mirror of https://gitee.com/openkylin/linux.git
Qualcomm ARM Based Device Tree Updates for v4.3
* Switch to use pinctrl compatible for GPIOs * Add RPM regulators for MSM8960 * Add SPI Ethernet support on MSM8960 CDP * Add SMEM support along with dependencies * Add PM8921 support for GPIO and MPP * Fix GSBI cell index * Switch to use real regulators on APQ8064 w/ SDCC -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJVuR9GAAoJEFKiBbHx2RXV9Q0P/2TXIsDmgFyyIA7edlqag3ch m0coBGVv20bP5wIrYHjQywBJqfCuQPm70jVsl2Voxzw/69jCvzHlzia6Aqm6f+sL jX941CpV7DVVACm0ltec3FqV33OZKRh9Eyz0Mq1jerrPsvwMnwGuAziH7zkzCNnr b9aLdWqWr68HZve/8naRAFWpm5mvWJhADnbKh2UryH6ZWaT8ueWdqnhy4oteo6MK sf0CWva9DdkH9GNE8F+N5ksOdV/a5IDdUVoujsaAaXJI/otqAoAn0PrzRTp1sV43 iAJKEAbAlhPKx/0YJIW1dpp8viyOcjAtNRpMLjA79HXF2yaYUlieLWYVhL851dKX L4MNyYRauQf+JIR6fGwSN7Tg+/G8ZF5m70EZXkoya5JGBTnXbgZ/e0tytu8MXs3E abiUeaYWFn4r1ta0V8glbk/iDlmNWcBUZz9NInrLzcjLOwq3+PJYdoq4mav5Qkrf cpByhFRHEV2jToZ7t/uyz8NndwLKnioFHzKb+o8L+B9qzB0r/pEdF143gRWlWV6W 2WGIUf2wCOBEMmaWhbGvGdYP1RghtjSKRGoaN4d3mxSD2lU9OvkARYETKtg4hwo4 y8cWOhx3sNsrAxs0GdzN4bh06LcnKYGUnpuqQb3o3GAjxY3xTFlhK0FDpXULCU2W c7A8yM5yN+csyAGl0r1/ =kyj6 -----END PGP SIGNATURE----- Merge tag 'qcom-dt-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm into next/dt Qualcomm ARM Based Device Tree Updates for v4.3 * Switch to use pinctrl compatible for GPIOs * Add RPM regulators for MSM8960 * Add SPI Ethernet support on MSM8960 CDP * Add SMEM support along with dependencies * Add PM8921 support for GPIO and MPP * Fix GSBI cell index * Switch to use real regulators on APQ8064 w/ SDCC * tag 'qcom-dt-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm: ARM: dts: qs600: Add real regulators to sdcc ARM: dts: ifc6410: add real regulators for sdcc nodes. ARM: dts: apq8064: remove temporary fixed regulator for mmc ARM: dts: apq8064: fix missing gsbi cell-index ARM: dts: apq8064: Add DT support for GSBI6 and for UART pin mux ARM: dts: apq8064: add pm8921 mpp support ARM: dts: apq8064: Add pm8921 mfd and its gpio node ARM: dts: msm8974: Add smem reservation and node ARM: dts: msm8974: Add tcsr mutex node ARM: dts: qcom: Add ks8851 node for wired ethernet ARM: dts: qcom: Add MSM8960 CDP RPM regulators ARM: dts: qcom: Add MSM8960 RPM and RPM regulator nodes ARM: dts: qcom: Replace gpio node with pinctrl node ARM: dts: qcom: Replace gpio node with pinctrl node Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson
commit
75d84eede4
|
|
@ -67,6 +67,12 @@ pm8921_l4: l4 {
|
|||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l5: l5 {
|
||||
regulator-min-microvolt = <2750000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l23: l23 {
|
||||
regulator-min-microvolt = <1700000>;
|
||||
regulator-max-microvolt = <1900000>;
|
||||
|
|
@ -140,19 +146,33 @@ usb4: usb@12530000 {
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
/* on board fixed 3.3v supply */
|
||||
v3p3_fixed: v3p3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "PCIE V3P3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
amba {
|
||||
/* eMMC */
|
||||
sdcc1: sdcc@12400000 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&pm8921_l5>;
|
||||
vqmmc-supply = <&pm8921_s4>;
|
||||
};
|
||||
|
||||
/* External micro SD card */
|
||||
sdcc3: sdcc@12180000 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&v3p3_fixed>;
|
||||
};
|
||||
/* WLAN */
|
||||
sdcc4: sdcc@121c0000 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&v3p3_fixed>;
|
||||
vqmmc-supply = <&v3p3_fixed>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -7,6 +7,7 @@ / {
|
|||
|
||||
aliases {
|
||||
serial0 = &gsbi7_serial;
|
||||
serial1 = &gsbi6_serial;
|
||||
};
|
||||
|
||||
soc {
|
||||
|
|
@ -73,6 +74,12 @@ pm8921_l4: l4 {
|
|||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l5: l5 {
