Marvell MMP Interrupt controller
|
||||
|
||||
Required properties:
|
||||
- compatible : Should be
|
||||
"mrvl,mmp-intc" on Marvel MMP,
|
||||
"mrvl,mmp2-intc" along with "mrvl,mmp2-mux-intc" on MMP2 or
|
||||
"marvell,mmp3-intc" with "mrvl,mmp2-mux-intc" on MMP3
|
||||
- reg : Address and length of the register set of the interrupt controller.
|
||||
If the interrupt controller is intc, address and length means the range
|
||||
of the whole interrupt controller. The "marvell,mmp3-intc" controller
|
||||
also has a secondary range for the second CPU core. If the interrupt
|
||||
controller is mux-intc, address and length means one register. Since
|
||||
address of mux-intc is in the range of intc. mux-intc is secondary
|
||||
interrupt controller.
|
||||
- reg-names : Name of the register set of the interrupt controller. It's
|
||||
only required in mux-intc interrupt controller.
|
||||
- interrupts : Should be the port interrupt shared by mux interrupts. It's
|
||||
only required in mux-intc interrupt controller.
|
||||
- interrupt-controller : Identifies the node as an interrupt controller.
|
||||
- #interrupt-cells : Specifies the number of cells needed to encode an
|
||||
interrupt source.
|
||||
- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt
|
||||
controller.
|
||||
- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge
|
||||
detection first.
|
||||
|
||||
Example:
|
||||
intc: interrupt-controller@d4282000 {
|
||||
compatible = "mrvl,mmp2-intc";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
reg = <0xd4282000 0x1000>;
|
||||
mrvl,intc-nr-irqs = <64>;
|
||||
};
|
||||
|
||||
intcmux4@d4282150 {
|
||||
compatible = "mrvl,mmp2-mux-intc";
|
||||
interrupts = <4>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
reg = <0x150 0x4>, <0x168 0x4>;
|
||||
reg-names = "mux status", "mux mask";
|
||||
mrvl,intc-nr-irqs = <2>;
|
||||
};
|
||||
|
||||
* Marvell Orion Interrupt controller
|
||||
|
||||
Required properties
|
||||
- compatible : Should be "marvell,orion-intc".
|
||||
- #interrupt-cells: Specifies the number of cells needed to encode an
|
||||
interrupt source. Supported value is <1>.
|
||||
- interrupt-controller : Declare this node to be an interrupt controller.
|
||||
- reg : Interrupt mask address. A list of 4 byte ranges, one per controller.
|
||||
One entry in the list represents 32 interrupts.
|
||||
|
||||
Example:
|
||||
|
||||
intc: interrupt-controller {
|
||||
compatible = "marvell,orion-intc", "marvell,intc";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
reg = <0xfed20204 0x04>,
|
||||
<0xfed20214 0x04>;
|
||||
};
|
||||
|
|
@ -0,0 +1,134 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/interrupt-controller/mrvl,intc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Marvell MMP/Orion Interrupt controller bindings
|
||||
|
||||
maintainers:
|
||||
- Thomas Gleixner <tglx@linutronix.de>
|
||||
- Jason Cooper <jason@lakedaemon.net>
|
||||
- Marc Zyngier <maz@kernel.org>
|
||||
- Rob Herring <robh+dt@kernel.org>
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
not:
|
||||
contains:
|
||||
const: marvell,orion-intc
|
||||
then:
|
||||
required:
|
||||
- mrvl,intc-nr-irqs
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- mrvl,mmp-intc
|
||||
- mrvl,mmp2-intc
|
||||
then:
|
||||
properties:
|
||||
reg:
|
||||
maxItems: 1
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- marvell,mmp3-intc
|
||||
- mrvl,mmp2-mux-intc
|
||||
then:
|
||||
properties:
|
||||
reg:
|
||||
minItems: 2
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: mrvl,mmp2-mux-intc
|
||||
then:
|
||||
properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
reg-names:
|
||||
items:
|
||||
- const: 'mux status'
|
||||
- const: 'mux mask'
|
||||
required:
|
||||
- interrupts
|
||||
else:
|
||||
properties:
|
||||
interrupts: false
|
||||
|
||||
properties:
|
||||
'#interrupt-cells':
|
||||
const: 1
|
||||
|
||||
compatible:
|
||||
enum:
|
||||
- mrvl,mmp-intc
|
||||
- mrvl,mmp2-intc
|
||||
- marvell,mmp3-intc
|
||||
- marvell,orion-intc
|
||||
- mrvl,mmp2-mux-intc
|
||||
|
||||
reg:
|
||||
minItems: 1
|
||||
maxItems: 2
|
||||
|
||||
reg-names: true
|
||||
|
||||
interrupts: true
|
||||
|
||||
interrupt-controller: true
|
||||
|
||||
mrvl,intc-nr-irqs:
|
||||
description: |
|
||||
Specifies the number of interrupts in the interrupt controller.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
mrvl,clr-mfp-irq:
|
||||
description: |
|
||||
Specifies the interrupt that needs to clear MFP edge detection first.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
required:
|
||||
- '#interrupt-cells'
|
||||
- compatible
|
||||
- reg
|
||||
- interrupt-controller
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
interrupt-controller@d4282000 {
|
||||
compatible = "mrvl,mmp2-intc";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
reg = <0xd4282000 0x1000>;
|
||||
mrvl,intc-nr-irqs = <64>;
|
||||
};
|
||||
|
||||
interrupt-controller@d4282150 {
|
||||
compatible = "mrvl,mmp2-mux-intc";
|
||||
interrupts = <4>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
reg = <0x150 0x4>, <0x168 0x4>;
|
||||
reg-names = "mux status", "mux mask";
|
||||
mrvl,intc-nr-irqs = <2>;
|
||||
};
|
||||
- |
|
||||
interrupt-controller@fed20204 {
|
||||
compatible = "marvell,orion-intc";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
reg = <0xfed20204 0x04>,
|
||||
<0xfed20214 0x04>;
|
||||
};
|
||||
|
||||
...
|
||||
|
|
@ -1,43 +0,0 @@
|
|||
DT bindings for the Renesas RZ/A1 Interrupt Controller
|
||||
|
||||
The RZ/A1 Interrupt Controller is a front-end for the GIC found on Renesas
|
||||
RZ/A1 and RZ/A2 SoCs:
|
||||
- IRQ sense select for 8 external interrupts, 1:1-mapped to 8 GIC SPI
|
||||
interrupts,
|
||||
- NMI edge select.
|
||||
|
||||
Required properties:
|
||||
- compatible: Must be "renesas,<soctype>-irqc", and "renesas,rza1-irqc" as
|
||||
fallback.
|
||||
Examples with soctypes are:
|
||||
- "renesas,r7s72100-irqc" (RZ/A1H)
|
||||
- "renesas,r7s9210-irqc" (RZ/A2M)
|
||||
- #interrupt-cells: Must be 2 (an interrupt index and flags, as defined
|
||||
in interrupts.txt in this directory)
|
||||
- #address-cells: Must be zero
|
||||
- interrupt-controller: Marks the device as an interrupt controller
|
||||
- reg: Base address and length of the memory resource used by the interrupt
|
||||
controller
|
||||
- interrupt-map: Specifies the mapping from external interrupts to GIC
|
||||
interrupts
|
||||
- interrupt-map-mask: Must be <7 0>
|
||||
|
||||
Example:
|
||||
|
||||
irqc: interrupt-controller@fcfef800 {
|
||||
compatible = "renesas,r7s72100-irqc", "renesas,rza1-irqc";
|
||||
#interrupt-cells = <2>;
|
||||
#address-cells = <0>;
|
||||
interrupt-controller;
|
||||
reg = <0xfcfef800 0x6>;
|
||||
interrupt-map =
|
||||
<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-map-mask = <7 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,80 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/interrupt-controller/renesas,rza1-irqc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Renesas RZ/A1 Interrupt Controller
|
||||
|
||||
maintainers:
|
||||
- Chris Brandt <chris.brandt@renesas.com>
|
||||
- Geert Uytterhoeven <geert+renesas@glider.be>
|
||||
|
||||
description: |
|
||||
The RZ/A1 Interrupt Controller is a front-end for the GIC found on Renesas RZ/A1 and
|
||||
RZ/A2 SoCs:
|
||||
- IRQ sense select for 8 external interrupts, 1:1-mapped to 8 GIC SPI interrupts,
|
||||
- NMI edge select.
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/interrupt-controller.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
items:
|
||||
- enum:
|
||||
- renesas,r7s72100-irqc # RZ/A1H
|
||||
- renesas,r7s9210-irqc # RZ/A2M
|
||||
- const: renesas,rza1-irqc
|
||||
|
||||
'#interrupt-cells':
|
||||
const: 2
|
||||
|
||||
'#address-cells':
|
||||
const: 0
|
||||
|
||||
interrupt-controller: true
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-map:
|
||||
maxItems: 8
|
||||
description: Specifies the mapping from external interrupts to GIC interrupts.
|
||||
|
||||
interrupt-map-mask:
|
||||
items:
|
||||
- const: 7
|
||||
- const: 0
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- '#interrupt-cells'
|
||||
- '#address-cells'
|
||||
- interrupt-controller
|
||||
- reg
|
||||
- interrupt-map
|
||||
- interrupt-map-mask
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
irqc: interrupt-controller@fcfef800 {
|
||||
compatible = "renesas,r7s72100-irqc", "renesas,rza1-irqc";
|
||||
#interrupt-cells = <2>;
|
||||
#address-cells = <0>;
|
||||
interrupt-controller;
|
||||
reg = <0xfcfef800 0x6>;
|
||||
interrupt-map =
|
||||
<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-map-mask = <7 0>;
|
||||
};
|
||||
|
|
@ -32,6 +32,7 @@ properties:
|
|||
- enum:
|
||||
- renesas,ipmmu-r8a774a1 # RZ/G2M
|
||||
- renesas,ipmmu-r8a774b1 # RZ/G2N
|
||||
- renesas,ipmmu-r8a774e1 # RZ/G2H
|
||||
- renesas,ipmmu-r8a774c0 # RZ/G2E
|
||||
- renesas,ipmmu-r8a7795 # R-Car H3
|
||||
- renesas,ipmmu-r8a7796 # R-Car M3-W
|
||||
|
|
|
|||
|
|
@ -1,16 +0,0 @@
|
|||
gpio-backlight bindings
|
||||
|
||||
Required properties:
|
||||
- compatible: "gpio-backlight"
|
||||
- gpios: describes the gpio that is used for enabling/disabling the backlight.
|
||||
refer to bindings/gpio/gpio.txt for more details.
|
||||
|
||||
Optional properties:
|
||||
- default-on: enable the backlight at boot.
|
||||
|
||||
Example:
|
||||
backlight {
|
||||
compatible = "gpio-backlight";
|
||||
gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
|
||||
default-on;
|
||||
};
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: gpio-backlight bindings
|
||||
|
||||
maintainers:
|
||||
- Lee Jones <lee.jones@linaro.org>
|
||||
- Daniel Thompson <daniel.thompson@linaro.org>
|
||||
- Jingoo Han <jingoohan1@gmail.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: gpio-backlight
|
||||
|
||||
gpios:
|
||||
description: The gpio that is used for enabling/disabling the backlight.
|
||||
maxItems: 1
|
||||
|
||||
default-on:
|
||||
description: enable the backlight at boot.
|
||||
type: boolean
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- gpios
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
backlight {
|
||||
compatible = "gpio-backlight";
|
||||
gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
|
||||
default-on;
|
||||
};
|
||||
|
||||
...
|
||||
|
|
@ -1,28 +0,0 @@
|
|||
led-backlight bindings
|
||||
|
||||
This binding is used to describe a basic backlight device made of LEDs.
|
||||
It can also be used to describe a backlight device controlled by the output of
|
||||
a LED driver.
|
||||
|
||||
Required properties:
|
||||
- compatible: "led-backlight"
|
||||
- leds: a list of LEDs
|
||||
|
||||
Optional properties:
|
||||
- brightness-levels: Array of distinct brightness levels. The levels must be
|
||||
in the range accepted by the underlying LED devices.
|
||||
This is used to translate a backlight brightness level
|
||||
into a LED brightness level. If it is not provided, the
|
||||
identity mapping is used.
|
||||
|
||||
- default-brightness-level: The default brightness level.
|
||||
|
||||
Example:
|
||||
|
||||
backlight {
|
||||
compatible = "led-backlight";
|
||||
|
||||
leds = <&led1>, <&led2>;
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <6>;
|
||||
};
|
||||
|
|
@ -0,0 +1,57 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/leds/backlight/led-backlight.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: led-backlight bindings
|
||||
|
||||
maintainers:
|
||||
- Lee Jones <lee.jones@linaro.org>
|
||||
- Daniel Thompson <daniel.thompson@linaro.org>
|
||||
- Jingoo Han <jingoohan1@gmail.com>
|
||||
|
||||
description:
|
||||
This binding is used to describe a basic backlight device made of LEDs. It
|
||||
can also be used to describe a backlight device controlled by the output of
|
||||
a LED driver.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: led-backlight
|
||||
|
||||
leds:
|
||||
description: A list of LED nodes
|
||||
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||||
|
||||
brightness-levels:
|
||||
description:
|
||||
Array of distinct brightness levels. The levels must be in the range
|
||||
accepted by the underlying LED devices. This is used to translate a
|
||||
backlight brightness level into a LED brightness level. If it is not
|
||||
provided, the identity mapping is used.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
|
||||
default-brightness-level:
|
||||
description:
|
||||
The default brightness level (index into the array defined by the
|
||||
"brightness-levels" property).
