From 95671ec23696d7351b47d159159c6bdcb64fafe4 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Mon, 1 Apr 2019 10:17:23 -0700 Subject: [PATCH 01/13] ARM: dts: rockchip: Specify rk3288-veyron-chromebook's display timings Let's document the display timings that most veyron chromebooks (like jaq, jerry, mighty, speedy) have been using out in the field. This uses the standard blankings but a slightly slower clock rate, thus getting a refresh rate 58.3 Hz. NOTE: this won't really do anything except cause DRM to properly report the refresh rate since vop_crtc_mode_fixup() was rounding the pixel clock to 74.25 MHz anyway. Apparently the adjusted rate isn't exposed to userspace so it's important that the rate we're trying to achieve is mostly right. For the downstream kernel change related to this see See https://crrev.com/c/324558. NOTE: minnie uses a different panel will be fixed up in a future patch, so for now we'll just delete the panel timings there. Signed-off-by: Douglas Anderson Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 14 ++++++++++++++ arch/arm/boot/dts/rk3288-veyron-minnie.dts | 2 ++ 2 files changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index 1cadb522fd0d..6a28ce345ba0 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -91,6 +91,20 @@ panel: panel { power-supply = <&vcc33_lcd>; backlight = <&backlight>; + panel-timing { + clock-frequency = <74250000>; + hactive = <1366>; + hfront-porch = <136>; + hback-porch = <60>; + hsync-len = <30>; + hsync-active = <0>; + vactive = <768>; + vfront-porch = <8>; + vback-porch = <12>; + vsync-len = <12>; + vsync-active = <0>; + }; + ports { panel_in: port { panel_in_edp: endpoint { diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 9008e703c07e..92ab897edb1b 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -138,6 +138,8 @@ touchscreen@10 { &panel { compatible = "auo,b101ean01", "simple-panel"; power-supply= <&panel_regulator>; + + /delete-node/ panel-timing; }; &rk808 { From 123643e5c40a9c7d77649e306ccb5b0354938d49 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Mon, 1 Apr 2019 10:17:24 -0700 Subject: [PATCH 02/13] ARM: dts: rockchip: Specify rk3288-veyron-minnie's display timings Just like we did for rk3288-veyron-chromebook, we want to be able to use one of the fixed PLLs in the system to make the pixel clock for minnie. Specifying these timings matches us with how the display is used on the downstream Chrome OS kernel. See https://crrev.com/c/323211. Unlike what we did for rk3288-veyron-chromebook, this CL actually changes the timings (though not the pixel clock) that is used when using the upstream kernel. Booting up a minnie shows that it ended up with a 66.67 MHz pixel clock but it was still using the porches/blankings it would have wanted for a 72.5 MHz pixel clock. NOTE: compared to the downstream kernel, this seems to cause a slightly different result reported in the 'modetest' command on a Chromebook. The downstream kernel shows: 1280x800 60 1280 1298 1330 1351 800 804 822 830 66667 With this patch we have: 1280x800 59 1280 1298 1330 1351 800 804 822 830 66666 Specifically modetest was reporting 60 Hz on the downstream kernel but the upstream kernel does the math and comesup with 59 (because we actually achieve 59.45 Hz). Also upstream doesn't round the Hz up when converting to kHz--it seems to truncate. ALSO NOTE: when I look at the EDID from the datasheet, I see: -hsync -vsync ...but it seems like we've never actually run with that so I've continued leaving that out. Signed-off-by: Douglas Anderson Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-veyron-minnie.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 92ab897edb1b..4cc7d3659484 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -140,6 +140,18 @@ &panel { power-supply= <&panel_regulator>; /delete-node/ panel-timing; + + panel-timing { + clock-frequency = <66666667>; + hactive = <1280>; + hfront-porch = <18>; + hback-porch = <21>; + hsync-len = <32>; + vactive = <800>; + vfront-porch = <4>; + vback-porch = <8>; + vsync-len = <18>; + }; }; &rk808 { From 31ed9d9d71ec396d38090a85f5b3dbd6936650b4 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Tue, 23 Jul 2019 15:52:58 -0700 Subject: [PATCH 03/13] ARM: dts: rockchip: Limit WiFi TX power on rk3288-veyron-jerry The downstream Chrome OS 3.14 kernel for jerry limits WiFi TX power through calibration data in the device tree [1]. Add a DT node for the WiFi chip and use the downstream calibration data. Not all calibration data entries have the length specified in the binding (Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt), however this is the data used by the downstream ('official') kernel and the binding mentions that "the length can vary between hw versions". [1] https://crrev.com/c/271237 Signed-off-by: Matthias Kaehlcke Reviewed-by: Douglas Anderson Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-veyron-jerry.dts | 149 ++++++++++++++++++++++ 1 file changed, 149 insertions(+) diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts index 164561f04c1d..5abb9d228b6c 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -82,6 +82,155 @@ regulator-state-mem { }; }; +&sdio0 { + #address-cells = <1>; + #size-cells = <0>; + + mwifiex: wifi@1 { + compatible = "marvell,sd8897"; + reg = <1>; + + marvell,caldata-txpwrlimit-2g = /bits/ 8 < +0x01 0x00 0x06 0x00 0x08 0x02 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x01 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x02 0x00 0x0f +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x03 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x04 0x00 0x0f +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x05 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x06 0x00 0x0f +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x07 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x08 0x00 0x0f +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x09 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x0a 0x00 0x0f +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x0b 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x0c 0x00 0x0f +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x0d 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09>; + + marvell,caldata-txpwrlimit-5g-sub0 = /bits/ 8 < +0x01 0x00 0x06 0x00 0xf0 0x01 0x89 0x01 +0x3a 0x00 0x88 0x13 0x14 0x24 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a +0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 +0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 +0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 +0x88 0x13 0x14 0x28 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a +0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 +0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 +0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 +0x14 0x2c 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 +0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 +0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 +0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x30 +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 +0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 +0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x34 0x01 0x0c +0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 +0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 +0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 +0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x38 0x01 0x0c 0x02 0x0c +0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a +0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 +0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 +0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x3c 0x01 0x0c 0x02 0x0c 0x03 0x0c +0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a +0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 +0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 +0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x40 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a +0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 +0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05>; + + marvell,caldata-txpwrlimit-5g-sub1 = /bits/ 8 < +0x01 0x00 0x06 0x00 0xaa 0x02 0x89 0x01 +0x3a 0x00 0x88 0x13 0x14 0x64 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a +0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 +0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 +0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 +0x88 0x13 0x14 0x68 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a +0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 +0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 +0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 +0x14 0x6c 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 +0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 +0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 +0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x70 +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 +0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 +0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x74 0x01 0x0c +0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 +0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 +0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 +0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x78 0x01 0x0c 0x02 0x0c +0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a +0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 +0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 +0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x7c 0x01 0x0c 0x02 0x0c 0x03 0x0c +0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a +0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 +0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 +0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x80 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a +0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 +0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 +0x3a 0x00 0x88 0x13 0x14 0x84 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a +0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 +0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 +0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 +0x88 0x13 0x14 0x88 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a +0x07 0x08 0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 +0x0f 0x08 0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 +0x17 0x04 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 +0x14 0x8c 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08 +0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08 +0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04 +0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05>; + + marvell,caldata-txpwrlimit-5g-sub2 = /bits/ 8 < +0x01 0x00 0x06 0x00 0x36 0x01 0x89 0x01 +0x3a 0x00 0x88 0x13 0x14 0x95 0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a +0x06 0x0a 0x07 0x08 0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 +0x0e 0x08 0x0f 0x08 0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 +0x16 0x04 0x17 0x04 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 +0x88 0x13 0x14 0x99 0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a +0x07 0x08 0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 +0x0f 0x08 0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 +0x17 0x04 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 +0x14 0x9d 0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08 +0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08 +0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04 +0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0xa1 +0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08 0x08 0x08 +0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08 0x10 0x04 +0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04 0x18 0x05 +0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0xa5 0x01 0x0b +0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08 0x08 0x08 0x09 0x08 +0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08 0x10 0x04 0x11 0x04 +0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04 0x18 0x05 0x19 0x05 +0x1a 0x05 0x1b 0x05>; + }; +}; + &sdmmc { disable-wp; pinctrl-names = "default"; From ab9640000d92d29a342656424d763c138d1dd66b Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Thu, 25 Jul 2019 09:26:38 -0700 Subject: [PATCH 04/13] ARM: dts: rockchip: move rk3288-veryon display settings into a separate file The chromebook .dtsi file contains common settings for veyron Chromebooks with eDP displays. Some veyron devices with a display aren't Chromebooks (e.g. 'tiger' aka 'AOpen Chromebase Mini'), move display related bits from the chromebook .dtsi into a separate file to avoid redundant DT settings. The new file is included from the chromebook .dtsi and can be included by non-Chromebook devices with a display. Signed-off-by: Matthias Kaehlcke Reviewed-by: Douglas Anderson Signed-off-by: Heiko Stuebner --- .../boot/dts/rk3288-veyron-chromebook.dtsi | 115 +--------------- arch/arm/boot/dts/rk3288-veyron-edp.dtsi | 124 ++++++++++++++++++ 2 files changed, 125 insertions(+), 114 deletions(-) create mode 100644 arch/arm/boot/dts/rk3288-veyron-edp.dtsi diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index 6a28ce345ba0..ffb60f880b39 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -10,6 +10,7 @@ #include #include "rk3288-veyron.dtsi" #include "rk3288-veyron-analog-audio.dtsi" +#include "rk3288-veyron-edp.dtsi" #include "rk3288-veyron-sdmmc.dtsi" / { @@ -18,50 +19,6 @@ aliases { i2c20 = &i2c_tunnel; }; - backlight: backlight { - compatible = "pwm-backlight"; - brightness-levels = < - 0 