can: sja1000: Makefile/Kconfig: sort alphabetically

This patch sorts the drivers in the Makefile alphabetically and arranges
the Kconfig file accordingly.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/sja1000/Kconfig

@@ -1,34 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0-only
+
 menuconfig CAN_SJA1000
 	tristate "Philips/NXP SJA1000 devices"
 	depends on HAS_IOMEM
 
 if CAN_SJA1000
 
-config CAN_SJA1000_ISA
-	tristate "ISA Bus based legacy SJA1000 driver"
-	---help---
-	  This driver adds legacy support for SJA1000 chips connected to
-	  the ISA bus using I/O port, memory mapped or indirect access.
-
-config CAN_SJA1000_PLATFORM
-	tristate "Generic Platform Bus based SJA1000 driver"
-	---help---
-	  This driver adds support for the SJA1000 chips connected to
-	  the "platform bus" (Linux abstraction for directly to the
-	  processor attached devices).  Which can be found on various
-	  boards from Phytec (http://www.phytec.de) like the PCM027,
-	  PCM038. It also provides the OpenFirmware "platform bus" found
-	  on embedded systems with OpenFirmware bindings, e.g. if you
-	  have a PowerPC based system you may want to enable this option.
-
-config CAN_EMS_PCMCIA
-	tristate "EMS CPC-CARD Card"
-	depends on PCMCIA
-	---help---
-	  This driver is for the one or two channel CPC-CARD cards from
-	  EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
-
 config CAN_EMS_PCI
 	tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
 	depends on PCI
@@ -37,15 +14,19 @@ config CAN_EMS_PCI
 	  CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
 	  (http://www.ems-wuensche.de).
 
-config CAN_PEAK_PCMCIA
+config CAN_EMS_PCMCIA
-	tristate "PEAK PCAN-PC Card"
+	tristate "EMS CPC-CARD Card"
 	depends on PCMCIA
-	depends on HAS_IOPORT_MAP
 	---help---
-	  This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
+	  This driver is for the one or two channel CPC-CARD cards from
-	  from PEAK-System (http://www.peak-system.com). To compile this
+	  EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
-	  driver as a module, choose M here: the module will be called
+
-	  peak_pcmcia.
+config CAN_KVASER_PCI
+	tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
+	depends on PCI
+	---help---
+	  This driver is for the PCIcanx and PCIcan cards (1, 2 or
+	  4 channel) from Kvaser (http://www.kvaser.com).
 
 config CAN_PEAK_PCI
 	tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"
@@ -66,12 +47,15 @@ config CAN_PEAK_PCIEC
 	  Technik. This will also automatically select I2C and I2C_ALGO
 	  configuration options.
 
-config CAN_KVASER_PCI
+config CAN_PEAK_PCMCIA
-	tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
+	tristate "PEAK PCAN-PC Card"
-	depends on PCI
+	depends on PCMCIA
+	depends on HAS_IOPORT_MAP
 	---help---
-	  This driver is for the PCIcanx and PCIcan cards (1, 2 or
+	  This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
-	  4 channel) from Kvaser (http://www.kvaser.com).
+	  from PEAK-System (http://www.peak-system.com). To compile this
+	  driver as a module, choose M here: the module will be called
+	  peak_pcmcia.
 
 config CAN_PLX_PCI
 	tristate "PLX90xx PCI-bridge based Cards"
@@ -91,6 +75,23 @@ config CAN_PLX_PCI
 	   - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com)
 	   - ASEM CAN raw - 2 isolated CAN channels (www.asem.it)
 
+config CAN_SJA1000_ISA
+	tristate "ISA Bus based legacy SJA1000 driver"
+	---help---
+	  This driver adds legacy support for SJA1000 chips connected to
+	  the ISA bus using I/O port, memory mapped or indirect access.
+
+config CAN_SJA1000_PLATFORM
+	tristate "Generic Platform Bus based SJA1000 driver"
+	---help---
+	  This driver adds support for the SJA1000 chips connected to
+	  the "platform bus" (Linux abstraction for directly to the
+	  processor attached devices).  Which can be found on various
+	  boards from Phytec (http://www.phytec.de) like the PCM027,
+	  PCM038. It also provides the OpenFirmware "platform bus" found
+	  on embedded systems with OpenFirmware bindings, e.g. if you
+	  have a PowerPC based system you may want to enable this option.
+
 config CAN_TSCAN1
 	tristate "TS-CAN1 PC104 boards"
 	depends on ISA

drivers/net/can/sja1000/Makefile

@@ -3,13 +3,13 @@
 #  Makefile for the SJA1000 CAN controller drivers.
 #
 
+obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o
+obj-$(CONFIG_CAN_EMS_PCMCIA) += ems_pcmcia.o
+obj-$(CONFIG_CAN_KVASER_PCI) += kvaser_pci.o
+obj-$(CONFIG_CAN_PEAK_PCI) += peak_pci.o
+obj-$(CONFIG_CAN_PEAK_PCMCIA) += peak_pcmcia.o
+obj-$(CONFIG_CAN_PLX_PCI) += plx_pci.o
 obj-$(CONFIG_CAN_SJA1000) += sja1000.o
 obj-$(CONFIG_CAN_SJA1000_ISA) += sja1000_isa.o
 obj-$(CONFIG_CAN_SJA1000_PLATFORM) += sja1000_platform.o
-obj-$(CONFIG_CAN_EMS_PCMCIA) += ems_pcmcia.o
-obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o
-obj-$(CONFIG_CAN_KVASER_PCI) += kvaser_pci.o
-obj-$(CONFIG_CAN_PEAK_PCMCIA) += peak_pcmcia.o
-obj-$(CONFIG_CAN_PEAK_PCI) += peak_pci.o
-obj-$(CONFIG_CAN_PLX_PCI) += plx_pci.o
 obj-$(CONFIG_CAN_TSCAN1) += tscan1.o