diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.txt b/Documentation/devicetree/bindings/spi/spi-cadence.txt
new file mode 100644
index 000000000000..94f09141a4f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-cadence.txt
@@ -0,0 +1,31 @@
+Cadence SPI controller Device Tree Bindings
+-------------------------------------------
+
+Required properties:
+- compatible		: Should be "cdns,spi-r1p6" or "xlnx,zynq-spi-r1p6".
+- reg			: Physical base address and size of SPI registers map.
+- interrupts		: Property with a value describing the interrupt
+			  number.
+- interrupt-parent	: Must be core interrupt controller
+- clock-names		: List of input clock names - "ref_clk", "pclk"
+			  (See clock bindings for details).
+- clocks		: Clock phandles (see clock bindings for details).
+
+Optional properties:
+- num-cs		: Number of chip selects used.
+			  If a decoder is used, this will be the number of
+			  chip selects after the decoder.
+- is-decoded-cs		: Flag to indicate whether decoder is used or not.
+
+Example:
+
+	spi@e0007000 {
+		compatible = "xlnx,zynq-spi-r1p6";
+		clock-names = "ref_clk", "pclk";
+		clocks = <&clkc 26>, <&clkc 35>;
+		interrupt-parent = <&intc>;
+		interrupts = <0 49 4>;
+		num-cs = <4>;
+		is-decoded-cs = <0>;
+		reg = <0xe0007000 0x1000>;
+	} ;
diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c
index 943f7e95ec15..1ba4600de69f 100644
--- a/arch/blackfin/mach-bf609/boards/ezkit.c
+++ b/arch/blackfin/mach-bf609/boards/ezkit.c
@@ -20,7 +20,7 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/platform_data/pinctrl-adi2.h>
-#include <asm/bfin_spi3.h>
+#include <linux/spi/adi_spi3.h>
 #include <asm/dma.h>
 #include <asm/gpio.h>
 #include <asm/nand.h>
@@ -767,13 +767,13 @@ static struct flash_platform_data bfin_spi_flash_data = {
 	.type = "w25q32",
 };
 
-static struct bfin_spi3_chip spi_flash_chip_info = {
+static struct adi_spi3_chip spi_flash_chip_info = {
 	.enable_dma = true,         /* use dma transfer with this chip*/
 };
 #endif
 
 #if IS_ENABLED(CONFIG_SPI_SPIDEV)
-static struct bfin_spi3_chip spidev_chip_info = {
+static struct adi_spi3_chip spidev_chip_info = {
 	.enable_dma = true,
 };
 #endif
@@ -1736,7 +1736,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 };
-#if IS_ENABLED(CONFIG_SPI_BFIN_V3)
+#if IS_ENABLED(CONFIG_SPI_ADI_V3)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	{
@@ -1777,13 +1777,13 @@ static struct resource bfin_spi1_resource[] = {
 };
 
 /* SPI controller data */
-static struct bfin_spi3_master bf60x_spi_master_info0 = {
+static struct adi_spi3_master bf60x_spi_master_info0 = {
 	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
 	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bf60x_spi_master0 = {
-	.name = "bfin-spi3",
+	.name = "adi-spi3",
 	.id = 0, /* Bus number */
 	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
 	.resource = bfin_spi0_resource,
@@ -1792,13 +1792,13 @@ static struct platform_device bf60x_spi_master0 = {
 	},
 };
 
-static struct bfin_spi3_master bf60x_spi_master_info1 = {
+static struct adi_spi3_master bf60x_spi_master_info1 = {
 	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
 	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
 };
 
 static struct platform_device bf60x_spi_master1 = {
-	.name = "bfin-spi3",
+	.name = "adi-spi3",
 	.id = 1, /* Bus number */
 	.num_resources = ARRAY_SIZE(bfin_spi1_resource),
 	.resource = bfin_spi1_resource,
@@ -1990,7 +1990,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_sdh_device,
 #endif
 
-#if IS_ENABLED(CONFIG_SPI_BFIN_V3)
+#if IS_ENABLED(CONFIG_SPI_ADI_V3)
 	&bf60x_spi_master0,
 	&bf60x_spi_master1,
 #endif
@@ -2051,8 +2051,8 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = {
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1",  "pinctrl-adi2.0", NULL, "uart1"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0",  "pinctrl-adi2.0", NULL, "rsi0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("stmmaceth.0",  "pinctrl-adi2.0", NULL, "eth0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.0",  "pinctrl-adi2.0", NULL, "spi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.1",  "pinctrl-adi2.0", NULL, "spi1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.0",  "pinctrl-adi2.0", NULL, "spi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.1",  "pinctrl-adi2.0", NULL, "spi1"),
 	PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0",  "pinctrl-adi2.0", NULL, "twi0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1",  "pinctrl-adi2.0", NULL, "twi1"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary",  "pinctrl-adi2.0", NULL, "rotary"),
diff --git a/arch/blackfin/mach-bf609/clock.c b/arch/blackfin/mach-bf609/clock.c
index 56200f37cfc8..244fa4ab4c56 100644
--- a/arch/blackfin/mach-bf609/clock.c
+++ b/arch/blackfin/mach-bf609/clock.c
@@ -363,6 +363,12 @@ static struct clk ethclk = {
 	.ops	    = &dummy_clk_ops,
 };
 
+static struct clk spiclk = {
+	.name       = "spi",
+	.parent     = &sclk1,
+	.ops        = &dummy_clk_ops,
+};
+
 static struct clk_lookup bf609_clks[] = {
 	CLK(sys_clkin, NULL, "SYS_CLKIN"),
 	CLK(pll_clk, NULL, "PLLCLK"),
@@ -375,6 +381,7 @@ static struct clk_lookup bf609_clks[] = {
 	CLK(dclk, NULL, "DCLK"),
 	CLK(oclk, NULL, "OCLK"),
 	CLK(ethclk, NULL, "stmmaceth"),
+	CLK(spiclk, NULL, "spi"),
 };
 
 int __init clk_init(void)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 722312fe19be..213b5cbb9dcc 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -91,8 +91,8 @@ config SPI_BFIN5XX
 	help
 	  This is the SPI controller master driver for Blackfin 5xx processor.
 
-config SPI_BFIN_V3
-	tristate "SPI controller v3 for Blackfin"
+config SPI_ADI_V3
+	tristate "SPI controller v3 for ADI"
 	depends on BF60x
 	help
 	  This is the SPI controller v3 master driver
@@ -148,6 +148,13 @@ config SPI_BUTTERFLY
 	  inexpensive battery powered microcontroller evaluation board.
 	  This same cable can be used to flash new firmware.
 
+config SPI_CADENCE
+	tristate "Cadence SPI controller"
+	depends on ARM
+	help
+	  This selects the Cadence SPI controller master driver
+	  used by Xilinx Zynq.
+
 config SPI_CLPS711X
 	tristate "CLPS711X host SPI controller"
 	depends on ARCH_CLPS711X || COMPILE_TEST
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index bd792669e563..929c9f5eac01 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -18,10 +18,11 @@ obj-$(CONFIG_SPI_BCM2835)		+= spi-bcm2835.o
 obj-$(CONFIG_SPI_BCM63XX)		+= spi-bcm63xx.o
 obj-$(CONFIG_SPI_BCM63XX_HSSPI)		+= spi-bcm63xx-hsspi.o
 obj-$(CONFIG_SPI_BFIN5XX)		+= spi-bfin5xx.o
-obj-$(CONFIG_SPI_BFIN_V3)               += spi-bfin-v3.o
+obj-$(CONFIG_SPI_ADI_V3)                += spi-adi-v3.o
 obj-$(CONFIG_SPI_BFIN_SPORT)		+= spi-bfin-sport.o
 obj-$(CONFIG_SPI_BITBANG)		+= spi-bitbang.o
 obj-$(CONFIG_SPI_BUTTERFLY)		+= spi-butterfly.o
+obj-$(CONFIG_SPI_CADENCE)		+= spi-cadence.o
 obj-$(CONFIG_SPI_CLPS711X)		+= spi-clps711x.o
 obj-$(CONFIG_SPI_COLDFIRE_QSPI)		+= spi-coldfire-qspi.o
 obj-$(CONFIG_SPI_DAVINCI)		+= spi-davinci.o
diff --git a/drivers/spi/spi-bfin-v3.c b/drivers/spi/spi-adi-v3.c
similarity index 60%
rename from drivers/spi/spi-bfin-v3.c
rename to drivers/spi/spi-adi-v3.c
index 4089d0e0d84e..dcb2287c7f8a 100644
--- a/drivers/spi/spi-bfin-v3.c
+++ b/drivers/spi/spi-adi-v3.c
@@ -1,7 +1,7 @@
 /*
  * Analog Devices SPI3 controller driver
  *
- * Copyright (c) 2013 Analog Devices Inc.
+ * Copyright (c) 2014 Analog Devices Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -13,6 +13,7 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
@@ -26,35 +27,34 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/adi_spi3.h>
 #include <linux/types.h>
 
-#include <asm/bfin_spi3.h>
-#include <asm/cacheflush.h>
 #include <asm/dma.h>
 #include <asm/portmux.h>
 
-enum bfin_spi_state {
+enum adi_spi_state {
 	START_STATE,
 	RUNNING_STATE,
 	DONE_STATE,
 	ERROR_STATE
 };
 
-struct bfin_spi_master;
+struct adi_spi_master;
 
-struct bfin_spi_transfer_ops {
-	void (*write) (struct bfin_spi_master *);
-	void (*read) (struct bfin_spi_master *);
-	void (*duplex) (struct bfin_spi_master *);
+struct adi_spi_transfer_ops {
+	void (*write) (struct adi_spi_master *);
+	void (*read) (struct adi_spi_master *);
+	void (*duplex) (struct adi_spi_master *);
 };
 
