mirror of https://gitee.com/openkylin/linux.git
[media] rcar_vin: add devicetree support
Add support for devicetree probe for the rcar-vin driver. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> [g.liakhovetski@gmx.de fix a typo, sort headers alphabetically] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This commit is contained in:
parent
e9a1d94fa8
commit
47c71bd61b
|
@ -0,0 +1,86 @@
|
|||
Renesas RCar Video Input driver (rcar_vin)
|
||||
------------------------------------------
|
||||
|
||||
The rcar_vin device provides video input capabilities for the Renesas R-Car
|
||||
family of devices. The current blocks are always slaves and suppot one input
|
||||
channel which can be either RGB, YUYV or BT656.
|
||||
|
||||
- compatible: Must be one of the following
|
||||
- "renesas,vin-r8a7791" for the R8A7791 device
|
||||
- "renesas,vin-r8a7790" for the R8A7790 device
|
||||
- "renesas,vin-r8a7779" for the R8A7779 device
|
||||
- "renesas,vin-r8a7778" for the R8A7778 device
|
||||
- reg: the register base and size for the device registers
|
||||
- interrupts: the interrupt for the device
|
||||
- clocks: Reference to the parent clock
|
||||
|
||||
Additionally, an alias named vinX will need to be created to specify
|
||||
which video input device this is.
|
||||
|
||||
The per-board settings:
|
||||
- port sub-node describing a single endpoint connected to the vin
|
||||
as described in video-interfaces.txt[1]. Only the first one will
|
||||
be considered as each vin interface has one input port.
|
||||
|
||||
These settings are used to work out video input format and widths
|
||||
into the system.
|
||||
|
||||
|
||||
Device node example
|
||||
-------------------
|
||||
|
||||
aliases {
|
||||
vin0 = &vin0;
|
||||
};
|
||||
|
||||
vin0: vin@0xe6ef0000 {
|
||||
compatible = "renesas,vin-r8a7790";
|
||||
clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
|
||||
reg = <0 0xe6ef0000 0 0x1000>;
|
||||
interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
Board setup example (vin1 composite video input)
|
||||
------------------------------------------------
|
||||
|
||||
&i2c2 {
|
||||
status = "ok";
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
adv7180@20 {
|
||||
compatible = "adi,adv7180";
|
||||
reg = <0x20>;
|
||||
remote = <&vin1>;
|
||||
|
||||
port {
|
||||
adv7180: endpoint {
|
||||
bus-width = <8>;
|
||||
remote-endpoint = <&vin1ep0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* composite video input */
|
||||
&vin1 {
|
||||
pinctrl-0 = <&vin1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "ok";
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
vin1ep0: endpoint {
|
||||
remote-endpoint = <&adv7180>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
|
||||
[1] video-interfaces.txt common video media interface
|
|
@ -19,6 +19,8 @@
|
|||
#include <linux/io.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/platform_data/camera-rcar.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
|
@ -31,6 +33,7 @@
|
|||
#include <media/v4l2-dev.h>
|
||||
#include <media/v4l2-device.h>
|
||||
#include <media/v4l2-mediabus.h>
|
||||
#include <media/v4l2-of.h>
|
||||
#include <media/v4l2-subdev.h>
|
||||
#include <media/videobuf2-dma-contig.h>
|
||||
|
||||
|
@ -1390,6 +1393,17 @@ static struct soc_camera_host_ops rcar_vin_host_ops = {
|
|||
.init_videobuf2 = rcar_vin_init_videobuf2,
|
||||
};
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static struct of_device_id rcar_vin_of_table[] = {
