mirror of https://gitee.com/openkylin/linux.git
fpga manager: Add altera-ps-spi driver for Altera FPGAs
altera-ps-spi loads FPGA firmware over SPI, using the "passive serial" interface on Altera Arria 10, Cyclone V or Stratix V FPGAs. This is one of the simpler ways to set up an FPGA at runtime. The signal interface is close to unidirectional SPI with lsb first. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Joshua Clayton
Greg Kroah-Hartman
parent
f2b56452c4
commit
5692fae074
|
|
@ -24,6 +24,13 @@ config FPGA_MGR_ICE40_SPI
|
|||
help
|
||||
FPGA manager driver support for Lattice iCE40 FPGAs over SPI.
|
||||
|
||||
config FPGA_MGR_ALTERA_PS_SPI
|
||||
tristate "Altera FPGA Passive Serial over SPI"
|
||||
depends on SPI
|
||||
help
|
||||
FPGA manager driver support for Altera Arria/Cyclone/Stratix
|
||||
using the passive serial interface over SPI.
|
||||
|
||||
config FPGA_MGR_SOCFPGA
|
||||
tristate "Altera SOCFPGA FPGA Manager"
|
||||
depends on ARCH_SOCFPGA || COMPILE_TEST
|
||||
|
|
|
|||
|
|
@ -6,6 +6,7 @@
|
|||
obj-$(CONFIG_FPGA) += fpga-mgr.o
|
||||
|
||||
# FPGA Manager Drivers
|
||||
obj-$(CONFIG_FPGA_MGR_ALTERA_PS_SPI) += altera-ps-spi.o
|
||||
obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o
|
||||
obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o
|
||||
obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,297 @@
|
|||
/*
|
||||
* Altera Passive Serial SPI Driver
|
||||
*
|
||||
* Copyright (c) 2017 United Western Technologies, Corporation
|
||||
*
|
||||
* Joshua Clayton <stillcompiling@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms and conditions of the GNU General Public License,
|
||||
* version 2, as published by the Free Software Foundation.
|
||||
*
|
||||
* Manage Altera FPGA firmware that is loaded over SPI using the passive
|
||||
* serial configuration method.
|
||||
* Firmware must be in binary "rbf" format.
|
||||
* Works on Arria 10, Cyclone V and Stratix V. Should work on Cyclone series.
|
||||
* May work on other Altera FPGAs.
|
||||
*/
|
||||
|
||||
#include <linux/bitrev.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/fpga/fpga-mgr.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/sizes.h>
|
||||
|
||||
enum altera_ps_devtype {
|
||||
CYCLONE5,
|
||||
ARRIA10,
|
||||
};
|
||||
|
||||
struct altera_ps_data {
|
||||
enum altera_ps_devtype devtype;
|
||||
int status_wait_min_us;
|
||||
int status_wait_max_us;
|
||||
int t_cfg_us;
|
||||
int t_st2ck_us;
|
||||
};
|
||||
|
||||
struct altera_ps_conf {
|
||||
struct gpio_desc *config;
|
||||
struct gpio_desc *confd;
|
||||
struct gpio_desc *status;
|
||||
struct spi_device *spi;
|
||||
const struct altera_ps_data *data;
|
||||
u32 info_flags;
|
||||
char mgr_name[64];
|
||||
};
|
||||
|
||||
/* | Arria 10 | Cyclone5 | Stratix5 |
|
||||
* t_CF2ST0 | [; 600] | [; 600] | [; 600] |ns
|
||||
* t_CFG | [2;] | [2;] | [2;] |µs
|
||||
* t_STATUS | [268; 3000] | [268; 1506] | [268; 1506] |µs
|
||||
* t_CF2ST1 | [; 3000] | [; 1506] | [; 1506] |µs
|
||||
* t_CF2CK | [3010;] | [1506;] | [1506;] |µs
|
||||
* t_ST2CK | [10;] | [2;] | [2;] |µs
|
||||
* t_CD2UM | [175; 830] | [175; 437] | [175; 437] |µs
|
||||
*/
|
||||
static struct altera_ps_data c5_data = {
|
||||
/* these values for Cyclone5 are compatible with Stratix5 */
|
||||
.devtype = CYCLONE5,
|
||||
.status_wait_min_us = 268,
|
||||
.status_wait_max_us = 1506,
|
||||
.t_cfg_us = 2,
|
||||
.t_st2ck_us = 2,
