openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

MCS7830 USB-Ether: add Rx error support 

ChangeLog:
- evaluate Rx error statistics from trailing Rx status byte
- add driver TODO list
- add myself to authors

Quilt series run-tested, based on 2.6.33-rc4 (net-2.6.git mcs7830 has idle history,
should be good to go).

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Andreas Mohr 2010-01-31 02:58:19 +00:00 committed by David S. Miller
parent cdaff1854f
commit 76802851b6
1 changed files with 42 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

43
drivers/net/usb/mcs7830.c
View File

@ -3,11 +3,27 @@
*
* based on usbnet.c, asix.c and the vendor provided mcs7830 driver
*
* Copyright (C) 2010 Andreas Mohr <andi@lisas.de>
* Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>
* Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
* Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
* Copyright (c) 2002-2003 TiVo Inc.
*
* Definitions gathered from MOSCHIP, Data Sheet_7830DA.pdf (thanks!).
*
* TODO:
* - add .reset_resume support (iface is _gone_ after resume w/ power loss)
* - verify that mcs7830_get_regs() does have same output pre-/post-suspend
* - support HIF_REG_CONFIG_SLEEPMODE/HIF_REG_CONFIG_TXENABLE (via autopm?)
* - implement ethtool_ops get_pauseparam/set_pauseparam
* via HIF_REG_PAUSE_THRESHOLD (>= revision C only!)
* - implement get_eeprom/[set_eeprom]
* - switch PHY on/off on ifup/ifdown (perhaps in usbnet.c, via MII)
* - mcs7830_get_regs() handling is weird: for rev 2 we return 32 regs,
* can access only ~ 24, remaining user buffer is uninitialized garbage
* - anything else?
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@ -83,6 +99,17 @@ enum {
HIF_REG_PAUSE_THRESHOLD_DEFAULT = 0,
};
/* Trailing status byte in Ethernet Rx frame */
enum {
MCS7830_RX_SHORT_FRAME = 0x01, /* < 64 bytes */
MCS7830_RX_LENGTH_ERROR = 0x02, /* framelen != Ethernet length field */
MCS7830_RX_ALIGNMENT_ERROR = 0x04, /* non-even number of nibbles */
MCS7830_RX_CRC_ERROR = 0x08,
MCS7830_RX_LARGE_FRAME = 0x10, /* > 1518 bytes */
MCS7830_RX_FRAME_CORRECT = 0x20, /* frame is correct */
/* [7:6] reserved */
};
struct mcs7830_data {
u8 multi_filter[8];
u8 config;
@ -539,9 +566,23 @@ static int mcs7830_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
skb_trim(skb, skb->len - 1);
status = skb->data[skb->len];
if (status != 0x20)
if (status != MCS7830_RX_FRAME_CORRECT) {
dev_dbg(&dev->udev->dev, "rx fixup status %x\n", status);
/* hmm, perhaps usbnet.c already sees a globally visible
frame error and increments rx_errors on its own already? */
dev->net->stats.rx_errors++;
if (status & (MCS7830_RX_SHORT_FRAME
|MCS7830_RX_LENGTH_ERROR
|MCS7830_RX_LARGE_FRAME))
dev->net->stats.rx_length_errors++;
if (status & MCS7830_RX_ALIGNMENT_ERROR)
dev->net->stats.rx_frame_errors++;
if (status & MCS7830_RX_CRC_ERROR)
dev->net->stats.rx_crc_errors++;
}
return skb->len > 0;
}