openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

staging: comedi: ni_labpc: pass ai scan mode through various functions 

Pass the `enum scan_mode` value calculated by `labpc_ai_scan_mode()` as
a parameter to various other functions so they don't have to call it
themselves.  Amongst others, the affected functions include
`labpc_adc_timing()`, `labpc_ai_convert_period()` and
`labpc_ai_scan_period()`.

`labpc_adc_timing()` calls `labpc_ai_convert_period()` and
`labpc_ai_scan_period()` in several places, but the returned values are
the same each time, so change it to just call those functions once and
re-use the return values.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Ian Abbott 2012-09-19 19:37:37 +01:00 committed by Greg Kroah-Hartman
parent 5743aaac29
commit 6f73fbcec2
1 changed files with 61 additions and 63 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

124
drivers/staging/comedi/drivers/ni_labpc.c
View File

@ -206,6 +206,13 @@ NI manuals:
#define INIT_A1_BITS 0x70
#define COUNTER_B_BASE_REG 0x18
enum scan_mode {
MODE_SINGLE_CHAN,
MODE_SINGLE_CHAN_INTERVAL,
MODE_MULT_CHAN_UP,
MODE_MULT_CHAN_DOWN,
};
static int labpc_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
static irqreturn_t labpc_interrupt(int irq, void *d);
static int labpc_drain_fifo(struct comedi_device *dev);
@ -236,7 +243,8 @@ static int labpc_eeprom_write_insn(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data);
static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd);
static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd,
enum scan_mode scan_mode);
#ifdef CONFIG_ISA_DMA_API
static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd);
#endif
@ -254,13 +262,6 @@ static int labpc_eeprom_write(struct comedi_device *dev,
static void write_caldac(struct comedi_device *dev, unsigned int channel,
unsigned int value);
enum scan_mode {
MODE_SINGLE_CHAN,
MODE_SINGLE_CHAN_INTERVAL,
MODE_MULT_CHAN_UP,
MODE_MULT_CHAN_DOWN,
};
/* analog input ranges */
#define NUM_LABPC_PLUS_AI_RANGES 16
/* indicates unipolar ranges */
@ -839,15 +840,14 @@ static enum scan_mode labpc_ai_scan_mode(const struct comedi_cmd *cmd)
}
static int labpc_ai_chanlist_invalid(const struct comedi_device *dev,
const struct comedi_cmd *cmd)
const struct comedi_cmd *cmd,
enum scan_mode mode)
{
int mode, channel, range, aref, i;
int channel, range, aref, i;
if (cmd->chanlist == NULL)
return 0;
mode = labpc_ai_scan_mode(cmd);
if (mode == MODE_SINGLE_CHAN)
return 0;
@ -911,9 +911,10 @@ static int labpc_ai_chanlist_invalid(const struct comedi_device *dev,
return 0;
}
static int labpc_use_continuous_mode(const struct comedi_cmd *cmd)
static int labpc_use_continuous_mode(const struct comedi_cmd *cmd,
enum scan_mode mode)
{
if (labpc_ai_scan_mode(cmd) == MODE_SINGLE_CHAN)
if (mode == MODE_SINGLE_CHAN)
return 1;
if (cmd->scan_begin_src == TRIG_FOLLOW)
@ -922,24 +923,25 @@ static int labpc_use_continuous_mode(const struct comedi_cmd *cmd)
return 0;
}
static unsigned int labpc_ai_convert_period(const struct comedi_cmd *cmd)
static unsigned int labpc_ai_convert_period(const struct comedi_cmd *cmd,
enum scan_mode mode)
{
if (cmd->convert_src != TRIG_TIMER)
return 0;
if (labpc_ai_scan_mode(cmd) == MODE_SINGLE_CHAN &&
cmd->scan_begin_src == TRIG_TIMER)
if (mode == MODE_SINGLE_CHAN && cmd->scan_begin_src == TRIG_TIMER)
return cmd->scan_begin_arg;
return cmd->convert_arg;
}
static void labpc_set_ai_convert_period(struct comedi_cmd *cmd, unsigned int ns)
static void labpc_set_ai_convert_period(struct comedi_cmd *cmd,
enum scan_mode mode, unsigned int ns)
{
if (cmd->convert_src != TRIG_TIMER)
return;
if (labpc_ai_scan_mode(cmd) == MODE_SINGLE_CHAN &&
if (mode == MODE_SINGLE_CHAN &&
cmd->scan_begin_src == TRIG_TIMER) {
cmd->scan_begin_arg = ns;
if (cmd->convert_arg > cmd->scan_begin_arg)
@ -948,25 +950,25 @@ static void labpc_set_ai_convert_period(struct comedi_cmd *cmd, unsigned int ns)
cmd->convert_arg = ns;
}
static unsigned int labpc_ai_scan_period(const struct comedi_cmd *cmd)
static unsigned int labpc_ai_scan_period(const struct comedi_cmd *cmd,
enum scan_mode mode)
{
