openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge branch 'sched/urgent' into sched/core, to pick up fixes before applying new changes 

Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit is contained in:
Ingo Molnar 2016-02-29 09:42:07 +01:00
parent abedf8e241 48be3a67da
commit 6aa447bcbb
1048 changed files with 12059 additions and 60056 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/cgroup-v2.txt
View File

@ -7,7 +7,7 @@ This is the authoritative documentation on the design, interface and
conventions of cgroup v2. It describes all userland-visible aspects
of cgroup including core and specific controller behaviors. All
future changes must be reflected in this document. Documentation for
v1 is available under Documentation/cgroup-legacy/.
v1 is available under Documentation/cgroup-v1/.
CONTENTS

2
Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
View File

@ -30,7 +30,7 @@ that they are defined using standard clock bindings with following
clock-output-names:
- "xin24m" - crystal input - required,
- "ext_i2s" - external I2S clock - optional,
- "ext_gmac" - external GMAC clock - optional
- "rmii_clkin" - external EMAC clock - optional
Example: Clock controller node:

5
Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
View File

@ -24,9 +24,8 @@ Main node required properties:
1 = edge triggered
4 = level triggered
Cells 4 and beyond are reserved for future use. When the 1st cell
has a value of 0 or 1, cells 4 and beyond act as padding, and may be
ignored. It is recommended that padding cells have a value of 0.
Cells 4 and beyond are reserved for future use and must have a value
of 0 if present.
- reg : Specifies base physical address(s) and size of the GIC
registers, in the following order:

4
Documentation/devicetree/bindings/net/renesas,ravb.txt
View File

@ -82,8 +82,8 @@ Example:
"ch16", "ch17", "ch18", "ch19",
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&mstp8_clks R8A7795_CLK_ETHERAVB>;
power-domains = <&cpg_clocks>;
clocks = <&cpg CPG_MOD 812>;
power-domains = <&cpg>;
phy-mode = "rgmii-id";
phy-handle = <&phy0>;

1
Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
View File

@ -8,6 +8,7 @@ OHCI and EHCI controllers.
Required properties:
- compatible: "renesas,pci-r8a7790" for the R8A7790 SoC;
"renesas,pci-r8a7791" for the R8A7791 SoC;
"renesas,pci-r8a7793" for the R8A7793 SoC;
"renesas,pci-r8a7794" for the R8A7794 SoC;
"renesas,pci-rcar-gen2" for a generic R-Car Gen2 compatible device

1
Documentation/devicetree/bindings/pci/rcar-pci.txt
View File

@ -4,6 +4,7 @@ Required properties:
compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
"renesas,pcie-r8a7790" for the R8A7790 SoC;
"renesas,pcie-r8a7791" for the R8A7791 SoC;
"renesas,pcie-r8a7793" for the R8A7793 SoC;
"renesas,pcie-r8a7795" for the R8A7795 SoC;
"renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device.

10
Documentation/devicetree/bindings/regulator/tps65217.txt
View File

@ -26,11 +26,7 @@ Example:
ti,pmic-shutdown-controller;
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: dcdc1 {
reg = <0>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@ -38,7 +34,6 @@ Example:
};
dcdc2_reg: dcdc2 {
reg = <1>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@ -46,7 +41,6 @@ Example:
};
dcdc3_reg: dcc3 {
reg = <2>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
@ -54,7 +48,6 @@ Example:
};
ldo1_reg: ldo1 {
reg = <3>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@ -62,7 +55,6 @@ Example:
};
ldo2_reg: ldo2 {
reg = <4>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@ -70,7 +62,6 @@ Example:
};
ldo3_reg: ldo3 {
reg = <5>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@ -78,7 +69,6 @@ Example:
};
ldo4_reg: ldo4 {
reg = <6>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;

6
Documentation/devicetree/bindings/rtc/s3c-rtc.txt
View File

@ -14,6 +14,10 @@ Required properties:
interrupt number is the rtc alarm interrupt and second interrupt number
is the rtc tick interrupt. The number of cells representing a interrupt
depends on the parent interrupt controller.
- clocks: Must contain a list of phandle and clock specifier for the rtc
and source clocks.
- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the
same order as the clocks property.
Example:
@ -21,4 +25,6 @@ Example:
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
interrupts = <44 0 45 0>;
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
clock-names = "rtc", "rtc_src";
};

2
Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
View File

@ -9,7 +9,7 @@ Optional properties:
- fsl,uart-has-rtscts : Indicate the uart has rts and cts
- fsl,irda-mode : Indicate the uart supports irda mode
- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
is DCE mode by default.
in DCE mode by default.
Note: Each uart controller should have an alias correctly numbered
in "aliases" node.

2
Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
View File

@ -30,6 +30,8 @@ The compatible list for this generic sound card currently:
"fsl,imx-audio-sgtl5000"
(compatible with Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt)
"fsl,imx-audio-wm8960"
Required properties:
- compatible : Contains one of entries in the compatible list.

37
Documentation/devicetree/bindings/thermal/rcar-thermal.txt
View File

@ -1,8 +1,9 @@
* Renesas R-Car Thermal
Required properties:
- compatible : "renesas,thermal-<soctype>", "renesas,rcar-thermal"
as fallback.
- compatible : "renesas,thermal-<soctype>",
"renesas,rcar-gen2-thermal" (with thermal-zone) or
"renesas,rcar-thermal" (without thermal-zone) as fallback.
Examples with soctypes are:
- "renesas,thermal-r8a73a4" (R-Mobile APE6)
- "renesas,thermal-r8a7779" (R-Car H1)
@ -36,3 +37,35 @@ thermal@e61f0000 {
0xe61f0300 0x38>;
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
};
Example (with thermal-zone):
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&thermal>;
trips {
cpu-crit {
temperature = <115000>;
hysteresis = <0>;
type = "critical";
};
};
cooling-maps {
};
};
};
thermal: thermal@e61f0000 {
compatible = "renesas,thermal-r8a7790",
"renesas,rcar-gen2-thermal",
"renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
power-domains = <&cpg_clocks>;
#thermal-sensor-cells = <0>;
};

7
Documentation/filesystems/efivarfs.txt
View File

@ -14,3 +14,10 @@ filesystem.
efivarfs is typically mounted like this,
mount -t efivarfs none /sys/firmware/efi/efivars
Due to the presence of numerous firmware bugs where removing non-standard
UEFI variables causes the system firmware to fail to POST, efivarfs
files that are not well-known standardized variables are created
as immutable files. This doesn't prevent removal - "chattr -i" will work -
but it does prevent this kind of failure from being accomplished
accidentally.

11
Documentation/kernel-parameters.txt
View File

@ -4240,6 +4240,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
The default value of this parameter is determined by
the config option CONFIG_WQ_POWER_EFFICIENT_DEFAULT.
workqueue.debug_force_rr_cpu
Workqueue used to implicitly guarantee that work
items queued without explicit CPU specified are put
on the local CPU. This guarantee is no longer true
and while local CPU is still preferred work items
may be put on foreign CPUs. This debug option
forces round-robin CPU selection to flush out
usages which depend on the now broken guarantee.
When enabled, memory and cache locality will be
impacted.
x2apic_phys [X86-64,APIC] Use x2apic physical mode instead of
default x2apic cluster mode on platforms
supporting x2apic.

4
Documentation/timers/hpet.txt
View File

@ -1,9 +1,7 @@
High Precision Event Timer Driver for Linux
The High Precision Event Timer (HPET) hardware follows a specification
by Intel and Microsoft which can be found at
http://www.intel.com/hardwaredesign/hpetspec_1.pdf
by Intel and Microsoft, revision 1.
Each HPET has one fixed-rate counter (at 10+ MHz, hence "High Precision")
and up to 32 comparators. Normally three or more comparators are provided,

83
MAINTAINERS
View File

@ -223,9 +223,7 @@ F: drivers/scsi/aacraid/
ABI/API
L: linux-api@vger.kernel.org
F: Documentation/ABI/
F: include/linux/syscalls.h
F: include/uapi/
F: kernel/sys_ni.c
ABIT UGURU 1,2 HARDWARE MONITOR DRIVER
@ -686,13 +684,6 @@ M: Michael Hanselmann <linux-kernel@hansmi.ch>
S: Supported
F: drivers/macintosh/ams/
AMSO1100 RNIC DRIVER
M: Tom Tucker <tom@opengridcomputing.com>
M: Steve Wise <swise@opengridcomputing.com>
L: linux-rdma@vger.kernel.org
S: Maintained
F: drivers/infiniband/hw/amso1100/
ANALOG DEVICES INC AD9389B DRIVER
M: Hans Verkuil <hans.verkuil@cisco.com>
L: linux-media@vger.kernel.org
@ -929,17 +920,24 @@ M: Emilio López <emilio@elopez.com.ar>
S: Maintained
F: drivers/clk/sunxi/
ARM/Amlogic MesonX SoC support
ARM/Amlogic Meson SoC support
M: Carlo Caione <carlo@caione.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-meson@googlegroups.com
W: http://linux-meson.com/
S: Maintained
F: drivers/media/rc/meson-ir.c
N: meson[x68]
F: arch/arm/mach-meson/
F: arch/arm/boot/dts/meson*
N: meson
ARM/Annapurna Labs ALPINE ARCHITECTURE
M: Tsahee Zidenberg <tsahee@annapurnalabs.com>
M: Antoine Tenart <antoine.tenart@free-electrons.com>
S: Maintained
F: arch/arm/mach-alpine/
F: arch/arm/boot/dts/alpine*
F: arch/arm64/boot/dts/al/
F: drivers/*/*alpine*
ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
M: Nicolas Ferre <nicolas.ferre@atmel.com>
@ -1451,8 +1449,8 @@ S: Maintained
ARM/RENESAS ARM64 ARCHITECTURE
M: Simon Horman <horms@verge.net.au>
M: Magnus Damm <magnus.damm@gmail.com>
L: linux-sh@vger.kernel.org
Q: http://patchwork.kernel.org/project/linux-sh/list/
L: linux-renesas-soc@vger.kernel.org
Q: http://patchwork.kernel.org/project/linux-renesas-soc/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
S: Supported
F: arch/arm64/boot/dts/renesas/
@ -2371,14 +2369,6 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi.git
S: Maintained
N: bcm2835
BROADCOM BCM33XX MIPS ARCHITECTURE
M: Kevin Cernekee <cernekee@gmail.com>
L: linux-mips@linux-mips.org
S: Maintained
F: arch/mips/bcm3384/*
F: arch/mips/include/asm/mach-bcm3384/*
F: arch/mips/kernel/*bmips*
BROADCOM BCM47XX MIPS ARCHITECTURE
M: Hauke Mehrtens <hauke@hauke-m.de>
M: Rafał Miłecki <zajec5@gmail.com>
@ -3459,9 +3449,8 @@ S: Maintained
F: drivers/usb/dwc2/
DESIGNWARE USB3 DRD IP DRIVER
M: Felipe Balbi <balbi@ti.com>
M: Felipe Balbi <balbi@kernel.org>
L: linux-usb@vger.kernel.org
L: linux-omap@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
S: Maintained
F: drivers/usb/dwc3/
@ -4198,13 +4187,6 @@ W: http://aeschi.ch.eu.org/efs/
S: Orphan
F: fs/efs/
EHCA (IBM GX bus InfiniBand adapter) DRIVER
M: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
M: Christoph Raisch <raisch@de.ibm.com>
L: linux-rdma@vger.kernel.org
S: Supported
F: drivers/infiniband/hw/ehca/
EHEA (IBM pSeries eHEA 10Gb ethernet adapter) DRIVER
M: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
L: netdev@vger.kernel.org
@ -5823,12 +5805,6 @@ M: Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
S: Maintained
F: net/ipv4/netfilter/ipt_MASQUERADE.c
IPATH DRIVER
M: Mike Marciniszyn <infinipath@intel.com>
L: linux-rdma@vger.kernel.org
S: Maintained
F: drivers/staging/rdma/ipath/
IPMI SUBSYSTEM
M: Corey Minyard <minyard@acm.org>
L: openipmi-developer@lists.sourceforge.net (moderated for non-subscribers)
@ -6158,7 +6134,7 @@ F: include/uapi/linux/sunrpc/
KERNEL SELFTEST FRAMEWORK
M: Shuah Khan <shuahkh@osg.samsung.com>
L: linux-api@vger.kernel.org
L: linux-kselftest@vger.kernel.org
T: git git://git.kernel.org/pub/scm/shuah/linux-kselftest
S: Maintained
F: tools/testing/selftests
@ -7384,7 +7360,7 @@ F: drivers/tty/isicom.c
F: include/linux/isicom.h
MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
M: Felipe Balbi <balbi@ti.com>
M: Bin Liu <b-liu@ti.com>
L: linux-usb@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
S: Maintained
@ -7716,13 +7692,13 @@ S: Maintained
F: arch/nios2/
NOKIA N900 POWER SUPPLY DRIVERS
M: Pali Rohár <pali.rohar@gmail.com>
S: Maintained
R: Pali Rohár <pali.rohar@gmail.com>
F: include/linux/power/bq2415x_charger.h
F: include/linux/power/bq27xxx_battery.h
F: include/linux/power/isp1704_charger.h
F: drivers/power/bq2415x_charger.c
F: drivers/power/bq27xxx_battery.c
F: drivers/power/bq27xxx_battery_i2c.c
F: drivers/power/isp1704_charger.c
F: drivers/power/rx51_battery.c
@ -7953,11 +7929,9 @@ F: drivers/media/platform/omap3isp/
F: drivers/staging/media/omap4iss/
OMAP USB SUPPORT
M: Felipe Balbi <balbi@ti.com>
L: linux-usb@vger.kernel.org
L: linux-omap@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
S: Maintained
S: Orphan
F: drivers/usb/*/*omap*
F: arch/arm/*omap*/usb*
@ -9588,6 +9562,12 @@ M: Andreas Noever <andreas.noever@gmail.com>
S: Maintained
F: drivers/thunderbolt/
TI BQ27XXX POWER SUPPLY DRIVER
R: Andrew F. Davis <afd@ti.com>
F: include/linux/power/bq27xxx_battery.h
F: drivers/power/bq27xxx_battery.c
F: drivers/power/bq27xxx_battery_i2c.c
TIMEKEEPING, CLOCKSOURCE CORE, NTP, ALARMTIMER
M: John Stultz <john.stultz@linaro.org>
M: Thomas Gleixner <tglx@linutronix.de>
@ -9809,10 +9789,11 @@ S: Supported
F: drivers/scsi/be2iscsi/
Emulex 10Gbps NIC BE2, BE3-R, Lancer, Skyhawk-R DRIVER
M: Sathya Perla <sathya.perla@avagotech.com>
M: Ajit Khaparde <ajit.khaparde@avagotech.com>
M: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
M: Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com>
M: Sathya Perla <sathya.perla@broadcom.com>
M: Ajit Khaparde <ajit.khaparde@broadcom.com>
M: Padmanabh Ratnakar <padmanabh.ratnakar@broadcom.com>
M: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
M: Somnath Kotur <somnath.kotur@broadcom.com>
L: netdev@vger.kernel.org
W: http://www.emulex.com
S: Supported
@ -10174,6 +10155,7 @@ S: Supported
F: drivers/media/pci/solo6x10/
SOFTWARE RAID (Multiple Disks) SUPPORT
M: Shaohua Li <shli@kernel.org>
L: linux-raid@vger.kernel.org
T: git git://neil.brown.name/md
S: Supported
@ -11335,7 +11317,7 @@ F: Documentation/usb/ehci.txt
F: drivers/usb/host/ehci*
USB GADGET/PERIPHERAL SUBSYSTEM
M: Felipe Balbi <balbi@ti.com>
M: Felipe Balbi <balbi@kernel.org>
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org/gadget
T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
@ -11411,7 +11393,7 @@ S: Maintained
F: drivers/net/usb/pegasus.*
USB PHY LAYER
M: Felipe Balbi <balbi@ti.com>
M: Felipe Balbi <balbi@kernel.org>
L: linux-usb@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
S: Maintained
@ -12041,7 +12023,6 @@ F: arch/arm64/xen/
F: arch/arm64/include/asm/xen/
XEN NETWORK BACKEND DRIVER
M: Ian Campbell <ian.campbell@citrix.com>
M: Wei Liu <wei.liu2@citrix.com>
L: xen-devel@lists.xenproject.org (moderated for non-subscribers)
L: netdev@vger.kernel.org

