Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf_counter: Start documenting HAVE_PERF_COUNTERS requirements
  perf_counter: Add forward/backward attribute ABI compatibility
  perf record: Explicity program a default counter
  perf_counter: Remove PERF_TYPE_RAW special casing
  perf_counter: PERF_TYPE_HW_CACHE is a hardware counter too
  powerpc, perf_counter: Fix performance counter event types
  perf_counter/x86: Add a quirk for Atom processors
  perf_counter tools: Remove one L1-data alias

arch/powerpc/kernel/power7-pmu.c

@@ -294,12 +294,12 @@ static void power7_disable_pmc(unsigned int pmc, u64 mmcr[])
 }
 
 static int power7_generic_events[] = {
-	[PERF_COUNT_CPU_CYCLES] = 0x1e,
-	[PERF_COUNT_INSTRUCTIONS] = 2,
-	[PERF_COUNT_CACHE_REFERENCES] = 0xc880,		/* LD_REF_L1_LSU */
-	[PERF_COUNT_CACHE_MISSES] = 0x400f0,		/* LD_MISS_L1 */
-	[PERF_COUNT_BRANCH_INSTRUCTIONS] = 0x10068,	/* BRU_FIN */
-	[PERF_COUNT_BRANCH_MISSES] = 0x400f6,		/* BR_MPRED */
+	[PERF_COUNT_HW_CPU_CYCLES] = 0x1e,
+	[PERF_COUNT_HW_INSTRUCTIONS] = 2,
+	[PERF_COUNT_HW_CACHE_REFERENCES] = 0xc880,	/* LD_REF_L1_LSU*/
+	[PERF_COUNT_HW_CACHE_MISSES] = 0x400f0,		/* LD_MISS_L1	*/
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x10068,	/* BRU_FIN	*/
+	[PERF_COUNT_HW_BRANCH_MISSES] = 0x400f6,	/* BR_MPRED	*/
 };
 
 #define C(x)	PERF_COUNT_HW_CACHE_##x

arch/x86/kernel/cpu/perf_counter.c

@@ -968,6 +968,13 @@ fixed_mode_idx(struct perf_counter *counter, struct hw_perf_counter *hwc)
 	if (!x86_pmu.num_counters_fixed)
 		return -1;
 
+	/*
+	 * Quirk, IA32_FIXED_CTRs do not work on current Atom processors:
+	 */
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+					boot_cpu_data.x86_model == 28)
+		return -1;
+
 	event = hwc->config & ARCH_PERFMON_EVENT_MASK;
 
 	if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))

include/linux/perf_counter.h

@@ -120,6 +120,8 @@ enum perf_counter_sample_format {
 	PERF_SAMPLE_ID				= 1U << 6,
 	PERF_SAMPLE_CPU				= 1U << 7,
 	PERF_SAMPLE_PERIOD			= 1U << 8,
+
+	PERF_SAMPLE_MAX = 1U << 9,		/* non-ABI */
 };
 
 /*
@@ -131,17 +133,26 @@ enum perf_counter_read_format {
 	PERF_FORMAT_TOTAL_TIME_ENABLED		= 1U << 0,
 	PERF_FORMAT_TOTAL_TIME_RUNNING		= 1U << 1,
 	PERF_FORMAT_ID				= 1U << 2,
+
+	PERF_FORMAT_MAX = 1U << 3, 		/* non-ABI */
 };
 
+#define PERF_ATTR_SIZE_VER0	64	/* sizeof first published struct */
+
 /*
  * Hardware event to monitor via a performance monitoring counter:
  */
 struct perf_counter_attr {
+
 	/*
 	 * Major type: hardware/software/tracepoint/etc.
 	 */
 	__u32			type;
-	__u32			__reserved_1;
+
+	/*
+	 * Size of the attr structure, for fwd/bwd compat.
+	 */
+	__u32			size;
 
 	/*
 	 * Type specific configuration information.
@@ -168,12 +179,12 @@ struct perf_counter_attr {
 				comm	       :  1, /* include comm data     */
 				freq           :  1, /* use freq, not period  */
 
-				__reserved_2   : 53;
+				__reserved_1   : 53;
 