|
||||
regulator-min-microvolt = <2750000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l6: l6 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
|
|
@ -84,9 +91,25 @@ pm8921_l23: l23 {
|
|||
regulator-max-microvolt = <1900000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_lvs1: lvs1 {
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ext_3p3v: regulator-fixed@1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "ext_3p3v";
|
||||
regulator-type = "voltage";
|
||||
startup-delay-us = <0>;
|
||||
gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
gsbi3: gsbi@16200000 {
|
||||
status = "okay";
|
||||
qcom,mode = <GSBI_PROT_I2C>;
|
||||
|
|
@ -115,6 +138,18 @@ eeprom: eeprom@52 {
|
|||
};
|
||||
};
|
||||
|
||||
gsbi@16500000 {
|
||||
status = "ok";
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
|
||||
serial@16540000 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart_pins>;
|
||||
};
|
||||
};
|
||||
|
||||
gsbi@16600000 {
|
||||
status = "ok";
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
|
|
@ -175,11 +210,14 @@ amba {
|
|||
/* eMMC */
|
||||
sdcc1: sdcc@12400000 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&pm8921_l5>;
|
||||
vqmmc-supply = <&pm8921_s4>;
|
||||
};
|
||||
|
||||
/* External micro SD card */
|
||||
sdcc3: sdcc@12180000 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&pm8921_l6>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&card_detect>;
|
||||
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
|
||||
|
|
@ -187,6 +225,8 @@ sdcc3: sdcc@12180000 {
|
|||
/* WLAN */
|
||||
sdcc4: sdcc@121c0000 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&ext_3p3v>;
|
||||
vqmmc-supply = <&pm8921_lvs1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -6,7 +6,6 @@
|
|||
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
|
||||
#include <dt-bindings/soc/qcom,gsbi.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
/ {
|
||||
model = "Qualcomm APQ8064";
|
||||
compatible = "qcom,apq8064";
|
||||
|
|
@ -127,6 +126,13 @@ mux {
|
|||
function = "gsbi3";
|
||||
};
|
||||
};
|
||||
|
||||
uart_pins: uart_pins {
|
||||
mux {
|
||||
pins = "gpio14", "gpio15", "gpio16", "gpio17";
|
||||
function = "gsbi6";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
intc: interrupt-controller@2000000 {
|
||||
|
|
@ -243,13 +249,13 @@ i2c2: i2c@124a0000 {
|
|||
gsbi3: gsbi@16200000 {
|
||||
status = "disabled";
|
||||
compatible = "qcom,gsbi-v1.0.0";
|
||||
cell-index = <3>;
|
||||
reg = <0x16200000 0x100>;
|
||||
clocks = <&gcc GSBI3_H_CLK>;
|
||||
clock-names = "iface";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
i2c3: i2c@16280000 {
|
||||
compatible = "qcom,i2c-qup-v1.1.1";
|
||||
reg = <0x16280000 0x1000>;
|
||||
|
|
@ -260,6 +266,28 @@ i2c3: i2c@16280000 {
|
|||
};
|
||||
};
|
||||
|
||||
gsbi6: gsbi@16500000 {
|
||||
status = "disabled";
|
||||
compatible = "qcom,gsbi-v1.0.0";
|
||||
cell-index = <6>;
|
||||
reg = <0x16500000 0x03>;
|
||||
clocks = <&gcc GSBI6_H_CLK>;
|
||||
clock-names = "iface";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
gsbi6_serial: serial@16540000 {
|
||||
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
||||
reg = <0x16540000 0x100>,
|
||||
<0x16500000 0x03>;
|
||||
interrupts = <0 156 0x0>;
|
||||
clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
gsbi7: gsbi@16600000 {
|
||||
status = "disabled";
|
||||
compatible = "qcom,gsbi-v1.0.0";
|
||||
|
|
@ -287,6 +315,53 @@ qcom,ssbi@500000 {
|
|||
compatible = "qcom,ssbi";
|
||||
reg = <0x00500000 0x1000>;
|
||||
qcom,controller-type = "pmic-arbiter";
|
||||
|
||||
pmicintc: pmic@0 {
|
||||
compatible = "qcom,pm8921";
|
||||
interrupt-parent = <&tlmm_pinmux>;
|
||||
interrupts = <74 8>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pm8921_gpio: gpio@150 {
