From 0c3b97487d15a452f1fa7bfd9b6f1bd1a31d538d Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 27 Mar 2014 09:26:38 +0800 Subject: [PATCH 1/7] spi: atmel: Make current_remaining_bytes to be int Don't use unsigned for current_remaining_bytes so we can check current_remaining_bytes < 0 case. Use int is enough for current_remaining_bytes. Signed-off-by: Axel Lin Signed-off-by: Wenyou Yang Signed-off-by: Mark Brown --- drivers/spi/spi-atmel.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 8005f9869481..485e6cce94bf 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -224,7 +224,7 @@ struct atmel_spi { struct platform_device *pdev; struct spi_transfer *current_transfer; - unsigned long current_remaining_bytes; + int current_remaining_bytes; int done_status; struct completion xfer_completion; @@ -1110,6 +1110,8 @@ static int atmel_spi_one_transfer(struct spi_master *master, atmel_spi_next_xfer_pio(master, xfer); } else { as->current_remaining_bytes -= len; + if (as->current_remaining_bytes < 0) + as->current_remaining_bytes = 0; } } else { atmel_spi_next_xfer_pio(master, xfer); From 766e3721990d2c78e0d614b57753f105adbaa8c5 Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Fri, 4 Apr 2014 16:27:17 +0800 Subject: [PATCH 2/7] spi: convert spi-bfin-v3.c to a multiplatform driver Spi v3 controller is not only used on Blackfin. So rename it and use ioread/iowrite api to make it work on other platform. Signed-off-by: Scott Jiang Signed-off-by: Mark Brown --- arch/blackfin/mach-bf609/boards/ezkit.c | 22 +- drivers/spi/Kconfig | 4 +- drivers/spi/Makefile | 2 +- drivers/spi/{spi-bfin-v3.c => spi-adi-v3.c} | 420 +++++++++--------- .../linux/spi/adi_spi3.h | 20 +- 5 files changed, 242 insertions(+), 226 deletions(-) rename drivers/spi/{spi-bfin-v3.c => spi-adi-v3.c} (61%) rename arch/blackfin/include/asm/bfin_spi3.h => include/linux/spi/adi_spi3.h (97%) diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c index 943f7e95ec15..1ba4600de69f 100644 --- a/arch/blackfin/mach-bf609/boards/ezkit.c +++ b/arch/blackfin/mach-bf609/boards/ezkit.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include #include #include @@ -767,13 +767,13 @@ static struct flash_platform_data bfin_spi_flash_data = { .type = "w25q32", }; -static struct bfin_spi3_chip spi_flash_chip_info = { +static struct adi_spi3_chip spi_flash_chip_info = { .enable_dma = true, /* use dma transfer with this chip*/ }; #endif #if IS_ENABLED(CONFIG_SPI_SPIDEV) -static struct bfin_spi3_chip spidev_chip_info = { +static struct adi_spi3_chip spidev_chip_info = { .enable_dma = true, }; #endif @@ -1736,7 +1736,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif }; -#if IS_ENABLED(CONFIG_SPI_BFIN_V3) +#if IS_ENABLED(CONFIG_SPI_ADI_V3) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { { @@ -1777,13 +1777,13 @@ static struct resource bfin_spi1_resource[] = { }; /* SPI controller data */ -static struct bfin_spi3_master bf60x_spi_master_info0 = { +static struct adi_spi3_master bf60x_spi_master_info0 = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; static struct platform_device bf60x_spi_master0 = { - .name = "bfin-spi3", + .name = "adi-spi3", .id = 0, /* Bus number */ .num_resources = ARRAY_SIZE(bfin_spi0_resource), .resource = bfin_spi0_resource, @@ -1792,13 +1792,13 @@ static struct platform_device bf60x_spi_master0 = { }, }; -static struct bfin_spi3_master bf60x_spi_master_info1 = { +static struct adi_spi3_master bf60x_spi_master_info1 = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, }; static struct platform_device bf60x_spi_master1 = { - .name = "bfin-spi3", + .name = "adi-spi3", .id = 1, /* Bus number */ .num_resources = ARRAY_SIZE(bfin_spi1_resource), .resource = bfin_spi1_resource, @@ -1990,7 +1990,7 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_sdh_device, #endif -#if IS_ENABLED(CONFIG_SPI_BFIN_V3) +#if IS_ENABLED(CONFIG_SPI_ADI_V3) &bf60x_spi_master0, &bf60x_spi_master1, #endif @@ -2051,8 +2051,8 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = { PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1", "pinctrl-adi2.0", NULL, "uart1"), PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0", "pinctrl-adi2.0", NULL, "rsi0"), PIN_MAP_MUX_GROUP_DEFAULT("stmmaceth.0", "pinctrl-adi2.0", NULL, "eth0"), - PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.0", "pinctrl-adi2.0", NULL, "spi0"), - PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.1", "pinctrl-adi2.0", NULL, "spi1"), + PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.0", "pinctrl-adi2.0", NULL, "spi0"), + PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.1", "pinctrl-adi2.0", NULL, "spi1"), PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0", "pinctrl-adi2.0", NULL, "twi0"), PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1", "pinctrl-adi2.0", NULL, "twi1"), PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"), diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 60f2b41c7310..a52e0edb7146 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -91,8 +91,8 @@ config SPI_BFIN5XX help This is the SPI controller master driver for Blackfin 5xx processor. -config SPI_BFIN_V3 - tristate "SPI controller v3 for Blackfin" +config SPI_ADI_V3 + tristate "SPI controller v3 for ADI" depends on BF60x help This is the SPI controller v3 master driver diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index bd792669e563..71e65dfc0ea3 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -18,7 +18,7 @@ obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o -obj-$(CONFIG_SPI_BFIN_V3) += spi-bfin-v3.o +obj-$(CONFIG_SPI_ADI_V3) += spi-adi-v3.o obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o diff --git a/drivers/spi/spi-bfin-v3.c b/drivers/spi/spi-adi-v3.c similarity index 61% rename from drivers/spi/spi-bfin-v3.c rename to drivers/spi/spi-adi-v3.c index 4089d0e0d84e..0c2914cfcdb5 100644 --- a/drivers/spi/spi-bfin-v3.c +++ b/drivers/spi/spi-adi-v3.c @@ -1,7 +1,7 @@ /* * Analog Devices SPI3 controller driver * - * Copyright (c) 2013 Analog Devices Inc. + * Copyright (c) 2014 Analog Devices Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -26,35 +26,34 @@ #include #include #include +#include #include -#include -#include #include #include -enum bfin_spi_state { +enum adi_spi_state { START_STATE, RUNNING_STATE, DONE_STATE, ERROR_STATE }; -struct bfin_spi_master; +struct adi_spi_master; -struct bfin_spi_transfer_ops { - void (*write) (struct bfin_spi_master *); - void (*read) (struct bfin_spi_master *); - void (*duplex) (struct bfin_spi_master *); +struct adi_spi_transfer_ops { + void (*write) (struct adi_spi_master *); + void (*read) (struct adi_spi_master *); + void (*duplex) (struct adi_spi_master *); }; /* runtime info for spi master */ -struct bfin_spi_master { +struct adi_spi_master { /* SPI framework hookup */ struct spi_master *master; /* Regs base of SPI controller */ - struct bfin_spi_regs __iomem *regs; + struct adi_spi_regs __iomem *regs; /* Pin request list */ u16 *pin_req; @@ -65,7 +64,7 @@ struct bfin_spi_master { /* Current message transfer state info */ struct spi_message *cur_msg; struct spi_transfer *cur_transfer; - struct bfin_spi_device *cur_chip; + struct adi_spi_device *cur_chip; unsigned transfer_len; /* transfer buffer */ @@ -90,12 +89,12 @@ struct bfin_spi_master { u32 ssel; unsigned long sclk; - enum bfin_spi_state state; + enum adi_spi_state state; - const struct bfin_spi_transfer_ops *ops; + const struct adi_spi_transfer_ops *ops; }; -struct bfin_spi_device { +struct adi_spi_device { u32 control; u32 clock; u32 ssel; @@ -105,17 +104,25 @@ struct bfin_spi_device { u32 cs_gpio; u32 tx_dummy_val; /* tx value for rx only transfer */ bool enable_dma; - const struct bfin_spi_transfer_ops *ops; + const struct adi_spi_transfer_ops *ops; }; -static void bfin_spi_enable(struct bfin_spi_master *drv_data) +static void adi_spi_enable(struct adi_spi_master *drv_data) { - bfin_write_or(&drv_data->regs->control, SPI_CTL_EN); + u32 ctl; + + ctl = ioread32(&drv_data->regs->control); + ctl |= SPI_CTL_EN; + iowrite32(ctl, &drv_data->regs->control); } -static void bfin_spi_disable(struct bfin_spi_master *drv_data) +static void adi_spi_disable(struct adi_spi_master *drv_data) { - bfin_write_and(&drv_data->regs->control, ~SPI_CTL_EN); + u32 ctl; + + ctl = ioread32(&drv_data->regs->control); + ctl &= ~SPI_CTL_EN; + iowrite32(ctl, &drv_data->regs->control); } /* Caculate the SPI_CLOCK register value based on input HZ */ @@ -128,35 +135,43 @@ static u32 hz_to_spi_clock(u32 sclk, u32 speed_hz) return spi_clock; } -static int bfin_spi_flush(struct bfin_spi_master *drv_data) +static int adi_spi_flush(struct adi_spi_master *drv_data) { unsigned long limit = loops_per_jiffy << 1; /* wait for stop and clear stat */ - while (!