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 5
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc6
NAME = Blurry Fish Butt
# *DOCUMENTATION*

39
arch/arc/Kconfig
View File

@ -12,8 +12,6 @@ config ARC
select BUILDTIME_EXTABLE_SORT
select COMMON_CLK
select CLONE_BACKWARDS
# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
select DEVTMPFS if !INITRAMFS_SOURCE=""
select GENERIC_ATOMIC64
select GENERIC_CLOCKEVENTS
select GENERIC_FIND_FIRST_BIT
@ -275,14 +273,6 @@ config ARC_DCCM_BASE
default "0xA0000000"
depends on ARC_HAS_DCCM
config ARC_HAS_HW_MPY
bool "Use Hardware Multiplier (Normal or Faster XMAC)"
default y
help
Influences how gcc generates code for MPY operations.
If enabled, MPYxx insns are generated, provided by Standard/XMAC
Multipler. Otherwise software multipy lib is used
choice
prompt "MMU Version"
default ARC_MMU_V3 if ARC_CPU_770
@ -338,6 +328,19 @@ config ARC_PAGE_SIZE_4K
endchoice
choice
prompt "MMU Super Page Size"
depends on ISA_ARCV2 && TRANSPARENT_HUGEPAGE
default ARC_HUGEPAGE_2M
config ARC_HUGEPAGE_2M
bool "2MB"
config ARC_HUGEPAGE_16M
bool "16MB"
endchoice
if ISA_ARCOMPACT
config ARC_COMPACT_IRQ_LEVELS
@ -410,7 +413,7 @@ config ARC_HAS_RTC
default n
depends on !SMP
config ARC_HAS_GRTC
config ARC_HAS_GFRC
bool "SMP synchronized 64-bit cycle counter"
default y
depends on SMP
@ -529,14 +532,6 @@ config ARC_DBG_TLB_MISS_COUNT
Counts number of I and D TLB Misses and exports them via Debugfs
The counters can be cleared via Debugfs as well
if SMP
config ARC_IPI_DBG
bool "Debug Inter Core interrupts"
default n
endif
endif
config ARC_UBOOT_SUPPORT
@ -566,6 +561,12 @@ endmenu
endmenu # "ARC Architecture Configuration"
source "mm/Kconfig"
config FORCE_MAX_ZONEORDER
int "Maximum zone order"
default "12" if ARC_HUGEPAGE_16M
default "11"
source "net/Kconfig"
source "drivers/Kconfig"
source "fs/Kconfig"

4
arch/arc/Makefile
View File

@ -74,10 +74,6 @@ ldflags-$(CONFIG_CPU_BIG_ENDIAN) += -EB
# --build-id w/o "-marclinux". Default arc-elf32-ld is OK
ldflags-$(upto_gcc44) += -marclinux
ifndef CONFIG_ARC_HAS_HW_MPY
cflags-y += -mno-mpy
endif
LIBGCC := $(shell $(CC) $(cflags-y) --print-libgcc-file-name)
# Modules with short calls might break for calls into builtin-kernel

4
arch/arc/configs/axs101_defconfig
View File

@ -39,6 +39,7 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
@ -73,7 +74,6 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
@ -91,12 +91,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_DW=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y

10
arch/arc/configs/axs103_defconfig
View File

@ -39,14 +39,10 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_AXS=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
@ -78,14 +74,12 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
@ -97,12 +91,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_DW=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y

10
arch/arc/configs/axs103_smp_defconfig
View File

@ -40,14 +40,10 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_AXS=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
@ -79,14 +75,12 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
@ -98,12 +92,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_DW=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y

5
arch/arc/configs/nsim_700_defconfig
View File

@ -4,6 +4,7 @@ CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
@ -26,7 +27,6 @@ CONFIG_ARC_PLAT_SIM=y
CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -34,6 +34,7 @@ CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
@ -51,7 +52,6 @@ CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
@ -63,4 +63,3 @@ CONFIG_NFS_FS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_XZ_DEC=y

3
arch/arc/configs/nsim_hs_defconfig
View File

@ -35,6 +35,7 @@ CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
@ -49,7 +50,6 @@ CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
@ -61,4 +61,3 @@ CONFIG_NFS_FS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_XZ_DEC=y

6
arch/arc/configs/nsim_hs_smp_defconfig
View File

@ -2,6 +2,7 @@ CONFIG_CROSS_COMPILE="arc-linux-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
@ -21,13 +22,11 @@ CONFIG_MODULES=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARC_PLAT_SIM=y
CONFIG_ARC_BOARD_ML509=y
CONFIG_ISA_ARCV2=y
CONFIG_SMP=y
CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs_idu"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -35,6 +34,7 @@ CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
@ -49,7 +49,6 @@ CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
@ -60,4 +59,3 @@ CONFIG_TMPFS=y
CONFIG_NFS_FS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_XZ_DEC=y

2
arch/arc/configs/nsimosci_defconfig
View File

@ -33,6 +33,7 @@ CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
@ -58,7 +59,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_HID is not set

3
arch/arc/configs/nsimosci_hs_defconfig
View File

@ -34,12 +34,12 @@ CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
# CONFIG_BLK_DEV is not set
CONFIG_NETDEVICES=y
CONFIG_NET_OSCI_LAN=y
CONFIG_INPUT_EVDEV=y
# CONFIG_MOUSE_PS2_ALPS is not set
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
@ -58,7 +58,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_HID is not set

12
arch/arc/configs/nsimosci_hs_smp_defconfig
View File

@ -2,6 +2,7 @@ CONFIG_CROSS_COMPILE="arc-linux-"
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
@ -18,15 +19,11 @@ CONFIG_MODULES=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARC_PLAT_SIM=y
CONFIG_ARC_BOARD_ML509=y
CONFIG_ISA_ARCV2=y
CONFIG_SMP=y
CONFIG_ARC_HAS_LL64=y
# CONFIG_ARC_HAS_RTSC is not set
CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs_idu"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
@ -40,6 +37,7 @@ CONFIG_INET=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
@ -56,14 +54,11 @@ CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NET_OSCI_LAN=y
# CONFIG_WLAN is not set
CONFIG_INPUT_EVDEV=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
@ -75,9 +70,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_ARCPGU_RGB888=y
CONFIG_ARCPGU_DISPTYPE=0
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_HID is not set

18
arch/arc/configs/tb10x_defconfig
View File

@ -3,6 +3,7 @@ CONFIG_CROSS_COMPILE="arc-linux-"
CONFIG_DEFAULT_HOSTNAME="tb10x"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
@ -26,12 +27,10 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_BLOCK is not set
CONFIG_ARC_PLAT_TB10X=y
CONFIG_ARC_CACHE_LINE_SHIFT=5
CONFIG_ARC_STACK_NONEXEC=y
CONFIG_HZ=250
CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk"
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -44,8 +43,8 @@ CONFIG_IP_MULTICAST=y
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_PROC_DEVICETREE=y
CONFIG_NETDEVICES=y
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
@ -55,9 +54,6 @@ CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_DEBUG_FS=y
CONFIG_STMMAC_DA=y
CONFIG_STMMAC_CHAINED=y
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT is not set
@ -91,7 +87,6 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_DMADEVICES=y
CONFIG_DW_DMAC=y
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_DNOTIFY is not set
@ -100,17 +95,16 @@ CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_DEBUG_INFO=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set

2
arch/arc/configs/vdk_hs38_smp_defconfig
View File

@ -16,7 +16,7 @@ CONFIG_ARC_PLAT_AXS10X=y
CONFIG_AXS103=y
CONFIG_ISA_ARCV2=y
CONFIG_SMP=y
# CONFIG_ARC_HAS_GRTC is not set
# CONFIG_ARC_HAS_GFRC is not set
CONFIG_ARC_UBOOT_SUPPORT=y
CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
CONFIG_PREEMPT=y

35
arch/arc/include/asm/arcregs.h
View File

@ -10,7 +10,8 @@
#define _ASM_ARC_ARCREGS_H
/* Build Configuration Registers */
#define ARC_REG_DCCMBASE_BCR 0x61 /* DCCM Base Addr */
#define ARC_REG_AUX_DCCM 0x18 /* DCCM Base Addr ARCv2 */
#define ARC_REG_DCCM_BASE_BUILD 0x61 /* DCCM Base Addr ARCompact */
#define ARC_REG_CRC_BCR 0x62
#define ARC_REG_VECBASE_BCR 0x68
#define ARC_REG_PERIBASE_BCR 0x69
@ -18,10 +19,10 @@
#define ARC_REG_DPFP_BCR 0x6C /* ARCompact: Dbl Precision FPU */
#define ARC_REG_FP_V2_BCR 0xc8 /* ARCv2 FPU */
#define ARC_REG_SLC_BCR 0xce
#define ARC_REG_DCCM_BCR 0x74 /* DCCM Present + SZ */
#define ARC_REG_DCCM_BUILD 0x74 /* DCCM size (common) */
#define ARC_REG_TIMERS_BCR 0x75
#define ARC_REG_AP_BCR 0x76
#define ARC_REG_ICCM_BCR 0x78
#define ARC_REG_ICCM_BUILD 0x78 /* ICCM size (common) */
#define ARC_REG_XY_MEM_BCR 0x79
#define ARC_REG_MAC_BCR 0x7a
#define ARC_REG_MUL_BCR 0x7b
@ -36,6 +37,7 @@
#define ARC_REG_IRQ_BCR 0xF3
#define ARC_REG_SMART_BCR 0xFF
#define ARC_REG_CLUSTER_BCR 0xcf
#define ARC_REG_AUX_ICCM 0x208 /* ICCM Base Addr (ARCv2) */
/* status32 Bits Positions */
#define STATUS_AE_BIT 5 /* Exception active */
@ -246,7 +248,7 @@ struct bcr_perip {
#endif
};
struct bcr_iccm {
struct bcr_iccm_arcompact {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int base:16, pad:5, sz:3, ver:8;
#else
@ -254,17 +256,15 @@ struct bcr_iccm {
#endif
};
/* DCCM Base Address Register: ARC_REG_DCCMBASE_BCR */
struct bcr_dccm_base {
struct bcr_iccm_arcv2 {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int addr:24, ver:8;
unsigned int pad:8, sz11:4, sz01:4, sz10:4, sz00:4, ver:8;
#else
unsigned int ver:8, addr:24;
unsigned int ver:8, sz00:4, sz10:4, sz01:4, sz11:4, pad:8;
#endif
};
/* DCCM RAM Configuration Register: ARC_REG_DCCM_BCR */
struct bcr_dccm {
struct bcr_dccm_arcompact {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int res:21, sz:3, ver:8;
#else
@ -272,6 +272,14 @@ struct bcr_dccm {
#endif
};
struct bcr_dccm_arcv2 {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad2:12, cyc:3, pad1:1, sz1:4, sz0:4, ver:8;
#else
unsigned int ver:8, sz0:4, sz1:4, pad1:1, cyc:3, pad2:12;
#endif
};
/* ARCompact: Both SP and DP FPU BCRs have same format */
struct bcr_fp_arcompact {
#ifdef CONFIG_CPU_BIG_ENDIAN
@ -315,9 +323,9 @@ struct bcr_bpu_arcv2 {
struct bcr_generic {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:24, ver:8;
unsigned int info:24, ver:8;
#else
unsigned int ver:8, pad:24;
unsigned int ver:8, info:24;
#endif
};
@ -349,14 +357,13 @@ struct cpuinfo_arc {
struct cpuinfo_arc_bpu bpu;
struct bcr_identity core;
struct bcr_isa isa;
struct bcr_timer timers;
unsigned int vec_base;
struct cpuinfo_arc_ccm iccm, dccm;
struct {
unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, pad1:3,
fpu_sp:1, fpu_dp:1, pad2:6,
debug:1, ap:1, smart:1, rtt:1, pad3:4,
pad4:8;
timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
} extn;
struct bcr_mpy extn_mpy;
struct bcr_extn_xymem extn_xymem;

