Merge branch 'aquantia-usb'

Igor Russkikh says:

====================
Add support for Aquantia AQtion USB to 5/2.5GbE devices

This patchset introduces support for new multigig ethernet to USB dongle,
developed jointly by Aquantia (Phy) and ASIX (USB MAC).

The driver has similar structure with other ASIX MAC drivers (AX88179), but
with a number of important differences:
- Driver supports both direct Phy and custom firmware interface for Phy
  programming. This is due to different firmware modules available with
  this product.
- Driver handles new 2.5G/5G link speed configuration and reporting.
- Device support all speeds from 100M up to 5G.
- Device supports MTU up to 16K.

Device supports various standard networking features, like
checksum offloads, vlan tagging/filtering, TSO.

The code of this driver is based on original ASIX sources and was extended
by Aquantia for 5G multigig support.

Patchset v2 includes following changes:
- Function variables declarions fixed to reverse xmass tree
- Improve patch layout structure
- Remove unnecessary curly braces in switch/case statements
- Use 'packed' attribute for HW structures only
- Use eth_mac_addr function in set_mac_addr callback
- Remove unnecessary 'memset' calls.
- Read MAC address from EEPROM function has now better name
- Use driver_priv field to store context. It avoids ugly cast.
- Set max_mtu field. Remove check for MTU size
- Rewrite read/write functions. Add helpers for read/write 16/32 bit values
- Use mask and shifts instead of bitfields to support BE platforms.
- Use stack allocated buffer for configuring mcast filters
- Use AUTONEG_ENABLE when go to suspend state
- Pad out wol_cfg field from context structure. Use stack allocated instead
- Remove driver version
- Check field 'duplex' in set_link_ksetting callback as well
- Use already created defines in usb matching macro
- Rename phy_ops struct to phy_cfg
- Use ether_addr_copy for copying mac address
- Add fall-through comment in switch/case for avoid checkpatch warning
- Remove match for CDC ether device
- Add ASIX's HW id-s to match this driver
- Add all HW id-s with which driver can work to blacklist of cdc_ether driver

Patchset v3 includes following changes:
- Use linkmode_copy instead of bitmap_copy
- Remove Direct PHY access code since production HW will not have this
    mode anymore
- Fix line over 80 symbols and alignments in cdc_ether patch
- Add match for ECM configuration
    On start our HW reports both ECM and vendor configs.
    Linux prefers to use ECM driver and chooses active configuration
    which is for ecm driver (not for vendor specific).
    We need to match this configuration and forcibly switch configuration
    to vendor specific.

Patchset v4 includes following changes:
- Set gso_max_size.
- Optimize accessing to descriptors
- Use SKB_TRUESIZE macro.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/usb/Kconfig

@@ -613,4 +613,16 @@ config USB_NET_CH9200
 	  To compile this driver as a module, choose M here: the
 	  module will be called ch9200.
 
+config USB_NET_AQC111
+	tristate "Aquantia AQtion USB to 5/2.5GbE Controllers support"
+	depends on USB_USBNET
+	select CRC32
+	default y
+	help
+	  This option adds support for Aquantia AQtion USB
+	  Ethernet adapters based on AQC111U/AQC112 chips.
+
+	  This driver should work with at least the following devices:
+	  * Aquantia AQtion USB to 5GbE
+
 endif # USB_NET_DRIVERS

drivers/net/usb/Makefile

@@ -40,3 +40,4 @@ obj-$(CONFIG_USB_VL600)		+= lg-vl600.o
 obj-$(CONFIG_USB_NET_QMI_WWAN)	+= qmi_wwan.o
 obj-$(CONFIG_USB_NET_CDC_MBIM)	+= cdc_mbim.o
 obj-$(CONFIG_USB_NET_CH9200)	+= ch9200.o
+obj-$(CONFIG_USB_NET_AQC111)	+= aqc111.o