 /* runtime info for spi master */
-struct bfin_spi_master {
+struct adi_spi_master {
 	/* SPI framework hookup */
 	struct spi_master *master;
 
 	/* Regs base of SPI controller */
-	struct bfin_spi_regs __iomem *regs;
+	struct adi_spi_regs __iomem *regs;
 
 	/* Pin request list */
 	u16 *pin_req;
@@ -65,7 +65,7 @@ struct bfin_spi_master {
 	/* Current message transfer state info */
 	struct spi_message *cur_msg;
 	struct spi_transfer *cur_transfer;
-	struct bfin_spi_device *cur_chip;
+	struct adi_spi_device *cur_chip;
 	unsigned transfer_len;
 
 	/* transfer buffer */
@@ -90,12 +90,12 @@ struct bfin_spi_master {
 	u32 ssel;
 
 	unsigned long sclk;
-	enum bfin_spi_state state;
+	enum adi_spi_state state;
 
-	const struct bfin_spi_transfer_ops *ops;
+	const struct adi_spi_transfer_ops *ops;
 };
 
-struct bfin_spi_device {
+struct adi_spi_device {
 	u32 control;
 	u32 clock;
 	u32 ssel;
@@ -105,17 +105,25 @@ struct bfin_spi_device {
 	u32 cs_gpio;
 	u32 tx_dummy_val; /* tx value for rx only transfer */
 	bool enable_dma;
-	const struct bfin_spi_transfer_ops *ops;
+	const struct adi_spi_transfer_ops *ops;
 };
 
-static void bfin_spi_enable(struct bfin_spi_master *drv_data)
+static void adi_spi_enable(struct adi_spi_master *drv_data)
 {
-	bfin_write_or(&drv_data->regs->control, SPI_CTL_EN);
+	u32 ctl;
+
+	ctl = ioread32(&drv_data->regs->control);
+	ctl |= SPI_CTL_EN;
+	iowrite32(ctl, &drv_data->regs->control);
 }
 
-static void bfin_spi_disable(struct bfin_spi_master *drv_data)
+static void adi_spi_disable(struct adi_spi_master *drv_data)
 {
-	bfin_write_and(&drv_data->regs->control, ~SPI_CTL_EN);
+	u32 ctl;
+
+	ctl = ioread32(&drv_data->regs->control);
+	ctl &= ~SPI_CTL_EN;
+	iowrite32(ctl, &drv_data->regs->control);
 }
 
 /* Caculate the SPI_CLOCK register value based on input HZ */
@@ -128,35 +136,43 @@ static u32 hz_to_spi_clock(u32 sclk, u32 speed_hz)
 	return spi_clock;
 }
 
-static int bfin_spi_flush(struct bfin_spi_master *drv_data)
+static int adi_spi_flush(struct adi_spi_master *drv_data)
 {
 	unsigned long limit = loops_per_jiffy << 1;
 
 	/* wait for stop and clear stat */
-	while (!(bfin_read(&drv_data->regs->status) & SPI_STAT_SPIF) && --limit)
+	while (!(ioread32(&drv_data->regs->status) & SPI_STAT_SPIF) && --limit)
 		cpu_relax();
 
-	bfin_write(&drv_data->regs->status, 0xFFFFFFFF);
+	iowrite32(0xFFFFFFFF, &drv_data->regs->status);
 
 	return limit;
 }
 
 /* Chip select operation functions for cs_change flag */
-static void bfin_spi_cs_active(struct bfin_spi_master *drv_data, struct bfin_spi_device *chip)
+static void adi_spi_cs_active(struct adi_spi_master *drv_data, struct adi_spi_device *chip)
 {
-	if (likely(chip->cs < MAX_CTRL_CS))
-		bfin_write_and(&drv_data->regs->ssel, ~chip->ssel);
-	else
+	if (likely(chip->cs < MAX_CTRL_CS)) {
+		u32 reg;
+		reg = ioread32(&drv_data->regs->ssel);
+		reg &= ~chip->ssel;
+		iowrite32(reg, &drv_data->regs->ssel);
+	} else {
 		gpio_set_value(chip->cs_gpio, 0);
+	}
 }
 
-static void bfin_spi_cs_deactive(struct bfin_spi_master *drv_data,
-				struct bfin_spi_device *chip)
+static void adi_spi_cs_deactive(struct adi_spi_master *drv_data,
+				struct adi_spi_device *chip)
 {
-	if (likely(chip->cs < MAX_CTRL_CS))
-		bfin_write_or(&drv_data->regs->ssel, chip->ssel);
-	else
+	if (likely(chip->cs < MAX_CTRL_CS)) {
+		u32 reg;
+		reg = ioread32(&drv_data->regs->ssel);
+		reg |= chip->ssel;
+		iowrite32(reg, &drv_data->regs->ssel);
+	} else {
 		gpio_set_value(chip->cs_gpio, 1);
+	}
 
 	/* Move delay here for consistency */
 	if (chip->cs_chg_udelay)
@@ -164,187 +180,192 @@ static void bfin_spi_cs_deactive(struct bfin_spi_master *drv_data,
 }
 
 /* enable or disable the pin muxed by GPIO and SPI CS to work as SPI CS */
-static inline void bfin_spi_cs_enable(struct bfin_spi_master *drv_data,
-					struct bfin_spi_device *chip)
+static inline void adi_spi_cs_enable(struct adi_spi_master *drv_data,
+					struct adi_spi_device *chip)
 {
-	if (chip->cs < MAX_CTRL_CS)
-		bfin_write_or(&drv_data->regs->ssel, chip->ssel >> 8);
+	if (chip->cs < MAX_CTRL_CS) {
+		u32 reg;
+		reg = ioread32(&drv_data->regs->ssel);
+		reg |= chip->ssel >> 8;
+		iowrite32(reg, &drv_data->regs->ssel);
+	}
 }
 
-static inline void bfin_spi_cs_disable(struct bfin_spi_master *drv_data,
-					struct bfin_spi_device *chip)
+static inline void adi_spi_cs_disable(struct adi_spi_master *drv_data,
+					struct adi_spi_device *chip)
 {
-	if (chip->cs < MAX_CTRL_CS)
-		bfin_write_and(&drv_data->regs->ssel, ~(chip->ssel >> 8));
+	if (chip->cs < MAX_CTRL_CS) {
+		u32 reg;
+		reg = ioread32(&drv_data->regs->ssel);
+		reg &= ~(chip->ssel >> 8);
+		iowrite32(reg, &drv_data->regs->ssel);
+	}
 }
 
 /* stop controller and re-config current chip*/
-static void bfin_spi_restore_state(struct bfin_spi_master *drv_data)
+static void adi_spi_restore_state(struct adi_spi_master *drv_data)
 {
-	struct bfin_spi_device *chip = drv_data->cur_chip;
+	struct adi_spi_device *chip = drv_data->cur_chip;
 
 	/* Clear status and disable clock */
-	bfin_write(&drv_data->regs->status, 0xFFFFFFFF);
-	bfin_write(&drv_data->regs->rx_control, 0x0);
-	bfin_write(&drv_data->regs->tx_control, 0x0);
-	bfin_spi_disable(drv_data);
-
-	SSYNC();
+	iowrite32(0xFFFFFFFF, &drv_data->regs->status);
+	iowrite32(0x0, &drv_data->regs->rx_control);
+	iowrite32(0x0, &drv_data->regs->tx_control);
+	adi_spi_disable(drv_data);
 
 	/* Load the registers */
-	bfin_write(&drv_data->regs->control, chip->control);
-	bfin_write(&drv_data->regs->clock, chip->clock);
+	iowrite32(chip->control, &drv_data->regs->control);
+	iowrite32(chip->clock, &drv_data->regs->clock);
 
-	bfin_spi_enable(drv_data);
+	adi_spi_enable(drv_data);
 	drv_data->tx_num = drv_data->rx_num = 0;
 	/* we always choose tx transfer initiate */
-	bfin_write(&drv_data->regs->rx_control, SPI_RXCTL_REN);
-	bfin_write(&drv_data->regs->tx_control,
-			SPI_TXCTL_TEN | SPI_TXCTL_TTI);
-	bfin_spi_cs_active(drv_data, chip);
+	iowrite32(SPI_RXCTL_REN, &drv_data->regs->rx_control);
+	iowrite32(SPI_TXCTL_TEN | SPI_TXCTL_TTI, &drv_data->regs->tx_control);
+	adi_spi_cs_active(drv_data, chip);
 }
 
 /* discard invalid rx data and empty rfifo */
-static inline void dummy_read(struct bfin_spi_master *drv_data)
+static inline void dummy_read(struct adi_spi_master *drv_data)
 {
-	while (!(bfin_read(&drv_data->regs->status) & SPI_STAT_RFE))
-		bfin_read(&drv_data->regs->rfifo);
+	while (!(ioread32(&drv_data->regs->status) & SPI_STAT_RFE))
+		ioread32(&drv_data->regs->rfifo);
 }
 
-static void bfin_spi_u8_write(struct bfin_spi_master *drv_data)
+static void adi_spi_u8_write(struct adi_spi_master *drv_data)
 {
 	dummy_read(drv_data);
 	while (drv_data->tx < drv_data->tx_end) {
-		bfin_write(&drv_data->regs->tfifo, (*(u8 *)(drv_data->tx++)));
-		while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+		iowrite32(*(u8 *)(drv_data->tx++), &drv_data->regs->tfifo);
+		while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
 			cpu_relax();
-		bfin_read(&drv_data->regs->rfifo);
+		ioread32(&drv_data->regs->rfifo);
 	}
 }
 
