openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

[SCSI] sym2 version 2.2.1 

sym2 version 2.2.1:
 - Fix MMIO BAR detection (Thanks to Bob Picco)
 - Fix odd-sized transfers with a wide bus (Thanks to Larry Stephens)
 - Write posting fixes (Thanks to Thibaut Varene)
 - Change one of the GFP_KERNEL allocations back into a GFP_ATOMIC
 - Make CCB_BA() return a script-endian address
 - Move range checks and disabling of devices from the queuecommand path
   to slave_alloc()
 - Remove a warning in sym_setup_cdb()
 - Keep a pointer to the scsi_target instead of the scsi_dev in the tcb
 - Remove a check for the upper layers passing an oversized cmd
 - Replace CAM_REQ_ constants with the Linux DID_ constants
 - Replace CAM_DIR_ constants with the Linux DMA_ constants
 - Inline sym_read_parisc_pdc() on non-parisc systems

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
This commit is contained in:
Matthew Wilcox 2005-05-20 19:15:43 +01:00 committed by James Bottomley
parent 7c00ffa314
commit 53222b9069
6 changed files with 106 additions and 137 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/scsi/sym53c8xx_2/sym_defs.h
View File

@ -40,7 +40,7 @@
#ifndef SYM_DEFS_H
#define SYM_DEFS_H
#define SYM_VERSION "2.2.0"
#define SYM_VERSION "2.2.1"
#define SYM_DRIVER_NAME "sym-" SYM_VERSION
/*

