From 490b63e6de63d13e82110f4cb5f1aa31dd27245a Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 25 Jan 2017 14:32:43 -0800 Subject: [PATCH] usb: chipidea: Configure phy for appropriate mode When the qcom chipidea controller is used with an extcon, we need to signal device mode or host mode to the phy so it can configure itself for the correct mode. This should be done after the phy is powered up, so that the register writes work correctly. Add in the appropriate phy_set_mode() call here. Cc: Peter Chen Cc: Greg Kroah-Hartman Signed-off-by: Stephen Boyd Signed-off-by: Peter Chen --- drivers/usb/chipidea/core.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index bcb3a9c360d4..79ad8e91632e 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -427,13 +427,21 @@ void ci_platform_configure(struct ci_hdrc *ci) is_device_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_DC; is_host_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_HC; - if (is_device_mode && - (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING)) - hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS); + if (is_device_mode) { + phy_set_mode(ci->phy, PHY_MODE_USB_DEVICE); - if (is_host_mode && - (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING)) - hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS); + if (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING) + hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, + USBMODE_CI_SDIS); + } + + if (is_host_mode) { + phy_set_mode(ci->phy, PHY_MODE_USB_HOST); + + if (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING) + hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, + USBMODE_CI_SDIS); + } if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) { if (ci->hw_bank.lpm)