-static void bfin_spi_u8_read(struct bfin_spi_master *drv_data)
+static void adi_spi_u8_read(struct adi_spi_master *drv_data)
 {
 	u32 tx_val = drv_data->cur_chip->tx_dummy_val;
 
 	dummy_read(drv_data);
 	while (drv_data->rx < drv_data->rx_end) {
-		bfin_write(&drv_data->regs->tfifo, tx_val);
-		while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+		iowrite32(tx_val, &drv_data->regs->tfifo);
+		while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
 			cpu_relax();
-		*(u8 *)(drv_data->rx++) = bfin_read(&drv_data->regs->rfifo);
+		*(u8 *)(drv_data->rx++) = ioread32(&drv_data->regs->rfifo);
 	}
 }
 
-static void bfin_spi_u8_duplex(struct bfin_spi_master *drv_data)
+static void adi_spi_u8_duplex(struct adi_spi_master *drv_data)
 {
 	dummy_read(drv_data);
 	while (drv_data->rx < drv_data->rx_end) {
-		bfin_write(&drv_data->regs->tfifo, (*(u8 *)(drv_data->tx++)));
-		while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+		iowrite32(*(u8 *)(drv_data->tx++), &drv_data->regs->tfifo);
+		while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
 			cpu_relax();
-		*(u8 *)(drv_data->rx++) = bfin_read(&drv_data->regs->rfifo);
+		*(u8 *)(drv_data->rx++) = ioread32(&drv_data->regs->rfifo);
 	}
 }
 
-static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u8 = {
-	.write  = bfin_spi_u8_write,
-	.read   = bfin_spi_u8_read,
-	.duplex = bfin_spi_u8_duplex,
+static const struct adi_spi_transfer_ops adi_spi_transfer_ops_u8 = {
+	.write  = adi_spi_u8_write,
+	.read   = adi_spi_u8_read,
+	.duplex = adi_spi_u8_duplex,
 };
 
-static void bfin_spi_u16_write(struct bfin_spi_master *drv_data)
+static void adi_spi_u16_write(struct adi_spi_master *drv_data)
 {
 	dummy_read(drv_data);
 	while (drv_data->tx < drv_data->tx_end) {
-		bfin_write(&drv_data->regs->tfifo, (*(u16 *)drv_data->tx));
+		iowrite32(*(u16 *)drv_data->tx, &drv_data->regs->tfifo);
 		drv_data->tx += 2;
-		while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+		while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
 			cpu_relax();
-		bfin_read(&drv_data->regs->rfifo);
+		ioread32(&drv_data->regs->rfifo);
 	}
 }
 
-static void bfin_spi_u16_read(struct bfin_spi_master *drv_data)
+static void adi_spi_u16_read(struct adi_spi_master *drv_data)
 {
 	u32 tx_val = drv_data->cur_chip->tx_dummy_val;
 
 	dummy_read(drv_data);
 	while (drv_data->rx < drv_data->rx_end) {
-		bfin_write(&drv_data->regs->tfifo, tx_val);
-		while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+		iowrite32(tx_val, &drv_data->regs->tfifo);
+		while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
 			cpu_relax();
-		*(u16 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo);
+		*(u16 *)drv_data->rx = ioread32(&drv_data->regs->rfifo);
 		drv_data->rx += 2;
 	}
 }
 
-static void bfin_spi_u16_duplex(struct bfin_spi_master *drv_data)
+static void adi_spi_u16_duplex(struct adi_spi_master *drv_data)
 {
 	dummy_read(drv_data);
 	while (drv_data->rx < drv_data->rx_end) {
-		bfin_write(&drv_data->regs->tfifo, (*(u16 *)drv_data->tx));
+		iowrite32(*(u16 *)drv_data->tx, &drv_data->regs->tfifo);
 		drv_data->tx += 2;
-		while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+		while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
 			cpu_relax();
-		*(u16 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo);
+		*(u16 *)drv_data->rx = ioread32(&drv_data->regs->rfifo);
 		drv_data->rx += 2;
 	}
 }
 
-static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u16 = {
-	.write  = bfin_spi_u16_write,
-	.read   = bfin_spi_u16_read,
-	.duplex = bfin_spi_u16_duplex,
+static const struct adi_spi_transfer_ops adi_spi_transfer_ops_u16 = {
+	.write  = adi_spi_u16_write,
+	.read   = adi_spi_u16_read,
+	.duplex = adi_spi_u16_duplex,
 };
 
-static void bfin_spi_u32_write(struct bfin_spi_master *drv_data)
+static void adi_spi_u32_write(struct adi_spi_master *drv_data)
 {
 	dummy_read(drv_data);
 	while (drv_data->tx < drv_data->tx_end) {
-		bfin_write(&drv_data->regs->tfifo, (*(u32 *)drv_data->tx));
+		iowrite32(*(u32 *)drv_data->tx, &drv_data->regs->tfifo);
 		drv_data->tx += 4;
-		while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+		while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
 			cpu_relax();
-		bfin_read(&drv_data->regs->rfifo);
+		ioread32(&drv_data->regs->rfifo);
 	}
 }
 
-static void bfin_spi_u32_read(struct bfin_spi_master *drv_data)
+static void adi_spi_u32_read(struct adi_spi_master *drv_data)
 {
 	u32 tx_val = drv_data->cur_chip->tx_dummy_val;
 
 	dummy_read(drv_data);
 	while (drv_data->rx < drv_data->rx_end) {
-		bfin_write(&drv_data->regs->tfifo, tx_val);
-		while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+		iowrite32(tx_val, &drv_data->regs->tfifo);
+		while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
 			cpu_relax();
-		*(u32 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo);
+		*(u32 *)drv_data->rx = ioread32(&drv_data->regs->rfifo);
 		drv_data->rx += 4;
 	}
 }
 
-static void bfin_spi_u32_duplex(struct bfin_spi_master *drv_data)
+static void adi_spi_u32_duplex(struct adi_spi_master *drv_data)
 {
 	dummy_read(drv_data);
 	while (drv_data->rx < drv_data->rx_end) {
-		bfin_write(&drv_data->regs->tfifo, (*(u32 *)drv_data->tx));
+		iowrite32(*(u32 *)drv_data->tx, &drv_data->regs->tfifo);
 		drv_data->tx += 4;
-		while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+		while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
 			cpu_relax();
-		*(u32 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo);
+		*(u32 *)drv_data->rx = ioread32(&drv_data->regs->rfifo);
 		drv_data->rx += 4;
 	}
 }
 
-static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u32 = {
-	.write  = bfin_spi_u32_write,
-	.read   = bfin_spi_u32_read,
-	.duplex = bfin_spi_u32_duplex,
+static const struct adi_spi_transfer_ops adi_spi_transfer_ops_u32 = {
+	.write  = adi_spi_u32_write,
+	.read   = adi_spi_u32_read,
+	.duplex = adi_spi_u32_duplex,
 };
 
 
 /* test if there is more transfer to be done */
-static void bfin_spi_next_transfer(struct bfin_spi_master *drv)
+static void adi_spi_next_transfer(struct adi_spi_master *drv)
 {
 	struct spi_message *msg = drv->cur_msg;
 	struct spi_transfer *t = drv->cur_transfer;
@@ -360,15 +381,15 @@ static void bfin_spi_next_transfer(struct bfin_spi_master *drv)
 	}
 }
 
-static void bfin_spi_giveback(struct bfin_spi_master *drv_data)
+static void adi_spi_giveback(struct adi_spi_master *drv_data)
 {
-	struct bfin_spi_device *chip = drv_data->cur_chip;
+	struct adi_spi_device *chip = drv_data->cur_chip;
 
-	bfin_spi_cs_deactive(drv_data, chip);
+	adi_spi_cs_deactive(drv_data, chip);
 	spi_finalize_current_message(drv_data->master);
 }
 
-static int bfin_spi_setup_transfer(struct bfin_spi_master *drv)
+static int adi_spi_setup_transfer(struct adi_spi_master *drv)
 {
 	struct spi_transfer *t = drv->cur_transfer;
 	u32 cr, cr_width;
@@ -393,34 +414,33 @@ static int bfin_spi_setup_transfer(struct bfin_spi_master *drv)
 	switch (t->bits_per_word) {
 	case 8:
 		cr_width = SPI_CTL_SIZE08;
-		drv->ops = &bfin_bfin_spi_transfer_ops_u8;
+		drv->ops = &adi_spi_transfer_ops_u8;
 		break;
 	case 16:
 		cr_width = SPI_CTL_SIZE16;
-		drv->ops = &bfin_bfin_spi_transfer_ops_u16;
+		drv->ops = &adi_spi_transfer_ops_u16;
 		break;
 	case 32:
 		cr_width = SPI_CTL_SIZE32;
-		drv->ops = &bfin_bfin_spi_transfer_ops_u32;
+		drv->ops = &adi_spi_transfer_ops_u32;
 		break;
 	default:
 		return -EINVAL;
 	}
-	cr = bfin_read(&drv->regs->control) & ~SPI_CTL_SIZE;
+	cr = ioread32(&drv->regs->control) & ~SPI_CTL_SIZE;
 	cr |= cr_width;
-	bfin_write(&drv->regs->control, cr);
+	iowrite32(cr, &drv->regs->control);
 
 	/* speed setup */
-	bfin_write(&drv->regs->clock,
-			hz_to_spi_clock(drv->sclk, t->speed_hz));
+	iowrite32(hz_to_spi_clock(drv->sclk, t->speed_hz), &drv->regs->clock);
 	return 0;
 }
 