2
arch/arc/include/asm/irq.h
View File

@ -16,11 +16,9 @@
#ifdef CONFIG_ISA_ARCOMPACT
#define TIMER0_IRQ 3
#define TIMER1_IRQ 4
#define IPI_IRQ (NR_CPU_IRQS-1) /* dummy to enable SMP build for up hardware */
#else
#define TIMER0_IRQ 16
#define TIMER1_IRQ 17
#define IPI_IRQ 19
#endif
#include <linux/interrupt.h>

18
arch/arc/include/asm/irqflags-arcv2.h
View File

@ -22,6 +22,7 @@
#define AUX_IRQ_CTRL 0x00E
#define AUX_IRQ_ACT 0x043 /* Active Intr across all levels */
#define AUX_IRQ_LVL_PEND 0x200 /* Pending Intr across all levels */
#define AUX_IRQ_HINT 0x201 /* For generating Soft Interrupts */
#define AUX_IRQ_PRIORITY 0x206
#define ICAUSE 0x40a
#define AUX_IRQ_SELECT 0x40b
@ -30,8 +31,11 @@
/* Was Intr taken in User Mode */
#define AUX_IRQ_ACT_BIT_U 31
/* 0 is highest level, but taken by FIRQs, if present in design */
#define ARCV2_IRQ_DEF_PRIO 0
/*
* User space should be interruptable even by lowest prio interrupt
* Safe even if actual interrupt priorities is fewer or even one
*/
#define ARCV2_IRQ_DEF_PRIO 15
/* seed value for status register */
#define ISA_INIT_STATUS_BITS (STATUS_IE_MASK | STATUS_AD_MASK | \
@ -112,6 +116,16 @@ static inline int arch_irqs_disabled(void)
return arch_irqs_disabled_flags(arch_local_save_flags());
}
static inline void arc_softirq_trigger(int irq)
{
write_aux_reg(AUX_IRQ_HINT, irq);
}
static inline void arc_softirq_clear(int irq)
{
write_aux_reg(AUX_IRQ_HINT, 0);
}
#else
.macro IRQ_DISABLE scratch

4
arch/arc/include/asm/mcip.h
View File

@ -39,8 +39,8 @@ struct mcip_cmd {
#define CMD_DEBUG_SET_MASK 0x34
#define CMD_DEBUG_SET_SELECT 0x36
#define CMD_GRTC_READ_LO 0x42
#define CMD_GRTC_READ_HI 0x43
#define CMD_GFRC_READ_LO 0x42
#define CMD_GFRC_READ_HI 0x43
#define CMD_IDU_ENABLE 0x71
#define CMD_IDU_DISABLE 0x72

45
arch/arc/include/asm/pgtable.h
View File

@ -179,37 +179,44 @@
#define __S111 PAGE_U_X_W_R
/****************************************************************
* Page Table Lookup split
* 2 tier (PGD:PTE) software page walker
*
* We implement 2 tier paging and since this is all software, we are free
* to customize the span of a PGD / PTE entry to suit us
*
* 32 bit virtual address
* [31] 32 bit virtual address [0]
* -------------------------------------------------------
* | BITS_FOR_PGD | BITS_FOR_PTE | BITS_IN_PAGE |
* | | <------------ PGDIR_SHIFT ----------> |
* | | |
* | BITS_FOR_PGD | BITS_FOR_PTE | <-- PAGE_SHIFT --> |
* -------------------------------------------------------
* | | |
* | | --> off in page frame
* | |
* | ---> index into Page Table
* |
* ----> index into Page Directory
*
* In a single page size configuration, only PAGE_SHIFT is fixed
* So both PGD and PTE sizing can be tweaked
* e.g. 8K page (PAGE_SHIFT 13) can have
* - PGDIR_SHIFT 21 -> 11:8:13 address split
* - PGDIR_SHIFT 24 -> 8:11:13 address split
*
* If Super Page is configured, PGDIR_SHIFT becomes fixed too,
* so the sizing flexibility is gone.
*/
#define BITS_IN_PAGE PAGE_SHIFT
/* Optimal Sizing of Pg Tbl - based on MMU page size */
#if defined(CONFIG_ARC_PAGE_SIZE_8K)
#define BITS_FOR_PTE 8 /* 11:8:13 */
#elif defined(CONFIG_ARC_PAGE_SIZE_16K)
#define BITS_FOR_PTE 8 /* 10:8:14 */
#elif defined(CONFIG_ARC_PAGE_SIZE_4K)
#define BITS_FOR_PTE 9 /* 11:9:12 */
#if defined(CONFIG_ARC_HUGEPAGE_16M)
#define PGDIR_SHIFT 24
#elif defined(CONFIG_ARC_HUGEPAGE_2M)
#define PGDIR_SHIFT 21
#else
/*
* Only Normal page support so "hackable" (see comment above)
* Default value provides 11:8:13 (8K), 11:9:12 (4K)
*/
#define PGDIR_SHIFT 21
#endif
#define BITS_FOR_PGD (32 - BITS_FOR_PTE - BITS_IN_PAGE)
#define BITS_FOR_PTE (PGDIR_SHIFT - PAGE_SHIFT)
#define BITS_FOR_PGD (32 - PGDIR_SHIFT)
#define PGDIR_SHIFT (32 - BITS_FOR_PGD)
#define PGDIR_SIZE (1UL << PGDIR_SHIFT) /* vaddr span, not PDG sz */
#define PGDIR_MASK (~(PGDIR_SIZE-1))

30
arch/arc/kernel/entry-arcv2.S
View File

@ -45,11 +45,12 @@ VECTOR reserved ; Reserved slots
VECTOR handle_interrupt ; (16) Timer0
VECTOR handle_interrupt ; unused (Timer1)
VECTOR handle_interrupt ; unused (WDT)
VECTOR handle_interrupt ; (19) ICI (inter core interrupt)
VECTOR handle_interrupt
VECTOR handle_interrupt
VECTOR handle_interrupt
VECTOR handle_interrupt ; (23) End of fixed IRQs
VECTOR handle_interrupt ; (19) Inter core Interrupt (IPI)
VECTOR handle_interrupt ; (20) perf Interrupt
VECTOR handle_interrupt ; (21) Software Triggered Intr (Self IPI)
VECTOR handle_interrupt ; unused
VECTOR handle_interrupt ; (23) unused
# End of fixed IRQs
.rept CONFIG_ARC_NUMBER_OF_INTERRUPTS - 8
VECTOR handle_interrupt
@ -211,7 +212,11 @@ debug_marker_syscall:
; (since IRQ NOT allowed in DS in ARCv2, this can only happen if orig
; entry was via Exception in DS which got preempted in kernel).
;
; IRQ RTIE won't reliably restore DE bit and/or BTA, needs handling
; IRQ RTIE won't reliably restore DE bit and/or BTA, needs workaround
;
; Solution is return from Intr w/o any delay slot quirks into a kernel trampoline
; and from pure kernel mode return to delay slot which handles DS bit/BTA correctly
.Lintr_ret_to_delay_slot:
debug_marker_ds:
@ -222,18 +227,23 @@ debug_marker_ds:
ld r2, [sp, PT_ret]
ld r3, [sp, PT_status32]
; STAT32 for Int return created from scratch
; (No delay dlot, disable Further intr in trampoline)
bic r0, r3, STATUS_U_MASK|STATUS_DE_MASK|STATUS_IE_MASK|STATUS_L_MASK
st r0, [sp, PT_status32]
mov r1, .Lintr_ret_to_delay_slot_2
st r1, [sp, PT_ret]
; Orig exception PC/STAT32 safekept @orig_r0 and @event stack slots
st r2, [sp, 0]
st r3, [sp, 4]
b .Lisr_ret_fast_path
.Lintr_ret_to_delay_slot_2:
; Trampoline to restore orig exception PC/STAT32/BTA/AUX_USER_SP
sub sp, sp, SZ_PT_REGS
st r9, [sp, -4]
@ -243,11 +253,19 @@ debug_marker_ds:
ld r9, [sp, 4]
sr r9, [erstatus]
; restore AUX_USER_SP if returning to U mode
bbit0 r9, STATUS_U_BIT, 1f
ld r9, [sp, PT_sp]
sr r9, [AUX_USER_SP]
1:
ld r9, [sp, 8]
sr r9, [erbta]
ld r9, [sp, -4]
add sp, sp, SZ_PT_REGS
; return from pure kernel mode to delay slot
rtie
END(ret_from_exception)

41
arch/arc/kernel/intc-arcv2.c
View File

@ -14,6 +14,8 @@
#include <linux/irqchip.h>
#include <asm/irq.h>
static int irq_prio;
/*
* Early Hardware specific Interrupt setup
* -Called very early (start_kernel -> setup_arch -> setup_processor)
@ -24,6 +26,14 @@ void arc_init_IRQ(void)
{
unsigned int tmp;
struct irq_build {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:3, firq:1, prio:4, exts:8, irqs:8, ver:8;
#else
unsigned int ver:8, irqs:8, exts:8, prio:4, firq:1, pad:3;
#endif
} irq_bcr;
struct aux_irq_ctrl {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int res3:18, save_idx_regs:1, res2:1,
@ -46,28 +56,25 @@ void arc_init_IRQ(void)
WRITE_AUX(AUX_IRQ_CTRL, ictrl);
/* setup status32, don't enable intr yet as kernel doesn't want */
tmp = read_aux_reg(0xa);
tmp |= ISA_INIT_STATUS_BITS;
tmp &= ~STATUS_IE_MASK;
asm volatile("flag %0 \n"::"r"(tmp));
/*
* ARCv2 core intc provides multiple interrupt priorities (upto 16).
* Typical builds though have only two levels (0-high, 1-low)
* Linux by default uses lower prio 1 for most irqs, reserving 0 for
* NMI style interrupts in future (say perf)
*
* Read the intc BCR to confirm that Linux default priority is avail
* in h/w
*
* Note:
* IRQ_BCR[27..24] contains N-1 (for N priority levels) and prio level
* is 0 based.
*/
tmp = (read_aux_reg(ARC_REG_IRQ_BCR) >> 24 ) & 0xF;
if (ARCV2_IRQ_DEF_PRIO > tmp)
panic("Linux default irq prio incorrect\n");
READ_BCR(ARC_REG_IRQ_BCR, irq_bcr);
irq_prio = irq_bcr.prio; /* Encoded as N-1 for N levels */
pr_info("archs-intc\t: %d priority levels (default %d)%s\n",
irq_prio + 1, irq_prio,
irq_bcr.firq ? " FIRQ (not used)":"");
/* setup status32, don't enable intr yet as kernel doesn't want */
tmp = read_aux_reg(0xa);
tmp |= STATUS_AD_MASK | (irq_prio << 1);
tmp &= ~STATUS_IE_MASK;
asm volatile("flag %0 \n"::"r"(tmp));
}
static void arcv2_irq_mask(struct irq_data *data)
@ -86,7 +93,7 @@ void arcv2_irq_enable(struct irq_data *data)
{
/* set default priority */
write_aux_reg(AUX_IRQ_SELECT, data->irq);
write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
write_aux_reg(AUX_IRQ_PRIORITY, irq_prio);
/*
* hw auto enables (linux unmask) all by default

3
arch/arc/kernel/intc-compact.c
View File

@ -81,9 +81,6 @@ static int arc_intc_domain_map(struct irq_domain *d, unsigned int irq,
{
switch (irq) {
case TIMER0_IRQ:
#ifdef CONFIG_SMP
case IPI_IRQ:
#endif
irq_set_chip_and_handler(irq, &onchip_intc, handle_percpu_irq);
break;
default:

70
arch/arc/kernel/mcip.c
View File

@ -11,9 +11,13 @@
#include <linux/smp.h>
#include <linux/irq.h>
#include <linux/spinlock.h>
#include <asm/irqflags-arcv2.h>
#include <asm/mcip.h>
#include <asm/setup.h>
#define IPI_IRQ 19
#define SOFTIRQ_IRQ 21
static char smp_cpuinfo_buf[128];
static int idu_detected;
@ -22,6 +26,7 @@ static DEFINE_RAW_SPINLOCK(mcip_lock);
static void mcip_setup_per_cpu(int cpu)
{
smp_ipi_irq_setup(cpu, IPI_IRQ);
smp_ipi_irq_setup(cpu, SOFTIRQ_IRQ);
}
static void mcip_ipi_send(int cpu)
@ -29,46 +34,44 @@ static void mcip_ipi_send(int cpu)
unsigned long flags;
int ipi_was_pending;
/* ARConnect can only send IPI to others */
if (unlikely(cpu == raw_smp_processor_id())) {
arc_softirq_trigger(SOFTIRQ_IRQ);
return;
}
raw_spin_lock_irqsave(&mcip_lock, flags);
/*
* NOTE: We must spin here if the other cpu hasn't yet
* serviced a previous message. This can burn lots
* of time, but we MUST follows this protocol or
* ipi messages can be lost!!!
* Also, we must release the lock in this loop because
* the other side may get to this same loop and not
* be able to ack -- thus causing deadlock.
* If receiver already has a pending interrupt, elide sending this one.
* Linux cross core calling works well with concurrent IPIs
* coalesced into one
* see arch/arc/kernel/smp.c: ipi_send_msg_one()
*/
__mcip_cmd(CMD_INTRPT_READ_STATUS, cpu);
ipi_was_pending = read_aux_reg(ARC_REG_MCIP_READBACK);
if (!ipi_was_pending)
__mcip_cmd(CMD_INTRPT_GENERATE_IRQ, cpu);
do {
raw_spin_lock_irqsave(&mcip_lock, flags);
__mcip_cmd(CMD_INTRPT_READ_STATUS, cpu);
ipi_was_pending = read_aux_reg(ARC_REG_MCIP_READBACK);
if (ipi_was_pending == 0)
break; /* break out but keep lock */
raw_spin_unlock_irqrestore(&mcip_lock, flags);
} while (1);
__mcip_cmd(CMD_INTRPT_GENERATE_IRQ, cpu);
raw_spin_unlock_irqrestore(&mcip_lock, flags);
#ifdef CONFIG_ARC_IPI_DBG
if (ipi_was_pending)
pr_info("IPI ACK delayed from cpu %d\n", cpu);
#endif
}
static void mcip_ipi_clear(int irq)
{
unsigned int cpu, c;
unsigned long flags;
unsigned int __maybe_unused copy;
if (unlikely(irq == SOFTIRQ_IRQ)) {
arc_softirq_clear(irq);
return;
}
raw_spin_lock_irqsave(&mcip_lock, flags);
/* Who sent the IPI */
__mcip_cmd(CMD_INTRPT_CHECK_SOURCE, 0);
copy = cpu = read_aux_reg(ARC_REG_MCIP_READBACK); /* 1,2,4,8... */
cpu = read_aux_reg(ARC_REG_MCIP_READBACK); /* 1,2,4,8... */
/*
* In rare case, multiple concurrent IPIs sent to same target can
@ -82,12 +85,6 @@ static void mcip_ipi_clear(int irq)
} while (cpu);
raw_spin_unlock_irqrestore(&mcip_lock, flags);
#ifdef CONFIG_ARC_IPI_DBG
if (c != __ffs(copy))
pr_info("IPIs from %x coalesced to %x\n",
copy, raw_smp_processor_id());
#endif
}
static void mcip_probe_n_setup(void)
@ -96,13 +93,13 @@ static void mcip_probe_n_setup(void)
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad3:8,
idu:1, llm:1, num_cores:6,
iocoh:1, grtc:1, dbg:1, pad2:1,
iocoh:1, gfrc:1, dbg:1, pad2:1,
msg:1, sem:1, ipi:1, pad:1,
ver:8;
#else
unsigned int ver:8,
pad:1, ipi:1, sem:1, msg:1,
pad2:1, dbg:1, grtc:1, iocoh:1,
pad2:1, dbg:1, gfrc:1, iocoh:1,
num_cores:6, llm:1, idu:1,
pad3:8;
#endif
@ -111,12 +108,13 @@ static void mcip_probe_n_setup(void)
READ_BCR(ARC_REG_MCIP_BCR, mp);
sprintf(smp_cpuinfo_buf,
"Extn [SMP]\t: ARConnect (v%d): %d cores with %s%s%s%s\n",
"Extn [SMP]\t: ARConnect (v%d): %d cores with %s%s%s%s%s\n",
mp.ver, mp.num_cores,
IS_AVAIL1(mp.ipi, "IPI "),
IS_AVAIL1(mp.idu, "IDU "),
IS_AVAIL1(mp.llm, "LLM "),
IS_AVAIL1(mp.dbg, "DEBUG "),
IS_AVAIL1(mp.grtc, "GRTC"));
IS_AVAIL1(mp.gfrc, "GFRC"));
idu_detected = mp.idu;
@ -125,8 +123,8 @@ static void mcip_probe_n_setup(void)
__mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xf, 0xf);
}
if (IS_ENABLED(CONFIG_ARC_HAS_GRTC) && !mp.grtc)
panic("kernel trying to use non-existent GRTC\n");
if (IS_ENABLED(CONFIG_ARC_HAS_GFRC) && !mp.gfrc)
panic("kernel trying to use non-existent GFRC\n");
}
struct plat_smp_ops plat_smp_ops = {

100
arch/arc/kernel/setup.c
View File

@ -42,9 +42,57 @@ struct task_struct *_current_task[NR_CPUS]; /* For stack switching */
struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
static void read_decode_ccm_bcr(struct cpuinfo_arc *cpu)
{
if (is_isa_arcompact()) {
struct bcr_iccm_arcompact iccm;
struct bcr_dccm_arcompact dccm;
READ_BCR(ARC_REG_ICCM_BUILD, iccm);
if (iccm.ver) {
cpu->iccm.sz = 4096 << iccm.sz; /* 8K to 512K */
cpu->iccm.base_addr = iccm.base << 16;
}
READ_BCR(ARC_REG_DCCM_BUILD, dccm);
if (dccm.ver) {
unsigned long base;
cpu->dccm.sz = 2048 << dccm.sz; /* 2K to 256K */
base = read_aux_reg(ARC_REG_DCCM_BASE_BUILD);
cpu->dccm.base_addr = base & ~0xF;
}
} else {
struct bcr_iccm_arcv2 iccm;
struct bcr_dccm_arcv2 dccm;
unsigned long region;
READ_BCR(ARC_REG_ICCM_BUILD, iccm);
if (iccm.ver) {
cpu->iccm.sz = 256 << iccm.sz00; /* 512B to 16M */
if (iccm.sz00 == 0xF && iccm.sz01 > 0)
cpu->iccm.sz <<= iccm.sz01;
region = read_aux_reg(ARC_REG_AUX_ICCM);
cpu->iccm.base_addr = region & 0xF0000000;
}
READ_BCR(ARC_REG_DCCM_BUILD, dccm);
if (dccm.ver) {
cpu->dccm.sz = 256 << dccm.sz0;
if (dccm.sz0 == 0xF && dccm.sz1 > 0)
cpu->dccm.sz <<= dccm.sz1;
region = read_aux_reg(ARC_REG_AUX_DCCM);
cpu->dccm.base_addr = region & 0xF0000000;
}
}
}
static void read_arc_build_cfg_regs(void)
{
struct bcr_perip uncached_space;
struct bcr_timer timer;
struct bcr_generic bcr;
struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
unsigned long perip_space;
@ -53,7 +101,11 @@ static void read_arc_build_cfg_regs(void)
READ_BCR(AUX_IDENTITY, cpu->core);
READ_BCR(ARC_REG_ISA_CFG_BCR, cpu->isa);
READ_BCR(ARC_REG_TIMERS_BCR, cpu->timers);
READ_BCR(ARC_REG_TIMERS_BCR, timer);
cpu->extn.timer0 = timer.t0;
cpu->extn.timer1 = timer.t1;
cpu->extn.rtc = timer.rtc;
cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
READ_BCR(ARC_REG_D_UNCACH_BCR, uncached_space);
@ -71,36 +123,11 @@ static void read_arc_build_cfg_regs(void)
cpu->extn.swap = read_aux_reg(ARC_REG_SWAP_BCR) ? 1 : 0; /* 1,3 */
cpu->extn.crc = read_aux_reg(ARC_REG_CRC_BCR) ? 1 : 0;
cpu->extn.minmax = read_aux_reg(ARC_REG_MIXMAX_BCR) > 1 ? 1 : 0; /* 2 */
/* Note that we read the CCM BCRs independent of kernel config
* This is to catch the cases where user doesn't know that
* CCMs are present in hardware build
*/
{
struct bcr_iccm iccm;
struct bcr_dccm dccm;
struct bcr_dccm_base dccm_base;
unsigned int bcr_32bit_val;
bcr_32bit_val = read_aux_reg(ARC_REG_ICCM_BCR);
if (bcr_32bit_val) {
iccm = *((struct bcr_iccm *)&bcr_32bit_val);
cpu->iccm.base_addr = iccm.base << 16;
cpu->iccm.sz = 0x2000 << (iccm.sz - 1);
}
bcr_32bit_val = read_aux_reg(ARC_REG_DCCM_BCR);
if (bcr_32bit_val) {
dccm = *((struct bcr_dccm *)&bcr_32bit_val);
cpu->dccm.sz = 0x800 << (dccm.sz);
READ_BCR(ARC_REG_DCCMBASE_BCR, dccm_base);
cpu->dccm.base_addr = dccm_base.addr << 8;
}
}
READ_BCR(ARC_REG_XY_MEM_BCR, cpu->extn_xymem);
/* Read CCM BCRs for boot reporting even if not enabled in Kconfig */
read_decode_ccm_bcr(cpu);
read_decode_mmu_bcr();
read_decode_cache_bcr();
@ -208,9 +235,9 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
(unsigned int)(arc_get_core_freq() / 10000) % 100);
n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s\nISA Extn\t: ",
IS_AVAIL1(cpu->timers.t0, "Timer0 "),
IS_AVAIL1(cpu->timers.t1, "Timer1 "),
IS_AVAIL2(cpu->timers.rtc, "64-bit RTC ",
IS_AVAIL1(cpu->extn.timer0, "Timer0 "),
IS_AVAIL1(cpu->extn.timer1, "Timer1 "),
IS_AVAIL2(cpu->extn.rtc, "Local-64-bit-Ctr ",
CONFIG_ARC_HAS_RTC));
n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s",
@ -232,8 +259,6 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
n += scnprintf(buf + n, len - n, "mpy[opt %d] ", opt);
}
n += scnprintf(buf + n, len - n, "%s",
IS_USED_CFG(CONFIG_ARC_HAS_HW_MPY));
}
n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n",
@ -293,13 +318,13 @@ static void arc_chk_core_config(void)
struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
int fpu_enabled;
if (!cpu->timers.t0)
if (!cpu->extn.timer0)
panic("Timer0 is not present!\n");
if (!cpu->timers.t1)
if (!cpu->extn.timer1)
panic("Timer1 is not present!\n");
if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->timers.rtc)
if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->extn.rtc)
panic("RTC is not present\n");
#ifdef CONFIG_ARC_HAS_DCCM
@ -334,6 +359,7 @@ static void arc_chk_core_config(void)
panic("FPU non-existent, disable CONFIG_ARC_FPU_SAVE_RESTORE\n");
if (is_isa_arcv2() && IS_ENABLED(CONFIG_SMP) && cpu->isa.atomic &&
IS_ENABLED(CONFIG_ARC_HAS_LLSC) &&
!IS_ENABLED(CONFIG_ARC_STAR_9000923308))
panic("llock/scond livelock workaround missing\n");
}

3
arch/arc/kernel/smp.c
View File

@ -336,11 +336,8 @@ irqreturn_t do_IPI(int irq, void *dev_id)
int rc;
rc = __do_IPI(msg);
#ifdef CONFIG_ARC_IPI_DBG
/* IPI received but no valid @msg */
if (rc)
pr_info("IPI with bogus msg %ld in %ld\n", msg, copy);
#endif
pending &= ~(1U << msg);
} while (pending);

8
arch/arc/kernel/time.c
View File

@ -62,7 +62,7 @@
/********** Clock Source Device *********/
#ifdef CONFIG_ARC_HAS_GRTC
#ifdef CONFIG_ARC_HAS_GFRC
static int arc_counter_setup(void)
{
@ -83,10 +83,10 @@ static cycle_t arc_counter_read(struct clocksource *cs)
local_irq_save(flags);
__mcip_cmd(CMD_GRTC_READ_LO, 0);
__mcip_cmd(CMD_GFRC_READ_LO, 0);
stamp.l = read_aux_reg(ARC_REG_MCIP_READBACK);
__mcip_cmd(CMD_GRTC_READ_HI, 0);
__mcip_cmd(CMD_GFRC_READ_HI, 0);
stamp.h = read_aux_reg(ARC_REG_MCIP_READBACK);
local_irq_restore(flags);
@ -95,7 +95,7 @@ static cycle_t arc_counter_read(struct clocksource *cs)
}
static struct clocksource arc_counter = {
.name = "ARConnect GRTC",
.name = "ARConnect GFRC",
.rating = 400,
.read = arc_counter_read,
.mask = CLOCKSOURCE_MASK(64),

