mirror of https://gitee.com/openkylin/linux.git
hwmon: (adm1275) Add support for ADM1293 and ADM1294
ADM1293 and ADM1294 are mostly compatible with other chips of the same series, but have more configuration options. There are also some differences in register details. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Guenter Roeck
parent
48065a138a
commit
68a4038236
|
|
@ -14,6 +14,10 @@ Supported chips:
|
|||
Prefix: 'adm1276'
|
||||
Addresses scanned: -
|
||||
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
|
||||
* Analog Devices ADM1293/ADM1294
|
||||
Prefix: 'adm1293', 'adm1294'
|
||||
Addresses scanned: -
|
||||
Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf
|
||||
|
||||
Author: Guenter Roeck <linux@roeck-us.net>
|
||||
|
||||
|
|
@ -22,12 +26,12 @@ Description
|
|||
-----------
|
||||
|
||||
This driver supports hardware montoring for Analog Devices ADM1075, ADM1275,
|
||||
and ADM1276 Hot-Swap Controller and Digital Power Monitor.
|
||||
ADM1276, ADM1293, and ADM1294 Hot-Swap Controller and Digital Power Monitors.
|
||||
|
||||
ADM1075, ADM1275, and ADM1276 are hot-swap controllers that allow a circuit
|
||||
board to be removed from or inserted into a live backplane. They also feature
|
||||
current and voltage readback via an integrated 12-bit analog-to-digital
|
||||
converter (ADC), accessed using a PMBus interface.
|
||||
ADM1075, ADM1275, ADM1276, ADM1293, and ADM1294 are hot-swap controllers that
|
||||
allow a circuit board to be removed from or inserted into a live backplane.
|
||||
They also feature current and voltage readback via an integrated 12
|
||||
bit analog-to-digital converter (ADC), accessed using a PMBus interface.
|
||||
|
||||
The driver is a client driver to the core PMBus driver. Please see
|
||||
Documentation/hwmon/pmbus for details on PMBus client drivers.
|
||||
|
|
@ -58,16 +62,16 @@ Sysfs entries
|
|||
The following attributes are supported. Limits are read-write, history reset
|
||||
attributes are write-only, all other attributes are read-only.
|
||||
|
||||
in1_label "vin1" or "vout1" depending on chip variant and
|
||||
configuration. On ADM1075, vout1 reports the voltage on
|
||||
the VAUX pin.
|
||||
in1_input Measured voltage.
|
||||
in1_min Minimum Voltage.
|
||||
in1_max Maximum voltage.
|
||||
in1_min_alarm Voltage low alarm.
|
||||
in1_max_alarm Voltage high alarm.
|
||||
in1_highest Historical maximum voltage.
|
||||
in1_reset_history Write any value to reset history.
|
||||
inX_label "vin1" or "vout1" depending on chip variant and
|
||||
configuration. On ADM1075, ADM1293, and ADM1294,
|
||||
vout1 reports the voltage on the VAUX pin.
|
||||
inX_input Measured voltage.
|
||||
inX_min Minimum Voltage.
|
||||
inX_max Maximum voltage.
|
||||
inX_min_alarm Voltage low alarm.
|
||||
inX_max_alarm Voltage high alarm.
|
||||
inX_highest Historical maximum voltage.
|
||||
inX_reset_history Write any value to reset history.
|
||||
|
||||
curr1_label "iout1"
|
||||
curr1_input Measured current.
|
||||
|
|
@ -86,7 +90,9 @@ curr1_reset_history Write any value to reset history.
|
|||
|
||||
power1_label "pin1"
|
||||
power1_input Input power.
|
||||
power1_input_lowest Lowest observed input power. ADM1293 and ADM1294 only.
|
||||
power1_input_highest Highest observed input power.
|
||||
power1_reset_history Write any value to reset history.
|
||||
|
||||
Power attributes are supported on ADM1075 and ADM1276
|
||||
only.
|
||||
Power attributes are supported on ADM1075, ADM1276,
|
||||
ADM1293, and ADM1294.
|
||||
|
|
|
|||
|
|
@ -30,8 +30,8 @@ config SENSORS_ADM1275
|
|||
default n
|
||||
help
|
||||
If you say yes here you get hardware monitoring support for Analog
|
||||
Devices ADM1075, ADM1275, and ADM1276 Hot-Swap Controller and Digital
|
||||
Power Monitors.
|
||||
Devices ADM1075, ADM1275, ADM1276, ADM1293, and ADM1294 Hot-Swap
|
||||
Controller and Digital Power Monitors.