120
drivers/scsi/sym53c8xx_2/sym_glue.c
View File

@ -155,10 +155,11 @@ pci_get_base_address(struct pci_dev *pdev, int index, unsigned long *basep)
base = tmp;
if ((tmp & 0x7) == PCI_BASE_ADDRESS_MEM_TYPE_64) {
pci_read_config_dword(pdev, PCI_BAR_OFFSET(index++), &tmp);
if (tmp > 0)
if (tmp > 0) {
dev_err(&pdev->dev,
"BAR %d is 64-bit, disabling\n", index - 1);
base = 0;
base = 0;
}
}
if ((base & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) {
@ -389,13 +390,20 @@ static int sym_scatter_no_sglist(struct sym_hcb *np, struct sym_ccb *cp, struct
{
struct sym_tblmove *data = &cp->phys.data[SYM_CONF_MAX_SG-1];
int segment;
unsigned int len = cmd->request_bufflen;
cp->data_len = cmd->request_bufflen;
if (cmd->request_bufflen) {
if (len) {
dma_addr_t baddr = map_scsi_single_data(np, cmd);
if (baddr) {
sym_build_sge(np, data, baddr, cmd->request_bufflen);
if (len & 1) {
struct sym_tcb *tp = &np->target[cp->target];
if (tp->head.wval & EWS) {
len++;
cp->odd_byte_adjustment++;
}
}
cp->data_len = len;
sym_build_sge(np, data, baddr, len);
segment = 1;
} else {
segment = -2;
@ -418,6 +426,7 @@ static int sym_scatter(struct sym_hcb *np, struct sym_ccb *cp, struct scsi_cmnd
segment = sym_scatter_no_sglist(np, cp, cmd);
else if ((use_sg = map_scsi_sg_data(np, cmd)) > 0) {
struct scatterlist *scatter = (struct scatterlist *)cmd->buffer;
struct sym_tcb *tp = &np->target[cp->target];
struct sym_tblmove *data;
if (use_sg > SYM_CONF_MAX_SG) {
@ -431,6 +440,11 @@ static int sym_scatter(struct sym_hcb *np, struct sym_ccb *cp, struct scsi_cmnd
dma_addr_t baddr = sg_dma_address(&scatter[segment]);
unsigned int len = sg_dma_len(&scatter[segment]);
if ((len & 1) && (tp->head.wval & EWS)) {
len++;
cp->odd_byte_adjustment++;
}
sym_build_sge(np, &data[segment], baddr, len);
cp->data_len += len;
}
@ -456,10 +470,8 @@ static int sym_queue_command(struct sym_hcb *np, struct scsi_cmnd *cmd)
* Minimal checkings, so that we will not
* go outside our tables.
*/
if (sdev->id == np->myaddr ||
sdev->id >= SYM_CONF_MAX_TARGET ||
sdev->lun >= SYM_CONF_MAX_LUN) {
sym_xpt_done2(np, cmd, CAM_DEV_NOT_THERE);
if (sdev->id == np->myaddr) {
sym_xpt_done2(np, cmd, DID_NO_CONNECT);
return 0;
}
@ -468,28 +480,6 @@ static int sym_queue_command(struct sym_hcb *np, struct scsi_cmnd *cmd)
*/
tp = &np->target[sdev->id];
/*
* Complete the 1st INQUIRY command with error
* condition if the device is flagged NOSCAN
* at BOOT in the NVRAM. This may speed up
* the boot and maintain coherency with BIOS
* device numbering. Clearing the flag allows
* user to rescan skipped devices later.
* We also return error for devices not flagged
* for SCAN LUNS in the NVRAM since some mono-lun
* devices behave badly when asked for some non
* zero LUN. Btw, this is an absolute hack.:-)
*/
if (cmd->cmnd[0] == 0x12 || cmd->cmnd[0] == 0x0) {
if ((tp->usrflags & SYM_SCAN_BOOT_DISABLED) ||
((tp->usrflags & SYM_SCAN_LUNS_DISABLED) &&
sdev->lun != 0)) {
tp->usrflags &= ~SYM_SCAN_BOOT_DISABLED;
sym_xpt_done2(np, cmd, CAM_DEV_NOT_THERE);
return 0;
}
}
/*
* Select tagged/untagged.
*/
@ -511,23 +501,10 @@ static int sym_queue_command(struct sym_hcb *np, struct scsi_cmnd *cmd)
*/
static inline int sym_setup_cdb(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp)
{
u32 cmd_ba;
int cmd_len;
/*
* CDB is 16 bytes max.
*/
if (cmd->cmd_len > sizeof(cp->cdb_buf)) {
sym_set_cam_status(cp->cmd, CAM_REQ_INVALID);