-static int bfin_spi_dma_xfer(struct bfin_spi_master *drv_data)
+static int adi_spi_dma_xfer(struct adi_spi_master *drv_data)
 {
 	struct spi_transfer *t = drv_data->cur_transfer;
 	struct spi_message *msg = drv_data->cur_msg;
-	struct bfin_spi_device *chip = drv_data->cur_chip;
+	struct adi_spi_device *chip = drv_data->cur_chip;
 	u32 dma_config;
 	unsigned long word_count, word_size;
 	void *tx_buf, *rx_buf;
@@ -498,17 +518,16 @@ static int bfin_spi_dma_xfer(struct bfin_spi_master *drv_data)
 	set_dma_config(drv_data->rx_dma, dma_config | WNR);
 	enable_dma(drv_data->tx_dma);
 	enable_dma(drv_data->rx_dma);
-	SSYNC();
 
-	bfin_write(&drv_data->regs->rx_control, SPI_RXCTL_REN | SPI_RXCTL_RDR_NE);
-	SSYNC();
-	bfin_write(&drv_data->regs->tx_control,
-			SPI_TXCTL_TEN | SPI_TXCTL_TTI | SPI_TXCTL_TDR_NF);
+	iowrite32(SPI_RXCTL_REN | SPI_RXCTL_RDR_NE,
+			&drv_data->regs->rx_control);
+	iowrite32(SPI_TXCTL_TEN | SPI_TXCTL_TTI | SPI_TXCTL_TDR_NF,
+			&drv_data->regs->tx_control);
 
 	return 0;
 }
 
-static int bfin_spi_pio_xfer(struct bfin_spi_master *drv_data)
+static int adi_spi_pio_xfer(struct adi_spi_master *drv_data)
 {
 	struct spi_message *msg = drv_data->cur_msg;
 
@@ -529,19 +548,19 @@ static int bfin_spi_pio_xfer(struct bfin_spi_master *drv_data)
 			return -EIO;
 	}
 
-	if (!bfin_spi_flush(drv_data))
+	if (!adi_spi_flush(drv_data))
 		return -EIO;
 	msg->actual_length += drv_data->transfer_len;
 	tasklet_schedule(&drv_data->pump_transfers);
 	return 0;
 }
 
-static void bfin_spi_pump_transfers(unsigned long data)
+static void adi_spi_pump_transfers(unsigned long data)
 {
-	struct bfin_spi_master *drv_data = (struct bfin_spi_master *)data;
+	struct adi_spi_master *drv_data = (struct adi_spi_master *)data;
 	struct spi_message *msg = NULL;
 	struct spi_transfer *t = NULL;
-	struct bfin_spi_device *chip = NULL;
+	struct adi_spi_device *chip = NULL;
 	int ret;
 
 	/* Get current state information */
@@ -552,7 +571,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
 	/* Handle for abort */
 	if (drv_data->state == ERROR_STATE) {
 		msg->status = -EIO;
-		bfin_spi_giveback(drv_data);
+		adi_spi_giveback(drv_data);
 		return;
 	}
 
@@ -560,14 +579,14 @@ static void bfin_spi_pump_transfers(unsigned long data)
 		if (t->delay_usecs)
 			udelay(t->delay_usecs);
 		if (t->cs_change)
-			bfin_spi_cs_deactive(drv_data, chip);
-		bfin_spi_next_transfer(drv_data);
+			adi_spi_cs_deactive(drv_data, chip);
+		adi_spi_next_transfer(drv_data);
 		t = drv_data->cur_transfer;
 	}
 	/* Handle end of message */
 	if (drv_data->state == DONE_STATE) {
 		msg->status = 0;
-		bfin_spi_giveback(drv_data);
+		adi_spi_giveback(drv_data);
 		return;
 	}
 
@@ -577,34 +596,34 @@ static void bfin_spi_pump_transfers(unsigned long data)
 		return;
 	}
 
-	ret = bfin_spi_setup_transfer(drv_data);
+	ret = adi_spi_setup_transfer(drv_data);
 	if (ret) {
 		msg->status = ret;
-		bfin_spi_giveback(drv_data);
+		adi_spi_giveback(drv_data);
 	}
 
-	bfin_write(&drv_data->regs->status, 0xFFFFFFFF);
-	bfin_spi_cs_active(drv_data, chip);
+	iowrite32(0xFFFFFFFF, &drv_data->regs->status);
+	adi_spi_cs_active(drv_data, chip);
 	drv_data->state = RUNNING_STATE;
 
 	if (chip->enable_dma)
-		ret = bfin_spi_dma_xfer(drv_data);
+		ret = adi_spi_dma_xfer(drv_data);
 	else
-		ret = bfin_spi_pio_xfer(drv_data);
+		ret = adi_spi_pio_xfer(drv_data);
 	if (ret) {
 		msg->status = ret;
-		bfin_spi_giveback(drv_data);
+		adi_spi_giveback(drv_data);
 	}
 }
 
-static int bfin_spi_transfer_one_message(struct spi_master *master,
+static int adi_spi_transfer_one_message(struct spi_master *master,
 					struct spi_message *m)
 {
-	struct bfin_spi_master *drv_data = spi_master_get_devdata(master);
+	struct adi_spi_master *drv_data = spi_master_get_devdata(master);
 
 	drv_data->cur_msg = m;
 	drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
-	bfin_spi_restore_state(drv_data);
+	adi_spi_restore_state(drv_data);
 
 	drv_data->state = START_STATE;
 	drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
@@ -630,15 +649,15 @@ static const u16 ssel[][MAX_SPI_SSEL] = {
 	P_SPI2_SSEL6, P_SPI2_SSEL7},
 };
 
-static int bfin_spi_setup(struct spi_device *spi)
+static int adi_spi_setup(struct spi_device *spi)
 {
-	struct bfin_spi_master *drv_data = spi_master_get_devdata(spi->master);
-	struct bfin_spi_device *chip = spi_get_ctldata(spi);
-	u32 bfin_ctl_reg = SPI_CTL_ODM | SPI_CTL_PSSE;
+	struct adi_spi_master *drv_data = spi_master_get_devdata(spi->master);
+	struct adi_spi_device *chip = spi_get_ctldata(spi);
+	u32 ctl_reg = SPI_CTL_ODM | SPI_CTL_PSSE;
 	int ret = -EINVAL;
 
 	if (!chip) {
-		struct bfin_spi3_chip *chip_info = spi->controller_data;
+		struct adi_spi3_chip *chip_info = spi->controller_data;
 
 		chip = kzalloc(sizeof(*chip), GFP_KERNEL);
 		if (!chip) {
@@ -646,7 +665,7 @@ static int bfin_spi_setup(struct spi_device *spi)
 			return -ENOMEM;
 		}
 		if (chip_info) {
-			if (chip_info->control & ~bfin_ctl_reg) {
+			if (chip_info->control & ~ctl_reg) {
 				dev_err(&spi->dev,
 					"do not set bits that the SPI framework manages\n");
 				goto error;
@@ -657,6 +676,7 @@ static int bfin_spi_setup(struct spi_device *spi)
 			chip->enable_dma = chip_info->enable_dma;
 		}
 		chip->cs = spi->chip_select;
+
 		if (chip->cs < MAX_CTRL_CS) {
 			chip->ssel = (1 << chip->cs) << 8;
 			ret = peripheral_request(ssel[spi->master->bus_num]
@@ -678,7 +698,7 @@ static int bfin_spi_setup(struct spi_device *spi)
 	}
 
 	/* force a default base state */
-	chip->control &= bfin_ctl_reg;
+	chip->control &= ctl_reg;
 
 	if (spi->mode & SPI_CPOL)
 		chip->control |= SPI_CTL_CPOL;
@@ -692,8 +712,8 @@ static int bfin_spi_setup(struct spi_device *spi)
 
 	chip->clock = hz_to_spi_clock(drv_data->sclk, spi->max_speed_hz);
 
-	bfin_spi_cs_enable(drv_data, chip);
-	bfin_spi_cs_deactive(drv_data, chip);
+	adi_spi_cs_enable(drv_data, chip);
+	adi_spi_cs_deactive(drv_data, chip);
 
 	return 0;
 error:
@@ -705,10 +725,10 @@ static int bfin_spi_setup(struct spi_device *spi)
 	return ret;
 }
 
-static void bfin_spi_cleanup(struct spi_device *spi)
+static void adi_spi_cleanup(struct spi_device *spi)
 {
-	struct bfin_spi_device *chip = spi_get_ctldata(spi);
-	struct bfin_spi_master *drv_data = spi_master_get_devdata(spi->master);
+	struct adi_spi_device *chip = spi_get_ctldata(spi);
+	struct adi_spi_master *drv_data = spi_master_get_devdata(spi->master);
 
 	if (!chip)
 		return;
@@ -716,7 +736,7 @@ static void bfin_spi_cleanup(struct spi_device *spi)
 	if (chip->cs < MAX_CTRL_CS) {
 		peripheral_free(ssel[spi->master->bus_num]
 					[chip->cs-1]);
-		bfin_spi_cs_disable(drv_data, chip);
+		adi_spi_cs_disable(drv_data, chip);
 	} else {
 		gpio_free(chip->cs_gpio);
 	}
@@ -725,10 +745,11 @@ static void bfin_spi_cleanup(struct spi_device *spi)
 	spi_set_ctldata(spi, NULL);
 }
 