 	__u32			wakeup_events;	/* wakeup every n events */
-	__u32			__reserved_3;
+	__u32			__reserved_2;
 
-	__u64			__reserved_4;
+	__u64			__reserved_3;
 };
 
 /*
@@ -621,7 +632,8 @@ extern int perf_counter_overflow(struct perf_counter *counter, int nmi,
 static inline int is_software_counter(struct perf_counter *counter)
 {
 	return (counter->attr.type != PERF_TYPE_RAW) &&
-		(counter->attr.type != PERF_TYPE_HARDWARE);
+		(counter->attr.type != PERF_TYPE_HARDWARE) &&
+		(counter->attr.type != PERF_TYPE_HW_CACHE);
 }
 
 extern void perf_swcounter_event(u32, u64, int, struct pt_regs *, u64);

include/linux/syscalls.h

@@ -758,6 +758,6 @@ int kernel_execve(const char *filename, char *const argv[], char *const envp[]);
 
 
 asmlinkage long sys_perf_counter_open(
-		const struct perf_counter_attr __user *attr_uptr,
+		struct perf_counter_attr __user *attr_uptr,
 		pid_t pid, int cpu, int group_fd, unsigned long flags);
 #endif

init/Kconfig

@@ -936,6 +936,8 @@ config AIO
 
 config HAVE_PERF_COUNTERS
 	bool
+	help
+	  See tools/perf/design.txt for details.
 
 menu "Performance Counters"
 

kernel/perf_counter.c

@@ -3570,12 +3570,8 @@ perf_counter_alloc(struct perf_counter_attr *attr,
 	if (attr->inherit && (attr->sample_type & PERF_SAMPLE_GROUP))
 		goto done;
 
-	if (attr->type == PERF_TYPE_RAW) {
-		pmu = hw_perf_counter_init(counter);
-		goto done;
-	}
-
 	switch (attr->type) {
+	case PERF_TYPE_RAW:
 	case PERF_TYPE_HARDWARE:
 	case PERF_TYPE_HW_CACHE:
 		pmu = hw_perf_counter_init(counter);
@@ -3588,6 +3584,9 @@ perf_counter_alloc(struct perf_counter_attr *attr,
 	case PERF_TYPE_TRACEPOINT:
 		pmu = tp_perf_counter_init(counter);
 		break;
+
+	default:
+		break;
 	}
 done:
 	err = 0;
@@ -3614,6 +3613,85 @@ perf_counter_alloc(struct perf_counter_attr *attr,
 	return counter;
 }
 
+static int perf_copy_attr(struct perf_counter_attr __user *uattr,
+			  struct perf_counter_attr *attr)
+{
+	int ret;
+	u32 size;
+
+	if (!access_ok(VERIFY_WRITE, uattr, PERF_ATTR_SIZE_VER0))
+		return -EFAULT;
+
+	/*
+	 * zero the full structure, so that a short copy will be nice.
+	 */
+	memset(attr, 0, sizeof(*attr));
+
+	ret = get_user(size, &uattr->size);
+	if (ret)
+		return ret;
+
+	if (size > PAGE_SIZE)	/* silly large */
+		goto err_size;
+
+	if (!size)		/* abi compat */
+		size = PERF_ATTR_SIZE_VER0;
+
+	if (size < PERF_ATTR_SIZE_VER0)
+		goto err_size;
+
+	/*
+	 * If we're handed a bigger struct than we know of,
+	 * ensure all the unknown bits are 0.
+	 */
+	if (size > sizeof(*attr)) {
+		unsigned long val;
+		unsigned long __user *addr;
+		unsigned long __user *end;
+
+		addr = PTR_ALIGN((void __user *)uattr + sizeof(*attr),
+				sizeof(unsigned long));
+		end  = PTR_ALIGN((void __user *)uattr + size,
+				sizeof(unsigned long));
+
+		for (; addr < end; addr += sizeof(unsigned long)) {
+			ret = get_user(val, addr);
+			if (ret)
+				return ret;
+			if (val)
+				goto err_size;
+		}
+	}
+
+	ret = copy_from_user(attr, uattr, size);
+	if (ret)
+		return -EFAULT;
+
+	/*
+	 * If the type exists, the corresponding creation will verify
+	 * the attr->config.
+	 */
+	if (attr->type >= PERF_TYPE_MAX)
+		return -EINVAL;
+
+	if (attr->__reserved_1 || attr->__reserved_2 || attr->__reserved_3)
+		return -EINVAL;
+
+	if (attr->sample_type & ~(PERF_SAMPLE_MAX-1))
+		return -EINVAL;
+
+	if (attr->read_format & ~(PERF_FORMAT_MAX-1))
+		return -EINVAL;
+
+out:
+	return ret;
+
+err_size:
+	put_user(sizeof(*attr), &uattr->size);
+	ret = -E2BIG;
+	goto out;
+}
+
 /**
  * sys_perf_counter_open - open a performance counter, associate it to a task/cpu
  *
@@ -3623,7 +3701,7 @@ perf_counter_alloc(struct perf_counter_attr *attr,
  * @group_fd:		group leader counter fd
  */
 SYSCALL_DEFINE5(perf_counter_open,
-		const struct perf_counter_attr __user *, attr_uptr,
+		struct perf_counter_attr __user *, attr_uptr,
 		pid_t, pid, int, cpu, int, group_fd, unsigned long, flags)
 {
 	struct perf_counter *counter, *group_leader;
@@ -3639,8 +3717,9 @@ SYSCALL_DEFINE5(perf_counter_open,
 	if (flags)
 		return -EINVAL;
 
-	if (copy_from_user(&attr, attr_uptr, sizeof(attr)) != 0)
-		return -EFAULT;
+	ret = perf_copy_attr(attr_uptr, &attr);
+	if (ret)
+		return ret;
 
 	if (!attr.exclude_kernel) {
 		if (perf_paranoid_kernel() && !capable(CAP_SYS_ADMIN))

tools/perf/builtin-record.c

@@ -568,8 +568,11 @@ int cmd_record(int argc, const char **argv, const char *prefix)
 	if (!argc && target_pid == -1 && !system_wide)
 		usage_with_options(record_usage, options);
 
-	if (!nr_counters)
-		nr_counters = 1;
+	if (!nr_counters) {
+		nr_counters	= 1;
+		attrs[0].type	= PERF_TYPE_HARDWARE;
+		attrs[0].config = PERF_COUNT_HW_CPU_CYCLES;
+	}
 
 	for (counter = 0; counter < nr_counters; counter++) {
 		if (attrs[counter].sample_period)

tools/perf/design.txt

@@ -440,3 +440,18 @@ by this process or by another, and doesn't affect any counters that
 this process has created on other processes.  It only enables or
 disables the group leaders, not any other members in the groups.
 
+
+Arch requirements
+-----------------
+
+If your architecture does not have hardware performance metrics, you can
+still use the generic software counters based on hrtimers for sampling.
+
+So to start with, in order to add HAVE_PERF_COUNTERS to your Kconfig, you
+will need at least this:
+	- asm/perf_counter.h - a basic stub will suffice at first
+	- support for atomic64 types (and associated helper functions)
+	- set_perf_counter_pending() implemented
+
+If your architecture does have hardware capabilities, you can override the
+weak stub hw_perf_counter_init() to register hardware counters.

tools/perf/perf.h

@@ -53,11 +53,12 @@ static inline unsigned long long rdclock(void)
 	_min1 < _min2 ? _min1 : _min2; })
 
 static inline int
-sys_perf_counter_open(struct perf_counter_attr *attr_uptr,
+sys_perf_counter_open(struct perf_counter_attr *attr,
 		      pid_t pid, int cpu, int group_fd,
 		      unsigned long flags)
 {
-	return syscall(__NR_perf_counter_open, attr_uptr, pid, cpu,
+	attr->size = sizeof(*attr);
+	return syscall(__NR_perf_counter_open, attr, pid, cpu,
 		       group_fd, flags);
 }
 

tools/perf/util/parse-events.c

@@ -75,7 +75,7 @@ static char *sw_event_names[] = {
 #define MAX_ALIASES 8
 
 static char *hw_cache [][MAX_ALIASES] = {
-	{ "L1-data"		, "l1-d", "l1d", "l1"				},
+	{ "L1-data"		, "l1-d", "l1d"					},
 	{ "L1-instruction"	, "l1-i", "l1i"					},
 	{ "L2"			, "l2"						},
 	{ "Data-TLB"		, "dtlb", "d-tlb"				},