mirror of https://gitee.com/openkylin/linux.git
drivers: net: cpsw: drop host_port field from struct cpsw_priv
The host_port field is constantly assigned to 0 and this value has never changed (since time when cpsw driver was introduced. More over, if this field will be assigned to non 0 value it will break current driver functionality. Hence, there are no reasons to continue maintaining this host_port field and it can be removed, and the HOST_PORT_NUM and ALE_PORT_HOST defines can be used instead. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
61f1cef90a
commit
71a2cbb72a
|
@ -381,7 +381,6 @@ struct cpsw_priv {
|
|||
u32 coal_intvl;
|
||||
u32 bus_freq_mhz;
|
||||
int rx_packet_max;
|
||||
int host_port;
|
||||
struct clk *clk;
|
||||
u8 mac_addr[ETH_ALEN];
|
||||
struct cpsw_slave *slaves;
|
||||
|
@ -531,7 +530,7 @@ static const struct cpsw_stats cpsw_gstrings_stats[] = {
|
|||
int slave_port = cpsw_get_slave_port(priv, \
|
||||
slave->slave_num); \
|
||||
cpsw_ale_add_mcast(priv->ale, addr, \
|
||||
1 << slave_port | 1 << priv->host_port, \
|
||||
1 << slave_port | ALE_PORT_HOST, \
|
||||
ALE_VLAN, slave->port_vlan, 0); \
|
||||
} else { \
|
||||
cpsw_ale_add_mcast(priv->ale, addr, \
|
||||
|
@ -542,10 +541,7 @@ static const struct cpsw_stats cpsw_gstrings_stats[] = {
|
|||
|
||||
static inline int cpsw_get_slave_port(struct cpsw_priv *priv, u32 slave_num)
|
||||
{
|
||||
if (priv->host_port == 0)
|
||||
return slave_num + 1;
|
||||
else
|
||||
return slave_num;
|
||||
return slave_num + 1;
|
||||
}
|
||||
|
||||
static void cpsw_set_promiscious(struct net_device *ndev, bool enable)
|
||||
|
@ -1090,7 +1086,7 @@ static inline void cpsw_add_dual_emac_def_ale_entries(
|
|||
struct cpsw_priv *priv, struct cpsw_slave *slave,
|
||||
u32 slave_port)
|
||||
{
|
||||
u32 port_mask = 1 << slave_port | 1 << priv->host_port;
|
||||
u32 port_mask = 1 << slave_port | ALE_PORT_HOST;
|
||||
|
||||
if (priv->version == CPSW_VERSION_1)
|
||||
slave_write(slave, slave->port_vlan, CPSW1_PORT_VLAN);
|
||||
|
@ -1101,7 +1097,7 @@ static inline void cpsw_add_dual_emac_def_ale_entries(
|
|||
cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast,
|
||||
port_mask, ALE_VLAN, slave->port_vlan, 0);
|
||||
cpsw_ale_add_ucast(priv->ale, priv->mac_addr,
|
||||
priv->host_port, ALE_VLAN | ALE_SECURE, slave->port_vlan);
|
||||
HOST_PORT_NUM, ALE_VLAN | ALE_SECURE, slave->port_vlan);
|
||||
}
|
||||
|
||||
static void soft_reset_slave(struct cpsw_slave *slave)
|
||||
|
@ -1202,7 +1198,7 @@ static void cpsw_init_host_port(struct cpsw_priv *priv)
|
|||
cpsw_ale_start(priv->ale);
|
||||
|
||||
/* switch to vlan unaware mode */
|
||||
cpsw_ale_control_set(priv->ale, priv->host_port, ALE_VLAN_AWARE,
|
||||
cpsw_ale_control_set(priv->ale, HOST_PORT_NUM, ALE_VLAN_AWARE,