-static irqreturn_t bfin_spi_tx_dma_isr(int irq, void *dev_id)
+static irqreturn_t adi_spi_tx_dma_isr(int irq, void *dev_id)
 {
-	struct bfin_spi_master *drv_data = dev_id;
+	struct adi_spi_master *drv_data = dev_id;
 	u32 dma_stat = get_dma_curr_irqstat(drv_data->tx_dma);
+	u32 tx_ctl;
 
 	clear_dma_irqstat(drv_data->tx_dma);
 	if (dma_stat & DMA_DONE) {
@@ -739,13 +760,15 @@ static irqreturn_t bfin_spi_tx_dma_isr(int irq, void *dev_id)
 		if (drv_data->tx)
 			drv_data->state = ERROR_STATE;
 	}
-	bfin_write_and(&drv_data->regs->tx_control, ~SPI_TXCTL_TDR_NF);
+	tx_ctl = ioread32(&drv_data->regs->tx_control);
+	tx_ctl &= ~SPI_TXCTL_TDR_NF;
+	iowrite32(tx_ctl, &drv_data->regs->tx_control);
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t bfin_spi_rx_dma_isr(int irq, void *dev_id)
+static irqreturn_t adi_spi_rx_dma_isr(int irq, void *dev_id)
 {
-	struct bfin_spi_master *drv_data = dev_id;
+	struct adi_spi_master *drv_data = dev_id;
 	struct spi_message *msg = drv_data->cur_msg;
 	u32 dma_stat = get_dma_curr_irqstat(drv_data->rx_dma);
 
@@ -760,8 +783,8 @@ static irqreturn_t bfin_spi_rx_dma_isr(int irq, void *dev_id)
 		dev_err(&drv_data->master->dev,
 				"spi rx dma error: %d\n", dma_stat);
 	}
-	bfin_write(&drv_data->regs->tx_control, 0);
-	bfin_write(&drv_data->regs->rx_control, 0);
+	iowrite32(0, &drv_data->regs->tx_control);
+	iowrite32(0, &drv_data->regs->rx_control);
 	if (drv_data->rx_num != drv_data->tx_num)
 		dev_dbg(&drv_data->master->dev,
 				"dma interrupt missing: tx=%d,rx=%d\n",
@@ -770,15 +793,15 @@ static irqreturn_t bfin_spi_rx_dma_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int bfin_spi_probe(struct platform_device *pdev)
+static int adi_spi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct bfin_spi3_master *info = dev_get_platdata(dev);
+	struct adi_spi3_master *info = dev_get_platdata(dev);
 	struct spi_master *master;
-	struct bfin_spi_master *drv_data;
+	struct adi_spi_master *drv_data;
 	struct resource *mem, *res;
 	unsigned int tx_dma, rx_dma;
-	unsigned long sclk;
+	struct clk *sclk;
 	int ret;
 
 	if (!info) {
@@ -786,10 +809,10 @@ static int bfin_spi_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	sclk = get_sclk1();
-	if (!sclk) {
-		dev_err(dev, "can not get sclk1\n");
-		return -ENXIO;
+	sclk = devm_clk_get(dev, "spi");
+	if (IS_ERR(sclk)) {
+		dev_err(dev, "can not get spi clock\n");
+		return PTR_ERR(sclk);
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
@@ -819,9 +842,9 @@ static int bfin_spi_probe(struct platform_device *pdev)
 
 	master->bus_num = pdev->id;
 	master->num_chipselect = info->num_chipselect;
-	master->cleanup = bfin_spi_cleanup;
-	master->setup = bfin_spi_setup;
-	master->transfer_one_message = bfin_spi_transfer_one_message;
+	master->cleanup = adi_spi_cleanup;
+	master->setup = adi_spi_setup;
+	master->transfer_one_message = adi_spi_transfer_one_message;
 	master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) |
 				     SPI_BPW_MASK(8);
 
@@ -830,7 +853,7 @@ static int bfin_spi_probe(struct platform_device *pdev)
 	drv_data->tx_dma = tx_dma;
 	drv_data->rx_dma = rx_dma;
 	drv_data->pin_req = info->pin_req;
-	drv_data->sclk = sclk;
+	drv_data->sclk = clk_get_rate(sclk);
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	drv_data->regs = devm_ioremap_resource(dev, mem);
@@ -845,28 +868,28 @@ static int bfin_spi_probe(struct platform_device *pdev)
 		dev_err(dev, "can not request SPI TX DMA channel\n");
 		goto err_put_master;
 	}
-	set_dma_callback(tx_dma, bfin_spi_tx_dma_isr, drv_data);
+	set_dma_callback(tx_dma, adi_spi_tx_dma_isr, drv_data);
 
 	ret = request_dma(rx_dma, "SPI_RX_DMA");
 	if (ret) {
 		dev_err(dev, "can not request SPI RX DMA channel\n");
 		goto err_free_tx_dma;
 	}
-	set_dma_callback(drv_data->rx_dma, bfin_spi_rx_dma_isr, drv_data);
+	set_dma_callback(drv_data->rx_dma, adi_spi_rx_dma_isr, drv_data);
 
 	/* request CLK, MOSI and MISO */
-	ret = peripheral_request_list(drv_data->pin_req, "bfin-spi3");
+	ret = peripheral_request_list(drv_data->pin_req, "adi-spi3");
 	if (ret < 0) {
 		dev_err(dev, "can not request spi pins\n");
 		goto err_free_rx_dma;
 	}
 
-	bfin_write(&drv_data->regs->control, SPI_CTL_MSTR | SPI_CTL_CPHA);
-	bfin_write(&drv_data->regs->ssel, 0x0000FE00);
-	bfin_write(&drv_data->regs->delay, 0x0);
+	iowrite32(SPI_CTL_MSTR | SPI_CTL_CPHA, &drv_data->regs->control);
+	iowrite32(0x0000FE00, &drv_data->regs->ssel);
+	iowrite32(0x0, &drv_data->regs->delay);
 
 	tasklet_init(&drv_data->pump_transfers,
-			bfin_spi_pump_transfers, (unsigned long)drv_data);
+			adi_spi_pump_transfers, (unsigned long)drv_data);
 	/* register with the SPI framework */
 	ret = devm_spi_register_master(dev, master);
 	if (ret) {
@@ -888,43 +911,41 @@ static int bfin_spi_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int bfin_spi_remove(struct platform_device *pdev)
+static int adi_spi_remove(struct platform_device *pdev)
 {
 	struct spi_master *master = platform_get_drvdata(pdev);
-	struct bfin_spi_master *drv_data = spi_master_get_devdata(master);
-
-	bfin_spi_disable(drv_data);
+	struct adi_spi_master *drv_data = spi_master_get_devdata(master);
 
+	adi_spi_disable(drv_data);
 	peripheral_free_list(drv_data->pin_req);
 	free_dma(drv_data->rx_dma);
 	free_dma(drv_data->tx_dma);
-
 	return 0;
 }
 
 #ifdef CONFIG_PM
-static int bfin_spi_suspend(struct device *dev)
+static int adi_spi_suspend(struct device *dev)
 {
 	struct spi_master *master = dev_get_drvdata(dev);
-	struct bfin_spi_master *drv_data = spi_master_get_devdata(master);
+	struct adi_spi_master *drv_data = spi_master_get_devdata(master);
 
 	spi_master_suspend(master);
 
-	drv_data->control = bfin_read(&drv_data->regs->control);
-	drv_data->ssel = bfin_read(&drv_data->regs->ssel);
+	drv_data->control = ioread32(&drv_data->regs->control);
+	drv_data->ssel = ioread32(&drv_data->regs->ssel);
 
-	bfin_write(&drv_data->regs->control, SPI_CTL_MSTR | SPI_CTL_CPHA);
-	bfin_write(&drv_data->regs->ssel, 0x0000FE00);
+	iowrite32(SPI_CTL_MSTR | SPI_CTL_CPHA, &drv_data->regs->control);
+	iowrite32(0x0000FE00, &drv_data->regs->ssel);
 	dma_disable_irq(drv_data->rx_dma);
 	dma_disable_irq(drv_data->tx_dma);
 
 	return 0;
 }
 
-static int bfin_spi_resume(struct device *dev)
+static int adi_spi_resume(struct device *dev)
 {
 	struct spi_master *master = dev_get_drvdata(dev);
-	struct bfin_spi_master *drv_data = spi_master_get_devdata(master);
+	struct adi_spi_master *drv_data = spi_master_get_devdata(master);
 	int ret = 0;
 
 	/* bootrom may modify spi and dma status when resume in spi boot mode */
@@ -932,8 +953,8 @@ static int bfin_spi_resume(struct device *dev)
 
 	dma_enable_irq(drv_data->rx_dma);
 	dma_enable_irq(drv_data->tx_dma);
-	bfin_write(&drv_data->regs->control, drv_data->control);
-	bfin_write(&drv_data->regs->ssel, drv_data->ssel);
+	iowrite32(drv_data->control, &drv_data->regs->control);
+	iowrite32(drv_data->ssel, &drv_data->regs->ssel);
 
 	ret = spi_master_resume(master);
 	if (ret) {
@@ -944,21 +965,21 @@ static int bfin_spi_resume(struct device *dev)
 	return ret;
 }
 #endif
-static const struct dev_pm_ops bfin_spi_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(bfin_spi_suspend, bfin_spi_resume)
+static const struct dev_pm_ops adi_spi_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(adi_spi_suspend, adi_spi_resume)
 };
 
-MODULE_ALIAS("platform:bfin-spi3");
-static struct platform_driver bfin_spi_driver = {
+MODULE_ALIAS("platform:adi-spi3");
+static struct platform_driver adi_spi_driver = {
 	.driver	= {
-		.name	= "bfin-spi3",
+		.name	= "adi-spi3",
 		.owner	= THIS_MODULE,
-		.pm     = &bfin_spi_pm_ops,
+		.pm     = &adi_spi_pm_ops,
 	},
-	.remove		= bfin_spi_remove,
+	.remove		= adi_spi_remove,
 };
 
-module_platform_driver_probe(bfin_spi_driver, bfin_spi_probe);
+module_platform_driver_probe(adi_spi_driver, adi_spi_probe);
 
