Merge branches 'acpi-soc', 'acpi-bus', 'acpi-pmic' and 'acpi-power'

* acpi-soc:
  ACPI / LPSS: Call pwm_add_table() for Bay Trail PWM device
  i2c: designware: Add ACPI HID for Hisilicon Hip07/08 I2C controller
  ACPI / APD: Add clock frequency for Hisilicon Hip07/08 I2C controller

* acpi-bus:
  ACPI / bus: Add INT0002 to list of always-present devices
  ACPI / bus: Introduce a list of ids for "always present" devices

* acpi-pmic:
  ACPI / PMIC: xpower: Fix power_table addresses

* acpi-power:
  ACPI / power: Delay turning off unused power resources after suspend

drivers/acpi/Makefile

@@ -50,6 +50,7 @@ acpi-$(CONFIG_ACPI_REDUCED_HARDWARE_ONLY) += evged.o
 acpi-y				+= sysfs.o
 acpi-y				+= property.o
 acpi-$(CONFIG_X86)		+= acpi_cmos_rtc.o
+acpi-$(CONFIG_X86)		+= x86/utils.o
 acpi-$(CONFIG_DEBUG_FS)		+= debugfs.o
 acpi-$(CONFIG_ACPI_NUMA)	+= numa.o
 acpi-$(CONFIG_ACPI_PROCFS_POWER) += cm_sbs.o

drivers/acpi/acpi_apd.c

@@ -106,6 +106,16 @@ static const struct apd_device_desc vulcan_spi_desc = {
 	.setup = acpi_apd_setup,
 	.fixed_clk_rate = 133000000,
 };
+
+static const struct apd_device_desc hip07_i2c_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 200000000,
+};
+
+static const struct apd_device_desc hip08_i2c_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 250000000,
+};
 #endif
 
 #else
@@ -169,6 +179,8 @@ static const struct acpi_device_id acpi_apd_device_ids[] = {
 #ifdef CONFIG_ARM64
 	{ "APMC0D0F", APD_ADDR(xgene_i2c_desc) },
 	{ "BRCM900D", APD_ADDR(vulcan_spi_desc) },
+	{ "HISI0A21", APD_ADDR(hip07_i2c_desc) },
+	{ "HISI0A22", APD_ADDR(hip08_i2c_desc) },
 #endif
 	{ }
 };

drivers/acpi/acpi_lpss.c

@@ -143,6 +143,22 @@ static void lpss_deassert_reset(struct lpss_private_data *pdata)
 	writel(val, pdata->mmio_base + offset);
 }
 
+/*
+ * BYT PWM used for backlight control by the i915 driver on systems without
+ * the Crystal Cove PMIC.
+ */
+static struct pwm_lookup byt_pwm_lookup[] = {
+	PWM_LOOKUP_WITH_MODULE("80860F09:00", 0, "0000:00:02.0",
+			       "pwm_backlight", 0, PWM_POLARITY_NORMAL,
+			       "pwm-lpss-platform"),
+};
+
+static void byt_pwm_setup(struct lpss_private_data *pdata)
+{
+	if (!acpi_dev_present("INT33FD", NULL, -1))
+		pwm_add_table(byt_pwm_lookup, ARRAY_SIZE(byt_pwm_lookup));
+}
+
 #define LPSS_I2C_ENABLE			0x6c
 
 static void byt_i2c_setup(struct lpss_private_data *pdata)
@@ -200,6 +216,7 @@ static const struct lpss_device_desc lpt_sdio_dev_desc = {
 
 static const struct lpss_device_desc byt_pwm_dev_desc = {
 	.flags = LPSS_SAVE_CTX,
+	.setup = byt_pwm_setup,
 };
 
 static const struct lpss_device_desc bsw_pwm_dev_desc = {

drivers/acpi/bus.c

@@ -114,6 +114,11 @@ int acpi_bus_get_status(struct acpi_device *device)
 	acpi_status status;
 	unsigned long long sta;
 
