[media] v4l: mt9v032: Do not unset master_mode

The power_on function of the driver resets the chip and sets the
CHIP_CONTROL register to 0. This switches the operating mode to slave.
The s_stream function sets the correct mode. But this caused problems on
a board where the camera chip is operated as master. The camera started
after a random amount of time streaming an image, I observed between 10
and 300 seconds.

The STRFM_OUT and STLN_OUT pins are not connected on this board which
may cause some issues in slave mode. I could not find any documentation
about this.

Keeping the chip in master mode after the reset helped to fix this
issue for me.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This commit is contained in:
Markus Pargmann 2015-12-14 12:41:52 -02:00 committed by Mauro Carvalho Chehab
parent f823a3fd4b
commit 78060d5195
1 changed files with 3 additions and 3 deletions

View File

@ -348,7 +348,8 @@ static int mt9v032_power_on(struct mt9v032 *mt9v032)
if (ret < 0)
return ret;
return regmap_write(map, MT9V032_CHIP_CONTROL, 0);
return regmap_write(map, MT9V032_CHIP_CONTROL,
MT9V032_CHIP_CONTROL_MASTER_MODE);
}
static void mt9v032_power_off(struct mt9v032 *mt9v032)
@ -420,8 +421,7 @@ __mt9v032_get_pad_crop(struct mt9v032 *mt9v032, struct v4l2_subdev_pad_config *c
static int mt9v032_s_stream(struct v4l2_subdev *subdev, int enable)
{
const u16 mode = MT9V032_CHIP_CONTROL_MASTER_MODE
| MT9V032_CHIP_CONTROL_DOUT_ENABLE
const u16 mode = MT9V032_CHIP_CONTROL_DOUT_ENABLE
| MT9V032_CHIP_CONTROL_SEQUENTIAL;
struct mt9v032 *mt9v032 = to_mt9v032(subdev);
struct v4l2_rect *crop = &mt9v032->crop;