(bfin_read(&drv_data->regs->status) & SPI_STAT_SPIF) && --limit) + while (!(ioread32(&drv_data->regs->status) & SPI_STAT_SPIF) && --limit) cpu_relax(); - bfin_write(&drv_data->regs->status, 0xFFFFFFFF); + iowrite32(0xFFFFFFFF, &drv_data->regs->status); return limit; } /* Chip select operation functions for cs_change flag */ -static void bfin_spi_cs_active(struct bfin_spi_master *drv_data, struct bfin_spi_device *chip) +static void adi_spi_cs_active(struct adi_spi_master *drv_data, struct adi_spi_device *chip) { - if (likely(chip->cs < MAX_CTRL_CS)) - bfin_write_and(&drv_data->regs->ssel, ~chip->ssel); - else + if (likely(chip->cs < MAX_CTRL_CS)) { + u32 reg; + reg = ioread32(&drv_data->regs->ssel); + reg &= ~chip->ssel; + iowrite32(reg, &drv_data->regs->ssel); + } else { gpio_set_value(chip->cs_gpio, 0); + } } -static void bfin_spi_cs_deactive(struct bfin_spi_master *drv_data, - struct bfin_spi_device *chip) +static void adi_spi_cs_deactive(struct adi_spi_master *drv_data, + struct adi_spi_device *chip) { - if (likely(chip->cs < MAX_CTRL_CS)) - bfin_write_or(&drv_data->regs->ssel, chip->ssel); - else + if (likely(chip->cs < MAX_CTRL_CS)) { + u32 reg; + reg = ioread32(&drv_data->regs->ssel); + reg |= chip->ssel; + iowrite32(reg, &drv_data->regs->ssel); + } else { gpio_set_value(chip->cs_gpio, 1); + } /* Move delay here for consistency */ if (chip->cs_chg_udelay) @@ -164,187 +179,192 @@ static void bfin_spi_cs_deactive(struct bfin_spi_master *drv_data, } /* enable or disable the pin muxed by GPIO and SPI CS to work as SPI CS */ -static inline void bfin_spi_cs_enable(struct bfin_spi_master *drv_data, - struct bfin_spi_device *chip) +static inline void adi_spi_cs_enable(struct adi_spi_master *drv_data, + struct adi_spi_device *chip) { - if (chip->cs < MAX_CTRL_CS) - bfin_write_or(&drv_data->regs->ssel, chip->ssel >> 8); + if (chip->cs < MAX_CTRL_CS) { + u32 reg; + reg = ioread32(&drv_data->regs->ssel); + reg |= chip->ssel >> 8; + iowrite32(reg, &drv_data->regs->ssel); + } } -static inline void bfin_spi_cs_disable(struct bfin_spi_master *drv_data, - struct bfin_spi_device *chip) +static inline void adi_spi_cs_disable(struct adi_spi_master *drv_data, + struct adi_spi_device *chip) { - if (chip->cs < MAX_CTRL_CS) - bfin_write_and(&drv_data->regs->ssel, ~(chip->ssel >> 8)); + if (chip->cs < MAX_CTRL_CS) { + u32 reg; + reg = ioread32(&drv_data->regs->ssel); + reg &= ~(chip->ssel >> 8); + iowrite32(reg, &drv_data->regs->ssel); + } } /* stop controller and re-config current chip*/ -static void bfin_spi_restore_state(struct bfin_spi_master *drv_data) +static void adi_spi_restore_state(struct adi_spi_master *drv_data) { - struct bfin_spi_device *chip = drv_data->cur_chip; + struct adi_spi_device *chip = drv_data->cur_chip; /* Clear status and disable clock */ - bfin_write(&drv_data->regs->status, 0xFFFFFFFF); - bfin_write(&drv_data->regs->rx_control, 0x0); - bfin_write(&drv_data->regs->tx_control, 0x0); - bfin_spi_disable(drv_data); - - SSYNC(); + iowrite32(0xFFFFFFFF, &drv_data->regs->status); + iowrite32(0x0, &drv_data->regs->rx_control); + iowrite32(0x0, &drv_data->regs->tx_control); + adi_spi_disable(drv_data); /* Load the registers */ - bfin_write(&drv_data->regs->control, chip->control); - bfin_write(&drv_data->regs->clock, chip->clock); + iowrite32(chip->control, &drv_data->regs->control); + iowrite32(chip->clock, &drv_data->regs->clock); - bfin_spi_enable(drv_data); + adi_spi_enable(drv_data); drv_data->tx_num = drv_data->rx_num = 0; /* we always choose tx transfer initiate */ - bfin_write(&drv_data->regs->rx_control, SPI_RXCTL_REN); - bfin_write(&drv_data->regs->tx_control, - SPI_TXCTL_TEN | SPI_TXCTL_TTI); - bfin_spi_cs_active(drv_data, chip); + iowrite32(SPI_RXCTL_REN, &drv_data->regs->rx_control); + iowrite32(SPI_TXCTL_TEN | SPI_TXCTL_TTI, &drv_data->regs->tx_control); + adi_spi_cs_active(drv_data, chip); } /* discard invalid rx data and empty rfifo */ -static inline void dummy_read(struct bfin_spi_master *drv_data) +static inline void dummy_read(struct adi_spi_master *drv_data) { - while (!(bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)) - bfin_read(&drv_data->regs->rfifo); + while (!(ioread32(&drv_data->regs->status) & SPI_STAT_RFE)) + ioread32(&drv_data->regs->rfifo); } -static void bfin_spi_u8_write(struct bfin_spi_master *drv_data) +static void adi_spi_u8_write(struct adi_spi_master *drv_data) { dummy_read(drv_data); while (drv_data->tx < drv_data->tx_end) { - bfin_write(&drv_data->regs->tfifo, (*(u8 *)(drv_data->tx++))); - while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE) + iowrite32(*(u8 *)(drv_data->tx++), &drv_data->regs->tfifo); + while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE) cpu_relax(); - bfin_read(&drv_data->regs->rfifo); + ioread32(&drv_data->regs->rfifo); } } -static void bfin_spi_u8_read(struct bfin_spi_master *drv_data) +static void adi_spi_u8_read(struct adi_spi_master *drv_data) { u32 tx_val = drv_data->cur_chip->tx_dummy_val; dummy_read(drv_data); while (drv_data->rx < drv_data->rx_end) { - bfin_write(&drv_data->regs->tfifo, tx_val); - while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE) + iowrite32(tx_val, &drv_data->regs->tfifo); + while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE) cpu_relax(); - *(u8 *)(drv_data->rx++) = bfin_read(&drv_data->regs->rfifo); + *(u8 *)(drv_data->rx++) = ioread32(&drv_data->regs->rfifo); } } -static void bfin_spi_u8_duplex(struct bfin_spi_master *drv_data) +static void adi_spi_u8_duplex(struct adi_spi_master *drv_data) { dummy_read(drv_data); while (drv_data->rx < drv_data->rx_end) { - bfin_write(&drv_data->regs->tfifo, (*(u8 *)(drv_data->tx++))); - while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE) + iowrite32(*(u8 *)(drv_data->tx++), &drv_data->regs->tfifo); + while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE) cpu_relax(); - *(u8 *)(drv_data->rx++) = bfin_read(&drv_data->regs->rfifo); + *(u8 *)(drv_data->rx++) = ioread32(&drv_data->regs->rfifo); } } -static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u8 = { - .write = bfin_spi_u8_write, - .read = bfin_spi_u8_read, - .duplex = bfin_spi_u8_duplex, +static const struct adi_spi_transfer_ops adi_spi_transfer_ops_u8 = { + .write = adi_spi_u8_write, + .read = adi_spi_u8_read, + .duplex = adi_spi_u8_duplex, }; -static void bfin_spi_u16_write(struct bfin_spi_master *drv_data) +static void adi_spi_u16_write(struct adi_spi_master *drv_data) { dummy_read(drv_data); while (drv_data->tx < drv_data->tx_end) { - bfin_write(&drv_data->regs->tfifo, (*(u16 *)drv_data->tx)); + iowrite32(*(u16 *)drv_data->tx, &drv_data->regs->tfifo); drv_data->tx += 2; - while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE) + while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE) cpu_relax(); - bfin_read(&drv_data->regs->rfifo); + ioread32(&drv_data->regs->rfifo); } } -static void bfin_spi_u16_read(struct bfin_spi_master *drv_data) +static void adi_spi_u16_read(struct adi_spi_master *drv_data) { u32 tx_val = drv_data->cur_chip->tx_dummy_val; dummy_read(drv_data); while (drv_data->rx < drv_data->rx_end) { - bfin_write(&drv_data->regs->tfifo, tx_val); - while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE) + iowrite32(tx_val, &drv_data->regs->tfifo); + while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE) cpu_relax(); - *(u16 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo); + *(u16 *)drv_data->rx = ioread32(&drv_data->regs->rfifo); drv_data->rx += 2; } } -static void bfin_spi_u16_duplex(struct bfin_spi_master *drv_data) +static void adi_spi_u16_duplex(struct adi_spi_master *drv_data) { dummy_read(drv_data); while (drv_data->rx < drv_data->rx_end) { - bfin_write(&drv_data->regs->tfifo, (*(u16 *)drv_data->tx)); + iowrite32(*(u16 *)drv_data->tx, &drv_data->regs->tfifo); drv_data->tx += 2; - while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE) + while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE) cpu_relax(); - *(u16 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo); + *(u16 *)drv_data->rx = ioread32(&drv_data->regs->rfifo); drv_data->rx += 2; } } -static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u16 = { - .write = bfin_spi_u16_write, - .read = bfin_spi_u16_read, - .duplex = bfin_spi_u16_duplex, +static const struct adi_spi_transfer_ops adi_spi_transfer_ops_u16 = { + .write = adi_spi_u16_write, + .read = adi_spi_u16_read, + .duplex = adi_spi_u16_duplex, }; -static void bfin_spi_u32_write(struct bfin_spi_master *drv_data) +static void adi_spi_u32_write(struct adi_spi_master *drv_data) { dummy_read(drv_data); while (drv_data->tx < drv_data->tx_end) { - bfin_write(&drv_data->regs->tfifo, (*(u32 *)drv_data->tx)); + iowrite32(*(u32 *)drv_data->tx, &drv_data->regs->tfifo); drv_data->tx += 4; - while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE) + while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE) cpu_relax(); - bfin_read(&drv_data->regs->rfifo); + ioread32(&drv_data->regs->rfifo); } } -static void bfin_spi_u32_read(struct bfin_spi_master *drv_data) +static void adi_spi_u32_read(struct adi_spi_master *drv_data) { u32 tx_val = drv_data->cur_chip->tx_dummy_val; dummy_read(drv_data); while (drv_data->rx < drv_data->rx_end) { - bfin_write(&drv_data->regs->tfifo, tx_val); - while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE) + iowrite32(tx_val, &drv_data->regs->tfifo); + while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE) cpu_relax(); - *(u32 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo); + *(u32 *)drv_data->rx = ioread32(&drv_data->regs->rfifo); drv_data->rx += 4; } } -static void bfin_spi_u32_duplex(struct bfin_spi_master *drv_data) +static void adi_spi_u32_duplex(struct adi_spi_master *drv_data) { dummy_read(drv_data); while (drv_data->rx < drv_data->rx_end) { - bfin_write(&drv_data->regs->tfifo, (*(u32 *)drv_data->tx)); + iowrite32(*(u32 *)drv_data->tx, &drv_data->regs->tfifo); drv_data->tx += 4; - while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE) + while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE) cpu_relax(); - *(u32 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo); + *(u32 *)drv_data->rx = ioread32(&drv_data->regs->rfifo); drv_data->rx += 4; } } -static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u32 = { - .write = bfin_spi_u32_write, - .read = bfin_spi_u32_read, - .duplex = bfin_spi_u32_duplex, +static const struct adi_spi_transfer_ops adi_spi_transfer_ops_u32 = { + .write = adi_spi_u32_write, + .read = adi_spi_u32_read, + .duplex = adi_spi_u32_duplex, }; /* test if there is more transfer to be done */ -static void bfin_spi_next_transfer(struct bfin_spi_master *drv) +static void adi_spi_next_transfer(struct adi_spi_master *drv) { struct spi_message *msg = drv->cur_msg; struct spi_transfer *t = drv->cur_transfer; @@ -360,15 +380,15 @@ static void bfin_spi_next_transfer(struct bfin_spi_master *drv) } } -static void bfin_spi_giveback(struct bfin_spi_master *drv_data) +static void adi_spi_giveback(struct adi_spi_master *drv_data) { - struct bfin_spi_device *chip = drv_data->cur_chip; + struct adi_spi_device *chip = drv_data->cur_chip; - bfin_spi_cs_deactive(drv_data, chip); + adi_spi_cs_deactive(drv_data, chip); spi_finalize_current_message(drv_data->master); } -static int bfin_spi_setup_transfer(struct bfin_spi_master *drv) +static int adi_spi_setup_transfer(struct adi_spi_master *drv) { struct spi_transfer *t = drv->cur_transfer; u32 cr, cr_width; @@ -393,34 +413,33 @@ static int bfin_spi_setup_transfer(struct bfin_spi_master *drv) switch (t->bits_per_word) { case 8: cr_width = SPI_CTL_SIZE08; - drv->ops = &bfin_bfin_spi_transfer_ops_u8; + drv->ops = &adi_spi_transfer_ops_u8; break; case 16: cr_width = SPI_CTL_SIZE16; - drv->ops = &bfin_bfin_spi_transfer_ops_u16; + drv->ops = &adi_spi_transfer_ops_u16; break; case 32: cr_width = SPI_CTL_SIZE32; - drv->ops = &bfin_bfin_spi_transfer_ops_u32; + drv->ops = &adi_spi_transfer_ops_u32; break; default: return -EINVAL; } - cr = bfin_read(&drv->regs->control) & ~SPI_CTL_SIZE; + cr = ioread32(&drv->regs->control) & ~SPI_CTL_SIZE; cr |= cr_width; - bfin_write(&drv->regs->control, cr); + iowrite32(cr, &drv->regs->control); /* speed setup */ - bfin_write(&drv->regs->clock, - hz_to_spi_clock(drv->sclk, t->speed_hz)); + iowrite32(hz_to_spi_clock(drv->sclk, t->speed_hz), &drv->regs->clock); return 0; } -static int bfin_spi_dma_xfer(struct bfin_spi_master *drv_data) +static int adi_spi_dma_xfer(struct adi_spi_master *drv_data) { struct spi_transfer *t = drv_data->cur_transfer; struct spi_message *msg = drv_data->cur_msg; - struct bfin_spi_device *chip = drv_data->cur_chip; + struct adi_spi_device *chip = drv_data->cur_chip; u32 dma_config; unsigned long word_count, word_size; void *tx_buf, *rx_buf; @@ -498,17 +517,16 @@ static int bfin_spi_dma_xfer(struct bfin_spi_master *drv_data) set_dma_config(drv_data->rx_dma, dma_config | WNR); enable_dma(drv_data->tx_dma); enable_dma(drv_data->rx_dma); - SSYNC(); - bfin_write(&drv_data->regs->rx_control, SPI_RXCTL_REN | SPI_RXCTL_RDR_NE); - SSYNC(); - bfin_write(&drv_data->regs->tx_control, - SPI_TXCTL_TEN | SPI_TXCTL_TTI | SPI_TXCTL_TDR_NF); + iowrite32(SPI_RXCTL_REN | SPI_RXCTL_RDR_NE, + &drv_data->regs->rx_control); + iowrite32(SPI_TXCTL_TEN | SPI_TXCTL_TTI | SPI_TXCTL_TDR_NF, + &drv_data->regs->tx_control); return 0; } -static int bfin_spi_pio_xfer(struct bfin_spi_master *drv_data) +static int adi_spi_pio_xfer(struct adi_spi_master *drv_data) { struct spi_message *msg = drv_data->cur_msg; @@ -529,19 +547,19 @@ static int bfin_spi_pio_xfer(struct bfin_spi_master *drv_data) return -EIO; } - if (!bfin_spi_flush(drv_data)) + if (!adi_spi_flush(drv_data)) return -EIO; msg->actual_length += drv_data->transfer_len; tasklet_schedule(&drv_data->pump_transfers); return 0; } -static void bfin_spi_pump_transfers(unsigned long data) +static void adi_spi_pump_transfers(unsigned long data) { - struct bfin_spi_master *drv_data = (struct bfin_spi_master *)data; + struct adi_spi_master *drv_data = (struct adi_spi_master *)data; struct spi_message *msg = NULL; struct spi_transfer *t = NULL; - struct bfin_spi_device *chip = NULL; + struct adi_spi_device *chip = NULL; int ret; /* Get current state information */ @@ -552,7 +570,7 @@ static void bfin_spi_pump_transfers(unsigned long data) /* Handle for abort */ if (drv_data->state == ERROR_STATE) { msg->status = -EIO; - bfin_spi_giveback(drv_data); + adi_spi_giveback(drv_data); return; } @@ -560,14 +578,14 @@ static void bfin_spi_pump_transfers(unsigned long data) if (t->delay_usecs) udelay(t->delay_usecs); if (t->cs_change) - bfin_spi_cs_deactive(drv_data, chip); - bfin_spi_next_transfer(drv_data); + adi_spi_cs_deactive(drv_data, chip); + adi_spi_next_transfer(drv_data); t = drv_data->cur_transfer; } /* Handle end of message */ if (drv_data->state == DONE_STATE) { msg->status = 0; - bfin_spi_giveback(drv_data); + adi_spi_giveback(drv_data); return; } @@ -577,34 +595,34 @@ static void bfin_spi_pump_transfers(unsigned long data) return; } - ret = bfin_spi_setup_transfer(drv_data); + ret = adi_spi_setup_transfer(drv_data); if (ret) { msg->status = ret; - bfin_spi_giveback(drv_data); + adi_spi_giveback(drv_data); } - bfin_write(&drv_data->regs->status, 0xFFFFFFFF); - bfin_spi_cs_active(drv_data, chip); + iowrite32(0xFFFFFFFF, &drv_data->regs->status); + adi_spi_cs_active(drv_data, chip); drv_data->state = RUNNING_STATE; if (chip->enable_dma) - ret = bfin_spi_dma_xfer(drv_data); + ret = adi_spi_dma_xfer(drv_data); else - ret = bfin_spi_pio_xfer(drv_data); + ret = adi_spi_pio_xfer(drv_data); if (ret) { msg->status = ret; - bfin_spi_giveback(drv_data); + adi_spi_giveback(drv_data); } } -static int bfin_spi_transfer_one_message(struct spi_master *master, +static int adi_spi_transfer_one_message(struct spi_master *master, struct spi_message *m) { - struct bfin_spi_master *drv_data = spi_master_get_devdata(master); + struct adi_spi_master *drv_data = spi_master_get_devdata(master); drv_data->cur_msg = m; drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); - bfin_spi_restore_state(drv_data); + adi_spi_restore_state(drv_data); drv_data->state = START_STATE; drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, @@ -630,15 +648,15 @@ static const u16 ssel[][MAX_SPI_SSEL] = { P_SPI2_SSEL6, P_SPI2_SSEL7}, }; -static int bfin_spi_setup(struct spi_device *spi) +static int adi_spi_setup(struct spi_device *spi) { - struct bfin_spi_master *drv_data = spi_master_get_devdata(spi->master); - struct bfin_spi_device *chip = spi_get_ctldata(spi); - u32 bfin_ctl_reg = SPI_CTL_ODM | SPI_CTL_PSSE; + struct adi_spi_master *drv_data = spi_master_get_devdata(spi->master); + struct adi_spi_device *chip = spi_get_ctldata(spi); + u32 ctl_reg = SPI_CTL_ODM | SPI_CTL_PSSE; int ret = -EINVAL; if (!chip) { - struct bfin_spi3_chip *chip_info = spi->controller_data; + struct adi_spi3_chip *chip_info = spi->controller_data; chip = kzalloc(sizeof(*chip), GFP_KERNEL); if (!chip) { @@ -646,7 +664,7 @@ static int bfin_spi_setup(struct spi_device *spi) return -ENOMEM; } if (chip_info) { - if (chip_info->control & ~bfin_ctl_reg) { + if (chip_info->control & ~ctl_reg) { dev_err(&spi->dev, "do not set bits that the SPI framework manages\n"); goto error; @@ -657,6 +675,7 @@ static int bfin_spi_setup(struct spi_device *spi) chip->enable_dma = chip_info->enable_dma; } chip->cs = spi->chip_select; + if (chip->cs < MAX_CTRL_CS) { chip->ssel = (1 << chip->cs) << 8; ret = peripheral_request(ssel[spi->master->bus_num] @@ -678,7 +697,7 @@ static int bfin_spi_setup(struct spi_device *spi) } /* force a default base state */ - chip->control &= bfin_ctl_reg; + chip->control &= ctl_reg; if (spi->mode & SPI_CPOL) chip->control |= SPI_CTL_CPOL; @@ -692,8 +711,8 @@ static int bfin_spi_setup(struct spi_device *spi) chip->clock = hz_to_spi_clock(drv_data->sclk, spi->max_speed_hz); - bfin_spi_cs_enable(drv_data, chip); - bfin_spi_cs_deactive(drv_data, chip); + adi_spi_cs_enable(drv_data, chip); + adi_spi_cs_deactive(drv_data, chip); return 0; error: @@ -705,10 +724,10 @@ static int bfin_spi_setup(struct spi_device *spi) return ret; } -static void bfin_spi_cleanup(struct spi_device *spi) +static void adi_spi_cleanup(struct spi_device *spi) { - struct bfin_spi_device *chip = spi_get_ctldata(spi); - struct bfin_spi_master *drv_data = spi_master_get_devdata(spi->master); + struct adi_spi_device *chip = spi_get_ctldata(spi); + struct adi_spi_master *drv_data = spi_master_get_devdata(spi->master); if (!chip) return; @@ -716,7 +735,7 @@ static void bfin_spi_cleanup(struct spi_device *spi) if (chip->cs < MAX_CTRL_CS) { peripheral_free(ssel[spi->master->bus_num] [chip->cs-1]); - bfin_spi_cs_disable(drv_data, chip); + adi_spi_cs_disable(drv_data, chip); } else { gpio_free(chip->cs_gpio); } @@ -725,10 +744,11 @@ static void bfin_spi_cleanup(struct spi_device *spi) spi_set_ctldata(spi, NULL); } -static irqreturn_t bfin_spi_tx_dma_isr(int irq, void *dev_id) +static irqreturn_t adi_spi_tx_dma_isr(int irq, void *dev_id) { - struct bfin_spi_master *drv_data = dev_id; + struct adi_spi_master *drv_data = dev_id; u32 dma_stat = get_dma_curr_irqstat(drv_data->tx_dma); + u32 tx_ctl; clear_dma_irqstat(drv_data->tx_dma); if (dma_stat & DMA_DONE) { @@ -739,13 +759,15 @@ static irqreturn_t bfin_spi_tx_dma_isr(int irq, void *dev_id) if (drv_data->tx) drv_data->state = ERROR_STATE; } - bfin_write_and(&drv_data->regs->tx_control, ~SPI_TXCTL_TDR_NF); + tx_ctl = ioread32(&drv_data->regs->tx_control); + tx_ctl &= ~SPI_TXCTL_TDR_NF; + iowrite32(tx_ctl, &drv_data->regs->tx_control); return IRQ_HANDLED; } -static irqreturn_t bfin_spi_rx_dma_isr(int irq, void *dev_id) +static irqreturn_t adi_spi_rx_dma_isr(int irq, void *dev_id) { - struct bfin_spi_master *drv_data = dev_id; + struct adi_spi_master *drv_data = dev_id; struct spi_message *msg = drv_data->cur_msg; u32 dma_stat = get_dma_curr_irqstat(drv_data->rx_dma); @@ -760,8 +782,8 @@ static irqreturn_t bfin_spi_rx_dma_isr(int irq, void *dev_id) dev_err(&drv_data->master->dev, "spi rx dma error: %d\n", dma_stat); } - bfin_write(&drv_data->regs->tx_control, 0); - bfin_write(&drv_data->regs->rx_control, 0); + iowrite32(0, &drv_data->regs->tx_control); + iowrite32(0, &drv_data->regs->rx_control); if (drv_data->rx_num != drv_data->tx_num) dev_dbg(&drv_data->master->dev, "dma interrupt missing: tx=%d,rx=%d\n", @@ -770,12 +792,12 @@ static irqreturn_t bfin_spi_rx_dma_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static int bfin_spi_probe(struct platform_device *pdev) +static int adi_spi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct bfin_spi3_master *info = dev_get_platdata(dev); + struct adi_spi3_master *info = dev_get_platdata(dev); struct spi_master *master; - struct bfin_spi_master *drv_data; + struct adi_spi_master *drv_data; struct resource *mem, *res; unsigned int tx_dma, rx_dma; unsigned long sclk; @@ -819,9 +841,9 @@ static int bfin_spi_probe(struct platform_device *pdev) master->bus_num = pdev->id; master->num_chipselect = info->num_chipselect; - master->cleanup = bfin_spi_cleanup; - master->setup = bfin_spi_setup; - master->transfer_one_message = bfin_spi_transfer_one_message; + master->cleanup = adi_spi_cleanup; + master->setup = adi_spi_setup; + master->transfer_one_message = adi_spi_transfer_one_message; master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) | SPI_BPW_MASK(8); @@ -845,28 +867,28 @@ static int bfin_spi_probe(struct platform_device *pdev) dev_err(dev, "can not request SPI TX DMA channel\n"); goto err_put_master; } - set_dma_callback(tx_dma, bfin_spi_tx_dma_isr, drv_data); + set_dma_callback(tx_dma, adi_spi_tx_dma_isr, drv_data); ret = request_dma(rx_dma, "SPI_RX_DMA"); if (ret) { dev_err(dev, "can not request SPI RX DMA channel\n"); goto err_free_tx_dma; } - set_dma_callback(drv_data->rx_dma, bfin_spi_rx_dma_isr, drv_data); + set_dma_callback(drv_data->rx_dma, adi_spi_rx_dma_isr, drv_data); /* request CLK, MOSI and MISO */ - ret = peripheral_request_list(drv_data->pin_req, "bfin-spi3"); + ret = peripheral_request_list(drv_data->pin_req, "adi-spi3"); if (ret < 0) { dev_err(dev, "can not request spi pins\n"); goto err_free_rx_dma; } - bfin_write(&drv_data->regs->control, SPI_CTL_MSTR | SPI_CTL_CPHA); - bfin_write(&drv_data->regs->ssel, 0x0000FE00); - bfin_write(&drv_data->regs->delay, 0x0); + iowrite32(SPI_CTL_MSTR | SPI_CTL_CPHA, &drv_data->regs->control); + iowrite32(0x0000FE00, &drv_data->regs->ssel); + iowrite32(0x0, &drv_data->regs->delay); tasklet_init(&drv_data->pump_transfers, - bfin_spi_pump_transfers, (unsigned long)drv_data); + adi_spi_pump_transfers, (unsigned long)drv_data); /* register with the SPI framework */ ret = devm_spi_register_master(dev, master); if (ret) { @@ -888,43 +910,41 @@ static int bfin_spi_probe(struct platform_device *pdev) return ret; } -static int bfin_spi_remove(struct platform_device *pdev) +static int adi_spi_remove(struct platform_device *pdev) { struct spi_master *master = platform_get_drvdata(pdev); - struct bfin_spi_master *drv_data = spi_master_get_devdata(master); - - bfin_spi_disable(drv_data); + struct adi_spi_master *drv_data = spi_master_get_devdata(master); + adi_spi_disable(drv_data); peripheral_free_list(drv_data->pin_req); free_dma(drv_data->rx_dma); free_dma(drv_data->tx_dma); - return 0; } #ifdef CONFIG_PM -static int bfin_spi_suspend(struct device *dev) +static int adi_spi_suspend(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); - struct bfin_spi_master *drv_data = spi_master_get_devdata(master); + struct adi_spi_master *drv_data = spi_master_get_devdata(master); spi_master_suspend(master); - drv_data->control = bfin_read(&drv_data->regs->control); - drv_data->ssel = bfin_read(&drv_data->regs->ssel); + drv_data->control = ioread32(&drv_data->regs->control); + drv_data->ssel = ioread32(&drv_data->regs->ssel); - bfin_write(&drv_data->regs->control, SPI_CTL_MSTR | SPI_CTL_CPHA); - bfin_write(&drv_data->regs->ssel, 0x0000FE00); + iowrite32(SPI_CTL_MSTR | SPI_CTL_CPHA, &drv_data->regs->control); + iowrite32(0x0000FE00, &drv_data->regs->ssel); dma_disable_irq(drv_data->rx_dma); dma_disable_irq(drv_data->tx_dma); return 0; } -static int bfin_spi_resume(struct device *dev) +static int adi_spi_resume(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); - struct bfin_spi_master *drv_data = spi_master_get_devdata(master); + struct adi_spi_master *drv_data = spi_master_get_devdata(master); int ret = 0; /* bootrom may modify spi and dma status when resume in spi boot mode */ @@ -932,8 +952,8 @@ static int bfin_spi_resume(struct device *dev) dma_enable_irq(drv_data->rx_dma); dma_enable_irq(drv_data->tx_dma); - bfin_write(&drv_data->regs->control, drv_data->control); - bfin_write(&drv_data->regs->ssel, drv_data->ssel); + iowrite32(drv_data->control, &drv_data->regs->control); + iowrite32(drv_data->ssel, &drv_data->regs->ssel); ret = spi_master_resume(master); if (ret) { @@ -944,21 +964,21 @@ static int bfin_spi_resume(struct device *dev) return ret; } #endif -static const struct dev_pm_ops bfin_spi_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(bfin_spi_suspend, bfin_spi_resume) +static const struct dev_pm_ops adi_spi_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(adi_spi_suspend, adi_spi_resume) }; -MODULE_ALIAS("platform:bfin-spi3"); -static struct platform_driver bfin_spi_driver = { +MODULE_ALIAS("platform:adi-spi3"); +static struct platform_driver adi_spi_driver = { .driver = { - .name = "bfin-spi3", + .name = "adi-spi3", .owner = THIS_MODULE, - .pm = &bfin_spi_pm_ops, + .pm = &adi_spi_pm_ops, }, - .remove = bfin_spi_remove, + .remove = adi_spi_remove, }; -module_platform_driver_probe(bfin_spi_driver, bfin_spi_probe); +module_platform_driver_probe(adi_spi_driver, adi_spi_probe); MODULE_DESCRIPTION("Analog Devices SPI3 controller driver"); MODULE_AUTHOR("Scott Jiang "); diff --git a/arch/blackfin/include/asm/bfin_spi3.h b/include/linux/spi/adi_spi3.h similarity index 97% rename from arch/blackfin/include/asm/bfin_spi3.h rename to include/linux/spi/adi_spi3.h index 0957e65a54be..c84123aa1d06 100644 --- a/arch/blackfin/include/asm/bfin_spi3.h +++ b/include/linux/spi/adi_spi3.h @@ -1,7 +1,7 @@ /* * Analog Devices SPI3 controller driver * - * Copyright (c) 2011 Analog Devices Inc. + * Copyright (c) 2014 Analog Devices Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,14 +11,10 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef _SPI_CHANNEL_H_ -#define _SPI_CHANNEL_H_ +#ifndef _ADI_SPI3_H_ +#define _ADI_SPI3_H_ #include @@ -209,9 +205,9 @@ #define SPI_ILAT_CLR_TFI 0x00000800 /* Transmit Finish Indication */ /* - * bfin spi3 registers layout + * adi spi3 registers layout */ -struct bfin_spi_regs { +struct adi_spi_regs { u32 revid; u32 control; u32 rx_control; @@ -240,7 +236,7 @@ struct bfin_spi_regs { #define MAX_CTRL_CS 8 /* cs in spi controller */ /* device.platform_data for SSP controller devices */ -struct bfin_spi3_master { +struct adi_spi3_master { u16 num_chipselect; u16 pin_req[7]; }; @@ -248,11 +244,11 @@ struct bfin_spi3_master { /* spi_board_info.controller_data for SPI slave devices, * copied to spi_device.platform_data ... mostly for dma tuning */ -struct bfin_spi3_chip { +struct adi_spi3_chip { u32 control; u16 cs_chg_udelay; /* Some devices require 16-bit delays */ u32 tx_dummy_val; /* tx value for rx only transfer */ bool enable_dma; }; -#endif /* _SPI_CHANNEL_H_ */ +#endif /* _ADI_SPI3_H_ */ From c34cc2487d5e6c225609696db3f49d40259787e2 Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Sat, 5 Apr 2014 11:29:09 +0800 Subject: [PATCH 3/7] spi: spi-adi-v3: convert to use common clk framework Use common clk api to get spi clock. Signed-off-by: Scott Jiang Signed-off-by: Mark Brown --- arch/blackfin/mach-bf609/clock.c | 7 +++++++ drivers/spi/spi-adi-v3.c | 13 +++++++------ 2 files changed, 14 insertions(+), 6 deletions(-) diff --git a/arch/blackfin/mach-bf609/clock.c b/arch/blackfin/mach-bf609/clock.c index 56200f37cfc8..244fa4ab4c56 100644 --- a/arch/blackfin/mach-bf609/clock.c +++ b/arch/blackfin/mach-bf609/clock.c @@ -363,6 +363,12 @@ static struct clk ethclk = { .ops = &dummy_clk_ops, }; +static struct clk spiclk = { + .name = "spi", + .parent = &sclk1, + .ops = &dummy_clk_ops, +}; + static struct clk_lookup bf609_clks[] = { CLK(sys_clkin, NULL, "SYS_CLKIN"), CLK(pll_clk, NULL, "PLLCLK"), @@ -375,6 +381,7 @@ static struct clk_lookup bf609_clks[] = { CLK(dclk, NULL, "DCLK"), CLK(oclk, NULL, "OCLK"), CLK(ethclk, NULL, "stmmaceth"), + CLK(spiclk, NULL, "spi"), }; int __init clk_init(void) diff --git a/drivers/spi/spi-adi-v3.c b/drivers/spi/spi-adi-v3.c index 0c2914cfcdb5..dcb2287c7f8a 100644 --- a/drivers/spi/spi-adi-v3.c +++ b/drivers/spi/spi-adi-v3.c @@ -13,6 +13,7 @@ * GNU General Public License for more details. */ +#include #include #include #include @@ -800,7 +801,7 @@ static int adi_spi_probe(struct platform_device *pdev) struct adi_spi_master *drv_data; struct resource *mem, *res; unsigned int tx_dma, rx_dma; - unsigned long sclk; + struct clk *sclk; int ret; if (!info) { @@ -808,10 +809,10 @@ static int adi_spi_probe(struct platform_device *pdev) return -ENODEV; } - sclk = get_sclk1(); - if (!sclk) { - dev_err(dev, "can not get sclk1\n"); - return -ENXIO; + sclk = devm_clk_get(dev, "spi"); + if (IS_ERR(sclk)) { + dev_err(dev, "can not get spi clock\n"); + return PTR_ERR(sclk); } res = platform_get_resource(pdev, IORESOURCE_DMA, 0); @@ -852,7 +853,7 @@ static int adi_spi_probe(struct platform_device *pdev) drv_data->tx_dma = tx_dma; drv_data->rx_dma = rx_dma; drv_data->pin_req = info->pin_req; - drv_data->sclk = sclk; + drv_data->sclk = clk_get_rate(sclk); mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); drv_data->regs = devm_ioremap_resource(dev, mem); From c474b38665463d9017cd60cd3a8f8226cf8d562f Mon Sep 17 00:00:00 2001 From: Harini Katakam Date: Mon, 14 Apr 2014 14:36:53 +0530 Subject: [PATCH 4/7] spi: Add driver for Cadence SPI controller Add driver for Cadence SPI controller. This is used in Xilinx Zynq. Signed-off-by: Harini Katakam Signed-off-by: Mark Brown --- drivers/spi/Kconfig | 7 + drivers/spi/Makefile | 1 + drivers/spi/spi-cadence.c | 673 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 681 insertions(+) create mode 100644 drivers/spi/spi-cadence.c diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 60f2b41c7310..5f11568660c6 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -148,6 +148,13 @@ config SPI_BUTTERFLY inexpensive battery powered microcontroller evaluation board. This same cable can be used to flash new firmware. +config SPI_CADENCE + tristate "Cadence SPI controller" + depends on SPI_MASTER + help + This selects the Cadence SPI controller master driver + used by Xilinx Zynq. + config SPI_CLPS711X tristate "CLPS711X host SPI controller" depends on ARCH_CLPS711X || COMPILE_TEST diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index bd792669e563..3e503d6d3df3 