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- leds
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
backlight {
|
||||
compatible = "led-backlight";
|
||||
|
||||
leds = <&led1>, <&led2>;
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <6>;
|
||||
};
|
||||
|
||||
...
|
||||
|
|
@ -1,61 +0,0 @@
|
|||
pwm-backlight bindings
|
||||
|
||||
Required properties:
|
||||
- compatible: "pwm-backlight"
|
||||
- pwms: OF device-tree PWM specification (see PWM binding[0])
|
||||
- power-supply: regulator for supply voltage
|
||||
|
||||
Optional properties:
|
||||
- pwm-names: a list of names for the PWM devices specified in the
|
||||
"pwms" property (see PWM binding[0])
|
||||
- enable-gpios: contains a single GPIO specifier for the GPIO which enables
|
||||
and disables the backlight (see GPIO binding[1])
|
||||
- post-pwm-on-delay-ms: Delay in ms between setting an initial (non-zero) PWM
|
||||
and enabling the backlight using GPIO.
|
||||
- pwm-off-delay-ms: Delay in ms between disabling the backlight using GPIO
|
||||
and setting PWM value to 0.
|
||||
- brightness-levels: Array of distinct brightness levels. Typically these
|
||||
are in the range from 0 to 255, but any range starting at
|
||||
0 will do. The actual brightness level (PWM duty cycle)
|
||||
will be interpolated from these values. 0 means a 0% duty
|
||||
cycle (darkest/off), while the last value in the array
|
||||
represents a 100% duty cycle (brightest).
|
||||
- default-brightness-level: The default brightness level (index into the
|
||||
array defined by the "brightness-levels" property).
|
||||
- num-interpolated-steps: Number of interpolated steps between each value
|
||||
of brightness-levels table. This way a high
|
||||
resolution pwm duty cycle can be used without
|
||||
having to list out every possible value in the
|
||||
brightness-level array.
|
||||
|
||||
[0]: Documentation/devicetree/bindings/pwm/pwm.txt
|
||||
[1]: Documentation/devicetree/bindings/gpio/gpio.txt
|
||||
|
||||
Example:
|
||||
|
||||
backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm 0 5000000>;
|
||||
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <6>;
|
||||
|
||||
power-supply = <&vdd_bl_reg>;
|
||||
enable-gpios = <&gpio 58 0>;
|
||||
post-pwm-on-delay-ms = <10>;
|
||||
pwm-off-delay-ms = <10>;
|
||||
};
|
||||
|
||||
Example using num-interpolation-steps:
|
||||
|
||||
backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm 0 5000000>;
|
||||
|
||||
brightness-levels = <0 2048 4096 8192 16384 65535>;
|
||||
num-interpolated-steps = <2048>;
|
||||
default-brightness-level = <4096>;
|
||||
|
||||
power-supply = <&vdd_bl_reg>;
|
||||
enable-gpios = <&gpio 58 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,104 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/leds/backlight/pwm-backlight.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: pwm-backlight bindings
|
||||
|
||||
maintainers:
|
||||
- Lee Jones <lee.jones@linaro.org>
|
||||
- Daniel Thompson <daniel.thompson@linaro.org>
|
||||
- Jingoo Han <jingoohan1@gmail.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: pwm-backlight
|
||||
|
||||
pwms:
|
||||
maxItems: 1
|
||||
|
||||
pwm-names: true
|
||||
|
||||
power-supply:
|
||||
description: regulator for supply voltage
|
||||
|
||||
enable-gpios:
|
||||
description:
|
||||
Contains a single GPIO specifier for the GPIO which enables and disables
|
||||
the backlight.
|
||||
maxItems: 1
|
||||
|
||||
post-pwm-on-delay-ms:
|
||||
description:
|
||||
Delay in ms between setting an initial (non-zero) PWM and enabling the
|
||||
backlight using GPIO.
|
||||
|
||||
pwm-off-delay-ms:
|
||||
description:
|
||||
Delay in ms between disabling the backlight using GPIO and setting PWM
|
||||
value to 0.
|
||||
|
||||
brightness-levels:
|
||||
description:
|
||||
Array of distinct brightness levels. Typically these are in the range
|
||||
from 0 to 255, but any range starting at 0 will do. The actual brightness
|
||||
level (PWM duty cycle) will be interpolated from these values. 0 means a
|
||||
0% duty cycle (darkest/off), while the last value in the array represents
|
||||
a 100% duty cycle (brightest).
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
|
||||
default-brightness-level:
|
||||
description:
|
||||
The default brightness level (index into the array defined by the
|
||||
"brightness-levels" property).
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
num-interpolated-steps:
|
||||
description:
|
||||
Number of interpolated steps between each value of brightness-levels
|
||||
table. This way a high resolution pwm duty cycle can be used without
|
||||
having to list out every possible value in the brightness-level array.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
dependencies:
|
||||
default-brightness-level: [brightness-levels]
|
||||
num-interpolated-steps: [brightness-levels]
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- pwms
|
||||
- power-supply
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm 0 5000000>;
|
||||
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <6>;
|
||||
|
||||
power-supply = <&vdd_bl_reg>;
|
||||
enable-gpios = <&gpio 58 0>;
|
||||
post-pwm-on-delay-ms = <10>;
|
||||
pwm-off-delay-ms = <10>;
|
||||
};
|
||||
|
||||
- |
|
||||
// Example using num-interpolation-steps:
|
||||
backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm 0 5000000>;
|
||||
|
||||
brightness-levels = <0 2048 4096 8192 16384 65535>;
|
||||
num-interpolated-steps = <2048>;
|
||||
default-brightness-level = <4096>;
|
||||
|
||||
power-supply = <&vdd_bl_reg>;
|
||||
enable-gpios = <&gpio 58 0>;
|
||||
};
|
||||
|
||||
...
|
||||
|
|
@ -1,49 +0,0 @@
|
|||
* Analog Devices ADV7180 analog video decoder family
|
||||
|
||||
The adv7180 family devices are used to capture analog video to different
|
||||
digital interfaces like MIPI CSI-2 or parallel video.
|
||||
|
||||
Required Properties :
|
||||
- compatible : value must be one of
|
||||
"adi,adv7180"
|
||||
"adi,adv7180cp"
|
||||
"adi,adv7180st"
|
||||
"adi,adv7182"
|
||||
"adi,adv7280"
|
||||
"adi,adv7280-m"
|
||||
"adi,adv7281"
|
||||
"adi,adv7281-m"
|
||||
"adi,adv7281-ma"
|
||||
"adi,adv7282"
|
||||
"adi,adv7282-m"
|
||||
|
||||
Device nodes of "adi,adv7180cp" and "adi,adv7180st" must contain one
|
||||
'port' child node per device input and output port, in accordance with the
|
||||
video interface bindings defined in
|
||||
Documentation/devicetree/bindings/media/video-interfaces.txt. The port
|
||||
nodes are numbered as follows.
|
||||
|
||||
Port adv7180cp adv7180st
|
||||
-------------------------------------------------------------------
|
||||
Input 0-2 0-5
|
||||
Output 3 6
|
||||
|
||||
The digital output port node must contain at least one endpoint.
|
||||
|
||||
Optional Properties :
|
||||
- powerdown-gpios: reference to the GPIO connected to the powerdown pin,
|
||||
if any.
|
||||
|
||||
|
||||
Example:
|
||||
|
||||
i2c0@1c22000 {
|
||||
...
|
||||
...
|
||||
adv7180@21 {
|
||||
compatible = "adi,adv7180";
|
||||
reg = <0x21>;
|
||||
};
|
||||
...
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1,184 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/media/i2c/adv7180.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Analog Devices ADV7180 analog video decoder family
|
||||
|
||||
maintainers:
|
||||
- Lars-Peter Clausen <lars@metafoo.de>
|
||||
|
||||
description:
|
||||
The adv7180 family devices are used to capture analog video to different
|
||||
digital interfaces like MIPI CSI-2 or parallel video.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
items:
|
||||
- enum:
|
||||
- adi,adv7180
|
||||
- adi,adv7180cp
|
||||
- adi,adv7180st
|
||||
- adi,adv7182
|
||||
- adi,adv7280
|
||||
- adi,adv7280-m
|
||||
- adi,adv7281
|
||||
- adi,adv7281-m
|
||||
- adi,adv7281-ma
|
||||
- adi,adv7282
|
||||
- adi,adv7282-m
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
powerdown-gpios:
|
||||
maxItems: 1
|
||||
|
||||
port:
|
||||
type: object
|
||||
description:
|
||||
A node containing a single endpoint as doucmented in
|
||||
Documentation/devicetree/bindings/media/video-interfaces.txt
|
||||
|
||||
ports:
|
||||
type: object
|
||||
description:
|
||||
A node containing input and output port nodes with endpoint definitions
|
||||
as documented in
|
||||
Documentation/devicetree/bindings/media/video-interfaces.txt
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
items:
|
||||
- enum:
|
||||
- adi,adv7180
|
||||
- adi,adv7182
|
||||
- adi,adv7280
|
||||
- adi,adv7280-m
|
||||
- adi,adv7281
|
||||
- adi,adv7281-m
|
||||
- adi,adv7281-ma
|
||||
- adi,adv7282
|
||||
- adi,adv7282-m
|
||||
then:
|
||||
required:
|
||||
- port
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: adi,adv7180cp
|
||||
then:
|
||||
properties:
|
||||
ports:
|
||||
properties:
|
||||
'#address-cells':
|
||||
const: 1
|
||||
'#size-cells':
|
||||
const: 0
|
||||
port@3:
|
||||
type: object
|
||||
description: Output port
|
||||
|
||||
patternProperties:
|
||||
"^port@[0-2]$":
|
||||
type: object
|
||||
description: Input port
|
||||
|
||||
required:
|
||||
- port@3
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- ports
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: adi,adv7180st
|
||||
then:
|
||||
properties:
|
||||
ports:
|
||||
properties:
|
||||
'#address-cells':
|
||||
const: 1
|
||||
'#size-cells':
|
||||
const: 0
|
||||
port@6:
|
||||
type: object
|
||||
description: Output port
|
||||
|
||||
patternProperties:
|
||||
"^port@[0-5]$":
|
||||
type: object
|
||||
description: Input port
|
||||
|
||||
required:
|
||||
- port@6
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- ports
|
||||
|
||||
examples:
|
||||
- |
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
composite-in@20 {
|
||||
compatible = "adi,adv7180";
|
||||
reg = <0x20>;
|
||||
|
||||
port {
|
||||
adv7180: endpoint {
|
||||
bus-width = <8>;
|
||||
remote-endpoint = <&vin1ep>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
- |
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
composite-in@20 {
|
||||
compatible = "adi,adv7180cp";
|
||||
reg = <0x20>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7180_in: endpoint {
|
||||
remote-endpoint = <&composite_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
adv7180_out: endpoint {
|
||||
remote-endpoint = <&vin4_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -13,6 +13,11 @@ Required Properties:
|
|||
|
||||
Optional Properties:
|
||||
- reset-gpios: Sensor reset GPIO
|
||||
- clocks: Reference to the input clock.
|
||||
- clock-names: Should be "inck".
|
||||
- VANA-supply: Sensor 2.8v analog supply.
|
||||
- VDIG-supply: Sensor 1.8v digital core supply.
|
||||
- VDDL-supply: Sensor digital IO 1.2v supply.
|
||||
|
||||
The imx274 device node should contain one 'port' child node with
|
||||
an 'endpoint' subnode. For further reading on port node refer to
|
||||
|
|
|
|||
|
|
@ -32,4 +32,4 @@ The following properties are common to all Xilinx video IP cores.
|
|||
defaults to "mono".