|
||||
|
||||
This driver can also be built as a module. If so, the module will
|
||||
be called adm1275.
|
||||
|
|
|
|||
|
|
@ -24,7 +24,11 @@
|
|||
#include <linux/bitops.h>
|
||||
#include "pmbus.h"
|
||||
|
||||
enum chips { adm1075, adm1275, adm1276 };
|
||||
enum chips { adm1075, adm1275, adm1276, adm1293, adm1294 };
|
||||
|
||||
#define ADM1275_MFR_STATUS_IOUT_WARN2 BIT(0)
|
||||
#define ADM1293_MFR_STATUS_VAUX_UV_WARN BIT(5)
|
||||
#define ADM1293_MFR_STATUS_VAUX_OV_WARN BIT(6)
|
||||
|
||||
#define ADM1275_PEAK_IOUT 0xd0
|
||||
#define ADM1275_PEAK_VIN 0xd1
|
||||
|
|
@ -37,18 +41,30 @@ enum chips { adm1075, adm1275, adm1276 };
|
|||
#define ADM1075_IRANGE_25 BIT(3)
|
||||
#define ADM1075_IRANGE_MASK (BIT(3) | BIT(4))
|
||||
|
||||
#define ADM1293_IRANGE_25 0
|
||||
#define ADM1293_IRANGE_50 BIT(6)
|
||||
#define ADM1293_IRANGE_100 BIT(7)
|
||||
#define ADM1293_IRANGE_200 (BIT(6) | BIT(7))
|
||||
#define ADM1293_IRANGE_MASK (BIT(6) | BIT(7))
|
||||
|
||||
#define ADM1293_VIN_SEL_012 BIT(2)
|
||||
#define ADM1293_VIN_SEL_074 BIT(3)
|
||||
#define ADM1293_VIN_SEL_210 (BIT(2) | BIT(3))
|
||||
#define ADM1293_VIN_SEL_MASK (BIT(2) | BIT(3))
|
||||
|
||||
#define ADM1293_VAUX_EN BIT(1)
|
||||
|
||||
#define ADM1275_IOUT_WARN2_LIMIT 0xd7
|
||||
#define ADM1275_DEVICE_CONFIG 0xd8
|
||||
|
||||
#define ADM1275_IOUT_WARN2_SELECT BIT(4)
|
||||
|
||||
#define ADM1276_PEAK_PIN 0xda
|
||||
|
||||
#define ADM1275_MFR_STATUS_IOUT_WARN2 BIT(0)
|
||||
|
||||
#define ADM1075_READ_VAUX 0xdd
|
||||
#define ADM1075_VAUX_OV_WARN_LIMIT 0xde
|
||||
#define ADM1075_VAUX_UV_WARN_LIMIT 0xdf
|
||||
#define ADM1293_IOUT_MIN 0xe3
|
||||
#define ADM1293_PIN_MIN 0xe4
|
||||
#define ADM1075_VAUX_STATUS 0xf6
|
||||
|
||||
#define ADM1075_VAUX_OV_WARN BIT(7)
|
||||
|
|
@ -60,6 +76,9 @@ struct adm1275_data {
|
|||
bool have_uc_fault;
|
||||
bool have_vout;
|
||||
bool have_vaux_status;
|
||||
bool have_mfr_vaux_status;
|
||||
bool have_iout_min;
|
||||
bool have_pin_min;
|
||||
bool have_pin_max;
|
||||
struct pmbus_driver_info info;
|
||||
};
|
||||
|
|
@ -94,6 +113,28 @@ static const struct coefficients adm1276_coefficients[] = {
|
|||
[4] = { 2115, 0, -1 }, /* power, vrange not set */
|
||||
};
|
||||
|
||||
static const struct coefficients adm1293_coefficients[] = {
|
||||
[0] = { 3333, -1, 0 }, /* voltage, vrange 1.2V */
|
||||
[1] = { 5552, -5, -1 }, /* voltage, vrange 7.4V */
|
||||
[2] = { 19604, -50, -2 }, /* voltage, vrange 21V */
|
||||
[3] = { 8000, -100, -2 }, /* current, irange25 */
|
||||
[4] = { 4000, -100, -2 }, /* current, irange50 */
|
||||
[5] = { 20000, -1000, -3 }, /* current, irange100 */
|
||||
[6] = { 10000, -1000, -3 }, /* current, irange200 */
|
||||
[7] = { 10417, 0, -1 }, /* power, 1.2V, irange25 */
|
||||
[8] = { 5208, 0, -1 }, /* power, 1.2V, irange50 */
|
||||
[9] = { 26042, 0, -2 }, /* power, 1.2V, irange100 */
|
||||
[10] = { 13021, 0, -2 }, /* power, 1.2V, irange200 */
|
||||
[11] = { 17351, 0, -2 }, /* power, 7.4V, irange25 */
|
||||
[12] = { 8676, 0, -2 }, /* power, 7.4V, irange50 */
|
||||
[13] = { 4338, 0, -2 }, /* power, 7.4V, irange100 */