|
||||
CPSW_ALE_VLAN_AWARE);
|
||||
control_reg = readl(&priv->regs->control);
|
||||
control_reg |= CPSW_VLAN_AWARE;
|
||||
|
@ -1216,14 +1212,14 @@ static void cpsw_init_host_port(struct cpsw_priv *priv)
|
|||
&priv->host_port_regs->cpdma_tx_pri_map);
|
||||
__raw_writel(0, &priv->host_port_regs->cpdma_rx_chan_map);
|
||||
|
||||
cpsw_ale_control_set(priv->ale, priv->host_port,
|
||||
cpsw_ale_control_set(priv->ale, HOST_PORT_NUM,
|
||||
ALE_PORT_STATE, ALE_PORT_STATE_FORWARD);
|
||||
|
||||
if (!priv->data.dual_emac) {
|
||||
cpsw_ale_add_ucast(priv->ale, priv->mac_addr, priv->host_port,
|
||||
cpsw_ale_add_ucast(priv->ale, priv->mac_addr, HOST_PORT_NUM,
|
||||
0, 0);
|
||||
cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast,
|
||||
1 << priv->host_port, 0, 0, ALE_MCAST_FWD_2);
|
||||
ALE_PORT_HOST, 0, 0, ALE_MCAST_FWD_2);
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -1616,9 +1612,9 @@ static int cpsw_ndo_set_mac_address(struct net_device *ndev, void *p)
|
|||
flags = ALE_VLAN;
|
||||
}
|
||||
|
||||
cpsw_ale_del_ucast(priv->ale, priv->mac_addr, priv->host_port,
|
||||
cpsw_ale_del_ucast(priv->ale, priv->mac_addr, HOST_PORT_NUM,
|
||||
flags, vid);
|
||||
cpsw_ale_add_ucast(priv->ale, addr->sa_data, priv->host_port,
|
||||
cpsw_ale_add_ucast(priv->ale, addr->sa_data, HOST_PORT_NUM,
|
||||
flags, vid);
|
||||
|
||||
memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN);
|
||||
|
@ -1667,7 +1663,7 @@ static inline int cpsw_add_vlan_ale_entry(struct cpsw_priv *priv,
|
|||
return ret;
|
||||
|
||||
ret = cpsw_ale_add_ucast(priv->ale, priv->mac_addr,
|
||||
priv->host_port, ALE_VLAN, vid);
|
||||
HOST_PORT_NUM, ALE_VLAN, vid);
|
||||
if (ret != 0)
|
||||
goto clean_vid;
|
||||
|
||||
|
@ -1679,7 +1675,7 @@ static inline int cpsw_add_vlan_ale_entry(struct cpsw_priv *priv,
|
|||
|
||||
clean_vlan_ucast:
|
||||
cpsw_ale_del_ucast(priv->ale, priv->mac_addr,
|
||||
priv->host_port, ALE_VLAN, vid);
|
||||
HOST_PORT_NUM, ALE_VLAN, vid);
|
||||
clean_vid:
|
||||
cpsw_ale_del_vlan(priv->ale, vid, 0);
|
||||
return ret;
|
||||
|
@ -2148,7 +2144,6 @@ static int cpsw_probe_dual_emac(struct platform_device *pdev,
|
|||
priv_sl2->bus_freq_mhz = priv->bus_freq_mhz;
|
||||
|
||||
priv_sl2->regs = priv->regs;
|
||||
priv_sl2->host_port = priv->host_port;
|
||||
priv_sl2->host_port_regs = priv->host_port_regs;
|
||||
priv_sl2->wr_regs = priv->wr_regs;
|
||||
priv_sl2->hw_stats = priv->hw_stats;
|
||||
|
@ -2317,7 +2312,6 @@ static int cpsw_probe(struct platform_device *pdev)
|
|||
goto clean_runtime_disable_ret;
|
||||
}
|
||||
priv->regs = ss_regs;
|
||||
priv->host_port = HOST_PORT_NUM;
|
||||
|
||||
/* Need to enable clocks with runtime PM api to access module
|
||||
* registers
|
||||
|
|
Loading…
Reference in New Issue