|
||||
|
||||
|
||||
[UG934] http://www.xilinx.com/support/documentation/ip_documentation/axi_videoip/v1_0/ug934_axi_videoIP.pdf
|
||||
[UG934] https://www.xilinx.com/support/documentation/ip_documentation/axi_videoip/v1_0/ug934_axi_videoIP.pdf
|
||||
|
|
|
|||
|
|
@ -1,35 +0,0 @@
|
|||
Freescale Multi Mode DDR controller (MMDC)
|
||||
|
||||
Required properties :
|
||||
- compatible : should be one of following:
|
||||
for i.MX6Q/i.MX6DL:
|
||||
- "fsl,imx6q-mmdc";
|
||||
for i.MX6QP:
|
||||
- "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc";
|
||||
for i.MX6SL:
|
||||
- "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc";
|
||||
for i.MX6SLL:
|
||||
- "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
|
||||
for i.MX6SX:
|
||||
- "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
|
||||
for i.MX6UL/i.MX6ULL/i.MX6ULZ:
|
||||
- "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
|
||||
for i.MX7ULP:
|
||||
- "fsl,imx7ulp-mmdc", "fsl,imx6q-mmdc";
|
||||
- reg : address and size of MMDC DDR controller registers
|
||||
|
||||
Optional properties :
|
||||
- clocks : the clock provided by the SoC to access the MMDC registers
|
||||
|
||||
Example :
|
||||
mmdc0: memory-controller@21b0000 { /* MMDC0 */
|
||||
compatible = "fsl,imx6q-mmdc";
|
||||
reg = <0x021b0000 0x4000>;
|
||||
clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>;
|
||||
};
|
||||
|
||||
mmdc1: memory-controller@21b4000 { /* MMDC1 */
|
||||
compatible = "fsl,imx6q-mmdc";
|
||||
reg = <0x021b4000 0x4000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -0,0 +1,49 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/memory-controllers/fsl/mmdc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Freescale Multi Mode DDR controller (MMDC)
|
||||
|
||||
maintainers:
|
||||
- Anson Huang <Anson.Huang@nxp.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: fsl,imx6q-mmdc
|
||||
- items:
|
||||
- enum:
|
||||
- fsl,imx6qp-mmdc
|
||||
- fsl,imx6sl-mmdc
|
||||
- fsl,imx6sll-mmdc
|
||||
- fsl,imx6sx-mmdc
|
||||
- fsl,imx6ul-mmdc
|
||||
- fsl,imx7ulp-mmdc
|
||||
- const: fsl,imx6q-mmdc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/imx6qdl-clock.h>
|
||||
|
||||
memory-controller@21b0000 {
|
||||
compatible = "fsl,imx6q-mmdc";
|
||||
reg = <0x021b0000 0x4000>;
|
||||
clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>;
|
||||
};
|
||||
|
||||
memory-controller@21b4000 {
|
||||
compatible = "fsl,imx6q-mmdc";
|
||||
reg = <0x021b4000 0x4000>;
|
||||
};
|
||||
|
|
@ -37,7 +37,7 @@ syscon as a means to arbitrate access.
|
|||
|
||||
[0] http://www.intel.com/design/chipsets/industry/25128901.pdf
|
||||
[1] https://www.renesas.com/en-sg/doc/products/mpumcu/001/rej09b0078_h8s2168.pdf?key=7c88837454702128622bee53acbda8f4
|
||||
[2] http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmi-second-gen-interface-spec-v2-rev1-1.pdf
|
||||
[2] https://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmi-second-gen-interface-spec-v2-rev1-1.pdf
|
||||
[3] https://en.wikipedia.org/wiki/Super_I/O
|
||||
|
||||
Required properties
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
* Dialog DA9062 Power Management Integrated Circuit (PMIC)
|
||||
|
||||
Product information for the DA9062 and DA9061 devices can be found here:
|
||||
- http://www.dialog-semiconductor.com/products/da9062
|
||||
- http://www.dialog-semiconductor.com/products/da9061
|
||||
- https://www.dialog-semiconductor.com/products/da9062
|
||||
- https://www.dialog-semiconductor.com/products/da9061
|
||||
|
||||
The DA9062 PMIC consists of:
|
||||
|
||||
|
|
|
|||
|
|
@ -45,7 +45,8 @@ properties:
|
|||
|
||||
- contains:
|
||||
const: syscon
|
||||
additionalItems: true
|
||||
minItems: 2
|
||||
maxItems: 4 # Should be enough
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
|
|
|||
|
|
@ -1,23 +0,0 @@
|
|||
OLPC XO-1.75 Embedded Controller
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "olpc,xo1.75-ec".
|
||||
- cmd-gpios: gpio specifier of the CMD pin
|
||||
|
||||
The embedded controller requires the SPI controller driver to signal readiness
|
||||
to receive a transfer (that is, when TX FIFO contains the response data) by
|
||||
strobing the ACK pin with the ready signal. See the "ready-gpios" property of the
|
||||
SSP binding as documented in:
|
||||
<Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml>.
|
||||
|
||||
Example:
|
||||
&ssp3 {
|
||||
spi-slave;
|
||||
ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
slave {
|
||||
compatible = "olpc,xo1.75-ec";
|
||||
spi-cpha;
|
||||
cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,52 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
# Copyright (C) 2019,2020 Lubomir Rintel <lkundrak@v3.sk>
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/misc/olpc,xo1.75-ec.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: OLPC XO-1.75 Embedded Controller bindings
|
||||
|
||||
description: |
|
||||
This binding describes the Embedded Controller acting as a SPI bus master
|
||||
on a OLPC XO-1.75 laptop computer.
|
||||
|
||||
The embedded controller requires the SPI controller driver to signal
|
||||
readiness to receive a transfer (that is, when TX FIFO contains the
|
||||
response data) by strobing the ACK pin with the ready signal. See the
|
||||
"ready-gpios" property of the SSP binding as documented in:
|
||||
<Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml>.
|
||||
|
||||
maintainers:
|
||||
- Lubomir Rintel <lkundrak@v3.sk>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: olpc,xo1.75-ec
|
||||
|
||||
cmd-gpios:
|
||||
description: GPIO uspecifier of the CMD pin
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- cmd-gpios
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
spi {
|
||||
spi-slave;
|
||||
ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
slave {
|
||||
compatible = "olpc,xo1.75-ec";
|
||||
spi-cpha;
|
||||
cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
|
|
@ -1,67 +0,0 @@
|
|||
* Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX
|
||||
|
||||
The Enhanced Secure Digital Host Controller on Freescale i.MX family
|
||||
provides an interface for MMC, SD, and SDIO types of memory cards.
|
||||
|
||||
This file documents differences between the core properties described
|
||||
by mmc.txt and the properties used by the sdhci-esdhc-imx driver.
|
||||
|
||||
Required properties:
|
||||
- compatible : Should be "fsl,<chip>-esdhc", the supported chips include
|
||||
"fsl,imx25-esdhc"
|
||||
"fsl,imx35-esdhc"
|
||||
"fsl,imx51-esdhc"
|
||||
"fsl,imx53-esdhc"
|
||||
"fsl,imx6q-usdhc"
|
||||
"fsl,imx6sl-usdhc"
|
||||
"fsl,imx6sx-usdhc"
|
||||
"fsl,imx6ull-usdhc"
|
||||
"fsl,imx7d-usdhc"
|
||||
"fsl,imx7ulp-usdhc"
|
||||
"fsl,imx8mq-usdhc"
|
||||
"fsl,imx8mm-usdhc"
|
||||
"fsl,imx8mn-usdhc"
|
||||
"fsl,imx8mp-usdhc"
|
||||
"fsl,imx8qm-usdhc"
|
||||
"fsl,imx8qxp-usdhc"
|
||||
|
||||
Optional properties:
|
||||
- fsl,wp-controller : Indicate to use controller internal write protection
|
||||
- fsl,delay-line : Specify the number of delay cells for override mode.
|
||||
This is used to set the clock delay for DLL(Delay Line) on override mode
|
||||
to select a proper data sampling window in case the clock quality is not good
|
||||
due to signal path is too long on the board. Please refer to eSDHC/uSDHC
|
||||
chapter, DLL (Delay Line) section in RM for details.
|
||||
- voltage-ranges : Specify the voltage range in case there are software
|
||||
transparent level shifters on the outputs of the controller. Two cells are
|
||||
required, first cell specifies minimum slot voltage (mV), second cell
|
||||
specifies maximum slot voltage (mV). Several ranges could be specified.
|
||||
- fsl,tuning-start-tap: Specify the start dealy cell point when send first CMD19
|
||||
in tuning procedure.
|
||||
- fsl,tuning-step: Specify the increasing delay cell steps in tuning procedure.
|
||||
The uSDHC use one delay cell as default increasing step to do tuning process.
|
||||
This property allows user to change the tuning step to more than one delay
|
||||
cells which is useful for some special boards or cards when the default
|
||||
tuning step can't find the proper delay window within limited tuning retries.
|
||||
- fsl,strobe-dll-delay-target: Specify the strobe dll control slave delay target.
|
||||
This delay target programming host controller loopback read clock, and this
|
||||
property allows user to change the delay target for the strobe input read clock.
|
||||
If not use this property, driver default set the delay target to value 7.
|
||||
Only eMMC HS400 mode need to take care of this property.
|
||||
|
||||
Examples:
|
||||
|
||||
esdhc@70004000 {
|
||||
compatible = "fsl,imx51-esdhc";
|
||||
reg = <0x70004000 0x4000>;
|
||||
interrupts = <1>;
|
||||
fsl,wp-controller;
|
||||
};
|
||||
|
||||
esdhc@70008000 {
|
||||
compatible = "fsl,imx51-esdhc";
|
||||
reg = <0x70008000 0x4000>;
|
||||
interrupts = <2>;
|
||||
cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
|
||||
wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */
|
||||
};
|
||||
|
|
@ -0,0 +1,124 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/mmc/fsl-imx-esdhc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX
|
||||
|
||||
maintainers:
|
||||
- Shawn Guo <shawn.guo@linaro.org>
|
||||
|
||||
allOf:
|
||||
- $ref: "mmc-controller.yaml"
|
||||
|
||||
description: |
|
||||
The Enhanced Secure Digital Host Controller on Freescale i.MX family
|
||||
provides an interface for MMC, SD, and SDIO types of memory cards.
|
||||
|
||||
This file documents differences between the core properties described
|
||||
by mmc.txt and the properties used by the sdhci-esdhc-imx driver.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- fsl,imx25-esdhc
|
||||
- fsl,imx35-esdhc
|
||||
- fsl,imx51-esdhc
|
||||
- fsl,imx53-esdhc
|
||||
- fsl,imx6q-usdhc
|
||||
- fsl,imx6sl-usdhc
|
||||
- fsl,imx6sx-usdhc
|
||||
- fsl,imx6ull-usdhc
|
||||
- fsl,imx7d-usdhc
|
||||
- fsl,imx7ulp-usdhc
|
||||
- fsl,imx8mq-usdhc
|
||||
- fsl,imx8mm-usdhc
|
||||
- fsl,imx8mn-usdhc
|
||||
- fsl,imx8mp-usdhc
|
||||
- fsl,imx8qm-usdhc
|
||||
- fsl,imx8qxp-usdhc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
fsl,wp-controller:
|
||||
description: |
|
||||
boolean, if present, indicate to use controller internal write protection.
|
||||
type: boolean
|
||||
|
||||
fsl,delay-line:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: |
|
||||
Specify the number of delay cells for override mode.
|
||||
This is used to set the clock delay for DLL(Delay Line) on override mode
|
||||
to select a proper data sampling window in case the clock quality is not good
|
||||
due to signal path is too long on the board. Please refer to eSDHC/uSDHC
|
||||
chapter, DLL (Delay Line) section in RM for details.
|
||||
default: 0
|
||||
|
||||
voltage-ranges:
|
||||
$ref: '/schemas/types.yaml#/definitions/uint32-matrix'
|
||||
description: |
|
||||
Specify the voltage range in case there are software transparent level
|
||||
shifters on the outputs of the controller. Two cells are required, first
|
||||
cell specifies minimum slot voltage (mV), second cell specifies maximum
|
||||
slot voltage (mV).
|
||||
items:
|
||||
items:
|
||||
- description: value for minimum slot voltage
|
||||
- description: value for maximum slot voltage
|
||||
maxItems: 1
|
||||
|
||||
fsl,tuning-start-tap:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: |
|
||||
Specify the start delay cell point when send first CMD19 in tuning procedure.
|
||||
default: 0
|
||||
|
||||
fsl,tuning-step:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: |
|
||||
Specify the increasing delay cell steps in tuning procedure.