14
arch/arm/boot/dts/am335x-bone-common.dtsi
View File

@ -285,8 +285,10 @@ cape3_data: cape_data@0 {
};
};
/include/ "tps65217.dtsi"
&tps {
compatible = "ti,tps65217";
/*
* Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
* mode") at poweroff. Most BeagleBone versions do not support RTC-only
@ -307,17 +309,12 @@ &tps {
ti,pmic-shutdown-controller;
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
regulator-name = "vdds_dpr";
regulator-always-on;
};
dcdc2_reg: regulator@1 {
reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@ -327,7 +324,6 @@ dcdc2_reg: regulator@1 {
};
dcdc3_reg: regulator@2 {
reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@ -337,25 +333,21 @@ dcdc3_reg: regulator@2 {
};
ldo1_reg: regulator@3 {
reg = <3>;
regulator-name = "vio,vrtc,vdds";
regulator-always-on;
};
ldo2_reg: regulator@4 {
reg = <4>;
regulator-name = "vdd_3v3aux";
regulator-always-on;
};
ldo3_reg: regulator@5 {
reg = <5>;
regulator-name = "vdd_1v8";
regulator-always-on;
};
ldo4_reg: regulator@6 {
reg = <6>;
regulator-name = "vdd_3v3a";
regulator-always-on;
};

14
arch/arm/boot/dts/am335x-chilisom.dtsi
View File

@ -128,21 +128,16 @@ tps: tps@24 {
};
/include/ "tps65217.dtsi"
&tps {
compatible = "ti,tps65217";
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
regulator-name = "vdds_dpr";
regulator-always-on;
};
dcdc2_reg: regulator@1 {
reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@ -152,7 +147,6 @@ dcdc2_reg: regulator@1 {
};
dcdc3_reg: regulator@2 {
reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@ -162,28 +156,24 @@ dcdc3_reg: regulator@2 {
};
ldo1_reg: regulator@3 {
reg = <3>;
regulator-name = "vio,vrtc,vdds";
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: regulator@4 {
reg = <4>;
regulator-name = "vdd_3v3aux";
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: regulator@5 {
reg = <5>;
regulator-name = "vdd_1v8";
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: regulator@6 {
reg = <6>;
regulator-name = "vdd_3v3d";
regulator-boot-on;
regulator-always-on;

14
arch/arm/boot/dts/am335x-nano.dts
View File

@ -375,15 +375,11 @@ &mmc1 {
wp-gpios = <&gpio3 18 0>;
};
#include "tps65217.dtsi"
&tps {
compatible = "ti,tps65217";
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
/* +1.5V voltage with ±4% tolerance */
regulator-min-microvolt = <1450000>;
regulator-max-microvolt = <1550000>;
@ -392,7 +388,6 @@ dcdc1_reg: regulator@0 {
};
dcdc2_reg: regulator@1 {
reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <915000>;
@ -402,7 +397,6 @@ dcdc2_reg: regulator@1 {
};
dcdc3_reg: regulator@2 {
reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <915000>;
@ -412,7 +406,6 @@ dcdc3_reg: regulator@2 {
};
ldo1_reg: regulator@3 {
reg = <3>;
/* +1.8V voltage with ±4% tolerance */
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <1870000>;
@ -421,7 +414,6 @@ ldo1_reg: regulator@3 {
};
ldo2_reg: regulator@4 {
reg = <4>;
/* +3.3V voltage with ±4% tolerance */
regulator-min-microvolt = <3175000>;
regulator-max-microvolt = <3430000>;
@ -430,7 +422,6 @@ ldo2_reg: regulator@4 {
};
ldo3_reg: regulator@5 {
reg = <5>;
/* +1.8V voltage with ±4% tolerance */
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <1870000>;
@ -439,7 +430,6 @@ ldo3_reg: regulator@5 {
};
ldo4_reg: regulator@6 {
reg = <6>;
/* +3.3V voltage with ±4% tolerance */
regulator-min-microvolt = <3175000>;
regulator-max-microvolt = <3430000>;

14
arch/arm/boot/dts/am335x-pepper.dts
View File

@ -420,9 +420,9 @@ &vdd5_reg {
vin-supply = <&vbat>;
};
&tps {
compatible = "ti,tps65217";
/include/ "tps65217.dtsi"
&tps {
backlight {
isel = <1>; /* ISET1 */
fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
@ -430,17 +430,12 @@ backlight {
};
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
/* VDD_1V8 system supply */
regulator-always-on;
};
dcdc2_reg: regulator@1 {
reg = <1>;
/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@ -450,7 +445,6 @@ dcdc2_reg: regulator@1 {
};
dcdc3_reg: regulator@2 {
reg = <2>;
/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@ -460,21 +454,18 @@ dcdc3_reg: regulator@2 {
};
ldo1_reg: regulator@3 {
reg = <3>;
/* VRTC 1.8V always-on supply */
regulator-name = "vrtc,vdds";
regulator-always-on;
};
ldo2_reg: regulator@4 {
reg = <4>;
/* 3.3V rail */
regulator-name = "vdd_3v3aux";
regulator-always-on;
};
ldo3_reg: regulator@5 {
reg = <5>;
/* VDD_3V3A 3.3V rail */
regulator-name = "vdd_3v3a";
regulator-min-microvolt = <3300000>;
@ -482,7 +473,6 @@ ldo3_reg: regulator@5 {
};
ldo4_reg: regulator@6 {
reg = <6>;
/* VDD_3V3B 3.3V rail */
regulator-name = "vdd_3v3b";
regulator-always-on;

4
arch/arm/boot/dts/am335x-shc.dts
View File

@ -46,7 +46,7 @@ back_button {
gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_BACK>;
debounce-interval = <1000>;
gpio-key,wakeup;
wakeup-source;
};
front_button {
@ -54,7 +54,7 @@ front_button {
gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_FRONT>;
debounce-interval = <1000>;
gpio-key,wakeup;
wakeup-source;
};
};

13
arch/arm/boot/dts/am335x-sl50.dts
View File

@ -375,19 +375,16 @@ &uart4 {
pinctrl-0 = <&uart4_pins>;
};
#include "tps65217.dtsi"
&tps {
compatible = "ti,tps65217";
ti,pmic-shutdown-controller;
interrupt-parent = <&intc>;
interrupts = <7>; /* NNMI */
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
/* VDDS_DDR */
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
@ -395,7 +392,6 @@ dcdc1_reg: regulator@0 {
};
dcdc2_reg: regulator@1 {
reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@ -405,7 +401,6 @@ dcdc2_reg: regulator@1 {
};
dcdc3_reg: regulator@2 {
reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@ -415,7 +410,6 @@ dcdc3_reg: regulator@2 {
};
ldo1_reg: regulator@3 {
reg = <3>;
/* VRTC / VIO / VDDS*/
regulator-always-on;
regulator-min-microvolt = <1800000>;
@ -423,7 +417,6 @@ ldo1_reg: regulator@3 {
};
ldo2_reg: regulator@4 {
reg = <4>;
/* VDD_3V3AUX */
regulator-always-on;
regulator-min-microvolt = <3300000>;
@ -431,7 +424,6 @@ ldo2_reg: regulator@4 {
};
ldo3_reg: regulator@5 {
reg = <5>;
/* VDD_1V8 */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@ -439,7 +431,6 @@ ldo3_reg: regulator@5 {
};
ldo4_reg: regulator@6 {
reg = <6>;
/* VDD_3V3A */
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;

1
arch/arm/boot/dts/am33xx.dtsi
View File

@ -439,6 +439,7 @@ mailbox: mailbox@480C8000 {
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <8>;
mbox_wkupm3: wkup_m3 {
ti,mbox-send-noirq;
ti,mbox-tx = <0 0 0>;
ti,mbox-rx = <0 0 3>;
};

5
arch/arm/boot/dts/am4372.dtsi
View File

@ -73,7 +73,7 @@ scu: scu@48240000 {
global_timer: timer@48240200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x48240200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
interrupt-parent = <&gic>;
clocks = <&mpu_periphclk>;
};
@ -81,7 +81,7 @@ global_timer: timer@48240200 {
local_timer: timer@48240600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x48240600 0x100>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
interrupt-parent = <&gic>;
clocks = <&mpu_periphclk>;
};
@ -290,6 +290,7 @@ mailbox: mailbox@480C8000 {
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <8>;
mbox_wkupm3: wkup_m3 {
ti,mbox-send-noirq;
ti,mbox-tx = <0 0 0>;
ti,mbox-rx = <0 0 3>;
};

4
arch/arm/boot/dts/am437x-gp-evm.dts
View File

@ -590,8 +590,6 @@ pixcir_ts@5c {
pinctrl-names = "default";
pinctrl-0 = <&pixcir_ts_pins>;
reg = <0x5c>;
interrupt-parent = <&gpio3>;
interrupts = <22 0>;
attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
@ -599,7 +597,7 @@ pixcir_ts@5c {
* 0x264 represents the offset of padconf register of
* gpio3_22 from am43xx_pinmux base.
*/
interrupts-extended = <&gpio3 22 IRQ_TYPE_NONE>,
interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>,
<&am43xx_pinmux 0x264>;
interrupt-names = "tsc", "wakeup";

2
arch/arm/boot/dts/am43x-epos-evm.dts
View File

@ -491,7 +491,7 @@ pixcir_ts@5c {
pinctrl-0 = <&pixcir_ts_pins>;
reg = <0x5c>;
interrupt-parent = <&gpio1>;
interrupts = <17 0>;
interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;

4
arch/arm/boot/dts/am57xx-beagle-x15.dts
View File

@ -173,6 +173,8 @@ simple-audio-card,cpu {
sound0_master: simple-audio-card,codec {
sound-dai = <&tlv320aic3104>;
assigned-clocks = <&clkoutmux2_clk_mux>;
assigned-clock-parents = <&sys_clk2_dclk_div>;
clocks = <&clkout2_clk>;
};
};
@ -796,6 +798,8 @@ &mcasp3 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mcasp3_pins_default>;
pinctrl-1 = <&mcasp3_pins_sleep>;
assigned-clocks = <&mcasp3_ahclkx_mux>;
assigned-clock-parents = <&sys_clkin2>;
status = "okay";
op-mode = <0>; /* MCASP_IIS_MODE */

14
arch/arm/boot/dts/am57xx-cl-som-am57x.dts
View File

@ -167,7 +167,7 @@ DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d19.rgmii1_rc
DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLUP | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
>;
};
@ -492,14 +492,14 @@ &qspi {
pinctrl-names = "default";
pinctrl-0 = <&qspi1_pins>;
spi-max-frequency = <20000000>;
spi-max-frequency = <48000000>;
spi_flash: spi_flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,m25p80", "jedec,spi-nor";
reg = <0>; /* CS0 */
spi-max-frequency = <20000000>;
spi-max-frequency = <48000000>;
partition@0 {
label = "uboot";
@ -545,7 +545,7 @@ ads7846@0 {
ti,debounce-tol = /bits/ 16 <10>;
ti,debounce-rep = /bits/ 16 <1>;
linux,wakeup;
wakeup-source;
};
};
@ -559,13 +559,13 @@ &mac {
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rgmii";
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <0>;
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rgmii";
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <1>;
};
@ -588,7 +588,7 @@ &usb1 {
};
&usb2 {
dr_mode = "peripheral";
dr_mode = "host";
};
&mcasp3 {

8
arch/arm/boot/dts/am57xx-sbc-am57x.dts
View File

@ -25,8 +25,8 @@ aliases {
&dra7_pmx_core {
uart3_pins_default: uart3_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
>;
};
@ -108,9 +108,9 @@ &i2c5 {
pinctrl-0 = <&i2c5_pins_default>;
clock-frequency = <400000>;
eeprom_base: atmel@50 {
eeprom_base: atmel@54 {
compatible = "atmel,24c08";
reg = <0x50>;
reg = <0x54>;
pagesize = <16>;
};

1
arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
View File

@ -152,6 +152,7 @@ nand@d0000 {
nand-on-flash-bbt;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;

12
arch/arm/boot/dts/at91-sama5d2_xplained.dts
View File

@ -114,9 +114,15 @@ m25p80@0 {
macb0: ethernet@f8008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_default>;
pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
phy-mode = "rmii";
status = "okay";
ethernet-phy@1 {
reg = <0x1>;
interrupt-parent = <&pioA>;
interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
};
};
pdmic@f8018000 {
@ -300,6 +306,10 @@ pinctrl_macb0_default: macb0_default {
bias-disable;
};
pinctrl_macb0_phy_irq: macb0_phy_irq {
pinmux = <PIN_PC9__GPIO>;
};
pinctrl_pdmic_default: pdmic_default {
pinmux = <PIN_PB26__PDMIC_DAT>,
<PIN_PB27__PDMIC_CLK>;

8
arch/arm/boot/dts/at91-sama5d4_xplained.dts
View File

@ -86,10 +86,12 @@ i2c0: i2c@f8014000 {
macb0: ethernet@f8020000 {
phy-mode = "rmii";
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
phy0: ethernet-phy@1 {
interrupt-parent = <&pioE>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
reg = <1>;
};
};
@ -152,6 +154,10 @@ pinctrl_key_gpio: key_gpio_0 {
atmel,pins =
<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
};
pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
atmel,pins =
<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
};
};
};
};