if (cmd->scan_begin_src != TRIG_TIMER)
return 0;
if (labpc_ai_scan_mode(cmd) == MODE_SINGLE_CHAN &&
cmd->convert_src == TRIG_TIMER)
if (mode == MODE_SINGLE_CHAN && cmd->convert_src == TRIG_TIMER)
return 0;
return cmd->scan_begin_arg;
}
static void labpc_set_ai_scan_period(struct comedi_cmd *cmd, unsigned int ns)
static void labpc_set_ai_scan_period(struct comedi_cmd *cmd,
enum scan_mode mode, unsigned int ns)
{
if (cmd->scan_begin_src != TRIG_TIMER)
return;
if (labpc_ai_scan_mode(cmd) == MODE_SINGLE_CHAN &&
cmd->convert_src == TRIG_TIMER)
if (mode == MODE_SINGLE_CHAN && cmd->convert_src == TRIG_TIMER)
return;
cmd->scan_begin_arg = ns;
@ -978,6 +980,7 @@ static int labpc_ai_cmdtest(struct comedi_device *dev,
int err = 0;
int tmp, tmp2;
int stop_mask;
enum scan_mode mode;
/* step 1: make sure trigger sources are trivially valid */
@ -1099,14 +1102,15 @@ static int labpc_ai_cmdtest(struct comedi_device *dev,
tmp = cmd->convert_arg;
tmp2 = cmd->scan_begin_arg;
labpc_adc_timing(dev, cmd);
mode = labpc_ai_scan_mode(cmd);
labpc_adc_timing(dev, cmd, mode);
if (tmp != cmd->convert_arg || tmp2 != cmd->scan_begin_arg)
err++;
if (err)
return 4;
if (labpc_ai_chanlist_invalid(dev, cmd))
if (labpc_ai_chanlist_invalid(dev, cmd, mode))
return 5;
return 0;
@ -1122,6 +1126,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
struct comedi_async *async = s->async;
struct comedi_cmd *cmd = &async->cmd;
enum transfer_type xfer;
enum scan_mode mode;
unsigned long flags;
if (!dev->irq) {
@ -1187,6 +1192,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
} else
xfer = fifo_not_empty_transfer;
devpriv->current_transfer = xfer;
mode = labpc_ai_scan_mode(cmd);
/* setup command6 register for 1200 boards */
if (thisboard->register_layout == labpc_1200_layout) {
@ -1211,7 +1217,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
else
devpriv->command6_bits &= ~A1_INTR_EN_BIT;
/* are we scanning up or down through channels? */
if (labpc_ai_scan_mode(cmd) == MODE_MULT_CHAN_UP)
if (mode == MODE_MULT_CHAN_UP)
devpriv->command6_bits |= ADC_SCAN_UP_BIT;
else
devpriv->command6_bits &= ~ADC_SCAN_UP_BIT;
@ -1222,19 +1228,18 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
/* setup channel list, etc (command1 register) */
devpriv->command1_bits = 0;
if (labpc_ai_scan_mode(cmd) == MODE_MULT_CHAN_UP)
if (mode == MODE_MULT_CHAN_UP)
channel = CR_CHAN(cmd->chanlist[cmd->chanlist_len - 1]);
else
channel = CR_CHAN(cmd->chanlist[0]);
/* munge channel bits for differential / scan disabled mode */
if (labpc_ai_scan_mode(cmd) != MODE_SINGLE_CHAN && aref == AREF_DIFF)
if (mode != MODE_SINGLE_CHAN && aref == AREF_DIFF)
channel *= 2;
devpriv->command1_bits |= ADC_CHAN_BITS(channel);
devpriv->command1_bits |= thisboard->ai_range_code[range];
devpriv->write_byte(devpriv->command1_bits, dev->iobase + COMMAND1_REG);
/* manual says to set scan enable bit on second pass */
if (labpc_ai_scan_mode(cmd) == MODE_MULT_CHAN_UP ||
labpc_ai_scan_mode(cmd) == MODE_MULT_CHAN_DOWN) {
if (mode == MODE_MULT_CHAN_UP || mode == MODE_MULT_CHAN_DOWN) {
devpriv->command1_bits |= ADC_SCAN_EN_BIT;
/* need a brief delay before enabling scan, or scan
* list will get screwed when you switch
@ -1249,7 +1254,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT;
/* XXX should discard first scan when using interval scanning
* since manual says it is not synced with scan clock */
if (labpc_use_continuous_mode(cmd) == 0) {
if (labpc_use_continuous_mode(cmd, mode) == 0) {
devpriv->command4_bits |= INTERVAL_SCAN_EN_BIT;
if (cmd->scan_begin_src == TRIG_EXT)
devpriv->command4_bits |= EXT_SCAN_EN_BIT;
@ -1267,7 +1272,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
if (cmd->convert_src == TRIG_TIMER || cmd->scan_begin_src == TRIG_TIMER) {
/* set up pacing */
labpc_adc_timing(dev, cmd);
labpc_adc_timing(dev, cmd, mode);
/* load counter b0 in mode 3 */
ret = labpc_counter_load(dev, dev->iobase + COUNTER_B_BASE_REG,
0, devpriv->divisor_b0, 3);
@ -1277,7 +1282,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
}
}
/* set up conversion pacing */
if (labpc_ai_convert_period(cmd)) {
if (labpc_ai_convert_period(cmd, mode)) {