|
||||
The uSDHC use one delay cell as default increasing step to do tuning process.
|
||||
This property allows user to change the tuning step to more than one delay
|
||||
cells which is useful for some special boards or cards when the default
|
||||
tuning step can't find the proper delay window within limited tuning retries.
|
||||
default: 0
|
||||
|
||||
fsl,strobe-dll-delay-target:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: |
|
||||
Specify the strobe dll control slave delay target.
|
||||
This delay target programming host controller loopback read clock, and this
|
||||
property allows user to change the delay target for the strobe input read clock.
|
||||
If not use this property, driver default set the delay target to value 7.
|
||||
Only eMMC HS400 mode need to take care of this property.
|
||||
default: 0
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
mmc@70004000 {
|
||||
compatible = "fsl,imx51-esdhc";
|
||||
reg = <0x70004000 0x4000>;
|
||||
interrupts = <1>;
|
||||
fsl,wp-controller;
|
||||
};
|
||||
|
||||
mmc@70008000 {
|
||||
compatible = "fsl,imx51-esdhc";
|
||||
reg = <0x70008000 0x4000>;
|
||||
interrupts = <2>;
|
||||
cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
|
||||
wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */
|
||||
};
|
||||
|
|
@ -1,23 +0,0 @@
|
|||
* Freescale Secure Digital Host Controller for i.MX2/3 series
|
||||
|
||||
This file documents differences to the properties defined in mmc.txt.
|
||||
|
||||
Required properties:
|
||||
- compatible : Should be "fsl,<chip>-mmc", chip can be imx21 or imx31
|
||||
|
||||
Optional properties:
|
||||
- dmas: One DMA phandle with arguments as defined by the devicetree bindings
|
||||
of the used DMA controller.
|
||||
- dma-names: Has to be "rx-tx".
|
||||
|
||||
Example:
|
||||
|
||||
sdhci1: sdhci@10014000 {
|
||||
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
|
||||
reg = <0x10014000 0x1000>;
|
||||
interrupts = <11>;
|
||||
dmas = <&dma 7>;
|
||||
dma-names = "rx-tx";
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&gpio3 29>;
|
||||
};
|
||||
|
|
@ -0,0 +1,53 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/mmc/fsl-imx-mmc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Freescale Secure Digital Host Controller for i.MX2/3 series
|
||||
|
||||
maintainers:
|
||||
- Markus Pargmann <mpa@pengutronix.de>
|
||||
|
||||
allOf:
|
||||
- $ref: "mmc-controller.yaml"
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: fsl,imx21-mmc
|
||||
- const: fsl,imx31-mmc
|
||||
- items:
|
||||
- const: fsl,imx27-mmc
|
||||
- const: fsl,imx21-mmc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
dmas:
|
||||
maxItems: 1
|
||||
|
||||
dma-names:
|
||||
const: rx-tx
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
mmc@10014000 {
|
||||
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
|
||||
reg = <0x10014000 0x1000>;
|
||||
interrupts = <11>;
|
||||
dmas = <&dma 7>;
|
||||
dma-names = "rx-tx";
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&gpio3 29>;
|
||||
};
|
||||
|
|
@ -1,27 +0,0 @@
|
|||
* Freescale MXS MMC controller
|
||||
|
||||
The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller
|
||||
to support MMC, SD, and SDIO types of memory cards.
|
||||
|
||||
This file documents differences between the core properties in mmc.txt
|
||||
and the properties used by the mxsmmc driver.
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "fsl,<chip>-mmc". The supported chips include
|
||||
imx23 and imx28.
|
||||
- interrupts: Should contain ERROR interrupt number
|
||||
- dmas: DMA specifier, consisting of a phandle to DMA controller node
|
||||
and SSP DMA channel ID.
|
||||
Refer to dma.txt and fsl-mxs-dma.txt for details.
|
||||
- dma-names: Must be "rx-tx".
|
||||
|
||||
Examples:
|
||||
|
||||
ssp0: ssp@80010000 {
|
||||
compatible = "fsl,imx28-mmc";
|
||||
reg = <0x80010000 2000>;
|
||||
interrupts = <96>;
|
||||
dmas = <&dma_apbh 0>;
|
||||
dma-names = "rx-tx";
|
||||
bus-width = <8>;
|
||||
};
|
||||
|
|
@ -0,0 +1,58 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/mmc/mxs-mmc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Freescale MXS MMC controller
|
||||
|
||||
maintainers:
|
||||
- Shawn Guo <shawn.guo@linaro.org>
|
||||
|
||||
description: |
|
||||
The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller
|
||||
to support MMC, SD, and SDIO types of memory cards.
|
||||
|
||||
This file documents differences between the core properties in mmc.txt
|
||||
and the properties used by the mxsmmc driver.
|
||||
|
||||
allOf:
|
||||
- $ref: "mmc-controller.yaml"
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- fsl,imx23-mmc
|
||||
- fsl,imx28-mmc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
dmas:
|
||||
maxItems: 1
|
||||
|
||||
dma-names:
|
||||
const: rx-tx
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- dmas
|
||||
- dma-names
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
mmc@80010000 {
|
||||
compatible = "fsl,imx28-mmc";
|
||||
reg = <0x80010000 2000>;
|
||||
interrupts = <96>;
|
||||
dmas = <&dma_apbh 0>;
|
||||
dma-names = "rx-tx";
|
||||
bus-width = <8>;
|
||||
};
|
||||
|
|
@ -1,75 +0,0 @@
|
|||
* Freescale General-Purpose Media Interface (GPMI)
|
||||
|
||||
The GPMI nand controller provides an interface to control the
|
||||
NAND flash chips.
|
||||
|
||||
Required properties:
|
||||
- compatible : should be "fsl,<chip>-gpmi-nand", chip can be:
|
||||
* imx23
|
||||
* imx28
|
||||
* imx6q
|
||||
* imx6sx
|
||||
* imx7d
|
||||
- reg : should contain registers location and length for gpmi and bch.
|
||||
- reg-names: Should contain the reg names "gpmi-nand" and "bch"
|
||||
- interrupts : BCH interrupt number.
|
||||
- interrupt-names : Should be "bch".
|
||||
- dmas: DMA specifier, consisting of a phandle to DMA controller node
|
||||
and GPMI DMA channel ID.
|
||||
Refer to dma.txt and fsl-mxs-dma.txt for details.
|
||||
- dma-names: Must be "rx-tx".
|
||||
- clocks : clocks phandle and clock specifier corresponding to each clock
|
||||
specified in clock-names.
|
||||
- clock-names : The "gpmi_io" clock is always required. Which clocks are
|
||||
exactly required depends on chip:
|
||||
* imx23/imx28 : "gpmi_io"
|
||||
* imx6q/sx : "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch"
|
||||
* imx7d : "gpmi_io", "gpmi_bch_apb"
|
||||
|
||||
Optional properties:
|
||||
- nand-on-flash-bbt: boolean to enable on flash bbt option if not
|
||||
present false
|
||||
- fsl,use-minimum-ecc: Protect this NAND flash with the minimum ECC
|
||||
strength required. The required ECC strength is
|
||||
automatically discoverable for some flash
|
||||
(e.g., according to the ONFI standard).
|
||||
However, note that if this strength is not
|
||||
discoverable or this property is not enabled,
|
||||
the software may chooses an implementation-defined
|
||||
ECC scheme.
|
||||
- fsl,no-blockmark-swap: Don't swap the bad block marker from the OOB
|
||||
area with the byte in the data area but rely on the
|
||||
flash based BBT for identifying bad blocks.
|
||||
NOTE: this is only valid in conjunction with
|
||||
'nand-on-flash-bbt'.
|
||||
WARNING: on i.MX28 blockmark swapping cannot be
|
||||
disabled for the BootROM in the FCB. Thus,
|
||||
partitions written from Linux with this feature
|
||||
turned on may not be accessible by the BootROM
|
||||
code.
|
||||
- nand-ecc-strength: integer representing the number of bits to correct
|
||||
per ECC step. Needs to be a multiple of 2.
|
||||
- nand-ecc-step-size: integer representing the number of data bytes
|
||||
that are covered by a single ECC step. The driver
|
||||
supports 512 and 1024.
|
||||
|
||||
The device tree may optionally contain sub-nodes describing partitions of the
|
||||
address space. See partition.txt for more detail.
|
||||
|
||||
Examples:
|
||||
|
||||
gpmi-nand@8000c000 {
|
||||
compatible = "fsl,imx28-gpmi-nand";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x8000c000 2000>, <0x8000a000 2000>;
|
||||
reg-names = "gpmi-nand", "bch";
|
||||
interrupts = <41>;
|
||||
interrupt-names = "bch";
|
||||
dmas = <&dma_apbh 4>;
|
||||
dma-names = "rx-tx";
|
||||
|
||||
partition@0 {
|
||||
...
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,118 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Freescale General-Purpose Media Interface (GPMI) binding
|
||||
|
||||
maintainers:
|
||||
- Han Xu <han.xu@nxp.com>
|
||||
|
||||
allOf:
|
||||
- $ref: "nand-controller.yaml"
|
||||
|
||||
description: |
|
||||
The GPMI nand controller provides an interface to control the NAND
|
||||
flash chips. The device tree may optionally contain sub-nodes
|
||||
describing partitions of the address space. See partition.txt for
|
||||
more detail.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- fsl,imx23-gpmi-nand
|
||||
- fsl,imx28-gpmi-nand
|
||||
- fsl,imx6q-gpmi-nand
|
||||
- fsl,imx6sx-gpmi-nand
|
||||
- fsl,imx7d-gpmi-nand
|
||||
|
||||
reg:
|
||||
items:
|
||||
- description: Address and length of gpmi block.
|
||||
- description: Address and length of bch block.
|
||||
|
||||
reg-names:
|
||||
items:
|
||||
- const: gpmi-nand
|
||||
- const: bch
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-names:
|
||||
const: bch
|
||||
|
||||
dmas:
|
||||
maxItems: 1
|
||||
|
||||
dma-names:
|
||||
const: rx-tx
|
||||
|
||||
clocks:
|
||||
minItems: 1
|
||||
maxItems: 5
|
||||
items:
|
||||
- description: SoC gpmi io clock
|
||||
- description: SoC gpmi apb clock
|
||||
- description: SoC gpmi bch clock
|
||||
- description: SoC gpmi bch apb clock
|
||||
- description: SoC per1 bch clock
|
||||
|
||||
clock-names:
|
||||
minItems: 1
|
||||
maxItems: 5
|
||||
items:
|
||||
- const: gpmi_io
|
||||
- const: gpmi_apb
|
||||
- const: gpmi_bch
|
||||
- const: gpmi_bch_apb
|
||||
- const: per1_bch
|
||||
|
||||
fsl,use-minimum-ecc:
|
||||
type: boolean
|
||||
description: |
|
||||
Protect this NAND flash with the minimum ECC strength required.
|
||||
The required ECC strength is automatically discoverable for some
|
||||
flash (e.g., according to the ONFI standard). However, note that
|
||||
if this strength is not discoverable or this property is not enabled,
|
||||
the software may chooses an implementation-defined ECC scheme.
|
||||
|
||||
fsl,no-blockmark-swap:
|
||||
type: boolean
|
||||
description: |
|
||||
Don't swap the bad block marker from the OOB area with the byte in
|
||||
the data area but rely on the flash based BBT for identifying bad blocks.
|
||||
NOTE: this is only valid in conjunction with 'nand-on-flash-bbt'.