11
arch/arm/boot/dts/at91-sama5d4ek.dts
View File

@ -160,8 +160,15 @@ atmel_mxt_ts@4c {
};
macb0: ethernet@f8020000 {
pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
phy-mode = "rmii";
status = "okay";
ethernet-phy@1 {
reg = <0x1>;
interrupt-parent = <&pioE>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
};
};
mmc1: mmc@fc000000 {
@ -193,6 +200,10 @@ watchdog@fc068640 {
pinctrl@fc06a000 {
board {
pinctrl_macb0_phy_irq: macb0_phy_irq {
atmel,pins =
<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
pinctrl_mmc0_cd: mmc0_cd {
atmel,pins =
<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;

2
arch/arm/boot/dts/at91sam9n12ek.dts
View File

@ -215,7 +215,7 @@ enter {
};
panel: panel {
compatible = "qd,qd43003c0-40", "simple-panel";
compatible = "qiaodian,qd43003c0-40", "simple-panel";
backlight = <&backlight>;
power-supply = <&panel_reg>;
#address-cells = <1>;

1
arch/arm/boot/dts/imx6qdl.dtsi
View File

@ -896,7 +896,6 @@ crypto: caam@2100000 {
#size-cells = <1>;
reg = <0x2100000 0x10000>;
ranges = <0 0x2100000 0x10000>;
interrupt-parent = <&intc>;
clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
<&clks IMX6QDL_CLK_CAAM_ACLK>,
<&clks IMX6QDL_CLK_CAAM_IPG>,

2
arch/arm/boot/dts/kirkwood-ds112.dts
View File

@ -14,7 +14,7 @@
#include "kirkwood-synology.dtsi"
/ {
model = "Synology DS111";
model = "Synology DS112";
compatible = "synology,ds111", "marvell,kirkwood";
memory {

25
arch/arm/boot/dts/kirkwood-lswvl.dts
View File

@ -1,7 +1,8 @@
/*
* Device Tree file for Buffalo Linkstation LS-WVL/VL
*
* Copyright (C) 2015, rogershimizu@gmail.com
* Copyright (C) 2015, 2016
* Roger Shimizu <rogershimizu@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@ -156,21 +157,21 @@ gpio_keys {
button@1 {
label = "Function Button";
linux,code = <KEY_OPTION>;
gpios = <&gpio0 45 GPIO_ACTIVE_LOW>;
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
};
button@2 {
label = "Power-on Switch";
linux,code = <KEY_RESERVED>;
linux,input-type = <5>;
gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
button@3 {
label = "Power-auto Switch";
linux,code = <KEY_ESC>;
linux,input-type = <5>;
gpios = <&gpio0 47 GPIO_ACTIVE_LOW>;
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
};
@ -185,38 +186,38 @@ &pmx_led_hdderr0
led@1 {
label = "lswvl:red:alarm";
gpios = <&gpio0 36 GPIO_ACTIVE_LOW>;
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
};
led@2 {
label = "lswvl:red:func";
gpios = <&gpio0 37 GPIO_ACTIVE_LOW>;
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
};
led@3 {
label = "lswvl:amber:info";
gpios = <&gpio0 38 GPIO_ACTIVE_LOW>;
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
};
led@4 {
label = "lswvl:blue:func";
gpios = <&gpio0 39 GPIO_ACTIVE_LOW>;
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
led@5 {
label = "lswvl:blue:power";
gpios = <&gpio0 40 GPIO_ACTIVE_LOW>;
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
led@6 {
label = "lswvl:red:hdderr0";
gpios = <&gpio0 34 GPIO_ACTIVE_LOW>;
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
};
led@7 {
label = "lswvl:red:hdderr1";
gpios = <&gpio0 35 GPIO_ACTIVE_LOW>;
gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
};
};
@ -233,7 +234,7 @@ gpio_fan {
3250 1
5000 0>;
alarm-gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
restart_poweroff {

31
arch/arm/boot/dts/kirkwood-lswxl.dts
View File

@ -1,7 +1,8 @@
/*
* Device Tree file for Buffalo Linkstation LS-WXL/WSXL
*
* Copyright (C) 2015, rogershimizu@gmail.com
* Copyright (C) 2015, 2016
* Roger Shimizu <rogershimizu@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@ -156,21 +157,21 @@ gpio_keys {
button@1 {
label = "Function Button";
linux,code = <KEY_OPTION>;
gpios = <&gpio1 41 GPIO_ACTIVE_LOW>;
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
button@2 {
label = "Power-on Switch";
linux,code = <KEY_RESERVED>;
linux,input-type = <5>;
gpios = <&gpio1 42 GPIO_ACTIVE_LOW>;
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
button@3 {
label = "Power-auto Switch";
linux,code = <KEY_ESC>;
linux,input-type = <5>;
gpios = <&gpio1 43 GPIO_ACTIVE_LOW>;
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
};
@ -185,12 +186,12 @@ &pmx_led_hdderr0
led@1 {
label = "lswxl:blue:func";
gpios = <&gpio1 36 GPIO_ACTIVE_LOW>;
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
led@2 {
label = "lswxl:red:alarm";
gpios = <&gpio1 49 GPIO_ACTIVE_LOW>;
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
led@3 {
@ -200,23 +201,23 @@ led@3 {
led@4 {
label = "lswxl:blue:power";
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
led@5 {
label = "lswxl:red:func";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
default-state = "keep";
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
};
led@6 {
label = "lswxl:red:hdderr0";
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
};
led@7 {
label = "lswxl:red:hdderr1";
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
};
@ -225,15 +226,15 @@ gpio_fan {
pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
pinctrl-names = "default";
gpios = <&gpio0 47 GPIO_ACTIVE_LOW
&gpio0 48 GPIO_ACTIVE_LOW>;
gpios = <&gpio1 16 GPIO_ACTIVE_LOW
&gpio1 15 GPIO_ACTIVE_LOW>;
gpio-fan,speed-map = <0 3
1500 2
3250 1
5000 0>;
alarm-gpios = <&gpio1 49 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
restart_poweroff {
@ -256,7 +257,7 @@ usb_power: regulator@1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 37 GPIO_ACTIVE_HIGH>;
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
};
hdd_power0: regulator@2 {
compatible = "regulator-fixed";

1
arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
View File

@ -131,6 +131,7 @@ &nand {
chip-delay = <40>;
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;

9
arch/arm/boot/dts/logicpd-torpedo-som.dtsi
View File

@ -112,14 +112,6 @@ &i2c3 {
clock-frequency = <400000>;
};
&i2c2 {
clock-frequency = <400000>;
};
&i2c3 {
clock-frequency = <400000>;
};
/*
* Only found on the wireless SOM. For the SOM without wireless, the pins for
* MMC3 can be routed with jumpers to the second MMC slot on the devkit and
@ -143,6 +135,7 @@ wlcore: wlcore@2 {
interrupt-parent = <&gpio5>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
ref-clock-frequency = <26000000>;
tcxo-clock-frequency = <26000000>;
};
};

33
arch/arm/boot/dts/omap5-board-common.dtsi
View File

@ -130,6 +130,16 @@ sound: sound {
};
};
&gpio8 {
/* TI trees use GPIO instead of msecure, see also muxing */
p234 {
gpio-hog;
gpios = <10 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "gpio8_234/msecure";
};
};
&omap5_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
@ -213,6 +223,13 @@ OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */
>;
};
/* TI trees use GPIO mode; msecure mode does not work reliably? */
palmas_msecure_pins: palmas_msecure_pins {
pinctrl-single,pins = <
OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
>;
};
usbhost_pins: pinmux_usbhost_pins {
pinctrl-single,pins = <
OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
@ -278,6 +295,12 @@ &omap5_pmx_wkup {
&usbhost_wkup_pins
>;
palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
pinctrl-single,pins = <
OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */
>;
};
usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
pinctrl-single,pins = <
OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
@ -345,6 +368,8 @@ palmas: palmas@48 {
interrupt-controller;
#interrupt-cells = <2>;
ti,system-power-controller;
pinctrl-names = "default";
pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
extcon_usb3: palmas_usb {
compatible = "ti,palmas-usb-vid";
@ -358,6 +383,14 @@ clk32kgaudio: palmas_clk32k@1 {
#clock-cells = <0>;
};
rtc {
compatible = "ti,palmas-rtc";
interrupt-parent = <&palmas>;
interrupts = <8 IRQ_TYPE_NONE>;
ti,backup-battery-chargeable;
ti,backup-battery-charge-high-current;
};
palmas_pmic {
compatible = "ti,palmas-pmic";
interrupt-parent = <&palmas>;

39
arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
View File

@ -1,7 +1,8 @@
/*
* Device Tree file for Buffalo Linkstation LS-WTGL
*
* Copyright (C) 2015, Roger Shimizu <rogershimizu@gmail.com>
* Copyright (C) 2015, 2016
* Roger Shimizu <rogershimizu@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@ -69,8 +70,6 @@ soc {
internal-regs {
pinctrl: pinctrl@10000 {
pinctrl-0 = <&pmx_usb_power &pmx_power_hdd
&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
pinctrl-names = "default";
pmx_led_power: pmx-leds {
@ -162,6 +161,7 @@ gpio_leds {
led@1 {
label = "lswtgl:blue:power";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
led@2 {
@ -188,7 +188,7 @@ gpio_fan {
3250 1
5000 0>;
alarm-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
restart_poweroff {
@ -228,6 +228,37 @@ hdd_power: regulator@2 {
};
};
&devbus_bootcs {
status = "okay";
devbus,keep-config;
flash@0 {
compatible = "jedec-flash";
reg = <0 0x40000>;
bank-width = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
header@0 {
reg = <0 0x30000>;
read-only;
};
uboot@30000 {
reg = <0x30000 0xF000>;
read-only;
};
uboot_env@3F000 {
reg = <0x3F000 0x1000>;
};
};
};
};
&mdio {
status = "okay";

2
arch/arm/boot/dts/sama5d2-pinfunc.h
View File

@ -90,7 +90,7 @@
#define PIN_PA14__I2SC1_MCK PINMUX_PIN(PIN_PA14, 4, 2)
#define PIN_PA14__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA14, 5, 1)
#define PIN_PA14__D9 PINMUX_PIN(PIN_PA14, 6, 2)
#define PIN_PA15 14
#define PIN_PA15 15
#define PIN_PA15__GPIO PINMUX_PIN(PIN_PA15, 0, 0)
#define PIN_PA15__SPI0_MOSI PINMUX_PIN(PIN_PA15, 1, 1)
#define PIN_PA15__TF1 PINMUX_PIN(PIN_PA15, 2, 1)

2
arch/arm/boot/dts/sama5d4.dtsi
View File

@ -1342,7 +1342,7 @@ rtc@fc0686b0 {
dbgu: serial@fc069000 {
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfc069000 0x200>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
clocks = <&dbgu_clk>;

37
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
View File

@ -127,22 +127,14 @@ mmcsd_default_mux {
};
mmcsd_default_mode: mmcsd_default {
mmcsd_default_cfg1 {
/* MCCLK */
pins = "GPIO8_B10";
ste,output = <0>;
};
mmcsd_default_cfg2 {
/* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */
pins = "GPIO10_C11", "GPIO15_A12",
"GPIO16_C13", "GPIO23_D15";
ste,output = <1>;
};
mmcsd_default_cfg3 {
/* MCCMD, MCDAT3-0, MCMSFBCLK */
pins = "GPIO9_A10", "GPIO11_B11",
"GPIO12_A11", "GPIO13_C12",
"GPIO14_B12", "GPIO24_C15";
ste,input = <1>;
/*
* MCCLK, MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2
* MCCMD, MCDAT3-0, MCMSFBCLK
*/
pins = "GPIO8_B10", "GPIO9_A10", "GPIO10_C11", "GPIO11_B11",
"GPIO12_A11", "GPIO13_C12", "GPIO14_B12", "GPIO15_A12",
"GPIO16_C13", "GPIO23_D15", "GPIO24_C15";
ste,output = <2>;
};
};
};
@ -802,10 +794,21 @@ mmcsd: sdi@101f6000 {
clock-names = "mclk", "apb_pclk";
interrupt-parent = <&vica>;
interrupts = <22>;
max-frequency = <48000000>;
max-frequency = <400000>;
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
full-pwr-cycle;
/*
* The STw4811 circuit used with the Nomadik strictly
* requires that all of these signal direction pins be
* routed and used for its 4-bit levelshifter.
*/
st,sig-dir-dat0;
st,sig-dir-dat2;
st,sig-dir-dat31;
st,sig-dir-cmd;
st,sig-pin-fbclk;
pinctrl-names = "default";
pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
vmmc-supply = <&vmmc_regulator>;

56
arch/arm/boot/dts/tps65217.dtsi Normal file
View File

@ -0,0 +1,56 @@
/*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Integrated Power Management Chip
* http://www.ti.com/lit/ds/symlink/tps65217.pdf
*/
&tps {
compatible = "ti,tps65217";
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
regulator-compatible = "dcdc1";
};
dcdc2_reg: regulator@1 {
reg = <1>;
regulator-compatible = "dcdc2";
};
dcdc3_reg: regulator@2 {
reg = <2>;
regulator-compatible = "dcdc3";
};
ldo1_reg: regulator@3 {
reg = <3>;
regulator-compatible = "ldo1";
};
ldo2_reg: regulator@4 {
reg = <4>;
regulator-compatible = "ldo2";
};
ldo3_reg: regulator@5 {
reg = <5>;
regulator-compatible = "ldo3";
};
ldo4_reg: regulator@6 {
reg = <6>;
regulator-compatible = "ldo4";
};
};
};