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_SPI_BFIN_V3) += spi-bfin-v3.o obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o +obj-$(CONFIG_SPI_CADENCE) += spi-cadence.o obj-$(CONFIG_SPI_CLPS711X) += spi-clps711x.o obj-$(CONFIG_SPI_COLDFIRE_QSPI) += spi-coldfire-qspi.o obj-$(CONFIG_SPI_DAVINCI) += spi-davinci.o diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c new file mode 100644 index 000000000000..bb758978465d --- /dev/null +++ b/drivers/spi/spi-cadence.c @@ -0,0 +1,673 @@ +/* + * Cadence SPI controller driver (master mode only) + * + * Copyright (C) 2008 - 2014 Xilinx, Inc. + * + * based on Blackfin On-Chip SPI Driver (spi_bfin5xx.c) + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Name of this driver */ +#define CDNS_SPI_NAME "cdns-spi" + +/* Register offset definitions */ +#define CDNS_SPI_CR_OFFSET 0x00 /* Configuration Register, RW */ +#define CDNS_SPI_ISR_OFFSET 0x04 /* Interrupt Status Register, RO */ +#define CDNS_SPI_IER_OFFSET 0x08 /* Interrupt Enable Register, WO */ +#define CDNS_SPI_IDR_OFFSET 0x0c /* Interrupt Disable Register, WO */ +#define CDNS_SPI_IMR_OFFSET 0x10 /* Interrupt Enabled Mask Register, RO */ +#define CDNS_SPI_ER_OFFSET 0x14 /* Enable/Disable Register, RW */ +#define CDNS_SPI_DR_OFFSET 0x18 /* Delay Register, RW */ +#define CDNS_SPI_TXD_OFFSET 0x1C /* Data Transmit Register, WO */ +#define CDNS_SPI_RXD_OFFSET 0x20 /* Data Receive Register, RO */ +#define CDNS_SPI_SICR_OFFSET 0x24 /* Slave Idle Count Register, RW */ +#define CDNS_SPI_THLD_OFFSET 0x28 /* Transmit FIFO Watermark Register,RW */ + +/* + * SPI Configuration Register bit Masks + * + * This register contains various control bits that affect the operation + * of the SPI controller + */ +#define CDNS_SPI_CR_MANSTRT_MASK 0x00010000 /* Manual TX Start */ +#define CDNS_SPI_CR_CPHA_MASK 0x00000004 /* Clock Phase Control */ +#define CDNS_SPI_CR_CPOL_MASK 0x00000002 /* Clock Polarity Control */ +#define CDNS_SPI_CR_SSCTRL_MASK 0x00003C00 /* Slave Select Mask */ +#define CDNS_SPI_CR_BAUD_DIV_MASK 0x00000038 /* Baud Rate Divisor Mask */ +#define CDNS_SPI_CR_MSTREN_MASK 0x00000001 /* Master Enable Mask */ +#define CDNS_SPI_CR_MANSTRTEN_MASK 0x00008000 /* Manual TX Enable Mask */ +#define CDNS_SPI_CR_SSFORCE_MASK 0x00004000 /* Manual SS Enable Mask */ +#define CDNS_SPI_CR_BAUD_DIV_4_MASK 0x00000008 /* Default Baud Div Mask */ +#define CDNS_SPI_CR_DEFAULT_MASK (CDNS_SPI_CR_MSTREN_MASK | \ + CDNS_SPI_CR_SSCTRL_MASK | \ + CDNS_SPI_CR_SSFORCE_MASK | \ + CDNS_SPI_CR_BAUD_DIV_4_MASK) + +/* + * SPI Configuration Register - Baud rate and slave select + * + * These are the values used in the calculation of baud rate divisor and + * setting the slave select. + */ + +#define CDNS_SPI_BAUD_DIV_MAX 7 /* Baud rate divisor maximum */ +#define CDNS_SPI_BAUD_DIV_MIN 1 /* Baud rate divisor minimum */ +#define CDNS_SPI_BAUD_DIV_SHIFT 3 /* Baud rate divisor shift in CR */ +#define CDNS_SPI_SS_SHIFT 10 /* Slave Select field shift in CR */ +#define CDNS_SPI_SS0 0x1 /* Slave Select zero */ + +/* + * SPI Interrupt Registers bit Masks + * + * All the four interrupt registers (Status/Mask/Enable/Disable) have the same + * bit definitions. + */ +#define CDNS_SPI_IXR_TXOW_MASK 0x00000004 /* SPI TX FIFO Overwater */ +#define CDNS_SPI_IXR_MODF_MASK 0x00000002 /* SPI Mode Fault */ +#define CDNS_SPI_IXR_RXNEMTY_MASK 0x00000010 /* SPI RX FIFO Not Empty */ +#define CDNS_SPI_IXR_DEFAULT_MASK (CDNS_SPI_IXR_TXOW_MASK | \ + CDNS_SPI_IXR_MODF_MASK) +#define CDNS_SPI_IXR_TXFULL_MASK 0x00000008 /* SPI TX Full */ +#define CDNS_SPI_IXR_ALL_MASK 0x0000007F /* SPI all interrupts */ + +/* + * SPI Enable Register bit Masks + * + * This register is used to enable or disable the SPI controller + */ +#define CDNS_SPI_ER_ENABLE_MASK 0x00000001 /* SPI Enable Bit Mask */ +#define CDNS_SPI_ER_DISABLE_MASK 0x0 /* SPI Disable Bit Mask */ + +/* SPI FIFO depth in bytes */ +#define CDNS_SPI_FIFO_DEPTH 128 + +/* Default number of chip select lines */ +#define CDNS_SPI_DEFAULT_NUM_CS 4 + +/** + * struct cdns_spi - This definition defines spi driver instance + * @regs: Virtual address of the SPI controller registers + * @ref_clk: Pointer to the peripheral clock + * @pclk: Pointer to the APB clock + * @speed_hz: Current SPI bus clock speed in Hz + * @txbuf: Pointer to the TX buffer + * @rxbuf: Pointer to the RX buffer + * @tx_bytes: Number of bytes left to transfer + * @rx_bytes: Number of bytes requested + * @dev_busy: Device busy flag + * @is_decoded_cs: Flag for decoder property set or not + */ +struct cdns_spi { + void __iomem *regs; + struct clk *ref_clk; + struct clk *pclk; + u32 speed_hz; + const u8 *txbuf; + u8 *rxbuf; + int tx_bytes; + int rx_bytes; + u8 dev_busy; + u32 is_decoded_cs; +}; + +/* Macros for the SPI controller read/write */ +static inline u32 cdns_spi_read(struct cdns_spi *xspi, u32 offset) +{ + return readl_relaxed(xspi->regs + offset); +} + +static inline void cdns_spi_write(struct cdns_spi *xspi, u32 offset, u32 val) +{ + writel_relaxed(val, xspi->regs + offset); +} + +/** + * cdns_spi_init_hw - Initialize the hardware and configure the SPI controller + * @xspi: Pointer to the cdns_spi structure + * + * On reset the SPI controller is configured to be in master mode, baud rate + * divisor is set to 4, threshold value for TX FIFO not full interrupt is set + * to 1 and size of the word to be transferred as 8 bit. + * This function initializes the SPI controller to disable and clear all the + * interrupts, enable manual slave select and manual start, deselect all the + * chip select lines, and enable the SPI controller. + */ +static void cdns_spi_init_hw(struct cdns_spi *xspi) +{ + cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET, + CDNS_SPI_ER_DISABLE_MASK); + cdns_spi_write(xspi, CDNS_SPI_IDR_OFFSET, + CDNS_SPI_IXR_ALL_MASK); + + /* Clear the RX FIFO */ + while (cdns_spi_read(xspi, CDNS_SPI_ISR_OFFSET) & + CDNS_SPI_IXR_RXNEMTY_MASK) + cdns_spi_read(xspi, CDNS_SPI_RXD_OFFSET); + + cdns_spi_write(xspi, CDNS_SPI_ISR_OFFSET, + CDNS_SPI_IXR_ALL_MASK); + cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, + CDNS_SPI_CR_DEFAULT_MASK); + cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET, + CDNS_SPI_ER_ENABLE_MASK); +} + +/** + * cdns_spi_chipselect - Select or deselect the chip select line + * @spi: Pointer to the spi_device structure + * @is_on: Select(0) or deselect (1) the chip select line + */ +static void cdns_spi_chipselect(struct spi_device *spi, bool is_high) +{ + struct cdns_spi *xspi = spi_master_get_devdata(spi->master); + u32 ctrl_reg; + + ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR_OFFSET); + + if (is_high) { + /* Deselect the slave */ + ctrl_reg |= CDNS_SPI_CR_SSCTRL_MASK; + } else { + /* Select the slave */ + ctrl_reg &= ~CDNS_SPI_CR_SSCTRL_MASK; + if (!