rtlwifi: rtl8192cu: Fix problems with blank lines

The following problems were found:

WARNING: Missing a blank line after declarations
CHECK: Please don't use multiple blank lines
CHECK: Please use a blank line after function/struct/union/enum declarations

There are no code changes.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This commit is contained in:
Larry Finger 2019-02-21 13:31:14 -06:00 committed by Kalle Valo
parent 2973af748d
commit 6d255202a2
6 changed files with 22 additions and 11 deletions

View File

@ -747,6 +747,7 @@ static void _rtl92cu_init_queue_priority(struct ieee80211_hw *hw,
u8 queue_sel)
{
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
if (IS_NORMAL_CHIP(rtlhal->version))
_rtl92cu_init_chipn_queue_priority(hw, wmm_enable, out_ep_num,
queue_sel);
@ -813,6 +814,7 @@ static int _rtl92cu_init_mac(struct ieee80211_hw *hw)
u8 wmm_enable = false; /* TODO */
u8 out_ep_nums = rtlusb->out_ep_nums;
u8 queue_sel = rtlusb->out_queue_sel;
err = _rtl92cu_init_power_on(hw);
if (err) {
@ -1013,6 +1015,7 @@ d. SYS_FUNC_EN 0x02[7:0] = 0x16 reset BB state machine
e. SYS_FUNC_EN 0x02[7:0] = 0x14 reset BB state machine
***************************************/
u8 erfpath = 0, value8 = 0;
rtl_write_byte(rtlpriv, REG_TXPAUSE, 0xFF);
rtl_set_rfreg(hw, (enum radio_path)erfpath, 0x0, MASKBYTE0, 0x0);
@ -1204,6 +1207,7 @@ static void _rtl92cu_stop_tx_beacon(struct ieee80211_hw *hw)
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
u8 tmp1byte = 0;
if (IS_NORMAL_CHIP(rtlhal->version)) {
tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2);
rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
@ -1353,6 +1357,7 @@ void rtl92cu_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
if (check_bssid) {
u8 tmp;
if (IS_NORMAL_CHIP(rtlhal->version)) {
reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
tmp = BIT(4);
@ -1365,6 +1370,7 @@ void rtl92cu_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
_rtl92cu_set_bcn_ctrl_reg(hw, 0, tmp);
} else {
u8 tmp;
if (IS_NORMAL_CHIP(rtlhal->version)) {
reg_rcr &= ~(RCR_CBSSID_DATA | RCR_CBSSID_BCN);
tmp = BIT(4);
@ -1631,6 +1637,7 @@ void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
case HW_VAR_ACK_PREAMBLE:{
u8 reg_tmp;
u8 short_preamble = (bool)*val;
reg_tmp = 0;
if (short_preamble)
reg_tmp |= 0x80;
@ -1881,6 +1888,7 @@ void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
break;
case HW_VAR_KEEP_ALIVE:{
u8 array[2];
array[0] = 0xff;
array[1] = *((u8 *)val);
rtl92c_fill_h2c_cmd(hw, H2C_92C_KEEP_ALIVE_CTRL, 2,
@ -1963,7 +1971,6 @@ static void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
if (nmode && ((curtxbw_40mhz &&
curshortgi_40mhz) || (!curtxbw_40mhz &&
curshortgi_20mhz))) {
ratr_value |= 0x10000000;
tmp_ratr_value = (ratr_value >> 12);

View File

@ -14,14 +14,12 @@
#define TX_TOTAL_PAGE_NUMBER 0xF8
#define TX_PAGE_BOUNDARY (TX_TOTAL_PAGE_NUMBER + 1)
#define CHIP_B_PAGE_NUM_PUBQ 0xE7
/* For Test Chip Setting
* (HPQ + LPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER */
#define CHIP_A_PAGE_NUM_PUBQ 0x7E
/* For Chip A Setting */
#define WMM_CHIP_A_TX_TOTAL_PAGE_NUMBER 0xF5
#define WMM_CHIP_A_TX_PAGE_BOUNDARY \
@ -31,8 +29,6 @@
#define WMM_CHIP_A_PAGE_NUM_HPQ 0x29
#define WMM_CHIP_A_PAGE_NUM_LPQ 0x29
/* Note: For Chip B Setting ,modify later */
#define WMM_CHIP_B_TX_TOTAL_PAGE_NUMBER 0xF5
#define WMM_CHIP_B_TX_PAGE_BOUNDARY \