9
arch/arm/common/icst.c
View File

@ -16,7 +16,7 @@
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <asm/div64.h>
#include <asm/hardware/icst.h>
/*
@ -29,7 +29,11 @@ EXPORT_SYMBOL(icst525_s2div);
unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco)
{
return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]);
u64 dividend = p->ref * 2 * (u64)(vco.v + 8);
u32 divisor = (vco.r + 2) * p->s2div[vco.s];
do_div(dividend, divisor);
return (unsigned long)dividend;
}
EXPORT_SYMBOL(icst_hz);
@ -58,6 +62,7 @@ icst_hz_to_vco(const struct icst_params *p, unsigned long freq)
if (f > p->vco_min && f <= p->vco_max)
break;
i++;
} while (i < 8);
if (i >= 8)

1
arch/arm/configs/multi_v7_defconfig
View File

@ -426,6 +426,7 @@ CONFIG_SUNXI_WATCHDOG=y
CONFIG_IMX2_WDT=y
CONFIG_TEGRA_WATCHDOG=m
CONFIG_MESON_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
CONFIG_DIGICOLOR_WATCHDOG=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y

43
arch/arm/configs/omap2plus_defconfig
View File

@ -50,6 +50,7 @@ CONFIG_SOC_AM33XX=y
CONFIG_SOC_AM43XX=y
CONFIG_SOC_DRA7XX=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_KERNMEM_PERMS=y
CONFIG_ARM_ERRATA_411920=y
CONFIG_ARM_ERRATA_430973=y
CONFIG_SMP=y
@ -177,6 +178,7 @@ CONFIG_TI_CPTS=y
CONFIG_AT803X_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_USB_USBNET=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
@ -290,24 +292,23 @@ CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_OMAP2_DSS=m
CONFIG_OMAP5_DSS_HDMI=y
CONFIG_OMAP2_DSS_SDI=y
CONFIG_OMAP2_DSS_DSI=y
CONFIG_FB_OMAP5_DSS_HDMI=y
CONFIG_FB_OMAP2_DSS_SDI=y
CONFIG_FB_OMAP2_DSS_DSI=y
CONFIG_FB_OMAP2=m
CONFIG_DISPLAY_ENCODER_TFP410=m
CONFIG_DISPLAY_ENCODER_TPD12S015=m
CONFIG_DISPLAY_CONNECTOR_DVI=m
CONFIG_DISPLAY_CONNECTOR_HDMI=m
CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m
CONFIG_DISPLAY_PANEL_DPI=m
CONFIG_DISPLAY_PANEL_DSI_CM=m
CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m
CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m
CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m
CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m
CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m
CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m
CONFIG_FB_OMAP2_ENCODER_TFP410=m
CONFIG_FB_OMAP2_ENCODER_TPD12S015=m
CONFIG_FB_OMAP2_CONNECTOR_DVI=m
CONFIG_FB_OMAP2_CONNECTOR_HDMI=m
CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m
CONFIG_FB_OMAP2_PANEL_DPI=m
CONFIG_FB_OMAP2_PANEL_DSI_CM=m
CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m
CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m
CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m
CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m
CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m
CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
@ -354,6 +355,11 @@ CONFIG_USB_MUSB_DSPS=m
CONFIG_USB_INVENTRA_DMA=y
CONFIG_USB_TI_CPPI41_DMA=y
CONFIG_USB_DWC3=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_TEST=m
CONFIG_AM335X_PHY_USB=y
CONFIG_USB_GADGET=m
@ -387,6 +393,7 @@ CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_PWM=m
CONFIG_LEDS_PCA963X=m
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
@ -449,6 +456,8 @@ CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_SPLIT=y
CONFIG_DEBUG_INFO_DWARF4=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y

4
arch/arm/crypto/aes-ce-glue.c
View File

@ -364,7 +364,7 @@ static struct crypto_alg aes_algs[] = { {
.cra_blkcipher = {
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
.ivsize = AES_BLOCK_SIZE,
.ivsize = 0,
.setkey = ce_aes_setkey,
.encrypt = ecb_encrypt,
.decrypt = ecb_decrypt,
@ -441,7 +441,7 @@ static struct crypto_alg aes_algs[] = { {
.cra_ablkcipher = {
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
.ivsize = AES_BLOCK_SIZE,
.ivsize = 0,
.setkey = ablk_set_key,
.encrypt = ablk_encrypt,
.decrypt = ablk_decrypt,

1
arch/arm/include/asm/arch_gicv3.h
View File

@ -117,6 +117,7 @@ static inline u32 gic_read_iar(void)
u32 irqstat;
asm volatile("mrc " __stringify(ICC_IAR1) : "=r" (irqstat));
dsb(sy);
return irqstat;
}

21
arch/arm/include/asm/xen/page-coherent.h
View File

@ -35,14 +35,21 @@ static inline void xen_dma_map_page(struct device *hwdev, struct page *page,
dma_addr_t dev_addr, unsigned long offset, size_t size,
enum dma_data_direction dir, struct dma_attrs *attrs)
{
bool local = XEN_PFN_DOWN(dev_addr) == page_to_xen_pfn(page);
unsigned long page_pfn = page_to_xen_pfn(page);
unsigned long dev_pfn = XEN_PFN_DOWN(dev_addr);
unsigned long compound_pages =
(1<<compound_order(page)) * XEN_PFN_PER_PAGE;
bool local = (page_pfn <= dev_pfn) &&
(dev_pfn - page_pfn < compound_pages);
/*
* Dom0 is mapped 1:1, while the Linux page can be spanned accross
* multiple Xen page, it's not possible to have a mix of local and
* foreign Xen page. So if the first xen_pfn == mfn the page is local
* otherwise it's a foreign page grant-mapped in dom0. If the page is
* local we can safely call the native dma_ops function, otherwise we
* call the xen specific function.
* Dom0 is mapped 1:1, while the Linux page can span across
* multiple Xen pages, it's not possible for it to contain a
* mix of local and foreign Xen pages. So if the first xen_pfn
* == mfn the page is local otherwise it's a foreign page
* grant-mapped in dom0. If the page is local we can safely
* call the native dma_ops function, otherwise we call the xen
* specific function.
*/
if (local)
__generic_dma_ops(hwdev)->map_page(hwdev, page, offset, size, dir, attrs);

3
arch/arm/kvm/mmio.c
View File

@ -206,7 +206,8 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run,
run->mmio.is_write = is_write;
run->mmio.phys_addr = fault_ipa;
run->mmio.len = len;
memcpy(run->mmio.data, data_buf, len);
if (is_write)
memcpy(run->mmio.data, data_buf, len);
if (!ret) {
/* We handled the access successfully in the kernel. */

22
arch/arm/mach-omap2/board-generic.c
View File

@ -18,6 +18,7 @@
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/system_info.h>
#include "common.h"
@ -77,12 +78,31 @@ static const char *const n900_boards_compat[] __initconst = {
NULL,
};
/* Set system_rev from atags */
static void __init rx51_set_system_rev(const struct tag *tags)
{
const struct tag *tag;
if (tags->hdr.tag != ATAG_CORE)
return;
for_each_tag(tag, tags) {
if (tag->hdr.tag == ATAG_REVISION) {
system_rev = tag->u.revision.rev;
break;
}
}
}
/* Legacy userspace on Nokia N900 needs ATAGS exported in /proc/atags,
* save them while the data is still not overwritten
*/
static void __init rx51_reserve(void)
{
save_atags((const struct tag *)(PAGE_OFFSET + 0x100));
const struct tag *tags = (const struct tag *)(PAGE_OFFSET + 0x100);
save_atags(tags);
rx51_set_system_rev(tags);
omap_reserve();
}

28
arch/arm/mach-omap2/devices.c
View File

@ -18,7 +18,6 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/mailbox-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
@ -66,32 +65,6 @@ static int __init omap3_l3_init(void)
}
omap_postcore_initcall(omap3_l3_init);
#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE)
static inline void __init omap_init_mbox(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
struct omap_mbox_pdata *pdata;
oh = omap_hwmod_lookup("mailbox");
if (!oh) {
pr_err("%s: unable to find hwmod\n", __func__);
return;
}
if (!oh->dev_attr) {
pr_err("%s: hwmod doesn't have valid attrs\n", __func__);
return;
}
pdata = (struct omap_mbox_pdata *)oh->dev_attr;
pdev = omap_device_build("omap-mailbox", -1, oh, pdata, sizeof(*pdata));
WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
__func__, PTR_ERR(pdev));
}
#else
static inline void omap_init_mbox(void) { }
#endif /* CONFIG_OMAP2PLUS_MBOX */
static inline void omap_init_sti(void) {}
#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
@ -229,7 +202,6 @@ static int __init omap2_init_devices(void)
* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
omap_init_mbox();
omap_init_mcspi();
omap_init_sham();
omap_init_aes();

6
arch/arm/mach-omap2/gpmc-onenand.c
View File

@ -101,10 +101,8 @@ static void omap2_onenand_set_async_mode(void __iomem *onenand_base)
static void set_onenand_cfg(void __iomem *onenand_base)
{
u32 reg;
u32 reg = ONENAND_SYS_CFG1_RDY | ONENAND_SYS_CFG1_INT;
reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
ONENAND_SYS_CFG1_BL_16;
if (onenand_flags & ONENAND_FLAG_SYNCREAD)
@ -123,6 +121,7 @@ static void set_onenand_cfg(void __iomem *onenand_base)
reg |= ONENAND_SYS_CFG1_VHF;
else
reg &= ~ONENAND_SYS_CFG1_VHF;
writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
}
@ -289,6 +288,7 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
}
}
onenand_async.sync_write = true;
omap2_onenand_calc_async_timings(&t);
ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async);

14
arch/arm/mach-omap2/omap_device.c
View File

@ -191,12 +191,22 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
{
struct platform_device *pdev = to_platform_device(dev);
struct omap_device *od;
int err;
switch (event) {
case BUS_NOTIFY_DEL_DEVICE:
if (pdev->archdata.od)
omap_device_delete(pdev->archdata.od);
break;
case BUS_NOTIFY_UNBOUND_DRIVER:
od = to_omap_device(pdev);
if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED)) {
dev_info(dev, "enabled after unload, idling\n");
err = omap_device_idle(pdev);
if (err)
dev_err(dev, "failed to idle\n");
}
break;
case BUS_NOTIFY_ADD_DEVICE:
if (pdev->dev.of_node)
omap_device_build_from_dt(pdev);
@ -602,8 +612,10 @@ static int _od_runtime_resume(struct device *dev)
int ret;
ret = omap_device_enable(pdev);
if (ret)
if (ret) {
dev_err(dev, "use pm_runtime_put_sync_suspend() in driver?\n");
return ret;
}
return pm_generic_runtime_resume(dev);
}

23
arch/arm/mach-omap2/pdata-quirks.c
View File

@ -23,6 +23,8 @@
#include <linux/platform_data/pinctrl-single.h>
#include <linux/platform_data/iommu-omap.h>
#include <linux/platform_data/wkup_m3.h>
#include <linux/platform_data/pwm_omap_dmtimer.h>
#include <plat/dmtimer.h>
#include "common.h"
#include "common-board-devices.h"
@ -449,6 +451,24 @@ void omap_auxdata_legacy_init(struct device *dev)
dev->platform_data = &twl_gpio_auxdata;
}
/* Dual mode timer PWM callbacks platdata */
#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
.request_by_node = omap_dm_timer_request_by_node,
.free = omap_dm_timer_free,
.enable = omap_dm_timer_enable,
.disable = omap_dm_timer_disable,
.get_fclk = omap_dm_timer_get_fclk,
.start = omap_dm_timer_start,
.stop = omap_dm_timer_stop,
.set_load = omap_dm_timer_set_load,
.set_match = omap_dm_timer_set_match,
.set_pwm = omap_dm_timer_set_pwm,
.set_prescaler = omap_dm_timer_set_prescaler,
.write_counter = omap_dm_timer_write_counter,
};
#endif
/*
* Few boards still need auxdata populated before we populate
* the dev entries in of_platform_populate().
@ -502,6 +522,9 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
&wkup_m3_data),
#endif
#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata),
#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
&omap4_iommu_pdata),