(xspi->is_decoded_cs)) + ctrl_reg |= ((~(CDNS_SPI_SS0 << spi->chip_select)) << + CDNS_SPI_SS_SHIFT) & + CDNS_SPI_CR_SSCTRL_MASK; + else + ctrl_reg |= (spi->chip_select << CDNS_SPI_SS_SHIFT) & + CDNS_SPI_CR_SSCTRL_MASK; + } + + cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, ctrl_reg); +} + +/** + * cdns_spi_config_clock_mode - Sets clock polarity and phase + * @spi: Pointer to the spi_device structure + * + * Sets the requested clock polarity and phase. + */ +static void cdns_spi_config_clock_mode(struct spi_device *spi) +{ + struct cdns_spi *xspi = spi_master_get_devdata(spi->master); + u32 ctrl_reg; + + ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR_OFFSET); + + /* Set the SPI clock phase and clock polarity */ + ctrl_reg &= ~(CDNS_SPI_CR_CPHA_MASK | CDNS_SPI_CR_CPOL_MASK); + if (spi->mode & SPI_CPHA) + ctrl_reg |= CDNS_SPI_CR_CPHA_MASK; + if (spi->mode & SPI_CPOL) + ctrl_reg |= CDNS_SPI_CR_CPOL_MASK; + + cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, ctrl_reg); +} + +/** + * cdns_spi_config_clock_freq - Sets clock frequency + * @spi: Pointer to the spi_device structure + * @transfer: Pointer to the spi_transfer structure which provides + * information about next transfer setup parameters + * + * Sets the requested clock frequency. + * Note: If the requested frequency is not an exact match with what can be + * obtained using the prescalar value the driver sets the clock frequency which + * is lower than the requested frequency (maximum lower) for the transfer. If + * the requested frequency is higher or lower than that is supported by the SPI + * controller the driver will set the highest or lowest frequency supported by + * controller. + */ +static void cdns_spi_config_clock_freq(struct spi_device *spi, + struct spi_transfer *transfer) +{ + struct cdns_spi *xspi = spi_master_get_devdata(spi->master); + u32 ctrl_reg, baud_rate_val; + unsigned long frequency; + + frequency = clk_get_rate(xspi->ref_clk); + + ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR_OFFSET); + + /* Set the clock frequency */ + if (xspi->speed_hz != transfer->speed_hz) { + /* first valid value is 1 */ + baud_rate_val = CDNS_SPI_BAUD_DIV_MIN; + while ((baud_rate_val < CDNS_SPI_BAUD_DIV_MAX) && + (frequency / (2 << baud_rate_val)) > transfer->speed_hz) + baud_rate_val++; + + ctrl_reg &= ~CDNS_SPI_CR_BAUD_DIV_MASK; + ctrl_reg |= baud_rate_val << CDNS_SPI_BAUD_DIV_SHIFT; + + xspi->speed_hz = frequency / (2 << baud_rate_val); + } + cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, ctrl_reg); +} + +/** + * cdns_spi_setup_transfer - Configure SPI controller for specified transfer + * @spi: Pointer to the spi_device structure + * @transfer: Pointer to the spi_transfer structure which provides + * information about next transfer setup parameters + * + * Sets the operational mode of SPI controller for the next SPI transfer and + * sets the requested clock frequency. + * + * Return: Always 0 + */ +static int cdns_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *transfer) +{ + struct cdns_spi *xspi = spi_master_get_devdata(spi->master); + + cdns_spi_config_clock_freq(spi, transfer); + + dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u clock speed\n", + __func__, spi->mode, spi->bits_per_word, + xspi->speed_hz); + + return 0; +} + +/** + * cdns_spi_fill_tx_fifo - Fills the TX FIFO with as many bytes as possible + * @xspi: Pointer to the cdns_spi structure + */ +static void cdns_spi_fill_tx_fifo(struct cdns_spi *xspi) +{ + unsigned long trans_cnt = 0; + + while ((trans_cnt < CDNS_SPI_FIFO_DEPTH) && + (xspi->tx_bytes > 0)) { + if (xspi->txbuf) + cdns_spi_write(xspi, CDNS_SPI_TXD_OFFSET, + *xspi->txbuf++); + else + cdns_spi_write(xspi, CDNS_SPI_TXD_OFFSET, 0); + + xspi->tx_bytes--; + trans_cnt++; + } +} + +/** + * cdns_spi_irq - Interrupt service routine of the SPI controller + * @irq: IRQ number + * @dev_id: Pointer to the xspi structure + * + * This function handles TX empty and Mode Fault interrupts only. + * On TX empty interrupt this function reads the received data from RX FIFO and + * fills the TX FIFO if there is any data remaining to be transferred. + * On Mode Fault interrupt this function indicates that transfer is completed, + * the SPI subsystem will identify the error as the remaining bytes to be + * transferred is non-zero. + * + * Return: IRQ_HANDLED when handled; IRQ_NONE otherwise. + */ +static irqreturn_t cdns_spi_irq(int irq, void *dev_id) +{ + struct spi_master *master = dev_id; + struct cdns_spi *xspi = spi_master_get_devdata(master); + u32 intr_status, status; + + status = IRQ_NONE; + intr_status = cdns_spi_read(xspi, CDNS_SPI_ISR_OFFSET); + cdns_spi_write(xspi, CDNS_SPI_ISR_OFFSET, intr_status); + + if (intr_status & CDNS_SPI_IXR_MODF_MASK) { + /* Indicate that transfer is completed, the SPI subsystem will + * identify the error as the remaining bytes to be + * transferred is non-zero + */ + cdns_spi_write(xspi, CDNS_SPI_IDR_OFFSET, + CDNS_SPI_IXR_DEFAULT_MASK); + spi_finalize_current_transfer(master); + status = IRQ_HANDLED; + } else if (intr_status & CDNS_SPI_IXR_TXOW_MASK) { + unsigned long trans_cnt; + + trans_cnt = xspi->rx_bytes - xspi->tx_bytes; + + /* Read out the data from the RX FIFO */ + while (trans_cnt) { + u8 data; + + data = cdns_spi_read(xspi, CDNS_SPI_RXD_OFFSET); + if (xspi->rxbuf) + *xspi->rxbuf++ = data; + + xspi->rx_bytes--; + trans_cnt--; + } + + if (xspi->tx_bytes) { + /* There is more data to send */ + cdns_spi_fill_tx_fifo(xspi); + } else { + /* Transfer is completed */ + cdns_spi_write(xspi, CDNS_SPI_IDR_OFFSET, + CDNS_SPI_IXR_DEFAULT_MASK); + spi_finalize_current_transfer(master); + } + status = IRQ_HANDLED; + } + + return status; +} + +/** + * cdns_transfer_one - Initiates the SPI transfer + * @master: Pointer to spi_master structure + * @spi: Pointer to the spi_device structure + * @transfer: Pointer to the spi_transfer structure which provides + * information about next transfer parameters + * + * This function fills the TX FIFO, starts the SPI transfer and + * returns a positive transfer count so that core will wait for completion. + * + * Return: Number of bytes transferred in the last transfer + */ +static int cdns_transfer_one(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *transfer) +{ + struct cdns_spi *xspi = spi_master_get_devdata(master); + + xspi->txbuf = transfer->tx_buf; + xspi->rxbuf = transfer->rx_buf; + xspi->tx_bytes = transfer->len; + xspi->rx_bytes = transfer->len; + + cdns_spi_setup_transfer(spi, transfer); + + cdns_spi_fill_tx_fifo(xspi); + + cdns_spi_write(xspi, CDNS_SPI_IER_OFFSET, + CDNS_SPI_IXR_DEFAULT_MASK); + return transfer->len; +} + +/** + * cdns_prepare_transfer_hardware - Prepares hardware for transfer. + * @master: Pointer to the spi_master structure which provides + * information about the controller. + * + * This function enables SPI master controller. + * + * Return: 0 always + */ +static int cdns_prepare_transfer_hardware(struct spi_master *master) +{ + struct cdns_spi *xspi = spi_master_get_devdata(master); + + cdns_spi_config_clock_mode(master->cur_msg->spi); + + cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET, + CDNS_SPI_ER_ENABLE_MASK); + + return 0; +} + +/** + * cdns_unprepare_transfer_hardware - Relaxes hardware after transfer + * @master: Pointer to the spi_master structure which provides + * information about the controller. + * + * This function disables the SPI master controller. + * + * Return: 0 always + */ +static int cdns_unprepare_transfer_hardware(struct spi_master *master) +{ + struct cdns_spi *xspi = spi_master_get_devdata(master); + + cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET, + CDNS_SPI_ER_DISABLE_MASK); + + return 0; +} + +/** + * cdns_spi_probe - Probe method for the SPI driver + * @pdev: Pointer to the platform_device structure + * + * This function initializes the driver data structures and the hardware. + * + * Return: 0 on success and error value on error + */ +static int cdns_spi_probe(struct platform_device *pdev) +{ + int ret = 0, irq; + struct spi_master *master; + struct cdns_spi *xspi; + struct resource *res; + u32 num_cs; + + master = spi_alloc_master(&pdev->dev, sizeof(*xspi)); + if (master == NULL) + return -ENOMEM; + + xspi = spi_master_get_devdata(master); + master->dev.of_node = pdev->dev.of_node; + platform_set_drvdata(pdev, master); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + xspi->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(xspi->regs)) { + ret = PTR_ERR(xspi->regs); + goto remove_master; + } + + xspi->pclk = devm_clk_get(&pdev->dev, "pclk"); + if (IS_ERR(xspi->pclk)) { + dev_err(&pdev->dev, "pclk clock not found.\n"); + ret = PTR_ERR(xspi->pclk); + goto remove_master; + } + + xspi->ref_clk = devm_clk_get(&pdev->dev, "ref_clk"); + if (IS_ERR(xspi->ref_clk)) { + dev_err(&pdev->dev, "ref_clk clock not found.\n"); + ret = PTR_ERR(xspi->ref_clk); + goto remove_master; + } + + ret = clk_prepare_enable(xspi->pclk); + if (ret) { + dev_err(&pdev->dev, "Unable to enable APB clock.