1 2 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; - default-brightness-level = <128>; - enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en>; - pwms = <&pwm0 0 1000000 0>; - post-pwm-on-delay-ms = <10>; - pwm-off-delay-ms = <10>; - }; - gpio-charger { compatible = "gpio-charger"; charger-type = "mains"; @@ -85,35 +42,6 @@ lid { }; }; - panel: panel { - compatible ="innolux,n116bge", "simple-panel"; - status = "okay"; - power-supply = <&vcc33_lcd>; - backlight = <&backlight>; - - panel-timing { - clock-frequency = <74250000>; - hactive = <1366>; - hfront-porch = <136>; - hback-porch = <60>; - hsync-len = <30>; - hsync-active = <0>; - vactive = <768>; - vfront-porch = <8>; - vback-porch = <12>; - vsync-len = <12>; - vsync-active = <0>; - }; - - ports { - panel_in: port { - panel_in_edp: endpoint { - remote-endpoint = <&edp_out_panel>; - }; - }; - }; - }; - /* A non-regulated voltage from power supply or battery */ vccsys: vccsys { compatible = "regulator-fixed"; @@ -155,33 +83,6 @@ vcc5v_otg: vcc5v-otg-regulator { }; }; -&edp { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&edp_hpd>; - - ports { - edp_out: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - edp_out_panel: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_in_edp>; - }; - }; - }; -}; - -&edp_phy { - status = "okay"; -}; - -&pwm0 { - status = "okay"; -}; - &rk808 { vcc11-supply = <&vcc_5v>; @@ -234,14 +135,6 @@ trackpad@15 { }; }; -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; - &pinctrl { pinctrl-0 = < /* Common for sleep and wake, but no owners */ @@ -264,12 +157,6 @@ &suspend_l_sleep &bt_dev_wake_sleep >; - backlight { - bl_en: bl-en { - rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - buttons { ap_lid_int_l: ap-lid-int-l { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi new file mode 100644 index 000000000000..c36fb0940478 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Veyron (and derivatives) fragment for the edp displays + * + * Copyright 2019 Google LLC + */ + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <128>; + enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + pwms = <&pwm0 0 1000000 0>; + post-pwm-on-delay-ms = <10>; + pwm-off-delay-ms = <10>; + }; + + panel: panel { + compatible ="innolux,n116bge", "simple-panel"; + status = "okay"; + power-supply = <&vcc33_lcd>; + backlight = <&backlight>; + + panel-timing { + clock-frequency = <74250000>; + hactive = <1366>; + hfront-porch = <136>; + hback-porch = <60>; + hsync-len = <30>; + hsync-active = <0>; + vactive = <768>; + vfront-porch = <8>; + vback-porch = <12>; + vsync-len = <12>; + vsync-active = <0>; + }; + + ports { + panel_in: port { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; + }; +}; + +&edp { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd>; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + edp_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + +&edp_phy { + status = "okay"; +}; + +&pwm0 { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&pinctrl { + backlight { + bl_en: bl-en { + rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; From 6b381a8e2c5f9667918cc1ed0e3daeec869b76b1 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Thu, 25 Jul 2019 09:26:39 -0700 Subject: [PATCH 05/13] ARM: dts: rockchip: consolidate veyron panel and backlight settings veyron jaq, jerry, minnie and speedy have mostly redundant regulator and pinctrl configurations for the panel/backlight. Consolidate these pieces in the eDP .dtsi. Also change the default power supply for the panel to 'panel_regulator', instead of overriding it in all the board files. pinky is the only device that uses 'vcc33_lcd' (the prior default), so overwrite it in this case. pinky doesn't have a complete display configuration, to keep things as they were delete the common nodes that didn't exist previously in pinky's board file. Reviewed-by: Douglas Anderson Signed-off-by: Matthias Kaehlcke Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-veyron-edp.dtsi | 51 ++++++++++++++++++- arch/arm/boot/dts/rk3288-veyron-jaq.dts | 55 -------------------- arch/arm/boot/dts/rk3288-veyron-jerry.dts | 58 ---------------------- arch/arm/boot/dts/rk3288-veyron-minnie.dts | 52 ------------------- arch/arm/boot/dts/rk3288-veyron-pinky.dts | 17 +++++++ arch/arm/boot/dts/rk3288-veyron-speedy.dts | 58 ---------------------- 6 files changed, 67 insertions(+), 224 deletions(-) diff --git a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi index c36fb0940478..719d936b7822 100644 --- a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi @@ -6,6 +6,40 @@ */ / { + backlight_regulator: backlight-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_pwr_en>; + regulator-name = "backlight_regulator"; + vin-supply = <&vcc33_sys>; + startup-delay-us = <15000>; + }; + + panel_regulator: panel-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_enable_h>; + regulator-name = "panel_regulator"; + startup-delay-us = <100000>; + vin-supply = <&vcc33_sys>; + }; + + vcc18_lcd: vcc18-lcd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&avdd_1v8_disp_en>; + regulator-name = "vcc18_lcd"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc18_wl>; + }; + backlight: backlight { compatible = "pwm-backlight"; brightness-levels = < @@ -48,12 +82,13 @@ backlight: backlight { pwms = <&pwm0 0 1000000 0>; post-pwm-on-delay-ms = <10>; pwm-off-delay-ms = <10>; + power-supply = <&backlight_regulator>; }; panel: panel { compatible ="innolux,n116bge", "simple-panel"; status = "okay"; - power-supply = <&vcc33_lcd>; + power-supply = <&panel_regulator>; backlight = <&backlight>; panel-timing { @@ -117,8 +152,22 @@ &vopl_mmu { &pinctrl { backlight { + bl_pwr_en: bl_pwr_en { + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + bl_en: bl-en { rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + lcd { + lcd_enable_h: lcd-en { + rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + avdd_1v8_disp_en: avdd-1v8-disp-en { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index fcd119168cb6..80386203e85b 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -16,40 +16,6 @@ / { "google,veyron-jaq-rev3", "google,veyron-jaq-rev2", "google,veyron-jaq-rev1", "google,veyron-jaq", "google,veyron", "rockchip,rk3288"; - - panel_regulator: panel-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_enable_h>; - regulator-name = "panel_regulator"; - startup-delay-us = <100000>; - vin-supply = <&vcc33_sys>; - }; - - vcc18_lcd: vcc18-lcd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&avdd_1v8_disp_en>; - regulator-name = "vcc18_lcd"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc18_wl>; - }; - - backlight_regulator: backlight-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_pwr_en>; - regulator-name = "backlight_regulator"; - vin-supply = <&vcc33_sys>; - startup-delay-us = <15000>; - }; }; &backlight { @@ -87,11 +53,6 @@ &backlight { 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; - power-supply = <&backlight_regulator>; -}; - -&panel { - power-supply = <&panel_regulator>; }; &rk808 { @@ -343,12 +304,6 @@ &gpio8 { }; &pinctrl { - backlight { - bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - buck-5v { drv_5v: drv-5v { rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; @@ -361,16 +316,6 @@ vcc50_hdmi_en: vcc50-hdmi-en { }; }; - lcd { - lcd_enable_h: lcd-en { - rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - pmic { dvs_1: dvs-1 { rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts index 5abb9d228b6c..a6ee44f0fe13 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -18,48 +18,6 @@ / { "google,veyron-jerry-rev5", "google,veyron-jerry-rev4", "google,veyron-jerry-rev3", "google,veyron-jerry", "google,veyron", "rockchip,rk3288"; - - panel_regulator: panel-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_enable_h>; - regulator-name = "panel_regulator"; - startup-delay-us = <100000>; - vin-supply = <&vcc33_sys>; - }; - - vcc18_lcd: vcc18-lcd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&avdd_1v8_disp_en>; - regulator-name = "vcc18_lcd"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc18_wl>; - }; - - backlight_regulator: backlight-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_pwr_en>; - regulator-name = "backlight_regulator"; - vin-supply = <&vcc33_sys>; - startup-delay-us = <15000>; - }; -}; - -&backlight { - power-supply = <&backlight_regulator>; -}; - -&panel { - power-supply= <&panel_regulator>; }; &rk808 { @@ -460,12 +418,6 @@ &gpio8 { }; &pinctrl { - backlight { - bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - buck-5v { drv_5v: drv-5v { rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; @@ -478,16 +430,6 @@ vcc50_hdmi_en: vcc50-hdmi-en { }; }; - lcd { - lcd_enable_h: lcd-en { - rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - pmic { dvs_1: dvs-1 { rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 4cc7d3659484..55955b082501 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -15,40 +15,6 @@ / { "google,veyron-minnie-rev0", "google,veyron-minnie", "google,veyron", "rockchip,rk3288"; - backlight_regulator: backlight-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_pwr_en>; - regulator-name = "backlight_regulator"; - vin-supply = <&vcc33_sys>; - startup-delay-us = <15000>; - }; - - panel_regulator: panel-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_enable_h>; - regulator-name = "panel_regulator"; - startup-delay-us = <100000>; - vin-supply = <&vcc33_sys>; - }; - - vcc18_lcd: vcc18-lcd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&avdd_1v8_disp_en>; - regulator-name = "vcc18_lcd"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc18_wl>; - }; - volume_buttons: volume-buttons { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -105,7 +71,6 @@ &backlight { 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; - power-supply = <&backlight_regulator>; }; &i2c_tunnel { @@ -137,7 +102,6 @@ touchscreen@10 { &panel { compatible = "auo,b101ean01", "simple-panel"; - power-supply= <&panel_regulator>; /delete-node/ panel-timing; @@ -411,12 +375,6 @@ &gpio8 { }; &pinctrl { - backlight { - bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - buck-5v { drv_5v: drv-5v { rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; @@ -439,16 +397,6 @@ vcc50_hdmi_en: vcc50-hdmi-en { }; }; - lcd { - lcd_enable_h: lcd-en { - rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - pmic { dvs_1: dvs-1 { rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index 9b6f4d9b03b6..f420499f300a 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -14,7 +14,14 @@ / { compatible = "google,veyron-pinky-rev2", "google,veyron-pinky", "google,veyron", "rockchip,rk3288"; + /delete-node/backlight-regulator; + /delete-node/panel-regulator; /delete-node/emmc-pwrseq; + /delete-node/vcc18-lcd; +}; + +&backlight { + /delete-property/power-supply; }; &emmc { @@ -52,7 +59,17 @@ &i2c3 { i2c-scl-rising-time-ns = <300>; }; +&panel { + power-supply = <&vcc33_lcd>; +}; + &pinctrl { + /delete-node/ lcd; + + backlight { + /delete-node/ bl_pwr_en; + }; + buttons { pwr_key_h: pwr-key-h { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index 9b140db04456..2f2989bc3f9c 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -16,44 +16,6 @@ / { "google,veyron-speedy-rev5", "google,veyron-speedy-rev4", "google,veyron-speedy-rev3", "google,veyron-speedy-rev2", "google,veyron-speedy", "google,veyron", "rockchip,rk3288"; - - panel_regulator: panel-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_enable_h>; - regulator-name = "panel_regulator"; - startup-delay-us = <100000>; - vin-supply = <&vcc33_sys>; - }; - - vcc18_lcd: vcc18-lcd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&avdd_1v8_disp_en>; - regulator-name = "vcc18_lcd"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc18_wl>; - }; - - backlight_regulator: backlight-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_pwr_en>; - regulator-name = "backlight_regulator"; - vin-supply = <&vcc33_sys>; - startup-delay-us = <15000>; - }; -}; - -&backlight { - power-supply = <&backlight_regulator>; }; &cpu_alert0 { @@ -83,10 +45,6 @@ &gpu_crit { temperature = <90000>; }; -&panel { - power-supply= <&panel_regulator>; -}; - &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; @@ -321,12 +279,6 @@ &gpio8 { }; &pinctrl { - backlight { - bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - buck-5v { drv_5v: drv-5v { rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; @@ -339,16 +291,6 @@ vcc50_hdmi_en: vcc50-hdmi-en { }; }; - lcd { - lcd_enable_h: lcd-en { - rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - pmic { dvs_1: dvs-1 { rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; From c6855f7bb66b6c0c53acc15d2012ebd15a681159 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Thu, 25 Jul 2019 09:26:40 -0700 Subject: [PATCH 06/13] dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-{fievel,tiger} Fievel is a Chromebox and Tiger a Chromebase with a 10" display and touchscreen. Tiger and Fievel are based on the same board. Signed-off-by: Matthias Kaehlcke Reviewed-by: Douglas Anderson Signed-off-by: Heiko Stuebner --- .../devicetree/bindings/arm/rockchip.yaml | 30 +++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 34865042f4e4..01eb1e107ea6 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -128,6 +128,21 @@ properties: - const: google,veyron - const: rockchip,rk3288 + - description: Google Fievel (AOPEN Chromebox Mini) + items: + - const: google,veyron-fievel-rev8 + - const: google,veyron-fievel-rev7 + - const: google,veyron-fievel-rev6 + - const: google,veyron-fievel-rev5 + - const: google,veyron-fievel-rev4 + - const: google,veyron-fievel-rev3 + - const: google,veyron-fievel-rev2 + - const: google,veyron-fievel-rev1 + - const: google,veyron-fievel-rev0 + - const: google,veyron-fievel + - const: google,veyron + - const: rockchip,rk3288 + - description: Google Gru (dev-board) items: - const: google,gru-rev15 @@ -311,6 +326,21 @@ properties: - const: google,veyron - const: rockchip,rk3288 + - description: Google Tiger (AOpen Chromebase Mini) + items: + - const: google,veyron-tiger-rev8 + - const: google,veyron-tiger-rev7 + - const: google,veyron-tiger-rev6 + - const: google,veyron-tiger-rev5 + - const: google,veyron-tiger-rev4 + - const: google,veyron-tiger-rev3 + - const: google,veyron-tiger-rev2 + - const: google,veyron-tiger-rev1 + - const: google,veyron-tiger-rev0 + - const: google,veyron-tiger + - const: google,veyron + - const: rockchip,rk3288 + - description: Haoyu MarsBoard RK3066 items: - const: haoyu,marsboard-rk3066 From 0067692b662e7dd99afa2f871e79e3e5aa5c3c5b Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Thu, 25 Jul 2019 09:26:41 -0700 Subject: [PATCH 07/13] ARM: dts: rockchip: add veyron-fievel board Also known as AOpen Chromebox Mini. Signed-off-by: Matthias Kaehlcke Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/rk3288-veyron-fievel.dts | 298 +++++++++++++++++++++ 2 files changed, 299 insertions(+) create mode 100644 arch/arm/boot/dts/rk3288-veyron-fievel.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9159fa2cea90..9fd1e075c624 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -919,6 +919,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-tinker.dtb \ rk3288-tinker-s.dtb \ rk3288-veyron-brain.dtb \ + rk3288-veyron-fievel.dtb \ rk3288-veyron-jaq.dtb \ rk3288-veyron-jerry.dtb \ rk3288-veyron-mickey.dtb \ diff --git a/arch/arm/boot/dts/rk3288-veyron-fievel.dts b/arch/arm/boot/dts/rk3288-veyron-fievel.dts new file mode 100644 index 000000000000..696566f72d30 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-fievel.dts @@ -0,0 +1,298 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Veyron Fievel Rev 0+ board device tree source + * + * Copyright 2016 Google, Inc + */ + +/dts-v1/; +#include "rk3288-veyron.dtsi" +#include "rk3288-veyron-analog-audio.dtsi" + +/ { + model = "Google Fievel"; + compatible = "google,veyron-fievel-rev8", "google,veyron-fievel-rev7", + "google,veyron-fievel-rev6", "google,veyron-fievel-rev5", + "google,veyron-fievel-rev4", "google,veyron-fievel-rev3", + "google,veyron-fievel-rev2", "google,veyron-fievel-rev1", + "google,veyron-fievel-rev0", "google,veyron-fievel", + "google,veyron", "rockchip,rk3288"; + + /delete-node/ bt-activity; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; + + /* + * vcc33_pmuio and vcc33_io is sourced directly from vcc33_sys, + * enabled by vcc_18 + */ + vcc33_io: vcc33-io { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_io"; + }; + + vcc5_host1: vcc5-host1-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio5 RK_PC1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_usb1_pwr_en>; + regulator-name = "vcc5_host1"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5_host2: vcc5-host2-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio5 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_usb2_pwr_en>; + regulator-name = "vcc5_host2"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v_otg: vcc5v-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_pwr_en>; + regulator-name = "vcc5_otg"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&gmac { + status = "okay"; + + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + phy-handle = <ðphy>; + phy-mode = "rgmii"; + phy-supply = <&vcc33_lan>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; + resets = <&cru SRST_MAC>; + reset-names = "stmmaceth"; + rx_delay = <0x10>; + tx_delay = <0x30>; + + /* Reset for the RTL8211 PHY which requires a 10-ms reset pulse (low) + * with a 30ms settling time. */ + snps,reset-gpio = <&gpio4 RK_PB0 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; + wakeup-source; + + mdio0 { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&rk808 { + dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>, + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; + + vcc6-supply = <&vcc33_sys>; + vcc10-supply = <&vcc33_sys>; + vcc11-supply = <&vcc_5v>; + vcc12-supply = <&vcc33_sys>; + + regulators { + /delete-node/ LDO_REG1; + + /* According to the schematic, vcc18_lcdt is for + * HDMI_AVDD_1V8 + */ + vcc18_lcdt: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vdd18_lcdt"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + /* This is not a pwren anymore, but the real power supply, + * vdd10_lcd for HDMI_AVDD_1V0 + */ + vdd10_lcd: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + /* for usb camera */ + vcc33_ccd: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_ccd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc33_lan: SWITCH_REG2 { + regulator-name = "vcc33_lan"; + }; + }; +}; + +&sdio0 { + #address-cells = <1>; + #size-cells = <0>; + + btmrvl: btmrvl@2 { + compatible = "marvell,sd8897-bt"; + reg = <2>; + interrupt-parent = <&gpio4>; + interrupts = ; + marvell,wakeup-pin = /bits/ 16 <13>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake>; + }; +}; + +&vcc50_hdmi { + enable-active-high; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc50_hdmi_en>; +}; + +&vcc_5v { + enable-active-high; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&drv_5v>; +}; + +&pinctrl { + pinctrl-names = "default", "sleep"; + pinctrl-0 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* Wake only */ + &bt_dev_wake_awake + &pwr_led1_on + + /* For usb bc1.2 */ + &usb_otg_ilim_sel + &usb_usb_ilim_sel + >; + + pinctrl-1 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* Sleep only */ + &bt_dev_wake_sleep + &pwr_led1_blink + >; + + buck-5v { + drv_5v: drv-5v { + rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gmac { + phy_rst: phy-rst { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; + }; + + phy_pmeb: phy-pmeb { + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_int: phy-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + hdmi { + vcc50_hdmi_en: vcc50-hdmi-en { + rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + pwr_led1_on: pwr-led1-on { + rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_output_low>; + }; + + pwr_led1_blink: pwr-led1-blink { + rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + pmic { + dvs_1: dvs-1 { + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + usb-bc12 { + usb_otg_ilim_sel: usb-otg-ilim-sel { + rockchip,pins = <6 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>; + }; + + usb_usb_ilim_sel: usb-usb-ilim-sel { + rockchip,pins = <5 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + usb-host { + hub_usb1_pwr_en: hub_usb1_pwr_en { + rockchip,pins = <5 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hub_usb2_pwr_en: hub_usb2_pwr_en { + rockchip,pins = <5 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_otg_pwr_en: usb_otg_pwr_en { + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; From 4a11458611fb17b4f21e5e7b2f24445c00e900e1 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Thu, 25 Jul 2019 09:26:42 -0700 Subject: [PATCH 08/13] ARM: dts: rockchip: add veyron-tiger board Also known as the AOpen Chromebase Mini. tiger and fievel are share the same board, tiger has a display and touchscreen, fievel not. Use the fievel .dts as base and add the extra bits. Signed-off-by: Matthias Kaehlcke Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/rk3288-veyron-tiger.dts | 125 ++++++++++++++++++++++ 2 files changed, 126 insertions(+) create mode 100644 arch/arm/boot/dts/rk3288-veyron-tiger.