openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

spi: bcm-qspi: Drive MSPI peripheral SSb pin on cs_change 

As per the spi core implementation for MSPI devices when the transfer is
the last one in the message, the chip may stay selected until the next
transfer. On multi-device SPI busses with nothing blocking messages going
to other devices, this is just a performance hint; starting a message to
another device deselects this one. But in other cases, this can be used
to ensure correctness. Some devices need protocol transactions to be built
from a series of spi_message submissions, where the content of one message
is determined by the results of previous messages and where the whole
transaction ends when the chipselect goes intactive.

On CS change after completing the last serial transfer, the MSPI driver
drives SSb pin CDRAM register correctly according comments in core spi.h
as shown below:

case 1) EOM =1, cs_change =0: SSb inactive
case 2) EOM =1, cs_change =1: SSb active
case 3) EOM =0, cs_change =0: SSb active
case 4) EOM =0, cs_change =1: SSb inactive

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Link: https://lore.kernel.org/r/20200420190853.45614-5-kdasu.kdev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Kamal Dasu 2020-04-20 15:08:48 -04:00 committed by Mark Brown
parent 0dadde344d
commit 742d595806
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
1 changed files with 12 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
drivers/spi/spi-bcm-qspi.c
View File

@ -612,19 +612,15 @@ static int update_qspi_trans_byte_count(struct bcm_qspi *qspi,
if (qt->trans->cs_change &&
(flags & TRANS_STATUS_BREAK_CS_CHANGE))
ret |= TRANS_STATUS_BREAK_CS_CHANGE;
if (ret)
goto done;
dev_dbg(&qspi->pdev->dev, "advance msg exit\n");
if (bcm_qspi_mspi_transfer_is_last(qspi, qt))
ret = TRANS_STATUS_BREAK_EOM;
ret |= TRANS_STATUS_BREAK_EOM;
else
ret = TRANS_STATUS_BREAK_NO_BYTES;
ret |= TRANS_STATUS_BREAK_NO_BYTES;
qt->trans = NULL;
}
done:
dev_dbg(&qspi->pdev->dev, "trans %p len %d byte %d ret %x\n",
qt->trans, qt->trans ? qt->trans->len : 0, qt->byte, ret);
return ret;
@ -771,7 +767,16 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
bcm_qspi_write(qspi, MSPI, MSPI_NEWQP, 0);
bcm_qspi_write(qspi, MSPI, MSPI_ENDQP, slot - 1);
if (tstatus & TRANS_STATUS_BREAK_DESELECT) {
/*
* case 1) EOM =1, cs_change =0: SSb inactive
* case 2) EOM =1, cs_change =1: SSb stay active
* case 3) EOM =0, cs_change =0: SSb stay active
* case 4) EOM =0, cs_change =1: SSb inactive
*/
if (((tstatus & TRANS_STATUS_BREAK_DESELECT)
== TRANS_STATUS_BREAK_CS_CHANGE) ||
((tstatus & TRANS_STATUS_BREAK_DESELECT)
== TRANS_STATUS_BREAK_EOM)) {
mspi_cdram = read_cdram_slot(qspi, slot - 1) &
~MSPI_CDRAM_CONT_BIT;
write_cdram_slot(qspi, slot - 1, mspi_cdram);