|
||||
WARNING: on i.MX28 blockmark swapping cannot be disabled for the BootROM
|
||||
in the FCB. Thus, partitions written from Linux with this feature turned
|
||||
on may not be accessible by the BootROM code.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- reg-names
|
||||
- interrupts
|
||||
- interrupt-names
|
||||
- clocks
|
||||
- clock-names
|
||||
- dmas
|
||||
- dma-names
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
nand-controller@8000c000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,imx28-gpmi-nand";
|
||||
reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
|
||||
reg-names = "gpmi-nand", "bch";
|
||||
interrupts = <41>;
|
||||
interrupt-names = "bch";
|
||||
clocks = <&clks 50>;
|
||||
clock-names = "gpmi_io";
|
||||
dmas = <&dma_apbh 4>;
|
||||
dma-names = "rx-tx";
|
||||
};
|
||||
|
|
@ -1,19 +0,0 @@
|
|||
* Freescale's mxc_nand
|
||||
|
||||
Required properties:
|
||||
- compatible: "fsl,imxXX-nand"
|
||||
- reg: address range of the nfc block
|
||||
- interrupts: irq to be used
|
||||
- nand-bus-width: see nand-controller.yaml
|
||||
- nand-ecc-mode: see nand-controller.yaml
|
||||
- nand-on-flash-bbt: see nand-controller.yaml
|
||||
|
||||
Example:
|
||||
|
||||
nand@d8000000 {
|
||||
compatible = "fsl,imx27-nand";
|
||||
reg = <0xd8000000 0x1000>;
|
||||
interrupts = <29>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "hw";
|
||||
};
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/mtd/mxc-nand.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Freescale's mxc_nand binding
|
||||
|
||||
maintainers:
|
||||
- Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
||||
|
||||
allOf:
|
||||
- $ref: "nand-controller.yaml"
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: fsl,imx27-nand
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
nand-controller@d8000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,imx27-nand";
|
||||
reg = <0xd8000000 0x1000>;
|
||||
interrupts = <29>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "hw";
|
||||
};
|
||||
|
|
@ -0,0 +1,104 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/phy/ti,phy-gmii-sel.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
|
||||
title: CPSW Port's Interface Mode Selection PHY Tree Bindings
|
||||
|
||||
maintainers:
|
||||
- Kishon Vijay Abraham I <kishon@ti.com>
|
||||
|
||||
description: |
|
||||
TI am335x/am437x/dra7(am5)/dm814x CPSW3G Ethernet Subsystem supports
|
||||
two 10/100/1000 Ethernet ports with selectable G/MII, RMII, and RGMII interfaces.
|
||||
The interface mode is selected by configuring the MII mode selection register(s)
|
||||
(GMII_SEL) in the System Control Module chapter (SCM). GMII_SEL register(s) and
|
||||
bit fields placement in SCM are different between SoCs while fields meaning
|
||||
is the same.
|
||||
+--------------+
|
||||
+-------------------------------+ |SCM |
|
||||
| CPSW | | +---------+ |
|
||||
| +--------------------------------+gmii_sel | |
|
||||
| | | | +---------+ |
|
||||
| +----v---+ +--------+ | +--------------+
|
||||
| |Port 1..<--+-->GMII/MII<------->
|
||||
| | | | | | |
|
||||
| +--------+ | +--------+ |
|
||||
| | |
|
||||
| | +--------+ |
|
||||
| | | RMII <------->
|
||||
| +--> | |
|
||||
| | +--------+ |
|
||||
| | |
|
||||
| | +--------+ |
|
||||
| | | RGMII <------->
|
||||
| +--> | |
|
||||
| +--------+ |
|
||||
+-------------------------------+
|
||||
|
||||
CPSW Port's Interface Mode Selection PHY describes MII interface mode between
|
||||
CPSW Port and Ethernet PHY which depends on Eth PHY and board configuration.
|
||||
|
|
||||
CPSW Port's Interface Mode Selection PHY device should defined as child device
|
||||
of SCM node (scm_conf) and can be attached to each CPSW port node using standard
|
||||
PHY bindings.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- ti,am3352-phy-gmii-sel
|
||||
- ti,dra7xx-phy-gmii-sel
|
||||
- ti,am43xx-phy-gmii-sel
|
||||
- ti,dm814-phy-gmii-sel
|
||||
- ti,am654-phy-gmii-sel
|
||||
|
||||
reg:
|
||||
description: Address and length of the register set for the device
|
||||
|
||||
'#phy-cells': true
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- ti,dra7xx-phy-gmii-sel
|
||||
- ti,dm814-phy-gmii-sel
|
||||
- ti,am654-phy-gmii-sel
|
||||
then:
|
||||
properties:
|
||||
'#phy-cells':
|
||||
const: 1
|
||||
description: CPSW port number (starting from 1)
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- ti,am3352-phy-gmii-sel
|
||||
- ti,am43xx-phy-gmii-sel
|
||||
then:
|
||||
properties:
|
||||
'#phy-cells':
|
||||
const: 2
|
||||
description: |
|
||||
- CPSW port number (starting from 1)
|
||||
- RMII refclk mode
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- '#phy-cells'
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
phy_gmii_sel: phy-gmii-sel@650 {
|
||||
compatible = "ti,am3352-phy-gmii-sel";
|
||||
reg = <0x650 0x4>;
|
||||
#phy-cells = <2>;
|
||||
};
|
||||
|
|
@ -1,69 +0,0 @@
|
|||
CPSW Port's Interface Mode Selection PHY Tree Bindings
|
||||
-----------------------------------------------
|
||||
|
||||
TI am335x/am437x/dra7(am5)/dm814x CPSW3G Ethernet Subsystem supports
|
||||
two 10/100/1000 Ethernet ports with selectable G/MII, RMII, and RGMII interfaces.
|
||||
The interface mode is selected by configuring the MII mode selection register(s)
|
||||
(GMII_SEL) in the System Control Module chapter (SCM). GMII_SEL register(s) and
|
||||
bit fields placement in SCM are different between SoCs while fields meaning
|
||||
is the same.
|
||||
+--------------+
|
||||
+-------------------------------+ |SCM |
|
||||
| CPSW | | +---------+ |
|
||||
| +--------------------------------+gmii_sel | |
|
||||
| | | | +---------+ |
|
||||
| +----v---+ +--------+ | +--------------+
|
||||
| |Port 1..<--+-->GMII/MII<------->
|
||||
| | | | | | |
|
||||
| +--------+ | +--------+ |
|
||||
| | |
|
||||
| | +--------+ |
|
||||
| | | RMII <------->
|
||||
| +--> | |
|
||||
| | +--------+ |
|
||||
| | |
|
||||
| | +--------+ |
|
||||
| | | RGMII <------->
|
||||
| +--> | |
|
||||
| +--------+ |
|
||||
+-------------------------------+
|
||||
|
||||
CPSW Port's Interface Mode Selection PHY describes MII interface mode between
|
||||
CPSW Port and Ethernet PHY which depends on Eth PHY and board configuration.
|
||||
|
||||
CPSW Port's Interface Mode Selection PHY device should defined as child device
|
||||
of SCM node (scm_conf) and can be attached to each CPSW port node using standard
|
||||
PHY bindings (See phy/phy-bindings.txt).
|
||||
|
||||
Required properties:
|
||||
- compatible : Should be "ti,am3352-phy-gmii-sel" for am335x platform
|
||||
"ti,dra7xx-phy-gmii-sel" for dra7xx/am57xx platform
|
||||
"ti,am43xx-phy-gmii-sel" for am43xx platform
|
||||
"ti,dm814-phy-gmii-sel" for dm814x platform
|
||||
"ti,am654-phy-gmii-sel" for AM654x/J721E platform
|
||||
- reg : Address and length of the register set for the device
|
||||
- #phy-cells : must be 2.
|
||||
cell 1 - CPSW port number (starting from 1)
|
||||
cell 2 - RMII refclk mode
|
||||
|
||||
Examples:
|
||||
phy_gmii_sel: phy-gmii-sel {
|
||||
compatible = "ti,am3352-phy-gmii-sel";
|
||||
reg = <0x650 0x4>;
|
||||
#phy-cells = <2>;
|
||||
};
|
||||
|
||||
mac: ethernet@4a100000 {
|
||||
compatible = "ti,am335x-cpsw","ti,cpsw";
|
||||
...
|
||||
|
||||
cpsw_emac0: slave@4a100200 {
|
||||
...
|
||||
phys = <&phy_gmii_sel 1 1>;
|
||||
};
|
||||
|
||||
cpsw_emac1: slave@4a100300 {
|
||||
...
|
||||
phys = <&phy_gmii_sel 2 1>;
|
||||
};
|
||||
};
|
||||
|
|
@ -17,6 +17,7 @@ Time/Frequency
|
|||
-ms : millisecond
|
||||
-us : microsecond
|
||||
-ns : nanosecond
|
||||
-ps : picosecond
|
||||
|
||||
Distance
|
||||
----------------------------------------
|
||||
|
|
|
|||
|
|
@ -18,9 +18,6 @@ description: |+
|
|||
|
||||
Be aware that the clocksource driver supports only uniprocessor systems.
|
||||
|
||||
allOf:
|
||||
- $ref: pwm.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
|
|
@ -63,7 +60,8 @@ properties:
|
|||
|
||||
interrupts:
|
||||
description:
|
||||
One interrupt per timer, starting at timer 0.
|
||||
One interrupt per timer, starting at timer 0. Necessary only for SoCs which
|
||||
use PWM clocksource.
|
||||
minItems: 1
|
||||
maxItems: 5
|
||||
|
||||
|
|
@ -88,12 +86,27 @@ required:
|
|||
- clocks
|
||||
- clock-names
|
||||
- compatible
|
||||
- interrupts
|
||||
- "#pwm-cells"
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
allOf:
|
||||
- $ref: pwm.yaml#
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- samsung,s3c2410-pwm
|
||||
- samsung,s3c6400-pwm
|
||||
- samsung,s5p6440-pwm
|
||||
- samsung,s5pc100-pwm
|
||||
then:
|
||||
required:
|
||||
- interrupts
|
||||
|
||||
examples:
|
||||
- |
|
||||
pwm@7f006000 {
|
||||
|
|
|
|||
|
|
@ -0,0 +1,112 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/reset/socionext,uniphier-reset.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: UniPhier reset controller
|
||||
|
||||
maintainers:
|
||||
- Masahiro Yamada <yamada.masahiro@socionext.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- description: System reset
|
||||
enum:
|
||||
- socionext,uniphier-ld4-reset
|
||||
- socionext,uniphier-pro4-reset
|
||||
- socionext,uniphier-sld8-reset
|
||||
- socionext,uniphier-pro5-reset
|
||||
- socionext,uniphier-pxs2-reset
|
||||
- socionext,uniphier-ld6b-reset
|
||||
- socionext,uniphier-ld11-reset
|
||||
- socionext,uniphier-ld20-reset
|
||||
- socionext,uniphier-pxs3-reset
|
||||
- description: Media I/O (MIO) reset, SD reset
|
||||
enum:
|
||||
- socionext,uniphier-ld4-mio-reset
|
||||
- socionext,uniphier-pro4-mio-reset
|
||||
- socionext,uniphier-sld8-mio-reset
|
||||
- socionext,uniphier-pro5-sd-reset
|
||||
- socionext,uniphier-pxs2-sd-reset
|
||||
- socionext,uniphier-ld11-mio-reset
|
||||
- socionext,uniphier-ld11-sd-reset
|
||||
- socionext,uniphier-ld20-sd-reset
|
||||
- socionext,uniphier-pxs3-sd-reset
|
||||
- description: Peripheral reset
|
||||
enum:
|
||||
- socionext,uniphier-ld4-peri-reset
|
||||
- socionext,uniphier-pro4-peri-reset
|
||||
- socionext,uniphier-sld8-peri-reset
|
||||
- socionext,uniphier-pro5-peri-reset
|
||||
- socionext,uniphier-pxs2-peri-reset
|
||||
- socionext,uniphier-ld11-peri-reset
|
||||
- socionext,uniphier-ld20-peri-reset
|
||||
- socionext,uniphier-pxs3-peri-reset
|
||||
- description: Analog signal amplifier reset
|
||||
enum:
|
||||
- socionext,uniphier-ld11-adamv-reset
|
||||
- socionext,uniphier-ld20-adamv-reset
|
||||
|
||||
"#reset-cells":
|
||||
const: 1
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- "#reset-cells"
|
||||
|
||||
examples:
|
||||
- |
|
||||
sysctrl@61840000 {
|
||||
compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon";
|
||||
reg = <0x61840000 0x4000>;
|
||||
|
||||
reset {
|
||||
compatible = "socionext,uniphier-ld11-reset";
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
// other nodes ...
|
||||
};
|
||||
|
||||
- |
|
||||
mioctrl@59810000 {
|
||||
compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon";
|
||||
reg = <0x59810000 0x800>;
|
||||
|
||||
reset {
|
||||
compatible = "socionext,uniphier-ld11-mio-reset";
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
// other nodes ...
|
||||
};
|
||||
|
||||
- |
|
||||
perictrl@59820000 {
|
||||
compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon";
|
||||
reg = <0x59820000 0x200>;
|
||||
|
||||
reset {
|
||||
compatible = "socionext,uniphier-ld11-peri-reset";
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
// other nodes ...
|
||||
};
|
||||
|
||||
- |
|
||||
adamv@57920000 {
|
||||
compatible = "socionext,uniphier-ld11-adamv", "simple-mfd", "syscon";
|
||||
reg = <0x57920000 0x1000>;
|
||||
|
||||
reset {
|
||||
compatible = "socionext,uniphier-ld11-adamv-reset";
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
// other nodes ...