\n"); + goto remove_master; + } + + ret = clk_prepare_enable(xspi->ref_clk); + if (ret) { + dev_err(&pdev->dev, "Unable to enable device clock.\n"); + goto clk_dis_apb; + } + + /* SPI controller initializations */ + cdns_spi_init_hw(xspi); + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + ret = -ENXIO; + dev_err(&pdev->dev, "irq number is invalid\n"); + goto remove_master; + } + + ret = devm_request_irq(&pdev->dev, irq, cdns_spi_irq, + 0, pdev->name, master); + if (ret != 0) { + ret = -ENXIO; + dev_err(&pdev->dev, "request_irq failed\n"); + goto remove_master; + } + + ret = of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs); + + if (ret < 0) + master->num_chipselect = CDNS_SPI_DEFAULT_NUM_CS; + else + master->num_chipselect = num_cs; + + ret = of_property_read_u32(pdev->dev.of_node, "is-decoded-cs", + &xspi->is_decoded_cs); + + if (ret < 0) + xspi->is_decoded_cs = 0; + + master->prepare_transfer_hardware = cdns_prepare_transfer_hardware; + master->transfer_one = cdns_transfer_one; + master->unprepare_transfer_hardware = cdns_unprepare_transfer_hardware; + master->set_cs = cdns_spi_chipselect; + master->mode_bits = SPI_CPOL | SPI_CPHA; + + /* Set to default valid value */ + master->max_speed_hz = clk_get_rate(xspi->ref_clk) / 4; + xspi->speed_hz = master->max_speed_hz; + + master->bits_per_word_mask = SPI_BPW_MASK(8); + + ret = spi_register_master(master); + if (ret) { + dev_err(&pdev->dev, "spi_register_master failed\n"); + goto clk_dis_all; + } + + return ret; + +clk_dis_all: + clk_disable_unprepare(xspi->ref_clk); +clk_dis_apb: + clk_disable_unprepare(xspi->pclk); +remove_master: + spi_master_put(master); + return ret; +} + +/** + * cdns_spi_remove - Remove method for the SPI driver + * @pdev: Pointer to the platform_device structure + * + * This function is called if a device is physically removed from the system or + * if the driver module is being unloaded. It frees all resources allocated to + * the device. + * + * Return: 0 on success and error value on error + */ +static int cdns_spi_remove(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct cdns_spi *xspi = spi_master_get_devdata(master); + + cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET, + CDNS_SPI_ER_DISABLE_MASK); + + clk_disable_unprepare(xspi->ref_clk); + clk_disable_unprepare(xspi->pclk); + + spi_unregister_master(master); + + return 0; +} + +/** + * cdns_spi_suspend - Suspend method for the SPI driver + * @dev: Address of the platform_device structure + * + * This function disables the SPI controller and + * changes the driver state to "suspend" + * + * Return: Always 0 + */ +static int __maybe_unused cdns_spi_suspend(struct device *dev) +{ + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct spi_master *master = platform_get_drvdata(pdev); + struct cdns_spi *xspi = spi_master_get_devdata(master); + + spi_master_suspend(master); + + clk_disable_unprepare(xspi->ref_clk); + + clk_disable_unprepare(xspi->pclk); + + return 0; +} + +/** + * cdns_spi_resume - Resume method for the SPI driver + * @dev: Address of the platform_device structure + * + * This function changes the driver state to "ready" + * + * Return: 0 on success and error value on error + */ +static int __maybe_unused cdns_spi_resume(struct device *dev) +{ + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct spi_master *master = platform_get_drvdata(pdev); + struct cdns_spi *xspi = spi_master_get_devdata(master); + int ret = 0; + + ret = clk_prepare_enable(xspi->pclk); + if (ret) { + dev_err(dev, "Cannot enable APB clock.\n"); + return ret; + } + + ret = clk_prepare_enable(xspi->ref_clk); + if (ret) { + dev_err(dev, "Cannot enable device clock.\n"); + clk_disable(xspi->pclk); + return ret; + } + spi_master_resume(master); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(cdns_spi_dev_pm_ops, cdns_spi_suspend, + cdns_spi_resume); + +static struct of_device_id cdns_spi_of_match[] = { + { .compatible = "xlnx,zynq-spi-r1p6" }, + { .compatible = "cdns,spi-r1p6" }, + { /* end of table */ } +}; +MODULE_DEVICE_TABLE(of, cdns_spi_of_match); + +/* cdns_spi_driver - This structure defines the SPI subsystem platform driver */ +static struct platform_driver cdns_spi_driver = { + .probe = cdns_spi_probe, + .remove = cdns_spi_remove, + .driver = { + .name = CDNS_SPI_NAME, + .owner = THIS_MODULE, + .of_match_table = cdns_spi_of_match, + .pm = &cdns_spi_dev_pm_ops, + }, +}; + +module_platform_driver(cdns_spi_driver); + +MODULE_AUTHOR("Xilinx, Inc."); +MODULE_DESCRIPTION("Cadence SPI driver"); +MODULE_LICENSE("GPL"); From 205d52756f4091ffcf526f9d14853b18e3ca8d6f Mon Sep 17 00:00:00 2001 From: Harini Katakam Date: Mon, 14 Apr 2014 14:36:54 +0530 Subject: [PATCH 5/7] spi: Add devicetree bindings documentation for Cadence SPI Add spi-cadence bindings documentation. Signed-off-by: Harini Katakam Signed-off-by: Mark Brown --- .../devicetree/bindings/spi/spi-cadence.txt | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/spi-cadence.txt diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.txt b/Documentation/devicetree/bindings/spi/spi-cadence.txt new file mode 100644 index 000000000000..94f09141a4f0 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-cadence.txt @@ -0,0 +1,31 @@ +Cadence SPI controller Device Tree Bindings +------------------------------------------- + +Required properties: +- compatible : Should be "cdns,spi-r1p6" or "xlnx,zynq-spi-r1p6". +- reg : Physical base address and size of SPI registers map. +- interrupts : Property with a value describing the interrupt + number. +- interrupt-parent : Must be core interrupt controller +- clock-names : List of input clock names - "ref_clk", "pclk" + (See clock bindings for details). +- clocks : Clock phandles (see clock bindings for details). + +Optional properties: +- num-cs : Number of chip selects used. + If a decoder is used, this will be the number of + chip selects after the decoder. +- is-decoded-cs : Flag to indicate whether decoder is used or not. + +Example: + + spi@e0007000 { + compatible = "xlnx,zynq-spi-r1p6"; + clock-names = "ref_clk", "pclk"; + clocks = <&clkc 26>, <&clkc 35>; + interrupt-parent = <&intc>; + interrupts = <0 49 4>; + num-cs = <4>; + is-decoded-cs = <0>; + reg = <0xe0007000 0x1000>; + } ; From 25dbe04a24516cdfd6bd215c1caaf28916b91a82 Mon Sep 17 00:00:00 2001 From: Harini Katakam Date: Tue, 15 Apr 2014 16:42:09 +0530 Subject: [PATCH 6/7] spi: cadence: Add dependency on ARM Add dependency on ARM in Kconfig. This is to fix the build error related to _relaxed IO. Remove dependency on SPI_MASTER because this is already defined under if SPI_MASTER in Kconfig. Signed-off-by: Harini Katakam Signed-off-by: Mark Brown --- drivers/spi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 5f11568660c6..32b1d0f1416c 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -150,7 +150,7 @@ config SPI_BUTTERFLY config SPI_CADENCE tristate "Cadence SPI controller" - depends on SPI_MASTER + depends on ARM help This selects the Cadence SPI controller master driver used by Xilinx Zynq. From b112f0585edd1c10e4986373d93ab0d95d12da82 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 6 May 2014 17:44:41 +0200 Subject: [PATCH 7/7] spi: atmel: fix incorrect comparison Found using smatch: drivers/spi/spi-atmel.c:878 atmel_spi_pump_pio_data() warn: unsigned 'as->current_remaining_bytes' is never less than zero. Signed-off-by: Alexandre Belloni Acked-by: Nicolas Ferre Signed-off-by: Mark Brown --- drivers/spi/spi-atmel.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 485e6cce94bf..e6fe837d49fb 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -874,8 +874,9 @@ atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer) spi_readl(as, RDR); } if (xfer->bits_per_word > 8) { - as->current_remaining_bytes -= 2; - if (as->current_remaining_bytes < 0) + if (as->current_remaining_bytes > 2) + as->current_remaining_bytes -= 2; + else as->current_remaining_bytes = 0; } else { as->current_remaining_bytes--;