powerpc/85xx: Enable USB2 controller node for P1020RDB

Enable USB2 controller node for P1020RDB. USB2 controller is used only
when board boots from SPI or SD as it is muxed with eLBC

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Ramneek Mehresh 2012-01-18 11:20:39 +05:30 committed by Kumar Gala
parent f8b5a31877
commit 70a0ac6686
1 changed files with 4 additions and 7 deletions

View File

@ -1,7 +1,7 @@
/*
* P1020 RDB Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2011 Freescale Semiconductor Inc.
* Copyright 2011-2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@ -192,15 +192,12 @@ usb@22000 {
phy_type = "ulpi";
};
/* USB2 is shared with localbus, so it must be disabled
by default. We can't put 'status = "disabled";' here
since U-Boot doesn't clear the status property when
it enables USB2. OTOH, U-Boot does create a new node
when there isn't any. So, just comment it out.
/* USB2 is shared with localbus. It is used
only in case of SPI and SD boot after
appropriate device-tree fixup done by uboot */
usb@23000 {
phy_type = "ulpi";
};
*/
mdio@24000 {
phy0: ethernet-phy@0 {