return -1;
}
memcpy(cp->cdb_buf, cmd->cmnd, cmd->cmd_len);
cmd_ba = CCB_BA (cp, cdb_buf[0]);
cmd_len = cmd->cmd_len;
cp->phys.cmd.addr = cpu_to_scr(cmd_ba);
cp->phys.cmd.size = cpu_to_scr(cmd_len);
cp->phys.cmd.addr = CCB_BA(cp, cdb_buf[0]);
cp->phys.cmd.size = cpu_to_scr(cmd->cmd_len);
return 0;
}
@ -554,10 +531,7 @@ int sym_setup_data_and_start(struct sym_hcb *np, struct scsi_cmnd *cmd, struct s
if (dir != DMA_NONE) {
cp->segments = sym_scatter(np, cp, cmd);
if (cp->segments < 0) {
if (cp->segments == -2)
sym_set_cam_status(cmd, CAM_RESRC_UNAVAIL);
else
sym_set_cam_status(cmd, CAM_REQ_TOO_BIG);
sym_set_cam_status(cmd, DID_ERROR);
goto out_abort;
}
} else {
@ -855,7 +829,7 @@ static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd)
ep->to_do = to_do;
/* Complete the command with locks held as required by the driver */
if (to_do == SYM_EH_DO_COMPLETE)
sym_xpt_done2(np, cmd, CAM_REQ_ABORTED);
sym_xpt_done2(np, cmd, DID_ABORT);
/* Wait for completion with locks released, as required by kernel */
if (to_do == SYM_EH_DO_WAIT) {
@ -921,7 +895,7 @@ static void sym_tune_dev_queuing(struct sym_tcb *tp, int lun, u_short reqtags)
lp->s.reqtags = reqtags;
if (reqtags != oldtags) {
dev_info(&tp->sdev->sdev_target->dev,
dev_info(&tp->starget->dev,
"tagged command queuing %s, command queue depth %d.\n",
lp->s.reqtags ? "enabled" : "disabled",
lp->started_limit);
@ -981,24 +955,36 @@ static int device_queue_depth(struct sym_hcb *np, int target, int lun)
return DEF_DEPTH;
}
static int sym53c8xx_slave_alloc(struct scsi_device *device)
static int sym53c8xx_slave_alloc(struct scsi_device *sdev)
{
struct sym_hcb *np = sym_get_hcb(device->host);
struct sym_tcb *tp = &np->target[device->id];
if (!tp->sdev)
tp->sdev = device;
struct sym_hcb *np;
struct sym_tcb *tp;
if (sdev->id >= SYM_CONF_MAX_TARGET || sdev->lun >= SYM_CONF_MAX_LUN)
return -ENXIO;
np = sym_get_hcb(sdev->host);
tp = &np->target[sdev->id];
/*
* Fail the device init if the device is flagged NOSCAN at BOOT in
* the NVRAM. This may speed up boot and maintain coherency with
* BIOS device numbering. Clearing the flag allows the user to
* rescan skipped devices later. We also return an error for
* devices not flagged for SCAN LUNS in the NVRAM since some single
* lun devices behave badly when asked for a non zero LUN.
*/
if ((tp->usrflags & SYM_SCAN_BOOT_DISABLED) ||
((tp->usrflags & SYM_SCAN_LUNS_DISABLED) && sdev->lun != 0)) {
tp->usrflags &= ~SYM_SCAN_BOOT_DISABLED;
return -ENXIO;
}
tp->starget = sdev->sdev_target;
return 0;
}
static void sym53c8xx_slave_destroy(struct scsi_device *device)
{
struct sym_hcb *np = sym_get_hcb(device->host);
struct sym_tcb *tp = &np->target[device->id];
if (tp->sdev == device)
tp->sdev = NULL;
}
/*
* Linux entry point for device queue sizing.
*/
@ -1897,6 +1883,7 @@ static int sym_detach(struct sym_hcb *np, struct pci_dev *pdev)
*/
printk("%s: resetting chip\n", sym_name(np));
OUTB(np, nc_istat, SRST);
INB(np, nc_mbox1);
udelay(10);
OUTB(np, nc_istat, 0);
@ -1915,7 +1902,6 @@ static struct scsi_host_template sym2_template = {
.queuecommand = sym53c8xx_queue_command,
.slave_alloc = sym53c8xx_slave_alloc,
.slave_configure = sym53c8xx_slave_configure,
.slave_destroy = sym53c8xx_slave_destroy,
.eh_abort_handler = sym53c8xx_eh_abort_handler,
.eh_device_reset_handler = sym53c8xx_eh_device_reset_handler,
.eh_bus_reset_handler = sym53c8xx_eh_bus_reset_handler,

27
drivers/scsi/sym53c8xx_2/sym_glue.h
View File

@ -141,33 +141,6 @@
#define cpu_to_scr(dw) cpu_to_le32(dw)
#define scr_to_cpu(dw) le32_to_cpu(dw)
/*
* Remap some status field values.
*/
#define CAM_REQ_CMP DID_OK
#define CAM_SEL_TIMEOUT DID_NO_CONNECT
#define CAM_CMD_TIMEOUT DID_TIME_OUT
#define CAM_REQ_ABORTED DID_ABORT
#define CAM_UNCOR_PARITY DID_PARITY
#define CAM_SCSI_BUS_RESET DID_RESET
#define CAM_REQUEUE_REQ DID_SOFT_ERROR
#define CAM_UNEXP_BUSFREE DID_ERROR
#define CAM_SCSI_BUSY DID_BUS_BUSY
#define CAM_DEV_NOT_THERE DID_NO_CONNECT
#define CAM_REQ_INVALID DID_ERROR
#define CAM_REQ_TOO_BIG DID_ERROR
#define CAM_RESRC_UNAVAIL DID_ERROR
/*
* Remap data direction values.
*/
#define CAM_DIR_NONE DMA_NONE
#define CAM_DIR_IN DMA_FROM_DEVICE
#define CAM_DIR_OUT DMA_TO_DEVICE
#define CAM_DIR_UNKNOWN DMA_BIDIRECTIONAL
/*
* These ones are used as return code from
* error recovery handlers under Linux.

65
drivers/scsi/sym53c8xx_2/sym_hipd.c
View File

@ -97,7 +97,7 @@ static void sym_print_msg(struct sym_ccb *cp, char *label, u_char *msg)
static void sym_print_nego_msg(struct sym_hcb *np, int target, char *label, u_char *msg)
{
struct sym_tcb *tp = &np->target[target];
dev_info(&tp->sdev->sdev_target->dev, "%s: ", label);
dev_info(&tp->starget->dev, "%s: ", label);
sym_show_msg(msg);
printf(".\n");
@ -149,8 +149,10 @@ static char *sym_scsi_bus_mode(int mode)
static void sym_chip_reset (struct sym_hcb *np)
{
OUTB(np, nc_istat, SRST);
INB(np, nc_mbox1);
udelay(10);
OUTB(np, nc_istat, 0);
INB(np, nc_mbox1);
udelay(2000); /* For BUS MODE to settle */
}
@ -216,6 +218,7 @@ int sym_reset_scsi_bus(struct sym_hcb *np, int enab_int)
OUTB(np, nc_stest3, TE);
OUTB(np, nc_dcntl, (np->rv_dcntl & IRQM));
OUTB(np, nc_scntl1, CRST);
INB(np, nc_mbox1);
udelay(200);
if (!SYM_SETUP_SCSI_BUS_CHECK)
@ -280,8 +283,10 @@ static void sym_selectclock(struct sym_hcb *np, u_char scntl3)
if (!i)
printf("%s: the chip cannot lock the frequency\n",
sym_name(np));
} else
udelay((50+10));
} else {
INB(np, nc_mbox1);
udelay(50+10);
}
OUTB(np, nc_stest3, HSC); /* Halt the scsi clock */
OUTB(np, nc_scntl3, scntl3);
OUTB(np, nc_stest1, (DBLEN|DBLSEL));/* Select clock multiplier */
@ -1445,7 +1450,7 @@ static void sym_check_goals(struct sym_hcb *np, struct scsi_target *starget,
static int sym_prepare_nego(struct sym_hcb *np, struct sym_ccb *cp, u_char *msgptr)
{
struct sym_tcb *tp = &np->target[cp->target];
struct scsi_target *starget = tp->sdev->sdev_target;
struct scsi_target *starget = tp->starget;
struct sym_trans *goal = &tp->tgoal;
int msglen = 0;
int nego;
@ -1690,7 +1695,7 @@ static void sym_flush_comp_queue(struct sym_hcb *np, int cam_status)
if (cam_status)
sym_set_cam_status(cmd, cam_status);
#ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
if (sym_get_cam_status(cmd) == CAM_REQUEUE_REQ) {
if (sym_get_cam_status(cmd) == DID_SOFT_ERROR) {
struct sym_tcb *tp = &np->target[cp->target];
struct sym_lcb *lp = sym_lp(tp, cp->lun);
if (lp) {
@ -1791,12 +1796,13 @@ void sym_start_up (struct sym_hcb *np, int reason)
/*
* Wakeup all pending jobs.
*/
sym_flush_busy_queue(np, CAM_SCSI_BUS_RESET);
sym_flush_busy_queue(np, DID_RESET);
/*
* Init chip.
*/
OUTB(np, nc_istat, 0x00); /* Remove Reset, abort */
INB(np, nc_mbox1);
udelay(2000); /* The 895 needs time for the bus mode to settle */
OUTB(np, nc_scntl0, np->rv_scntl0 | 0xc0);
@ -1905,6 +1911,7 @@ void sym_start_up (struct sym_hcb *np, int reason)
if (np->features & (FE_ULTRA2|FE_ULTRA3)) {
OUTONW(np, nc_sien, SBMC);
if (reason == 0) {
INB(np, nc_mbox1);
mdelay(100);
INW(np, nc_sist);
}
@ -2074,7 +2081,7 @@ static void sym_settrans(struct sym_hcb *np, int target, u_char opts, u_char ofs
static void sym_setwide(struct sym_hcb *np, int target, u_char wide)
{
struct sym_tcb *tp = &np->target[target];
struct scsi_target *starget = tp->sdev->sdev_target;
struct scsi_target *starget = tp->starget;
if (spi_width(starget) == wide)
return;
@ -2102,7 +2109,7 @@ sym_setsync(struct sym_hcb *np, int target,
u_char ofs, u_char per, u_char div, u_char fak)
{
struct sym_tcb *tp = &np->target[target];
struct scsi_target *starget = tp->sdev->sdev_target;
struct scsi_target *starget = tp->starget;
u_char wide = (tp->head.wval & EWS) ? BUS_16_BIT : BUS_8_BIT;
sym_settrans(np, target, 0, ofs, per, wide, div, fak);
@ -2129,7 +2136,7 @@ sym_setpprot(struct sym_hcb *np, int target, u_char opts, u_char ofs,
u_char per, u_char wide, u_char div, u_char fak)
{
struct sym_tcb *tp = &np->target[target];
struct scsi_target *starget = tp->sdev->sdev_target;
struct scsi_target *starget = tp->starget;
sym_settrans(np, target, opts, ofs, per, wide, div, fak);
@ -2944,7 +2951,7 @@ void sym_interrupt (struct sym_hcb *np)
* Dequeue from the START queue all CCBs that match
* a given target/lun/task condition (-1 means all),
* and move them from the BUSY queue to the COMP queue
* with CAM_REQUEUE_REQ status condition.
* with DID_SOFT_ERROR status condition.
* This function is used during error handling/recovery.
* It is called with SCRIPTS not running.
*/
@ -2974,7 +2981,7 @@ sym_dequeue_from_squeue(struct sym_hcb *np, int i, int target, int lun, int task
if ((target == -1 || cp->target == target) &&
(lun == -1 || cp->lun == lun) &&
(task == -1 || cp->tag == task)) {
sym_set_cam_status(cp->cmd, CAM_REQUEUE_REQ);
sym_set_cam_status(cp->cmd, DID_SOFT_ERROR);
sym_remque(&cp->link_ccbq);
sym_insque_tail(&cp->link_ccbq, &np->comp_ccbq);
}
@ -3093,13 +3100,13 @@ static void sym_sir_bad_scsi_status(struct sym_hcb *np, int num, struct sym_ccb
/*
* Message table indirect structure.
*/
cp->phys.smsg.addr = cpu_to_scr(CCB_BA(cp, scsi_smsg2));
cp->phys.smsg.addr = CCB_BA(cp, scsi_smsg2);
cp->phys.smsg.size = cpu_to_scr(msglen);
/*
* sense command
*/
cp->phys.cmd.addr = cpu_to_scr(CCB_BA(cp, sensecmd));
cp->phys.cmd.addr = CCB_BA(cp, sensecmd);
cp->phys.cmd.size = cpu_to_scr(6);
/*
@ -3116,7 +3123,7 @@ static void sym_sir_bad_scsi_status(struct sym_hcb *np, int num, struct sym_ccb
* sense data
*/
memset(cp->sns_bbuf, 0, SYM_SNS_BBUF_LEN);
cp->phys.sense.addr = cpu_to_scr(CCB_BA(cp, sns_bbuf));
cp->phys.sense.addr = CCB_BA(cp, sns_bbuf);
cp->phys.sense.size = cpu_to_scr(SYM_SNS_BBUF_LEN);
/*
@ -3198,7 +3205,7 @@ int sym_clear_tasks(struct sym_hcb *np, int cam_status, int target, int lun, int
sym_insque_tail(&cp->link_ccbq, &np->comp_ccbq);
/* Preserve the software timeout condition */
if (sym_get_cam_status(cmd) != CAM_CMD_TIMEOUT)
if (sym_get_cam_status(cmd) != DID_TIME_OUT)
sym_set_cam_status(cmd, cam_status);
++i;
#if 0
@ -3366,7 +3373,7 @@ static void sym_sir_task_recovery(struct sym_hcb *np, int num)
* Make sure at least our IO to abort has been dequeued.
*/
#ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING
assert(i && sym_get_cam_status(cp->cmd) == CAM_REQUEUE_REQ);
assert(i && sym_get_cam_status(cp->cmd) == DID_SOFT_ERROR);
#else
sym_remque(&cp->link_ccbq);
sym_insque_tail(&cp->link_ccbq, &np->comp_ccbq);
@ -3375,9 +3382,9 @@ static void sym_sir_task_recovery(struct sym_hcb *np, int num)
* Keep track in cam status of the reason of the abort.
*/
if (cp->to_abort == 2)
sym_set_cam_status(cp->cmd, CAM_CMD_TIMEOUT);
sym_set_cam_status(cp->cmd, DID_TIME_OUT);
else
sym_set_cam_status(cp->cmd, CAM_REQ_ABORTED);
sym_set_cam_status(cp->cmd, DID_ABORT);
/*
* Complete with error everything that we have dequeued.
@ -3491,7 +3498,7 @@ static void sym_sir_task_recovery(struct sym_hcb *np, int num)
* conditions not due to timeout.
*/
if (cp->to_abort == 2)
sym_set_cam_status(cp->cmd, CAM_CMD_TIMEOUT);
sym_set_cam_status(cp->cmd, DID_TIME_OUT);
cp->to_abort = 0; /* We donnot expect to fail here */
break;
@ -3502,7 +3509,7 @@ static void sym_sir_task_recovery(struct sym_hcb *np, int num)
case SIR_ABORT_SENT:
target = INB(np, nc_sdid) & 0xf;
tp = &np->target[target];
starget = tp->sdev->sdev_target;
starget = tp->starget;
/*
** If we didn't abort anything, leave here.
@ -3551,7 +3558,7 @@ static void sym_sir_task_recovery(struct sym_hcb *np, int num)
*/
i = (INL(np, nc_scratcha) - np->squeue_ba) / 4;
sym_dequeue_from_squeue(np, i, target, lun, -1);
sym_clear_tasks(np, CAM_REQ_ABORTED, target, lun, task);
sym_clear_tasks(np, DID_ABORT, target, lun, task);
sym_flush_comp_queue(np, 0);
/*
@ -3566,7 +3573,7 @@ static void sym_sir_task_recovery(struct sym_hcb *np, int num)
* Print to the log the message we intend to send.
*/
if (num == SIR_TARGET_SELECTED) {
dev_info(&tp->sdev->sdev_target->dev, "control msgout:");
dev_info(&tp->starget->dev, "control msgout:");
sym_printl_hex(np->abrt_msg, np->abrt_tbl.size);
np->abrt_tbl.size = cpu_to_scr(np->abrt_tbl.size);
}
@ -3877,6 +3884,8 @@ int sym_compute_residual(struct sym_hcb *np, struct sym_ccb *cp)
resid += (tmp & 0xffffff);
}
resid -= cp->odd_byte_adjustment;
/*
* Hopefully, the result is not too wrong.
*/
@ -4758,10 +4767,8 @@ struct sym_ccb *sym_get_ccb (struct sym_hcb *np, struct scsi_cmnd *cmd, u_char t
}
#endif
/*
* Remember all informations needed to free this CCB.
*/
cp->to_abort = 0;
cp->odd_byte_adjustment = 0;
cp->tag = tag;
cp->order = tag_order;
cp->target = tn;
@ -5104,7 +5111,7 @@ static void sym_alloc_lcb_tags (struct sym_hcb *np, u_char tn, u_char ln)
lp->itlq_tbl = sym_calloc_dma(SYM_CONF_MAX_TASK*4, "ITLQ_TBL");
if (!lp->itlq_tbl)
goto fail;
lp->cb_tags = kcalloc(SYM_CONF_MAX_TASK, 1, GFP_KERNEL);
lp->cb_tags = kcalloc(SYM_CONF_MAX_TASK, 1, GFP_ATOMIC);
if (!lp->cb_tags) {
sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK*4, "ITLQ_TBL");
lp->itlq_tbl = NULL;
@ -5243,7 +5250,7 @@ int sym_queue_scsiio(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *
/*
* message
*/
cp->phys.smsg.addr = cpu_to_scr(CCB_BA(cp, scsi_smsg));
cp->phys.smsg.addr = CCB_BA(cp, scsi_smsg);
cp->phys.smsg.size = cpu_to_scr(msglen);
/*
@ -5343,7 +5350,7 @@ int sym_abort_scsiio(struct sym_hcb *np, struct scsi_cmnd *cmd, int timed_out)
}
/*
* Complete execution of a SCSI command with extented
* Complete execution of a SCSI command with extended
* error, SCSI status error, or having been auto-sensed.
*
* The SCRIPTS processor is not running there, so we
@ -5441,7 +5448,7 @@ if (resid)
/*
* Let's requeue it to device.
*/
sym_set_cam_status(cmd, CAM_REQUEUE_REQ);
sym_set_cam_status(cmd, DID_SOFT_ERROR);
goto finish;
}
weirdness:

22
drivers/scsi/sym53c8xx_2/sym_hipd.h
View File

@ -444,7 +444,7 @@ struct sym_tcb {
*/
u_char usrflags;
u_short usrtags;
struct scsi_device *sdev;
struct scsi_target *starget;
};
/*
@ -754,10 +754,8 @@ struct sym_ccb {
int segments; /* Number of SG segments */
u8 order; /* Tag type (if tagged command) */
unsigned char odd_byte_adjustment; /* odd-sized req on wide bus */
/*
* Miscellaneous status'.
*/
u_char nego_status; /* Negotiation status */
u_char xerr_status; /* Extended error flags */
u32 extra_bytes; /* Extraneous bytes transferred */
@ -809,7 +807,7 @@ struct sym_ccb {
#endif
};
#define CCB_BA(cp,lbl) (cp->ccb_ba + offsetof(struct sym_ccb, lbl))
#define CCB_BA(cp,lbl) cpu_to_scr(cp->ccb_ba + offsetof(struct sym_ccb, lbl))
#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
#define sym_goalp(cp) ((cp->host_flags & HF_DATA_IN) ? cp->goalp : cp->wgoalp)
@ -1138,33 +1136,33 @@ static inline void sym_setup_data_pointers(struct sym_hcb *np,
* No segments means no data.
*/
if (!cp->segments)
dir = CAM_DIR_NONE;
dir = DMA_NONE;
/*
* Set the data pointer.
*/
switch(dir) {
#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
case CAM_DIR_UNKNOWN:
case DMA_BIDIRECTIONAL:
#endif
case CAM_DIR_OUT:
case DMA_TO_DEVICE:
goalp = SCRIPTA_BA(np, data_out2) + 8;
lastp = goalp - 8 - (cp->segments * (2*4));
#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
cp->wgoalp = cpu_to_scr(goalp);
if (dir != CAM_DIR_UNKNOWN)
if (dir != DMA_BIDIRECTIONAL)
break;
cp->phys.head.wlastp = cpu_to_scr(lastp);
/* fall through */
#else
break;
#endif
case CAM_DIR_IN:
case DMA_FROM_DEVICE:
cp->host_flags |= HF_DATA_IN;
goalp = SCRIPTA_BA(np, data_in2) + 8;
lastp = goalp - 8 - (cp->segments * (2*4));
break;
case CAM_DIR_NONE:
case DMA_NONE:
default:
#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
cp->host_flags |= HF_DATA_IN;
@ -1185,7 +1183,7 @@ static inline void sym_setup_data_pointers(struct sym_hcb *np,
/*
* If direction is unknown, start at data_io.
*/
if (dir == CAM_DIR_UNKNOWN)
if (dir == DMA_BIDIRECTIONAL)
cp->phys.head.savep = cpu_to_scr(SCRIPTB_BA(np, data_io));
#endif
}

7
drivers/scsi/sym53c8xx_2/sym_nvram.c
View File

@ -270,6 +270,7 @@ static void S24C16_set_bit(struct sym_device *np, u_char write_bit, u_char *gpre
}
OUTB(np, nc_gpreg, *gpreg);
INB(np, nc_mbox1);
udelay(5);
}
@ -547,6 +548,7 @@ static int sym_read_Symbios_nvram(struct sym_device *np, Symbios_nvram *nvram)
static void T93C46_Clk(struct sym_device *np, u_char *gpreg)
{
OUTB(np, nc_gpreg, *gpreg | 0x04);
INB(np, nc_mbox1);
udelay(2);
OUTB(np, nc_gpreg, *gpreg);
}
@ -574,6 +576,7 @@ static void T93C46_Write_Bit(struct sym_device *np, u_char write_bit, u_char *gp
*gpreg |= 0x10;
OUTB(np, nc_gpreg, *gpreg);
INB(np, nc_mbox1);
udelay(2);
T93C46_Clk(np, gpreg);
@ -586,6 +589,7 @@ static void T93C46_Stop(struct sym_device *np, u_char *gpreg)
{
*gpreg &= 0xef;
OUTB(np, nc_gpreg, *gpreg);
INB(np, nc_mbox1);
udelay(2);
T93C46_Clk(np, gpreg);
@ -733,7 +737,8 @@ static int sym_read_parisc_pdc(struct sym_device *np, struct pdc_initiator *pdc)
return SYM_PARISC_PDC;
}
#else
static int sym_read_parisc_pdc(struct sym_device *np, struct pdc_initiator *x)
static inline int sym_read_parisc_pdc(struct sym_device *np,
struct pdc_initiator *x)
{
return 0;
}