mirror of https://gitee.com/openkylin/linux.git
hsu: add a periodic timer to check dma rx channel
A general problem for uart rx dma channel is you never know when and how much data will be received, so usually preset it a DMA descriptor with a big size, and rely on DMA RX timeout IRQ to know there is some data in rx channel. For a RX data size of multiple of MOTSR, there will be no timeout IRQ issued, thus OS will never be notified about that. This is a work around for that, current timer frequency is 5 times per second, it should vary according to the baud rate When future silicon version fix the problem, this workaround need be removed Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
parent
d843fc6e9d
commit
669b7a0938
|
@ -64,6 +64,8 @@
|
|||
#define mfd_readl(obj, offset) readl(obj->reg + offset)
|
||||
#define mfd_writel(obj, offset, val) writel(val, obj->reg + offset)
|
||||
|
||||
#define HSU_DMA_TIMEOUT_CHECK_FREQ (HZ/10)
|
||||
|
||||
struct hsu_dma_buffer {
|
||||
u8 *buf;
|
||||
dma_addr_t dma_addr;
|
||||
|
@ -75,7 +77,8 @@ struct hsu_dma_chan {
|
|||
u32 id;
|
||||
u32 dirt; /* to or from device */
|
||||
struct uart_hsu_port *uport;
|
||||
void __iomem *reg;
|
||||
void __iomem *reg;
|
||||
struct timer_list rx_timer; /* only needed by RX channel */
|
||||
};
|
||||
|
||||
struct uart_hsu_port {
|
||||
|
@ -377,6 +380,8 @@ void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf
|
|||
| (0x1 << 24) /* timeout bit, see HSU Errata 1 */
|
||||
);
|
||||
chan_writel(rxc, HSU_CH_CR, 0x3);
|
||||
|
||||
mod_timer(&rxc->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ);
|
||||
}
|
||||
|
||||
/* Protected by spin_lock_irqsave(port->lock) */
|
||||
|
@ -437,8 +442,13 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
|
|||
/* We can use 2 ways to calc the actual transfer len */
|
||||
count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr;
|
||||
|
||||
if (!count)
|
||||
if (!count) {
|
||||
/* restart the channel before we leave */
|
||||
chan_writel(chan, HSU_CH_CR, 0x3);
|
||||
return;
|
||||
}
|
||||
|
||||
del_timer(&chan->rx_timer);
|
||||
|
||||
dma_sync_single_for_cpu(port->dev, dbuf->dma_addr,
|
||||
dbuf->dma_size, DMA_FROM_DEVICE);
|
||||
|
@ -463,9 +473,12 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
|
|||
| (0x1 << 16)
|
||||
| (0x1 << 24) /* timeout bit, see HSU Errata 1 */
|
||||
);
|
||||
chan_writel(chan, HSU_CH_CR, 0x3);
|
||||
|
||||
tty_flip_buffer_push(tty);
|
||||
|
||||
chan_writel(chan, HSU_CH_CR, 0x3);
|
||||
chan->rx_timer.expires = jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ;
|
||||
add_timer(&chan->rx_timer);
|
||||
|
||||
}
|
||||
|
||||
static void serial_hsu_stop_rx(struct uart_port *port)
|
||||
|
@ -893,6 +906,8 @@ static void serial_hsu_shutdown(struct uart_port *port)
|
|||
container_of(port, struct uart_hsu_port, port);
|
||||
unsigned long flags;
|
||||
|
||||
del_timer_sync(&up->rxc->rx_timer);
|
||||
|
||||
/* Disable interrupts from this port */
|
||||
up->ier = 0;
|
||||
serial_out(up, UART_IER, 0);
|
||||
|
@ -1348,6 +1363,28 @@ static int serial_hsu_probe(struct pci_dev *pdev,
|
|||
return ret;
|
||||
}
|
||||
|
||||
static void hsu_dma_rx_timeout(unsigned long data)
|
||||
{
|
||||
struct hsu_dma_chan *chan = (void *)data;
|
||||
struct uart_hsu_port *up = chan->uport;
|
||||
struct hsu_dma_buffer *dbuf = &up->rxbuf;
|
||||
int count = 0;
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&up->port.lock, flags);
|
||||
|
||||
count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr;
|
||||
|
||||
if (!count) {
|
||||
mod_timer(&chan->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ);
|
||||
goto exit;
|
||||
}
|
||||
|
||||
hsu_dma_rx(up, 0);
|
||||
exit:
|
||||
spin_unlock_irqrestore(&up->port.lock, flags);
|
||||
}
|
||||
|
||||
static void hsu_global_init(void)
|
||||
{
|
||||
struct hsu_port *hsu;
|
||||
|
@ -1409,6 +1446,13 @@ static void hsu_global_init(void)
|
|||
dchan->uport = &hsu->port[i/2];
|
||||
dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET +
|
||||
i * HSU_DMA_CHANS_REG_LENGTH;
|
||||
|
||||
/* Work around for RX */
|
||||
if (dchan->dirt == DMA_FROM_DEVICE) {
|
||||
init_timer(&dchan->rx_timer);
|
||||
dchan->rx_timer.function = hsu_dma_rx_timeout;
|
||||
dchan->rx_timer.data = (unsigned long)dchan;
|
||||
}
|
||||
dchan++;
|
||||
}
|
||||
|
||||
|
|
Loading…
Reference in New Issue