From 76b17e6e4923e4138ed9a4d480cba148ff239dc9 Mon Sep 17 00:00:00 2001 From: Julius Werner Date: Thu, 26 Mar 2015 16:30:25 -0700 Subject: [PATCH] spi/rockchip: Add device tree property to configure Rx Sample Delay We have found that we can sometimes see read failures on boards with high-capacitance SPI lines. It seems that the controller samples the Rx data line too early, and its register interface has an "Rx Sample Delay" setting to fine-tune against this issue. This patch adds a new optional device tree entry that can configure this delay in terms of nanoseconds. The kernel will calculate the best-fitting amount of parent clock ticks to program the controller with based on that. Signed-off-by: Julius Werner Signed-off-by: Mark Brown --- .../devicetree/bindings/spi/spi-rockchip.txt | 4 ++++ drivers/spi/spi-rockchip.c | 21 +++++++++++++++++++ 2 files changed, 25 insertions(+) diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt index 467dec441c62..0c491bda4c65 100644 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt @@ -24,6 +24,9 @@ Optional Properties: - dmas: DMA specifiers for tx and rx dma. See the DMA client binding, Documentation/devicetree/bindings/dma/dma.txt - dma-names: DMA request names should include "tx" and "rx" if present. +- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling + Rx data (may need to be fine tuned for high capacitance lines). + No delay (0) by default. Example: @@ -33,6 +36,7 @@ Example: reg = <0xff110000 0x1000>; dmas = <&pdma1 11>, <&pdma1 12>; dma-names = "tx", "rx"; + rx-sample-delay-ns = <10>; #address-cells = <1>; #size-cells = <0>; interrupts = ; diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 25003c408c92..f65384b3417f 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -179,6 +179,7 @@ struct rockchip_spi { u8 tmode; u8 bpw; u8 n_bytes; + u8 rsd_nsecs; unsigned len; u32 speed; @@ -499,6 +500,7 @@ static void rockchip_spi_config(struct rockchip_spi *rs) { u32 div = 0; u32 dmacr = 0; + int rsd = 0; u32 cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); @@ -528,6 +530,20 @@ static void rockchip_spi_config(struct rockchip_spi *rs) div = max_t(u32, rs->max_freq / rs->speed, 1); div = (div + 1) & 0xfffe; + /* Rx sample delay is expressed in parent clock cycles (max 3) */ + rsd = DIV_ROUND_CLOSEST(rs->rsd_nsecs * (rs->max_freq >> 8), + 1000000000 >> 8); + if (!rsd && rs->rsd_nsecs) { + pr_warn_once("rockchip-spi: %u Hz are too slow to express %u ns delay\n", + rs->max_freq, rs->rsd_nsecs); + } else if (rsd > 3) { + rsd = 3; + pr_warn_once("rockchip-spi: %u Hz are too fast to express %u ns delay, clamping at %u ns\n", + rs->max_freq, rs->rsd_nsecs, + rsd * 1000000000U / rs->max_freq); + } + cr0 |= rsd << CR0_RSD_OFFSET; + writel_relaxed(cr0, rs->regs + ROCKCHIP_SPI_CTRLR0); writel_relaxed(rs->len - 1, rs->regs + ROCKCHIP_SPI_CTRLR1); @@ -620,6 +636,7 @@ static int rockchip_spi_probe(struct platform_device *pdev) struct rockchip_spi *rs; struct spi_master *master; struct resource *mem; + u32 rsd_nsecs; master = spi_alloc_master(&pdev->dev, sizeof(struct rockchip_spi)); if (!master) @@ -671,6 +688,10 @@ static int rockchip_spi_probe(struct platform_device *pdev) rs->dev = &pdev->dev; rs->max_freq = clk_get_rate(rs->spiclk); + if (!of_property_read_u32(pdev->dev.of_node, "rx-sample-delay-ns", + &rsd_nsecs)) + rs->rsd_nsecs = rsd_nsecs; + rs->fifo_len = get_fifo_len(rs); if (!rs->fifo_len) { dev_err(&pdev->dev, "Failed to get fifo length\n");