|
||||
};
|
||||
|
||||
static struct altera_ps_data a10_data = {
|
||||
.devtype = ARRIA10,
|
||||
.status_wait_min_us = 268, /* min(t_STATUS) */
|
||||
.status_wait_max_us = 3000, /* max(t_CF2ST1) */
|
||||
.t_cfg_us = 2, /* max { min(t_CFG), max(tCF2ST0) } */
|
||||
.t_st2ck_us = 10, /* min(t_ST2CK) */
|
||||
};
|
||||
|
||||
static const struct of_device_id of_ef_match[] = {
|
||||
{ .compatible = "altr,fpga-passive-serial", .data = &c5_data },
|
||||
{ .compatible = "altr,fpga-arria10-passive-serial", .data = &a10_data },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, of_ef_match);
|
||||
|
||||
static enum fpga_mgr_states altera_ps_state(struct fpga_manager *mgr)
|
||||
{
|
||||
struct altera_ps_conf *conf = mgr->priv;
|
||||
|
||||
if (gpiod_get_value_cansleep(conf->status))
|
||||
return FPGA_MGR_STATE_RESET;
|
||||
|
||||
return FPGA_MGR_STATE_UNKNOWN;
|
||||
}
|
||||
|
||||
static inline void altera_ps_delay(int delay_us)
|
||||
{
|
||||
if (delay_us > 10)
|
||||
usleep_range(delay_us, delay_us + 5);
|
||||
else
|
||||
udelay(delay_us);
|
||||
}
|
||||
|
||||
static int altera_ps_write_init(struct fpga_manager *mgr,
|
||||
struct fpga_image_info *info,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
struct altera_ps_conf *conf = mgr->priv;
|
||||
int min, max, waits;
|
||||
int i;
|
||||
|
||||
conf->info_flags = info->flags;
|
||||
|
||||
if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
|
||||
dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
gpiod_set_value_cansleep(conf->config, 1);
|
||||
|
||||
/* wait min reset pulse time */
|
||||
altera_ps_delay(conf->data->t_cfg_us);
|
||||
|
||||
if (!gpiod_get_value_cansleep(conf->status)) {
|
||||
dev_err(&mgr->dev, "Status pin failed to show a reset\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
gpiod_set_value_cansleep(conf->config, 0);
|
||||
|
||||
min = conf->data->status_wait_min_us;
|
||||
max = conf->data->status_wait_max_us;
|
||||
waits = max / min;
|
||||
if (max % min)
|
||||
waits++;
|
||||
|
||||
/* wait for max { max(t_STATUS), max(t_CF2ST1) } */
|
||||
for (i = 0; i < waits; i++) {
|
||||
usleep_range(min, min + 10);
|
||||
if (!gpiod_get_value_cansleep(conf->status)) {
|
||||
/* wait for min(t_ST2CK)*/
|
||||
altera_ps_delay(conf->data->t_st2ck_us);
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
dev_err(&mgr->dev, "Status pin not ready.\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
static void rev_buf(char *buf, size_t len)
|
||||
{
|
||||
const char *fw_end = (buf + len);
|
||||
|
||||
/* set buffer to lsb first */
|
||||
while (buf < fw_end) {
|
||||
*buf = bitrev8(*buf);
|
||||
buf++;
|
||||
}
|
||||
}
|
||||
|
||||
static int altera_ps_write(struct fpga_manager *mgr, const char *buf,
|
||||
size_t count)
|
||||
{
|
||||
struct altera_ps_conf *conf = mgr->priv;
|
||||
const char *fw_data = buf;
|
||||
const char *fw_data_end = fw_data + count;
|
||||
|
||||
while (fw_data < fw_data_end) {
|
||||
int ret;
|
||||
size_t stride = min_t(size_t, fw_data_end - fw_data, SZ_4K);
|
||||
|
||||
if (!(conf->info_flags & FPGA_MGR_BITSTREAM_LSB_FIRST))
|
||||
rev_buf((char *)fw_data, stride);
|
||||
|
||||
ret = spi_write(conf->spi, fw_data, stride);
|
||||
if (ret) {
|
||||
dev_err(&mgr->dev, "spi error in firmware write: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
fw_data += stride;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int altera_ps_write_complete(struct fpga_manager *mgr,