|
||||
{ .compatible = "renesas,vin-r8a7791", .data = (void *)RCAR_GEN2 },
|
||||
{ .compatible = "renesas,vin-r8a7790", .data = (void *)RCAR_GEN2 },
|
||||
{ .compatible = "renesas,vin-r8a7779", .data = (void *)RCAR_H1 },
|
||||
{ .compatible = "renesas,vin-r8a7778", .data = (void *)RCAR_M1 },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, rcar_vin_of_table);
|
||||
#endif
|
||||
|
||||
static struct platform_device_id rcar_vin_id_table[] = {
|
||||
{ "r8a7791-vin", RCAR_GEN2 },
|
||||
{ "r8a7790-vin", RCAR_GEN2 },
|
||||
|
@ -1402,15 +1416,52 @@ MODULE_DEVICE_TABLE(platform, rcar_vin_id_table);
|
|||
|
||||
static int rcar_vin_probe(struct platform_device *pdev)
|
||||
{
|
||||
const struct of_device_id *match = NULL;
|
||||
struct rcar_vin_priv *priv;
|
||||
struct resource *mem;
|
||||
struct rcar_vin_platform_data *pdata;
|
||||
unsigned int pdata_flags;
|
||||
int irq, ret;
|
||||
|
||||
pdata = pdev->dev.platform_data;
|
||||
if (!pdata || !pdata->flags) {
|
||||
dev_err(&pdev->dev, "platform data not set\n");
|
||||
return -EINVAL;
|
||||
if (pdev->dev.of_node) {
|
||||
struct v4l2_of_endpoint ep;
|
||||
struct device_node *np;
|
||||
|
||||
match = of_match_device(of_match_ptr(rcar_vin_of_table),
|
||||
&pdev->dev);
|
||||
|
||||
np = of_graph_get_next_endpoint(pdev->dev.of_node, NULL);
|
||||
if (!np) {
|
||||
dev_err(&pdev->dev, "could not find endpoint\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ret = v4l2_of_parse_endpoint(np, &ep);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "could not parse endpoint\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (ep.bus_type == V4L2_MBUS_BT656)
|
||||
pdata_flags = RCAR_VIN_BT656;
|
||||
else {
|
||||
pdata_flags = 0;
|
||||
if (ep.bus.parallel.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
|
||||
pdata_flags |= RCAR_VIN_HSYNC_ACTIVE_LOW;
|
||||
if (ep.bus.parallel.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
|
||||
pdata_flags |= RCAR_VIN_VSYNC_ACTIVE_LOW;
|
||||
}
|
||||
|
||||
of_node_put(np);
|
||||
|
||||
dev_dbg(&pdev->dev, "pdata_flags = %08x\n", pdata_flags);
|
||||
} else {
|
||||
pdata = pdev->dev.platform_data;
|
||||
if (!pdata || !pdata->flags) {
|
||||
dev_err(&pdev->dev, "platform data not set\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
pdata_flags = pdata->flags;
|
||||
}
|
||||
|
||||
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
|
@ -1441,12 +1492,18 @@ static int rcar_vin_probe(struct platform_device *pdev)
|
|||
|
||||
priv->ici.priv = priv;
|
||||
priv->ici.v4l2_dev.dev = &pdev->dev;
|
||||
priv->ici.nr = pdev->id;
|
||||
priv->ici.drv_name = dev_name(&pdev->dev);
|
||||
priv->ici.ops = &rcar_vin_host_ops;
|
||||
|
||||
priv->pdata_flags = pdata->flags;
|
||||
priv->chip = pdev->id_entry->driver_data;
|
||||
priv->pdata_flags = pdata_flags;
|
||||
if (!match) {
|
||||
priv->ici.nr = pdev->id;
|
||||
priv->chip = pdev->id_entry->driver_data;
|
||||
} else {
|
||||
priv->ici.nr = of_alias_get_id(pdev->dev.of_node, "vin");
|
||||
priv->chip = (enum chip_id)match->data;
|
||||
};
|
||||
|
||||
spin_lock_init(&priv->lock);
|
||||
INIT_LIST_HEAD(&priv->capture);
|
||||
|
||||
|
@ -1487,6 +1544,7 @@ static struct platform_driver rcar_vin_driver = {
|
|||
.driver = {
|
||||
.name = DRV_NAME,
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = of_match_ptr(rcar_vin_of_table),
|
||||
},
|
||||
.id_table = rcar_vin_id_table,
|
||||
};
|
||||
|
|
Loading…
Reference in New Issue