mfd: rtsx: Fix PM suspend for 5227 & 5249

Fix rts5227&5249 failed send buffer cmd after suspend,
PM_CTRL3 should reset before send any buffer cmd after suspend.
Otherwise, buffer cmd will failed, this will lead resume fail.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

drivers/mfd/Makefile

@@ -13,7 +13,7 @@ obj-$(CONFIG_MFD_CROS_EC)	+= cros_ec.o
 obj-$(CONFIG_MFD_CROS_EC_I2C)	+= cros_ec_i2c.o
 obj-$(CONFIG_MFD_CROS_EC_SPI)	+= cros_ec_spi.o
 
-rtsx_pci-objs			:= rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o
+rtsx_pci-objs			:= rtsx_pcr.o rtsx_gops.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o
 obj-$(CONFIG_MFD_RTSX_PCI)	+= rtsx_pci.o
 obj-$(CONFIG_MFD_RTSX_USB)	+= rtsx_usb.o
 

drivers/mfd/rts5227.c

@@ -130,6 +130,12 @@ static int rts5227_extra_init_hw(struct rtsx_pcr *pcr)
 
 static int rts5227_optimize_phy(struct rtsx_pcr *pcr)
 {
+	int err;
+
+	err = rtsx_gops_pm_reset(pcr);
+	if (err < 0)
+		return err;
+
 	/* Optimize RX sensitivity */
 	return rtsx_pci_write_phy_register(pcr, 0x00, 0xBA42);
 }

drivers/mfd/rts5249.c

@@ -130,6 +130,10 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
 {
 	int err;
 
+	err = rtsx_gops_pm_reset(pcr);
+	if (err < 0)
+		return err;
+
 	err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV,
 			PHY_REG_REV_RESV | PHY_REG_REV_RXIDLE_LATCHED |
 			PHY_REG_REV_P1_EN | PHY_REG_REV_RXIDLE_EN |

drivers/mfd/rtsx_gops.c

@@ -0,0 +1,37 @@
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Micky Ching <micky_ching@realsil.com.cn>
+ */
+
+#include <linux/mfd/rtsx_pci.h>
+#include "rtsx_pcr.h"
+
+int rtsx_gops_pm_reset(struct rtsx_pcr *pcr)
+{
+	int err;
+
+	/* init aspm */
+	rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, 0xFF, 0x00);
+	err = rtsx_pci_update_cfg_byte(pcr, LCTLR, ~LCTLR_ASPM_CTL_MASK, 0x00);
+	if (err < 0)
+		return err;
+
+	/* reset PM_CTRL3 before send buffer cmd */
+	return rtsx_pci_write_register(pcr, PM_CTRL3, D3_DELINK_MODE_EN, 0x00);
+}

drivers/mfd/rtsx_pcr.h

@@ -72,4 +72,7 @@ do {									\
 	pcr->ms_pull_ctl_disable_tbl = __device##_ms_pull_ctl_disable_tbl; \
 } while (0)
 
+/* generic operations */
+int rtsx_gops_pm_reset(struct rtsx_pcr *pcr);
+
 #endif

include/linux/mfd/rtsx_pci.h

@@ -707,6 +707,14 @@
 #define PM_CTRL1			0xFF44
 #define PM_CTRL2			0xFF45
 #define PM_CTRL3			0xFF46
+#define   SDIO_SEND_PME_EN		0x80
+#define   FORCE_RC_MODE_ON		0x40
+#define   FORCE_RX50_LINK_ON		0x20
+#define   D3_DELINK_MODE_EN		0x10
+#define   USE_PESRTB_CTL_DELINK		0x08
+#define   DELAY_PIN_WAKE		0x04
+#define   RESET_PIN_WAKE		0x02
+#define   PM_WAKE_EN			0x01
 #define PM_CTRL4			0xFF47
 
 /* Memory mapping */
@@ -752,6 +760,14 @@
 #define PHY_DUM_REG			0x1F
 
 #define LCTLR				0x80
+#define   LCTLR_EXT_SYNC		0x80
+#define   LCTLR_COMMON_CLOCK_CFG	0x40
+#define   LCTLR_RETRAIN_LINK		0x20
+#define   LCTLR_LINK_DISABLE		0x10
+#define   LCTLR_RCB			0x08
+#define   LCTLR_RESERVED		0x04
+#define   LCTLR_ASPM_CTL_MASK		0x03
+
 #define PCR_SETTING_REG1		0x724
 #define PCR_SETTING_REG2		0x814
 #define PCR_SETTING_REG3		0x747
@@ -967,4 +983,16 @@ static inline u8 *rtsx_pci_get_cmd_data(struct rtsx_pcr *pcr)
 	return (u8 *)(pcr->host_cmds_ptr);
 }
 
+static inline int rtsx_pci_update_cfg_byte(struct rtsx_pcr *pcr, int addr,
+		u8 mask, u8 append)
+{
+	int err;
+	u8 val;
+
+	err = pci_read_config_byte(pcr->pci, addr, &val);
+	if (err < 0)
+		return err;
+	return pci_write_config_byte(pcr->pci, addr, (val & mask) | append);
+}
+
 #endif