|
||||
struct fpga_image_info *info)
|
||||
{
|
||||
struct altera_ps_conf *conf = mgr->priv;
|
||||
const char dummy[] = {0};
|
||||
int ret;
|
||||
|
||||
if (gpiod_get_value_cansleep(conf->status)) {
|
||||
dev_err(&mgr->dev, "Error during configuration.\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
if (!IS_ERR(conf->confd)) {
|
||||
if (!gpiod_get_raw_value_cansleep(conf->confd)) {
|
||||
dev_err(&mgr->dev, "CONF_DONE is inactive!\n");
|
||||
return -EIO;
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* After CONF_DONE goes high, send two additional falling edges on DCLK
|
||||
* to begin initialization and enter user mode
|
||||
*/
|
||||
ret = spi_write(conf->spi, dummy, 1);
|
||||
if (ret) {
|
||||
dev_err(&mgr->dev, "spi error during end sequence: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct fpga_manager_ops altera_ps_ops = {
|
||||
.state = altera_ps_state,
|
||||
.write_init = altera_ps_write_init,
|
||||
.write = altera_ps_write,
|
||||
.write_complete = altera_ps_write_complete,
|
||||
};
|
||||
|
||||
static int altera_ps_probe(struct spi_device *spi)
|
||||
{
|
||||
struct altera_ps_conf *conf;
|
||||
const struct of_device_id *of_id;
|
||||
|
||||
conf = devm_kzalloc(&spi->dev, sizeof(*conf), GFP_KERNEL);
|
||||
if (!conf)
|
||||
return -ENOMEM;
|
||||
|
||||
of_id = of_match_device(of_ef_match, &spi->dev);
|
||||
if (!of_id)
|
||||
return -ENODEV;
|
||||
|
||||
conf->data = of_id->data;
|
||||
conf->spi = spi;
|
||||
conf->config = devm_gpiod_get(&spi->dev, "nconfig", GPIOD_OUT_HIGH);
|
||||
if (IS_ERR(conf->config)) {
|
||||
dev_err(&spi->dev, "Failed to get config gpio: %ld\n",
|
||||
PTR_ERR(conf->config));
|
||||
return PTR_ERR(conf->config);
|
||||
}
|
||||
|
||||
conf->status = devm_gpiod_get(&spi->dev, "nstat", GPIOD_IN);
|
||||
if (IS_ERR(conf->status)) {
|
||||
dev_err(&spi->dev, "Failed to get status gpio: %ld\n",
|
||||
PTR_ERR(conf->status));
|
||||
return PTR_ERR(conf->status);
|
||||
}
|
||||
|
||||
conf->confd = devm_gpiod_get(&spi->dev, "confd", GPIOD_IN);
|
||||
if (IS_ERR(conf->confd)) {
|
||||
dev_warn(&spi->dev, "Not using confd gpio: %ld\n",
|
||||
PTR_ERR(conf->confd));
|
||||
}
|
||||
|
||||
/* Register manager with unique name */
|
||||
snprintf(conf->mgr_name, sizeof(conf->mgr_name), "%s %s",
|
||||
dev_driver_string(&spi->dev), dev_name(&spi->dev));
|
||||
|
||||
return fpga_mgr_register(&spi->dev, conf->mgr_name,
|
||||
&altera_ps_ops, conf);
|
||||
}
|
||||
|
||||
static int altera_ps_remove(struct spi_device *spi)
|
||||
{
|
||||
fpga_mgr_unregister(&spi->dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct spi_device_id altera_ps_spi_ids[] = {
|
||||
{"cyclone-ps-spi", 0},
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(spi, altera_ps_spi_ids);
|
||||
|
||||
static struct spi_driver altera_ps_driver = {
|
||||
.driver = {
|
||||
.name = "altera-ps-spi",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = of_match_ptr(of_ef_match),
|
||||
},
|
||||
.id_table = altera_ps_spi_ids,
|
||||
.probe = altera_ps_probe,
|
||||
.remove = altera_ps_remove,
|
||||
};
|
||||
|
||||
module_spi_driver(altera_ps_driver)
|
||||
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_AUTHOR("Joshua Clayton <stillcompiling@gmail.com>");
|
||||
MODULE_DESCRIPTION("Module to load Altera FPGA firmware over SPI");
|
||||
Loading…
Reference in New Issue