+	if (acpi_device_always_present(device)) {
+		acpi_set_device_status(device, ACPI_STA_DEFAULT);
+		return 0;
+	}
+
 	status = acpi_bus_get_status_handle(device->handle, &sta);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;

drivers/acpi/pmic/intel_pmic_xpower.c

@@ -27,97 +27,97 @@ static struct pmic_table power_table[] = {
 		.address = 0x00,
 		.reg = 0x13,
 		.bit = 0x05,
-	},
+	}, /* ALD1 */
 	{
 		.address = 0x04,
 		.reg = 0x13,
 		.bit = 0x06,
-	},
+	}, /* ALD2 */
 	{
 		.address = 0x08,
 		.reg = 0x13,
 		.bit = 0x07,
-	},
+	}, /* ALD3 */
 	{
 		.address = 0x0c,
 		.reg = 0x12,
 		.bit = 0x03,
-	},
+	}, /* DLD1 */
 	{
 		.address = 0x10,
 		.reg = 0x12,
 		.bit = 0x04,
-	},
+	}, /* DLD2 */
 	{
 		.address = 0x14,
 		.reg = 0x12,
 		.bit = 0x05,
-	},
+	}, /* DLD3 */
 	{
 		.address = 0x18,
 		.reg = 0x12,
 		.bit = 0x06,
-	},
+	}, /* DLD4 */
 	{
 		.address = 0x1c,
 		.reg = 0x12,
 		.bit = 0x00,
-	},
+	}, /* ELD1 */
 	{
 		.address = 0x20,
 		.reg = 0x12,
 		.bit = 0x01,
-	},
+	}, /* ELD2 */
 	{
 		.address = 0x24,
 		.reg = 0x12,
 		.bit = 0x02,
-	},
+	}, /* ELD3 */
 	{
 		.address = 0x28,
 		.reg = 0x13,
 		.bit = 0x02,
-	},
+	}, /* FLD1 */
 	{
 		.address = 0x2c,
 		.reg = 0x13,
 		.bit = 0x03,
-	},
+	}, /* FLD2 */
 	{
 		.address = 0x30,
 		.reg = 0x13,
 		.bit = 0x04,
-	},
+	}, /* FLD3 */
+	{
+		.address = 0x34,
+		.reg = 0x10,
+		.bit = 0x03,
+	}, /* BUC1 */
 	{
 		.address = 0x38,
 		.reg = 0x10,
-		.bit = 0x03,
+		.bit = 0x06,
-	},
+	}, /* BUC2 */
 	{
 		.address = 0x3c,
 		.reg = 0x10,
-		.bit = 0x06,
+		.bit = 0x05,
-	},
+	}, /* BUC3 */
 	{
 		.address = 0x40,
 		.reg = 0x10,
-		.bit = 0x05,
+		.bit = 0x04,
-	},
+	}, /* BUC4 */
 	{
 		.address = 0x44,
 		.reg = 0x10,
-		.bit = 0x04,
+		.bit = 0x01,
-	},
+	}, /* BUC5 */
 	{
 		.address = 0x48,
 		.reg = 0x10,
-		.bit = 0x01,
-	},
-	{
-		.address = 0x4c,
-		.reg = 0x10,
 		.bit = 0x00
-	},
+	}, /* BUC6 */
 };
 
 /* TMP0 - TMP5 are the same, all from GPADC */

drivers/acpi/power.c

@@ -864,6 +864,16 @@ void acpi_resume_power_resources(void)
 
 		mutex_unlock(&resource->resource_lock);
 	}
+
+	mutex_unlock(&power_resource_list_lock);
+}
+
+void acpi_turn_off_unused_power_resources(void)
+{
+	struct acpi_power_resource *resource;
+
+	mutex_lock(&power_resource_list_lock);
+
 	list_for_each_entry_reverse(resource, &acpi_power_resource_list, list_node) {
 		int result, state;
 

drivers/acpi/sleep.c

@@ -474,6 +474,7 @@ static void acpi_pm_start(u32 acpi_state)
  */
 static void acpi_pm_end(void)
 {
+	acpi_turn_off_unused_power_resources();
 	acpi_scan_lock_release();
 	/*
 	 * This is necessary in case acpi_pm_finish() is not called during a

drivers/acpi/sleep.h

@@ -6,6 +6,7 @@ extern struct list_head acpi_wakeup_device_list;
 extern struct mutex acpi_device_lock;
 
 extern void acpi_resume_power_resources(void);
+extern void acpi_turn_off_unused_power_resources(void);
 