|
||||
};
|
||||
|
|
@ -1,123 +1,4 @@
|
|||
UniPhier reset controller
|
||||
|
||||
|
||||
System reset
|
||||
------------
|
||||
|
||||
Required properties:
|
||||
- compatible: should be one of the following:
|
||||
"socionext,uniphier-ld4-reset" - for LD4 SoC
|
||||
"socionext,uniphier-pro4-reset" - for Pro4 SoC
|
||||
"socionext,uniphier-sld8-reset" - for sLD8 SoC
|
||||
"socionext,uniphier-pro5-reset" - for Pro5 SoC
|
||||
"socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC
|
||||
"socionext,uniphier-ld11-reset" - for LD11 SoC
|
||||
"socionext,uniphier-ld20-reset" - for LD20 SoC
|
||||
"socionext,uniphier-pxs3-reset" - for PXs3 SoC
|
||||
- #reset-cells: should be 1.
|
||||
|
||||
Example:
|
||||
|
||||
sysctrl@61840000 {
|
||||
compatible = "socionext,uniphier-ld11-sysctrl",
|
||||
"simple-mfd", "syscon";
|
||||
reg = <0x61840000 0x4000>;
|
||||
|
||||
reset {
|
||||
compatible = "socionext,uniphier-ld11-reset";
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
other nodes ...
|
||||
};
|
||||
|
||||
|
||||
Media I/O (MIO) reset, SD reset
|
||||
-------------------------------
|
||||
|
||||
Required properties:
|
||||
- compatible: should be one of the following:
|
||||
"socionext,uniphier-ld4-mio-reset" - for LD4 SoC
|
||||
"socionext,uniphier-pro4-mio-reset" - for Pro4 SoC
|
||||
"socionext,uniphier-sld8-mio-reset" - for sLD8 SoC
|
||||
"socionext,uniphier-pro5-sd-reset" - for Pro5 SoC
|
||||
"socionext,uniphier-pxs2-sd-reset" - for PXs2/LD6b SoC
|
||||
"socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO)
|
||||
"socionext,uniphier-ld11-sd-reset" - for LD11 SoC (SD)
|
||||
"socionext,uniphier-ld20-sd-reset" - for LD20 SoC
|
||||
"socionext,uniphier-pxs3-sd-reset" - for PXs3 SoC
|
||||
- #reset-cells: should be 1.
|
||||
|
||||
Example:
|
||||
|
||||
mioctrl@59810000 {
|
||||
compatible = "socionext,uniphier-ld11-mioctrl",
|
||||
"simple-mfd", "syscon";
|
||||
reg = <0x59810000 0x800>;
|
||||
|
||||
reset {
|
||||
compatible = "socionext,uniphier-ld11-mio-reset";
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
other nodes ...
|
||||
};
|
||||
|
||||
|
||||
Peripheral reset
|
||||
----------------
|
||||
|
||||
Required properties:
|
||||
- compatible: should be one of the following:
|
||||
"socionext,uniphier-ld4-peri-reset" - for LD4 SoC
|
||||
"socionext,uniphier-pro4-peri-reset" - for Pro4 SoC
|
||||
"socionext,uniphier-sld8-peri-reset" - for sLD8 SoC
|
||||
"socionext,uniphier-pro5-peri-reset" - for Pro5 SoC
|
||||
"socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC
|
||||
"socionext,uniphier-ld11-peri-reset" - for LD11 SoC
|
||||
"socionext,uniphier-ld20-peri-reset" - for LD20 SoC
|
||||
"socionext,uniphier-pxs3-peri-reset" - for PXs3 SoC
|
||||
- #reset-cells: should be 1.
|
||||
|
||||
Example:
|
||||
|
||||
perictrl@59820000 {
|
||||
compatible = "socionext,uniphier-ld11-perictrl",
|
||||
"simple-mfd", "syscon";
|
||||
reg = <0x59820000 0x200>;
|
||||
|
||||
reset {
|
||||
compatible = "socionext,uniphier-ld11-peri-reset";
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
other nodes ...
|
||||
};
|
||||
|
||||
|
||||
Analog signal amplifier reset
|
||||
-----------------------------
|
||||
|
||||
Required properties:
|
||||
- compatible: should be one of the following:
|
||||
"socionext,uniphier-ld11-adamv-reset" - for LD11 SoC
|
||||
"socionext,uniphier-ld20-adamv-reset" - for LD20 SoC
|
||||
- #reset-cells: should be 1.
|
||||
|
||||
Example:
|
||||
|
||||
adamv@57920000 {
|
||||
compatible = "socionext,uniphier-ld11-adamv",
|
||||
"simple-mfd", "syscon";
|
||||
reg = <0x57920000 0x1000>;
|
||||
|
||||
adamv_rst: reset {
|
||||
compatible = "socionext,uniphier-ld11-adamv-reset";
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
other nodes ...
|
||||
};
|
||||
UniPhier glue reset controller
|
||||
|
||||
|
||||
Peripheral core reset in glue layer
|
||||
|
|
|
|||
|
|
@ -1,20 +0,0 @@
|
|||
* i.MX25 Real Time Clock controller
|
||||
|
||||
Required properties:
|
||||
- compatible: should be: "fsl,imx25-rtc"
|
||||
- reg: physical base address of the controller and length of memory mapped
|
||||
region.
|
||||
- clocks: should contain the phandle for the rtc clock
|
||||
- interrupts: rtc alarm interrupt
|
||||
|
||||
Optional properties:
|
||||
- interrupts: dryice security violation interrupt (second entry)
|
||||
|
||||
Example:
|
||||
|
||||
rtc@53ffc000 {
|
||||
compatible = "fsl,imx25-rtc";
|
||||
reg = <0x53ffc000 0x4000>;
|
||||
clocks = <&clks 81>;
|
||||
interrupts = <25 56>;
|
||||
};
|
||||
|
|
@ -0,0 +1,44 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/rtc/imxdi-rtc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: i.MX25 Real Time Clock controller
|
||||
|
||||
maintainers:
|
||||
- Roland Stigge <stigge@antcom.de>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: fsl,imx25-rtc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
items:
|
||||
- description: rtc alarm interrupt
|
||||
- description: dryice security violation interrupt
|
||||
minItems: 1
|
||||
maxItems: 2
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- clocks
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
rtc@53ffc000 {
|
||||
compatible = "fsl,imx25-rtc";
|
||||
reg = <0x53ffc000 0x4000>;
|
||||
clocks = <&clks 81>;
|
||||
interrupts = <25>, <56>;
|
||||
};
|
||||
|
|
@ -1,17 +0,0 @@
|
|||
* Marvell Real Time Clock controller
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "mrvl,sa1100-rtc"
|
||||
- reg: physical base address of the controller and length of memory mapped
|
||||
region.
|
||||
- interrupts: Should be two. The first interrupt number is the rtc alarm
|
||||
interrupt and the second interrupt number is the rtc hz interrupt.
|
||||
- interrupt-names: Assign name of irq resource.
|
||||
|
||||
Example:
|
||||
rtc: rtc@d4010000 {
|
||||
compatible = "mrvl,mmp-rtc";
|
||||
reg = <0xd4010000 0x1000>;
|
||||
interrupts = <5>, <6>;
|
||||
interrupt-names = "rtc 1Hz", "rtc alarm";
|
||||
};
|
||||
|
|
@ -0,0 +1,57 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/rtc/sa1100-rtc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Marvell Real Time Clock controller bindings
|
||||
|
||||
allOf:
|
||||
- $ref: rtc.yaml#
|
||||
|
||||
maintainers:
|
||||
- Alessandro Zummo <a.zummo@towertech.it>
|
||||
- Alexandre Belloni <alexandre.belloni@bootlin.com>
|
||||
- Rob Herring <robh+dt@kernel.org>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- mrvl,sa1100-rtc
|
||||
- mrvl,mmp-rtc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
resets:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
minItems: 2
|
||||
|
||||
interrupt-names:
|
||||
items:
|
||||
- const: 'rtc 1Hz'
|
||||
- const: 'rtc alarm'
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- interrupt-names
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
rtc: rtc@d4010000 {
|
||||
compatible = "mrvl,mmp-rtc";
|
||||
reg = <0xd4010000 0x1000>;
|
||||
interrupts = <5>, <6>;
|
||||
interrupt-names = "rtc 1Hz", "rtc alarm";
|
||||
};
|
||||
|
||||
...
|
||||
|
|
@ -5,7 +5,8 @@ SPI0, and the other known as the "Universal SPI Master"; part of the
|
|||
auxiliary block. This binding applies to the SPI0 controller.
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "brcm,bcm2835-spi".
|
||||
- compatible: Should be one of "brcm,bcm2835-spi" for BCM2835/2836/2837 or
|
||||
"brcm,bcm2711-spi" for BCM2711 or "brcm,bcm7211-spi" for BCM7211.
|
||||
- reg: Should contain register location and length.
|
||||
- interrupts: Should contain interrupt.
|
||||
- clocks: The clock feeding the SPI controller.
|
||||
|
|
|
|||
|
|
@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: QCOM SoC Temperature Sensor (TSENS)
|
||||
|
||||
maintainers:
|
||||
- Amit Kucheria <amit.kucheria@linaro.org>
|
||||
- Amit Kucheria <amitk@kernel.org>
|
||||
|
||||
description: |
|
||||
QCOM SoCs have TSENS IP to allow temperature measurement. There are currently
|
||||
|
|
|
|||
|
|
@ -1,71 +0,0 @@
|
|||
* Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
|
||||
|
||||
Required properties:
|
||||
- compatible : Must include "fsl,qoriq-tmu" or "fsl,imx8mq-tmu". The
|
||||
version of the device is determined by the TMU IP Block Revision
|
||||
Register (IPBRR0) at offset 0x0BF8.
|
||||
Table of correspondences between IPBRR0 values and example chips:
|
||||
Value Device
|
||||
---------- -----
|
||||
0x01900102 T1040
|
||||
- reg : Address range of TMU registers.
|
||||
- interrupts : Contains the interrupt for TMU.
|
||||
- fsl,tmu-range : The values to be programmed into TTRnCR, as specified by
|
||||
the SoC reference manual. The first cell is TTR0CR, the second is
|
||||
TTR1CR, etc.
|
||||
- fsl,tmu-calibration : A list of cell pairs containing temperature
|
||||
calibration data, as specified by the SoC reference manual.
|
||||
The first cell of each pair is the value to be written to TTCFGR,
|
||||
and the second is the value to be written to TSCFGR.
|
||||
- #thermal-sensor-cells : Must be 1. The sensor specifier is the monitoring
|
||||
site ID, and represents the "n" in TRITSRn and TRATSRn.
|
||||
|
||||
Optional property:
|
||||
- little-endian : If present, the TMU registers are little endian. If absent,
|
||||
the default is big endian.
|
||||
- clocks : the clock for clocking the TMU silicon.
|
||||
|
||||
Example:
|
||||
|
||||
tmu@f0000 {
|
||||
compatible = "fsl,qoriq-tmu";
|
||||
reg = <0xf0000 0x1000>;
|
||||
interrupts = <18 2 0 0>;
|
||||
fsl,tmu-range = <0x000a0000 0x00090026 0x0008004a 0x0001006a>;
|
||||
fsl,tmu-calibration = <0x00000000 0x00000025
|
||||
0x00000001 0x00000028
|
||||
0x00000002 0x0000002d
|
||||
0x00000003 0x00000031
|
||||
0x00000004 0x00000036
|
||||
0x00000005 0x0000003a
|
||||
0x00000006 0x00000040
|
||||
0x00000007 0x00000044
|
||||
0x00000008 0x0000004a
|
||||
0x00000009 0x0000004f
|
||||
0x0000000a 0x00000054
|
||||
|
||||
0x00010000 0x0000000d
|
||||
0x00010001 0x00000013
|
||||
0x00010002 0x00000019
|
||||
0x00010003 0x0000001f
|
||||
0x00010004 0x00000025
|
||||
0x00010005 0x0000002d
|
||||
0x00010006 0x00000033
|
||||
0x00010007 0x00000043
|
||||
0x00010008 0x0000004b
|
||||
0x00010009 0x00000053
|
||||
|
||||
0x00020000 0x00000010
|
||||
0x00020001 0x00000017
|
||||
0x00020002 0x0000001f
|
||||
0x00020003 0x00000029
|
||||
0x00020004 0x00000031
|
||||
0x00020005 0x0000003c
|
||||
0x00020006 0x00000042
|
||||
0x00020007 0x0000004d
|
||||
0x00020008 0x00000056
|
||||
|
||||
0x00030000 0x00000012
|
||||
0x00030001 0x0000001d>;
|
||||
#thermal-sensor-cells = <1>;
|
||||
};
|
||||
|
|
@ -0,0 +1,114 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/thermal/qoriq-thermal.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
|
||||
|
||||
maintainers:
|
||||
- Anson Huang <Anson.Huang@nxp.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
description: |
|
||||
The version of the device is determined by the TMU IP Block Revision
|
||||
Register (IPBRR0) at offset 0x0BF8.