View File

@ -24,7 +24,6 @@
#define RX_EVM rx_evm_percentage
#define RX_SIGQ rx_mimo_sig_qual
void rtl92c_read_chip_version(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
@ -143,6 +142,7 @@ bool rtl92c_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
} while (++count);
return status;
}
/**
* rtl92c_init_LLT_table - Init LLT table
* @io: io callback
@ -189,6 +189,7 @@ bool rtl92c_init_llt_table(struct ieee80211_hw *hw, u32 boundary)
}
return rst;
}
void rtl92c_set_key(struct ieee80211_hw *hw, u32 key_index,
u8 *p_macaddr, bool is_group, u8 enc_algo,
bool is_wepkey, bool clear_all)
@ -370,6 +371,7 @@ void rtl92c_set_qos(struct ieee80211_hw *hw, int aci)
void rtl92c_init_driver_info_size(struct ieee80211_hw *hw, u8 size)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
rtl_write_byte(rtlpriv, REG_RX_DRVINFO_SZ, size);
}
@ -647,6 +649,7 @@ static void _rtl92c_query_rxphystatus(struct ieee80211_hw *hw,
pstats->RX_SIGQ[1] = -1;
if (is_cck_rate) {
u8 report, cck_highpwr;
cck_buf = (struct phy_sts_cck_8192s_t *)p_drvinfo;
if (!in_powersavemode)
cck_highpwr = rtlphy->cck_high_power;
@ -654,6 +657,7 @@ static void _rtl92c_query_rxphystatus(struct ieee80211_hw *hw,
cck_highpwr = false;
if (!cck_highpwr) {
u8 cck_agc_rpt = cck_buf->cck_agc_rpt;
report = cck_buf->cck_agc_rpt & 0xc0;
report = report >> 6;
switch (report) {
@ -672,6 +676,7 @@ static void _rtl92c_query_rxphystatus(struct ieee80211_hw *hw,
}
} else {
u8 cck_agc_rpt = cck_buf->cck_agc_rpt;
report = p_drvinfo->cfosho[0] & 0x60;
report = report >> 5;
switch (report) {
@ -694,6 +699,7 @@ static void _rtl92c_query_rxphystatus(struct ieee80211_hw *hw,
pstats->recvsignalpower = rx_pwr_all;
if (packet_match_bssid) {
u8 sq;
if (pstats->rx_pwdb_all > 40)
sq = 100;
else {

View File

@ -18,7 +18,6 @@ void rtl92c_enable_interrupt(struct ieee80211_hw *hw);
void rtl92c_disable_interrupt(struct ieee80211_hw *hw);
void rtl92c_set_qos(struct ieee80211_hw *hw, int aci);
/*---------------------------------------------------------------
* Hardware init functions
*---------------------------------------------------------------*/
@ -130,6 +129,4 @@ void rtl92c_translate_rx_signal_stuff(struct ieee80211_hw *hw,
* Card disable functions
*---------------------------------------------------------------*/
#endif

View File

@ -108,6 +108,7 @@ static void threeoutepmapping(struct ieee80211_hw *hw, bool bwificfg,
struct rtl_ep_map *ep_map)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
if (bwificfg) { /* for WMM */
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
"USB 3EP Setting for WMM.....\n");
@ -141,6 +142,7 @@ static void oneoutepmapping(struct ieee80211_hw *hw, struct rtl_ep_map *ep_map)
ep_map->ep_mapping[RTL_TXQ_BCN] = 2;
ep_map->ep_mapping[RTL_TXQ_HI] = 2;
}
static int _out_ep_mapping(struct ieee80211_hw *hw)
{
int err = 0;
@ -174,11 +176,13 @@ static int _out_ep_mapping(struct ieee80211_hw *hw)
return err;
}
/* endpoint mapping */
int rtl8192cu_endpoint_mapping(struct ieee80211_hw *hw)
{
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
int error = 0;
if (likely(IS_NORMAL_CHIP(rtlhal->version)))
error = configvernoutep(hw);
else
@ -442,6 +446,7 @@ static void _rtl_fill_usb_tx_desc(u8 *txdesc)
SET_TX_DESC_LAST_SEG(txdesc, 1);
SET_TX_DESC_FIRST_SEG(txdesc, 1);
}
/**
* For HW recovery information
*/
@ -531,11 +536,13 @@ void rtl92cu_tx_fill_desc(struct ieee80211_hw *hw,
sta = ieee80211_find_sta(mac->vif, mac->bssid);
if (sta) {
u8 ampdu_density = sta->ht_cap.ampdu_density;
SET_TX_DESC_AMPDU_DENSITY(txdesc, ampdu_density);
}
rcu_read_unlock();
if (info->control.hw_key) {
struct ieee80211_key_conf *keyconf = info->control.hw_key;
switch (keyconf->cipher) {
case WLAN_CIPHER_SUITE_WEP40:
case WLAN_CIPHER_SUITE_WEP104:

View File

@ -198,7 +198,6 @@ struct rx_drv_info_92c {
#define SET_TX_DESC_OWN(__txdesc, __value) \
SET_BITS_TO_LE_4BYTE(__txdesc, 31, 1, __value)
/* Dword 1 */
#define SET_TX_DESC_MACID(__txdesc, __value) \
SET_BITS_TO_LE_4BYTE(__txdesc + 4, 0, 5, __value)
@ -355,7 +354,6 @@ struct rx_drv_info_92c {
#define SET_TX_DESC_MCSG15_MAX_LEN(__txdesc, __value) \
SET_BITS_TO_LE_4BYTE(__txdesc + 28, 28, 4, __value)
int rtl8192cu_endpoint_mapping(struct ieee80211_hw *hw);
u16 rtl8192cu_mq_to_hwq(__le16 fc, u16 mac80211_queue_index);
bool rtl92cu_rx_query_desc(struct ieee80211_hw *hw,