 MODULE_DESCRIPTION("Analog Devices SPI3 controller driver");
 MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>");
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 079e6b1b0cdb..92a6f0d93233 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -224,7 +224,7 @@ struct atmel_spi {
 	struct platform_device	*pdev;
 
 	struct spi_transfer	*current_transfer;
-	unsigned long		current_remaining_bytes;
+	int			current_remaining_bytes;
 	int			done_status;
 
 	struct completion	xfer_completion;
@@ -874,8 +874,9 @@ atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer)
 		spi_readl(as, RDR);
 	}
 	if (xfer->bits_per_word > 8) {
-		as->current_remaining_bytes -= 2;
-		if (as->current_remaining_bytes < 0)
+		if (as->current_remaining_bytes > 2)
+			as->current_remaining_bytes -= 2;
+		else
 			as->current_remaining_bytes = 0;
 	} else {
 		as->current_remaining_bytes--;
@@ -1110,6 +1111,8 @@ static int atmel_spi_one_transfer(struct spi_master *master,
 				atmel_spi_next_xfer_pio(master, xfer);
 			} else {
 				as->current_remaining_bytes -= len;
+				if (as->current_remaining_bytes < 0)
+					as->current_remaining_bytes = 0;
 			}
 		} else {
 			atmel_spi_next_xfer_pio(master, xfer);
diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c
new file mode 100644
index 000000000000..bb758978465d
--- /dev/null
+++ b/drivers/spi/spi-cadence.c
@@ -0,0 +1,673 @@
+/*
+ * Cadence SPI controller driver (master mode only)
+ *
+ * Copyright (C) 2008 - 2014 Xilinx, Inc.
+ *
+ * based on Blackfin On-Chip SPI Driver (spi_bfin5xx.c)
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+/* Name of this driver */
+#define CDNS_SPI_NAME		"cdns-spi"
+
+/* Register offset definitions */
+#define CDNS_SPI_CR_OFFSET	0x00 /* Configuration  Register, RW */
+#define CDNS_SPI_ISR_OFFSET	0x04 /* Interrupt Status Register, RO */
+#define CDNS_SPI_IER_OFFSET	0x08 /* Interrupt Enable Register, WO */
+#define CDNS_SPI_IDR_OFFSET	0x0c /* Interrupt Disable Register, WO */
+#define CDNS_SPI_IMR_OFFSET	0x10 /* Interrupt Enabled Mask Register, RO */
+#define CDNS_SPI_ER_OFFSET	0x14 /* Enable/Disable Register, RW */
+#define CDNS_SPI_DR_OFFSET	0x18 /* Delay Register, RW */
+#define CDNS_SPI_TXD_OFFSET	0x1C /* Data Transmit Register, WO */
+#define CDNS_SPI_RXD_OFFSET	0x20 /* Data Receive Register, RO */
+#define CDNS_SPI_SICR_OFFSET	0x24 /* Slave Idle Count Register, RW */
+#define CDNS_SPI_THLD_OFFSET	0x28 /* Transmit FIFO Watermark Register,RW */
+
+/*
+ * SPI Configuration Register bit Masks
+ *
+ * This register contains various control bits that affect the operation
+ * of the SPI controller
+ */
+#define CDNS_SPI_CR_MANSTRT_MASK	0x00010000 /* Manual TX Start */
+#define CDNS_SPI_CR_CPHA_MASK		0x00000004 /* Clock Phase Control */
+#define CDNS_SPI_CR_CPOL_MASK		0x00000002 /* Clock Polarity Control */
+#define CDNS_SPI_CR_SSCTRL_MASK		0x00003C00 /* Slave Select Mask */
+#define CDNS_SPI_CR_BAUD_DIV_MASK	0x00000038 /* Baud Rate Divisor Mask */
+#define CDNS_SPI_CR_MSTREN_MASK		0x00000001 /* Master Enable Mask */
+#define CDNS_SPI_CR_MANSTRTEN_MASK	0x00008000 /* Manual TX Enable Mask */
+#define CDNS_SPI_CR_SSFORCE_MASK	0x00004000 /* Manual SS Enable Mask */
+#define CDNS_SPI_CR_BAUD_DIV_4_MASK	0x00000008 /* Default Baud Div Mask */
+#define CDNS_SPI_CR_DEFAULT_MASK	(CDNS_SPI_CR_MSTREN_MASK | \
+					CDNS_SPI_CR_SSCTRL_MASK | \
+					CDNS_SPI_CR_SSFORCE_MASK | \
+					CDNS_SPI_CR_BAUD_DIV_4_MASK)
+
+/*
+ * SPI Configuration Register - Baud rate and slave select
+ *
+ * These are the values used in the calculation of baud rate divisor and
+ * setting the slave select.
+ */
+
+#define CDNS_SPI_BAUD_DIV_MAX		7 /* Baud rate divisor maximum */
+#define CDNS_SPI_BAUD_DIV_MIN		1 /* Baud rate divisor minimum */
+#define CDNS_SPI_BAUD_DIV_SHIFT		3 /* Baud rate divisor shift in CR */
+#define CDNS_SPI_SS_SHIFT		10 /* Slave Select field shift in CR */
+#define CDNS_SPI_SS0			0x1 /* Slave Select zero */
+
+/*
+ * SPI Interrupt Registers bit Masks
+ *
+ * All the four interrupt registers (Status/Mask/Enable/Disable) have the same
+ * bit definitions.
+ */
+#define CDNS_SPI_IXR_TXOW_MASK	0x00000004 /* SPI TX FIFO Overwater */
+#define CDNS_SPI_IXR_MODF_MASK	0x00000002 /* SPI Mode Fault */
+#define CDNS_SPI_IXR_RXNEMTY_MASK 0x00000010 /* SPI RX FIFO Not Empty */
+#define CDNS_SPI_IXR_DEFAULT_MASK	(CDNS_SPI_IXR_TXOW_MASK | \
+					CDNS_SPI_IXR_MODF_MASK)
+#define CDNS_SPI_IXR_TXFULL_MASK	0x00000008 /* SPI TX Full */
+#define CDNS_SPI_IXR_ALL_MASK	0x0000007F /* SPI all interrupts */
+
+/*
+ * SPI Enable Register bit Masks
+ *
+ * This register is used to enable or disable the SPI controller
+ */
+#define CDNS_SPI_ER_ENABLE_MASK	0x00000001 /* SPI Enable Bit Mask */
+#define CDNS_SPI_ER_DISABLE_MASK	0x0 /* SPI Disable Bit Mask */
+
+/* SPI FIFO depth in bytes */
+#define CDNS_SPI_FIFO_DEPTH	128
+
+/* Default number of chip select lines */
+#define CDNS_SPI_DEFAULT_NUM_CS		4
+
+/**
+ * struct cdns_spi - This definition defines spi driver instance
+ * @regs:		Virtual address of the SPI controller registers
+ * @ref_clk:		Pointer to the peripheral clock
+ * @pclk:		Pointer to the APB clock
+ * @speed_hz:		Current SPI bus clock speed in Hz
+ * @txbuf:		Pointer	to the TX buffer
+ * @rxbuf:		Pointer to the RX buffer
+ * @tx_bytes:		Number of bytes left to transfer
+ * @rx_bytes:		Number of bytes requested
+ * @dev_busy:		Device busy flag
+ * @is_decoded_cs:	Flag for decoder property set or not
+ */
+struct cdns_spi {
+	void __iomem *regs;
+	struct clk *ref_clk;
+	struct clk *pclk;
+	u32 speed_hz;
+	const u8 *txbuf;
+	u8 *rxbuf;
+	int tx_bytes;
+	int rx_bytes;
+	u8 dev_busy;
+	u32 is_decoded_cs;
+};
+
+/* Macros for the SPI controller read/write */
+static inline u32 cdns_spi_read(struct cdns_spi *xspi, u32 offset)
+{
+	return readl_relaxed(xspi->regs + offset);
+}
+
+static inline void cdns_spi_write(struct cdns_spi *xspi, u32 offset, u32 val)
+{
+	writel_relaxed(val, xspi->regs + offset);
+}
+
+/**
+ * cdns_spi_init_hw - Initialize the hardware and configure the SPI controller
+ * @xspi:	Pointer to the cdns_spi structure
+ *
+ * On reset the SPI controller is configured to be in master mode, baud rate
+ * divisor is set to 4, threshold value for TX FIFO not full interrupt is set
+ * to 1 and size of the word to be transferred as 8 bit.
+ * This function initializes the SPI controller to disable and clear all the
+ * interrupts, enable manual slave select and manual start, deselect all the
+ * chip select lines, and enable the SPI controller.
+ */
+static void cdns_spi_init_hw(struct cdns_spi *xspi)
+{
+	cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET,
+		       CDNS_SPI_ER_DISABLE_MASK);
+	cdns_spi_write(xspi, CDNS_SPI_IDR_OFFSET,
+		       CDNS_SPI_IXR_ALL_MASK);
+
+	/* Clear the RX FIFO */
+	while (cdns_spi_read(xspi, CDNS_SPI_ISR_OFFSET) &
+	       CDNS_SPI_IXR_RXNEMTY_MASK)
+		cdns_spi_read(xspi, CDNS_SPI_RXD_OFFSET);
+
+	cdns_spi_write(xspi, CDNS_SPI_ISR_OFFSET,
+		       CDNS_SPI_IXR_ALL_MASK);
+	cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET,
+		       CDNS_SPI_CR_DEFAULT_MASK);
+	cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET,
+		       CDNS_SPI_ER_ENABLE_MASK);
+}
+
+/**
+ * cdns_spi_chipselect - Select or deselect the chip select line
+ * @spi:	Pointer to the spi_device structure
+ * @is_on:	Select(0) or deselect (1) the chip select line
+ */
+static void cdns_spi_chipselect(struct spi_device *spi, bool is_high)
+{
+	struct cdns_spi *xspi = spi_master_get_devdata(spi->master);
+	u32 ctrl_reg;
+
+	ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR_OFFSET);
+
+	if (is_high) {
+		/* Deselect the slave */
+		ctrl_reg |= CDNS_SPI_CR_SSCTRL_MASK;
+	} else {
+		/* Select the slave */
+		ctrl_reg &= ~CDNS_SPI_CR_SSCTRL_MASK;
+		if (!(xspi->is_decoded_cs))
+			ctrl_reg |= ((~(CDNS_SPI_SS0 << spi->chip_select)) <<
+				     CDNS_SPI_SS_SHIFT) &
+				     CDNS_SPI_CR_SSCTRL_MASK;
+		else
+			ctrl_reg |= (spi->chip_select << CDNS_SPI_SS_SHIFT) &
+				     CDNS_SPI_CR_SSCTRL_MASK;
+	}
+
+	cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, ctrl_reg);
+}
+
+/**
+ * cdns_spi_config_clock_mode - Sets clock polarity and phase
+ * @spi:	Pointer to the spi_device structure
+ *
+ * Sets the requested clock polarity and phase.
+ */
+static void cdns_spi_config_clock_mode(struct spi_device *spi)
+{
+	struct cdns_spi *xspi = spi_master_get_devdata(spi->master);
+	u32 ctrl_reg;
+
+	ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR_OFFSET);
+
+	/* Set the SPI clock phase and clock polarity */
+	ctrl_reg &= ~(CDNS_SPI_CR_CPHA_MASK | CDNS_SPI_CR_CPOL_MASK);
+	if (spi->mode & SPI_CPHA)
+		ctrl_reg |= CDNS_SPI_CR_CPHA_MASK;
+	if (spi->mode & SPI_CPOL)
+		ctrl_reg |= CDNS_SPI_CR_CPOL_MASK;
+
+	cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, ctrl_reg);
+}
+
+/**
+ * cdns_spi_config_clock_freq - Sets clock frequency
+ * @spi:	Pointer to the spi_device structure
+ * @transfer:	Pointer to the spi_transfer structure which provides
+ *		information about next transfer setup parameters
+ *
+ * Sets the requested clock frequency.
+ * Note: If the requested frequency is not an exact match with what can be
+ * obtained using the prescalar value the driver sets the clock frequency which
+ * is lower than the requested frequency (maximum lower) for the transfer. If
+ * the requested frequency is higher or lower than that is supported by the SPI
+ * controller the driver will set the highest or lowest frequency supported by
+ * controller.
+ */
+static void cdns_spi_config_clock_freq(struct spi_device *spi,
+				  struct spi_transfer *transfer)
+{
+	struct cdns_spi *xspi = spi_master_get_devdata(spi->master);
+	u32 ctrl_reg, baud_rate_val;
+	unsigned long frequency;
+
+	frequency = clk_get_rate(xspi->ref_clk);
+
+	ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR_OFFSET);
+
+	/* Set the clock frequency */
+	if (xspi->speed_hz != transfer->speed_hz) {
+		/* first valid value is 1 */
+		baud_rate_val = CDNS_SPI_BAUD_DIV_MIN;
+		while ((baud_rate_val < CDNS_SPI_BAUD_DIV_MAX) &&
+		       (frequency / (2 << baud_rate_val)) > transfer->speed_hz)
+			baud_rate_val++;
+
+		ctrl_reg &= ~CDNS_SPI_CR_BAUD_DIV_MASK;
+		ctrl_reg |= baud_rate_val << CDNS_SPI_BAUD_DIV_SHIFT;
+
+		xspi->speed_hz = frequency / (2 << baud_rate_val);
+	}
+	cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, ctrl_reg);
+}
+
+/**
+ * cdns_spi_setup_transfer - Configure SPI controller for specified transfer
+ * @spi:	Pointer to the spi_device structure
+ * @transfer:	Pointer to the spi_transfer structure which provides
+ *		information about next transfer setup parameters
+ *
+ * Sets the operational mode of SPI controller for the next SPI transfer and
+ * sets the requested clock frequency.
+ *
+ * Return:	Always 0
+ */
+static int cdns_spi_setup_transfer(struct spi_device *spi,
+				   struct spi_transfer *transfer)
+{
+	struct cdns_spi *xspi = spi_master_get_devdata(spi->master);
+
+	cdns_spi_config_clock_freq(spi, transfer);
+
+	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u clock speed\n",
+		__func__, spi->mode, spi->bits_per_word,
+		xspi->speed_hz);
+
+	return 0;
+}
+
+/**
+ * cdns_spi_fill_tx_fifo - Fills the TX FIFO with as many bytes as possible