|
||||
Table of correspondences between IPBRR0 values and example chips:
|
||||
Value Device
|
||||
---------- -----
|
||||
0x01900102 T1040
|
||||
enum:
|
||||
- fsl,qoriq-tmu
|
||||
- fsl,imx8mq-tmu
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
fsl,tmu-range:
|
||||
$ref: '/schemas/types.yaml#/definitions/uint32-array'
|
||||
description: |
|
||||
The values to be programmed into TTRnCR, as specified by the SoC
|
||||
reference manual. The first cell is TTR0CR, the second is TTR1CR, etc.
|
||||
maxItems: 4
|
||||
|
||||
fsl,tmu-calibration:
|
||||
$ref: '/schemas/types.yaml#/definitions/uint32-matrix'
|
||||
description: |
|
||||
A list of cell pairs containing temperature calibration data, as
|
||||
specified by the SoC reference manual. The first cell of each pair
|
||||
is the value to be written to TTCFGR, and the second is the value
|
||||
to be written to TSCFGR.
|
||||
items:
|
||||
items:
|
||||
- description: value for TTCFGR
|
||||
- description: value for TSCFGR
|
||||
minItems: 1
|
||||
maxItems: 64
|
||||
|
||||
little-endian:
|
||||
description: |
|
||||
boolean, if present, the TMU registers are little endian. If absent,
|
||||
the default is big endian.
|
||||
type: boolean
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
"#thermal-sensor-cells":
|
||||
const: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- fsl,tmu-range
|
||||
- fsl,tmu-calibration
|
||||
- '#thermal-sensor-cells'
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
tmu@f0000 {
|
||||
compatible = "fsl,qoriq-tmu";
|
||||
reg = <0xf0000 0x1000>;
|
||||
interrupts = <18 2 0 0>;
|
||||
fsl,tmu-range = <0x000a0000 0x00090026 0x0008004a 0x0001006a>;
|
||||
fsl,tmu-calibration = <0x00000000 0x00000025>,
|
||||
<0x00000001 0x00000028>,
|
||||
<0x00000002 0x0000002d>,
|
||||
<0x00000003 0x00000031>,
|
||||
<0x00000004 0x00000036>,
|
||||
<0x00000005 0x0000003a>,
|
||||
<0x00000006 0x00000040>,
|
||||
<0x00000007 0x00000044>,
|
||||
<0x00000008 0x0000004a>,
|
||||
<0x00000009 0x0000004f>,
|
||||
<0x0000000a 0x00000054>,
|
||||
<0x00010000 0x0000000d>,
|
||||
<0x00010001 0x00000013>,
|
||||
<0x00010002 0x00000019>,
|
||||
<0x00010003 0x0000001f>,
|
||||
<0x00010004 0x00000025>,
|
||||
<0x00010005 0x0000002d>,
|
||||
<0x00010006 0x00000033>,
|
||||
<0x00010007 0x00000043>,
|
||||
<0x00010008 0x0000004b>,
|
||||
<0x00010009 0x00000053>,
|
||||
<0x00020000 0x00000010>,
|
||||
<0x00020001 0x00000017>,
|
||||
<0x00020002 0x0000001f>,
|
||||
<0x00020003 0x00000029>,
|
||||
<0x00020004 0x00000031>,
|
||||
<0x00020005 0x0000003c>,
|
||||
<0x00020006 0x00000042>,
|
||||
<0x00020007 0x0000004d>,
|
||||
<0x00020008 0x00000056>,
|
||||
<0x00030000 0x00000012>,
|
||||
<0x00030001 0x0000001d>;
|
||||
#thermal-sensor-cells = <1>;
|
||||
};
|
||||
|
|
@ -1,17 +0,0 @@
|
|||
* Marvell MMP Timer controller
|
||||
|
||||
Required properties:
|
||||
- compatible : Should be "mrvl,mmp-timer".
|
||||
- reg : Address and length of the register set of timer controller.
|
||||
- interrupts : Should be the interrupt number.
|
||||
|
||||
Optional properties:
|
||||
- clocks : Should contain a single entry describing the clock input.
|
||||
|
||||
Example:
|
||||
timer0: timer@d4014000 {
|
||||
compatible = "mrvl,mmp-timer";
|
||||
reg = <0xd4014000 0x100>;
|
||||
interrupts = <13>;
|
||||
clocks = <&coreclk 2>;
|
||||
};
|
||||
|
|
@ -0,0 +1,46 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/timer/mrvl,mmp-timer.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Marvell MMP Timer bindings
|
||||
|
||||
maintainers:
|
||||
- Daniel Lezcano <daniel.lezcano@linaro.org>
|
||||
- Thomas Gleixner <tglx@linutronix.de>
|
||||
- Rob Herring <robh+dt@kernel.org>
|
||||
|
||||
properties:
|
||||
$nodename:
|
||||
pattern: '^timer@[a-f0-9]+$'
|
||||
|
||||
compatible:
|
||||
const: mrvl,mmp-timer
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
timer@d4014000 {
|
||||
compatible = "mrvl,mmp-timer";
|
||||
reg = <0xd4014000 0x100>;
|
||||
interrupts = <13>;
|
||||
clocks = <&coreclk 2>;
|
||||
};
|
||||
|
||||
...
|
||||
|
|
@ -0,0 +1,86 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/usb/renesas,usb-xhci.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Renesas USB xHCI controllers
|
||||
|
||||
maintainers:
|
||||
- Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
|
||||
- Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
|
||||
|
||||
allOf:
|
||||
- $ref: "usb-hcd.yaml"
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- items:
|
||||
- enum:
|
||||
- renesas,xhci-r8a7742 # RZ/G1H
|
||||
- renesas,xhci-r8a7743 # RZ/G1M
|
||||
- renesas,xhci-r8a7744 # RZ/G1N
|
||||
- renesas,xhci-r8a7790 # R-Car H2
|
||||
- renesas,xhci-r8a7791 # R-Car M2-W
|
||||
- renesas,xhci-r8a7793 # R-Car M2-N
|
||||
- const: renesas,rcar-gen2-xhci # R-Car Gen2 and RZ/G1
|
||||
- items:
|
||||
- enum:
|
||||
- renesas,xhci-r8a774a1 # RZ/G2M
|
||||
- renesas,xhci-r8a774b1 # RZ/G2N
|
||||
- renesas,xhci-r8a774c0 # RZ/G2E
|
||||
- renesas,xhci-r8a7795 # R-Car H3
|
||||
- renesas,xhci-r8a7796 # R-Car M3-W
|
||||
- renesas,xhci-r8a77961 # R-Car M3-W+
|
||||
- renesas,xhci-r8a77965 # R-Car M3-N
|
||||
- renesas,xhci-r8a77990 # R-Car E3
|
||||
- const: renesas,rcar-gen3-xhci # R-Car Gen3 and RZ/G2
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
phys:
|
||||
maxItems: 1
|
||||
|
||||
phy-names:
|
||||
maxItems: 1
|
||||
items:
|
||||
- const: usb
|
||||
|
||||
power-domains:
|
||||
maxItems: 1
|
||||
|
||||
resets:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- clocks
|
||||
- power-domains
|
||||
- resets
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/r8a7795-cpg-mssr.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/power/r8a7795-sysc.h>
|
||||
|
||||
xhci0: usb@ee000000 {
|
||||
compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
|
||||
reg = <0xee000000 0xc00>;
|
||||
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 328>;
|
||||
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 328>;
|
||||
};
|
||||
|
|
@ -7,24 +7,6 @@ Required properties:
|
|||
- "marvell,armada3700-xhci" for Armada 37xx SoCs
|
||||
- "marvell,armada-375-xhci" for Armada 375 SoCs
|
||||
- "marvell,armada-380-xhci" for Armada 38x SoCs
|
||||
- "renesas,xhci-r8a7742" for r8a7742 SoC
|
||||
- "renesas,xhci-r8a7743" for r8a7743 SoC
|
||||
- "renesas,xhci-r8a7744" for r8a7744 SoC
|
||||
- "renesas,xhci-r8a774a1" for r8a774a1 SoC
|
||||
- "renesas,xhci-r8a774b1" for r8a774b1 SoC
|
||||
- "renesas,xhci-r8a774c0" for r8a774c0 SoC
|
||||
- "renesas,xhci-r8a7790" for r8a7790 SoC
|
||||
- "renesas,xhci-r8a7791" for r8a7791 SoC
|
||||
- "renesas,xhci-r8a7793" for r8a7793 SoC
|
||||
- "renesas,xhci-r8a7795" for r8a7795 SoC
|
||||
- "renesas,xhci-r8a7796" for r8a77960 SoC
|
||||
- "renesas,xhci-r8a77961" for r8a77961 SoC
|
||||
- "renesas,xhci-r8a77965" for r8a77965 SoC
|
||||
- "renesas,xhci-r8a77990" for r8a77990 SoC
|
||||
- "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible
|
||||
device
|
||||
- "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 or RZ/G2 compatible
|
||||
device
|
||||
- "brcm,bcm7445-xhci" for Broadcom STB SoCs with XHCI
|
||||
- "xhci-platform" (deprecated)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
* virtio memory mapped device
|
||||
|
||||
See http://ozlabs.org/~rusty/virtio-spec/ for more details.
|
||||
See https://ozlabs.org/~rusty/virtio-spec/ for more details.
|
||||
|
||||
Required properties:
|
||||
|
||||
|
|
|
|||
|
|
@ -1082,6 +1082,7 @@ L: linux-media@vger.kernel.org
|
|||
S: Supported
|
||||
W: http://ez.analog.com/community/linux-device-drivers
|
||||
F: drivers/media/i2c/adv7180.c
|
||||
F: Documentation/devicetree/bindings/media/i2c/adv7180.yaml
|
||||
|
||||
ANALOG DEVICES INC ADV748X DRIVER
|
||||
M: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
||||
|
|
@ -14309,7 +14310,7 @@ F: drivers/net/ethernet/qualcomm/rmnet/
|
|||
F: include/linux/if_rmnet.h
|
||||
|
||||
QUALCOMM TSENS THERMAL DRIVER
|
||||
M: Amit Kucheria <amit.kucheria@linaro.org>
|
||||
M: Amit Kucheria <amitk@kernel.org>
|
||||
L: linux-pm@vger.kernel.org
|
||||
L: linux-arm-msm@vger.kernel.org
|
||||
S: Maintained
|
||||
|
|
@ -17011,7 +17012,7 @@ F: drivers/media/radio/radio-raremono.c
|
|||
THERMAL
|
||||
M: Zhang Rui <rui.zhang@intel.com>
|
||||
M: Daniel Lezcano <daniel.lezcano@linaro.org>
|
||||
R: Amit Kucheria <amit.kucheria@verdurent.com>
|
||||
R: Amit Kucheria <amitk@kernel.org>
|
||||
L: linux-pm@vger.kernel.org
|
||||
S: Supported
|
||||
Q: https://patchwork.kernel.org/project/linux-pm/list/
|
||||
|
|
|
|||
|
|
@ -122,7 +122,7 @@ int device_links_read_lock_held(void)
|
|||
* Check if @target depends on @dev or any device dependent on it (its child or
|
||||
* its consumer etc). Return 1 if that is the case or 0 otherwise.
|
||||
*/
|
||||
static int device_is_dependent(struct device *dev, void *target)
|
||||
int device_is_dependent(struct device *dev, void *target)
|
||||
{
|
||||
struct device_link *link;
|
||||
int ret;
|
||||
|
|
|
|||
|
|
@ -864,7 +864,7 @@ EXPORT_SYMBOL_GPL(of_address_to_resource);
|
|||
|
||||
/**
|
||||
* of_iomap - Maps the memory mapped IO for a given device_node
|
||||
* @device: the device whose io range will be mapped
|
||||
* @np: the device whose io range will be mapped
|
||||
* @index: index of the io range
|
||||
*
|
||||
* Returns a pointer to the mapped memory
|
||||
|
|
|
|||
|
|
@ -54,7 +54,7 @@ void __init fdt_reserved_mem_save_node(unsigned long node, const char *uname,
|
|||
struct reserved_mem *rmem = &reserved_mem[reserved_mem_count];
|
||||
|
||||
if (reserved_mem_count == ARRAY_SIZE(reserved_mem)) {
|
||||
pr_err("not enough space all defined regions.\n");
|
||||
pr_err("not enough space for all defined regions.\n");
|
||||
return;
|
||||
}
|
||||
|
||||
|
|
@ -69,7 +69,7 @@ void __init fdt_reserved_mem_save_node(unsigned long node, const char *uname,
|
|||
|
||||
/**
|
||||
* __reserved_mem_alloc_size() - allocate reserved memory described by
|
||||
* 'size', 'align' and 'alloc-ranges' properties.