61
arch/arm/mach-omap2/sleep34xx.S
View File

@ -86,13 +86,18 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
stmfd sp!, {lr} @ save registers on stack
/* Setup so that we will disable and enable l2 */
mov r1, #0x1
adrl r2, l2dis_3630 @ may be too distant for plain adr
str r1, [r2]
adrl r3, l2dis_3630_offset @ may be too distant for plain adr
ldr r2, [r3] @ value for offset
str r1, [r2, r3] @ write to l2dis_3630
ldmfd sp!, {pc} @ restore regs and return
ENDPROC(enable_omap3630_toggle_l2_on_restore)
.text
/* Function to call rom code to save secure ram context */
/*
* Function to call rom code to save secure ram context. This gets
* relocated to SRAM, so it can be all in .data section. Otherwise
* we need to initialize api_params separately.
*/
.data
.align 3
ENTRY(save_secure_ram_context)
stmfd sp!, {r4 - r11, lr} @ save registers on stack
@ -126,6 +131,8 @@ ENDPROC(save_secure_ram_context)
ENTRY(save_secure_ram_context_sz)
.word . - save_secure_ram_context
.text
/*
* ======================
* == Idle entry point ==
@ -289,12 +296,6 @@ wait_sdrc_ready:
bic r5, r5, #0x40
str r5, [r4]
/*
* PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
* base instead.
* Be careful not to clobber r7 when maintaing this code.
*/
is_dll_in_lock_mode:
/* Is dll in lock mode? */
ldr r4, sdrc_dlla_ctrl
@ -302,11 +303,7 @@ is_dll_in_lock_mode:
tst r5, #0x4
bne exit_nonoff_modes @ Return if locked
/* wait till dll locks */
adr r7, kick_counter
wait_dll_lock_timed:
ldr r4, wait_dll_lock_counter
add r4, r4, #1
str r4, [r7, #wait_dll_lock_counter - kick_counter]
ldr r4, sdrc_dlla_status
/* Wait 20uS for lock */
mov r6, #8
@ -330,9 +327,6 @@ kick_dll:
orr r6, r6, #(1<<3) @ enable dll
str r6, [r4]
dsb
ldr r4, kick_counter
add r4, r4, #1
str r4, [r7] @ kick_counter
b wait_dll_lock_timed
exit_nonoff_modes:
@ -360,15 +354,6 @@ sdrc_dlla_status:
.word SDRC_DLLA_STATUS_V
sdrc_dlla_ctrl:
.word SDRC_DLLA_CTRL_V
/*
* When exporting to userspace while the counters are in SRAM,
* these 2 words need to be at the end to facilitate retrival!
*/
kick_counter:
.word 0
wait_dll_lock_counter:
.word 0
ENTRY(omap3_do_wfi_sz)
.word . - omap3_do_wfi
@ -437,7 +422,9 @@ ENTRY(omap3_restore)
cmp r2, #0x0 @ Check if target power state was OFF or RET
bne logic_l1_restore
ldr r0, l2dis_3630
adr r1, l2dis_3630_offset @ address for offset
ldr r0, [r1] @ value for offset
ldr r0, [r1, r0] @ value at l2dis_3630
cmp r0, #0x1 @ should we disable L2 on 3630?
bne skipl2dis
mrc p15, 0, r0, c1, c0, 1
@ -449,12 +436,14 @@ skipl2dis:
and r1, #0x700
cmp r1, #0x300
beq l2_inv_gp
adr r0, l2_inv_api_params_offset
ldr r3, [r0]
add r3, r3, r0 @ r3 points to dummy parameters
mov r0, #40 @ set service ID for PPA
mov r12, r0 @ copy secure Service ID in r12
mov r1, #0 @ set task id for ROM code in r1
mov r2, #4 @ set some flags in r2, r6
mov r6, #0xff
adr r3, l2_inv_api_params @ r3 points to dummy parameters
dsb @ data write barrier
dmb @ data memory barrier
smc #1 @ call SMI monitor (smi #1)
@ -488,8 +477,8 @@ skipl2dis:
b logic_l1_restore
.align
l2_inv_api_params:
.word 0x1, 0x00
l2_inv_api_params_offset:
.long l2_inv_api_params - .
l2_inv_gp:
/* Execute smi to invalidate L2 cache */
mov r12, #0x1 @ set up to invalidate L2
@ -506,7 +495,9 @@ l2_inv_gp:
mov r12, #0x2
smc #0 @ Call SMI monitor (smieq)
logic_l1_restore:
ldr r1, l2dis_3630
adr r0, l2dis_3630_offset @ adress for offset
ldr r1, [r0] @ value for offset
ldr r1, [r0, r1] @ value at l2dis_3630
cmp r1, #0x1 @ Test if L2 re-enable needed on 3630
bne skipl2reen
mrc p15, 0, r1, c1, c0, 1
@ -535,9 +526,17 @@ control_stat:
.word CONTROL_STAT
control_mem_rta:
.word CONTROL_MEM_RTA_CTRL
l2dis_3630_offset:
.long l2dis_3630 - .
.data
l2dis_3630:
.word 0
.data
l2_inv_api_params:
.word 0x1, 0x00
/*
* Internal functions
*/

25
arch/arm/mach-omap2/sleep44xx.S
View File

@ -29,12 +29,6 @@
dsb
.endm
ppa_zero_params:
.word 0x0
ppa_por_params:
.word 1, 0
#ifdef CONFIG_ARCH_OMAP4
/*
@ -266,7 +260,9 @@ ENTRY(omap4_cpu_resume)
beq skip_ns_smp_enable
ppa_actrl_retry:
mov r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX
adr r3, ppa_zero_params @ Pointer to parameters
adr r1, ppa_zero_params_offset
ldr r3, [r1]
add r3, r3, r1 @ Pointer to ppa_zero_params
mov r1, #0x0 @ Process ID
mov r2, #0x4 @ Flag
mov r6, #0xff
@ -303,7 +299,9 @@ skip_ns_smp_enable:
ldr r0, =OMAP4_PPA_L2_POR_INDEX
ldr r1, =OMAP44XX_SAR_RAM_BASE
ldr r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET]
adr r3, ppa_por_params
adr r1, ppa_por_params_offset
ldr r3, [r1]
add r3, r3, r1 @ Pointer to ppa_por_params
str r4, [r3, #0x04]
mov r1, #0x0 @ Process ID
mov r2, #0x4 @ Flag
@ -328,6 +326,8 @@ skip_l2en:
#endif
b cpu_resume @ Jump to generic resume
ppa_por_params_offset:
.long ppa_por_params - .
ENDPROC(omap4_cpu_resume)
#endif /* CONFIG_ARCH_OMAP4 */
@ -380,4 +380,13 @@ ENTRY(omap_do_wfi)
nop
ldmfd sp!, {pc}
ppa_zero_params_offset:
.long ppa_zero_params - .
ENDPROC(omap_do_wfi)
.data
ppa_zero_params:
.word 0
ppa_por_params:
.word 1, 0

3
arch/arm/mach-realview/Kconfig
View File

@ -1,5 +1,6 @@
menuconfig ARCH_REALVIEW
bool "ARM Ltd. RealView family" if ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
bool "ARM Ltd. RealView family"
depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
select ARM_AMBA
select ARM_TIMER_SP804
select COMMON_CLK_VERSATILE

2
arch/arm/mach-realview/platsmp-dt.c
View File

@ -80,7 +80,7 @@ static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
virt_to_phys(versatile_secondary_startup));
}
struct smp_operations realview_dt_smp_ops __initdata = {
static const struct smp_operations realview_dt_smp_ops __initconst = {
.smp_prepare_cpus = realview_smp_prepare_cpus,
.smp_secondary_init = versatile_secondary_init,
.smp_boot_secondary = versatile_boot_secondary,

1
arch/arm/mach-shmobile/common.h
View File

@ -4,7 +4,6 @@
extern void shmobile_init_delay(void);
extern void shmobile_boot_vector(void);
extern unsigned long shmobile_boot_fn;
extern unsigned long shmobile_boot_arg;
extern unsigned long shmobile_boot_size;
extern void shmobile_smp_boot(void);
extern void shmobile_smp_sleep(void);

6
arch/arm/mach-shmobile/headsmp-scu.S
View File

@ -38,9 +38,3 @@ ENTRY(shmobile_boot_scu)
b secondary_startup
ENDPROC(shmobile_boot_scu)
.text
.align 2
.globl shmobile_scu_base
shmobile_scu_base:
.space 4

28
arch/arm/mach-shmobile/headsmp.S
View File

@ -24,7 +24,6 @@
.arm
.align 12
ENTRY(shmobile_boot_vector)
ldr r0, 2f
ldr r1, 1f
bx r1
@ -34,9 +33,6 @@ ENDPROC(shmobile_boot_vector)
.globl shmobile_boot_fn
shmobile_boot_fn:
1: .space 4
.globl shmobile_boot_arg
shmobile_boot_arg:
2: .space 4
.globl shmobile_boot_size
shmobile_boot_size:
.long . - shmobile_boot_vector
@ -46,13 +42,15 @@ shmobile_boot_size:
*/
ENTRY(shmobile_smp_boot)
@ r0 = MPIDR_HWID_BITMASK
mrc p15, 0, r1, c0, c0, 5 @ r1 = MPIDR
and r0, r1, r0 @ r0 = cpu_logical_map() value
and r0, r1, #0xffffff @ MPIDR_HWID_BITMASK
@ r0 = cpu_logical_map() value
mov r1, #0 @ r1 = CPU index
adr r5, 1f @ array of per-cpu mpidr values
adr r6, 2f @ array of per-cpu functions
adr r7, 3f @ array of per-cpu arguments
adr r2, 1f
ldmia r2, {r5, r6, r7}
add r5, r5, r2 @ array of per-cpu mpidr values
add r6, r6, r2 @ array of per-cpu functions
add r7, r7, r2 @ array of per-cpu arguments
shmobile_smp_boot_find_mpidr:
ldr r8, [r5, r1, lsl #2]
@ -80,12 +78,18 @@ ENTRY(shmobile_smp_sleep)
b shmobile_smp_boot
ENDPROC(shmobile_smp_sleep)
.align 2
1: .long shmobile_smp_mpidr - .
.long shmobile_smp_fn - 1b
.long shmobile_smp_arg - 1b
.bss
.globl shmobile_smp_mpidr
shmobile_smp_mpidr:
1: .space NR_CPUS * 4
.space NR_CPUS * 4
.globl shmobile_smp_fn
shmobile_smp_fn:
2: .space NR_CPUS * 4
.space NR_CPUS * 4
.globl shmobile_smp_arg
shmobile_smp_arg:
3: .space NR_CPUS * 4
.space NR_CPUS * 4

1
arch/arm/mach-shmobile/platsmp-apmu.c
View File

@ -123,7 +123,6 @@ void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
{
/* install boot code shared by all CPUs */
shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
shmobile_boot_arg = MPIDR_HWID_BITMASK;
/* perform per-cpu setup */
apmu_parse_cfg(apmu_init_cpu, apmu_config, num);

4
arch/arm/mach-shmobile/platsmp-scu.c
View File

@ -17,6 +17,9 @@
#include <asm/smp_scu.h>
#include "common.h"
void __iomem *shmobile_scu_base;
static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb,
unsigned long action, void *hcpu)
{
@ -41,7 +44,6 @@ void __init shmobile_smp_scu_prepare_cpus(unsigned int max_cpus)
{
/* install boot code shared by all CPUs */
shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
shmobile_boot_arg = MPIDR_HWID_BITMASK;
/* enable SCU and cache coherency on booting CPU */
scu_enable(shmobile_scu_base);

2
arch/arm/mach-shmobile/smp-r8a7779.c
View File

@ -92,8 +92,6 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
{
/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
__raw_writel(__pa(shmobile_boot_vector), AVECR);
shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
shmobile_boot_arg = (unsigned long)shmobile_scu_base;
/* setup r8a7779 specific SCU bits */
shmobile_scu_base = IOMEM(R8A7779_SCU_BASE);

3
arch/arm/mach-tango/Kconfig
View File

@ -1,5 +1,6 @@
config ARCH_TANGO
bool "Sigma Designs Tango4 (SMP87xx)" if ARCH_MULTI_V7
bool "Sigma Designs Tango4 (SMP87xx)"
depends on ARCH_MULTI_V7
# Cortex-A9 MPCore r3p0, PL310 r3p2
select ARCH_HAS_HOLES_MEMORYMODEL
select ARM_ERRATA_754322

2
arch/arm/mach-tango/platsmp.c
View File

@ -9,7 +9,7 @@ static int tango_boot_secondary(unsigned int cpu, struct task_struct *idle)
return 0;
}
static struct smp_operations tango_smp_ops __initdata = {
static const struct smp_operations tango_smp_ops __initconst = {
.smp_boot_secondary = tango_boot_secondary,
};

2
arch/arm/mm/mmap.c
View File

@ -173,7 +173,7 @@ unsigned long arch_mmap_rnd(void)
{
unsigned long rnd;
rnd = (unsigned long)get_random_int() & ((1 << mmap_rnd_bits) - 1);
rnd = get_random_long() & ((1UL << mmap_rnd_bits) - 1);
return rnd << PAGE_SHIFT;
}

2
arch/arm64/Makefile
View File

@ -88,7 +88,7 @@ Image: vmlinux
Image.%: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
zinstall install: vmlinux
zinstall install:
$(Q)$(MAKE) $(build)=$(boot) $@
%.dtb: scripts

4
arch/arm64/boot/Makefile
View File

@ -34,10 +34,10 @@ $(obj)/Image.lzma: $(obj)/Image FORCE
$(obj)/Image.lzo: $(obj)/Image FORCE
$(call if_changed,lzo)
install: $(obj)/Image
install:
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(obj)/Image System.map "$(INSTALL_PATH)"
zinstall: $(obj)/Image.gz
zinstall:
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(obj)/Image.gz System.map "$(INSTALL_PATH)"

1
arch/arm64/boot/dts/arm/juno-base.dtsi
View File

@ -115,6 +115,7 @@ dma@7ff00000 {
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,

2
arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
View File

@ -12,6 +12,8 @@ aliases {
rtc1 = "/rtc@0,7000e000";
};
chosen { };
memory {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>;

Some files were not shown because too many files have changed in this diff Show More