|
||||
|
||||
compatible = "qcom,pm8921-gpio";
|
||||
reg = <0x150>;
|
||||
interrupts = <192 1>, <193 1>, <194 1>,
|
||||
<195 1>, <196 1>, <197 1>,
|
||||
<198 1>, <199 1>, <200 1>,
|
||||
<201 1>, <202 1>, <203 1>,
|
||||
<204 1>, <205 1>, <206 1>,
|
||||
<207 1>, <208 1>, <209 1>,
|
||||
<210 1>, <211 1>, <212 1>,
|
||||
<213 1>, <214 1>, <215 1>,
|
||||
<216 1>, <217 1>, <218 1>,
|
||||
<219 1>, <220 1>, <221 1>,
|
||||
<222 1>, <223 1>, <224 1>,
|
||||
<225 1>, <226 1>, <227 1>,
|
||||
<228 1>, <229 1>, <230 1>,
|
||||
<231 1>, <232 1>, <233 1>,
|
||||
<234 1>, <235 1>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
};
|
||||
|
||||
pm8921_mpps: mpps@50 {
|
||||
compatible = "qcom,pm8921-mpp";
|
||||
reg = <0x50>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupts =
|
||||
<128 1>, <129 1>, <130 1>, <131 1>,
|
||||
<132 1>, <133 1>, <134 1>, <135 1>,
|
||||
<136 1>, <137 1>, <138 1>, <139 1>;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
gcc: clock-controller@900000 {
|
||||
|
|
@ -448,14 +523,6 @@ sata0: sata@29000000 {
|
|||
};
|
||||
|
||||
/* Temporary fixed regulator */
|
||||
vsdcc_fixed: vsdcc-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "SDCC Power";
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sdcc1bam:dma@12402000{
|
||||
compatible = "qcom,bam-v1.3.0";
|
||||
reg = <0x12402000 0x8000>;
|
||||
|
|
@ -505,7 +572,6 @@ sdcc1: sdcc@12400000 {
|
|||
non-removable;
|
||||
cap-sd-highspeed;
|
||||
cap-mmc-highspeed;
|
||||
vmmc-supply = <&vsdcc_fixed>;
|
||||
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
|
@ -524,7 +590,6 @@ sdcc3: sdcc@12180000 {
|
|||
cap-mmc-highspeed;
|
||||
max-frequency = <192000000>;
|
||||
no-1-8-v;
|
||||
vmmc-supply = <&vsdcc_fixed>;
|
||||
dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
|
@ -542,8 +607,6 @@ sdcc4: sdcc@121c0000 {
|
|||
cap-sd-highspeed;
|
||||
cap-mmc-highspeed;
|
||||
max-frequency = <48000000>;
|
||||
vmmc-supply = <&vsdcc_fixed>;
|
||||
vqmmc-supply = <&vsdcc_fixed>;
|
||||
dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default";
|
||||
|
|
|
|||
|
|
@ -67,15 +67,16 @@ timer@2000000 {
|
|||
cpu-offset = <0x40000>;
|
||||
};
|
||||
|
||||
msmgpio: gpio@800000 {
|
||||
compatible = "qcom,msm-gpio";
|
||||
reg = <0x00800000 0x4000>;
|
||||
tlmm: pinctrl@800000 {
|
||||
compatible = "qcom,msm8660-pinctrl";
|
||||
reg = <0x800000 0x4000>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
ngpio = <173>;
|
||||
interrupts = <0 16 0x4>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
};
|
||||
|
||||
gcc: clock-controller@900000 {
|
||||
|
|
@ -115,7 +116,7 @@ qcom,ssbi@500000 {
|
|||
|
||||
pmicintc: pmic@0 {
|
||||
compatible = "qcom,pm8058";
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <88 8>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
|
|||
|
|
@ -26,6 +26,308 @@ sdcc3: sdcc@12180000 {
|
|||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
rpm@108000 {
|
||||
regulators {
|
||||
compatible = "qcom,rpm-pm8921-regulators";
|
||||
vin_lvs1_3_6-supply = <&pm8921_s4>;
|
||||
vin_lvs2-supply = <&pm8921_s4>;
|
||||
vin_lvs4_5_7-supply = <&pm8921_s4>;
|
||||
vdd_ncp-supply = <&pm8921_l6>;
|
||||
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
|
||||
vdd_l21_l23_l29-supply = <&pm8921_s8>;
|
||||
vdd_l24-supply = <&pm8921_s1>;
|
||||
vdd_l25-supply = <&pm8921_s1>;
|
||||
vdd_l27-supply = <&pm8921_s7>;
|
||||
vdd_l28-supply = <&pm8921_s7>;
|
||||
|
||||
/* Buck SMPS */
|
||||
pm8921_s1: s1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
qcom,switch-mode-frequency = <3200000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_s2: s2 {
|
||||
regulator-min-microvolt = <1300000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