drivers/net/usb/aqc111.h

@@ -0,0 +1,232 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later
+ * Aquantia Corp. Aquantia AQtion USB to 5GbE Controller
+ * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (C) 2002-2003 TiVo Inc.
+ * Copyright (C) 2017-2018 ASIX
+ * Copyright (C) 2018 Aquantia Corp.
+ */
+
+#ifndef __LINUX_USBNET_AQC111_H
+#define __LINUX_USBNET_AQC111_H
+
+#define URB_SIZE	(1024 * 62)
+
+#define AQ_MCAST_FILTER_SIZE		8
+#define AQ_MAX_MCAST			64
+
+#define AQ_ACCESS_MAC			0x01
+#define AQ_FLASH_PARAMETERS		0x20
+#define AQ_PHY_POWER			0x31
+#define AQ_WOL_CFG			0x60
+#define AQ_PHY_OPS			0x61
+
+#define AQ_USB_PHY_SET_TIMEOUT		10000
+#define AQ_USB_SET_TIMEOUT		4000
+
+/* Feature. ********************************************/
+#define AQ_SUPPORT_FEATURE	(NETIF_F_SG | NETIF_F_IP_CSUM |\
+				 NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM |\
+				 NETIF_F_TSO | NETIF_F_HW_VLAN_CTAG_TX |\
+				 NETIF_F_HW_VLAN_CTAG_RX)
+
+#define AQ_SUPPORT_HW_FEATURE	(NETIF_F_SG | NETIF_F_IP_CSUM |\
+				 NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM |\
+				 NETIF_F_TSO | NETIF_F_HW_VLAN_CTAG_FILTER)
+
+#define AQ_SUPPORT_VLAN_FEATURE (NETIF_F_SG | NETIF_F_IP_CSUM |\
+				 NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM |\
+				 NETIF_F_TSO)
+
+/* SFR Reg. ********************************************/
+
+#define SFR_GENERAL_STATUS		0x03
+#define SFR_CHIP_STATUS			0x05
+#define SFR_RX_CTL			0x0B
+	#define SFR_RX_CTL_TXPADCRC		0x0400
+	#define SFR_RX_CTL_IPE			0x0200
+	#define SFR_RX_CTL_DROPCRCERR		0x0100
+	#define SFR_RX_CTL_START		0x0080
+	#define SFR_RX_CTL_RF_WAK		0x0040
+	#define SFR_RX_CTL_AP			0x0020
+	#define SFR_RX_CTL_AM			0x0010
+	#define SFR_RX_CTL_AB			0x0008
+	#define SFR_RX_CTL_AMALL		0x0002
+	#define SFR_RX_CTL_PRO			0x0001
+	#define SFR_RX_CTL_STOP			0x0000
+#define SFR_INTER_PACKET_GAP_0		0x0D
+#define SFR_NODE_ID			0x10
+#define SFR_MULTI_FILTER_ARRY		0x16
+#define SFR_MEDIUM_STATUS_MODE		0x22
+	#define SFR_MEDIUM_XGMIIMODE		0x0001
+	#define SFR_MEDIUM_FULL_DUPLEX		0x0002
+	#define SFR_MEDIUM_RXFLOW_CTRLEN	0x0010
+	#define SFR_MEDIUM_TXFLOW_CTRLEN	0x0020
+	#define SFR_MEDIUM_JUMBO_EN		0x0040
+	#define SFR_MEDIUM_RECEIVE_EN		0x0100
+#define SFR_MONITOR_MODE		0x24
+	#define SFR_MONITOR_MODE_EPHYRW		0x01
+	#define SFR_MONITOR_MODE_RWLC		0x02
+	#define SFR_MONITOR_MODE_RWMP		0x04
+	#define SFR_MONITOR_MODE_RWWF		0x08
+	#define SFR_MONITOR_MODE_RW_FLAG	0x10
+	#define SFR_MONITOR_MODE_PMEPOL		0x20
+	#define SFR_MONITOR_MODE_PMETYPE	0x40
+#define SFR_PHYPWR_RSTCTL		0x26
+	#define SFR_PHYPWR_RSTCTL_BZ		0x0010
+	#define SFR_PHYPWR_RSTCTL_IPRL		0x0020
+#define SFR_VLAN_ID_ADDRESS		0x2A
