tty: move obsolete and broken generic_serial drivers to drivers/staging/generic_serial/

As planned by Arnd Bergmann, this moves the following drivers to the
drivers/staging/generic_serial directory where they will be removed
after 2.6.41 if no one steps up to claim them.
	generic_serial
	rio
	ser_a2232
	sx
	vme_scc

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/char/Kconfig

@@ -15,34 +15,6 @@ config DEVKMEM
 	  kind of kernel debugging operations.
 	  When in doubt, say "N".
 
-config SX
-	tristate "Specialix SX (and SI) card support"
-	depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) && BROKEN
-	help
-	  This is a driver for the SX and SI multiport serial cards.
-	  Please read the file <file:Documentation/serial/sx.txt> for details.
-
-	  This driver can only be built as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want).
-	  The module will be called sx. If you want to do that, say M here.
-
-config RIO
-	tristate "Specialix RIO system support"
-	depends on SERIAL_NONSTANDARD && BROKEN
-	help
-	  This is a driver for the Specialix RIO, a smart serial card which
-	  drives an outboard box that can support up to 128 ports.  Product
-	  information is at <http://www.perle.com/support/documentation.html#multiport>.
-	  There are both ISA and PCI versions.
-
-config RIO_OLDPCI
-	bool "Support really old RIO/PCI cards"
-	depends on RIO
-	help
-	  Older RIO PCI cards need some initialization-time configuration to
-	  determine the IRQ and some control addresses.  If you have a RIO and
-	  this doesn't seem to work, try setting this to Y.
-
 config STALDRV
 	bool "Stallion multiport serial support"
 	depends on SERIAL_NONSTANDARD
@@ -55,22 +27,6 @@ config STALDRV
 	  in this case.  If you have never heard about all this, it's safe to
 	  say N.
 
-config A2232
-	tristate "Commodore A2232 serial support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && ZORRO && BROKEN
-	---help---
-	  This option supports the 2232 7-port serial card shipped with the
-	  Amiga 2000 and other Zorro-bus machines, dating from 1989.  At
-	  a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
-	  each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
-	  ports were connected with 8 pin DIN connectors on the card bracket,
-	  for which 8 pin to DB25 adapters were supplied. The card also had
-	  jumpers internally to toggle various pinning configurations.
-
-	  This driver can be built as a module; but then "generic_serial"
-	  will also be built as a module. This has to be loaded before
-	  "ser_a2232". If you want to do this, answer M here.
-
 config SGI_SNSC
 	bool "SGI Altix system controller communication support"
 	depends on (IA64_SGI_SN2 || IA64_GENERIC)

drivers/char/Makefile

@@ -5,13 +5,7 @@
 obj-y				+= mem.o random.o
 obj-$(CONFIG_TTY_PRINTK)	+= ttyprintk.o
 obj-y				+= misc.o
-obj-$(CONFIG_MVME147_SCC)	+= generic_serial.o vme_scc.o
-obj-$(CONFIG_MVME162_SCC)	+= generic_serial.o vme_scc.o
-obj-$(CONFIG_BVME6000_SCC)	+= generic_serial.o vme_scc.o
-obj-$(CONFIG_A2232)		+= ser_a2232.o generic_serial.o
 obj-$(CONFIG_ATARI_DSP56K)	+= dsp56k.o
-obj-$(CONFIG_SX)		+= sx.o generic_serial.o
-obj-$(CONFIG_RIO)		+= rio/ generic_serial.o
 obj-$(CONFIG_RAW_DRIVER)	+= raw.o
 obj-$(CONFIG_SGI_SNSC)		+= snsc.o snsc_event.o
 obj-$(CONFIG_MSPEC)		+= mspec.o

drivers/staging/Kconfig

@@ -43,6 +43,8 @@ if !STAGING_EXCLUDE_BUILD
 
 source "drivers/staging/tty/Kconfig"
 
+source "drivers/staging/generic_serial/Kconfig"
+
 source "drivers/staging/et131x/Kconfig"
 
 source "drivers/staging/slicoss/Kconfig"

drivers/staging/Makefile

@@ -4,6 +4,7 @@
 obj-$(CONFIG_STAGING)		+= staging.o
 
 obj-y += tty/
+obj-y += generic_serial/
 obj-$(CONFIG_ET131X)		+= et131x/
 obj-$(CONFIG_SLICOSS)		+= slicoss/
 obj-$(CONFIG_VIDEO_GO7007)	+= go7007/

drivers/staging/generic_serial/Kconfig

@@ -0,0 +1,45 @@
+config A2232
+	tristate "Commodore A2232 serial support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && ZORRO && BROKEN
+	---help---
+	  This option supports the 2232 7-port serial card shipped with the
+	  Amiga 2000 and other Zorro-bus machines, dating from 1989.  At
+	  a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
+	  each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
+	  ports were connected with 8 pin DIN connectors on the card bracket,
+	  for which 8 pin to DB25 adapters were supplied. The card also had
+	  jumpers internally to toggle various pinning configurations.
+
+	  This driver can be built as a module; but then "generic_serial"
+	  will also be built as a module. This has to be loaded before
+	  "ser_a2232". If you want to do this, answer M here.
+
+config SX
+	tristate "Specialix SX (and SI) card support"
+	depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) && BROKEN
+	help
+	  This is a driver for the SX and SI multiport serial cards.
+	  Please read the file <file:Documentation/serial/sx.txt> for details.
+
+	  This driver can only be built as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called sx. If you want to do that, say M here.
+
+config RIO
+	tristate "Specialix RIO system support"
+	depends on SERIAL_NONSTANDARD && BROKEN
+	help
+	  This is a driver for the Specialix RIO, a smart serial card which
+	  drives an outboard box that can support up to 128 ports.  Product
+	  information is at <http://www.perle.com/support/documentation.html#multiport>.
+	  There are both ISA and PCI versions.
+
+config RIO_OLDPCI
+	bool "Support really old RIO/PCI cards"
+	depends on RIO
+	help
+	  Older RIO PCI cards need some initialization-time configuration to
+	  determine the IRQ and some control addresses.  If you have a RIO and
+	  this doesn't seem to work, try setting this to Y.
+
+

drivers/staging/generic_serial/Makefile

@@ -0,0 +1,6 @@
+obj-$(CONFIG_MVME147_SCC)	+= generic_serial.o vme_scc.o
+obj-$(CONFIG_MVME162_SCC)	+= generic_serial.o vme_scc.o
+obj-$(CONFIG_BVME6000_SCC)	+= generic_serial.o vme_scc.o
+obj-$(CONFIG_A2232)		+= ser_a2232.o generic_serial.o
+obj-$(CONFIG_SX)		+= sx.o generic_serial.o
+obj-$(CONFIG_RIO)		+= rio/ generic_serial.o

drivers/staging/generic_serial/TODO

@@ -0,0 +1,6 @@
+These are a few tty/serial drivers that either do not build,
+or work if they do build, or if they seem to work, are for obsolete
+hardware, or are full of unfixable races and no one uses them anymore.
+
+If no one steps up to adopt any of these drivers, they will be removed
+in the 2.6.41 release.