qcom,switch-mode-frequency = <1600000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_s3: s3 {
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
qcom,switch-mode-frequency = <4800000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_s4: s4 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
qcom,switch-mode-frequency = <1600000>;
|
||||
bias-pull-down;
|
||||
qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
|
||||
};
|
||||
|
||||
pm8921_s7: s7 {
|
||||
regulator-min-microvolt = <1150000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
qcom,switch-mode-frequency = <3200000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_s8: s8 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
qcom,switch-mode-frequency = <1600000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
/* PMOS LDO */
|
||||
pm8921_l1: l1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l2: l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l3: l3 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l4: l4 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l5: l5 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l6: l6 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l7: l7 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1850000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l8: l8 {
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l9: l9 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l10: l10 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l11: l11 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l12: l12 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l14: l14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l15: l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l16: l16 {
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l17: l17 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l18: l18 {
|
||||
regulator-min-microvolt = <1300000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l21: l21 {
|
||||
regulator-min-microvolt = <1900000>;
|
||||
regulator-max-microvolt = <1900000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l22: l22 {
|
||||
regulator-min-microvolt = <2750000>;
|
||||
regulator-max-microvolt = <2750000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l23: l23 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l24: l24 {
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_l25: l25 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1250000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
/* Low Voltage Switch */
|
||||
pm8921_lvs1: lvs1 {
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_lvs2: lvs2 {
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_lvs3: lvs3 {
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_lvs4: lvs4 {
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_lvs5: lvs5 {
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_lvs6: lvs6 {
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_lvs7: lvs7 {
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_ncp: ncp {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
qcom,switch-mode-frequency = <1600000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gsbi@16000000 {
|
||||
status = "ok";
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi1_default>;
|
||||
spi@16080000 {
|
||||
status = "ok";
|
||||
eth@0 {
|
||||
compatible = "micrel,ks8851";
|
||||
reg = <0>;
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupts = <90 8>;
|
||||
spi-max-frequency = <5400000>;
|
||||
vdd-supply = <&ext_l2>;
|
||||
vdd-io-supply = <&pm8921_lvs6>;
|
||||
reset-gpios = <&msmgpio 89 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl@800000 {
|
||||
spi1_default: spi1_default {
|
||||
mux {
|
||||
pins = "gpio6", "gpio7", "gpio9";
|
||||
function = "gsbi1";
