ARM: tegra: Enable DSI support on Dalmore

Dalmore has a 10.1" WUXGA panel connected to one of the DSI outputs of
the Tegra114.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
This commit is contained in:
Thierry Reding 2013-12-19 16:59:32 +01:00 committed by Stephen Warren
parent 032f11f3ac
commit 48b901171c
1 changed files with 32 additions and 12 deletions

View File

@ -16,6 +16,21 @@ memory {
reg = <0x80000000 0x40000000>;
};
host1x@50000000 {
dsi@54300000 {
status = "okay";
panel@0 {
compatible = "panasonic,vvx10f004b00",
"simple-panel";
reg = <0>;
power-supply = <&avdd_lcd_reg>;
backlight = <&backlight>;
};
};
};
pinmux@70000868 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@ -723,6 +738,10 @@ serial@70006300 {
status = "okay";
};
pwm@7000a000 {
status = "okay";
};
i2c@7000c000 {
status = "okay";
clock-frequency = <100000>;
@ -811,7 +830,7 @@ tps65090_dcdc3_reg: dcdc3 {
regulator-boot-on;
};
fet1 {
vdd_bl_reg: fet1 {
regulator-name = "vdd-lcd-bl";
};
@ -819,7 +838,7 @@ fet3 {
regulator-name = "vdd-modem-3v3";
};
fet4 {
avdd_lcd_reg: fet4 {
regulator-name = "avdd-lcd";
};
@ -1089,6 +1108,17 @@ usb-phy@7d008000 {
vbus-supply = <&usb3_vbus_reg>;
};
backlight: backlight {
compatible = "pwm-backlight";
enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
power-supply = <&vdd_bl_reg>;
pwms = <&pwm 1 1000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
@ -1155,16 +1185,6 @@ dvdd_ts_reg: regulator@1 {
gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
};
lcd_bl_en_reg: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "lcd_bl_en";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
};
usb1_vbus_reg: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;