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9fd1e075c624..64b08922e75d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -927,6 +927,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-veyron-minnie.dtb \ rk3288-veyron-pinky.dtb \ rk3288-veyron-speedy.dtb \ + rk3288-veyron-tiger.dtb \ rk3288-vyasa.dtb dtb-$(CONFIG_ARCH_S3C24XX) += \ s3c2416-smdk2416.dtb diff --git a/arch/arm/boot/dts/rk3288-veyron-tiger.dts b/arch/arm/boot/dts/rk3288-veyron-tiger.dts new file mode 100644 index 000000000000..fae26d530841 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-tiger.dts @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Veyron Tiger Rev 0+ board device tree source + * + * Copyright 2016 Google, Inc + */ + +/dts-v1/; +#include "rk3288-veyron-fievel.dts" +#include "rk3288-veyron-edp.dtsi" + +/ { + model = "Google Tiger"; + compatible = "google,veyron-tiger-rev8", "google,veyron-tiger-rev7", + "google,veyron-tiger-rev6", "google,veyron-tiger-rev5", + "google,veyron-tiger-rev4", "google,veyron-tiger-rev3", + "google,veyron-tiger-rev2", "google,veyron-tiger-rev1", + "google,veyron-tiger-rev0", "google,veyron-tiger", + "google,veyron", "rockchip,rk3288"; + + /delete-node/ vcc18-lcd; + + vccsys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vccsys"; + regulator-boot-on; + regulator-always-on; + }; +}; + +&backlight { + /* Tiger panel PWM must be >= 1%, so start non-zero brightness at 3 */ + brightness-levels = < + 0 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; +}; + +&backlight_regulator { + vin-supply = <&vccsys>; +}; + +&i2c3 { + status = "okay"; + + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&gpio2>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&touch_int &touch_rst>; + reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>; + vcc33-supply = <&vcc33_io>; + vccio-supply = <&vcc33_io>; + wakeup-source; + }; +}; + +&panel { + compatible = "auo,b101ean01", "simple-panel"; + + /delete-node/ panel-timing; + + panel-timing { + clock-frequency = <66666667>; + hactive = <1280>; + hfront-porch = <18>; + hback-porch = <21>; + hsync-len = <32>; + vactive = <800>; + vfront-porch = <4>; + vback-porch = <8>; + vsync-len = <18>; + }; +}; + +&pinctrl { + lcd { + /delete-node/ avdd-1v8-disp-en; + }; + + touchscreen { + touch_int: touch-int { + rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + touch_rst: touch-rst { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; From a5021c4597913aad16d9d176cbd1de7fa514477e Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sat, 27 Jul 2019 16:27:35 +0200 Subject: [PATCH 09/13] ARM: dts: rockchip: Cleanup style around assignment operator Use a space before and after assignment operator to have consistent style. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3036.dtsi | 2 +- arch/arm/boot/dts/rk3288-evb.dtsi | 2 +- arch/arm/boot/dts/rk3288-tinker.dtsi | 12 ++++++------ arch/arm/boot/dts/rk3288-veyron-edp.dtsi | 2 +- 4 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 0290ea4edd32..c776321b2cc4 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -484,7 +484,7 @@ spi: spi@20074000 { compatible = "rockchip,rockchip-spi"; reg = <0x20074000 0x1000>; interrupts = ; - clocks =<&cru PCLK_SPI>, <&cru SCLK_SPI>; + clocks = <&cru PCLK_SPI>, <&cru SCLK_SPI>; clock-names = "apb-pclk","spi_pclk"; dmas = <&pdma 8>, <&pdma 9>; dma-names = "tx", "rx"; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 820440715302..2afd686b2033 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -97,7 +97,7 @@ ext_gmac: external-gmac-clock { }; panel: panel { - compatible ="lg,lp079qx1-sp0v", "simple-panel"; + compatible = "lg,lp079qx1-sp0v", "simple-panel"; backlight = <&backlight>; enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&lcd_cs>; diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi index 293576869546..81e4e953d4a4 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi @@ -47,13 +47,13 @@ gpio-leds { compatible = "gpio-leds"; act-led { - gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; - linux,default-trigger="mmc0"; + gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; }; heartbeat-led { - gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; - linux,default-trigger="heartbeat"; + gpios = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; }; pwr-led { @@ -443,7 +443,7 @@ &pwm0 { &saradc { vref-supply = <&vcc18_ldo1>; - status ="okay"; + status = "okay"; }; &sdmmc { @@ -516,7 +516,7 @@ &usb_host1 { }; &usb_otg { - status= "okay"; + status = "okay"; }; &vopb { diff --git a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi index 719d936b7822..d74b6205b022 100644 --- a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi @@ -86,7 +86,7 @@ backlight: backlight { }; panel: panel { - compatible ="innolux,n116bge", "simple-panel"; + compatible = "innolux,n116bge", "simple-panel"; status = "okay"; power-supply = <&panel_regulator>; backlight = <&backlight>; From 94562040da08611ca15eecb39c68be8caac4bf06 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Wed, 31 Jul 2019 08:15:27 -0700 Subject: [PATCH 10/13] ARM: dts: rockchip: A few fixes for veyron-{fievel,tiger} Fix/improve a few things for veyron fievel/tiger: - move 'vccsys' regulator from tiger to fievel, both boards have it (and tiger includes the fievel .dtsi) - move 'ext_gmac' node below regulators - fix GPIO ids of vcc5_host1 and vcc5_host2 regulators - remove reset configuration from 'gmac' node, this is already done in rk3288.dtsi - fixed style issues of some multi-line comments - switch 'vcc18_lcdt', 'vdd10_lcd' and 'vcc33_ccd' regulators off during suspend - no pull-up on the Bluetooth wake-up pin, there is an external pull-up. The signal is active low, add the 'bt_host_wake_l' pinctrl config - move BC 1.2 pins up in the pinctrl config to keep 'wake only' pins separate - add BC 1.2 pins to sleep config Fixes: 0067692b662e ("ARM: dts: rockchip: add veyron-fievel board") Reviewed-by: Douglas Anderson Signed-off-by: Matthias Kaehlcke Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-veyron-fievel.dts | 58 +++++++++++++--------- arch/arm/boot/dts/rk3288-veyron-tiger.dts | 7 --- arch/arm/boot/dts/rk3288-veyron.dtsi | 4 ++ 3 files changed, 38 insertions(+), 31 