|
||||
[14] = { 21689, 0, -3 }, /* power, 7.4V, irange200 */
|
||||
[15] = { 6126, 0, -2 }, /* power, 21V, irange25 */
|
||||
[16] = { 30631, 0, -3 }, /* power, 21V, irange50 */
|
||||
[17] = { 15316, 0, -3 }, /* power, 21V, irange100 */
|
||||
[18] = { 7658, 0, -3 }, /* power, 21V, irange200 */
|
||||
};
|
||||
|
||||
static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
|
||||
{
|
||||
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
|
||||
|
|
@ -131,6 +172,11 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
|
|||
return -ENODATA;
|
||||
ret = pmbus_read_word_data(client, 0, ADM1075_READ_VAUX);
|
||||
break;
|
||||
case PMBUS_VIRT_READ_IOUT_MIN:
|
||||
if (!data->have_iout_min)
|
||||
return -ENXIO;
|
||||
ret = pmbus_read_word_data(client, 0, ADM1293_IOUT_MIN);
|
||||
break;
|
||||
case PMBUS_VIRT_READ_IOUT_MAX:
|
||||
ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_IOUT);
|
||||
break;
|
||||
|
|
@ -140,6 +186,11 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
|
|||
case PMBUS_VIRT_READ_VIN_MAX:
|
||||
ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VIN);
|
||||
break;
|
||||
case PMBUS_VIRT_READ_PIN_MIN:
|
||||
if (!data->have_pin_min)
|
||||
return -ENXIO;
|
||||
ret = pmbus_read_word_data(client, 0, ADM1293_PIN_MIN);
|
||||
break;
|
||||
case PMBUS_VIRT_READ_PIN_MAX:
|
||||
if (!data->have_pin_max)
|
||||
return -ENXIO;
|
||||
|
|
@ -163,6 +214,8 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
|
|||
static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
|
||||
u16 word)
|
||||
{
|
||||
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
|
||||
const struct adm1275_data *data = to_adm1275_data(info);
|
||||
int ret;
|
||||
|
||||
if (page)
|
||||
|
|
@ -176,6 +229,9 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
|
|||
break;
|
||||
case PMBUS_VIRT_RESET_IOUT_HISTORY:
|
||||
ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_IOUT, 0);
|
||||
if (!ret && data->have_iout_min)
|
||||
ret = pmbus_write_word_data(client, 0,
|
||||
ADM1293_IOUT_MIN, 0);
|
||||
break;
|
||||
case PMBUS_VIRT_RESET_VOUT_HISTORY:
|
||||
ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VOUT, 0);
|
||||
|
|
@ -185,6 +241,9 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
|
|||
break;
|
||||
case PMBUS_VIRT_RESET_PIN_HISTORY:
|
||||
ret = pmbus_write_word_data(client, 0, ADM1276_PEAK_PIN, 0);
|
||||
if (!ret && data->have_pin_min)
|
||||
ret = pmbus_write_word_data(client, 0,
|
||||
ADM1293_PIN_MIN, 0);
|
||||
break;
|
||||
default:
|
||||
ret = -ENODATA;
|
||||
|
|
@ -231,6 +290,15 @@ static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg)
|
|||
ret |= PB_VOLTAGE_OV_WARNING;
|
||||
if (mfr_status & ADM1075_VAUX_UV_WARN)
|
||||
ret |= PB_VOLTAGE_UV_WARNING;
|
||||
} else if (data->have_mfr_vaux_status) {
|
||||
mfr_status = pmbus_read_byte_data(client, page,
|
||||
PMBUS_STATUS_MFR_SPECIFIC);
|
||||
if (mfr_status < 0)
|
||||
return mfr_status;
|
||||
if (mfr_status & ADM1293_MFR_STATUS_VAUX_OV_WARN)
|
||||
ret |= PB_VOLTAGE_OV_WARNING;
|
||||
if (mfr_status & ADM1293_MFR_STATUS_VAUX_UV_WARN)
|
||||