+ * @xspi:	Pointer to the cdns_spi structure
+ */
+static void cdns_spi_fill_tx_fifo(struct cdns_spi *xspi)
+{
+	unsigned long trans_cnt = 0;
+
+	while ((trans_cnt < CDNS_SPI_FIFO_DEPTH) &&
+	       (xspi->tx_bytes > 0)) {
+		if (xspi->txbuf)
+			cdns_spi_write(xspi, CDNS_SPI_TXD_OFFSET,
+				       *xspi->txbuf++);
+		else
+			cdns_spi_write(xspi, CDNS_SPI_TXD_OFFSET, 0);
+
+		xspi->tx_bytes--;
+		trans_cnt++;
+	}
+}
+
+/**
+ * cdns_spi_irq - Interrupt service routine of the SPI controller
+ * @irq:	IRQ number
+ * @dev_id:	Pointer to the xspi structure
+ *
+ * This function handles TX empty and Mode Fault interrupts only.
+ * On TX empty interrupt this function reads the received data from RX FIFO and
+ * fills the TX FIFO if there is any data remaining to be transferred.
+ * On Mode Fault interrupt this function indicates that transfer is completed,
+ * the SPI subsystem will identify the error as the remaining bytes to be
+ * transferred is non-zero.
+ *
+ * Return:	IRQ_HANDLED when handled; IRQ_NONE otherwise.
+ */
+static irqreturn_t cdns_spi_irq(int irq, void *dev_id)
+{
+	struct spi_master *master = dev_id;
+	struct cdns_spi *xspi = spi_master_get_devdata(master);
+	u32 intr_status, status;
+
+	status = IRQ_NONE;
+	intr_status = cdns_spi_read(xspi, CDNS_SPI_ISR_OFFSET);
+	cdns_spi_write(xspi, CDNS_SPI_ISR_OFFSET, intr_status);
+
+	if (intr_status & CDNS_SPI_IXR_MODF_MASK) {
+		/* Indicate that transfer is completed, the SPI subsystem will
+		 * identify the error as the remaining bytes to be
+		 * transferred is non-zero
+		 */
+		cdns_spi_write(xspi, CDNS_SPI_IDR_OFFSET,
+			       CDNS_SPI_IXR_DEFAULT_MASK);
+		spi_finalize_current_transfer(master);
+		status = IRQ_HANDLED;
+	} else if (intr_status & CDNS_SPI_IXR_TXOW_MASK) {
+		unsigned long trans_cnt;
+
+		trans_cnt = xspi->rx_bytes - xspi->tx_bytes;
+
+		/* Read out the data from the RX FIFO */
+		while (trans_cnt) {
+			u8 data;
+
+			data = cdns_spi_read(xspi, CDNS_SPI_RXD_OFFSET);
+			if (xspi->rxbuf)
+				*xspi->rxbuf++ = data;
+
+			xspi->rx_bytes--;
+			trans_cnt--;
+		}
+
+		if (xspi->tx_bytes) {
+			/* There is more data to send */
+			cdns_spi_fill_tx_fifo(xspi);
+		} else {
+			/* Transfer is completed */
+			cdns_spi_write(xspi, CDNS_SPI_IDR_OFFSET,
+				       CDNS_SPI_IXR_DEFAULT_MASK);
+			spi_finalize_current_transfer(master);
+		}
+		status = IRQ_HANDLED;
+	}
+
+	return status;
+}
+
+/**
+ * cdns_transfer_one - Initiates the SPI transfer
+ * @master:	Pointer to spi_master structure
+ * @spi:	Pointer to the spi_device structure
+ * @transfer:	Pointer to the spi_transfer structure which provides
+ *		information about next transfer parameters
+ *
+ * This function fills the TX FIFO, starts the SPI transfer and
+ * returns a positive transfer count so that core will wait for completion.
+ *
+ * Return:	Number of bytes transferred in the last transfer
+ */
+static int cdns_transfer_one(struct spi_master *master,
+			     struct spi_device *spi,
+			     struct spi_transfer *transfer)
+{
+	struct cdns_spi *xspi = spi_master_get_devdata(master);
+
+	xspi->txbuf = transfer->tx_buf;
+	xspi->rxbuf = transfer->rx_buf;
+	xspi->tx_bytes = transfer->len;
+	xspi->rx_bytes = transfer->len;
+
+	cdns_spi_setup_transfer(spi, transfer);
+
+	cdns_spi_fill_tx_fifo(xspi);
+
+	cdns_spi_write(xspi, CDNS_SPI_IER_OFFSET,
+		       CDNS_SPI_IXR_DEFAULT_MASK);
+	return transfer->len;
+}
+
+/**
+ * cdns_prepare_transfer_hardware - Prepares hardware for transfer.
+ * @master:	Pointer to the spi_master structure which provides
+ *		information about the controller.
+ *
+ * This function enables SPI master controller.
+ *
+ * Return:	0 always
+ */
+static int cdns_prepare_transfer_hardware(struct spi_master *master)
+{
+	struct cdns_spi *xspi = spi_master_get_devdata(master);
+
+	cdns_spi_config_clock_mode(master->cur_msg->spi);
+
+	cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET,
+		       CDNS_SPI_ER_ENABLE_MASK);
+
+	return 0;
+}
+
+/**
+ * cdns_unprepare_transfer_hardware - Relaxes hardware after transfer
+ * @master:	Pointer to the spi_master structure which provides
+ *		information about the controller.
+ *
+ * This function disables the SPI master controller.
+ *
+ * Return:	0 always
+ */
+static int cdns_unprepare_transfer_hardware(struct spi_master *master)
+{
+	struct cdns_spi *xspi = spi_master_get_devdata(master);
+
+	cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET,
+		       CDNS_SPI_ER_DISABLE_MASK);
+
+	return 0;
+}
+
+/**
+ * cdns_spi_probe - Probe method for the SPI driver
+ * @pdev:	Pointer to the platform_device structure
+ *
+ * This function initializes the driver data structures and the hardware.
+ *
+ * Return:	0 on success and error value on error
+ */
+static int cdns_spi_probe(struct platform_device *pdev)
+{
+	int ret = 0, irq;
+	struct spi_master *master;
+	struct cdns_spi *xspi;
+	struct resource *res;
+	u32 num_cs;
+
+	master = spi_alloc_master(&pdev->dev, sizeof(*xspi));
+	if (master == NULL)
+		return -ENOMEM;
+
+	xspi = spi_master_get_devdata(master);
+	master->dev.of_node = pdev->dev.of_node;
+	platform_set_drvdata(pdev, master);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	xspi->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(xspi->regs)) {
+		ret = PTR_ERR(xspi->regs);
+		goto remove_master;
+	}
+
+	xspi->pclk = devm_clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(xspi->pclk)) {
+		dev_err(&pdev->dev, "pclk clock not found.\n");
+		ret = PTR_ERR(xspi->pclk);
+		goto remove_master;
+	}
+
+	xspi->ref_clk = devm_clk_get(&pdev->dev, "ref_clk");
+	if (IS_ERR(xspi->ref_clk)) {
+		dev_err(&pdev->dev, "ref_clk clock not found.\n");
+		ret = PTR_ERR(xspi->ref_clk);
+		goto remove_master;
+	}
+
+	ret = clk_prepare_enable(xspi->pclk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable APB clock.\n");
+		goto remove_master;
+	}
+
+	ret = clk_prepare_enable(xspi->ref_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable device clock.\n");
+		goto clk_dis_apb;
+	}
+
+	/* SPI controller initializations */
+	cdns_spi_init_hw(xspi);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		ret = -ENXIO;
+		dev_err(&pdev->dev, "irq number is invalid\n");
+		goto remove_master;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq, cdns_spi_irq,
+			       0, pdev->name, master);
+	if (ret != 0) {
+		ret = -ENXIO;
+		dev_err(&pdev->dev, "request_irq failed\n");
+		goto remove_master;
+	}
+
+	ret = of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs);
+
+	if (ret < 0)
+		master->num_chipselect = CDNS_SPI_DEFAULT_NUM_CS;
+	else
+		master->num_chipselect = num_cs;
+
+	ret = of_property_read_u32(pdev->dev.of_node, "is-decoded-cs",
+				   &xspi->is_decoded_cs);
+
+	if (ret < 0)
+		xspi->is_decoded_cs = 0;
+
+	master->prepare_transfer_hardware = cdns_prepare_transfer_hardware;
+	master->transfer_one = cdns_transfer_one;
+	master->unprepare_transfer_hardware = cdns_unprepare_transfer_hardware;
+	master->set_cs = cdns_spi_chipselect;
+	master->mode_bits = SPI_CPOL | SPI_CPHA;
+
+	/* Set to default valid value */
+	master->max_speed_hz = clk_get_rate(xspi->ref_clk) / 4;
+	xspi->speed_hz = master->max_speed_hz;
+
+	master->bits_per_word_mask = SPI_BPW_MASK(8);
+
+	ret = spi_register_master(master);
+	if (ret) {
+		dev_err(&pdev->dev, "spi_register_master failed\n");
+		goto clk_dis_all;
+	}
+
+	return ret;
+
+clk_dis_all:
+	clk_disable_unprepare(xspi->ref_clk);
+clk_dis_apb:
+	clk_disable_unprepare(xspi->pclk);
+remove_master:
+	spi_master_put(master);
+	return ret;
+}
+
+/**
+ * cdns_spi_remove - Remove method for the SPI driver
+ * @pdev:	Pointer to the platform_device structure
+ *
+ * This function is called if a device is physically removed from the system or
+ * if the driver module is being unloaded. It frees all resources allocated to
+ * the device.
+ *
+ * Return:	0 on success and error value on error
+ */
+static int cdns_spi_remove(struct platform_device *pdev)
+{
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct cdns_spi *xspi = spi_master_get_devdata(master);
+
+	cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET,
+		       CDNS_SPI_ER_DISABLE_MASK);
+
+	clk_disable_unprepare(xspi->ref_clk);
+	clk_disable_unprepare(xspi->pclk);
+
+	spi_unregister_master(master);
+
+	return 0;
+}
+
+/**
+ * cdns_spi_suspend - Suspend method for the SPI driver
+ * @dev:	Address of the platform_device structure
+ *
+ * This function disables the SPI controller and
+ * changes the driver state to "suspend"
+ *
+ * Return:	Always 0
+ */
+static int __maybe_unused cdns_spi_suspend(struct device *dev)
+{
+	struct platform_device *pdev = container_of(dev,
+			struct platform_device, dev);
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct cdns_spi *xspi = spi_master_get_devdata(master);
+
+	spi_master_suspend(master);
+
+	clk_disable_unprepare(xspi->ref_clk);
+
+	clk_disable_unprepare(xspi->pclk);
+
+	return 0;
+}
+
+/**
+ * cdns_spi_resume - Resume method for the SPI driver
+ * @dev:	Address of the platform_device structure
+ *
+ * This function changes the driver state to "ready"
+ *
+ * Return:	0 on success and error value on error
+ */
+static int __maybe_unused cdns_spi_resume(struct device *dev)
+{
+	struct platform_device *pdev = container_of(dev,
+			struct platform_device, dev);
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct cdns_spi *xspi = spi_master_get_devdata(master);
+	int ret = 0;
+
+	ret = clk_prepare_enable(xspi->pclk);
+	if (ret) {
+		dev_err(dev, "Cannot enable APB clock.\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(xspi->ref_clk);
+	if (ret) {
+		dev_err(dev, "Cannot enable device clock.\n");
+		clk_disable(xspi->pclk);
+		return ret;
+	}
+	spi_master_resume(master);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(cdns_spi_dev_pm_ops, cdns_spi_suspend,
+			 cdns_spi_resume);
+
+static struct of_device_id cdns_spi_of_match[] = {
+	{ .compatible = "xlnx,zynq-spi-r1p6" },
+	{ .compatible = "cdns,spi-r1p6" },
+	{ /* end of table */ }
+};
+MODULE_DEVICE_TABLE(of, cdns_spi_of_match);
+
+/* cdns_spi_driver - This structure defines the SPI subsystem platform driver */
+static struct platform_driver cdns_spi_driver = {
+	.probe	= cdns_spi_probe,
+	.remove	= cdns_spi_remove,
+	.driver = {
+		.name = CDNS_SPI_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = cdns_spi_of_match,
+		.pm = &cdns_spi_dev_pm_ops,
+	},
+};
+
+module_platform_driver(cdns_spi_driver);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("Cadence SPI driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/blackfin/include/asm/bfin_spi3.h b/include/linux/spi/adi_spi3.h
similarity index 97%
rename from arch/blackfin/include/asm/bfin_spi3.h
rename to include/linux/spi/adi_spi3.h
index 0957e65a54be..c84123aa1d06 100644
--- a/arch/blackfin/include/asm/bfin_spi3.h
+++ b/include/linux/spi/adi_spi3.h
@@ -1,7 +1,7 @@
 /*
  * Analog Devices SPI3 controller driver
  *
- * Copyright (c) 2011 Analog Devices Inc.
+ * Copyright (c) 2014 Analog Devices Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,14 +11,10 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef _SPI_CHANNEL_H_
-#define _SPI_CHANNEL_H_
+#ifndef _ADI_SPI3_H_
+#define _ADI_SPI3_H_
 