 static inline acpi_status acpi_set_waking_vector(u32 wakeup_address)
 {

drivers/acpi/x86/utils.c

@@ -0,0 +1,90 @@
+/*
+ * X86 ACPI Utility Functions
+ *
+ * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on various non upstream patches to support the CHT Whiskey Cove PMIC:
+ * Copyright (C) 2013-2015 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+#include "../internal.h"
+
+/*
+ * Some ACPI devices are hidden (status == 0x0) in recent BIOS-es because
+ * some recent Windows drivers bind to one device but poke at multiple
+ * devices at the same time, so the others get hidden.
+ * We work around this by always reporting ACPI_STA_DEFAULT for these
+ * devices. Note this MUST only be done for devices where this is safe.
+ *
+ * This forcing of devices to be present is limited to specific CPU (SoC)
+ * models both to avoid potentially causing trouble on other models and
+ * because some HIDs are re-used on different SoCs for completely
+ * different devices.
+ */
+struct always_present_id {
+	struct acpi_device_id hid[2];
+	struct x86_cpu_id cpu_ids[2];
+	const char *uid;
+};
+
+#define ICPU(model)	{ X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, }
+
+#define ENTRY(hid, uid, cpu_models) {					\
+	{ { hid, }, {} },						\
+	{ cpu_models, {} },						\
+	uid,								\
+}
+
+static const struct always_present_id always_present_ids[] = {
+	/*
+	 * Bay / Cherry Trail PWM directly poked by GPU driver in win10,
+	 * but Linux uses a separate PWM driver, harmless if not used.
+	 */
+	ENTRY("80860F09", "1", ICPU(INTEL_FAM6_ATOM_SILVERMONT1)),
+	ENTRY("80862288", "1", ICPU(INTEL_FAM6_ATOM_AIRMONT)),
+	/*
+	 * The INT0002 device is necessary to clear wakeup interrupt sources
+	 * on Cherry Trail devices, without it we get nobody cared IRQ msgs.
+	 */
+	ENTRY("INT0002", "1", ICPU(INTEL_FAM6_ATOM_AIRMONT)),
+};
+
+bool acpi_device_always_present(struct acpi_device *adev)
+{
+	u32 *status = (u32 *)&adev->status;
+	u32 old_status = *status;
+	bool ret = false;
+	unsigned int i;
+
+	/* acpi_match_device_ids checks status, so set it to default */
+	*status = ACPI_STA_DEFAULT;
+	for (i = 0; i < ARRAY_SIZE(always_present_ids); i++) {
+		if (acpi_match_device_ids(adev, always_present_ids[i].hid))
+			continue;
+
+		if (!adev->pnp.unique_id ||
+		    strcmp(adev->pnp.unique_id, always_present_ids[i].uid))
+			continue;
+
+		if (!x86_match_cpu(always_present_ids[i].cpu_ids))
+			continue;
+
+		if (old_status != ACPI_STA_DEFAULT) /* Log only once */
+			dev_info(&adev->dev,
+				 "Device [%s] is in always present list\n",
+				 adev->pnp.bus_id);
+
+		ret = true;
+		break;
+	}
+	*status = old_status;
+
+	return ret;
+}

drivers/i2c/busses/i2c-designware-platdrv.c

@@ -129,6 +129,8 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
 	{ "AMDI0010", ACCESS_INTR_MASK },
 	{ "AMDI0510", 0 },
 	{ "APMC0D0F", 0 },
+	{ "HISI02A1", 0 },
+	{ "HISI02A2", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);

include/acpi/acpi_bus.h

@@ -587,6 +587,15 @@ struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle);
 int acpi_enable_wakeup_device_power(struct acpi_device *dev, int state);
 int acpi_disable_wakeup_device_power(struct acpi_device *dev);
 
+#ifdef CONFIG_X86
+bool acpi_device_always_present(struct acpi_device *adev);
+#else
+static inline bool acpi_device_always_present(struct acpi_device *adev)
+{
+	return false;
+}
+#endif
+
 #ifdef CONFIG_PM
 acpi_status acpi_add_pm_notifier(struct acpi_device *adev, struct device *dev,
 				 void (*work_func)(struct work_struct *work));