|
||||
};
|
||||
|
||||
mosi {
|
||||
pins = "gpio6";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
miso {
|
||||
pins = "gpio7";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio8";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
output-low;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio9";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
|
||||
ext_l2: gpio-regulator@91 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "ext_l2";
|
||||
gpio = <&msmgpio 91 0>;
|
||||
startup-delay-us = <10000>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -4,6 +4,7 @@
|
|||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
|
||||
#include <dt-bindings/mfd/qcom-rpm.h>
|
||||
#include <dt-bindings/soc/qcom,gsbi.h>
|
||||
|
||||
/ {
|
||||
|
|
@ -73,11 +74,10 @@ timer@200a000 {
|
|||
cpu-offset = <0x80000>;
|
||||
};
|
||||
|
||||
msmgpio: gpio@800000 {
|
||||
compatible = "qcom,msm-gpio";
|
||||
msmgpio: pinctrl@800000 {
|
||||
compatible = "qcom,msm8960-pinctrl";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
ngpio = <150>;
|
||||
interrupts = <0 16 0x4>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
|
@ -105,6 +105,24 @@ clock-controller@4000000 {
|
|||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
l2cc: clock-controller@2011000 {
|
||||
compatible = "syscon";
|
||||
reg = <0x2011000 0x1000>;
|
||||
};
|
||||
|
||||
rpm@108000 {
|
||||
compatible = "qcom,rpm-msm8960";
|
||||
reg = <0x108000 0x1000>;
|
||||
qcom,ipc = <&l2cc 0x8 2>;
|
||||
|
||||
interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
|
||||
interrupt-names = "ack", "err", "wakeup";
|
||||
|
||||
regulators {
|
||||
compatible = "qcom,rpm-pm8921-regulators";
|
||||
};
|
||||
};
|
||||
|
||||
acc0: clock-controller@2088000 {
|
||||
compatible = "qcom,kpss-acc-v1";
|
||||
reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
|
||||
|
|
@ -253,5 +271,30 @@ tcsr: syscon@1a400000 {
|
|||
compatible = "qcom,tcsr-msm8960", "syscon";
|
||||
reg = <0x1a400000 0x100>;
|
||||
};
|
||||
|
||||
gsbi@16000000 {
|
||||
compatible = "qcom,gsbi-v1.0.0";
|
||||
cell-index = <1>;
|
||||
reg = <0x16000000 0x100>;
|
||||
clocks = <&gcc GSBI1_H_CLK>;
|
||||
clock-names = "iface";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
spi@16080000 {
|
||||
compatible = "qcom,spi-qup-v1.1.1";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x16080000 0x1000>;
|
||||
interrupts = <0 147 0>;
|
||||
spi-max-frequency = <24000000>;
|
||||
cs-gpios = <&msmgpio 8 0>;
|
||||
|
||||
clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -9,6 +9,17 @@ / {
|
|||
compatible = "qcom,msm8974";
|
||||
interrupt-parent = <&intc>;
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
smem_region: smem@fa00000 {
|
||||
reg = <0xfa00000 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -220,6 +231,11 @@ gcc: clock-controller@fc400000 {
|
|||
reg = <0xfc400000 0x4000>;
|
||||
};
|
||||
|
||||
tcsr_mutex_block: syscon@fd484000 {
|
||||
compatible = "syscon";
|
||||
reg = <0xfd484000 0x2000>;
|
||||
};
|
||||
|
||||
mmcc: clock-controller@fd8c0000 {
|
||||
compatible = "qcom,mmcc-msm8974";
|
||||
#clock-cells = <1>;
|
||||
|
|
@ -227,6 +243,22 @@ mmcc: clock-controller@fd8c0000 {
|
|||
reg = <0xfd8c0000 0x6000>;
|
||||
};
|
||||
|
||||
tcsr_mutex: tcsr-mutex {
|
||||
compatible = "qcom,tcsr-mutex";
|
||||
syscon = <&tcsr_mutex_block 0 0x80>;
|
||||
|
||||
#hwlock-cells = <1>;
|
||||
};
|
||||
|
||||
smem@fa00000 {
|
||||
compatible = "qcom,smem";
|
||||
|
||||
memory-region = <&smem_region>;
|
||||
reg = <0xfc428000 0x4000>;
|
||||
|
||||
hwlocks = <&tcsr_mutex 3>;
|
||||
};
|
||||
|
||||
serial@f991e000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0xf991e000 0x1000>;
|
||||
|
|
|
|||
Loading…
Reference in New Issue