/* load counter a0 in mode 2 */
ret = labpc_counter_load(dev, dev->iobase + COUNTER_A_BASE_REG,
0, devpriv->divisor_a0, 2);
@ -1290,7 +1295,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
dev->iobase + COUNTER_A_CONTROL_REG);
/* set up scan pacing */
if (labpc_ai_scan_period(cmd)) {
if (labpc_ai_scan_period(cmd, mode)) {
/* load counter b1 in mode 2 */
ret = labpc_counter_load(dev, dev->iobase + COUNTER_B_BASE_REG,
1, devpriv->divisor_b1, 2);
@ -1791,24 +1796,29 @@ static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd)
#endif
/* figures out what counter values to use based on command */
static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd)
static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd,
enum scan_mode mode)
{
/* max value for 16 bit counter in mode 2 */
const int max_counter_value = 0x10000;
/* min value for 16 bit counter in mode 2 */
const int min_counter_value = 2;
unsigned int base_period;
unsigned int scan_period;
unsigned int convert_period;
/*
* if both convert and scan triggers are TRIG_TIMER, then they
* both rely on counter b0
*/
if (labpc_ai_convert_period(cmd) && labpc_ai_scan_period(cmd)) {
convert_period = labpc_ai_convert_period(cmd, mode);
scan_period = labpc_ai_scan_period(cmd, mode);
if (convert_period && scan_period) {
/*
* pick the lowest b0 divisor value we can (for maximum input
* clock speed on convert and scan counters)
*/
devpriv->divisor_b0 = (labpc_ai_scan_period(cmd) - 1) /
devpriv->divisor_b0 = (scan_period - 1) /
(LABPC_TIMER_BASE * max_counter_value) + 1;
if (devpriv->divisor_b0 < min_counter_value)
devpriv->divisor_b0 = min_counter_value;
@ -1822,25 +1832,19 @@ static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd)
default:
case TRIG_ROUND_NEAREST:
devpriv->divisor_a0 =
(labpc_ai_convert_period(cmd) +
(base_period / 2)) / base_period;
(convert_period + (base_period / 2)) / base_period;
devpriv->divisor_b1 =
(labpc_ai_scan_period(cmd) +
(base_period / 2)) / base_period;
(scan_period + (base_period / 2)) / base_period;
break;
case TRIG_ROUND_UP:
devpriv->divisor_a0 =
(labpc_ai_convert_period(cmd) + (base_period -
1)) / base_period;
(convert_period + (base_period - 1)) / base_period;
devpriv->divisor_b1 =
(labpc_ai_scan_period(cmd) + (base_period -
1)) / base_period;
(scan_period + (base_period - 1)) / base_period;
break;
case TRIG_ROUND_DOWN:
devpriv->divisor_a0 =
labpc_ai_convert_period(cmd) / base_period;
devpriv->divisor_b1 =
labpc_ai_scan_period(cmd) / base_period;
devpriv->divisor_a0 = convert_period / base_period;
devpriv->divisor_b1 = scan_period / base_period;
break;
}
/* make sure a0 and b1 values are acceptable */
@ -1853,18 +1857,15 @@ static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd)
if (devpriv->divisor_b1 > max_counter_value)
devpriv->divisor_b1 = max_counter_value;
/* write corrected timings to command */
labpc_set_ai_convert_period(cmd,
labpc_set_ai_convert_period(cmd, mode,
base_period * devpriv->divisor_a0);
labpc_set_ai_scan_period(cmd,
labpc_set_ai_scan_period(cmd, mode,
base_period * devpriv->divisor_b1);
/*
* if only one TRIG_TIMER is used, we can employ the generic
* cascaded timing functions
*/
} else if (labpc_ai_scan_period(cmd)) {
unsigned int scan_period;
scan_period = labpc_ai_scan_period(cmd);
} else if (scan_period) {
/*
* calculate cascaded counter values
* that give desired scan timing
@ -1874,11 +1875,8 @@ static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd)
&(devpriv->divisor_b0),
&scan_period,
cmd->flags & TRIG_ROUND_MASK);
labpc_set_ai_scan_period(cmd, scan_period);
} else if (labpc_ai_convert_period(cmd)) {
unsigned int convert_period;
convert_period = labpc_ai_convert_period(cmd);
labpc_set_ai_scan_period(cmd, mode, scan_period);
} else if (convert_period) {
/*
* calculate cascaded counter values
* that give desired conversion timing
@ -1888,7 +1886,7 @@ static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd)
&(devpriv->divisor_b0),
&convert_period,
cmd->flags & TRIG_ROUND_MASK);
labpc_set_ai_convert_period(cmd, convert_period);
labpc_set_ai_convert_period(cmd, mode, convert_period);
}
}