From 76f439df50aba1838e06dd01e5f20dada7473f57 Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Wed, 8 Oct 2014 15:47:05 +0200 Subject: [PATCH] regulator: Add ena_gpio_initialized to regulator_config Most drivers do not set the ena_gpio field of struct regulator_config before passing it to the regulator core. This is fine as long as the gpio identifier that is passed is a positive integer. But the gpio identifier 0 is also valid. So we are not able to decide wether we got a real gpio identifier or not based on a 0 in ena_gpio. To be able to decide if it is a valid gpio that got passed, this patch adds a ena_gpio_initialized field that should be set if was initialized with a correct value, either a gpio >= 0 or a negative error number. The core then checks if ena_gpio or ena_gpio_initialized before handling it as a gpio. This way we maintain backwards compatibility and fix the behaviour for gpio number 0. Signed-off-by: Markus Pargmann Signed-off-by: Mark Brown --- drivers/regulator/core.c | 3 ++- include/linux/regulator/driver.h | 4 ++++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index cd87c0c37034..55a87a2722d8 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -3650,7 +3650,8 @@ regulator_register(const struct regulator_desc *regulator_desc, dev_set_drvdata(&rdev->dev, rdev); - if (config->ena_gpio && gpio_is_valid(config->ena_gpio)) { + if ((config->ena_gpio || config->ena_gpio_initialized) && + gpio_is_valid(config->ena_gpio)) { ret = regulator_ena_gpio_request(rdev, config); if (ret != 0) { rdev_err(rdev, "Failed to request enable GPIO%d: %d\n", diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index fc0ee0ce8325..28da08e4671f 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -301,6 +301,9 @@ struct regulator_desc { * NULL). * @regmap: regmap to use for core regmap helpers if dev_get_regulator() is * insufficient. + * @ena_gpio_initialized: GPIO controlling regulator enable was properly + * initialized, meaning that >= 0 is a valid gpio + * identifier and < 0 is a non existent gpio. * @ena_gpio: GPIO controlling regulator enable. * @ena_gpio_invert: Sense for GPIO enable control. * @ena_gpio_flags: Flags to use when calling gpio_request_one() @@ -312,6 +315,7 @@ struct regulator_config { struct device_node *of_node; struct regmap *regmap; + bool ena_gpio_initialized; int ena_gpio; unsigned int ena_gpio_invert:1; unsigned int ena_gpio_flags;