|
||||
* 'size', 'alignment' and 'alloc-ranges' properties.
|
||||
*/
|
||||
static int __init __reserved_mem_alloc_size(unsigned long node,
|
||||
const char *uname, phys_addr_t *res_base, phys_addr_t *res_size)
|
||||
|
|
@ -79,7 +79,7 @@ static int __init __reserved_mem_alloc_size(unsigned long node,
|
|||
phys_addr_t base = 0, align = 0, size;
|
||||
int len;
|
||||
const __be32 *prop;
|
||||
int nomap;
|
||||
bool nomap;
|
||||
int ret;
|
||||
|
||||
prop = of_get_flat_dt_prop(node, "size", &len);
|
||||
|
|
@ -92,8 +92,6 @@ static int __init __reserved_mem_alloc_size(unsigned long node,
|
|||
}
|
||||
size = dt_mem_next_cell(dt_root_size_cells, &prop);
|
||||
|
||||
nomap = of_get_flat_dt_prop(node, "no-map", NULL) != NULL;
|
||||
|
||||
prop = of_get_flat_dt_prop(node, "alignment", &len);
|
||||
if (prop) {
|
||||
if (len != dt_root_addr_cells * sizeof(__be32)) {
|
||||
|
|
@ -104,11 +102,13 @@ static int __init __reserved_mem_alloc_size(unsigned long node,
|
|||
align = dt_mem_next_cell(dt_root_addr_cells, &prop);
|
||||
}
|
||||
|
||||
nomap = of_get_flat_dt_prop(node, "no-map", NULL) != NULL;
|
||||
|
||||
/* Need adjust the alignment to satisfy the CMA requirement */
|
||||
if (IS_ENABLED(CONFIG_CMA)
|
||||
&& of_flat_dt_is_compatible(node, "shared-dma-pool")
|
||||
&& of_get_flat_dt_prop(node, "reusable", NULL)
|
||||
&& !of_get_flat_dt_prop(node, "no-map", NULL)) {
|
||||
&& !nomap) {
|
||||
unsigned long order =
|
||||
max_t(unsigned long, MAX_ORDER - 1, pageblock_order);
|
||||
|
||||
|
|
@ -247,7 +247,7 @@ void __init fdt_init_reserved_mem(void)
|
|||
int len;
|
||||
const __be32 *prop;
|
||||
int err = 0;
|
||||
int nomap;
|
||||
bool nomap;
|
||||
|
||||
nomap = of_get_flat_dt_prop(node, "no-map", NULL) != NULL;
|
||||
prop = of_get_flat_dt_prop(node, "phandle", &len);
|
||||
|
|
|
|||
|
|
@ -1014,6 +1014,30 @@ static bool of_is_ancestor_of(struct device_node *test_ancestor,
|
|||
return false;
|
||||
}
|
||||
|
||||
/**
|
||||
* of_get_next_parent_dev - Add device link to supplier from supplier phandle
|
||||
* @np: device tree node
|
||||
*
|
||||
* Given a device tree node (@np), this function finds its closest ancestor
|
||||
* device tree node that has a corresponding struct device.
|
||||
*
|
||||
* The caller of this function is expected to call put_device() on the returned
|
||||
* device when they are done.
|
||||
*/
|
||||
static struct device *of_get_next_parent_dev(struct device_node *np)
|
||||
{
|
||||
struct device *dev = NULL;
|
||||
|
||||
of_node_get(np);
|
||||
do {
|
||||
np = of_get_next_parent(np);
|
||||
if (np)
|
||||
dev = get_dev_from_fwnode(&np->fwnode);
|
||||
} while (np && !dev);
|
||||
of_node_put(np);
|
||||
return dev;
|
||||
}
|
||||
|
||||
/**
|
||||
* of_link_to_phandle - Add device link to supplier from supplier phandle
|
||||
* @dev: consumer device
|
||||
|
|
@ -1035,10 +1059,9 @@ static bool of_is_ancestor_of(struct device_node *test_ancestor,
|
|||
static int of_link_to_phandle(struct device *dev, struct device_node *sup_np,
|
||||
u32 dl_flags)
|
||||
{
|
||||
struct device *sup_dev;
|
||||
struct device *sup_dev, *sup_par_dev;
|
||||
int ret = 0;
|
||||
struct device_node *tmp_np = sup_np;
|
||||
int is_populated;
|
||||
|
||||
of_node_get(sup_np);
|
||||
/*
|
||||
|
|
@ -1075,16 +1098,43 @@ static int of_link_to_phandle(struct device *dev, struct device_node *sup_np,
|
|||
return -EINVAL;
|
||||
}
|
||||
sup_dev = get_dev_from_fwnode(&sup_np->fwnode);
|
||||
is_populated = of_node_check_flag(sup_np, OF_POPULATED);
|
||||
of_node_put(sup_np);
|
||||
if (!sup_dev && is_populated) {
|
||||
if (!sup_dev && of_node_check_flag(sup_np, OF_POPULATED)) {
|
||||
/* Early device without struct device. */
|
||||
dev_dbg(dev, "Not linking to %pOFP - No struct device\n",
|
||||
sup_np);
|
||||
of_node_put(sup_np);
|
||||
return -ENODEV;
|
||||
} else if (!sup_dev) {
|
||||
/*
|
||||
* DL_FLAG_SYNC_STATE_ONLY doesn't block probing and supports
|
||||
* cycles. So cycle detection isn't necessary and shouldn't be
|
||||
* done.
|
||||
*/
|
||||
if (dl_flags & DL_FLAG_SYNC_STATE_ONLY) {
|
||||
of_node_put(sup_np);
|
||||
return -EAGAIN;
|
||||
}
|
||||
|
||||
sup_par_dev = of_get_next_parent_dev(sup_np);
|
||||
|
||||
if (sup_par_dev && device_is_dependent(dev, sup_par_dev)) {
|
||||
/* Cyclic dependency detected, don't try to link */
|
||||
dev_dbg(dev, "Not linking to %pOFP - cycle detected\n",
|
||||
sup_np);
|
||||
ret = -EINVAL;
|
||||
} else {
|
||||
/*
|
||||
* Can't check for cycles or no cycles. So let's try
|
||||
* again later.
|
||||
*/
|
||||
ret = -EAGAIN;
|
||||
}
|
||||
|
||||
of_node_put(sup_np);
|
||||
put_device(sup_par_dev);
|
||||
return ret;
|
||||
}
|
||||
of_node_put(sup_np);
|
||||
if (!device_link_add(dev, sup_dev, dl_flags))
|
||||
ret = -EINVAL;
|
||||
put_device(sup_dev);
|
||||
|
|
@ -1219,6 +1269,20 @@ DEFINE_SIMPLE_PROP(dmas, "dmas", "#dma-cells")
|
|||
DEFINE_SIMPLE_PROP(power_domains, "power-domains", "#power-domain-cells")
|
||||
DEFINE_SIMPLE_PROP(hwlocks, "hwlocks", "#hwlock-cells")
|
||||
DEFINE_SIMPLE_PROP(extcon, "extcon", NULL)
|
||||
DEFINE_SIMPLE_PROP(interrupts_extended, "interrupts-extended",
|
||||
"#interrupt-cells")
|
||||
DEFINE_SIMPLE_PROP(nvmem_cells, "nvmem-cells", NULL)
|
||||
DEFINE_SIMPLE_PROP(phys, "phys", "#phy-cells")
|
||||
DEFINE_SIMPLE_PROP(wakeup_parent, "wakeup-parent", NULL)
|
||||
DEFINE_SIMPLE_PROP(pinctrl0, "pinctrl-0", NULL)
|
||||
DEFINE_SIMPLE_PROP(pinctrl1, "pinctrl-1", NULL)
|
||||
DEFINE_SIMPLE_PROP(pinctrl2, "pinctrl-2", NULL)
|
||||
DEFINE_SIMPLE_PROP(pinctrl3, "pinctrl-3", NULL)
|
||||
DEFINE_SIMPLE_PROP(pinctrl4, "pinctrl-4", NULL)
|
||||
DEFINE_SIMPLE_PROP(pinctrl5, "pinctrl-5", NULL)
|
||||
DEFINE_SIMPLE_PROP(pinctrl6, "pinctrl-6", NULL)
|
||||
DEFINE_SIMPLE_PROP(pinctrl7, "pinctrl-7", NULL)
|
||||
DEFINE_SIMPLE_PROP(pinctrl8, "pinctrl-8", NULL)
|
||||
DEFINE_SUFFIX_PROP(regulators, "-supply", NULL)
|
||||
DEFINE_SUFFIX_PROP(gpio, "-gpio", "#gpio-cells")
|
||||
DEFINE_SUFFIX_PROP(gpios, "-gpios", "#gpio-cells")
|
||||
|
|
@ -1244,6 +1308,19 @@ static const struct supplier_bindings of_supplier_bindings[] = {
|
|||
{ .parse_prop = parse_power_domains, },
|
||||
{ .parse_prop = parse_hwlocks, },
|
||||
{ .parse_prop = parse_extcon, },
|
||||
{ .parse_prop = parse_interrupts_extended, },
|
||||
{ .parse_prop = parse_nvmem_cells, },
|
||||
{ .parse_prop = parse_phys, },
|
||||
{ .parse_prop = parse_wakeup_parent, },
|
||||
{ .parse_prop = parse_pinctrl0, },
|
||||
{ .parse_prop = parse_pinctrl1, },
|
||||
{ .parse_prop = parse_pinctrl2, },
|
||||
{ .parse_prop = parse_pinctrl3, },
|
||||
{ .parse_prop = parse_pinctrl4, },
|
||||
{ .parse_prop = parse_pinctrl5, },
|
||||
{ .parse_prop = parse_pinctrl6, },
|
||||
{ .parse_prop = parse_pinctrl7, },
|
||||
{ .parse_prop = parse_pinctrl8, },
|
||||
{ .parse_prop = parse_regulators, },
|
||||
{ .parse_prop = parse_gpio, },
|
||||
{ .parse_prop = parse_gpios, },
|
||||
|
|
|
|||
|
|
@ -23,13 +23,13 @@ device@70000000 {
|
|||
};
|
||||
|
||||
bus@80000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0x80000000 0x100000>;
|
||||
dma-ranges = <0x10000000 0x0 0x40000000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x80000000 0x0 0x100000>;
|
||||
dma-ranges = <0x1 0x0 0x0 0x20 0x0>;
|
||||
|
||||
device@1000 {
|
||||
reg = <0x1000 0x1000>;
|
||||
reg = <0x0 0x1000 0x0 0x1000>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -900,7 +900,7 @@ static void __init of_unittest_parse_dma_ranges(void)
|
|||
of_unittest_dma_ranges_one("/testcase-data/address-tests/device@70000000",
|
||||
0x0, 0x20000000, 0x40000000);
|
||||
of_unittest_dma_ranges_one("/testcase-data/address-tests/bus@80000000/device@1000",
|
||||
0x10000000, 0x20000000, 0x40000000);
|
||||
0x100000000, 0x20000000, 0x2000000000);
|
||||
of_unittest_dma_ranges_one("/testcase-data/address-tests/pci@90000000",
|
||||
0x80000000, 0x20000000, 0x10000000);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
* This header provides constants for most Multiplexer bindings.
|
||||
*
|
||||
* Most Multiplexer bindings specify an idle state. In most cases, the
|
||||
* the multiplexer can be left as is when idle, and in some cases it can
|
||||
* multiplexer can be left as is when idle, and in some cases it can
|
||||
* disconnect the input/output and leave the multiplexer in a high
|
||||
* impedance state.
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -844,6 +844,7 @@ int device_move(struct device *dev, struct device *new_parent,
|
|||
int device_change_owner(struct device *dev, kuid_t kuid, kgid_t kgid);
|
||||
const char *device_get_devnode(struct device *dev, umode_t *mode, kuid_t *uid,
|
||||
kgid_t *gid, const char **tmp);
|
||||
int device_is_dependent(struct device *dev, void *target);
|
||||
|
||||
static inline bool device_supports_offline(struct device *dev)
|
||||
{
|
||||
|
|
|
|||
Loading…
Reference in New Issue