+#define SFR_VLAN_ID_CONTROL		0x2B
+	#define SFR_VLAN_CONTROL_WE		0x0001
+	#define SFR_VLAN_CONTROL_RD		0x0002
+	#define SFR_VLAN_CONTROL_VSO		0x0010
+	#define SFR_VLAN_CONTROL_VFE		0x0020
+#define SFR_VLAN_ID_DATA0		0x2C
+#define SFR_VLAN_ID_DATA1		0x2D
+#define SFR_RX_BULKIN_QCTRL		0x2E
+	#define SFR_RX_BULKIN_QCTRL_TIME	0x01
+	#define SFR_RX_BULKIN_QCTRL_IFG		0x02
+	#define SFR_RX_BULKIN_QCTRL_SIZE	0x04
+#define SFR_RX_BULKIN_QTIMR_LOW		0x2F
+#define SFR_RX_BULKIN_QTIMR_HIGH	0x30
+#define SFR_RX_BULKIN_QSIZE		0x31
+#define SFR_RX_BULKIN_QIFG		0x32
+#define SFR_RXCOE_CTL			0x34
+	#define SFR_RXCOE_IP			0x01
+	#define SFR_RXCOE_TCP			0x02
+	#define SFR_RXCOE_UDP			0x04
+	#define SFR_RXCOE_ICMP			0x08
+	#define SFR_RXCOE_IGMP			0x10
+	#define SFR_RXCOE_TCPV6			0x20
+	#define SFR_RXCOE_UDPV6			0x40
+	#define SFR_RXCOE_ICMV6			0x80
+#define SFR_TXCOE_CTL			0x35
+	#define SFR_TXCOE_IP			0x01
+	#define SFR_TXCOE_TCP			0x02
+	#define SFR_TXCOE_UDP			0x04
+	#define SFR_TXCOE_ICMP			0x08
+	#define SFR_TXCOE_IGMP			0x10
+	#define SFR_TXCOE_TCPV6			0x20
+	#define SFR_TXCOE_UDPV6			0x40
+	#define SFR_TXCOE_ICMV6			0x80
+#define SFR_BM_INT_MASK			0x41
+#define SFR_BMRX_DMA_CONTROL		0x43
+	#define SFR_BMRX_DMA_EN			0x80
+#define SFR_BMTX_DMA_CONTROL		0x46
+#define SFR_PAUSE_WATERLVL_LOW		0x54
+#define SFR_PAUSE_WATERLVL_HIGH		0x55
+#define SFR_ARC_CTRL			0x9E
+#define SFR_SWP_CTRL			0xB1
+#define SFR_TX_PAUSE_RESEND_T		0xB2
+#define SFR_ETH_MAC_PATH		0xB7
+	#define SFR_RX_PATH_READY		0x01
+#define SFR_BULK_OUT_CTRL		0xB9
+	#define SFR_BULK_OUT_FLUSH_EN		0x01
+	#define SFR_BULK_OUT_EFF_EN		0x02
+
+#define AQ_FW_VER_MAJOR			0xDA
+#define AQ_FW_VER_MINOR			0xDB
+#define AQ_FW_VER_REV			0xDC
+
+/*PHY_OPS**********************************************************************/
+
+#define AQ_ADV_100M	BIT(0)
+#define AQ_ADV_1G	BIT(1)
+#define AQ_ADV_2G5	BIT(2)
+#define AQ_ADV_5G	BIT(3)
+#define AQ_ADV_MASK	0x0F
+
+#define AQ_PAUSE	BIT(16)
+#define AQ_ASYM_PAUSE	BIT(17)
+#define AQ_LOW_POWER	BIT(18)
+#define AQ_PHY_POWER_EN	BIT(19)
+#define AQ_WOL		BIT(20)
+#define AQ_DOWNSHIFT	BIT(21)
+
+#define AQ_DSH_RETRIES_SHIFT	0x18
+#define AQ_DSH_RETRIES_MASK	0xF000000
+
+#define AQ_WOL_FLAG_MP			0x2
+
+/******************************************************************************/
+
+struct aqc111_wol_cfg {
+	u8 hw_addr[6];
+	u8 flags;
+	u8 rsvd[283];
+} __packed;
+
+#define WOL_CFG_SIZE sizeof(struct aqc111_wol_cfg)
+
+struct aqc111_data {
+	u16 rxctl;
+	u8 rx_checksum;
+	u8 link_speed;
+	u8 link;
+	u8 autoneg;
+	u32 advertised_speed;
+	struct {
+		u8 major;
+		u8 minor;
+		u8 rev;
+	} fw_ver;
+	u32 phy_cfg;
+	u8 wol_flags;
+};
+
+#define AQ_LS_MASK		0x8000
+#define AQ_SPEED_MASK		0x7F00
+#define AQ_SPEED_SHIFT		0x0008
+#define AQ_INT_SPEED_5G		0x000F
+#define AQ_INT_SPEED_2_5G	0x0010
+#define AQ_INT_SPEED_1G		0x0011
+#define AQ_INT_SPEED_100M	0x0013
+
+/* TX Descriptor */
+#define AQ_TX_DESC_LEN_MASK	0x1FFFFF
+#define AQ_TX_DESC_DROP_PADD	BIT(28)
+#define AQ_TX_DESC_VLAN		BIT(29)
+#define AQ_TX_DESC_MSS_MASK	0x7FFF
+#define AQ_TX_DESC_MSS_SHIFT	0x20
+#define AQ_TX_DESC_VLAN_MASK	0xFFFF
+#define AQ_TX_DESC_VLAN_SHIFT	0x30
+
+#define AQ_RX_HW_PAD			0x02
+
+/* RX Packet Descriptor */
+#define AQ_RX_PD_L4_ERR		BIT(0)
+#define AQ_RX_PD_L3_ERR		BIT(1)
+#define AQ_RX_PD_L4_TYPE_MASK	0x1C
+#define AQ_RX_PD_L4_UDP		0x04
+#define AQ_RX_PD_L4_TCP		0x10
+#define AQ_RX_PD_L3_TYPE_MASK	0x60
+#define AQ_RX_PD_L3_IP		0x20
+#define AQ_RX_PD_L3_IP6		0x40
+
+#define AQ_RX_PD_VLAN		BIT(10)
+#define AQ_RX_PD_RX_OK		BIT(11)
+#define AQ_RX_PD_DROP		BIT(31)
+#define AQ_RX_PD_LEN_MASK	0x7FFF0000
+#define AQ_RX_PD_LEN_SHIFT	0x10
+#define AQ_RX_PD_VLAN_SHIFT	0x20
+
+/* RX Descriptor header */
+#define AQ_RX_DH_PKT_CNT_MASK		0x1FFF
+#define AQ_RX_DH_DESC_OFFSET_MASK	0xFFFFE000
+#define AQ_RX_DH_DESC_OFFSET_SHIFT	0x0D
+
+static struct {
+	unsigned char ctrl;
+	unsigned char timer_l;
+	unsigned char timer_h;
+	unsigned char size;
+	unsigned char ifg;
+} AQC111_BULKIN_SIZE[] = {
+	/* xHCI & EHCI & OHCI */
+	{7, 0x00, 0x01, 0x1E, 0xFF},/* 10G, 5G, 2.5G, 1G */
+	{7, 0xA0, 0x00, 0x14, 0x00},/* 100M */
+	/* Jumbo packet */
+	{7, 0x00, 0x01, 0x18, 0xFF},
+};
+
+#endif /* __LINUX_USBNET_AQC111_H */

drivers/net/usb/cdc_ether.c

@@ -562,6 +562,8 @@ static const struct driver_info wwan_info = {
 #define MICROSOFT_VENDOR_ID	0x045e
 #define UBLOX_VENDOR_ID		0x1546
 #define TPLINK_VENDOR_ID	0x2357
+#define AQUANTIA_VENDOR_ID	0x2eca
+#define ASIX_VENDOR_ID		0x0b95
 
 static const struct usb_device_id	products[] = {
 /* BLACKLIST !!
@@ -821,6 +823,30 @@ static const struct usb_device_id	products[] = {
 	.driver_info = 0,
 },
 
+/* Aquantia AQtion USB to 5GbE Controller (based on AQC111U) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(AQUANTIA_VENDOR_ID, 0xc101,
+				      USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* ASIX USB 3.1 Gen1 to 5G Multi-Gigabit Ethernet Adapter(based on AQC111U) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(ASIX_VENDOR_ID, 0x2790, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* ASIX USB 3.1 Gen1 to 2.5G Multi-Gigabit Ethernet Adapter(based on AQC112U) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(ASIX_VENDOR_ID, 0x2791, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
 /* WHITELIST!!!
  *
  * CDC Ether uses two interfaces, not necessarily consecutive.