deletions(-) diff --git a/arch/arm/boot/dts/rk3288-veyron-fievel.dts b/arch/arm/boot/dts/rk3288-veyron-fievel.dts index 696566f72d30..65d029ccc907 100644 --- a/arch/arm/boot/dts/rk3288-veyron-fievel.dts +++ b/arch/arm/boot/dts/rk3288-veyron-fievel.dts @@ -20,11 +20,11 @@ / { /delete-node/ bt-activity; - ext_gmac: external-gmac-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; + vccsys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vccsys"; + regulator-boot-on; + regulator-always-on; }; /* @@ -41,7 +41,7 @@ vcc33_io: vcc33-io { vcc5_host1: vcc5-host1-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio5 RK_PC1 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PC2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hub_usb1_pwr_en>; regulator-name = "vcc5_host1"; @@ -52,7 +52,7 @@ vcc5_host1: vcc5-host1-regulator { vcc5_host2: vcc5-host2-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio5 RK_PC2 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hub_usb2_pwr_en>; regulator-name = "vcc5_host2"; @@ -70,6 +70,13 @@ vcc5v_otg: vcc5v-otg-regulator { regulator-always-on; regulator-boot-on; }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; }; &gmac { @@ -83,13 +90,13 @@ &gmac { phy-supply = <&vcc33_lan>; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; - resets = <&cru SRST_MAC>; - reset-names = "stmmaceth"; rx_delay = <0x10>; tx_delay = <0x30>; - /* Reset for the RTL8211 PHY which requires a 10-ms reset pulse (low) - * with a 30ms settling time. */ + /* + * Reset for the RTL8211 PHY which requires a 10-ms reset pulse (low) + * with a 30ms settling time. + */ snps,reset-gpio = <&gpio4 RK_PB0 0>; snps,reset-active-low; snps,reset-delays-us = <0 10000 30000>; @@ -120,7 +127,8 @@ &rk808 { regulators { /delete-node/ LDO_REG1; - /* According to the schematic, vcc18_lcdt is for + /* + * According to the schematic, vcc18_lcdt is for * HDMI_AVDD_1V8 */ vcc18_lcdt: LDO_REG2 { @@ -130,12 +138,12 @@ vcc18_lcdt: LDO_REG2 { regulator-max-microvolt = <1800000>; regulator-name = "vdd18_lcdt"; regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; + regulator-off-in-suspend; }; }; - /* This is not a pwren anymore, but the real power supply, + /* + * This is not a pwren anymore, but the real power supply, * vdd10_lcd for HDMI_AVDD_1V0 */ vdd10_lcd: LDO_REG7 { @@ -145,8 +153,7 @@ vdd10_lcd: LDO_REG7 { regulator-max-microvolt = <1000000>; regulator-name = "vdd10_lcd"; regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; + regulator-off-in-suspend; }; }; @@ -158,8 +165,7 @@ vcc33_ccd: LDO_REG8 { regulator-max-microvolt = <3300000>; regulator-name = "vcc33_ccd"; regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; + regulator-off-in-suspend; }; }; @@ -180,7 +186,7 @@ btmrvl: btmrvl@2 { interrupts = ; marvell,wakeup-pin = /bits/ 16 <13>; pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake>; + pinctrl-0 = <&bt_host_wake_l>; }; }; @@ -206,13 +212,13 @@ &ddr0_retention &ddrio_pwroff &global_pwroff - /* Wake only */ - &bt_dev_wake_awake - &pwr_led1_on - /* For usb bc1.2 */ &usb_otg_ilim_sel &usb_usb_ilim_sel + + /* Wake only */ + &bt_dev_wake_awake + &pwr_led1_on >; pinctrl-1 = < @@ -221,6 +227,10 @@ &ddr0_retention &ddrio_pwroff &global_pwroff + /* For usb bc1.2 */ + &usb_otg_ilim_sel + &usb_usb_ilim_sel + /* Sleep only */ &bt_dev_wake_sleep &pwr_led1_blink diff --git a/arch/arm/boot/dts/rk3288-veyron-tiger.dts b/arch/arm/boot/dts/rk3288-veyron-tiger.dts index fae26d530841..27557203ae33 100644 --- a/arch/arm/boot/dts/rk3288-veyron-tiger.dts +++ b/arch/arm/boot/dts/rk3288-veyron-tiger.dts @@ -19,13 +19,6 @@ / { "google,veyron", "rockchip,rk3288"; /delete-node/ vcc18-lcd; - - vccsys: vccsys { - compatible = "regulator-fixed"; - regulator-name = "vccsys"; - regulator-boot-on; - regulator-always-on; - }; }; &backlight { diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 8fc8eac699bf..7525e3dd1fc1 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -586,6 +586,10 @@ bt_host_wake: bt-host-wake { rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_down>; }; + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + /* * We run sdio0 at max speed; bump up drive strength. * We also have external pulls, so disable the internal ones. From 6f79fcc6c9e311d489989e0909d86c0762d3ac61 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Thu, 1 Aug 2019 15:03:54 -0700 Subject: [PATCH 11/13] ARM: dts: rockchip: Add pin names for rk3288-veyron fievel This is like commit 0ca87bd5baa6 ("ARM: dts: rockchip: Add pin names for rk3288-veyron-jerry") and other similar commits, but for the veyron fievel board (and tiger, which includes the fievel .dtsi). Signed-off-by: Matthias Kaehlcke Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-veyron-fievel.dts | 214 +++++++++++++++++++++ 1 file changed, 214 insertions(+) diff --git a/arch/arm/boot/dts/rk3288-veyron-fievel.dts b/arch/arm/boot/dts/rk3288-veyron-fievel.dts index 65d029ccc907..9a0f55085839 100644 --- a/arch/arm/boot/dts/rk3288-veyron-fievel.dts +++ b/arch/arm/boot/dts/rk3288-veyron-fievel.dts @@ -204,6 +204,220 @@ &vcc_5v { pinctrl-0 = <&drv_5v>; }; +&gpio0 { + gpio-line-names = "PMIC_SLEEP_AP", + "DDRIO_PWROFF", + "DDRIO_RETEN", + "TS3A227E_INT_L", + "PMIC_INT_L", + "PWR_KEY_L", + "HUB_USB1_nFALUT", + "PHY_PMEB", + + "PHY_INT", + "REC_MODE_L", + "OTP_OUT", + "", + "USB_OTG_POWER_EN", + "AP_WARM_RESET_H", + "USB_OTG_nFALUT", + "I2C0_SDA_PMIC", + + "I2C0_SCL_PMIC", + "DEVMODE_L", + "USB_INT"; +}; + +&gpio2 { + gpio-line-names = "CONFIG0", + "CONFIG1", + "CONFIG2", + "", + "", + "", + "", + "CONFIG3", + + "", + "EMMC_RST_L", + "", + "", + "BL_PWR_EN", + "", + "TOUCH_INT", + "TOUCH_RST", + + "I2C3_SCL_TP", + "I2C3_SDA_TP"; +}; + +&gpio3 { + gpio-line-names = "FLASH0_D0", + "FLASH0_D1", + "FLASH0_D2", + "FLASH0_D3", + "FLASH0_D4", + "FLASH0_D5", + "FLASH0_D6", + "FLASH0_D7", + + "VCC5V_GOOD_H", + "", + "", + "", + "", + "", + "", + "", + + "FLASH0_CS2/EMMC_CMD", + "", + "FLASH0_DQS/EMMC_CLKO", + "", + "", + "", + "", + "", + + "PHY_TXD2", + "PHY_TXD3", + "MAC_RXD2", + "MAC_RXD3", + "PHY_TXD0", + "PHY_TXD1", + "MAC_RXD0", + "MAC_RXD1"; +}; + +&gpio4 { + gpio-line-names = "MAC_MDC", + "MAC_RXDV", + "MAC_RXER", + "MAC_CLK", + "PHY_TXEN", + "MAC_MDIO", + "MAC_RXCLK", + "", + + "PHY_RST", + "PHY_TXCLK", + "", + "", + "", + "", + "", + "", + + "UART0_RXD", + "UART0_TXD", + "UART0_CTS_L", + "UART0_RTS_L", + "SDIO0_D0", + "SDIO0_D1", + "SDIO0_D2", + "SDIO0_D3", + + "SDIO0_CMD", + "SDIO0_CLK", + "BT_DEV_WAKE", + "", + "WIFI_ENABLE_H", + "BT_ENABLE_L", + "WIFI_HOST_WAKE", + "BT_HOST_WAKE"; +}; + +&gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "USB_OTG_CTL1", + "HUB_USB2_CTL1", + "HUB_USB2_PWR_EN", + "HUB_USB_ILIM_SEL", + + "USB_OTG_STATUS_L", + "HUB_USB1_CTL1", + "HUB_USB1_PWR_EN", + "VCC50_HDMI_EN"; +}; + +&gpio6 { + gpio-line-names = "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI", + "I2S0_SDO0", + "HP_DET_H", + "", + "INT_CODEC", + + "I2S0_CLK", + "I2C2_SDA", + "I2C2_SCL", + "MICDET", + "", + "", + "", + "", + + "HUB_USB2_nFALUT", + "USB_OTG_ILIM_SEL"; +}; + +&gpio7 { + gpio-line-names = "LCD_BL_PWM", + "PWM_LOG", + "BL_EN", + "PWR_LED1", + "TPM_INT_H", + "SPK_ON", + "FW_WP_AP", + "", + + "CPU_NMI", + "DVSOK", + "", + "EDP_HPD", + "DVS1", + "", + "LCD_EN", + "DVS2", + + "HDMI_CEC", + "I2C4_SDA", + "I2C4_SCL", + "I2C5_SDA_HDMI", + "I2C5_SCL_HDMI", + "5V_DRV", + "UART2_RXD", + "UART2_TXD"; +}; + +&gpio8 { + gpio-line-names = "RAM_ID0", + "RAM_ID1", + "RAM_ID2", + "RAM_ID3", + "I2C1_SDA_TPM", + "I2C1_SCL_TPM", + "SPI2_CLK", + "SPI2_CS0", + + "SPI2_RXD", + "SPI2_TXD"; +}; + &pinctrl { pinctrl-names = "default", "sleep"; pinctrl-0 = < From 3c29ba8e7c78dee1a8a59cadf235d6b93489a3b4 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Thu, 20 Jun 2019 11:20:56 -0700 Subject: [PATCH 12/13] Revert "ARM: dts: rockchip: add startup delay to rk3288-veyron panel-regulators" This reverts commit 1f45e8c6d0161f044d679f242fe7514e2625af4a. This 100 ms mystery delay is not on downstream kernels and no longer seems needed on upstream kernels either [1]. Presumably something in the meantime has made things better. A few possibilities for patches that have landed in the meantime that could have made this better are commit 3157694d8c7f ("pwm-backlight: Add support for PWM delays proprieties."), commit 5fb5caee92ba ("pwm-backlight: Enable/disable the PWM before/after LCD enable toggle."), and commit 6d5922dd0d60 ("ARM: dts: rockchip: set PWM delay backlight settings for Veyron") Let's revert and get our 100 ms back. [1] https://lkml.kernel.org/r/2226970.BAPq4liE1j@diego Signed-off-by: Douglas Anderson [rebased on top of the recent veyron display cleanup] Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-veyron-edp.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi index d74b6205b022..b12e061c5f7f 100644 --- a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi @@ -24,7 +24,6 @@ panel_regulator: panel-regulator { pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; - startup-delay-us = <100000>; vin-supply = <&vcc33_sys>; }; From dd7c66ac777a70e224e66593e95ce6d22147c919 Mon Sep 17 00:00:00 2001 From: Justin Swartz Date: Sun, 11 Aug 2019 23:00:13 +0000 Subject: [PATCH 13/13] ARM: dts: add device tree for Mecer Xtreme Mini S6 The Mecer Xtreme Mini S6 features a Rockchip RK3229 SoC, 1GB DDR3 RAM, 8GB eMMC, MicroSD port, 10/100Mbps Ethernet, Realtek 8723BS WLAN module, 2 x USB 2.0 ports, HDMI output, and S/PDIF output. Signed-off-by: Justin Swartz Reviewed-by: Rob Herring Signed-off-by: Heiko Stuebner --- .../devicetree/bindings/arm/rockchip.yaml | 5 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/rk3229-xms6.dts | 283 ++++++++++++++++++ 4 files changed, 291 insertions(+) create mode 100644 arch/arm/boot/dts/rk3229-xms6.dts diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 01eb1e107ea6..4a1a28e7a812 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -359,6 +359,11 @@ properties: - khadas,edge-v - const: rockchip,rk3399 + - description: Mecer Xtreme Mini S6 + items: + - const: mecer,xms6 + - const: rockchip,rk3229 + - description: mqmaker MiQi items: - const: mqmaker,miqi diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 6992bbbbffab..97992fccfc3d 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -549,6 +549,8 @@ patternProperties: description: mCube "^meas,.*": description: Measurement Specialties + "^mecer,.*": + description: Mustek Limited "^mediatek,.*": description: MediaTek Inc. "^megachips,.*": diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 64b08922e75d..a84a04cf894b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -905,6 +905,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3188-radxarock.dtb \ rk3228-evb.dtb \ rk3229-evb.dtb \ + rk3229-xms6.dtb \ rk3288-evb-act8846.dtb \ rk3288-evb-rk808.dtb \ rk3288-fennec.dtb \ diff --git a/arch/arm/boot/dts/rk3229-xms6.dts b/arch/arm/boot/dts/rk3229-xms6.dts new file mode 100644 index 000000000000..679fc2b00e5a --- /dev/null +++ b/arch/arm/boot/dts/rk3229-xms6.dts @@ -0,0 +1,283 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include +#include "rk3229.dtsi" + +/ { + model = "Mecer Xtreme Mini S6"; + compatible = "mecer,xms6", "rockchip,rk3229"; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + dc_12v: dc-12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + ext_gmac: ext_gmac { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + #clock-cells = <0>; + }; + + power-led { + compatible = "gpio-leds"; + + blue { + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + vcc_host: vcc-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + enable-active-high; + regulator-name = "vcc_phy"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vccio_1v8>; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vccio_1v8: vccio-1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "vccio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vccio_3v3: vccio-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vccio_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vdd_arm: vdd-arm-regulator { + compatible = "pwm-regulator"; + pwms = <&pwm1 0 25000 1>; + pwm-supply = <&vcc_sys>; + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_log: vdd-log-regulator { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + pwm-supply = <&vcc_sys>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + cap-mmc-highspeed; + disable-wp; + non-removable; + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC_SRC>; + assigned-clock-rates = <50000000>; + clock_in_out = "output"; + phy-handle = <&phy>; + phy-mode = "rmii"; + phy-supply = <&vcc_phy>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + phy: phy@0 { + compatible = "ethernet-phy-id1234.d400", + "ethernet-phy-ieee802.3-c22"; + reg = <0>; + clocks = <&cru SCLK_MAC_PHY>; + phy-is-integrated; + resets = <&cru SRST_MACPHY>; + }; + }; +}; + +&gpu { + mali-supply = <&vdd_log>; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_phy { + status = "okay"; +}; + +&iep_mmu { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + vccio1-supply = <&vccio_3v3>; + vccio2-supply = <&vccio_1v8>; + vccio4-supply = <&vccio_3v3>; +}; + +&pinctrl { + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&sdmmc { + cap-mmc-highspeed; + disable-wp; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_host: host-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; + + u2phy0_otg: otg-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_host: host-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; + + u2phy1_otg: otg-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; +}; + +&uart2 { + pinctrl-0 = <&uart21_xfer>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host2_ehci { + status = "okay"; +}; + +&usb_host2_ohci { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +};