mirror of https://gitee.com/openkylin/linux.git
Merge branch 'reset/arc' into reset/next
Merge the AXS10x driver, which is also merged into git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc.git for-next
This commit is contained in:
commit
542befbb18
|
@ -0,0 +1,33 @@
|
|||
Binding for the AXS10x reset controller
|
||||
|
||||
This binding describes the ARC AXS10x boards custom IP-block which allows
|
||||
to control reset signals of selected peripherals. For example DW GMAC, etc...
|
||||
This block is controlled via memory-mapped register (AKA CREG) which
|
||||
represents up-to 32 reset lines.
|
||||
|
||||
As of today only the following lines are used:
|
||||
- DW GMAC - line 5
|
||||
|
||||
This binding uses the common reset binding[1].
|
||||
|
||||
[1] Documentation/devicetree/bindings/reset/reset.txt
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "snps,axs10x-reset".
|
||||
- reg: should always contain pair address - length: for creg reset
|
||||
bits register.
|
||||
- #reset-cells: from common reset binding; Should always be set to 1.
|
||||
|
||||
Example:
|
||||
reset: reset-controller@11220 {
|
||||
compatible = "snps,axs10x-reset";
|
||||
#reset-cells = <1>;
|
||||
reg = <0x11220 0x4>;
|
||||
};
|
||||
|
||||
Specifying reset lines connected to IP modules:
|
||||
ethernet@.... {
|
||||
....
|
||||
resets = <&reset 5>;
|
||||
....
|
||||
};
|
|
@ -12882,6 +12882,12 @@ F: arch/arc/plat-axs10x
|
|||
F: arch/arc/boot/dts/ax*
|
||||
F: Documentation/devicetree/bindings/arc/axs10*
|
||||
|
||||
SYNOPSYS AXS10x RESET CONTROLLER DRIVER
|
||||
M: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
|
||||
S: Supported
|
||||
F: drivers/reset/reset-axs10x.c
|
||||
F: Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt
|
||||
|
||||
SYNOPSYS DESIGNWARE DMAC DRIVER
|
||||
M: Viresh Kumar <vireshk@kernel.org>
|
||||
M: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
||||
|
|
|
@ -28,6 +28,12 @@ config RESET_ATH79
|
|||
This enables the ATH79 reset controller driver that supports the
|
||||
AR71xx SoC reset controller.
|
||||
|
||||
config RESET_AXS10X
|
||||
bool "AXS10x Reset Driver" if COMPILE_TEST
|
||||
default ARC_PLAT_AXS10X
|
||||
help
|
||||
This enables the reset controller driver for AXS10x.
|
||||
|
||||
config RESET_BERLIN
|
||||
bool "Berlin Reset Driver" if COMPILE_TEST
|
||||
default ARCH_BERLIN
|
||||
|
|
|
@ -4,6 +4,7 @@ obj-$(CONFIG_ARCH_STI) += sti/
|
|||
obj-$(CONFIG_ARCH_TEGRA) += tegra/
|
||||
obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o
|
||||
obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
|
||||
obj-$(CONFIG_RESET_AXS10X) += reset-axs10x.o
|
||||
obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
|
||||
obj-$(CONFIG_RESET_HSDK) += reset-hsdk.o
|
||||
obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
|
||||
|
|
|
@ -0,0 +1,83 @@
|
|||
/*
|
||||
* Copyright (C) 2017 Synopsys.
|
||||
*
|
||||
* Synopsys AXS10x reset driver.
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include <linux/io.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/reset-controller.h>
|
||||
|
||||
#define to_axs10x_rst(p) container_of((p), struct axs10x_rst, rcdev)
|
||||
|
||||
#define AXS10X_MAX_RESETS 32
|
||||
|
||||
struct axs10x_rst {
|
||||
void __iomem *regs_rst;
|
||||
spinlock_t lock;
|
||||
struct reset_controller_dev rcdev;
|
||||
};
|
||||
|
||||
static int axs10x_reset_reset(struct reset_controller_dev *rcdev,
|
||||
unsigned long id)
|
||||
{
|
||||
struct axs10x_rst *rst = to_axs10x_rst(rcdev);
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&rst->lock, flags);
|
||||
writel(BIT(id), rst->regs_rst);
|
||||
spin_unlock_irqrestore(&rst->lock, flags);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct reset_control_ops axs10x_reset_ops = {
|
||||
.reset = axs10x_reset_reset,
|
||||
};
|
||||
|
||||
static int axs10x_reset_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct axs10x_rst *rst;
|
||||
struct resource *mem;
|
||||
|
||||
rst = devm_kzalloc(&pdev->dev, sizeof(*rst), GFP_KERNEL);
|
||||
if (!rst)
|
||||
return -ENOMEM;
|
||||
|
||||
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
rst->regs_rst = devm_ioremap_resource(&pdev->dev, mem);
|
||||
if (IS_ERR(rst->regs_rst))
|
||||
return PTR_ERR(rst->regs_rst);
|
||||
|
||||
spin_lock_init(&rst->lock);
|
||||
|
||||
rst->rcdev.owner = THIS_MODULE;
|
||||
rst->rcdev.ops = &axs10x_reset_ops;
|
||||
rst->rcdev.of_node = pdev->dev.of_node;
|
||||
rst->rcdev.nr_resets = AXS10X_MAX_RESETS;
|
||||
|
||||
return devm_reset_controller_register(&pdev->dev, &rst->rcdev);
|
||||
}
|
||||
|
||||
static const struct of_device_id axs10x_reset_dt_match[] = {
|
||||
{ .compatible = "snps,axs10x-reset" },
|
||||
{ },
|
||||
};
|
||||
|
||||
static struct platform_driver axs10x_reset_driver = {
|
||||
.probe = axs10x_reset_probe,
|
||||
.driver = {
|
||||
.name = "axs10x-reset",
|
||||
.of_match_table = axs10x_reset_dt_match,
|
||||
},
|
||||
};
|
||||
builtin_platform_driver(axs10x_reset_driver);
|
||||
|
||||
MODULE_AUTHOR("Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>");
|
||||
MODULE_DESCRIPTION("Synopsys AXS10x reset driver");
|
||||
MODULE_LICENSE("GPL v2");
|
Loading…
Reference in New Issue