From 619053220a7d5620d26d60d1848ca9c681bea830 Mon Sep 17 00:00:00 2001 From: "james qian wang (Arm Technology China)" Date: Wed, 5 Jun 2019 11:35:45 +0100 Subject: [PATCH] dt/bindings: drm/komeda: Unify mclk/pclk/pipeline->aclk to one ACLK Current komeda driver uses three dedicated clks for a specific purpose: - mclk: main engine clock - pclk: APB clock - pipeline->aclk: AXI clock. But per spec the komeda HW only has three input clks: - ACLK: used for AXI masters, APB slave and most pipeline processing - PXCLK for pipeline 0: output pixel clock for pipeline 0 - PXCLK for pipeline 1: output pixel clock for pipeline 1 So one ACLK is enough, no need to split it to three mclk/pclk/axiclk. Signed-off-by: James Qian Wang (Arm Technology China) Signed-off-by: Liviu Dudau --- .../devicetree/bindings/display/arm,komeda.txt | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/display/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm,komeda.txt index b12c0453a421..8513695ee47f 100644 --- a/Documentation/devicetree/bindings/display/arm,komeda.txt +++ b/Documentation/devicetree/bindings/display/arm,komeda.txt @@ -7,8 +7,7 @@ Required properties: - clocks: A list of phandle + clock-specifier pairs, one for each entry in 'clock-names' - clock-names: A list of clock names. It should contain: - - "mclk": for the main processor clock - - "pclk": for the APB interface clock + - "aclk": for the main processor clock - #address-cells: Must be 1 - #size-cells: Must be 0 - iommus: configure the stream id to IOMMU, Must be configured if want to @@ -24,7 +23,6 @@ pipeline node should provide properties: in 'clock-names' - clock-names: should contain: - "pxclk": pixel clock - - "aclk": AXI interface clock - port: each pipeline connect to an encoder input port. The connection is modeled using the OF graph bindings specified in @@ -46,15 +44,15 @@ Example: compatible = "arm,mali-d71"; reg = <0xc00000 0x20000>; interrupts = <0 168 4>; - clocks = <&dpu_mclk>, <&dpu_aclk>; - clock-names = "mclk", "pclk"; + clocks = <&dpu_aclk>; + clock-names = "aclk"; iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>, <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>, <&smmu 8>, <&smmu 9>; dp0_pipe0: pipeline@0 { - clocks = <&fpgaosc2>, <&dpu_aclk>; - clock-names = "pxclk", "aclk"; + clocks = <&fpgaosc2>; + clock-names = "pxclk"; reg = <0>; port { @@ -65,8 +63,8 @@ Example: }; dp0_pipe1: pipeline@1 { - clocks = <&fpgaosc2>, <&dpu_aclk>; - clock-names = "pxclk", "aclk"; + clocks = <&fpgaosc2>; + clock-names = "pxclk"; reg = <1>; port {