ret |= PB_VOLTAGE_UV_WARNING;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
|
|
@ -244,6 +312,8 @@ static const struct i2c_device_id adm1275_id[] = {
|
|||
{ "adm1075", adm1075 },
|
||||
{ "adm1275", adm1275 },
|
||||
{ "adm1276", adm1276 },
|
||||
{ "adm1293", adm1293 },
|
||||
{ "adm1294", adm1294 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, adm1275_id);
|
||||
|
|
@ -258,7 +328,7 @@ static int adm1275_probe(struct i2c_client *client,
|
|||
struct adm1275_data *data;
|
||||
const struct i2c_device_id *mid;
|
||||
const struct coefficients *coefficients;
|
||||
int vindex = -1, cindex = -1, pindex = -1;
|
||||
int vindex = -1, voindex = -1, cindex = -1, pindex = -1;
|
||||
|
||||
if (!i2c_check_functionality(client->adapter,
|
||||
I2C_FUNC_SMBUS_READ_BYTE_DATA
|
||||
|
|
@ -390,17 +460,72 @@ static int adm1275_probe(struct i2c_client *client,
|
|||
info->func[0] |=
|
||||
PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
|
||||
break;
|
||||
case adm1293:
|
||||
case adm1294:
|
||||
data->have_iout_min = true;
|
||||
data->have_pin_min = true;
|
||||
data->have_pin_max = true;
|
||||
data->have_mfr_vaux_status = true;
|
||||
|
||||
coefficients = adm1293_coefficients;
|
||||
|
||||
voindex = 0;
|
||||
switch (config & ADM1293_VIN_SEL_MASK) {
|
||||
case ADM1293_VIN_SEL_012: /* 1.2V */
|
||||
vindex = 0;
|
||||
break;
|
||||
case ADM1293_VIN_SEL_074: /* 7.4V */
|
||||
vindex = 1;
|
||||
break;
|
||||
case ADM1293_VIN_SEL_210: /* 21V */
|
||||
vindex = 2;
|
||||
break;
|
||||
default: /* disabled */
|
||||
break;
|
||||
}
|
||||
|
||||
switch (config & ADM1293_IRANGE_MASK) {
|
||||
case ADM1293_IRANGE_25:
|
||||
cindex = 3;
|
||||
break;
|
||||
case ADM1293_IRANGE_50:
|
||||
cindex = 4;
|
||||
break;
|
||||
case ADM1293_IRANGE_100:
|
||||
cindex = 5;
|
||||
break;
|
||||
case ADM1293_IRANGE_200:
|
||||
cindex = 6;
|
||||
break;
|
||||
}
|
||||
|
||||
if (vindex >= 0)
|
||||
pindex = 7 + vindex * 4 + (cindex - 3);
|
||||
|
||||
if (config & ADM1293_VAUX_EN)
|
||||
info->func[0] |=
|
||||
PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
|
||||
|
||||
info->func[0] |= PMBUS_HAVE_PIN |
|
||||
PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT;
|
||||
|
||||
break;
|
||||
default:
|
||||
dev_err(&client->dev, "Unsupported device\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
if (voindex < 0)
|
||||
voindex = vindex;
|
||||
if (vindex >= 0) {
|
||||
info->m[PSC_VOLTAGE_IN] = coefficients[vindex].m;
|
||||
info->b[PSC_VOLTAGE_IN] = coefficients[vindex].b;
|
||||
info->R[PSC_VOLTAGE_IN] = coefficients[vindex].R;
|
||||
info->m[PSC_VOLTAGE_OUT] = coefficients[vindex].m;
|
||||
info->b[PSC_VOLTAGE_OUT] = coefficients[vindex].b;
|
||||
info->R[PSC_VOLTAGE_OUT] = coefficients[vindex].R;
|
||||
}
|
||||
if (voindex >= 0) {
|
||||
info->m[PSC_VOLTAGE_OUT] = coefficients[voindex].m;
|
||||
info->b[PSC_VOLTAGE_OUT] = coefficients[voindex].b;
|
||||
info->R[PSC_VOLTAGE_OUT] = coefficients[voindex].R;
|
||||
}
|
||||
if (cindex >= 0) {
|
||||
info->m[PSC_CURRENT_OUT] = coefficients[cindex].m;
|
||||
|
|
|
|||
Loading…
Reference in New Issue