 #include <linux/types.h>
 
@@ -209,9 +205,9 @@
 #define SPI_ILAT_CLR_TFI            0x00000800    /* Transmit Finish Indication */
 
 /*
- * bfin spi3 registers layout
+ * adi spi3 registers layout
  */
-struct bfin_spi_regs {
+struct adi_spi_regs {
 	u32 revid;
 	u32 control;
 	u32 rx_control;
@@ -240,7 +236,7 @@ struct bfin_spi_regs {
 #define MAX_CTRL_CS          8  /* cs in spi controller */
 
 /* device.platform_data for SSP controller devices */
-struct bfin_spi3_master {
+struct adi_spi3_master {
 	u16 num_chipselect;
 	u16 pin_req[7];
 };
@@ -248,11 +244,11 @@ struct bfin_spi3_master {
 /* spi_board_info.controller_data for SPI slave devices,
  * copied to spi_device.platform_data ... mostly for dma tuning
  */
-struct bfin_spi3_chip {
+struct adi_spi3_chip {
 	u32 control;
 	u16 cs_chg_udelay; /* Some devices require 16-bit delays */
 	u32 tx_dummy_val; /* tx value for rx only transfer */
 	bool enable_dma;
 };
 
-#endif /* _SPI_CHANNEL_H_ */
+#endif /* _ADI_SPI3_H_ */