openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

ARM: dts: i.MX27 boards: Switch to use standard GPIO and IRQ flags definitions 

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This commit is contained in:
Alexander Shiyan 2013-11-30 10:18:04 +04:00 committed by Shawn Guo
parent f64ba74682
commit 6ece55b392
6 changed files with 20 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
arch/arm/boot/dts/imx27-apf27dev.dts
View File

@ -41,7 +41,7 @@ gpio-keys {
user-key {
label = "user";
gpios = <&gpio6 13 0>;
gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
linux,code = <276>; /* BTN_EXTRA */
};
};
@ -51,7 +51,7 @@ leds {
user {
label = "Heartbeat";
gpios = <&gpio6 14 0>;
gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
@ -59,7 +59,7 @@ user {
&cspi1 {
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 28 1>;
cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cspi1>;
status = "okay";
@ -67,8 +67,9 @@ &cspi1 {
&cspi2 {
fsl,spi-num-chipselects = <3>;
cs-gpios = <&gpio4 21 1>, <&gpio4 27 1>,
<&gpio2 17 1>;
cs-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>,
<&gpio4 27 GPIO_ACTIVE_LOW>,
<&gpio2 17 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cspi2>;
status = "okay";
@ -179,7 +180,7 @@ MX27_PAD_SD2_D3__SD2_D3 0x0
&sdhci2 {
bus-width = <4>;
cd-gpios = <&gpio3 14 0>;
cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdhc2>;
status = "okay";

2
arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
View File

@ -124,7 +124,7 @@ &owire {
};
&sdhci2 {
cd-gpios = <&gpio3 29 0>;
cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
status = "okay";
};

4
arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
View File

@ -24,8 +24,8 @@ memory {
&cspi1 {
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 28 0>,
<&gpio4 27 0>;
cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
<&gpio4 27 GPIO_ACTIVE_HIGH>;
status = "okay";
};

9
arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
View File

@ -16,7 +16,8 @@ / {
&cspi1 {
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 28 0>, <&gpio4 27 0>;
cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
<&gpio4 27 GPIO_ACTIVE_LOW>;
};
&i2c1 {
@ -65,8 +66,8 @@ MX27_PAD_UART2_RTS__UART2_RTS 0x0
&sdhci2 {
bus-width = <4>;
cd-gpios = <&gpio3 29 0>;
wp-gpios = <&gpio3 28 0>;
cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
wp-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
vmmc-supply = <&vmmc1_reg>;
status = "okay";
};
@ -90,7 +91,7 @@ can@d4000000 {
compatible = "nxp,sja1000";
reg = <4 0x00000000 0x00000100>;
interrupt-parent = <&gpio5>;
interrupts = <19 0x2>;
interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
nxp,external-clock-frequency = <16000000>;
nxp,tx-output-config = <0x16>;
nxp,no-comparator-bypass;

6
arch/arm/boot/dts/imx27-phytec-phycore-som.dts
View File

@ -52,7 +52,7 @@ pins4 {
&cspi1 {
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 28 0>;
cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
status = "okay";
pmic: mc13783@0 {
@ -62,7 +62,7 @@ pmic: mc13783@0 {
spi-max-frequency = <20000000>;
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <23 0x4>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
fsl,mc13xxx-uses-adc;
fsl,mc13xxx-uses-rtc;
@ -149,7 +149,7 @@ pwgt1spi_reg: pwgt1spi {
&fec {
phy-mode = "mii";
phy-reset-gpios = <&gpio3 30 0>;
phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>;
phy-supply = <&reg_3v3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;

2
arch/arm/boot/dts/imx27.dtsi
View File

@ -11,6 +11,8 @@
#include "skeleton.dtsi"
#include "imx27-pinfunc.h"
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
/ {
aliases {